Introduce pci_epf_get_required_bar_size() helper to get the required BAR
size and backing memory size. This helper will be used to set a fixed MMIO
address as the backing memory for a BAR.
Since this helper returns both BAR size and the aligned memory size, use
two parameters, 'bar_size' and 'aligned_mem_size' to avoid confusion.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[mani: renamed helper to pci_epf_get_required_bar_size(), reworded description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20251015-vntb_msi_doorbell-v6-2-9230298b1910@nxp.com
Rename the member 'epf_bar::aligned_size' to 'epf_bar::mem_size' to better
reflect its purpose. 'aligned_size' was misleading, as it actually
represents the backing memory size allocated for the BAR rather than the
aligned size.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20251015-vntb_msi_doorbell-v6-1-9230298b1910@nxp.com
If subsequent VF FLR request is triggered when previous VF FLR
sequence is still being processed, we ignore it as not needed.
But in case of the multi-GT platforms, one GT may already finish
its VF FLR processing and will start a new sequence, which includes
new cross-GT synchronization point. However, since other GT may
be still busy with post-sync cleanup steps, this will put on hold
this new FLR sequence, which might never finish due to lack of any
future synchronization checkouts.
Add additional cross-GT FLR synchronization point when each GT
ends processing its own FLR sequence. This should also help to
cover the case when one GT fails FLR processing before reaching
the first synchronization point.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6287
Fixes: 2a8fcf7cc9 ("drm/xe/pf: Synchronize VF FLR between all GTs")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20251025124906.5264-1-michal.wajdeczko@intel.com
The quirk for Victus 15-fa1xxx wasn't working on Victus 15-fa1031nt due to a different board id. This patch enables the existing quirk for the board id 8BC8.
Tested on HP Victus 15-fa1031nt (MB 8C2D). The LED behaviour works as intended.
Signed-off-by: Eren Demir <eren.demir2479090@gmail.com>
Link: https://patch.msgid.link/20251027110208.6481-1-eren.demir2479090@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The vDSO address is added to the userspace auxiliary vectors even if the
vDSO was not allocated. When accessing the page, userspace processes
will crash.
Enforce that the allocation works.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20251013-uml-vdso-cleanup-v1-3-a079c7adcc69@weissschuh.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The clock_gettime() system call takes a pointer to
'struct __kernel_timespec', not 'struct __kernel_old_timespec'.
Right now this is not an issue as the vDSO never works with the
actual struct but only passes it through to the kernel.
Fix the prototype for consistency with the system call.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20251013-uml-vdso-cleanup-v1-1-a079c7adcc69@weissschuh.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use __core_param_cb() to parse the "slab_debug" kernel parameter instead of
the obsolescent __setup(). For now, the parameter is not exposed in sysfs,
and no get ops is provided.
There is a slight change in behavior. Before this patch, the following
parameter would silently turn on full debugging for all slabs:
slub_debug_yada_yada_gotta_love_this=hail_satan!
This syntax is now rejected, and the parameter will be passed to user
space, making the kernel a holier place.
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Link: https://patch.msgid.link/9674b34861394088c7853edf8e9d2b439fd4b42f.1761324765.git.ptesarik@suse.com
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Since the string passed to slab_debug is never modified, use pointers to
const char in all places where it is processed.
No functional changes intended.
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Reviewed-by: Christoph Lameter <cl@gentwo.org>
Link: https://patch.msgid.link/819095b921f6ae03bb54fd69ee4020e2a3aef675.1761324765.git.ptesarik@suse.com
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
There seems to be nothing preventing this driver from being compile
tested so enable that to increase build coverage.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
There seems to be nothing preventing this driver from being compile
tested so enable that to increase build coverage.
This also allows for compile testing of further Tegra drivers (e.g.
IOMMU driver).
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Add a set of test cases for cs_amp_set_efi_calibration_data().
Broadly there are two type of behavior being tested:
How the EFI is updated:
- Create a new EFI
- Overwrite part of existing content
- Overwrite part of zero-filled preallocated content
- Grow the file to append new content
And how the location within the content is chosen:
- Overwrite a specific array entry
- Overwrite an entry with the same calTarget (silicon ID)
- Overwrite a free entry
- Append after existing data
Plus some cases for error conditions.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-12-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set cs35l56_base->cal_index to the (zero-based) amp index derived
from cirrus,dev-index property.
This is so that factory calibration data will be written to the UEFI
array in the slot equal to the amp index, for compatibility with the
Windows driver.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-11-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new command 'store_uefi' to the calibrate debugfs file.
Writing this command will call cs_amp_set_efi_calibration_data()
to save the new data into a UEFI variable. This is intended to
be used after a successful factory calibration.
On systems without UEFI the write to the debugfs file will
return an error.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-10-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add cs_amp_set_efi_calibration_data() to write an amp calibration
blob to UEFI calibration variable.
The UEFI variable will be updated or created as necessary.
- If a Vendor-specific variable exists it will be updated,
else if the Cirrus variable exists it will be update
else the Cirrus variable will be created.
Some collateral changes are required:
- cs_amp_convert_efi_status() now specifically handles
EFI_WRITE_PROTECTED error.
- cs_amp_get_cal_efi_buffer() can optionally return the name,
guid and attr of the variable it found.
- cs_amp_get_cal_efi_buffer() will update the 'size' field of
the returned data blob if it is zero. The BIOS could have
pre-allocated the UEFI variable as zero-filled
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-9-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a pointer argument to cs_amp_get_efi_variable() to optionally
return the EFI variable attributes.
Originally this function internally consumed the attributes from
efi.get_variable(). The calling code did not use the attributes
so this was a small simplification.
However, when writing to a pre-existing variable we would want to
pass the existing attributes to efi.set_variable(). This patch
deals with the change to return the attribute in preparation for
adding code to update the variable.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-8-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add test cases for the cs_amp_read_cal_coeffs() and
cs_amp_write_ambient_temp() functions.
In both cases the test is simply to confirm that the correct data
value(s) get passed back to the caller.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-7-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Create debugfs files that can be used to perform factory calibration.
During manufacture, the production line must perform a factory calibration
of the amps. This commit adds this functionality via debugfs files.
As this is only needed during manufacture, there is no need for this to be
available in a normal system so a Kconfig item has been added to enable
this. The new Kconfig option is inside a sub-menu because items do not
group and indent if the parent is invisible or there are multiple parent
dependencies. Anyway the sub-menu reduces the clutter.
cs35l56_hda_apply_calibration() has been changed to return an error code
that can be reported back through the debugfs write. The original call to
this function doesn't check the return code because in normal use it
doesn't matter whether this fails - the firmware will default to a safe
calibration for the platform. But tooling using the debugfs files might
want to know if there was an error.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's nothing subarch dependent here, and it's odd
that includes need to be done in the subarch, and then
entries defined in the common file.
Simplify the whole thing from three files into one.
Link: https://patch.msgid.link/20251007071452.367989-4-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Create debugfs files that can be used to perform factory calibration.
During manufacture, the production line must perform a factory calibration
of the amps. This patch adds this functionality via debugfs files.
As this is only needed during manufacture, there is no need for this to be
available in a normal system so a Kconfig item has been added to enable
this. The new Kconfig option is inside a sub-menu because items do not
group and indent if the parent is invisible or there are multiple parent
dependencies. Anyway the sub-menu reduces the clutter.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HOSTFS_ATTR_* values were meant to be standalone for
communication between hostfs's kernel and user code parts.
However, it's easy to forget that HOSTFS_ATTR_* should be
used even on the kernel side, and that wasn't consistently
done. As a result, the values need to match ATTR_* values,
which is not useful to maintain by hand. Instead, generate
them via asm-offsets like other constants that UML needs
in user-side code that aren't otherwise available in any
header files that can be included there.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20251007071452.367989-3-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add core code to support factory calibration. This can be used by both
the ASoC and HDA drivers.
This code consists of implementations of debugfs handlers for three
debugfs files used to start factory calibration and read the results.
This is not a full implementation of debugfs files. There are some
requirements to synchronize with the rest of the amp driver, and the way
this is done is significantly different between ASoC and HDA. Therefore
cs35l56-shared.c provides the main part of the file handlers, but the
files themselves are defined in the ASoC and HDA drivers with suitable
handling before calling into this shared code.
The cal_data file allows the calibration to be read and also for a
previous calibration to be written (for systems where the storage is not
something directly accessible to drivers, such as on filesystems). Code
outside the kernel should treat the content of cal_data as an opaque blob,
so the struct definition is not exported as a user API.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add helper functions for performing factory calibration.
cs_amp_read_cal_coeffs() reads the results of a calibration into a
struct cirrus_amp_cal_data. The calTime member is also filled in with
the current time (which is defined to be in Windows format).
cs_amp_write_ambient_temp() writes a given temperature value to the
firmware control for ambient temperature.
The cs_amp_cal_target_u64() has been moved into the header file so
that it can be used by the calling code and by KUnit tests.
cs_amp_create_debugfs() creates a debugfs directory to contain
debugfs files related to calibration. This is placed in a directory
in debugfs root, named "cirrus_logic". The purpose of this is to
make it easier for tooling to find the files it needs by keeping
control of the layout under this directory. By contrast the ASoC
debugfs can vary between kernel releases and doesn't have a strictly
stable naming convention. HDA does not have a debugfs directory at all
and enabling the general ALSA debugfs (which is normally disabled) has
other side-effects.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Read the silicon ID from the amp during one-time cs35l56_hw_init()
and store it in struct cs35l56_base, instead of reading it from
registers every time it is needed.
Note that marking it non-volatile without a default in regmap isn't
a suitable alternative because this causes regcache_sync() to always
write the cached value out to the registers. This could trigger a bus
fault interrupt inside the amp, which we want to avoid.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is currently done in uml_finishsetup(), but e.g. with
KCOV enabled we'll crash because some init code can call
into e.g. memparse(), which has coverage annotations, and
then the checks in check_kcov_mode() crash because current
is NULL.
Simply initialize the cpu_tasks[] array statically, which
fixes the crash. For the later SMP work, it seems to have
not really caused any problems yet, but initialize all of
the entries anyway.
Link: https://patch.msgid.link/20250924113214.c76cd74d0583.I974f691ebb1a2b47915bd2b04cc38e5263b9447f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The PIPE clock is provided by the USB3 PHY, which is predictably not
connected to the HS-only controller. Add "qcom,select-utmi-as-pipe-clk"
quirk to HS only USB controller to disable pipe clock requirement.
Fixes: de1001525c ("arm64: dts: qcom: sa8775p: add USB nodes")
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20251024105019.2220832-3-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The PIPE clock is provided by the USB3 PHY, which is predictably not
connected to the HS-only controller. Add "qcom,select-utmi-as-pipe-clk"
quirk to HS only USB controller to disable pipe clock requirement.
Fixes: 4af46b7bd6 ("arm64: dts: qcom: x1e80100: Add USB nodes")
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20251024105019.2220832-2-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
With W=1, the following error comes up:
Warning (graph_child_address): /soc@0/usb@a2f8800/usb@a200000/ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary
This could be since the controller is only HS capable and only one port
node is added.
Fixes: 4af46b7bd6 ("arm64: dts: qcom: x1e80100: Add USB nodes")
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251019115630.2222720-1-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add supply_name entries for all PCA9450 regulators to describe their
respective input pin groups (INB13, INB26, INB45, INL1). This links each
buck and LDO to the upstream supply that powers its input group.
On some systems, power faults such as undervoltage are detected before
the PMIC itself. Defining supply relationships allows the regulator
framework to propagate such events properly through the dependency
chain.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20251027124415.989301-3-o.rempel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
On virtualized PowerPC (pseries) systems, where only one polling state
(Snooze) and one deep state (CEDE) are available, selecting CEDE when
the predicted idle duration is less than the target residency of CEDE
state can hurt performance. In such cases, the entry/exit overhead of
CEDE outweighs the power savings, leading to unnecessary state
transitions and higher latency.
Menu governor currently contains a special-case rule that prioritizes
the first non-polling state over polling, even when its target residency
is much longer than the predicted idle duration. On PowerPC/pseries,
where the gap between the polling state (Snooze) and the first non-polling
state (CEDE) is large, this behavior causes performance regressions.
Refine that special case by adding an extra requirement: the first
non-polling state can only be chosen if its target residency is below
the defined RESIDENCY_THRESHOLD_NS. If this condition is not satisfied,
polling is allowed instead, avoiding suboptimal non-polling state
entries.
This change is limited to the single special-case rule for the first
non-polling state. The general non-polling state selection logic in the
menu governor remains unchanged.
Performance improvement observed with pgbench on PowerPC (pseries)
system:
+---------------------------+------------+------------+------------+
| Metric | Baseline | Patched | Change (%) |
+---------------------------+------------+------------+------------+
| Transactions/sec (TPS) | 495,210 | 536,982 | +8.45% |
| Avg latency (ms) | 0.163 | 0.150 | -7.98% |
+---------------------------+------------+------------+------------+
CPUIdle state usage:
+--------------+--------------+-------------+
| Metric | Baseline | Patched |
+--------------+--------------+-------------+
| Total usage | 12,735,820 | 13,918,442 |
| Above usage | 11,401,520 | 1,598,210 |
| Below usage | 20,145 | 702,395 |
+--------------+--------------+-------------+
Above/Total and Below/Total usage percentages:
+------------------------+-----------+---------+
| Metric | Baseline | Patched |
+------------------------+-----------+---------+
| Above % (Above/Total) | 89.56% | 11.49% |
| Below % (Below/Total) | 0.16% | 5.05% |
| Total cpuidle miss (%) | 89.72% | 16.54% |
+------------------------+-----------+---------+
The results indicate that restricting CEDE selection to cases where
its residency matches the predicted idle time reduces mispredictions,
lowers unnecessary state transitions, and improves overall throughput.
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
[ rjw: Changelog edits, rebase ]
Link: https://patch.msgid.link/20251006013954.17972-1-aboorvad@linux.ibm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
gpiolib want to get completely rid of static gpiobase allocation, so
switch to dynamic allocate GPIO base in byte mode, also can avoid
warning message:
[1.529974] gpio gpiochip0: Static allocation of GPIO base is deprecated,
use dynamic allocation.
Reported-by: Hongliang Wang <wanghongliang@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251023090346.1995894-1-zhoubinbin@loongson.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
A throughput regression of 11% introduced by commit 779b1a1cb1 ("cpuidle:
governors: menu: Avoid selecting states with too much latency") has been
reported and it is related to the case when the menu governor checks if
selecting a proper idle state instead of a polling one makes sense.
In particular, it is questionable to do so if the exit latency of the
idle state in question exceeds the predicted idle duration, so add a
check for that, which is sufficient to make the reported regression go
away, and update the related code comment accordingly.
Fixes: 779b1a1cb1 ("cpuidle: governors: menu: Avoid selecting states with too much latency")
Closes: https://lore.kernel.org/linux-pm/004501dc43c9$ec8aa930$c59ffb90$@telus.net/
Reported-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/12786727.O9o76ZdvQC@rafael.j.wysocki
The calibrated timestamp is calculated from the nominal value using the
formula:
ts_gain[ns] ≈ ts_sensitivity - (ts_trim_coeff * val) / 1000.
The values of ts_sensitivity and ts_trim_coeff are not the same for all
devices, so it is necessary to differentiate them based on the part name.
For the correct values please consult the relevant AN.
Fixes: cb3b6b8e1b ("iio: imu: st_lsm6dsx: add odr calibration feature")
Signed-off-by: Mario Tesi <mario.tesi@st.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When probing the I2C master, disable SMBus interrupts to prevent
storms caused by broken firmware mis-configuring IC_SMBUS=1; the
handler never services them and a mis-configured SMBUS Master
extend-clock timeout or SMBUS Slave extend-clock timeout can
flood the CPU.
Signed-off-by: Jinhui Guo <guojinhui.liam@bytedance.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251021075714.3712-2-guojinhui.liam@bytedance.com
The i2c controller in the RK3506 is compatible to the variant first found
in the RK3399 SoC, so add the RK3506 to that variant list.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20251021222853.193224-1-heiko@sntech.de
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
An error code was assigned to a variable and checked accordingly.
This value was passed to a dev_err_probe() call in an if branch.
This function is documented in the way that the same value is returned.
Thus delete two redundant variable reassignments.
The source code was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/f7e0c023-d2d1-40ba-badb-74a7e9c23684@web.de
An error code was assigned to a variable and checked accordingly.
This value was passed to a dev_err_probe() call in an if branch.
This function is documented in the way that the same value is returned.
Thus delete a redundant variable reassignment.
The source code was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/bec52694-c755-4d88-aa36-1d96f6d146e4@web.de
Assign inside of 'if' conditional is not allowed. Move assignment from
inside 'if' conditional, to one line before each 'if'conditional statement
that caused errors.
Enforce errors fixing based on checkpatch.pl output on file.
Signed-off-by: Cezar Chiru <chiru.cezar.89@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251018091258.5266-3-chiru.cezar.89@gmail.com
Remove debug macros and printk and dev_dbg function calls from file
as no change was done for long time.
Remove i2c_debug module parameter also as its implementation, the debug
macros, has been removed.
Signed-off-by: Cezar Chiru <chiru.cezar.89@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251018091258.5266-2-chiru.cezar.89@gmail.com
When building certain configurations with CONFIG_FINEIBT=y after
commit 894af4a1cd ("objtool: Validate kCFI calls"), there is a
warning due to an indirect call in dw_i2c_plat_remove():
$ cat allno.config
CONFIG_ACPI=y
CONFIG_CFI=y
CONFIG_COMMON_CLK=y
CONFIG_CPU_MITIGATIONS=y
CONFIG_I2C=y
CONFIG_I2C_DESIGNWARE_BAYTRAIL=y
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_IOSF_MBI=y
CONFIG_MITIGATION_RETPOLINE=y
CONFIG_MODULES=y
CONFIG_PCI=y
CONFIG_X86_KERNEL_IBT=y
$ make -skj"$(nproc)" ARCH=x86_64 LLVM=1 clean allnoconfig vmlinux
vmlinux.o: warning: objtool: dw_i2c_plat_remove+0x3c: no-cfi indirect call!
With this configuration, i2c_dw_semaphore_cb_table has the BAYTRAIL
member and the sentinel (i.e., 2 members), both of which have an
implicit
.remove = NULL,
so Clang effectively turns i2c_dw_remove_lock_support(), which is later
inlined into dw_i2c_plat_remove(), into:
static void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev)
{
if (dev->semaphore_idx > 2)
(*NULL)(dev):
}
which is not necessarily problematic from a logic perspective (as the
code was not bounds checking semaphore_idx so an out of bounds index
could already crash) but objtool's new __nocfi indirect call checking
trips over Clang dropping the kCFI setup from a known NULL indirect
call.
While it would be possible to fix this by transforming the initial check
into
if (dev->semaphore_idx < 0 || dev->semaphore_idx >= ARRAY_SIZE(i2c_dw_semaphore_cb_table))
the remove member is unused after commit 440da737cf ("i2c: designware:
Use PCI PSP driver for communication"), so i2c_dw_remove_lock_support()
can be removed altogether, as it will never actually do anything.
Closes: https://github.com/ClangBuiltLinux/linux/issues/2133
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251013-dw_i2c_plat_remove-avoid-objtool-no-cfi-warning-v1-1-8cc4842967bf@kernel.org
a Clang build
- Make sure a Retbleed mitigation message is printed only when necessary
- Correct the last Zen1 microcode revision for which Entrysign sha256 check is
needed
- Fix a NULL ptr deref when mounting the resctrl fs on a system which supports
assignable counters but where L3 total and local bandwidth monitoring has
been disabled at boot
-----BEGIN PGP SIGNATURE-----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=EZGc
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.18_rc3' into x86/microcode
Pick up the below urgent upstream change in order to base more work
ontop:
- Correct the last Zen1 microcode revision for which Entrysign sha256 check is
needed
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Corrected various spelling mistakes and typos in multiple
files under the Xe directory. These fixes improve clarity
and maintain consistency in documentation.
v2
- Replaced all instances of "XE" with "Xe" where it referred
to the driver name
- of -> for
- Typical -> Typically
v3
- Revert "Xe" to "XE" for macro prefix reference
Signed-off-by: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20251023121453.1182035-2-sanjay.kumar.yadav@intel.com
nouveau_sched_fini() uses a memory barrier before wait_event().
wait_event(), however, is a macro which expands to a loop which might
check the passed condition several times. The barrier would only take
effect for the first check.
Replace the barrier with a function which takes the spinlock.
Cc: stable@vger.kernel.org # v6.8+
Fixes: 5f03a507b2 ("drm/nouveau: implement 1:1 scheduler - entity relationship")
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20251024161221.196155-2-phasta@kernel.org
The IOMMU core attaches each device to a default domain on probe(). Then,
every new "attach" operation has a fundamental meaning of two-fold:
- detach from its currently attached (old) domain
- attach to a given new domain
Modern IOMMU drivers following this pattern usually want to clean up the
things related to the old domain, so they call iommu_get_domain_for_dev()
to fetch the old domain.
Pass in the old domain pointer from the core to drivers, aligning with the
set_dev_pasid op that does so already.
Ensure all low-level attach fcuntions in the core can forward the correct
old domain pointer. Thus, rework those functions as well.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The last gdev is the device that failed the __iommu_device_set_domain().
So, it doesn't need to be reverted, given it's attached to group->domain
already.
This is not a problem currently, since it's a simply re-attach. However,
the core will need to pass in the old domain to __iommu_device_set_domain
so the old domain pointers would be inconsistent between a failed device
and all its prior succeeded devices, as all the prior devices need to be
reverted.
Avoid the re-attach for the last gdev, by breaking before the revert.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The set_dev_pasid for a release domain never gets called anyhow. So, there
is no point in defining a separate release_domain from the blocked_domain.
Simply reuse the blocked_domain.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
