Replace the now deprecated kmap_atomic() with kmap_local_page().
The memcpy does not need atomic semantics, and the removed comment
is now stale - this patch now makes it in sync again. Last but not
least, highmem is going to be removed[0].
Link: https://lore.kernel.org/all/4ff89b72-03ff-4447-9d21-dd6a5fe1550f@app.fastmail.com/ [0]
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Since commit 88bbe85dcd ("irqchip: bcm2836: Move SMP startup code to
arch/arm (v2)") the bcm2836-l1-intc block on bcm2711 is only used as a
base address for the smp_boot_secondary hook on 32 bit kernels. It is
not used as an interrupt controller.
Drop the binding requirement for interrupt-controller and interrupt-cells
to satisfy validation on this platform.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20241220-dt-bcm2712-fixes-v5-3-cbbf13d2e97a@raspberrypi.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Commit 6cfcbe548a ("dt-bindings: display: Add BCM2712 HVS bindings")
added the compatible string for BCM2712, but missed out that
the number of interrupts and clocks changed too.
The driver commit 7687a12153 ("drm/vc4: hvs: Add support for BCM2712
HVS") also requires that both interrupts and clocks are named, so the
relevant -names properties are also added to "required" for BCM2712.
Update to validate clock, interrupts, and their names for the BCM2712
variant. (There should be no change in the binding requirements for
the other variants).
Fixes: 6cfcbe548a ("dt-bindings: display: Add BCM2712 HVS bindings")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patch.msgid.link/20241220-dt-bcm2712-fixes-v5-2-cbbf13d2e97a@raspberrypi.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Commit 62948c62ab ("dt-bindings: display: Add BCM2712 HDMI bindings")
added the compatible strings for BCM2712, but missed out that the
number of interrupts changed with the "wakeup" interrupt not present in
the BCM7212.
Update the schema to correct the interrupt requirements for BCM2712.
(Requirements for BCM2711 should be unchanged).
Fixes: 62948c62ab ("dt-bindings: display: Add BCM2712 HDMI bindings")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patch.msgid.link/20241220-dt-bcm2712-fixes-v5-1-cbbf13d2e97a@raspberrypi.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The crypto/zstd module has a double-free bug that occurs when multiple
tfms are allocated and freed.
The issue happens because zstd_streams (per-CPU contexts) are freed in
zstd_exit() during every tfm destruction, rather than being managed at
the module level. When multiple tfms exist, each tfm exit attempts to
free the same shared per-CPU streams, resulting in a double-free.
This leads to a stack trace similar to:
BUG: Bad page state in process kworker/u16:1 pfn:106fd93
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x106fd93
flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff)
page_type: 0xffffffff()
raw: 0017ffffc0000000 dead000000000100 dead000000000122 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: nonzero entire_mapcount
Modules linked in: ...
CPU: 3 UID: 0 PID: 2506 Comm: kworker/u16:1 Kdump: loaded Tainted: G B
Hardware name: ...
Workqueue: btrfs-delalloc btrfs_work_helper
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
bad_page+0x71/0xd0
free_unref_page_prepare+0x24e/0x490
free_unref_page+0x60/0x170
crypto_acomp_free_streams+0x5d/0xc0
crypto_acomp_exit_tfm+0x23/0x50
crypto_destroy_tfm+0x60/0xc0
...
Change the lifecycle management of zstd_streams to free the streams only
once during module cleanup.
Fixes: f5ad93ffb5 ("crypto: zstd - convert to acomp")
Cc: stable@vger.kernel.org
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
After commit 25524b6190 ("fs/nls: Fix utf16 to utf8 conversion"),
the return values of utf8_to_utf32() and utf32_to_utf8() are
inconsistent when encountering an error: utf8_to_utf32() returns -1,
while utf32_to_utf8() returns errno codes. Fix this inconsistency
by modifying utf8_to_utf32() to return errno codes as well.
Fixes: 25524b6190 ("fs/nls: Fix utf16 to utf8 conversion")
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251129111535.8984-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add TDP data for laptop model GA503QR.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20251129142621.152027-1-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The hp-wmi driver has a number of arrays that are getting new entries
and all/most entries have been added to the end of the array. As a
result, the numerical order is mixed up in a few entries.
Reorder the array entries. Split lines for each two leading chars to
make the arrays easier to read.
Add also trailing commas.
Link: https://patch.msgid.link/20251128120215.4450-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Remove stray spaces/tabs introduced with commit 56651128e2 ("MIPS: Fix
idle VS timer enqueue") and add missing indentation for a branch delay
slot.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
While pausing submissions, it is possible to encouner an exec queue
which is during creation, and therefore doesn't have a valid xe_lrc
struct reference.
Protect agains such situation, by checking for NULL before access.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Fixes: c25c1010df ("drm/xe/vf: Replay GuC submission state on pause / unpause")
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251124222853.1900800-1-tomasz.lis@intel.com
(cherry picked from commit 07cf4b864f)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The LRC software ring tail is reset to the first unsignaled pending
job's head.
Fix the re-emission logic to begin submitting from the first unsignaled
job detected, rather than scanning all pending jobs, which can cause
imbalance.
v2:
- Include missing local changes
v3:
- s/skip_replay/restore_replay (Tomasz)
Fixes: c25c1010df ("drm/xe/vf: Replay GuC submission state on pause / unpause")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://patch.msgid.link/20251121152750.240557-1-matthew.brost@intel.com
(cherry picked from commit 00937fe192)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
When the pagefault handling code was moved to a new file, an extra
drm_exec_init() was added to the VMA path. This call is unnecessary because
xe_validation_ctx_init() already performs a drm_exec_init(), resulting in a
memory leak reported by kmemleak.
Remove the redundant drm_exec_init() from the VMA pagefault handling code.
Fixes: fb544b8445 ("drm/xe: Implement xe_pagefault_queue_work")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: intel-xe@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251120161435.3674556-1-mika.kuoppala@linux.intel.com
(cherry picked from commit 62519b77ae)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The function opencodes for_each_set_bit() macro, which makes it bulky.
Using the proper API makes all the housekeeping code go away.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Convert GPIO-connected buttons and LEDs on MTX1 board to software
nodes/properties, so that support for platform data can be removed
from gpio-keys driver (which will rely purely on generic device
properties for configuration).
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Remove unnecessary __GFP_HIGHMEM masking, which was introduced with
commit 3e14fb19ad ("mips: convert various functions to use ptdescs").
GFP_KERNEL doesn't contain __GFP_HIGHMEM.
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Since commit e424054000 ("MIPS: Tracing: Reduce the overhead of
dynamic Function Tracer"), the macro UASM_i_LA_mostly has been used,
and this macro can generate more than 2 instructions. At the same
time, the code in ftrace assumes that no more than 2 instructions can
be generated, which is why it stores them in an int[2] array. However,
as previously noted, the macro UASM_i_LA_mostly (and now UASM_i_LA)
causes a buffer overflow when _mcount is beyond 32 bits. This leads to
corruption of the variables located in the __read_mostly section.
This corruption was observed because the variable
__cpu_primary_thread_mask was corrupted, causing a hang very early
during boot.
This fix prevents the corruption by avoiding the generation of
instructions if they could exceed 2 instructions in
length. Fortunately, insn_la_mcount is only used if the instrumented
code is located outside the kernel code section, so dynamic ftrace can
still be used, albeit in a more limited scope. This is still
preferable to corrupting memory and/or crashing the kernel.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Commit 41528ba6af ("MIPS: DTS: Only build subdir of current platform")
broke building of all DTBs when CONFIG_OF_ALL_DTBS is enabled unless all
the various kconfig options were also enabled. The only effect that commit
had was getting rid of some harmless build lines such as:
AR arch/mips/boot/dts/mti/built-in.a
Those lines were part of the built-in DTB support. Since commit
04e4ec98e4 ("MIPS: migrate to generic rule for built-in DTBs"), how the
built-in DTBs are handled has changed and those lines are no longer
generated, so revert to the prior behavior.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Update loongson1_defconfig to reflect recent Kconfig changes:
- Replace CONFIG_MTD_NAND_LOONGSON1 with CONFIG_MTD_NAND_LOONGSON,
since commit 7a1e3a452a ("mtd: rawnand: loongson1: Rename the
prefix from ls1x to loongson").
- Enable CONFIG_ETHTOOL_NETLINK, since commit 9ff2aa4206 ("net:
ethtool: mm: extract stmmac verification logic into common library")
makes STMMAC_ETH depend on it.
In addition:
- Enable CONFIG_JUMP_LABEL to allow optimized static branch handling.
- Disable unnecessary options.
- Enable CONFIG_TEST_DHRY as a module.
Fixes: 7a1e3a452a ("mtd: rawnand: loongson1: Rename the prefix from ls1x to loongson")
Fixes: 9ff2aa4206 ("net: ethtool: mm: extract stmmac verification logic into common library")
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
With MIPS, it is possible to have SMP enabled without HOTPLUG_CPU
selected. However, in kernel/cpu.c, some code that uses
HOTPLUG_PARALLEL also requires HOTPLUG_CPU to be selected. Therefore,
we should fix the HOTPLUG_PARALLEL dependency to depend on
HOTPLUG_CPU, not just SMP.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202510270120.21wA1aX1-lkp@intel.com/
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
* kvm-arm64/nv-xnx-haf: (22 commits)
: Support for FEAT_XNX and FEAT_HAF in nested
:
: Add support for a couple of MMU-related features that weren't
: implemented by KVM's software page table walk:
:
: - FEAT_XNX: Allows the hypervisor to describe execute permissions
: separately for EL0 and EL1
:
: - FEAT_HAF: Hardware update of the Access Flag, which in the context of
: nested means software walkers must also set the Access Flag.
:
: The series also adds some basic support for testing KVM's emulation of
: the AT instruction, including the implementation detail that AT sets the
: Access Flag in KVM.
KVM: arm64: at: Update AF on software walk only if VM has FEAT_HAFDBS
KVM: arm64: at: Use correct HA bit in TCR_EL2 when regime is EL2
KVM: arm64: Document KVM_PGTABLE_PROT_{UX,PX}
KVM: arm64: Fix spelling mistake "Unexpeced" -> "Unexpected"
KVM: arm64: Add break to default case in kvm_pgtable_stage2_pte_prot()
KVM: arm64: Add endian casting to kvm_swap_s[12]_desc()
KVM: arm64: Fix compilation when CONFIG_ARM64_USE_LSE_ATOMICS=n
KVM: arm64: selftests: Add test for AT emulation
KVM: arm64: nv: Expose hardware access flag management to NV guests
KVM: arm64: nv: Implement HW access flag management in stage-2 SW PTW
KVM: arm64: Implement HW access flag management in stage-1 SW PTW
KVM: arm64: Propagate PTW errors up to AT emulation
KVM: arm64: Add helper for swapping guest descriptor
KVM: arm64: nv: Use pgtable definitions in stage-2 walk
KVM: arm64: Handle endianness in read helper for emulated PTW
KVM: arm64: nv: Stop passing vCPU through void ptr in S2 PTW
KVM: arm64: Call helper for reading descriptors directly
KVM: arm64: nv: Advertise support for FEAT_XNX
KVM: arm64: Teach ptdump about FEAT_XNX permissions
KVM: arm64: nv: Forward FEAT_XNX permissions to the shadow stage-2
...
Signed-off-by: Oliver Upton <oupton@kernel.org>
* kvm-arm64/vgic-lr-overflow: (50 commits)
: Support for VGIC LR overflows, courtesy of Marc Zyngier
:
: Address deficiencies in KVM's GIC emulation when a vCPU has more active
: IRQs than can be represented in the VGIC list registers. Sort the AP
: list to prioritize inactive and pending IRQs, potentially spilling
: active IRQs outside of the LRs.
:
: Handle deactivation of IRQs outside of the LRs for both EOImode=0/1,
: which involves special consideration for SPIs being deactivated from a
: different vCPU than the one that acked it.
KVM: arm64: Convert ICH_HCR_EL2_TDIR cap to EARLY_LOCAL_CPU_FEATURE
KVM: arm64: selftests: vgic_irq: Add timer deactivation test
KVM: arm64: selftests: vgic_irq: Add Group-0 enable test
KVM: arm64: selftests: vgic_irq: Add asymmetric SPI deaectivation test
KVM: arm64: selftests: vgic_irq: Perform EOImode==1 deactivation in ack order
KVM: arm64: selftests: vgic_irq: Remove LR-bound limitation
KVM: arm64: selftests: vgic_irq: Exclude timer-controlled interrupts
KVM: arm64: selftests: vgic_irq: Change configuration before enabling interrupt
KVM: arm64: selftests: vgic_irq: Fix GUEST_ASSERT_IAR_EMPTY() helper
KVM: arm64: selftests: gic_v3: Disable Group-0 interrupts by default
KVM: arm64: selftests: gic_v3: Add irq group setting helper
KVM: arm64: GICv2: Always trap GICV_DIR register
KVM: arm64: GICv2: Handle deactivation via GICV_DIR traps
KVM: arm64: GICv2: Handle LR overflow when EOImode==0
KVM: arm64: GICv3: Force exit to sync ICH_HCR_EL2.En
KVM: arm64: GICv3: nv: Plug L1 LR sync into deactivation primitive
KVM: arm64: GICv3: nv: Resync LRs/VMCR/HCR early for better MI emulation
KVM: arm64: GICv3: Avoid broadcast kick on CPUs lacking TDIR
KVM: arm64: GICv3: Handle in-LR deactivation when possible
KVM: arm64: GICv3: Add SPI tracking to handle asymmetric deactivation
...
Signed-off-by: Oliver Upton <oupton@kernel.org>
* kvm-arm64/sea-user:
: Userspace handling of SEAs, courtesy of Jiaqi Yan
:
: Add support for processing external aborts in userspace in situations
: where the host has failed to do so, allowing the VMM to potentially
: reinject an external abort into the VM.
Documentation: kvm: new UAPI for handling SEA
KVM: selftests: Test for KVM_EXIT_ARM_SEA
KVM: arm64: VM exit to userspace to handle SEA
Signed-off-by: Oliver Upton <oupton@kernel.org>
* kvm-arm64/misc:
: Miscellaneous fixes/cleanups for KVM/arm64
:
: - Fix for need_resched warnings on non-preemptible kernels when
: tearing down a VM's stage-2
:
: - Improvements to KVM struct allocation, getting rid of pointless
: __GFP_HIGHMEM and switching to kvzalloc()
:
: - SYNC ITS configuration before injecting LPIs in vgic_lpi_stress
: selftest
KVM: arm64: Reschedule as needed when destroying the stage-2 page-tables
KVM: arm64: Split kvm_pgtable_stage2_destroy()
KVM: arm64: Only drop references on empty tables in stage2_free_walker
KVM: selftests: SYNC after guest ITS setup in vgic_lpi_stress
KVM: selftests: Assert GICR_TYPER.Processor_Number matches selftest CPU number
KVM: arm64: Use kvzalloc() for kvm struct allocation
KVM: arm64: Drop useless __GFP_HIGHMEM from kvm struct allocation
Signed-off-by: Oliver Upton <oupton@kernel.org>
In addition to generic VFIO PCI functionality, the driver implements
VFIO migration uAPI, allowing userspace to enable migration for Intel
Graphics SR-IOV Virtual Functions.
The driver binds to VF device and uses API exposed by Xe driver to
transfer the VF migration data under the control of PF device.
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex@shazbot.org>
Link: https://patch.msgid.link/20251127093934.1462188-5-michal.winiarski@intel.com
Link: https://lore.kernel.org/all/20251128125322.34edbeaf.alex@shazbot.org/
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry picked from commit 2e38c50ae4)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
A guest can write 1 to TCR_ELx.HA, making the KVM software walker update
the access flag in a table descriptor even if FEAT_HAFDBS is not present.
Avoid this by making wi->ha depend on FEAT_HAFDBS being enabled in the VM,
similar to how the software walker treats FEAT_HPDS.
This is not needed for VTCR_EL2.HA, since a guest will always write to
the in-memory copy of the register, where the HA bit is masked (set to
0) by KVM if the VM doesn't have FEAT_HAFDBS.
Fixes: c59ca4b5b0c3 ("KVM: arm64: Implement HW access flag management in stage-1 SW PTW")
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://msgid.link/20251128100946.74210-5-alexandru.elisei@arm.com
Signed-off-by: Oliver Upton <oupton@kernel.org>
According to ARM DDI 0487L.b, the HA bit in TCR_EL2 when the translation
regime is EL2 (or !ELIsInHost(EL2)) is bit 21, not 39.
Fixes: c59ca4b5b0c3 ("KVM: arm64: Implement HW access flag management in stage-1 SW PTW")
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://msgid.link/20251128100946.74210-3-alexandru.elisei@arm.com
Signed-off-by: Oliver Upton <oupton@kernel.org>
Commit 2608563b46 ("KVM: arm64: Add support for FEAT_XNX stage-2
permissions") added the KVM_PGTABLE_PROX_{UX,PX} permissions to stage 2 and
to EL2 translation regimes, but left them undocumented. Let's fix that.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://msgid.link/20251128100946.74210-2-alexandru.elisei@arm.com
Signed-off-by: Oliver Upton <oupton@kernel.org>
Clang warns (or errors with CONFIG_WERROR=y / W=e):
arch/arm64/kvm/hyp/pgtable.c:757:2: error: label at end of compound statement is a C23 extension [-Werror,-Wc23-extensions]
757 | }
| ^
With older versions of clang (15 and older) and GCC (at least the minimum
supported, 8.1), this is an unconditional hard error:
arch/arm64/kvm/hyp/pgtable.c: In function 'kvm_pgtable_stage2_pte_prot':
arch/arm64/kvm/hyp/pgtable.c:756:2: error: label at end of compound statement
default:
^~~~~~~
arch/arm64/kvm/hyp/pgtable.c:756:10: error: label at end of compound statement: expected statement
default:
^
;
Add a break statement to this default case to clear up the error/warning.
Fixes: 2608563b46 ("KVM: arm64: Add support for FEAT_XNX stage-2 permissions")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://msgid.link/20251125-arm64-kvm-hyp-pgtable-fix-c23-ext-warn-v1-1-98b506ddefbf@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
Add a basic test for AT emulation in the EL2&0 and EL1&0 translation
regimes.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://msgid.link/20251124190158.177318-16-oupton@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
Everything is in place to update the access flag at S1 and S2. Expose
support for the access flag flavor of FEAT_HAFDBS to NV guests.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://msgid.link/20251124190158.177318-15-oupton@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
Give the stage-2 walk similar treatment to stage-1: update the access
flag during the table walk and do so for any walk context.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://msgid.link/20251124190158.177318-14-oupton@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
Atomically update the Access flag at stage-1 when the guest has
configured the MMU to do so. Make the implementation choice (and liberal
interpretation of speculation) that any access type updates the Access
flag, including AT and CMO instructions.
Restart the entire walk by returning to the exception-generating
instruction in the case of a failed Access flag update.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://msgid.link/20251124190158.177318-13-oupton@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
KVM's software PTW will soon support 'hardware' updates to the access
flag. Similar to fault handling, races to update the descriptor will be
handled by restarting the instruction. Prepare for this by propagating
errors up to the AT emulation, only retiring the instruction if the walk
succeeds.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://msgid.link/20251124190158.177318-12-oupton@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
Implementing FEAT_HAFDBS in KVM's software PTWs requires the ability to
CAS a descriptor to update the in-memory value. Add an accessor to do
exactly that, coping with the fact that guest descriptors are in user
memory (duh).
While FEAT_LSE required on any system that implements NV, KVM now uses
the stage-1 PTW for non-nested use cases meaning an LL/SC implementation
is necessary as well.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://msgid.link/20251124190158.177318-11-oupton@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
