Add a common board dtsi for use by Milk-V Mars CM and Milk-V Mars CM Lite.
Signed-off-by: E Shattow <e@freeshell.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
We are going to add some additional GCS access helpers to gcs.h in
order to avoid some forward reference problems with uaccess.
In preparation for that, lets move the existing gcssttr() and
put_user_gcs() routines into gcs.h where it makes sense to keep all
the accessors together. Further, the code which uses them already
includes gcs.h and there is an existing CONFIG_ARM64_GCS check we can
reuse. The GCSSTTR instruction description comment is corrected during
the move.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Prepare for GCS by breaking RET out into its own function, where
it makes more sense to encapsulate the new behavior independent
from the branch instructions.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Add PCIe lane equalization preset properties with all values set to 5 for
8.0 GT/s and 16.0 GT/s data rates to enhance link stability.
Co-developed-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Ziyue Zhang <ziyue.zhang@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20250904065225.1762793-4-ziyue.zhang@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Due to multiple explosion issues in the early days of the Xe driver,
the GuC load was hacked to never return a failure. That prevented
kernel panics and such initially, but now all it achieves is creating
more confusing errors when the driver tries to submit commands to a
GuC it already knows is not there. So fix that up.
As a stop-gap and to help with debug of load failures due to invalid
GuC init params, a wedge call had been added to the inner GuC load
function. The reason being that it leaves the GuC log accessible via
debugfs. However, for an end user, simply aborting the module load is
much cleaner than wedging and trying to continue. The wedge blocks
user submissions but it seems that various bits of the driver itself
still try to submit to a dead GuC and lots of subsequent errors occur.
And with regards to developers debugging why their particular code
change is being rejected by the GuC, it is trivial to either add the
wedge back in and hack the return code to zero again or to just do a
GuC log dump to dmesg.
v2: Add support for error injection testing and drop the now redundant
wedge call.
CC: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://lore.kernel.org/r/20250909224132.536320-1-John.C.Harrison@Intel.com
FEAT_LSFE (Large System Float Extension), providing atomic floating point
memory operations, is optional from v9.5. This feature adds no new
architectural stare and we have no immediate use for it in the kernel so
simply provide a hwcap for it to support discovery by userspace.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
net_iov / freelist / etc. arrays can be quite long, make sure they're
accounted.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Returning buffers via a ring is performant and convenient, but it
becomes a problem when/if the user misconfigured the ring size and it
becomes full. Add a synchronous way to return buffers back to the page
pool via a new register opcode. It's supposed to be a reliable slow
path for refilling.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper for verifying a rqe and extracting a niov out of it. It'll
be reused in following patches.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The cache should be empty when io_pp_zc_alloc_netmems() is called,
that's promised by page pool and further checked, so there is no need to
recalculate the available space in io_zcrx_ring_refill().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use guards for rq_lock in io_zcrx_ring_refill(), makes it a tad simpler.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reduce the scope of a local var netmem in io_zcrx_ring_refill.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove ifq->lock and reuse pp_lock to protect the netdev pointer.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for reusing the lock for other purposes, rename it to
"pp_lock". As before, it can be taken deeper inside the networking stack
by page pool, and so the syscall io_uring must avoid holding it while
doing queue reconfiguration or anything that can result in immediate pp
init/destruction.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of using PAGE_SIZE for the niov size add a niov_shift field to
ifq, and patch up all important places. Copy fallback still assumes
PAGE_SIZE, so it'll be wasting some memory for now.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set struct io_zcrx_mem::sgt for umem areas as well to simplify looking
up the current sg table.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It was removed from uapi, so now it's always 0 and can be removed
together with offset handling in io_populate_area_dma().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With a common type for storing dma addresses and io_populate_area_dma(),
type-specific area mapping helpers are trivial, so open code them and
deduplicate the call to io_populate_area_dma().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_zcrx_copy_chunk() doesn't and shouldn't care from which area the
buffer is allocated, don't try to resolve the area in it but pass the
ifq to io_zcrx_alloc_fallback() and let it handle it. Also rename it for
more clarity.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a warning if io_populate_area_dma() can't fill in all net_iovs, it
should never happen.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_import_area() is responsible for importing memory and parsing
io_uring_zcrx_area_reg, so move all area reg structure checks into the
function.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't pass a pointer to a pointer where an area should be stored to
io_zcrx_create_area(), and let it handle finding the right place for a
new area. It's more straightforward and will be needed to support
multiple areas.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
page_pool_unref_and_test() tries to better follow usuall refcount
semantics, use it instead of page_pool_unref_netmem().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
memchr_inv() is more ambiguous than mem_is_zero(), so use the latter
for zero checks.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Refill queue entries are 16B structures, but because of the ring header
placement, they're 8B aligned but not naturally / 16B aligned, which
means some of them span across 2 cache lines. Push rqes to a new cache
line.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit a8bb74acd8 ("rcu: Consolidate RCU-sched update-side function definitions")
there is no difference between rcu_read_lock(), rcu_read_lock_bh() and
rcu_read_lock_sched() in terms of RCU read section and the relevant grace
period. That means that spin_lock(), which implies rcu_read_lock_sched(),
also implies rcu_read_lock().
There is no need no explicitly start a RCU read section if one has already
been started implicitly by spin_lock().
Simplify the code and remove the inner rcu_read_lock() invocation.
Cc: Waiman Long <longman@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: pengdonglin <pengdonglin@xiaomi.com>
Signed-off-by: pengdonglin <dolinux.peng@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Since commit a8bb74acd8 ("rcu: Consolidate RCU-sched update-side function definitions")
there is no difference between rcu_read_lock(), rcu_read_lock_bh() and
rcu_read_lock_sched() in terms of RCU read section and the relevant grace
period. That means that spin_lock(), which implies rcu_read_lock_sched(),
also implies rcu_read_lock().
There is no need no explicitly start a RCU read section if one has already
been started implicitly by spin_lock().
Simplify the code and remove the inner rcu_read_lock() invocation.
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: pengdonglin <pengdonglin@xiaomi.com>
Signed-off-by: pengdonglin <dolinux.peng@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
blk_validate_atomic_write_limits() ensures that any boundary fits into
and is aligned to any chunk size.
However, it should also be possible to fit the chunk size into any
boundary. That check is already made in
blk_stack_atomic_writes_boundary_head().
Relax the check in blk_validate_atomic_write_limits() by reusing (and
renaming) blk_stack_atomic_writes_boundary_head().
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Atomic writes support may not always be possible when stacking devices
which support atomic writes. Such as case is a different atomic write
boundary between stacked devices (which is not supported).
In the case that atomic writes cannot supported, the top device queue HW
limits are set to 0.
However, in blk_stack_atomic_writes_limits(), we detect that we are
stacking the first bottom device by checking the top device
atomic_write_hw_max value == 0. This get confused with the case of atomic
writes not supported, above.
Make the distinction between stacking the first bottom device and no
atomics supported by initializing stacked device atomic_write_hw_max =
UINT_MAX and checking that for stacking the first bottom device.
Fixes: d7f36dc446 ("block: Support atomic writes limits for stacked devices")
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In commit 63d092d1c1 ("block: use chunk_sectors when evaluating stacked
atomic write limits"), it was missed to use a chunk sectors limit check
in blk_stack_atomic_writes_boundary_head(), so update that function to
do the proper check.
Fixes: 63d092d1c1 ("block: use chunk_sectors when evaluating stacked atomic write limits")
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On the TUXEDO InfinityBook S Gen8, a Samsung 990 Evo NVMe leads to
a high power consumption in s2idle sleep (3.5 watts).
This patch applies 'Force No Simple Suspend' quirk to achieve a sleep with
a lower power consumption, typically around 1 watts.
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Signed-off-by: Keith Busch <kbusch@kernel.org>
Make acpi_nondev_subnode_extract() follow the usual code flow pattern
in which failure is handled at the point where it is detected.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
In certain circumstances, the ACPI handle of a data-only node may be
NULL, in which case it does not make sense to attempt to attach that
node to an ACPI namespace object, so update the code to avoid attempts
to do so.
This prevents confusing and unuseful error messages from being printed.
Also document the fact that the ACPI handle of a data-only node may be
NULL and when that happens in a code comment. In addition, make
acpi_add_nondev_subnodes() print a diagnostic message for each data-only
node with an unknown ACPI namespace scope.
Fixes: 1d52f10917 ("ACPI: property: Tie data nodes to acpi handles")
Cc: 6.0+ <stable@vger.kernel.org> # 6.0+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
In some places in the ACPI device properties handling code, it is
unclear why the code is what it is. Some assumptions are not documented
and some pieces of code are based on knowledge that is not mentioned
anywhere.
Add code comments explaining these things.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Data-only subnode links following the ACPI data subnode GUID in a _DSD
package are expected to point to named objects returning _DSD-equivalent
packages. If a reference to such an object is used in the target field
of any of those links, that object will be evaluated in place (as a
named object) and its return data will be embedded in the outer _DSD
package.
For this reason, it is not expected to see a subnode link with the
target field containing a local reference (that would mean pointing
to a device or another object that cannot be evaluated in place and
therefore cannot return a _DSD-equivalent package).
Accordingly, simplify the code parsing data-only subnode links to
simply print a message when it encounters a local reference in the
target field of one of those links.
Moreover, since acpi_nondev_subnode_data_ok() would only have one
caller after the change above, fold it into that caller.
Link: https://lore.kernel.org/linux-acpi/CAJZ5v0jVeSrDO6hrZhKgRZrH=FpGD4vNUjFD8hV9WwN9TLHjzQ@mail.gmail.com/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The ACPI handle passed to acpi_extract_properties() as the first
argument represents the ACPI namespace scope in which to look for
objects returning buffers associated with buffer properties.
For _DSD objects located immediately under ACPI devices, this handle is
the same as the handle of the device object holding the _DSD, but for
data-only subnodes it is not so.
First of all, data-only subnodes are represented by objects that
cannot hold other objects in their scopes (like control methods).
Therefore a data-only subnode handle cannot be used for completing
relative pathname segments, so the current code in
in acpi_nondev_subnode_extract() passing a data-only subnode handle
to acpi_extract_properties() is invalid.
Moreover, a data-only subnode of device A may be represented by an
object located in the scope of device B (which kind of makes sense,
for instance, if A is a B's child). In that case, the scope in
question would be the one of device B. In other words, the scope
mentioned above is the same as the scope used for subnode object
lookup in acpi_nondev_subnode_extract().
Accordingly, rearrange that function to use the same scope for the
extraction of properties and subnode object lookup.
Fixes: 103e10c69c ("ACPI: property: Add support for parsing buffer property UUID")
Cc: 6.0+ <stable@vger.kernel.org> # 6.0+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Default config for UML (x86_64) doesn't include any driver which
supports DRM_CLIENT_SELECTION, which makes drm_client_modeset disabled
(and correspondingly tests for that module are not executed too).
Enable DRM_VKMS and DRM_FBDEV_EMULATION in order to be able to run DRM
client modesetting tests.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://lore.kernel.org/r/20250821-drm-client-tests-v1-1-49e7212c744a@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Document an optional interrupt found in some controllers of BQ27xxx
series. The pin to which the interrupt is connected is called SOC_INT or
GPOUT.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Enable camera clock controller on Qualcomm SM8450 boards by default
due to a reasonable agreement of having all clock controllers enabled.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250909235547.787396-1-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable IMX577 via CCI1 on LeMans EVK Core Kit.
The LeMans EVK board does not include a camera sensor
by default, this overlay reflects the possibility of
attaching an optional camera sensor.
For this reason, the camera sensor configuration is
placed in lemans-evk-camera.dtso, rather than
modifying the base lemans-evk.dts.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Wenmeng Liu <quic_wenmliu@qualcomm.com>
Link: https://lore.kernel.org/r/20250912-camss_rb8-v6-3-c9a6c3d67392@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add documentation on how to resolve conflicts between CXL Fixed Memory
Windows, Platform Low Memory Holes, intermediate Switch and Endpoint
Decoders.
[dj]: Fixed inconsistent spacing after '.'
[dj]: Fixed subject line from Alison.
[dj]: Removed '::' before table from Bagas.
Reviewed-by: Gregory Price <gourry@gourry.net>
Signed-off-by: Fabio M. De Francesco <fabio.m.de.francesco@linux.intel.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The parameter max_hw_wzeroes_unmap_sectors in queue_limits should be
equal to max_write_zeroes_sectors if it is set to a non-zero value.
However, the stacked md drivers call md_init_stacking_limits() to
initialize this parameter to UINT_MAX but only adjust
max_write_zeroes_sectors when setting limits. Therefore, this
discrepancy triggers a value check failure in blk_validate_limits().
$ modprobe scsi_debug num_parts=2 dev_size_mb=8 lbprz=1 lbpws=1
$ mdadm --create /dev/md0 --level=0 --raid-device=2 /dev/sda1 /dev/sda2
mdadm: Defaulting to version 1.2 metadata
mdadm: RUN_ARRAY failed: Invalid argument
Fix this failure by explicitly setting max_hw_wzeroes_unmap_sectors to
max_write_zeroes_sectors. Since the linear and raid0 drivers support
write zeroes, so they can support unmap write zeroes operation if all of
the backend devices support it. However, the raid1/10/5 drivers don't
support write zeroes, so we have to set it to zero.
Fixes: 0c40d7cb5e ("block: introduce max_{hw|user}_wzeroes_unmap_sectors to queue limits")
Reported-by: John Garry <john.g.garry@oracle.com>
Closes: https://lore.kernel.org/linux-block/803a2183-a0bb-4b7a-92f1-afc5097630d2@oracle.com/
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Tested-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Li Nan <linan122@huawei.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/linux-raid/20250910111107.3247530-2-yi.zhang@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Recursing into pci_bus_release_bridge_resources() should not alter rel_type
because it makes no sense to change the release type within the recursion
call chain. A literal "whole_subtree" is passed into the recursion instead
of "rel_type" parameter which is misleading as the release type should
remain the same throughout the entire operation.
This is not a correctness issue because of the preceding if () that only
allows the recursion to happen if rel_type is "whole_subtree". Still,
replace the non-intuitive parameter with direct passing of "rel_type".
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250829131113.36754-25-ilpo.jarvinen@linux.intel.com
pci_bus_release_bridge_resources() takes type, which is converted into a
bridge window resource in pci_bridge_release_resources().
Find out the correct bridge window for resource whose assignment failed.
Pass that bridge window to pci_bus_release_bridge_resources() instead of
passing the type. When recursing to subordinate, check which bridge windows
have to be released and recurse for each.
For now, use pbus_select_window_for_type() instead of pbus_select_window()
because non-bridge window resources still have their flags reset which
destroys the type information from the struct resource. The struct
pci_dev_resource holds a copy of the flags which are used instead.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250829131113.36754-24-ilpo.jarvinen@linux.intel.com
pci_bridge_release_resources() contains a resource type hack to work
around the unsuitable __pci_setup_bridge() interface. Extract the
switch statement that picks the correct bridge window setup function
from pci_claim_bridge_resource() into pci_setup_one_bridge_window() and
use it also in pci_bridge_release_resources().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250829131113.36754-23-ilpo.jarvinen@linux.intel.com
Convert remove_dev_resources() to use pbus_select_window(). As 'available'
is not the real resources, the index has to be adjusted as only bridge
resource counterparts are present in the 'available' array.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250829131113.36754-22-ilpo.jarvinen@linux.intel.com
