If there is no SoundWire machine matches the existing acpi match table,
get the required machine data from the acpi table and construct the
link adrs and endpoints. Pass the data to the default Intel SoundWire
machine driver. And we don't need to add new item to the acpi match
table in common cases.
We will construct a dummy topology name. The dummy topology is just
used to extract the platform name for function topology and should not
be used.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20251009094023.3474895-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Monolithic topology is not needed if function topology is used. Instead
of creating a dummy topology in the file system, we can skip the
existence check in the kernel.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20251009094023.3474895-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The platform name will be used construct the topology name.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251009094023.3474895-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
asoc_sdw_get_dai_type() is quite useful to convert SDCA function types
to SDW DAI types. It can be used by other drivers.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251009094023.3474895-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sof_sdw_get_tplg_files function is a callback of snd_soc_acpi_mach.
Export it to allow other modules to use it.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251009094023.3474895-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, the codec name_prefix of Intel SoundWire machine driver is
from the ACPI match table. We can have it in the asoc_sdw_codec_info
struct as a default name_prefix of a codec if there is no corresponding
audio config found in the ACPI match table.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251009094023.3474895-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, we use predefined snd_soc_acpi_link_adr tables to match the
link adr from ACPI table to select the machine driver and the topology.
However, with the mechanism, we need to create the snd_soc_acpi_link_adr
table for each audio config. The sof_sdw machine driver is used by
almost all Intel platforms with SOF and we can load required topology
file dynamically today. In other words, we can use sof_sdw machine
driver as the default machine driver for Intel SOF SoundWire codecs and
no need to create snd_soc_acpi_link_adr table for every new audio
configs.
To achieve it, we need to drop the const for some members and edit the
link adr and acpi adr data to match the data from the ACPI table.
Suggested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251009094023.3474895-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It may confuse people if "Topology file:" is printed but the topology
file is not really used. We keep the print if the topology file is
missing thus user can know what topology is missed in the file system.
And increase the log level to info for the actual topology that is used.
So that user can get which topology is used.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251009094023.3474895-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the Marvell/Synaptics Berlin pinctrl binding to DT schema
format. The "reg" property was not documented for the newer SoCs.
Otherwise, it's a straight-forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Mark the gpio/egpio as GPIO specific pin functions, othewise
the pin muxing generic framework will complain about the gpio
being already requested by a different owner.
Fixes: 87ebcd8bae ("pinctrl: qcom: Add glymur pinctrl driver")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The platform specific configuration is already passed on to the generic
msm probe. So it's useless to exist in the match table next to the
compatible. So drop it from match table.
Fixes: 87ebcd8bae ("pinctrl: qcom: Add glymur pinctrl driver")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Rename the GPIO controller node from "msmgpio" to "tlmm" to match the
convention used by other Qualcomm SoCs.
Suggested-by: Shinjo Park <peremen@gmail.com>
Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add the required macros for the pinmux nodes of the MediaTek MT6878 SoC.
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Update the APMU clock controller's compatible to allow the new power
domain driver to probe. Also add the first two power domain consumers:
IOMMU (fixes probing) and framebuffer.
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
The board is known to have 1 GiB of DRAM with the first 16 MiB unusable.
Instead of relying on the bootloader to fill in the memory node, do it
ourselves.
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Most of the memory marked as reserved is actually usable. Delete its
reserved-memory nodes so that the memory can be used.
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
The ramoops memory region is the same for all boards based on the SoC.
Move its node to the appropriate dtsi.
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
The board has a vibrator hooked up to PWM3. Add a node for it and its
associated pinctrl configuration.
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Commit a41fcca4b3 ("mmc: sdhci-pxav3: set NEED_RSP_BUSY capability")
fixed eMMC probing on this board. Enable the eMMC and add its pinctrl.
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Right now, the CD GPIO is defined as active high with a cd-inverted
property. Just define the GPIO as active low instead.
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Set some basic properties of the SDIO card of the samsung,coreprimevelte
smartphone.
The SDIO is used as an interface for WiFi, Bluetooth and FM radio
serviced by the Marvell 88W8777 (SD8777) chipset. Support for this
chipset is currently not in-tree because the firmware is not available
in linux-firmware, however it is possible to trivially run it
out-of-tree using the mwifiex and Marvell Bluetooth drivers with some
caveats.
Link: https://lore.kernel.org/r/20231029111807.19261-1-balejk@matfyz.cz/
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Reviewed-by: Duje Mihanović <duje@dujemihanovic.xyz>
[Duje: fix formatting of pins_0 and fast_pins_1 pin arrays]
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Bind touchscreen for the samsung,coreprimevelte smartphone. The
downstream code sets the VDD voltage to the exact value of 3.1 V,
however it's been empirically verified that the lower bound used here
sufficies for the proper operation of the chip and is thus used for
power-saving purposes.
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Reviewed-by: Duje Mihanović <duje@dujemihanovic.xyz>
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Bind power management chip to the samsung,coreprimevelte smartphone.
This enables support for onkey and RTC as well as for regulators two of
which are explicitly bound here to the SD card.
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Reviewed-by: Duje Mihanović <duje@dujemihanovic.xyz>
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Add the "ti,am62l-padconf" compatible to allow for some changes in the
driver in the future when needed.
Signed-off-by: Bryan Brattlof <bb@ti.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The gain ranges specified in Renesas IDT821034 codec documentation
are [-3dB;+13dB] in the transmit path (ADC) and [-13dB;+3dB] in the
receive path (DAC). Allthough the registers allow programming values
outside those ranges, the signal S/N and distorsion are only
guaranteed in the specified ranges.
Set ranges to the specified ones.
Fixes: e51166990e ("ASoC: codecs: Add support for the Renesas IDT821034 codec")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://patch.msgid.link/2bd547194f3398e6182f770d7d6be711c702b4b2.1760029099.git.christophe.leroy@csgroup.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
Add bindings for QCS615 sound card, which looks fully
compatible with existing SM8250.
Signed-off-by: Le Qi <le.qi@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251009090619.1097388-2-le.qi@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add driver support for the pin controller found in the MediaTek
Dimensity 7300 (MT6878) SoC.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
MT6878 uses different debounce times than other SoCs. Add them to the
EINT driver.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add device-tree bindings for the pin controller and the EINT controller
found in the MediaTek MT6878 SoC.
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This smartphone uses a MediaTek MT6582 system-on-chip with 512MB of RAM.
It can currently boot into initramfs with a working UART and
Simple Framebuffer using already initialized panel by the bootloader.
Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add an entry for Alcatel Pop C7 (OT-7041D) smartphone board, named
yarisxl, based on MT6582 SoC.
Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add missing property for SMP.
Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Other SoC DTSI files define this property for their uart nodes.
Do the same here too, to be consistent.
Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Bindings already have mt6582 compatible for timer, so add that to DTSI.
While at it, remove clock-names property (which is not required by timer
node) and fix node address.
Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
SoC's DTSI does not require compatible property. Drop that.
Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Sort fixed clocks nodes by clock frequency and memory mapped device
nodes by reg address. Also, sort properties as shown in dt-bindings
examples.
Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Memory mapped devices are part of soc. So, add such node and move those
devices into it.
Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add support for booting secondary CPUs on MT6582.
Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add a compatible string for the MT6582 SoC.
Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Popular cheap PWM fans for this machine, like the ones coming in
heatsink+fan combos will not work properly at the currently defined
medium speed. Trying different pwm setting using a command
echo $value > /sys/devices/platform/pwm-fan/hwmon/hwmon1/pwm1
I found:
pwm1 value fan rotation speed cpu temperature notes
-----------------------------------------------------------------
0 maximal 31.5 Celsius too noisy
40 optimal 35.2 Celsius no noise hearable
95 minimal
above 95 does not rotate 55.5 Celsius
-----------------------------------------------------------------
Thus only cpu-active-high and cpu-active-low modes are usable.
I think this is wrong.
This patch fixes cpu-active-medium settings for bpi-r3 board.
I know, the patch is not ideal as it can break pwm fan for some users.
Likely this is the only official mt7986-bpi-r3 heatsink+fan solution
available on the market.
This patch may not be enough. Users may wants to tweak their thermal_zone0
trip points, thus tuning fan rotation speed depending on cpu temperature.
That can be done on the base of the following example:
=== example =========
# cpu temperature below 25 Celsius degrees, no rotation
echo 25000 > /sys/class/thermal/thermal_zone0/trip_point_4_temp
# cpu temperature in [25..32] Celsius degrees, normal rotation speed
echo 32000 > /sys/class/thermal/thermal_zone0/trip_point_3_temp
# cpu temperature above 50 Celsius degrees, max rotation speed
echo 50000 > /sys/class/thermal/thermal_zone0/trip_point_2_temp
=====================
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Acked-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
