Analog video signals on VGA or DVI-A (analog part of DVI-I)
don't support audio, so avoid calling any audio related
functions on analog signals.
Stereo sync was not set up for analog signals in the legacy
display code either, so there is no loss of functionality if
we omit it from DC for now.
Also add a dc_is_rgb_signal similar to other dc_is_*_signal.
v2:
Added comment to clarify what we mean by RGB in this context.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We will use this for validating the pixel clock when
an analog monitor is connected to VGA or DVI-I connectors.
For reference, see the legacy display code:
amdgpu_connector_vga_mode_valid
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The SelectCRTC_Source command will be used to change which CRTC
should be connected to which encoder.
For reference, see the legacy display code:
amdgpu_atombios_encoder_set_crtc_source
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable the codebase to use encoder_control()
when the encoder engine is one of the DACs.
The BIOS parser already supports calling the DAC1EncoderControl
function from the VBIOS, but it was not exposed anywhere.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are going to support analog encoders as well, not just digital,
so we need to make space for them in various arrays.
v2: Fix typo.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The new analog bit will be used with DVI-I connectors.
DVI-I connectors can connect to both digital and analog monitors
and this bit will help distinguish between those.
v2:
Sanitize analog bit based on connector type.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a test that checks, for the old pre-CNVI devices, that
PCI IDs listed in the PCI IDs table will also match in the
config table. Newer ones we test against our database of
devices, but the current database doesn't go back that far,
so at least this checks against the PCI IDs the driver has.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250915113137.eb728b270d46.Ie5754f4201b807eb0d55feb339a728fc0b42e8bf@changeid
iwlmld is used since API 97 and for wifi7 devices.
Since APIs < 97 are no longer supported on such devices,
we can remove the API check and always load iwlmld for the wifi7
devices.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250915113137.45ab33fcdc00.Ia3a40b687b75c872cf7e7a19331a014bccf5f2d6@changeid
When the throughput count reaches the threshold, EMLSR is no longer
blocked by throughput.
This doesn't mean that EMLSR will be activated immediately, since there
might be other reasons that block EMLSR.
When the throughput blocker is not set, check_tpt_wk should run every 5
seconds and check if the throughput blocker should be set (if the
throughtput counter dropped).
If not, it should reschedule itself.
In the current code, the worker will reschedule itself only if we are in
EMLSR. This is wrong, since we might be in a case where the throughput
blocker is not set but we are not in EMLSR, and then we will never check
again the throughput counters (and block EMLSR if needed).
Fix this by rescheduling the worker also when EMLSR is not active.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250915113137.2a9cf2b2529d.I8284c0da9597e4c963e38ae133384f6f42044499@changeid
The function svm_range_validate_and_map() was freeing `range` when
amdgpu_hmm_range_get_pages() failed. But later, the code still used the
same `range` pointer and freed it again. This could cause a
use-after-free and double-free issue.
The fix sets `range = NULL` right after it is freed and checks for
`range` before using or freeing it again.
v2: Removed duplicate !r check in the condition for clarity.
v3: In amdgpu_hmm_range_get_pages(), when hmm_range_fault() fails, we
kvfree(pfns) but leave the pointer in hmm_range->hmm_pfns still pointing
to freed memory. The caller (or amdgpu_hmm_range_free(range)) may try to
free range->hmm_range.hmm_pfns again, causing a double free, Setting
hmm_range->hmm_pfns = NULL immediately after kvfree(pfns) prevents both
double free. (Philip)
In svm_range_validate_and_map(), When r == 0, it means success → range
is not NULL. When r != 0, it means failure → already made range = NULL.
So checking both (!r && range) is unnecessary because the moment r == 0,
we automatically know range exists and is safe to use. (Philip)
Fixes: 737da5363c ("drm/amdgpu: update the functions to use amdgpu version of hmm")
Reported by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Philip Yang <Philip.Yang@amd.com>
Cc: Sunil Khatri <sunil.khatri@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Philip Yang<Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit abfc01077d ("sched: Fix do_set_cpus_allowed() locking")
overlooked that __balance_push_cpu_stop() calls select_fallback_rq()
with rq->lock held. This makes that set_cpus_allowed_force() will
recursively take rq->lock and the machine locks up.
Run select_fallback_rq() earlier, without holding rq->lock. This opens
up a race window where a task could get migrated out from under us, but
that is harmless, we want the task migrated.
select_fallback_rq() itself will not be subject to concurrency as it
will be fully serialized by p->pi_lock, so there is no chance of
set_cpus_allowed_force() getting called with different arguments and
selecting different fallback CPUs for one task.
Fixes: abfc01077d ("sched: Fix do_set_cpus_allowed() locking")
Reported-by: Jan Polensky <japo@linux.ibm.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Jan Polensky <japo@linux.ibm.com>
Closes: https://lore.kernel.org/oe-lkp/202510271206.24495a68-lkp@intel.com
Link: https://patch.msgid.link/20251027110133.GI3245006@noisy.programming.kicks-ass.net
we need to unreserve the bo's too during clean up along
with freeing the memory of context.
Fixes: 7bb02a34c2 ("drm/amdkfd: add missing return value check for range")
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The CSA and EOP buffers have different alignement requirements.
Hardcode them for now as a bug fix. A proper query will be added in
a subsequent patch.
v2: verify gfx shadow helper callback (Prike)
Fixes: 9e46b8bb05 ("drm/amdgpu: validate userq buffer virtual address and size")
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move dequeue user queues and destroy user queues from
kfd_process_wq_release to mmu notifier release callback, to ensure no
system memory access from GPU because the process memory is going to
free from CPU after mmu release notifier callback returns.
Destroy queue releases the svm prange queue_refcount, this also removes
fake flase positive warning message "Freeing queue vital buffer" message
if application crash or killed.
Suggested-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_hmm_range_alloc could fails in case of low
memory condition and hence we should have a check
for the return value.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC determines the DRM connector type based on the
signal type, which becomes problematic when a connector may
support different signal types, such as DVI-I.
With this patch, it is now determined according to the actual
connector type for DVI-D and DVI-I connectors.
Also set the HPD (hotplug detection) flag for DVI-I connectors
to prevent regressing their digital functionality, which has
been already working.
A subsequent commit will also implement polling for DVI-I.
v2:
Only use connector type for DVI to prevent regressions
for other signal types.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit refactors the AMDGPU userqueue management subsystem to replace
IDR (ID Allocation) with XArray for improved performance, scalability, and
maintainability. The changes address several issues with the previous IDR
implementation and provide better locking semantics.
Key changes:
1. **Global XArray Introduction**:
- Added `userq_doorbell_xa` to `struct amdgpu_device` for global queue tracking
- Uses doorbell_index as key for efficient global lookup
- Replaces the previous `userq_mgr_list` linked list approach
2. **Per-process XArray Conversion**:
- Replaced `userq_idr` with `userq_mgr_xa` in `struct amdgpu_userq_mgr`
- Maintains per-process queue tracking with queue_id as key
- Uses XA_FLAGS_ALLOC for automatic ID allocation
3. **Locking Improvements**:
- Removed global `userq_mutex` from `struct amdgpu_device`
- Replaced with fine-grained XArray locking using XArray's internal spinlocks
4. **Runtime Idle Check Optimization**:
- Updated `amdgpu_runtime_idle_check_userq()` to use xa_empty
5. **Queue Management Functions**:
- Converted all IDR operations to equivalent XArray functions:
- `idr_alloc()` → `xa_alloc()`
- `idr_find()` → `xa_load()`
- `idr_remove()` → `xa_erase()`
- `idr_for_each()` → `xa_for_each()`
Benefits:
- **Performance**: XArray provides better scalability for large numbers of queues
- **Memory Efficiency**: Reduced memory overhead compared to IDR
- **Thread Safety**: Improved locking semantics with XArray's internal spinlocks
v2: rename userq_global_xa/userq_xa to userq_doorbell_xa/userq_mgr_xa
Remove xa_lock and use its own lock.
v3: Set queue->userq_mgr = uq_mgr in amdgpu_userq_create()
v4: use xa_store_irq (Christian)
hold the read side of the reset lock while creating/destroying queues and the manager data structure. (Chritian)
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following update:
- Fix incorrect return of vblank enable on unconfigured crtc
- Add HDR workaround for a specific eDP
- Make observers const-correct
- Add lock descriptor to check_update
- Update cursor offload assignments
- Add dc interface to log pre os firmware information
- Init dispclk from bootup clock for DCN315
- Remove dc param from check_update
- Update link encoder assignment
- Add more DC HW state info to underflow logging
- Rename dml2 to dml2_0 folder
- Fix notification of vtotal to DMU for cursor offload
- Fix wrong index for DCN401 cursor offload
- Add opp count validation to dml2.1
- Fix DMUB reset sequence for DCN32
- Bump minimum for frame_warn_limit
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
- Extend reply debug flags, define a new bit as debug_log_enabled
- Replace the padding to frame_skip_number in struct
dmub_cmd_replay_set_coasting_vtotal_data
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Return -EINVAL when userspace asks us to enable vblank on a crtc that is
not yet enabled.
Suggested-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1856
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Some eDP panels suffer from flicking when HDR is enabled in KDE or
Gnome.
This add another quirk to worksaround to skip VSC that is incompatible
with an eDP panel.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/4452
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Observers which do not modify their pointer arguments should take
them as const. This clearly signals their intent to the caller,
making it clear that the function is safe to call multiple times,
or remove the call if the result is no longer necessary.
[How]
Made const-correct all of the functions below:
* full_update_required[_weak]
* fast_updates_exist
* fast_update_only
* dc_can_clear_cursor_limit
* dc_stream_get_status (added const named overload)
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DM locks the global DC lock during all updates, even if multiple
updates touch different resources and could be run in parallel.
[How]
Add extra enum specifying which kind of resources should be locked.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
- Cursor lines per chunk must be assigned from hubp->att and not
hubp->pos (the one in hubp->pos is unassigned)
- In DCN401 DPP, cur0_enable in attribute struct must be assigned
as this is the field passed to DMU
- DCN401 should not program position in driver if offload is enabled
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Pre os firmware information is useful to debug pre os to post os fw
transition issues.
[How]
Add dc interface dc_log_preos_dmcub_info() to log pre os firmware
information.
Reviewed-by: Cruise Hung <cruise.hung@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Driver does not pick up and save vbios's clocks during init clocks,
the dispclk in clk_mgr will keep 0.
OS might change the timing (lower the pixel clock) after boot.
Then driver will set the dispclk to lower when safe_to_lower is false,
for in clk_mgr dispclk is zero, it's illegal and causes garbage.
[How]
Dump and save the vbios's clocks, and init the dispclk in
dcn315_init_clocks.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dc_check_update_surfaces_for_stream should not have access to entire
DC, especially not a mutable one. Concurrent checks should be able
to run independently of one another, without risk of changing state.
[How]
* Replace dc and stream_status structs with new dc_check_config.
* Move required fields from dc_debug and dc_caps to dc_check_config.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Map a link encoder instance matching stream encoder instance
if possible.
[How]
Get the stream encoder instance and assign the same link
encoder instance if available.
Reviewed-by: PeiChen Huang <peichen.huang@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Debugging underflow issues frequently requires knowing the
HW state at the time of underflow. To enable capturing this
HW state information, interface functions are needed for the
various DC HW blocks.
[How]
This change adds the interface functions to read HW state for
the following DC HW blocks:
- HUBBUB
- HUBP
- DPP
- MPC
- OPP
- DSC
- OPTC
- DCCG
Reviewed-by: George Shen <george.shen@amd.com>
Signed-off-by: Karen Chen <Karen.Chen@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dml2 folder contains all logic for all versions of DML2
This is currently DML2.0 and DML2.1.
Rename dml2 to dml2_0 folder to reflect this better (dml2_0
for DML2.0).
[How]
Rename dml2 to dml2_0 folder and update dml2 references to
use dml2_0 folder.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: waynelin <Wayne.Lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
It was placed after the early return and the notification is never sent.
[How]
Place it after .set_drr and before the return.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Payloads are ignored because the wrong index is written as part of the
pipe update implementation for DCN401.
[How]
Align it to the DCN35 implementation and ensure the + 1 is added.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Newer asics can have mismatching dpp and opp counts and
dml needs to account for this.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Backport reset sequence fixes implemented on DCN401 to DCN32 to address
stability issues when resetting the DMUB.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The bigger of CONFIG_FRAME_WARN and frame_warn_limit is used to
trigger warnings about large stack frames. The dml_core_mode_support()
stack frame has grown to 2056.
[How]
Update frame_warn_limit to 2056 so that CONFIG_FRAME_WARN of 2048 doesn't
cause a failure.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4609
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Mario Limonciello <superm1@kernel.org>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The work item may be scheduled relatively far in the future. As the
event happens at a specific point in time, the normal timer accuracy is
not sufficient in that case.
Switch to use wiphy_hrtimer_work so that the accuracy is sufficient. To
make this work, use the same clock to store the timestamp.
CC: stable@vger.kernel.org
Fixes: ec3252bff7 ("wifi: mac80211: use wiphy work for channel switch")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251028125710.68258c7e4ac4.I4ff2b2cdffbbf858bf5f08baccc7a88c4f9efe6f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The work item may be scheduled relatively far in the future. As the
event happens at a specific point in time, the normal timer accuracy is
not sufficient in that case.
Switch to use wiphy_hrtimer_work so that the accuracy is sufficient.
CC: stable@vger.kernel.org
Fixes: 8eb8dd2ffb ("wifi: mac80211: Support link removal using Reconfiguration ML element")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251028125710.24a7b54e9e37.I063c5c15bf7672f94cea75f83e486a3ca52d098f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The work item may be scheduled relatively far in the future. As the
event happens at a specific point in time, the normal timer accuracy is
not sufficient in that case.
Switch to use wiphy_hrtimer_work so that the accuracy is sufficient.
CC: stable@vger.kernel.org
Fixes: 702e80470a ("wifi: mac80211: support handling of advertised TID-to-link mapping")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251028125710.83c2c611545e.I35498a6d883ea24b0dc4910cf521aa768d2a0e90@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The normal timer mechanism assume that timeout further in the future
need a lower accuracy. As an example, the granularity for a timer
scheduled 4096 ms in the future on a 1000 Hz system is already 512 ms.
This granularity is perfectly sufficient for e.g. timeouts, but there
are other types of events that will happen at a future point in time and
require a higher accuracy.
Add a new wiphy_hrtimer_work type that uses an hrtimer internally. The
API is almost identical to the existing wiphy_delayed_work and it can be
used as a drop-in replacement after minor adjustments. The work will be
scheduled relative to the current time with a slack of 1 millisecond.
CC: stable@vger.kernel.org # 6.4+
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251028125710.7f13a2adc5eb.I01b5af0363869864b0580d9c2a1770bafab69566@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
commit 0887054d14 ("drm/amd: Drop abm_level property") dropped the
abm level property in favor of sysfs control. Since then there have
been discussions that compositors showed an interest in modifying
a vendor specific property instead.
So re-introduce the abm level property, but with different semantics.
Rather than being an integer it's now an enum. One of the enum options
is 'sysfs', and that is because there is still a sysfs file for use by
userspace when the compositor doesn't support this property.
If usespace has not modified this property, the default value will
be for sysfs to control it. Once userspace has set the property stop
allowing sysfs control.
The property is only attached to non-OLED eDP panels.
Cc: Xaver Hugl <xaver.hugl@kde.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The ftrace blktrace path allocates buffers and writes trace events but
was using the wrong recording function. After
commit 4d8bc7bd4f ("blktrace: move ftrace blk_io_tracer to blk_io_trace2"),
the ftrace interface was moved to use blk_io_trace2 format, but
__blk_add_trace() still called record_blktrace_event() which writes in
blk_io_trace (v1) format.
This causes critical data corruption:
- blk_io_trace (v1) has 32-bit 'action' field at offset 28
- blk_io_trace2 (v2) has 32-bit 'pid' at offset 28 and 64-bit 'action'
at offset 32
- When record_blktrace_event() writes to a v2 buffer:
* Writing pid (offset 32 in v1) corrupts the v2 action field
* Writing action (offset 28 in v1) corrupts the v2 pid field
* The 64-bit action is truncated to 32-bit via lower_32_bits()
Fix by:
1. Adding version switch to select correct format (v1 vs v2)
2. Calling appropriate recording function based on version
3. Defaulting to v2 for ftrace (as intended by commit 4d8bc7bd4f)
4. Adding WARN_ONCE for unexpected version values
Without this patch :-
linux-block (for-next) # sh reproduce_blktrace_bug.sh
dd-14242 [033] d..1. 3903.022308: Unknown action 36a2
dd-14242 [033] d..1. 3903.022333: Unknown action 36a2
dd-14242 [033] d..1. 3903.022365: Unknown action 36a2
dd-14242 [033] d..1. 3903.022366: Unknown action 36a2
dd-14242 [033] d..1. 3903.022369: Unknown action 36a2
The action field is corrupted because:
- ftrace allocated blk_io_trace2 buffer (64 bytes)
- But called record_blktrace_event() (writes v1, 48 bytes)
- Field offsets don't match, causing corruption
The hex value shown 0x30e3 is actually a PID, not an action code!
linux-block (for-next) #
linux-block (for-next) #
linux-block (for-next) # sh reproduce_blktrace_bug.sh
Trace output looks correct:
dd-2420 [019] d..1. 59.641742: 251,0 Q RS 0 + 8 [dd]
dd-2420 [019] d..1. 59.641775: 251,0 G RS 0 + 8 [dd]
dd-2420 [019] d..1. 59.641784: 251,0 P N [dd]
dd-2420 [019] d..1. 59.641785: 251,0 U N [dd] 1
dd-2420 [019] d..1. 59.641788: 251,0 D RS 0 + 8 [dd]
Fixes: 4d8bc7bd4f ("blktrace: move ftrace blk_io_tracer to blk_io_trace2")
Signed-off-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The WARN_ON_ONCE introduced in
commit f9ee38bbf7 ("blktrace: add block trace commands for zone operations")
triggers kernel warnings when zone operations are traced with blktrace
version 1. This can spam the kernel log during normal operation with
zoned block devices when userspace is using the legacy blktrace
protocol.
Currently blktrace implementation drops newly added REQ_OP_ZONE_XXX
when blktrace userspce version is set to 1.
Remove the WARN_ON_ONCE and quietly filter these events. Add a
rate-limited debug message to help diagnose potential issues without
flooding the kernel log. The debug message can be enabled via dynamic
debug when needed for troubleshooting.
This approach is more appropriate as encountering zone operations with
blktrace v1 is an expected condition that should be handled gracefully
rather than warned about, since users may be running older blktrace
userspace tools that only support version 1 of the protocol.
With this patch :-
linux-block (for-next) # git log -1
commit c8966006a0971d2b4bf94c0426eb7e4407c6853f (HEAD -> for-next)
Author: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Date: Mon Oct 27 19:26:53 2025 -0700
blktrace: use debug print to report dropped events
linux-block (for-next) # cdblktests
blktests (master) # ./check blktrace
blktrace/001 (blktrace zone management command tracing) [passed]
runtime 3.805s ... 3.889s
blktests (master) # dmesg -c
blktests (master) # echo "file kernel/trace/blktrace.c +p" > /sys/kernel/debug/dynamic_debug/control
blktests (master) # ./check blktrace
blktrace/001 (blktrace zone management command tracing) [passed]
runtime 3.889s ... 3.881s
blktests (master) # dmesg -c
[ 77.826237] blktrace: blktrace v1 cannot trace zone operation 0x1000190001
[ 77.826260] blktrace: blktrace v1 cannot trace zone operation 0x1000190004
[ 77.826282] blktrace: blktrace v1 cannot trace zone operation 0x1001490007
[ 77.826288] blktrace: blktrace v1 cannot trace zone operation 0x1001890008
[ 77.826343] blktrace: blktrace v1 cannot trace zone operation 0x1000190001
[ 77.826347] blktrace: blktrace v1 cannot trace zone operation 0x1000190004
[ 77.826350] blktrace: blktrace v1 cannot trace zone operation 0x1001490007
[ 77.826354] blktrace: blktrace v1 cannot trace zone operation 0x1001890008
[ 77.826373] blktrace: blktrace v1 cannot trace zone operation 0x1000190001
[ 77.826377] blktrace: blktrace v1 cannot trace zone operation 0x1000190004
blktests (master) # echo "file kernel/trace/blktrace.c -p" > /sys/kernel/debug/dynamic_debug/control
blktests (master) # ./check blktrace
blktrace/001 (blktrace zone management command tracing) [passed]
runtime 3.881s ... 3.824s
blktests (master) # dmesg -c
blktests (master) #
Reported-by: syzbot+153e64c0aa875d7e4c37@syzkaller.appspotmail.com
Fixes: f9ee38bbf7 ("blktrace: add block trace commands for zone operations")
Signed-off-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The function amdgpu_virt_get_dynamic_data_info() writes a 64-bit size
value. In two places (amdgpu_bios.c and amdgpu_discovery.c), the code
passed the address of a smaller variable by casting it to u64 *, which
is unsafe.
This could make the function write more bytes than the smaller variable
can hold, possibly overwriting nearby memory. Reported by static
analysis tools.
v2: Dynamic region size comes from the host (SR-IOV setup) and is always
fixed to 5 MB. (Lijo/Ellen)
5 MB easily fits inside a 32-bit value, so using a 64-bit type is not
needed. It also avoids extra type casts
Fixes: b4a8fcc782 ("drm/amdgpu: Add logic for VF ipd and VF bios to init from dynamic crit_region offsets")
Reported by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Ellen Pan <yunru.pan@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Revert an ath10k change which improved QCA6174 but completely broke
QCA988x and QCA9984.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ/mtSHzPUi16IfDEksFbugiYzLewUCaP+IgQAKCRAsFbugiYzL
e3DTAP4vHZL08IGNQIk1MadYfOV54tbl50xYKKrXOUdt5EtCVwEA03iwiFfoWJuK
SI64Zb1Nlro7K4m8jAiLJkg29lq51A4=
=45GS
-----END PGP SIGNATURE-----
Merge tag 'ath-current-20251027' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git update for v6.18-rc4
Revert an ath10k change which improved QCA6174 but completely broke
QCA988x and QCA9984.
==================
Link: https://patch.msgid.link/e7e3ab9f-f477-4e84-8a5c-609fa1834624@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Due to low memory or when num of pages is too big to be
accomodated, allocation could fail for pfn's.
Chekc hmm_pfns for NULL before calling the kvfree for the it.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch extends the VCN_RESET capability check to include pgm 7 when the firmware version is 0x07551400 or newer.
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
