Early boot stages may disable CPU DT nodes for unavailable
CPUs based on SKU, pinstraps, eFuse, etc. Currently, the
riscv_early_of_processor_hartid() prints details of a CPU
if it is disabled in DT which has no value and gives a
false impression to the users that there some issue with
the CPU.
Fixes: e3d794d555 ("riscv: treat cpu devicetree nodes without status as enabled")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20251014163009.182381-1-apatel@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
This definition is used by zsmalloc to optimize memory allocation. On
riscv64, it is the same as MAX_PHYSMEM_BITS from asm/sparsemem.h, but
that definition depends on CONFIG_SPARSEMEM. The correct definition is
already provided for riscv32.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20251015233327.3885003-1-samuel.holland@sifive.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
TASCAM FW-1884/FW-1804/FW-1082 have a quirk that they often freeze when
receiving isochronous packets at S400. This behaviour is suppressed by a
new quirk flag added in Linux FireWire core to restrict maximum speed.
Consequently both of the asynchronous transactions and isochronous
transmissions are done at S200. However, the device still transfers
isochronous packet at S400, and the way to indicate the transmission
speed is not cleared yet.
This commit correctly reserves isochronous resources for the transferred
packet stream at S400. As a beneficial side effect, the pair of
isochronous transmissions for FW-1884 fits within the bandwidth capacity
of the bus.
Link: https://lore.kernel.org/r/20251018035532.287124-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
TASCAM FW-1884/FW-1804/FW-1082 is too lazy to repspond to asynchronous
request at S400. The asynchronous transaction often results in timeout.
This is a problematic quirk.
This commit adds support for the quirk. When identifying the new quirk
flag, then the transaction speed is configured at S200.
Link: https://lore.kernel.org/r/20251018035532.287124-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Current implementation determines the maximum transaction speed supported
by the target device after reading bus information block of configuration
ROM. The read operations for root directory block are then performed at
the determined speed. However, some devices have quirks that cause issues
when transactions are performed at the determined speed.
In the first place, all devices are required to support the lowest speed
(S100) and must respond successfully to any read request within the
configuration ROM space. Therefore it is safe to postpone speed
determination until the entire configuration ROM has been read.
This commit moves the speed determination after reading root directory.
Link: https://lore.kernel.org/r/20251018035532.287124-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The pgprot_dmacoherent() is used when allocating memory for
non-coherent devices and by default pgprot_dmacoherent() is
same as pgprot_noncached() unless architecture overrides it.
Currently, there is no pgprot_dmacoherent() definition for
RISC-V hence non-coherent device memory is being mapped as
IO thereby making CPU access to such memory slow.
Define pgprot_dmacoherent() to be same as pgprot_writecombine()
for RISC-V so that CPU access non-coherent device memory as
NOCACHE which is better than accessing it as IO.
Fixes: ff689fd21c ("riscv: add RISC-V Svpbmt extension support")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Han Gao <rabenda.cn@gmail.com>
Tested-by: Guo Ren (Alibaba DAMO Academy) <guoren@kernel.org>
Link: https://lore.kernel.org/r/20250820152316.1012757-1-apatel@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Provide the basic platform definitions and PCI IDs for NVL-S.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251016-xe3p-v3-11-3dd173a3097a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Currently the guardband is optimized only for platforms where the
VRR timing generator is always ON.
Extend the usage of optimized guardband to all VRR supporting platforms.
v2: Drop check for `crtc_state->vrr.enable` and just return true
unconditionally from intel_vrr_use_optimized_guardband(). (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20251017123504.2247954-6-ankit.k.nautiyal@intel.com
In the current VRR implementation, vrr.vmin and vrr.guardband are set such
that they do not need to change when switching from fixed refresh rate to
variable refresh rate. Specifically, vrr.guardband is always set to match
the vblank length. This approach works for most cases, but not for LRR,
where the guardband would need to change while the VRR timing generator is
still active.
With the VRR TG always active, live updates to guardband are unsafe and not
recommended. To ensure hardware safety, guardband was moved out of the
!fastset block, meaning any change now requires a full modeset.
This breaks seamless LRR switching, which was previously supported.
Since the problem arises from guardband being matched to the vblank length,
solution is to use a minimal, sufficient static value, instead. So we use a
static guardband defined during mode-set that fits within the smallest
expected vblank and remains unchanged in case of features like LRR where
vtotal changes. To compute this minimum guardband we take into account
latencies/delays due to different features as mentioned in the Bspec.
Introduce a helper to compute the minimal sufficient guardband.
On platforms where the VRR timing generator is always ON, we optimize the
guardband regardless of whether the display is operating in fixed or
variable refresh rate mode.
v2:
- Use max of sagv latency and skl_wm_latency(1) for PM delay
computation. (Ville)
- Avoid guardband optimization for HDMI for now. (Ville)
- Allow guardband optimization only for platforms with
intel_vrr_always_use_vrr_tg = true. (Ville)
- Add comments for PM delay and a #TODO note for HDMI.
v3: Drop the variable prefill_min_guardband. (Ville)
Bspec: 70151
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20251017123504.2247954-5-ankit.k.nautiyal@intel.com
Add a helper to compute vblank time needed for transmitting specific
DisplayPort SDPs like PPS, GAMUT_METADATA, and VSC_EXT. Latency is
based on line count per packet type.
This will be used to ensure adequate guardband when features like DSC/HDR
are enabled.
v2: Correct the lines required for PPS SDP. (Jouni)
Bspec: 70151
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20251017123504.2247954-3-ankit.k.nautiyal@intel.com
Introduce a helper to compute the max link wake latency when using
Auxless/Aux wake mechanism for PSR/Panel Replay/LOBF features.
This will be used to compute the minimum guardband so that the link wake
latencies are accounted and these features work smoothly for higher
refresh rate panels.
v2:
- Account for flag `req_psr2_sdp_prior_scanline` and scl lines while
computing min guardband. (Jouni)
- Use wake lines only for eDP with panel_replay and sel_update flags
set. (Jouni)
Bspec: 70151, 71477
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20251017123504.2247954-2-ankit.k.nautiyal@intel.com
In the pegasus_notetaker driver, the pegasus_probe() function allocates
the URB transfer buffer using the wMaxPacketSize value from
the endpoint descriptor. An attacker can use a malicious USB descriptor
to force the allocation of a very small buffer.
Subsequently, if the device sends an interrupt packet with a specific
pattern (e.g., where the first byte is 0x80 or 0x42),
the pegasus_parse_packet() function parses the packet without checking
the allocated buffer size. This leads to an out-of-bounds memory access.
Fixes: 1afca2b66a ("Input: add Pegasus Notetaker tablet driver")
Signed-off-by: Seungjin Bae <eeodqql09@gmail.com>
Link: https://lore.kernel.org/r/20251007214131.3737115-2-eeodqql09@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Daniel Golle says:
====================
net: dsa: lantiq_gswip: clean up and improve VLAN handling
This series was developed by Vladimir Oltean to improve and clean up the
VLAN handling logic in the Lantiq GSWIP DSA driver.
As Vladimir currently doesn't have the availability to take care of the
submission process, we agreed that I would send the patches on his
behalf.
The series focuses on consolidating the VLAN management paths for both
VLAN-unaware and VLAN-aware bridges, simplifying internal logic, and
removing legacy or redundant code. It also fixes a number of subtle
inconsistencies regarding VLAN ID 0 handling, bridge FDB entries, and
brings the driver into shape to permit dynamic changes to the VLAN
filtering state.
Notable changes include:
- Support for bridge FDB entries on the CPU port
- Consolidation of gswip_vlan_add_unaware() and gswip_vlan_add_aware()
into a unified implementation
- Removal of legacy VLAN configuration options and redundant
assignments
- Improved handling of VLAN ID 0 and PVID behavior
- Better validation and error reporting in VLAN removal paths
- Support for dynamic VLAN filtering configuration changes
Overall, this refactor improves readability and maintainability of the
Lantiq GSWIP DSA driver. It also results in all local-termination.sh
tests now passing, and slightly improves the results of
bridge-vlan-{un,}aware.sh.
All patches have been authored by Vladimir Oltean; a small unintended
functional change in patch "net: dsa: lantiq_gswip: merge
gswip_vlan_add_unaware() and gswip_vlan_add_aware()" has been ironed out
and some of the commit descriptions were improved by me, apart from that
I'm only handling the submission and will help with follow-up
discussions or review feedback as needed.
Despite the fact that some changes here do actually fix things (in the
sense that selftests which would previously FAIL now PASS) we decided
that it would be the best for this series of patches to go via net-next.
If requested some of it can still be ported to stable kernels later on.
====================
Link: https://patch.msgid.link/cover.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Documentation/networking/switchdev.rst says that VLAN-aware bridges must
treat packets tagged with VID 0 the same as untagged. It appears from
the documentation that setting the GSWIP_PCE_VCTRL_VID0 flag (which this
driver already had defined) might achieve this.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/b220ac149922839a261b754202c05df5bb253c98.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the required functionality, as written in
Documentation/networking/switchdev.rst section "Bridge VLAN filtering",
by using the "VLAN Ingress Tag Rule" feature of the switch.
The bit field definitions for this were found while browsing the Intel
dual BSD/GPLv2 licensed drivers for this switch IP.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/787aa807d00b726d75db2a40add215c8b8ba7466.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
"bool pvid" is unused since commit "net: dsa: lantiq_gswip: remove
legacy configure_vlan_while_not_filtering option".
"bool vlan_aware" shouldn't have a role in finding the bridge VLAN.
It should be identified by VID regardless of VLAN-aware or VLAN-unaware.
The driver sets up VID 0 for the VLAN-unaware PVID.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/c63f89ca19269ef6c8bf00a62cacc739164b4441.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
User space can force the altering of VID 0 as it was privately set up by
this driver.
For example, when the port joins a VLAN-aware bridge,
dsa_user_manage_vlan_filtering() will set NETIF_F_HW_VLAN_CTAG_FILTER.
If the port is subsequently brought up and CONFIG_VLAN_8021Q is enabled,
the vlan_vid0_add() function will want to make sure we are capable of
accepting packets tagged with VID 0.
Generally, DSA/switchdev drivers want to suppress that bit of help from
the 8021q layer, and handle VID 0 filters themselves. The 8021q layer
might actually be even detrimential, because VLANs added through
vlan_vid_add() pass through dsa_user_vlan_rx_add_vid(), which is
documented as this:
/* This API only allows programming tagged, non-PVID VIDs */
.flags = 0,
so it will force VID 0 to be reconfigured as egress-tagged, non-PVID.
Whereas the driver configures it as PVID and egress-untagged, the exact
opposite.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/9f68340c34b5312c3b8c6c7ecf3cfce574a3f65d.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver should now tolerate these changes, now that the PVID is
automatically recalculated on a VLAN awareness state change.
The VLAN-unaware PVID must be installed to hardware even if the
joined bridge is currently VLAN-aware. Otherwise, when the bridge VLAN
filtering state dynamically changes to VLAN-unaware later, this PVID
will be missing.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/c58759074fb699581336dc2c2c6bf106257b134e.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This driver doesn't support dynamic VLAN filtering changes, for simplicity.
It expects that on a port, either gswip_vlan_add_unaware() or
gswip_vlan_add_aware() is called, but not both.
When !br_vlan_enabled(), the configure_vlan_while_not_filtering = false
option is exactly what will prevent calls to gswip_port_vlan_add() from
being issued by DSA.
In fact, at the time these features were submitted:
https://patchwork.ozlabs.org/project/netdev/patch/20190501204506.21579-3-hauke@hauke-m.de/
"configure_vlan_while_not_filtering = false" did not even have a name,
it was implicit behaviour. It only became legacy in commit 54a0ed0df4
("net: dsa: provide an option for drivers to always receive bridge
VLANs").
Section "Bridge VLAN filtering" of Documentation/networking/switchdev.rst
describes the exact set of rules. Notably, the PVID of the port must
follow the VLAN awareness state of the bridge port. A VLAN-unaware
bridge port should not respond to the addition of a bridge VLAN with the
PVID flag. In fact, the pvid_change() test in
tools/testing/selftests/net/forwarding/bridge_vlan_unaware.sh tests
exactly this.
The lantiq_gswip driver indeed does not respond to the addition of PVID
VLANs while VLAN-unaware in the way described above, but only because of
configure_vlan_while_not_filtering. Our purpose here is to get rid of
configure_vlan_while_not_filtering, so we must add more complex logic
which follows the VLAN awareness state and walks through the Active VLAN
table entries, to find the index of the PVID register that should be
committed to hardware on each port.
As a side-effect of now having a proper implementation to assign the
PVID all the "VLAN upper: ..." tests of the local_termination.sh self-
tests which would previously all FAIL now all PASS (or XFAIL, but
that's ok).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/47dab8a8b69ebb92624b9795b723114475d3fe4e.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The two functions largely duplicate functionality. The differences
consist in:
- the "fid" passed to gswip_vlan_active_create(). The unaware variant
always passes -1, the aware variant passes fid = priv->vlans[i].fid,
where i is an index into priv->vlans[] for which priv->vlans[i].bridge
is equal to the given bridge.
- the "vid" is not passed to gswip_vlan_add_unaware(). It is implicitly
GSWIP_VLAN_UNAWARE_PVID (zero).
- The "untagged" is not passed to gswip_vlan_add_unaware(). It is
implicitly true. Also, the CPU port must not be a tag member of the
PVID used for VLAN-unaware bridging.
- The "pvid" is not passed to gswip_vlan_add_unaware(). It is implicitly
true.
- The GSWIP_PCE_DEFPVID(port) register is written by the aware variant
with an "idx", but with a hardcoded 0 by the unaware variant.
Merge the two functions into a single unified function without any
functional changes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/2be190701d4c17038ce4b8047f9fb0bdf8abdf6e.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When idx == -1 in gswip_vlan_add(), we set vlan_mapping.val[0] = vid,
even though we do the exact same thing again outside the if/else block.
Remove the duplicate assignment.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/039ecb48e038cea856a9a6230ad1543db2bc382d.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the driver takes the bridge from dsa_port_bridge_dev_get(),
which only works for user ports. This is why it has to ignore FDB
entries installed on the CPU port.
Commit c26933639b ("net: dsa: request drivers to perform FDB
isolation") introduced the possibility of getting the originating bridge
from the passed dsa_db argument, so let's do that instead. This way, we
can act on the local FDB entries coming from the bridge.
Note that we do not expect FDB events for the DSA_DB_PORT database,
because this driver doesn't fulfill the dsa_switch_supports_uc_filtering()
requirements. So we can just return -EOPNOTSUPP and expect it will never
be triggered.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/ed9d847c0356f0fec81422bdad9ebdcc6a59da79.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCaPFVxwAKCRAraS+Z+3y5
E1yDAP98nxKLBFb9auLj8AV1zUNl4lKEpOIhH7ceXaDT7ucsagEAwvSbGAN5sun/
M0+sOpKEZwF8JBoRU8L61uYPYSu7XAk=
=2K9O
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-10-16
We've added 6 non-merge commits during the last 1 day(s) which contain
a total of 18 files changed, 577 insertions(+), 38 deletions(-).
The main changes are:
1) Bypass the global per-protocol memory accounting either by setting
a netns sysctl or using bpf_setsockopt in a bpf program,
from Kuniyuki Iwashima.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Add test for sk->sk_bypass_prot_mem.
bpf: Introduce SK_BPF_BYPASS_PROT_MEM.
bpf: Support bpf_setsockopt() for BPF_CGROUP_INET_SOCK_CREATE.
net: Introduce net.core.bypass_prot_mem sysctl.
net: Allow opt-out from global protocol memory accounting.
tcp: Save lock_sock() for memcg in inet_csk_accept().
====================
Link: https://patch.msgid.link/20251016204539.773707-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make tcp-md5 use the MD5 library API (added in 6.18) instead of the
crypto_ahash API. This is much simpler and also more efficient:
- The library API just operates on struct md5_ctx. Just allocate this
struct on the stack instead of using a pool of pre-allocated
crypto_ahash and ahash_request objects.
- The library API accepts standard pointers and doesn't require
scatterlists. So, for hashing the headers just use an on-stack buffer
instead of a pool of pre-allocated kmalloc'ed scratch buffers.
- The library API never fails. Therefore, checking for MD5 hashing
errors is no longer necessary. Update tcp_v4_md5_hash_skb(),
tcp_v6_md5_hash_skb(), tcp_v4_md5_hash_hdr(), tcp_v6_md5_hash_hdr(),
tcp_md5_hash_key(), tcp_sock_af_ops::calc_md5_hash, and
tcp_request_sock_ops::calc_md5_hash to return void instead of int.
- The library API provides direct access to the MD5 code, eliminating
unnecessary overhead such as indirect function calls and scatterlist
management. Microbenchmarks of tcp_v4_md5_hash_skb() on x86_64 show a
speedup from 7518 to 7041 cycles (6% fewer) with skb->len == 1440, or
from 1020 to 678 cycles (33% fewer) with skb->len == 140.
Since tcp_sigpool_hash_skb_data() can no longer be used, add a function
tcp_md5_hash_skb_data() which is specialized to MD5. Of course, to the
extent that this duplicates any code, it's well worth it.
To preserve the existing behavior of TCP-MD5 support being disabled when
the kernel is booted with "fips=1", make tcp_md5_do_add() check
fips_enabled itself. Previously it relied on the error from
crypto_alloc_ahash("md5") being bubbled up. I don't know for sure that
this is actually needed, but this preserves the existing behavior.
Tested with bidirectional TCP-MD5, both IPv4 and IPv6, between a kernel
that includes this commit and a kernel that doesn't include this commit.
(Side note: please don't use TCP-MD5! It's cryptographically weak. But
as long as Linux supports it, it might as well be implemented properly.)
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20251014215836.115616-1-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The io_uring functions return negative error values, but error() expects
these to be positive to properly match them to an errno string. Fix this
to make sure the correct error descriptions are displayed upon failure.
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20251016182538.3790567-1-cmllamas@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's a good chance that more chip versions suffer from the same
hw issue. So let's reconfigure rx unconditionally before the chip reset
when resuming. This shouldn't have any side effect on unaffected chip
versions.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/a5c2e2d2-226f-4896-b8f6-45e2d91f0e24@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When splitting the RTL8221B-VM-CG into C22 and C45 variants, the name was
accidentally changed to RTL8221B-VN-CG. This patch brings back the previous
part number.
Fixes: ad5ce743a6 ("net: phy: realtek: Add driver instances for rtl8221b via Clause 45")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251016192325.2306757-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The blamed commit increased the needed headroom to account for
alignment. This means that the size required to always align a Tx buffer
was added inside the dpaa2_eth_needed_headroom() function. By doing
that, a manual adjustment of the pointer passed to PTR_ALIGN() was no
longer correct since the 'buffer_start' variable was already pointing
to the start of the skb's memory.
The behavior of the dpaa2-eth driver without this patch was to drop
frames on Tx even when the headroom was matching the 128 bytes
necessary. Fix this by removing the manual adjust of 'buffer_start' from
the PTR_MODE call.
Closes: https://lore.kernel.org/netdev/70f0dcd9-1906-4d13-82df-7bbbbe7194c6@app.fastmail.com/T/#u
Fixes: f422abe3f2 ("dpaa2-eth: increase the needed headroom to account for alignment")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251016135807.360978-1-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch fixes ce7a381697 ("net: bonding: add broadcast_neighbor option for 802.3ad").
Before this commit, on the broadcast mode, all devices were traversed using the
bond_for_each_slave_rcu. This patch supports traversing devices by using all_slaves.
Therefore, we need to update the slave array when enslave or release slave.
Fixes: ce7a381697 ("net: bonding: add broadcast_neighbor option for 802.3ad")
Cc: Simon Horman <horms@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: <stable@vger.kernel.org>
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Tested-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/all/a97e6e1e-81bc-4a79-8352-9e4794b0d2ca@kernel.org/
Signed-off-by: Tonghao Zhang <tonghao@bamaicloud.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20251016125136.16568-1-tonghao@bamaicloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Quoting Eric Dumazet:
"I do not understand the fascination with net/core/drop_monitor.c [..]
misses all the features, flexibility, scalability that 'perf',
eBPF tracing, bpftrace, .... have today."
Reword DROP_MONITOR kconfig help text to clearly state that its not
related to perf-based drop monitoring and that its safe to disable
this unless support for the older netlink-based tools is needed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251016115147.18503-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cloud-ifupdown-helper patch and reattach-vf.sh script are rendered in
htmldocs output as normal paragraphs instead of literal code blocks
due to missing separator from respective code block marker. Add it.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251016093936.29442-2-bagasdotme@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ENETC RX ring uses the page halves flipping mechanism, each page is
split into two halves for the RX ring to use. And ENETC_RXB_TRUESIZE is
defined to 2048 to indicate the size of half a page. However, the page
size is configurable, for ARM64 platform, PAGE_SIZE is default to 4K,
but it could be configured to 16K or 64K.
When PAGE_SIZE is set to 16K or 64K, ENETC_RXB_TRUESIZE is not correct,
and the RX ring will always use the first half of the page. This is not
consistent with the description in the relevant kernel doc and commit
messages.
This issue is invisible in most cases, but if users want to increase
PAGE_SIZE to receive a Jumbo frame with a single buffer for some use
cases, it will not work as expected, because the buffer size of each
RX BD is fixed to 2048 bytes.
Based on the above two points, we expect to correct ENETC_RXB_TRUESIZE
to (PAGE_SIZE >> 1), as described in the comment.
Fixes: d4fd0404c1 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20251016080131.3127122-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After applying the workaround for err050089, the LS1028A platform
experiences RCU stalls on RT kernel. This issue is caused by the
recursive acquisition of the read lock enetc_mdio_lock. Here list some
of the call stacks identified under the enetc_poll path that may lead to
a deadlock:
enetc_poll
-> enetc_lock_mdio
-> enetc_clean_rx_ring OR napi_complete_done
-> napi_gro_receive
-> enetc_start_xmit
-> enetc_lock_mdio
-> enetc_map_tx_buffs
-> enetc_unlock_mdio
-> enetc_unlock_mdio
After enetc_poll acquires the read lock, a higher-priority writer attempts
to acquire the lock, causing preemption. The writer detects that a
read lock is already held and is scheduled out. However, readers under
enetc_poll cannot acquire the read lock again because a writer is already
waiting, leading to a thread hang.
Currently, the deadlock is avoided by adjusting enetc_lock_mdio to prevent
recursive lock acquisition.
Fixes: 6d36ecdbc4 ("net: enetc: take the MDIO lock only once per NAPI poll cycle")
Signed-off-by: Jianpeng Chang <jianpeng.chang.cn@windriver.com>
Acked-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20251015021427.180757-1-jianpeng.chang.cn@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xuanqiang Luo says:
====================
net: Avoid ehash lookup races
After replacing R/W locks with RCU in commit 3ab5aee7fe ("net: Convert
TCP & DCCP hash tables to use RCU / hlist_nulls"), a race window emerged
during the switch from reqsk/sk to sk/tw.
Now that both timewait sock (tw) and full sock (sk) reside on the same
ehash chain, it is appropriate to introduce hlist_nulls replace
operations, to eliminate the race conditions caused by this window.
Before this series of patches, I previously sent another version of the
patch, attempting to avoid the issue using a lock mechanism. However, it
seems there are some problems with that approach now, so I've switched to
the "replace" method in the current patches to resolve the issue.
For details, refer to:
https://lore.kernel.org/netdev/20250903024406.2418362-1-xuanqiang.luo@linux.dev/
Before I encountered this type of issue recently, I found there had been
several historical discussions about it. Therefore, I'm adding this
background information for those interested to reference:
1. https://lore.kernel.org/lkml/20230118015941.1313-1-kerneljasonxing@gmail.com/
2. https://lore.kernel.org/netdev/20230606064306.9192-1-duanmuquan@baidu.com/
====================
Link: https://patch.msgid.link/20251015020236.431822-1-xuanqiang.luo@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since ehash lookups are lockless, if another CPU is converting sk to tw
concurrently, fetching the newly inserted tw with tw->tw_refcnt == 0 cause
lookup failure.
The call trace map is drawn as follows:
CPU 0 CPU 1
----- -----
inet_twsk_hashdance_schedule()
spin_lock()
inet_twsk_add_node_rcu(tw, ...)
__inet_lookup_established()
(find tw, failure due to tw_refcnt = 0)
__sk_nulls_del_node_init_rcu(sk)
refcount_set(&tw->tw_refcnt, 3)
spin_unlock()
By replacing sk with tw atomically via hlist_nulls_replace_init_rcu() after
setting tw_refcnt, we ensure that tw is either fully initialized or not
visible to other CPUs, eliminating the race.
It's worth noting that we held lock_sock() before the replacement, so
there's no need to check if sk is hashed. Thanks to Kuniyuki Iwashima!
Fixes: 3ab5aee7fe ("net: Convert TCP & DCCP hash tables to use RCU / hlist_nulls")
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251015020236.431822-4-xuanqiang.luo@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since ehash lookups are lockless, if one CPU performs a lookup while
another concurrently deletes and inserts (removing reqsk and inserting sk),
the lookup may fail to find the socket, an RST may be sent.
The call trace map is drawn as follows:
CPU 0 CPU 1
----- -----
inet_ehash_insert()
spin_lock()
sk_nulls_del_node_init_rcu(osk)
__inet_lookup_established()
(lookup failed)
__sk_nulls_add_node_rcu(sk, list)
spin_unlock()
As both deletion and insertion operate on the same ehash chain, this patch
introduces a new sk_nulls_replace_node_init_rcu() helper functions to
implement atomic replacement.
Fixes: 5e0724d027 ("tcp/dccp: fix hashdance race for passive sessions")
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251015020236.431822-3-xuanqiang.luo@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add two functions to atomically replace RCU-protected hlist_nulls entries.
Keep using WRITE_ONCE() to assign values to ->next and ->pprev, as
mentioned in the patch below:
commit efd04f8a8b ("rcu: Use WRITE_ONCE() for assignments to ->next for
rculist_nulls")
commit 860c8802ac ("rcu: Use WRITE_ONCE() for assignments to ->pprev for
hlist_nulls")
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Link: https://patch.msgid.link/20251015020236.431822-2-xuanqiang.luo@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In {tcp6,udp6,raw6}_sock, struct ipv6_pinfo is always placed at
the beginning of a new cache line because
1. __alignof__(struct tcp_sock) is 64 due to ____cacheline_aligned
of __cacheline_group_begin(tcp_sock_write_tx)
2. __alignof__(struct udp_sock) is 64 due to ____cacheline_aligned
of struct numa_drop_counters
3. in raw6_sock, struct numa_drop_counters is placed before
struct ipv6_pinfo
. struct ipv6_pinfo is 136 bytes, but the last cache line is
only used by ipv6_fl_list:
$ pahole -C ipv6_pinfo vmlinux
struct ipv6_pinfo {
...
/* --- cacheline 2 boundary (128 bytes) --- */
struct ipv6_fl_socklist * ipv6_fl_list; /* 128 8 */
/* size: 136, cachelines: 3, members: 23 */
Let's move ipv6_fl_list from struct ipv6_pinfo to struct inet_sock
to save a full cache line for {tcp6,udp6,raw6}_sock.
Now, struct ipv6_pinfo is 128 bytes, and {tcp6,udp6,raw6}_sock have
64 bytes less, while {tcp,udp,raw}_sock retain the same size.
Before:
# grep -E "^(RAW|UDP[^L\-]|TCP)" /proc/slabinfo | awk '{print $1, "\t", $4}'
RAWv6 1408
UDPv6 1472
TCPv6 2560
RAW 1152
UDP 1280
TCP 2368
After:
# grep -E "^(RAW|UDP[^L\-]|TCP)" /proc/slabinfo | awk '{print $1, "\t", $4}'
RAWv6 1344
UDPv6 1408
TCPv6 2496
RAW 1152
UDP 1280
TCP 2368
Also, ipv6_fl_list and inet_flags (SNDFLOW bit) are placed in the
same cache line.
$ pahole -C inet_sock vmlinux
...
/* --- cacheline 11 boundary (704 bytes) was 56 bytes ago --- */
struct ipv6_pinfo * pinet6; /* 760 8 */
/* --- cacheline 12 boundary (768 bytes) --- */
struct ipv6_fl_socklist * ipv6_fl_list; /* 768 8 */
unsigned long inet_flags; /* 776 8 */
Doc churn is due to the insufficient Type column (only 1 space short).
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251014224210.2964778-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Explicitly encode the XZR register if the value passed to
write_sysreg_s() is 0. The GIC CDEOI instruction is encoded as a
system register write with XZR as the source register. However, clang
does not honour the "Z" register constraint, leading to incorrect
code generation
- Ensure the interrupts (DAIF.IF) are unmasked when completing
single-step of a suspended breakpoint before calling
exit_to_user_mode(). With pseudo-NMIs, interrupts are (additionally)
masked at the PMR_EL1 register, handled by local_irq_*()
-----BEGIN PGP SIGNATURE-----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=Dn7A
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Explicitly encode the XZR register if the value passed to
write_sysreg_s() is 0.
The GIC CDEOI instruction is encoded as a system register write with
XZR as the source register. However, clang does not honour the "Z"
register constraint, leading to incorrect code generation
- Ensure the interrupts (DAIF.IF) are unmasked when completing
single-step of a suspended breakpoint before calling
exit_to_user_mode().
With pseudo-NMIs, interrupts are (additionally) masked at the PMR_EL1
register, handled by local_irq_*()
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: debug: always unmask interrupts in el0_softstp()
arm64/sysreg: Fix GIC CDEOI instruction encoding
Some RISC-V fixes for v6.18-rc2, including changes to:
- Disable CFI with Rust for any platform other than x86 and ARM64
- Keep task mm_cpumasks up-to-date to avoid triggering M-mode firmware
warnings if the kernel tries to send an IPI to an offline CPU
- Improve kprobe address validation performance and avoid desyncs
(following x86)
- Avoid duplicate device probes by avoiding DT hardware probing when
ACPI is enabled in early boot
- Use the correct set of dependencies for CONFIG_ARCH_HAS_ELF_CORE_EFLAGS,
avoiding an allnoconfig warning
- Fix a few other minor issues
-----BEGIN PGP SIGNATURE-----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=ZOFG
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linux-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Disable CFI with Rust for any platform other than x86 and ARM64
- Keep task mm_cpumasks up-to-date to avoid triggering M-mode firmware
warnings if the kernel tries to send an IPI to an offline CPU
- Improve kprobe address validation performance and avoid desyncs
(following x86)
- Avoid duplicate device probes by avoiding DT hardware probing when
ACPI is enabled in early boot
- Use the correct set of dependencies for
CONFIG_ARCH_HAS_ELF_CORE_EFLAGS, avoiding an allnoconfig warning
- Fix a few other minor issues
* tag 'riscv-for-linux-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: kprobes: convert one final __ASSEMBLY__ to __ASSEMBLER__
riscv: Respect dependencies of ARCH_HAS_ELF_CORE_EFLAGS
riscv: acpi: avoid errors caused by probing DT devices when ACPI is used
riscv: kprobes: Fix probe address validation
riscv: entry: fix typo in comment 'instruciton' -> 'instruction'
RISC-V: clear hot-unplugged cores from all task mm_cpumasks to avoid rfence errors
riscv: kgdb: Ensure that BUFMAX > NUMREGBYTES
rust: cfi: only 64-bit arm and x86 support CFI_CLANG
The zap shader was previously loaded from "qcom/a530_zap.mdt", which is a
symlink to "qcom/apq8096/a530_zap.mbn". Update the DTS to reference the
actual firmware file in linux-firmware directly.
This avoids relying on the symlink and ensures a more robust firmware load
path.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251014084808.112097-1-valentine.burley@collabora.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
