Things that need to be fixed before final release, a refcount error and
some missing or incorrect error checks.
-----BEGIN PGP SIGNATURE-----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=eHUv
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.18-2' of https://github.com/cminyard/linux-ipmi
Pull IPMI fixes from Corey Minyard:
"A few bug fixes for patches that went in this release: a refcount
error and some missing or incorrect error checks"
* tag 'for-linus-6.18-2' of https://github.com/cminyard/linux-ipmi:
ipmi: Fix handling of messages with provided receive message pointer
mfd: ls2kbmc: check for devm_mfd_add_devices() failure
mfd: ls2kbmc: Fix an IS_ERR() vs NULL check in probe()
Enable proper pin multiplexing for the I2S1 8-channel transmit interface by
adding the default pinctrl configuration which esures correct signal routing
and avoids pinmux conflicts during audio playback.
Changes fix the error
[ 116.856643] [ T782] rockchip-pinctrl pinctrl: pin gpio1-10 already requested by affinity_hint; cannot claim for fe410000.i2s
[ 116.857567] [ T782] rockchip-pinctrl pinctrl: error -EINVAL: pin-42 (fe410000.i2s)
[ 116.857618] [ T782] rockchip-pinctrl pinctrl: error -EINVAL: could not request pin 42 (gpio1-10) from group i2s1m0-sdi1 on device rockchip-pinctrl
[ 116.857659] [ T782] rockchip-i2s-tdm fe410000.i2s: Error applying setting, reverse things back
I2S1 on the M1 to the codec in the RK809 only uses the SCLK, LRCK, SDI0
and SDO0 signals, so limit the claimed pins to those.
With this change audio output works as expected:
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDMI], device 0: fe400000.i2s-i2s-hifi i2s-hifi-0 [fe400000.i2s-i2s-hifi i2s-hifi-0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: RK817 [Analog RK817], device 0: fe410000.i2s-rk817-hifi rk817-hifi-0 [fe410000.i2s-rk817-hifi rk817-hifi-0]
Subdevices: 1/1
Subdevice #0: subdevice #0
Fixes: 78f858447c ("arm64: dts: rockchip: Add analog audio on ODROID-M1")
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
[adapted the commit message a bit]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Division is an expensive operation. Overflow check functions exist
already. Use existing overflow check functions rather than dividing to
check for overflow.
Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251007174218.469867-1-youssef.abdulrahman@oss.qualcomm.com
The sc_c field is currently not updated in the host response to the
controller challenge leading to failures while attempting secure
channel concatenation. Fix this by adding a new sc_c variable to the
dhchap queue context structure which is appropriately set during
negotiate and then used in the host response.
Fixes: e88a7595b5 ("nvme-tcp: request secure channel concatenation")
Signed-off-by: Martin George <marting@netapp.com>
Signed-off-by: Prashanth Adurthi <prashana@netapp.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Add the Designware MIPI DSI controller and it's port nodes.
Signed-off-by: WeiHao Li <cn.liweihao@gmail.com>
[removed endpoint address, as there is only one vop leading to DSI]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
RK3368 has a InnoSilicon D-PHY which supports DSI/LVDS/TTL with maximum
trasnfer rate of 1 Gbps per lane.
Signed-off-by: WeiHao Li <cn.liweihao@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Found via code inspection that when encode_message() fails in the middle
of processing, instead of returning the actual error code, it always
returns -EINVAL. This is because the entire message length has not been
processed, and the error code is set to -EINVAL.
Instead, take the 'out' path on failure to return the actual error code.
Signed-off-by: Aswin Venkatesan <aswivenk@qti.qualcomm.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251007170130.445878-1-youssef.abdulrahman@oss.qualcomm.com
Replace manual rproc_add() and cleanup logic with devm_rproc_add(), which
ties the remoteproc lifecycle to the device's lifecycle. This simplifies
error handling and ensures proper cleanup.
With no need to invoke rproc_del(), the remove() ops could be removed.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250926-imx_rproc_v3-v3-6-4c0ec279cc5f@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The big picture section of 2.Process.rst currently hardcodes major
version number to 5 since fb0e0ffe7f ("Documentation: bring process
docs up to date"). As it can get outdated when it is actually
incremented (the recent is 6 and will be 7 in the near future),
arbitrarily bump it to 9, giving a headroom for a decade.
Note that the version number examples are kept to illustrate the
numbering scheme.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
[jc: tweaked the initial 9.x mention slightly]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250922074219.26241-1-bagasdotme@gmail.com>
Replace the explicit call to imx_rproc_put_scu() in the remove path with
devm_add_action_or_reset(). Ensure proper cleanup of scu resources and
simplify the code by leveraging the device-managed resource framework.
Additionally:
- Remove the IMX_RPROC_SCU_API check from imx_rproc_put_scu(), as
devm_add_action_or_reset() now exclusively handles SCU cleanup.
- Improve error reporting by using dev_err_probe() for consistency and
clarity.
- Drop the err_put_scu label, as it is now redundant due to the updated
error handling approach.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250926-imx_rproc_v3-v3-5-4c0ec279cc5f@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Replace separate calls to devm_clk_get() and clk_prepare_enable() with
devm_clk_get_enabled(), which combines clock acquisition and enabling
into a single managed step. Simplify the probe logic and remove the need
for manual clock disable in error and remove paths.
Also, update error handling to eliminate redundant cleanup steps and use
return-based error propagation where appropriate. Improve code clarity and
reduce the chance of resource leaks or incorrect ordering in cleanup paths.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250926-imx_rproc_v3-v3-4-4c0ec279cc5f@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Convert imx_rproc_free_mbox() to a devm-managed cleanup action using
devm_add_action_or_reset(). Ensure the mailbox resources are freed
automatically with the device lifecycle, simplify error handling and
removing the need for manual cleanup in probe and remove paths.
Also improve error reporting by using dev_err_probe() for consistency and
clarity.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250926-imx_rproc_v3-v3-3-4c0ec279cc5f@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
If msg_xfer() is called and the channel ring does not have enough room
to accommodate the whole message, the function sleeps and tries again.
It uses retry_count to keep track of the number of retrials done. This
variable is not used after the space check succeeds. So, remove the
retry_count = 0 statement used later in the function.
Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251007161148.422744-1-youssef.abdulrahman@oss.qualcomm.com
Replace manual destroy_workqueue() calls in error and remove paths with a
devm_add_action_or_reset() helper. Ensure the workqueue is properly
cleaned up with the device lifecycle, and simplify error handling in probe
by removing now-unnecessary labels and cleanup steps.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250926-imx_rproc_v3-v3-2-4c0ec279cc5f@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Proper cleanup should be done when rproc_add() fails by invoking both
pm_runtime_disable() and pm_runtime_put_noidle() to avoid leaving the
device in an inconsistent power state.
Fix it by adding pm_runtime_put_noidle() and pm_runtime_disable()
in the error path.
Also Update the remove() callback to use pm_runtime_put_noidle() instead of
pm_runtime_put(), to clearly indicate that only need to restore the usage
count.
Fixes: a876a3aacc ("remoteproc: imx_rproc: detect and attach to pre-booted remote cores")
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Hiago De Franco <hiago.franco@toradex.com>
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250926-imx_rproc_v3-v3-1-4c0ec279cc5f@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Sync the ja_JP translation with the following upstream commits:
commit 8401aa1f59 ("Documentation/SubmittingPatches: describe the Fixes: tag")
commit 19c3fe285c ("docs: Explicitly state that the 'Fixes:' tag shouldn't split lines")
commit 5b5bbb8cc5 ("docs: process: Add an example for creating a fixes tag")
commit 6356f18f09 ("Align git commit ID abbreviation guidelines and checks")
The mix of plain text and reST markup for ``git bisect`` is intentional to
align with the eventual reST conversion.
Signed-off-by: Akiyoshi Kurita <weibu@redadmin.org>
Reviewed-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250924192426.2743495-1-weibu@redadmin.org>
The term "userspace" should be a single word. Fix the typo
"userpace" accordingly.
Signed-off-by: Akiyoshi Kurita <weibu@redadmin.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250926190019.41788-1-weibu@redadmin.org>
Two threads of the same process can potential read and write parallelly to
head and tail pointers of the same DBC request queue. This could lead to a
race condition and corrupt the DBC request queue.
Fixes: ff13be8303 ("accel/qaic: Add datapath")
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
[jhugo: Add fixes tag]
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251007061837.206132-1-youssef.abdulrahman@oss.qualcomm.com
Include linux/sched/signal.h in qaic_control.c
to avoid implicit inclusion of signal_pending().
Signed-off-by: Zack McKevitt <zmckevit@qti.qualcomm.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251007154525.415039-1-youssef.abdulrahman@oss.qualcomm.com
SR-IOV operation relies on the primary GT's GuC to operate (in both PF
and VF mode). Don't enable the .has_sriov flag if the primary-GT was
disabled by configfs.
v2:
- Move handling to xe_info_init(). (Michal)
v3:
- Just update the .has_sriov flag in xe_info_init_early(). (Michal)
v4:
- Drop unnecessary comment. (Michal)
- Flip condition order for consistency with other checks. (Michal)
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-48-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Preventing the driver from initializing GTs of specific type(s) can be
useful for debugging and early hardware bringup. Add a configfs
attribute to allow this kind of control for debugging.
With today's platforms and software design, this configuration setting
is only effective for disabling the media GT since the driver currently
requires that there always be a primary GT to probe the device. However
this might change in the future --- in theory it should be possible
(with some additional driver work) to allow an igpu device to come up
with only the media GT and no primary GT. Or to allow an igpu device to
come up with no GTs at all (for display-only usage). A primary GT will
likely always be required on dgpu platforms because we rely on the BCS
engines inside the primary GT for various vram operations.
v2:
- Expand/clarify kerneldoc for configfs attribute. (Gustavo)
- Tighten type usage in gt_types[] structure. (Gustavo)
- Adjust string parsing/name matching to match exact GT names and not
accept partial names. (Gustavo)
v3:
- Switch to scope-based cleanup in gt_types_allowed_store() to fix a
leak if the device is already bound. (Gustavo)
- Switch configfs lookup interface to two boolean functions that
specify whether primary/media are supported rather than one function
that returns a mask. This is simpler to use and understand.
v4:
- Rename xe_configfs_*_gt_supported to xe_configfs_*_gt_allowed for
consistency with configfs interface and other functions. (Gustavo)
- Simplify boolean check in xe_configfs_*_gt_allowed. (Michal)
- Use xe_info() for message printing. (Michal)
- Use guard() instead of scoped_guard(). (Michal)
- Make new functions take 'struct pci_dev' for consistency with other
configfs lookup functions. (Michal)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-47-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
xe_info_init() is getting a bit long and hard to follow. Break the
allocation and basic initialization of the xe_gt structures out to their
own functions.
v2:
- Rename new functions from init_* to alloc_*. (Gustavo)
- Move early NULL return of media GT before allocation. (Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-46-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
If the primary is GT is disabled via configfs, we can't read the GT
registers that would tell us whether the BIOS has disabled FlatCCS on a
platform that would otherwise have it; we'll just proceed as if the
FlatCCS is still enabled. This is similar to the situation seen by
SRIOV VFs and doesn't cause any functional problems since the hardware
will simply drop writes to the CCS region and reads will always come
back as 0 (indicating uncompressed data). We'll simply miss out on the
chance to avoid some unnecessary overhead during BO creation and
migration.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-45-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
If the primary GT is disabled, skip the check for this workaround (which
only applies to dgpu platforms where the primary GT cannot be NULL).
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-44-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Wa_22014953428 was incorrectly labelled with a release-specific ID
number rather than the cross-platform lineage number; fix that.
Also check that the GT is not NULL before trying to lookup the
workaround in it. Since this workaround only applies to DG2 discrete
GPUs (where the primary GT cannot be disabled), no coverage is lost.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-43-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Don't try to lookup Wa_14018094691 on a NULL GT when the primary GT is
disabled. Since this whole workaround centers around mid-thread
preemption behavior, the workaround isn't relevant if the primary GT
(where the engines that can do MTP live) is disabled.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-42-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
FUNC matches in RTP only pass the GT and hwe, preventing them from being
used effectively in device workarounds. Add an additional xe_device
parameter so that we can use them in device workarounds where a GT may
not be available.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-41-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
When Wa_22010954014 and Wa_14022085890 were first implemented, we didn't
have a device workaround infrastructure so we hacked them into the GT
workaround list. Now that we have proper device workaround support,
move them to the proper place. Note that Wa_14022085890 specifically
applies to BMG-G21 platforms, so this requires defining a BMG
subplatform to capture the correct subset of device IDs.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-40-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
If the primary GT is disabled via configfs, we shouldn't try to access
it to lookup BCS/CCS engine masks. For the purposes of IRQ reset (which
masks & disables interrupts in an sgunit register), assume all possible
instances are present.
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-39-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
The display part of Wa_22019338487 (i.e., avoiding use of stolen memory)
is using a platform test rather than an graphics/media IP test. Since
this workaround is focused on non-GT uses of stolen memory, it makes
sense that we'd want to still apply the workaround on affected platforms
even if the GTs themselves are disabled via configfs.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-38-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
If the primary GT is disabled via configfs, we need to make sure that we
don't search for this workaround on a NULL xe_gt pointer. Since we can
disable the primary GT only on igpu platforms, the media GT is the one
we'd want to check anyway for this workaround.
The ternary operators in ggtt_update_access_counter() were getting a bit
long/complicated, so rewrite them with regular if/else statements.
While we're at it, throw in a couple extra assertions to make sure that
we're truly picking the expected GT according to igpu/dgpu type.
v2:
- Adjust indentation/wrapping; it's easier to read this with longer,
unwrapped lines. (Lucas)
- Tweak wording of commit message to remove ambiguity. (Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-37-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
GT ID#0 (primary GT on tile 0) may not always be available if the
primary GT has been disabled via configfs. Instead use the first
available GT when determining which PMU events are supported. If there
are no GTs, then don't advertise any GT-related events.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-36-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
The hwconfig table is part of the primary GT's GuC firmware. If the
primary GT is disabled, the hwconfig is unavailable and should be
reported to userspace as having size 0.
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-35-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
If the primary GT is disabled via configfs, GT-side L2 and TD cache
flushes are unnecessary since nothing is using/filling these caches.
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-34-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
During the early days of the Xe driver, there were cases where we
accessed some fields in the primary GT's xe_gt structure before the GT
itself was formally initialized; this required that the structure itself
be allocated during xe_tile_init_early(). A lot of refactoring of the
device probe has happened since that time and there's no longer a need
to allocate the primary GT early. Move the allocation into
xe_info_init() where GT initialization happens and where we're doing the
allocation of the media GT.
v2:
- Only make this change after a separate patch to perform VF GMD_ID
lookup with a dummy GT instead of xe_root_mmio_gt().
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-33-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
SRIOV VF initialization has a bit of a chicken and egg design problem.
Determining the IP version of the graphics and media IPs can't be done
via direct register reads as it is on PF or native and instead requires
querying the GuC. However initialization of the GT, including its GuC,
needs to wait until after we know the IP versions so that the proper
initialization steps for the platform/IP are followed.
Currently the (somewhat hacky) solution is to manually fill out just
enough fields in tile 0's primary GT structure to make it look as if the
GT has been initialized so that the GuC can be partially initialized and
queried to obtain the GMD_ID values. When the GT gets properly
initialized during the regular flows, the hacked-up values will get
overwritten as part of the general initialization flows.
Rather than using tile 0's primary GT structure to hold the hacked up
values for querying every GT on every tile, instead allocate a dedicated
dummy structure. This will allow us to move the tile->primary_gt's
allocation to a more consistent place later in the initialization flow
in future patches (i.e., we shouldn't even allocate this GT structure if
the GT is disabled/unavailable). It also helps ensure there can't be
any accidental leakage of initialization or state between the dummy
initialization for GMD_ID and the real driver initialization of the GT.
v2:
- Initialize gt->tile for temporary GT. (CI, Michal)
- Use scope-based cleanup handler to free temp GT. (Michal)
- Propagate actual error code from xe_gt_sriov_vf_bootstrap() rather
than just setting IP version to 0.0 now that read_gmdid() can return
an error. (Michal)
v3:
- Explicitly initialize gt to NULL, just in case something else gets
inserted before the kzalloc() in the future. (Lucas)
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-32-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
FlatCCS presence/absence is a flag that should be tracked at the
platform level rather than the IP level. FlatCCS affects the
device-wide memory initialization and reservations so its effects are
not confined to a single IP block or GT. This is also a trait that
should be tied to the platform even if the graphics IP itself is not
present (e.g., if we disable the primary GT via configfs).
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-31-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Restrictions and requirements on VRAM alignment are something that
should be tracked at the platform level rather than the IP level. Even
when mixing and matching various graphics, media, and display IP blocks,
the platform as a whole has to have consistent memory allocation
handling. This is also a trait that should be tied to the platform even
if the graphics IP itself is not present (e.g., if we disable the
primary GT via configfs).
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-30-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
The number of page table levels for PPGTT virtual addresses is something
that should be tracked at the platform level rather than the IP level.
Even when mixing and matching various graphics, media, and display IP
blocks, the platform as a whole has to have consistent page table
handling. This is also a trait that should be tied to the platform even
if the graphics IP itself is not present (e.g., if we disable the
primary GT via configfs).
v2:
- Drop default value of 4 and explicitly set the value in each platform
descriptor. (Lucas)
v3:
- Drop outdated code comment and commit message paragraph about default
value. (Gustavo)
v4:
- Add missing setting for tgl_desc. (Gustavo)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-29-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
The number of virtual address bits is something that should be tracked
at the platform level rather than the IP level. Even when mixing and
matching various graphics, media, and display IP blocks, the platform as
a whole has to have consistent page table handling. This is also a
trait that should be tied to the platform even if the graphics IP itself
is not present (e.g., if we disable the primary GT via configfs).
v2:
- Drop the default value of 48 and explicitly set it in each relevant
descriptor. (Lucas, Michal)
v3:
- Drop an outdated comment about default value. (Michal)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-28-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Display interrupt handling has no relation to GT(s) on the platforms
supported by the Xe driver. We only call xe_display_irq_postinstall
with the first tile's primary GT, so the single condition that uses the
GT pointer within the function always evaluates to true. Drop the
unnecessary parameter and the condition.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-27-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
The HuC initialization code determines whether a platform can have a HuC
on the primary GT by checking whether tile->media_gt is NULL; old Xe1
platforms that combined render+media into a single GT will always have a
NULL media_gt pointer. However once we allow media to be disabled via
configfs, there will also be cases where tile->media_gt is NULL on more
modern platforms, causing this condition to behave incorrectly.
To handle cases where media gets disabled via configfs (or theoretical
cases where media is truly fused off in hardware), change the condition
to consider the graphics version of the primary GT; only the old Xe1
platforms with graphics versions 12.55 or earlier should try to
initialize a HuC on the primary GT.
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-26-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Currently, if find_and_map_user_pages() takes a DMA xfer request from the
user with a length field set to 0, or in a rare case, the host receives
QAIC_TRANS_DMA_XFER_CONT from the device where resources->xferred_dma_size
is equal to the requested transaction size, the function will return 0
before allocating an sgt or setting the fields of the dma_xfer struct.
In that case, encode_addr_size_pairs() will try to access the sgt which
will lead to a general protection fault.
Return an EINVAL in case the user provides a zero-sized ALP, or the device
requests continuation after all of the bytes have been transferred.
Fixes: 96d3c1cade ("accel/qaic: Clean up integer overflow checking in map_user_pages()")
Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251007122320.339654-1-youssef.abdulrahman@oss.qualcomm.com
When a BO is created, qaic will use the page allocator to request the
memory chunks that the BO will be composed of in-memory. The number of
chunks increases when memory is segmented. For example, a 16MB BO can
be composed of four 4MB chunks or 4096 4KB chunks.
A BO is then sliced into a single or multiple slices to be transferred
to the device on the DBC's xfer queue. For that to happen, the slice
needs to encode its memory chunks into DBC requests and keep track of
them in an array, which is allocated using kcalloc(). Knowing that the
BO might be very fragmented, this array can grow so large that the
allocation may fail to find contiguous memory for it.
Replace kcalloc() with kvcalloc() to allocate the DBC requests array
for a slice.
Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251007121845.337382-1-youssef.abdulrahman@oss.qualcomm.com
Kunit's generate_params() was recently updated to take an additional
test context parameter. Xe's IP and platform parameter generators were
updated accordingly at the same time, but the new parameter was not
added to the functions' kerneldoc, resulting in the following warnings:
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:78 function parameter 'test' not described in 'xe_pci_fake_data_gen_params'
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:254 function parameter 'test' not described in 'xe_pci_graphics_ip_gen_param'
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:278 function parameter 'test' not described in 'xe_pci_media_ip_gen_param'
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:302 function parameter 'test' not described in 'xe_pci_id_gen_param'
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:390 function parameter 'test' not described in 'xe_pci_live_device_gen_param'
5 warnings as errors
Document the new parameter to eliminate the warnings and make CI happy.
Fixes: b9a214b5f6 ("kunit: Pass parameterized test context to generate_params()")
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://lore.kernel.org/r/20251013153014.2362879-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
As soon as we queue MHI buffers to receive the bootlog from the device,
we could be receiving data. Therefore all the resources needed to
process that data need to be setup prior to queuing the buffers.
We currently initialize some of the resources after queuing the buffers
which creates a race between the probe() and any data that comes back
from the device. If the uninitialized resources are accessed, we could
see page faults.
Fix the init ordering to close the race.
Fixes: 5f8df5c6de ("accel/qaic: Add bootlog debugfs")
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251007115750.332169-1-youssef.abdulrahman@oss.qualcomm.com
Since the Handover Protocol was deprecated, the recommended approach is
to provide an initrd using a UEFI boot service with the
LINUX_EFI_INITRD_MEDIA_GUID device path. Documentation for the new
approach has been no more than an admonition with a link to an existing
implementation.
Provide a short explanation of this functionality, to ease future
implementations without having to reverse engineer existing ones.
[Bagas: Don't use :ref: link to EFI stub documentation and refer to
OVMF/edk2 implementation]
Signed-off-by: Hugo Osvaldo Barrera <hugo@whynothugo.nl>
Link: https://lore.kernel.org/r/20250428131206.8656-2-hugo@whynothugo.nl
Co-developed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251013085718.27085-1-bagasdotme@gmail.com>
Since commit 9ba9d11544 ("media: ivtv: Access v4l2_fh from file")
all ioctl handlers have been ported to operate on the file * first
function argument.
The ivtv DVB layer calls ivtv_init_on_first_open() when the driver
needs to start streaming. This function calls the s_input() and
s_frequency() ioctl handlers directly, but being called from the driver
context, it doesn't have a valid file * to pass them. This causes the
ioctl handlers to deference an invalid pointer.
Fix this by moving the implementation of those ioctls to two helper
functions.
The ivtv_do_s_input() helper accepts a struct ivtv * as first argument,
which is easily accessible in ivtv_init_on_first_open() as well as from
the file * argument of the ioctl handler.
The ivtv_s_frequency() takes an ivtv_stream * instead. The stream * can
safely be accessed in ivtv_init_on_first_open() where it is hard-coded
to the IVTV_ENC_STREAM_TYPE_MPG stream type, as well as from the ioctl
handler as a valid stream type is associated to each open file handle
depending on which video device node has been opened in the ivtv_open()
file operation.
The bug has been reported by Smatch.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aKL4OMWsESUdX8KQ@stanley.mountain/
Fixes: 9ba9d11544 ("media: ivtv: Access v4l2_fh from file")
Cc: stable@vger.kernel.org
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
