Instead of sharing sd->defer_list & sd->defer_count with
many cpus, add one pair for each NUMA node.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250928084934.3266948-4-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Get rid of sd->defer_lock and adopt llist operations.
We optimize skb_attempt_defer_free() for the common case,
where the packet is queued. Otherwise sd->defer_count
is increasing, until skb_defer_free_flush() clears it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250928084934.3266948-3-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is preparation work to remove the softnet_data.defer_lock,
as it is contended on hosts with large number of cores.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250928084934.3266948-2-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski says:
====================
psp: add a kselftest suite and netdevsim implementation
Add a basic test suite for drivers that support PSP. Also, add a PSP
implementation in the netdevsim driver.
The netdevsim implementation does encapsulation and decapsulation of
PSP packets, but no crypto.
The tests cover the basic usage of the uapi, and demonstrate key
exchange and connection setup. The tests and netdevsim support IPv4
and IPv6. Here is an example run on a system with a CX7 NIC.
TAP version 13
1..28
ok 1 psp.data_basic_send_v0_ip4
ok 2 psp.data_basic_send_v0_ip6
ok 3 psp.data_basic_send_v1_ip4
ok 4 psp.data_basic_send_v1_ip6
ok 5 psp.data_basic_send_v2_ip4 # SKIP ('PSP version not supported', 'hdr0-aes-gmac-128')
ok 6 psp.data_basic_send_v2_ip6 # SKIP ('PSP version not supported', 'hdr0-aes-gmac-128')
ok 7 psp.data_basic_send_v3_ip4 # SKIP ('PSP version not supported', 'hdr0-aes-gmac-256')
ok 8 psp.data_basic_send_v3_ip6 # SKIP ('PSP version not supported', 'hdr0-aes-gmac-256')
ok 9 psp.data_mss_adjust_ip4
ok 10 psp.data_mss_adjust_ip6
ok 11 psp.dev_list_devices
ok 12 psp.dev_get_device
ok 13 psp.dev_get_device_bad
ok 14 psp.dev_rotate
ok 15 psp.dev_rotate_spi
ok 16 psp.assoc_basic
ok 17 psp.assoc_bad_dev
ok 18 psp.assoc_sk_only_conn
ok 19 psp.assoc_sk_only_mismatch
ok 20 psp.assoc_sk_only_mismatch_tx
ok 21 psp.assoc_sk_only_unconn
ok 22 psp.assoc_version_mismatch
ok 23 psp.assoc_twice
ok 24 psp.data_send_bad_key
ok 25 psp.data_send_disconnect
ok 26 psp.data_stale_key
ok 27 psp.removal_device_rx # XFAIL Test only works on netdevsim
ok 28 psp.removal_device_bi # XFAIL Test only works on netdevsim
# Totals: pass:22 fail:0 xfail:2 xpass:0 skip:4 error:0
#
# Responder logs (0):
# STDERR:
# Set PSP enable on device 1 to 0x3
# Set PSP enable on device 1 to 0x0
v2: https://lore.kernel.org/20250925211647.3450332-1-daniel.zahka@gmail.com
v1: https://lore.kernel.org/20250924194959.2845473-1-daniel.zahka@gmail.com
====================
Link: https://patch.msgid.link/20250927225420.1443468-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add tests for making sure device can disappear while associations
exist. This is netdevsim-only since destroying real devices is
more tricky.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250927225420.1443468-9-kuba@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Test TCP MSS getting auto-adjusted. PSP adds an encapsulation overhead
of 40B per packet, when used in transport mode without any
virtualization cookie or other optional PSP header fields. The kernel
should adjust the MSS for a connection after PSP tx state is reached.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250927225420.1443468-8-kuba@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add test checking conditions which lead to connections breaking.
Using bad key or connection gets stuck if device key is rotated
twice.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250927225420.1443468-7-kuba@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add tests for exercising PSP associations for TCP sockets.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250927225420.1443468-6-kuba@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add basic tests for sending data over PSP and making sure that key
rotation toggles the MSB of the spi.
Deploy PSP responder on the remote end. We also need a healthy dose
of common helpers for setting up the connections, assertions and
interrogating socket state on the Python side.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250927225420.1443468-5-kuba@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
PSP tests need the remote system to support PSP, and some PSP capable
application to exchange data with. Create a simple PSP responder app
which we can build and deploy to the remote host. The tests themselves
can be written in Python but for ease of deploying the responder is in C
(using C YNL).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250927225420.1443468-4-kuba@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Simple PSP test to getting info about PSP devices.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250927225420.1443468-3-kuba@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Provide a PSP implementation for netdevsim.
Use psp_dev_encapsulate() and psp_dev_rcv() to do actual encapsulation
and decapsulation on skbs, but perform no encryption or decryption. In
order to make encryption with a bad key result in a drop on the peer's
rx side, we stash our psd's generation number in the first byte of each
key before handing to the peer.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Co-developed-by: Daniel Zahka <daniel.zahka@gmail.com>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250927225420.1443468-2-kuba@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since the bus ops were retired the iommu subsystem changed to using fwspec
to match the iommu driver to the iommu device. If a device has a NULL
fwspec then it is matched to the first iommu driver with a NULL fwspec,
effectively disabling support for systems with more than one non-fwspec
iommu driver.
Thus, if the iommufd selfest are run in an x86 system that registers a
non-fwspec iommu driver they fail to bind their mock devices to the mock
iommu driver.
Fix this by allocating a software fwnode for mock iommu driver's
iommu_device, and set it to the device which mock iommu driver created.
This is done by adding a new helper iommu_mock_device_add() which abuses
the internals of the fwspec system to establish a fwspec before the device
is added and is careful not to leak it. A matching dummy fwspec is
automatically added to the mock iommu driver.
Test by "make -C toosl/testing/selftests TARGETS=iommu run_tests":
PASSED: 229 / 229 tests passed.
In addition, this issue is also can be found on amd platform, and
also tested on a amd machine.
Link: https://patch.msgid.link/r/20250925054730.3877-1-kanie@linux.alibaba.com
Fixes: 17de3f5fdd ("iommu: Retire bus ops")
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Qinyun Tan <qinyuntan@linux.alibaba.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The HP ProDesk 400 (SSID 103c:83f3) also needs a quirk for
enabling HDMI outputs. This patch adds the required quirk
entry.
Signed-off-by: Steven 'Steve' Kendall <skend@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The poll interval is a fixed value, so we don't need a static variable
for it. The change also allows to use standard macro
module_platform_driver, avoiding some boilerplate code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/b8079f96-6865-431c-a908-a0b9e9bd5379@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
page_pool_init() returns E2BIG when the page_pool size goes above 32K
pages. As some drivers are configuring the page_pool size according to
the MTU and ring size, there are cases where this limit is exceeded and
the queue creation fails.
The page_pool size doesn't have to cover a full queue, especially for
larger ring size. So clamp the size instead of returning an error. Do
this in the core to avoid having each driver do the clamping.
The current limit was deemed to high [1] so it was reduced to 16K to avoid
page waste.
[1] https://lore.kernel.org/all/1758532715-820422-3-git-send-email-tariqt@nvidia.com/
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250926131605.2276734-2-dtatulea@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The tidss_crtc_reset() function will (rightfully) destroy any
pre-existing state.
However, the tidss CRTC driver has its own CRTC state structure that
subclasses drm_crtc_state, and yet will destroy the previous state
by calling __drm_atomic_helper_crtc_destroy_state() and kfree() on its
drm_crtc_state pointer.
It works only because the drm_crtc_state is the first field in the
structure, and thus its offset is 0. It's incredibly fragile however, so
let's call our destroy implementation in such a case to deal with it
properly.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250902-drm-state-readout-v1-22-14ad5315da3f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250902-drm-state-readout-v1-22-14ad5315da3f@kernel.org
Since the value returned by 'tipc_nodeid2string()' is not used, the
function may be adjusted to return the length of the result, which
is helpful to drop a few calls to 'strlen()' in 'tipc_link_create()'
and 'tipc_link_bc_create()'. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250926074113.914399-1-dmantipov@yandex.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Software can only initialize the PIR and CIR of the command BD ring after
a FLR, and these two registers can only be set to 0. But the reset values
of these two registers are 0, so software does not need to update them.
If there is no a FLR and PIR and CIR are not 0, resetting them to 0 or
other values by software will cause the command BD ring to work
abnormally. This is because of an internal context in the ring prefetch
logic that will retain the state from the first incarnation of the ring
and continue prefetching from the stale location when the ring is
reinitialized. The internal context can only be reset by the FLR.
In addition, there is a logic error in the implementation, next_to_clean
indicates the software CIR and next_to_use indicates the software PIR.
But the current driver uses next_to_clean to set PIR and use next_to_use
to set CIR. This does not cause a problem in actual use, because the
current command BD ring is only initialized after FLR, and the initial
values of next_to_use and next_to_clean are both 0.
Therefore, this patch removes the initialization of PIR and CIR. Instead,
next_to_use and next_to_clean are initialized by reading the values of
PIR and CIR.
Fixes: 4701073c3d ("net: enetc: add initial netc-lib driver to support NTMP")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250926013954.2003456-1-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Syzbot reported an uninitialized value bug in nci_init_req, which was
introduced by commit 5aca7966d2 ("Merge tag
'perf-tools-fixes-for-v6.17-2025-09-16' of
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools").
This bug arises due to very limited and poor input validation
that was done at nic_valid_size(). This validation only
validates the skb->len (directly reflects size provided at the
userspace interface) with the length provided in the buffer
itself (interpreted as NCI_HEADER). This leads to the processing
of memory content at the address assuming the correct layout
per what opcode requires there. This leads to the accesses to
buffer of `skb_buff->data` which is not assigned anything yet.
Following the same silent drop of packets of invalid sizes at
`nic_valid_size()`, add validation of the data in the respective
handlers and return error values in case of failure. Release
the skb if error values are returned from handlers in
`nci_nft_packet` and effectively do a silent drop
Possible TODO: because we silently drop the packets, the
call to `nci_request` will be waiting for completion of request
and will face timeouts. These timeouts can get excessively logged
in the dmesg. A proper handling of them may require to export
`nci_request_cancel` (or propagate error handling from the
nft packets handlers).
Reported-by: syzbot+740e04c2a93467a0f8c8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=740e04c2a93467a0f8c8
Fixes: 6a2968aaf5 ("NFC: basic NCI protocol implementation")
Tested-by: syzbot+740e04c2a93467a0f8c8@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Deepak Sharma <deepak.sharma.472935@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250925132846.213425-1-deepak.sharma.472935@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Our debugfs helper xe_gt_debugfs_show_with_rpm() expects print()
functions to return int. New signature allows us to drop wrapper.
While around, move kernel-doc closer to the function definition,
as suggested in the doc-guide.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250923211613.193347-6-michal.wajdeczko@intel.com
Our debugfs helper xe_gt_debugfs_show_with_rpm() expects print()
functions to return int. New signature allows us to drop wrapper.
While around, move kernel-doc closer to the function definition,
as suggested in the doc-guide.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250923211613.193347-5-michal.wajdeczko@intel.com
Our debugfs helper xe_gt_debugfs_show_with_rpm() expects print()
functions to return int. New signature allows us to drop wrapper.
While around, print additional separation lines using puts() to
avoid output with leading \n which might confuse some printers.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250923211613.193347-4-michal.wajdeczko@intel.com
Our debugfs helper xe_gt_debugfs_show_with_rpm() expects print()
functions to return int. New signature allows us to drop wrapper.
While around, print additional separation lines using puts() to
avoid output with leading \n which might confuse some printers.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250923211613.193347-3-michal.wajdeczko@intel.com
This introduces a test for IPSec offload over bonding, utilizing netdevsim
for the testing process, as veth interfaces do not support IPSec offload.
The test will ensure that the IPSec offload functionality remains operational
even after a failover event occurs in the bonding configuration.
Here is the test result:
TEST: bond_ipsec_offload (active_slave eth0) [ OK ]
TEST: bond_ipsec_offload (active_slave eth1) [ OK ]
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250925023304.472186-2-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The active-backup bonding mode supports XFRM ESP offload. However, when
a bond is added using command like `ip link add bond0 type bond mode 1
miimon 100`, the `ethtool -k` command shows that the XFRM ESP offload is
disabled. This occurs because, in bond_newlink(), we change bond link
first and register bond device later. So the XFRM feature update in
bond_option_mode_set() is not called as the bond device is not yet
registered, leading to the offload feature not being set successfully.
To resolve this issue, we can modify the code order in bond_newlink() to
ensure that the bond device is registered first before changing the bond
link parameters. This change will allow the XFRM ESP offload feature to be
correctly enabled.
Fixes: 007ab53455 ("bonding: fix feature flag setting at init time")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250925023304.472186-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce a new document, flow_control.rst, to provide a comprehensive
guide on Ethernet Flow Control in Linux. The guide explains how flow
control works, how autonegotiation resolves pause capabilities, and how
to configure it using ethtool and Netlink.
In parallel, document the pause and pause-stat attributes in the
ethtool.yaml netlink spec. This enables the ynl tool to generate
kernel-doc comments for the corresponding enums in the UAPI header,
making the C interface self-documenting.
Finally, replace the legacy flow control section in phy.rst with a
reference to the new document and add pointers in the relevant C source
files.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250924120241.724850-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The error irq handling needs to mask page table errors on gen 2/3 with
FBC. See commit e7e12f6ec8 ("drm/i915: Mask page table errors on
gen2/3 with FBC") for details.
We want to avoid using display feature checks in i915 core code. Since
FBC can't be fused off on gen 2/3, just list the platforms that support
FBC. Add a macro purely for making the code self-documenting.
With this, we can drop the intel_display_core.h include, and make struct
intel_display opaque inside i915_irq.c.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250929133418.2033006-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Remove psb_fbdev_fb_setcolreg(), which hasn't been called in almost
a decade.
Gma500 commit 4d8d096e9a ("gma500: introduce the framebuffer support
code") added the helper psb_fbdev_fb_setcolreg() for setting the fbdev
palette via fbdev's fb_setcolreg callback. Later
commit 3da6c2f3b7 ("drm/gma500: use DRM_FB_HELPER_DEFAULT_OPS for
fb_ops") set several default helpers for fbdev emulation, including
fb_setcmap.
The fbdev subsystem always prefers fb_setcmap over fb_setcolreg. [1]
Hence, the gma500 code is no longer in use and gma500 has been using
drm_fb_helper_setcmap() for several years without issues.
Fixes: 3da6c2f3b7 ("drm/gma500: use DRM_FB_HELPER_DEFAULT_OPS for fb_ops")
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Stefan Christ <contact@stefanchrist.eu>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.10+
Link: https://elixir.bootlin.com/linux/v6.16.9/source/drivers/video/fbdev/core/fbcmap.c#L246 # [1]
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20250929082338.18845-1-tzimmermann@suse.de
Add support for reading / writing to the exfat volume label from the
FS_IOC_GETFSLABEL and FS_IOC_SETFSLABEL ioctls
Co-developed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Ethan Ferguson <ethan.ferguson@zetier.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Currently, exfat utf8 mount option depends on the iocharset option
value. After exfat remount, utf8 option may become inconsistent with
iocharset option.
If the options are inconsistent; (specifically, iocharset=utf8 but
utf8=0) readdir may reference uninitalized NLS, leading to a null
pointer dereference.
Extract and combine utf8/iocharset setup logic into exfat_set_iocharset().
Then Replace iocharset setup logic to exfat_set_iocharset to prevent
utf8/iocharset option inconsistentcy after remount.
Reported-by: syzbot+3e9cb93e3c5f90d28e19@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3e9cb93e3c5f90d28e19
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Fixes: acab02ffcd6b ("exfat: support modifying mount options via remount")
Tested-by: syzbot+3e9cb93e3c5f90d28e19@syzkaller.appspotmail.com
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Before this commit, all exfat-defined mount options could not be
modified dynamically via remount, and no error was returned.
After this commit, these three exfat-defined mount options
(discard, zero_size_dir, and errors) can be modified dynamically
via remount. While other exfat-defined mount options cannot be
modified dynamically via remount because their old settings are
cached in inodes or dentries, modifying them will be rejected with
an error.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Loading the allocation bitmap is very slow if user set the small cluster
size on large partition.
For optimizing it, This patch uses sb_breadahead() read the allocation
bitmap. It will improve the mount time.
The following is the result of about 4TB partition(2KB cluster size)
on my target.
without patch:
real 0m41.746s
user 0m0.011s
sys 0m0.000s
with patch:
real 0m2.525s
user 0m0.008s
sys 0m0.008s
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
When using &, it's unnecessary to have parentheses afterward. Remove
redundant parentheses to enhance readability.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
The result of integer comparison already evaluates to bool. No need for
explicit conversion.
No functional impact.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
syzbot created an exfat image with cluster bits not set for the allocation
bitmap. exfat-fs reads and uses the allocation bitmap without checking
this. The problem is that if the start cluster of the allocation bitmap
is 6, cluster 6 can be allocated when creating a directory with mkdir.
exfat zeros out this cluster in exfat_mkdir, which can delete existing
entries. This can reallocate the allocated entries. In addition,
the allocation bitmap is also zeroed out, so cluster 6 can be reallocated.
This patch adds exfat_test_bitmap_range to validate that clusters used for
the allocation bitmap are correctly marked as in-use.
Reported-by: syzbot+a725ab460fc1def9896f@syzkaller.appspotmail.com
Tested-by: syzbot+a725ab460fc1def9896f@syzkaller.appspotmail.com
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
For exFAT filesystems with 4MB read_ahead_size, removing the storage device
when the read operation is in progress, which cause the last read syscall
spent 150s [1]. The main reason is that exFAT generates excessive log
messages [2].
After applying this patch, approximately 300,000 lines of log messages
were suppressed, and the delay of the last read() syscall was reduced
to about 4 seconds.
[1]:
write(5, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 131072) = 131072 <0.000120>
read(4, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 131072) = 131072 <0.000032>
write(5, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 131072) = 131072 <0.000119>
read(4, 0x7fccf28ae000, 131072) = -1 EIO (Input/output error) <150.186215>
[2]:
[ 333.696603] exFAT-fs (vdb): error, failed to access to FAT (entry 0x0000d780, err:-5)
[ 333.697378] exFAT-fs (vdb): error, failed to access to FAT (entry 0x0000d780, err:-5)
[ 333.698156] exFAT-fs (vdb): error, failed to access to FAT (entry 0x0000d780, err:-5)
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCaNZ35gAKCRCAXGG7T9hj
vg/BAPwOpOT8J8TV2CwxRdqEJAJBysoicMbxGw+6v97OssMymwD+JCWYkrt6pyrn
mgKCT6FSOB6ZQ50IWYSr8DMQXjHybAU=
=NzbF
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- fix the migration of a Xen virq to another cpu plus some related
cleanup work
- clean up Xen-PV mode specific code, resulting in removing some of
that code in the resulting binary in case CONFIG_XEN_PV is not set
- fixes and cleanup for suspend handling under Xen
* tag 'for-linus-6.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: take system_transition_mutex on suspend
xen/manage: Fix suspend error path
xen/events: Update virq_to_irq on migration
xen/events: Return -EEXIST for bound VIRQs
xen/events: Cleanup find_virq() return codes
x86/xen: select HIBERNATE_CALLBACKS more directly
drivers/xen/gntdev: use xen_pv_domain() instead of cached value
xen: replace XENFEAT_auto_translated_physmap with xen_pv_domain()
xen: rework xen_pv_domain()
- powerpc support for BPF arena and arena atomics
- Patches to switch to msi parent domain (per-device MSI domains)
- Add a lock contention tracepoint in the queued spinlock slowpath
- Fixes for underflow in pseries/powernv msi and pci paths
- Switch from legacy-of-mm-gpiochip dependency to platform driver
- Fixes for handling TLB misses
- Introduce support for powerpc papr-hvpipe
- Add vpa-dtl PMU driver for pseries platform
- Misc fixes and cleanups
Thanks to: Aboorva Devarajan, Aditya Bodkhe, Andrew Donnellan, Athira Rajeev, Cédric Le Goater, Christophe Leroy,
Erhard Furtner, Gautam Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Joe Lawrence, Kajol Jain, Kienan Stewart,
Linus Walleij, Mahesh Salgaonkar, Nam Cao, Nicolas Schier, Nysal Jan K.A., Ritesh Harjani (IBM), Ruben Wauters,
Saket Kumar Bhaskar, Shashank MS, Shrikanth Hegde, Tejas Manhas, Thomas Gleixner, Thomas Huth, Thorsten Blum,
Tyrel Datwyler, Venkat Rao Bagalkote,
-----BEGIN PGP SIGNATURE-----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=U2s/
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- powerpc support for BPF arena and arena atomics
- Patches to switch to msi parent domain (per-device MSI domains)
- Add a lock contention tracepoint in the queued spinlock slowpath
- Fixes for underflow in pseries/powernv msi and pci paths
- Switch from legacy-of-mm-gpiochip dependency to platform driver
- Fixes for handling TLB misses
- Introduce support for powerpc papr-hvpipe
- Add vpa-dtl PMU driver for pseries platform
- Misc fixes and cleanups
Thanks to Aboorva Devarajan, Aditya Bodkhe, Andrew Donnellan, Athira
Rajeev, Cédric Le Goater, Christophe Leroy, Erhard Furtner, Gautam
Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Joe Lawrence,
Kajol Jain, Kienan Stewart, Linus Walleij, Mahesh Salgaonkar, Nam Cao,
Nicolas Schier, Nysal Jan K.A., Ritesh Harjani (IBM), Ruben Wauters,
Saket Kumar Bhaskar, Shashank MS, Shrikanth Hegde, Tejas Manhas, Thomas
Gleixner, Thomas Huth, Thorsten Blum, Tyrel Datwyler, and Venkat Rao
Bagalkote.
* tag 'powerpc-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (49 commits)
powerpc/pseries: Define __u{8,32} types in papr_hvpipe_hdr struct
genirq/msi: Remove msi_post_free()
powerpc/perf/vpa-dtl: Add documentation for VPA dispatch trace log PMU
powerpc/perf/vpa-dtl: Handle the writing of perf record when aux wake up is needed
powerpc/perf/vpa-dtl: Add support to capture DTL data in aux buffer
powerpc/perf/vpa-dtl: Add support to setup and free aux buffer for capturing DTL data
docs: ABI: sysfs-bus-event_source-devices-vpa-dtl: Document sysfs event format entries for vpa_dtl pmu
powerpc/vpa_dtl: Add interface to expose vpa dtl counters via perf
powerpc/time: Expose boot_tb via accessor
powerpc/32: Remove PAGE_KERNEL_TEXT to fix startup failure
powerpc/fprobe: fix updated fprobe for function-graph tracer
powerpc/ftrace: support CONFIG_FUNCTION_GRAPH_RETVAL
powerpc64/modules: replace stub allocation sentinel with an explicit counter
powerpc64/modules: correctly iterate over stubs in setup_ftrace_ool_stubs
powerpc/ftrace: ensure ftrace record ops are always set for NOPs
powerpc/603: Really copy kernel PGD entries into all PGDIRs
powerpc/8xx: Remove left-over instruction and comments in DataStoreTLBMiss handler
powerpc/pseries: HVPIPE changes to support migration
powerpc/pseries: Enable hvpipe with ibm,set-system-parameter RTAS
powerpc/pseries: Enable HVPIPE event message interrupt
...
