The status of each mux is read during suspend and stored in the private
memory of the mux_chip.
Then the state is restored during the resume.
Reviewed-by: Andrew Davis <afd@ti.com>
Signed-off-by: Thomas Richard (TI.com) <thomas.richard@bootlin.com>
Link: https://patch.msgid.link/20251013-mux-mmio-resume-support-v5-1-de9467ceb2b2@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add struct acrn_mmio_dev_res before struct acrn_mmio_dev.
The former is used in the latter and breaking them up provides
better kernel-doc documentation for the struct members.
Suggested-by: Fei Li <fei1.li@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Fei Li <fei1.li@intel.com>
Link: https://patch.msgid.link/20251028040409.868254-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The primary consumer is link_path_walk(), calling walk_component() every
time which in turn calls step_into().
Inlining these saves overhead of 2 function calls per path component,
along with allowing the compiler to do better job optimizing them in place.
step_into() had absolutely atrocious assembly to facilitate the
slowpath. In order to lessen the burden at the callsite all the hard
work is moved into step_into_slowpath() and instead an inline-able
fastpath is implemented for rcu-walk.
The new fastpath is a stripped down step_into() RCU handling with a
d_managed() check from handle_mounts().
Benchmarked as follows on Sapphire Rapids:
1. the "before" was a kernel with not-yet-merged optimizations (notably
elision of calls to security_inode_permission() and marking ext4
inodes as not having acls as applicable)
2. "after" is the same + the prep patch + this patch
3. benchmark consists of issuing 205 calls to access(2) in a loop with
pathnames lifted out of gcc and the linker building real code, most
of which have several path components and 118 of which fail with
-ENOENT.
Result in terms of ops/s:
before: 21619
after: 22536 (+4%)
profile before:
20.25% [kernel] [k] __d_lookup_rcu
10.54% [kernel] [k] link_path_walk
10.22% [kernel] [k] entry_SYSCALL_64
6.50% libc.so.6 [.] __GI___access
6.35% [kernel] [k] strncpy_from_user
4.87% [kernel] [k] step_into
3.68% [kernel] [k] kmem_cache_alloc_noprof
2.88% [kernel] [k] walk_component
2.86% [kernel] [k] kmem_cache_free
2.14% [kernel] [k] set_root
2.08% [kernel] [k] lookup_fast
after:
23.38% [kernel] [k] __d_lookup_rcu
11.27% [kernel] [k] entry_SYSCALL_64
10.89% [kernel] [k] link_path_walk
7.00% libc.so.6 [.] __GI___access
6.88% [kernel] [k] strncpy_from_user
3.50% [kernel] [k] kmem_cache_alloc_noprof
2.01% [kernel] [k] kmem_cache_free
2.00% [kernel] [k] set_root
1.99% [kernel] [k] lookup_fast
1.81% [kernel] [k] do_syscall_64
1.69% [kernel] [k] entry_SYSCALL_64_safe_stack
While walk_component() and step_into() of course disappear from the
profile, the link_path_walk() barely gets more overhead despite the
inlining thanks to the fast path added and while completing more walks
per second.
I did not investigate why overhead grew a lot on __d_lookup_rcu().
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://patch.msgid.link/20251120003803.2979978-2-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Symlink handling is already marked as unlikely and pushing out some of
it into pick_link() reduces register spillage on entry to step_into()
with gcc 14.2.
The compiler needed additional convincing that handle_mounts() is
unlikely to fail.
At the same time neither clang nor gcc could be convinced to tail-call
into pick_link().
While pick_link() takes an address of stack-based object as an argument
(which definitely prevents the optimization), splitting it into separate
<dentry, mount> tuple did not help. The issue persists even when
compiled without stack protector. As such nothing was done about this
for the time being to not grow the diff.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://patch.msgid.link/20251120003803.2979978-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Christoph Hellwig <hch@lst.de> says:
[Fix] the layering bypass in btrfs when updating timestamps on device
files for devices removed from btrfs usage, and FMODE_NOCMTIME handling
in the VFS now that nfsd started using it. Note that I'm still not sure
that nfsd usage is fully correct for all file systems, as only XFS
explicitly supports FMODE_NOCMTIME, but at least the generic code does
the right thing now.
* patches from https://patch.msgid.link/20251120064859.2911749-1-hch@lst.de:
orangefs: use inode_update_timestamps directly
btrfs: fix the comment on btrfs_update_time
btrfs: use vfs_utimes to update file timestamps
fs: export vfs_utimes
fs: lift the FMODE_NOCMTIME check into file_update_time_flags
fs: refactor file timestamp update logic
Link: https://patch.msgid.link/20251120064859.2911749-1-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
Orangefs has no i_version handling and __orangefs_setattr already
explicitly marks the inode dirty. So instead of the using
the flags return value from generic_update_time, just call the
lower level inode_update_timestamps helper directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251120064859.2911749-7-hch@lst.de
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Since commit e41f941a23 ("Btrfs: move over to use ->update_time") this
is not a copy of the high-level file_update_time helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251120064859.2911749-6-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
Btrfs updates the device node timestamps for block device special files
when it stop using the device.
Commit 8f96a5bfa1 ("btrfs: update the bdev time directly when closing")
switch that update from the correct layering to directly call the
low-level helper on the bdev inode. This is wrong and got fixed in
commit 54fde91f52 ("btrfs: update device path inode time instead of
bd_inode") by updating the file system inode instead of the bdev inode,
but this kept the incorrect bypassing of the VFS interfaces and file
system ->update_times method. Fix this by using the propet vfs_utimes
interface.
Fixes: 8f96a5bfa1 ("btrfs: update the bdev time directly when closing")
Fixes: 54fde91f52 ("btrfs: update device path inode time instead of bd_inode")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251120064859.2911749-5-hch@lst.de
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This will be used to replace an incorrect direct call into
generic_update_time in btrfs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251120064859.2911749-4-hch@lst.de
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
FMODE_NOCMTIME used to be just a hack for the legacy XFS handle-based
"invisible I/O", but commit e5e9b24ab8 ("nfsd: freeze c/mtime updates
with outstanding WRITE_ATTRS delegation") started using it from
generic callers.
I'm not sure other file systems are actually read for this in general,
so the above commit should get a closer look, but for it to make any
sense, file_update_time needs to respect the flag.
Lift the check from file_modified_flags to file_update_time so that
users of file_update_time inherit the behavior and so that all the
checks are done in one place.
Fixes: e5e9b24ab8 ("nfsd: freeze c/mtime updates with outstanding WRITE_ATTRS delegation")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251120064859.2911749-3-hch@lst.de
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Currently the two high-level APIs use two helper functions to implement
almost all of the logic. Refactor the two helpers and the common logic
into a new file_update_time_flags routine that gets the iocb flags or
0 in case of file_update_time passed so that the entire logic is
contained in a single function and can be easily understood and modified.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251120064859.2911749-2-hch@lst.de
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
wait_for_completion_timeout() returns the remaining jiffies
(at least 1) on success or 0 on timeout, but never negative
error codes. The current code incorrectly checks for negative
values, causing timeouts to be ignored and treated as success.
Check for a zero return value to correctly identify and
handle timeout events.
Fixes: 0cf7befa3e ("greybus: gb-beagleplay: Add firmware upload API")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251121064027.571-1-vulab@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251112152710.207577-1-marco.crivellari@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
typedefs are unnecessary here. They rather obfuscate the code than help.
So drop them and use the types directly.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251119091949.825958-7-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PRINTK_ERROR() + KERN_ERR_MWAVE are just wrappers around printk() with
a prefix. Instead, pr_fmt() can be used. Drop the former and use the
latter.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251119091949.825958-6-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The printk tracing makes the code hard to follow for no good benefit.
Everyone can use dynamic tracing and/or kprobes.
Drop this unreadable bloatware too.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251119091949.825958-5-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
file_operations::{read/write/open/release} need not be defined. The core
code return proper values already (the same as the being removed ones).
So there is no need to preserve these just for tracing via printk.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251119091949.825958-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In mwave, a lot of code depends on the MWAVE_FUTZ_WITH_OTHER_DEVICES
macro. That can be defined in Makefile to compile this in.
1) The code is completely unreadable.
2) Recompiling the kernel to have this untested code compiled in is not
a good idea.
Drop all this.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251119091949.825958-3-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In mwave, there is a lot of commented code for a long time. Drop it.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251119091949.825958-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document the RSPI controller on the Renesas RZ/V2N SoC. The block is
compatible with the RSPI implementation found on the RZ/V2H(P) family.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251126131619.136605-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The use of firmware_loader is an implementation detail of drivers rather
than a dependency. FW_LOADER is typically selected rather than depended
on; the Rust abstractions should do the same thing.
Fixes: de6582833d ("rust: add firmware abstractions")
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20251106-b4-select-rust-fw-v3-1-771172257755@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
memset_io() writes memory byte by byte with __raw_writeb() on the arm
platform if the size is word. but XCVR data RAM memory can't be accessed
with byte address, so with memset_io() the channel status control memory
is not really cleared, use writel_relaxed() instead.
Fixes: 2856448686 ("ASoC: fsl_xcvr: Add XCVR ASoC CPU DAI driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20251126064509.1900974-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The custom FIELD_OFFSET macro is no longer used in the driver (replaced
by standard offsetof). Remove the definition.
Signed-off-by: Navaneeth K <knavaneeth786@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20251125112059.16913-6-knavaneeth786@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace usage of the custom FIELD_OFFSET macro with the standard
offsetof() macro in rtw_mlme_ext.c. This improves code readability
and uses the kernel's standard mechanism.
Signed-off-by: Navaneeth K <knavaneeth786@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20251125112059.16913-5-knavaneeth786@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove obsolete commented-out code that references unsupported chip
variants (ODM_RTL8723A, ODM_RTL8188E). This code has been dead since
the driver was added to staging.
Also fix the resulting formatting by removing the unnecessary outer
parentheses and moving the inline comment to its own line.
Signed-off-by: Navaneeth K <knavaneeth786@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20251125112059.16913-4-knavaneeth786@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace usage of the custom FIELD_OFFSET macro with the standard
offsetof() macro in ioctl_cfg80211.c. This improves code readability
and uses the kernel's standard mechanism.
Also include <linux/stddef.h> in basic_types.h to ensure offsetof()
is available for this and future conversions.
Signed-off-by: Navaneeth K <knavaneeth786@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20251125112059.16913-3-knavaneeth786@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The RGTRY_OFT, RGTRY_SZ, BSSID_OFT, and BSSID_SZ macros are defined but
never used anywhere in the driver. Remove these dead macro definitions
to clean up the code.
Signed-off-by: Navaneeth K <knavaneeth786@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20251125112059.16913-2-knavaneeth786@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The COMEDI standalone 8255 driver can be used to configure a COMEDI
device consisting of one of more subdevices, each using an 8255 digital
I/O chip mapped to a range of port I/O addresses. The base port I/O
address of each chip is specified in an array of integer option values
by the `COMEDI_DEVCONFIG` ioctl.
When support for multiple 8255 subdevices per device was added in the
out-of-tree comedi 0.7.27 back in 1999, if any port I/O region could not
be requested, then the corresponding subdevice was set to be an "unused"
subdevice, and the COMEDI device would still be set-up OK as long as
those were the only types of errors. That has persisted until the
present day, but seems a bit odd in retrospect. All the other COMEDI
drivers that use port I/O or memory regions will fail to set up the
device if any region cannot be requested. It seems unlikely that the
sys admin would deliberately choose a port that cannot be requested just
to leave a gap in the device's usable subdevice numbers, and failing to
set-up the device will provide a more noticeable indication that
something hasn't been set-up correctly, so change the driver to fail to
set up the device if any of the port I/O regions cannot be requested.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20251028112833.15033-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "comedi_bond" driver allows a composite COMEDI device to be built up
from the subdevices of other COMEDI devices, although it currently only
supports digital I/O subdevices. Although it checks that it is not
trying to bind to itself, it is possible to end up with a cycle of
"comedi_bond" devices bound to each other. For example:
1. Configure /dev/comedi0 to use some COMEDI hardware device with
digital I/O subdevices, but not a "comedi_bond" device.
2. Configure /dev/comedi1 as a "comedi_bond" device bound to
/dev/comedi0.
3. Unconfigure /dev/comedi0 and reconfigure it as a "comedi_bond" device
bound to /dev/comedi1.
Now we have /dev/comedi0 and /dev/comedi1 bound in a cycle. When an
operation is performed on the digital I/O subdevice of /dev/comedi0 for
example, it will try and perform the operation on /dev/comedi1, which
will try and perform the operation on /dev/comedi0. The task will end
up deadlocked trying to lock /dev/comedi0's mutex which it has already
locked.
I discovered that possibility while investigating fix sysbot crash
https://syzkaller.appspot.com/bug?extid=4a6138c17a47937dcea1 ("possible
deadlock in comedi_do_insn"), but I think that report may be a false
positive.
To avoid that, replace the calls to `comedi_open()` and `comedi_close()`
in "kcomedilib" with calls to `comedi_open_from()` and
`comedi_close_from()`. These take an extra parameter that indicates the
COMEDI minor device number from which the open or close is being
performed. `comedi_open_from()` will refuse to open the device if doing
so would result in a cycle. The cycle detection depends on the extra
parameter having the correct value for this device and also for existing
devices in the chain.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20251027153748.4569-3-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add `comedi_open_from(path, from)` and `comedi_close_from(dev, from)` as
variants of the existing `comedi_from(path)` and `comedi_close(dev)`.
The additional `from` parameter is a minor device number that tells the
function that the COMEDI device is being opened or closed from another
COMEDI device if the value is in the range [0,
`COMEDI_NUM_BOARD_MINORS`-1]. In that case the function will refuse to
open the device if it would lead to a chain of devices opening each
other. (It will also impose a limit on the number of simultaneous opens
from one device to another because we need to count those.)
The new functions are intended to be used by the "comedi_bond" driver,
which is the only driver that uses the existing `comedi_open()` and
`comedi_close()` functions. The new functions will be used to avoid
some possible deadlock situations.
Replace the existing, exported `comedi_open()` and `comedi_close()`
functions with inline wrapper functions that call the newly exported
`comedi_open_from()` and `comedi_close_from()` functions.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20251027153748.4569-2-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For interrupts from badly behaved hardware (as emulated by Syzbot), it
is possible for the Comedi core functions that manage the progress of
asynchronous data acquisition to be called from driver ISRs while no
asynchronous command has been set up, which can cause problems such as
invalid pointer dereferencing or dividing by zero.
Change those functions in the Comedi core to use this pattern: if
`comedi_get_is_subdevice_running(s)` returns `true` then call a safe
version of the function with the same name prefixed with an underscore,
followed by a call to `comedi_put_is_subdevice_running(s)`, otherwise
take some default action.
`comedi_get_is_subdevice_running(s)` returning `true` ensures that the
details of the asynchronous command will not be destroyed before the
matching call to `comedi_put_is_subdevice_running(s)`.
Replace calls to those functions from elsewhere in the Comedi core with
calls to the safe versions of the functions.
The modified functions are: `comedi_buf_read_alloc()`,
`comedi_buf_read_free()`, `comedi_buf_read_n_available()`,
`comedi_buf_read_samples()`, `comedi_buf_write_alloc()`,
`comedi_buf_write_free()`, `comedi_buf_write_samples()`,
`comedi_bytes_per_scan()`, `comedi_event()`, `comedi_handle_events()`,
`comedi_inc_scan_progress()`, `comedi_nsamples_left()`,
`comedi_nscans_left()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20251023133001.8439-3-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For interrupts from badly behaved hardware (as emulated by Syzbot), it
is possible for the Comedi core functions that manage the progress of
asynchronous data acquisition to be called from driver ISRs while no
asynchronous command has been set up, which can cause problems such as
invalid pointer dereferencing or dividing by zero.
To help protect against that, introduce new functions to maintain a
reference counter for asynchronous commands that are being set up.
`comedi_get_is_subdevice_running(s)` will check if a command has been
set up on a subdevice and is still marked as running, and if so will
increment the reference counter and return `true`, otherwise it will
return `false` without modifying the reference counter.
`comedi_put_is_subdevice_running(s)` will decrement the reference
counter and set a completion event when decremented to 0.
Change the `do_cmd_ioctl()` function (responsible for setting up the
asynchronous command) to reinitialize the completion event and set the
reference counter to 1 before it marks the subdevice as running. Change
the `do_become_nonbusy()` function (responsible for destroying a
completed command) to call `comedi_put_is_subdevice_running(s)` and wait
for the completion event after marking the subdevice as not running.
Because the subdevice normally gets marked as not running before the
call to `do_become_nonbusy()` (and may also be called when the Comedi
device is being detached from the low-level driver), add a new flag
`COMEDI_SRF_BUSY` to the set of subdevice run-flags that indicates that
an asynchronous command was set up and will need to be destroyed. This
flag is set by `do_cmd_ioctl()` and cleared and checked by
`do_become_nonbusy()`.
Subsequent patches will change the Comedi core functions that are called
from low-level drivers for asynchrous command handling to make use of
the `comedi_get_is_subdevice_running()` and
`comedi_put_is_subdevice_running()` functions, and will modify the ISRs
of some of these low-level drivers if they dereference the subdevice's
`async` pointer directly.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20251023133001.8439-2-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Syzbot identified an issue [1] in pcl818_ai_cancel(), which stems from
the fact that in case of early device detach via pcl818_detach(),
subdevice dev->read_subdev may not have initialized its pointer to
&struct comedi_async as intended. Thus, any such dereferencing of
&s->async->cmd will lead to general protection fault and kernel crash.
Mitigate this problem by removing a call to pcl818_ai_cancel() from
pcl818_detach() altogether. This way, if the subdevice setups its
support for async commands, everything async-related will be
handled via subdevice's own ->cancel() function in
comedi_device_detach_locked() even before pcl818_detach(). If no
support for asynchronous commands is provided, there is no need
to cancel anything either.
[1] Syzbot crash:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
CPU: 1 UID: 0 PID: 6050 Comm: syz.0.18 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
RIP: 0010:pcl818_ai_cancel+0x69/0x3f0 drivers/comedi/drivers/pcl818.c:762
...
Call Trace:
<TASK>
pcl818_detach+0x66/0xd0 drivers/comedi/drivers/pcl818.c:1115
comedi_device_detach_locked+0x178/0x750 drivers/comedi/drivers.c:207
do_devconfig_ioctl drivers/comedi/comedi_fops.c:848 [inline]
comedi_unlocked_ioctl+0xcde/0x1020 drivers/comedi/comedi_fops.c:2178
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
...
Reported-by: syzbot+fce5d9d5bd067d6fbe9b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=fce5d9d5bd067d6fbe9b
Fixes: 00aba6e7b5 ("staging: comedi: pcl818: remove 'neverending_ai' from private data")
Cc: stable <stable@kernel.org>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20251023141457.398685-1-n.zhandarovich@fintech.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Syzbot identified an issue [1] in multiq3_attach() that induces a
task timeout due to open() or COMEDI_DEVCONFIG ioctl operations,
specifically, in the case of multiq3 driver.
This problem arose when syzkaller managed to craft weird configuration
options used to specify the number of channels in encoder subdevice.
If a particularly great number is passed to s->n_chan in
multiq3_attach() via it->options[2], then multiple calls to
multiq3_encoder_reset() at the end of driver-specific attach() method
will be running for minutes, thus blocking tasks and affected devices
as well.
While this issue is most likely not too dangerous for real-life
devices, it still makes sense to sanitize configuration inputs. Enable
a sensible limit on the number of encoder chips (4 chips max, each
with 2 channels) to stop this behaviour from manifesting.
[1] Syzbot crash:
INFO: task syz.2.19:6067 blocked for more than 143 seconds.
...
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5254 [inline]
__schedule+0x17c4/0x4d60 kernel/sched/core.c:6862
__schedule_loop kernel/sched/core.c:6944 [inline]
schedule+0x165/0x360 kernel/sched/core.c:6959
schedule_preempt_disabled+0x13/0x30 kernel/sched/core.c:7016
__mutex_lock_common kernel/locking/mutex.c:676 [inline]
__mutex_lock+0x7e6/0x1350 kernel/locking/mutex.c:760
comedi_open+0xc0/0x590 drivers/comedi/comedi_fops.c:2868
chrdev_open+0x4cc/0x5e0 fs/char_dev.c:414
do_dentry_open+0x953/0x13f0 fs/open.c:965
vfs_open+0x3b/0x340 fs/open.c:1097
...
Reported-by: syzbot+7811bb68a317954a0347@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7811bb68a317954a0347
Fixes: 77e01cdbad ("Staging: comedi: add multiq3 driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20251023132205.395753-1-n.zhandarovich@fintech.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ALSA SoC driver for Tegra runs also on SoCs without the Tegra20 APB DMA
controller (e.g. Tegra234).
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Link: https://patch.msgid.link/20251126112926.4126757-1-flavra@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After commit b77b4a4815 ("gfs2: Rework freeze / thaw logic"),
the freeze error handling is broken because gfs2_do_thaw()
overwrites the 'error' variable, causing incorrect processing
of the original freeze error.
Fix this by calling gfs2_do_thaw() when gfs2_lock_fs_check_clean()
fails but ignoring its return value to preserve the original
freeze error for proper reporting.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b77b4a4815 ("gfs2: Rework freeze / thaw logic")
Cc: stable@vger.kernel.org # v6.5+
Signed-off-by: Alexey Velichayshiy <a.velichayshiy@ispras.ru>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Syzbot identified an issue [1] that crashes kernel, seemingly due to
unexistent callback dev->get_valid_routes(). By all means, this should
not occur as said callback must always be set to
get_zero_valid_routes() in __comedi_device_postconfig().
As the crash seems to appear exclusively in i386 kernels, at least,
judging from [1] reports, the blame lies with compat versions
of standard IOCTL handlers. Several of them are modified and
do not use comedi_unlocked_ioctl(). While functionality of these
ioctls essentially copy their original versions, they do not
have required sanity check for device's attached status. This,
in turn, leads to a possibility of calling select IOCTLs on a
device that has not been properly setup, even via COMEDI_DEVCONFIG.
Doing so on unconfigured devices means that several crucial steps
are missed, for instance, specifying dev->get_valid_routes()
callback.
Fix this somewhat crudely by ensuring device's attached status before
performing any ioctls, improving logic consistency between modern
and compat functions.
[1] Syzbot report:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
CR2: ffffffffffffffd6 CR3: 000000006c717000 CR4: 0000000000352ef0
Call Trace:
<TASK>
get_valid_routes drivers/comedi/comedi_fops.c:1322 [inline]
parse_insn+0x78c/0x1970 drivers/comedi/comedi_fops.c:1401
do_insnlist_ioctl+0x272/0x700 drivers/comedi/comedi_fops.c:1594
compat_insnlist drivers/comedi/comedi_fops.c:3208 [inline]
comedi_compat_ioctl+0x810/0x990 drivers/comedi/comedi_fops.c:3273
__do_compat_sys_ioctl fs/ioctl.c:695 [inline]
__se_compat_sys_ioctl fs/ioctl.c:638 [inline]
__ia32_compat_sys_ioctl+0x242/0x370 fs/ioctl.c:638
do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline]
...
Reported-by: syzbot+ab8008c24e84adee93ff@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ab8008c24e84adee93ff
Fixes: 3fbfd2223a ("comedi: get rid of compat_alloc_user_space() mess in COMEDI_CHANINFO compat")
Cc: stable <stable@kernel.org>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://patch.msgid.link/20251023132234.395794-1-n.zhandarovich@fintech.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Comedi low-level driver "c6xdigio" seems to be for a parallel port
connected device. When the Comedi core calls the driver's Comedi
"attach" handler `c6xdigio_attach()` to configure a Comedi to use this
driver, it tries to enable the parallel port PNP resources by
registering a PNP driver with `pnp_register_driver()`, but ignores the
return value. (The `struct pnp_driver` it uses has only the `name` and
`id_table` members filled in.) The driver's Comedi "detach" handler
`c6xdigio_detach()` unconditionally unregisters the PNP driver with
`pnp_unregister_driver()`.
It is possible for `c6xdigio_attach()` to return an error before it
calls `pnp_register_driver()` and it is possible for the call to
`pnp_register_driver()` to return an error (that is ignored). In both
cases, the driver should not be calling `pnp_unregister_driver()` as it
does in `c6xdigio_detach()`. (Note that `c6xdigio_detach()` will be
called by the Comedi core if `c6xdigio_attach()` returns an error, or if
the Comedi core decides to detach the Comedi device from the driver for
some other reason.)
The unconditional call to `pnp_unregister_driver()` without a previous
successful call to `pnp_register_driver()` will cause
`driver_unregister()` to issue a warning "Unexpected driver
unregister!". This was detected by Syzbot [1].
Also, the PNP driver registration and unregistration should be done at
module init and exit time, respectively, not when attaching or detaching
Comedi devices to the driver. (There might be more than one Comedi
device being attached to the driver, although that is unlikely.)
Change the driver to do the PNP driver registration at module init time,
and the unregistration at module exit time. Since `c6xdigio_detach()`
now only calls `comedi_legacy_detach()`, remove the function and change
the Comedi driver "detach" handler to `comedi_legacy_detach`.
-------------------------------------------
[1] Syzbot sample crash report:
Unexpected driver unregister!
WARNING: CPU: 0 PID: 5970 at drivers/base/driver.c:273 driver_unregister drivers/base/driver.c:273 [inline]
WARNING: CPU: 0 PID: 5970 at drivers/base/driver.c:273 driver_unregister+0x90/0xb0 drivers/base/driver.c:270
Modules linked in:
CPU: 0 UID: 0 PID: 5970 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/02/2025
RIP: 0010:driver_unregister drivers/base/driver.c:273 [inline]
RIP: 0010:driver_unregister+0x90/0xb0 drivers/base/driver.c:270
Code: 48 89 ef e8 c2 e6 82 fc 48 89 df e8 3a 93 ff ff 5b 5d e9 c3 6d d9 fb e8 be 6d d9 fb 90 48 c7 c7 e0 f8 1f 8c e8 51 a2 97 fb 90 <0f> 0b 90 90 5b 5d e9 a5 6d d9 fb e8 e0 f4 41 fc eb 94 e8 d9 f4 41
RSP: 0018:ffffc9000373f9a0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffffff8ff24720 RCX: ffffffff817b6ee8
RDX: ffff88807c932480 RSI: ffffffff817b6ef5 RDI: 0000000000000001
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffffffff8ff24660
R13: dffffc0000000000 R14: 0000000000000000 R15: ffff88814cca0000
FS: 000055556dab1500(0000) GS:ffff8881249d9000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f77f285cd0 CR3: 000000007d871000 CR4: 00000000003526f0
Call Trace:
<TASK>
comedi_device_detach_locked+0x12f/0xa50 drivers/comedi/drivers.c:207
comedi_device_detach+0x67/0xb0 drivers/comedi/drivers.c:215
comedi_device_attach+0x43d/0x900 drivers/comedi/drivers.c:1011
do_devconfig_ioctl+0x1b1/0x710 drivers/comedi/comedi_fops.c:872
comedi_unlocked_ioctl+0x165d/0x2f00 drivers/comedi/comedi_fops.c:2178
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0xfa0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fc05798eec9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffcf8184238 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fc057be5fa0 RCX: 00007fc05798eec9
RDX: 0000200000000080 RSI: 0000000040946400 RDI: 0000000000000003
RBP: 00007fc057a11f91 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fc057be5fa0 R14: 00007fc057be5fa0 R15: 0000000000000003
</TASK>
-------------------------------------------
Reported-by: syzbot+6616bba359cec7a1def1@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6616bba359cec7a1def1
Fixes: 2c89e159cd ("Staging: comedi: add c6xdigio driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20251023123141.6537-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function new_inode() returns a new inode with inode->i_mapping->gfp_mask
set to GFP_HIGHUSER_MOVABLE. This value includes the __GFP_FS flag, so
allocations in that address space can recurse into filesystem memory
reclaim. We don't want that to happen because it can consume a
significant amount of stack memory.
Worse than that is that it can also deadlock: for example, in several
places, gfs2_unstuff_dinode() is called inside filesystem transactions.
This calls filemap_grab_folio(), which can allocate a new folio, which
can trigger memory reclaim. If memory reclaim recurses into the
filesystem and starts another transaction, a deadlock will ensue.
To fix these kinds of problems, prevent memory reclaim from recursing
into filesystem code by making sure that the gfp_mask of inode address
spaces doesn't include __GFP_FS.
The "meta" and resource group address spaces were already using GFP_NOFS
as their gfp_mask (which doesn't include __GFP_FS). The default value
of GFP_HIGHUSER_MOVABLE is less restrictive than GFP_NOFS, though. To
avoid being overly limiting, use the default value and only knock off
the __GFP_FS flag. I'm not sure if this will actually make a
difference, but it also shouldn't hurt.
This patch is loosely based on commit ad22c7a043 ("xfs: prevent stack
overflows from page cache allocation").
Fixes xfstest generic/273.
Fixes: dc0b943523 ("gfs: Don't use GFP_NOFS in gfs2_unstuff_dinode")
Reviewed-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
There hasn't been any substantive work on the ocxl driver since 2020, and
all patches since then have been minor fixes or part of treewide or
arch-wide changes. Frederic and I are no longer spending much time on this
driver.
Downgrade the status of the ocxl driver to Odd Fixes, to reflect the
current reality.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Link: https://patch.msgid.link/20251120-ocxl-odd-fixes-v1-1-8b766f114621@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mei_register() fails to release the device reference in error paths
after device_initialize(). During normal device registration, the
reference is properly handled through mei_deregister() which calls
device_destroy(). However, in error handling paths (such as cdev_alloc
failure, cdev_add failure, etc.), missing put_device() calls cause
reference count leaks, preventing the device's release function
(mei_device_release) from being called and resulting in memory leaks
of mei_device.
Found by code review.
Cc: stable <stable@kernel.org>
Fixes: 7704e6be4e ("mei: hook mei_device on class device")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Acked-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20251104020133.5017-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
INTEL_MEI_GSC depends on either i915 or Xe
and can be present when either of above is present.
Cc: stable <stable@kernel.org>
Fixes: 87a4c85d3a ("drm/xe/gsc: add gsc device support")
Tested-by: Baoli Zhang <baoli.zhang@intel.com>
Signed-off-by: Junxiao Chang <junxiao.chang@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20251109153533.3179787-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20251027114118.390775-1-sakari.ailus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This configuration was missing from the initial commit.
Found by Jiri Benc <jbenc@redhat.com>
Fixes: c0a3873b99 ("ASoC: nau8325: new driver")
Cc: Seven Lee <wtli@nuvoton.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20251126091759.2490019-3-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20251126091759.2490019-2-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver runs also on Tegra SoCs without a Tegra20 APB DMA controller
(e.g. Tegra234).
Remove the Kconfig dependency on TEGRA20_APB_DMA; in addition, amend the
help text to reflect the fact that this driver works on SoCs different from
Tegra114.
Fixes: bb9667d818 ("arm64: tegra: Add SPI device tree nodes for Tegra234")
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Link: https://patch.msgid.link/20251126095027.4102004-1-flavra@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The previous patches in this series illustrate why the List::remove
method is really dangerous. I think the real takeaway here is to replace
the linked lists with a different data structure without this unsafe
footgun, but for now we fix the bugs and add a warning to the docs.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://patch.msgid.link/20251111-binder-fix-list-remove-v1-3-8ed14a0da63d@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
