The Texas Instruments PCM1754[1] is a simple stereo DAC without any
digital
management interface but soft mute, PCM input format and 44.1 kHz
digital de-emphasis can be configured via strapping pins. Only soft mute
and PCM input format selection is currently exposed via optional GPIOs
in the driver.
[1]: https://www.ti.com/product/PCM1754
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Co-developed-by: Stefan Kerkmann <s.kerkmann@pengutronix.de>
Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de>
Link: https://patch.msgid.link/20250910-v6-12-topic-pcm1754-v2-2-0917dbe73c65@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The Texas Instruments PCM1754 is a simple stereo DAC without any digital
management interface but soft mute, PCM input format and 44.1 kHz
digital de-emphasis can be configured via strapping pins. Only soft mute
and PCM input format selection is currently exposed via optional GPIOs
in the driver.
Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250910-v6-12-topic-pcm1754-v2-1-0917dbe73c65@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
GuC has an interface to set a power profile for the SLPC algorithm.
Base mode is default and ensures a balanced performance, power_saving
mode has conservative up/down thresholds and is suitable for use with
apps that typically need to be power efficient. This will result in
lower GT frequencies, thus consuming lower power.
Selected power profile will be displayed in this format:
$ cat power_profile
[base] power_saving
$ echo power_saving > power_profile
$ cat power_profile
base [power_saving]
v2: Address review comments (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250903232120.390190-1-vinay.belgaumkar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Merge a hibernation regression fix and an fix related to energy model
management for 6.17-rc6
* pm-sleep:
PM: hibernate: Restrict GFP mask in hibernation_snapshot()
* pm-em:
PM: EM: Add function for registering a PD without capacity update
Add a Rust driver for ARM Mali CSF-based GPUs. It is a port of Panthor
and therefore exposes Panthor's uAPI and name to userspace, and the
product of a joint effort between Collabora, Arm and Google engineers.
The aim is to incrementally develop Tyr with the abstractions that are
currently available until it is consider to be in parity with Panthor
feature-wise.
The development of Tyr itself started in January, after a few failed
attempts of converting Panthor piecewise through a mix of Rust and C
code. There is a downstream branch that's much further ahead in terms of
capabilities than this initial patch.
The downstream code is capable of booting the MCU, doing sync VM_BINDS
through the work-in-progress GPUVM abstraction and also doing (trivial)
submits through Asahi's drm_scheduler and dma_fence abstractions. So
basically, most of what one would expect a modern GPU driver to do,
except for power management and some other very important adjacent
pieces. It is not at the point where submits can correctly deal with
dependencies, or at the point where it can rotate access to the GPU
hardware fairly through a software scheduler, but that is simply a
matter of writing more code.
This first patch, however, only implements a subset of the current
features available downstream, as the rest is not implementable without
pulling in even more abstractions. In particular, a lot of things depend
on properly mapping memory on a given VA range, which itself depends on
the GPUVM abstraction that is currently work-in-progress. For this
reason, we still cannot boot the MCU and thus, cannot do much for the
moment.
This constitutes a change in the overall strategy that we have been
using to develop Tyr so far. By submitting small parts of the driver
upstream iteratively, we aim to:
a) evolve together with Nova and rvkms, hopefully reducing regressions
due to upstream changes (that may break us because we were not there, in
the first place)
b) prove any work-in-progress abstractions by having them run on a real
driver and hardware and,
c) provide a reason to work on and review said abstractions by providing
a user, which would be tyr itself.
Despite its limited feature-set, we offer IGT tests. It is only tested
on the rk3588, so any other SoC is probably not going to work at all for
now.
The skeleton is basically taken from Nova and also
rust_platform_driver.rs.
Lastly, the name "Tyr" is inspired by Norse mythology, reflecting ARM's
tradition of naming their GPUs after Nordic mythological figures and
places.
Co-developed-by: Beata Michalska <beata.michalska@arm.com>
Signed-off-by: Beata Michalska <beata.michalska@arm.com>
Co-developed-by: Carsten Haitzler <carsten.haitzler@foss.arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@foss.arm.com>
Co-developed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://www.collabora.com/news-and-blog/news-and-events/introducing-tyr-a-new-rust-drm-driver.html
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
[aliceryhl: minor Kconfig update on apply]
[aliceryhl: s/drm::device::/drm::/]
Link: https://lore.kernel.org/r/20250910-tyr-v3-1-dba3bc2ae623@collabora.com
Co-developed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
1. Correct missing interrupts in IMX 1-Wire Devicetree bindings.
2. Drop old, dead code from Matrox driver.
-----BEGIN PGP SIGNATURE-----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=V4Gk
-----END PGP SIGNATURE-----
Merge tag 'w1-drv-6.18' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1 into char-misc-next
Krzysztof writes:
1-Wire bus drivers for v6.18
1. Correct missing interrupts in IMX 1-Wire Devicetree bindings.
2. Drop old, dead code from Matrox driver.
* tag 'w1-drv-6.18' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1:
w1: matrox: Remove some deadcode in matrox_w1_remove()
dt-bindings: w1: imx: Add an entry for the interrupts property
mc13xxx_irq_ack() got deprecated and became dead code with commit
10f9edaeaa ("mfd: mc13xxx: Use regmap irq framework for interrupts").
It should be safe to remove it now.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Link: https://lore.kernel.org/r/20250811064358.1659-1-akurz@blala.de
Signed-off-by: Lee Jones <lee@kernel.org>
The recent changes to genpd makes a genpd OF provider that is powered-on at
initialization to stay powered-on, until the ->sync_state() callback is
invoked for it.
This may not happen at all, if we wait for a consumer device to be probed,
leading to wasting energy. There are ways to enforce the ->sync_state()
callback to be invoked, through sysfs or via the probe-defer-timeout, but
none of them in its current form are a good fit for rmobile-sysc PM
domains.
Let's therefore opt-out from this behaviour of genpd for now, by using the
GENPD_FLAG_NO_STAY_ON.
Link: https://lore.kernel.org/all/20250701114733.636510-1-ulf.hansson@linaro.org/
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 0e789b491b ("pmdomain: core: Leave powered-on genpds on until sync_state")
Fixes: 13a4b7fb62 ("pmdomain: core: Leave powered-on genpds on until late_initcall_sync")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The recent changes to genpd makes a genpd OF provider that is powered-on at
initialization to stay powered-on, until the ->sync_state() callback is
invoked for it.
This may not happen at all, if we wait for a consumer device to be probed,
leading to wasting energy. There are ways to enforce the ->sync_state()
callback to be invoked, through sysfs or via the probe-defer-timeout, but
none of them in its current form are a good fit for rcar-gen4-sysc PM
domains.
Let's therefore opt-out from this behaviour of genpd for now, by using the
GENPD_FLAG_NO_STAY_ON.
Link: https://lore.kernel.org/all/20250701114733.636510-1-ulf.hansson@linaro.org/
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 0e789b491b ("pmdomain: core: Leave powered-on genpds on until sync_state")
Fixes: 13a4b7fb62 ("pmdomain: core: Leave powered-on genpds on until late_initcall_sync")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The recent changes to genpd makes a genpd OF provider that is powered-on at
initialization to stay powered-on, until the ->sync_state() callback is
invoked for it.
This may not happen at all, if we wait for a consumer device to be probed,
leading to wasting energy. There are ways to enforce the ->sync_state()
callback to be invoked, through sysfs or via the probe-defer-timeout, but
none of them in its current form are a good fit for rcar-sysc PM domains.
Let's therefore opt-out from this behaviour of genpd for now, by using the
GENPD_FLAG_NO_STAY_ON.
Link: https://lore.kernel.org/all/20250701114733.636510-1-ulf.hansson@linaro.org/
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 0e789b491b ("pmdomain: core: Leave powered-on genpds on until sync_state")
Fixes: 13a4b7fb62 ("pmdomain: core: Leave powered-on genpds on until late_initcall_sync")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The deferred regulator retrieval for Rockchip PM domains are causing some
weird dependencies. More precisely, if the power-domain is powered-on from
the HW perspective, its corresponding regulator must not be powered-off via
regulator_init_complete(), which is a late_initcall_sync.
Even on platforms that don't have the domain-supply regulator specified for
the power-domain provider, may suffer from these problems.
More precisely, things just happen to work before, because
genpd_power_off_unused() (also a late_initcall_sync) managed to power-off
the PM domain before regulator_init_complete() powered-off the regulator.
Ideally this fragile dependency must be fixed properly for the Rockchip PM
domains, but until then, let's fallback to the previous behaviour by using
the GENPD_FLAG_NO_STAY_ON flag.
Link: https://lore.kernel.org/all/20250902-rk3576-lockup-regression-v1-1-c4a0c9daeb00@collabora.com/
Reported-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Fixes: 0e789b491b ("pmdomain: core: Leave powered-on genpds on until sync_state")
Fixes: 13a4b7fb62 ("pmdomain: core: Leave powered-on genpds on until late_initcall_sync")
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Recent changes to genpd prevents those PM domains being powered-on during
initialization from being powered-off during the boot sequence. Based upon
whether CONFIG_PM_CONFIG_PM_GENERIC_DOMAINS_OF is set of not, genpd relies
on the sync_state mechanism or the genpd_power_off_unused() (which is a
late_initcall_sync), to understand when it's okay to allow these PM domains
to be powered-off.
This new behaviour in genpd has lead to problems on different platforms.
Let's therefore restore the behavior of genpd_power_off_unused().
Moreover, let's introduce GENPD_FLAG_NO_STAY_ON, to allow genpd OF
providers to opt-out from the new behaviour.
Link: https://lore.kernel.org/all/20250701114733.636510-1-ulf.hansson@linaro.org/
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/all/20250902-rk3576-lockup-regression-v1-1-c4a0c9daeb00@collabora.com/
Reported-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Fixes: 0e789b491b ("pmdomain: core: Leave powered-on genpds on until sync_state")
Fixes: 13a4b7fb62 ("pmdomain: core: Leave powered-on genpds on until late_initcall_sync")
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Supported a complete jump_label implementation based on the ARM64 and
RV64 version and add the CONFIG_JUMP_LABEL=y to the defconfig.
Testing was conducted using a dedicated test module jump-label-test,
provided in the link below. For detailed steps, please refer to the
README also at the provided link.
Link: https://github.com/ChenMiaoi/GSoC-2025-Final-Report/tree/main/tests/jump-label-test
Test Environment:
- Hardware: QEMU emulated OR1K
- Kernel Version: 6.17.0-rc3-dirty
- Configs: CONFIG_MODULES=y,CONFIG_MODULE_UNLOAD=y
- Toolchain: or1k-none-linux-musl-gcc 15.1.0
Test Results:
$ insmod jump_label_test.ko
[ 32.590000] Jump label performance test module loaded
[ 35.250000] Normal branch time: 1241327150 ns (124 ns per iteration)
[ 35.250000] Jump label (false) time: 706422700 ns (70 ns per iteration)
[ 35.250000] Jump label (true) time: 708913450 ns (70 ns per iteration)
$ rmmod jump_label_test.ko
[ 72.210000] Jump label test module unloaded
The results show approximately 43% improvement in branch performance
when using jump labels compared to traditional branches.
Link: https://lore.kernel.org/openrisc/aLsZ9S3X0OpKy1RM@antec/T/#u
Signed-off-by: chenmiao <chenmiao.ku@gmail.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Regenerating defconfigs allows subsequent changes to the configs to
be related only to the corresponding modifications, without mixing
changes from other configs.
Signed-off-by: chenmiao <chenmiao.ku@gmail.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
To ensure the proper functioning of the jump_label test module, this patch
adds support for the R_OR1K_32_PCREL relocation type for any modules. The
implementation calculates the PC-relative offset by subtracting the
instruction location from the target value and stores the result at the
specified location.
Signed-off-by: chenmiao <chenmiao.ku@gmail.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Add text patching api's to use in subsequent jump_label implementation. We use
a new fixmap FIX_TEXT_POKE0 entry to temporarily override MMU mappings to allow
read only text pages to be written to.
Previously, __set_fix was marked with __init as it was only used during the
EARLYCON stage. Now that TEXT_POKE mappings require post-init usage
(e.g., FIX_TEXT_POKE0), keeping __init would cause runtime bugs whenset_fixmap
accesses invalid memory. Thus, we remove the __init flag to ensure __set_fix
remains valid beyond initialization.
A new function patch_insn_write is exposed to allow single instruction patching.
Link: https://lore.kernel.org/openrisc/aJIC8o1WmVHol9RY@antec/T/#t
Signed-off-by: chenmiao <chenmiao.ku@gmail.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Add a helper at the end of the MCA polling function to collect vendor and/or
feature actions.
Start with a basic skeleton for now. Actions for AMD thresholding and deferred
errors will be added later.
[ bp: Drop the obvious comment too. ]
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/20250908-wip-mca-updates-v6-0-eef5d6c74b9c@amd.com
There are a number of generic and vendor-specific status checks in
machine_check_poll(). These are used to determine if an error should be
skipped.
Move these into helper functions. Future vendor-specific checks will be
added to the helpers.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250908-wip-mca-updates-v6-0-eef5d6c74b9c@amd.com
Many quirks are global configuration settings and a handful apply to
each CPU.
Move the per-CPU quirks to vendor init to execute them on each online
CPU. Set the global quirks during BSP-only init so they're only executed
once and early.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250908-wip-mca-updates-v6-0-eef5d6c74b9c@amd.com
The 'UNKNOWN' vendor check is handled as a quirk that is run on each
online CPU. However, all CPUs are expected to have the same vendor.
Move the 'UNKNOWN' vendor check to the BSP-only init so it is done early
and once. Remove the unnecessary return value from the quirks check.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250908-wip-mca-updates-v6-0-eef5d6c74b9c@amd.com
Currently, on AMD systems, MCA interrupt handler functions are set during CPU
init. However, the functions only need to be set once for the whole system.
Assign the handlers only during BSP init. Do so only for SMCA systems to
maintain the old behavior for legacy systems.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/20250908-wip-mca-updates-v6-0-eef5d6c74b9c@amd.com
Ido Schimmel says:
====================
ipv4: icmp: Fix source IP derivation in presence of VRFs
Align IPv4 with IPv6 and in the presence of VRFs generate ICMP error
messages with a source IP that is derived from the receiving interface
and not from its VRF master. This is especially important when the error
messages are "Time Exceeded" messages as it means that utilities like
traceroute will show an incorrect packet path.
Patches #1-#2 are preparations.
Patch #3 is the actual change.
Patches #4-#7 make small improvements in the existing traceroute test.
Patch #8 extends the traceroute test with VRF test cases for both IPv4
and IPv6.
Changes since v1 [1]:
* Rebase.
[1] https://lore.kernel.org/netdev/20250901083027.183468-1-idosch@nvidia.com/
====================
Link: https://patch.msgid.link/20250908073238.119240-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Create versions of the existing test cases where the routers generating
the ICMP error messages are using VRFs. Check that the source IPs of
these messages do not change in the presence of VRFs.
IPv6 always behaved correctly, but IPv4 fails when reverting "ipv4:
icmp: Fix source IP derivation in presence of VRFs".
Without IPv4 change:
# ./traceroute.sh
TEST: IPv6 traceroute [ OK ]
TEST: IPv6 traceroute with VRF [ OK ]
TEST: IPv4 traceroute [ OK ]
TEST: IPv4 traceroute with VRF [FAIL]
traceroute did not return 1.0.3.1
$ echo $?
1
The test fails because the ICMP error message is sent with the VRF
device's IP (1.0.4.1):
# traceroute -n -s 1.0.1.3 1.0.2.4
traceroute to 1.0.2.4 (1.0.2.4), 30 hops max, 60 byte packets
1 1.0.4.1 0.165 ms 0.110 ms 0.103 ms
2 1.0.2.4 0.098 ms 0.085 ms 0.078 ms
# traceroute -n -s 1.0.3.3 1.0.2.4
traceroute to 1.0.2.4 (1.0.2.4), 30 hops max, 60 byte packets
1 1.0.4.1 0.201 ms 0.138 ms 0.129 ms
2 1.0.2.4 0.123 ms 0.105 ms 0.098 ms
With IPv4 change:
# ./traceroute.sh
TEST: IPv6 traceroute [ OK ]
TEST: IPv6 traceroute with VRF [ OK ]
TEST: IPv4 traceroute [ OK ]
TEST: IPv4 traceroute with VRF [ OK ]
$ echo $?
0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250908073238.119240-9-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When generating ICMP error messages, the kernel will prefer a source IP
that is on the same subnet as the destination IP (see
inet_select_addr()). Test this behavior by invoking traceroute with
different source IPs and checking that the ICMP error message is
generated with a source IP in the same subnet.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250908073238.119240-8-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Both of the addresses are configured as primary addresses, but the
kernel is expected to choose 10.0.1.1/24 as the source IP of the ICMP
error message since it is on the same subnet as the destination IP of
the message (10.0.1.3/24). Reword the comment to reflect that.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250908073238.119240-7-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use require_command() so that the test will return SKIP (4) when a
required command is not present.
Before:
# ./traceroute.sh
SKIP: Could not run IPV6 test without traceroute6
SKIP: Could not run IPV4 test without traceroute
$ echo $?
0
After:
# ./traceroute.sh
TEST: traceroute6 not installed [SKIP]
$ echo $?
4
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250908073238.119240-6-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The test always returns success even if some tests were modified to
fail. Fix by converting the test to use the appropriate library
functions instead of using its own functions.
Before:
# ./traceroute.sh
TEST: IPV6 traceroute [FAIL]
TEST: IPV4 traceroute [ OK ]
Tests passed: 1
Tests failed: 1
$ echo $?
0
After:
# ./traceroute.sh
TEST: IPv6 traceroute [FAIL]
traceroute6 did not return 2000:102::2
TEST: IPv4 traceroute [ OK ]
$ echo $?
1
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250908073238.119240-5-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When the "icmp_errors_use_inbound_ifaddr" sysctl is enabled, the source
IP of ICMP error messages should be the "primary address of the
interface that received the packet that caused the icmp error".
The IPv4 ICMP code determines this interface using inet_iif() which in
the input path translates to skb->skb_iif. If the interface that
received the packet is a VRF port, skb->skb_iif will contain the ifindex
of the VRF device and not that of the receiving interface. This is
because in the input path the VRF driver overrides skb->skb_iif with the
ifindex of the VRF device itself (see vrf_ip_rcv()).
As such, the source IP that will be chosen for the ICMP error message is
either an address assigned to the VRF device itself (if present) or an
address assigned to some VRF port, not necessarily the input or output
interface.
This behavior is especially problematic when the error messages are
"Time Exceeded" messages as it means that utilities like traceroute will
show an incorrect packet path.
Solve this by determining the input interface based on the iif field in
the control block, if present. This field is set in the input path to
skb->skb_iif and is not later overridden by the VRF driver, unlike
skb->skb_iif.
This behavior is consistent with the IPv6 counterpart that already uses
the iif from the control block.
Reported-by: Andy Roulin <aroulin@nvidia.com>
Reported-by: Rajkumar Srinivasan <rajsrinivasa@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250908073238.119240-4-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
__icmp_send() is used to generate ICMP error messages in response to
various situations such as MTU errors (i.e., "Fragmentation Required")
and too many hops (i.e., "Time Exceeded").
The skb that generated the error does not necessarily come from the IPv4
layer and does not always have a valid IPv4 control block in skb->cb.
Therefore, commit 9ef6b42ad6 ("net: Add __icmp_send helper.") changed
the function to take the IP options structure as argument instead of
deriving it from the skb's control block. Some callers of this function
such as icmp_send() pass the IP options structure from the skb's control
block as in these call paths the control block is known to be valid, but
other callers simply pass a zeroed structure.
A subsequent patch will need __icmp_send() to access more information
from the IPv4 control block (specifically, the ifindex of the input
interface). As a preparation for this change, change the function to
take the IPv4 control block structure as an argument instead of the IP
options structure. This makes the function similar to its IPv6
counterpart that already takes the IPv6 control block structure as an
argument.
No functional changes intended.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250908073238.119240-3-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When __ip_options_compile() is called with an skb, the IP options are
parsed from the skb data into the provided IP option argument. This is
in contrast to the case where the skb argument is NULL and the options
are parsed from opt->__data.
Given that cipso_v4_error() always passes an skb to
__ip_options_compile(), there is no need to allocate an extra 40 bytes
(maximum IP options size).
Therefore, simplify the function by removing these extra bytes and make
the function similar to ipv4_send_dest_unreach() which also calls both
__ip_options_compile() and __icmp_send().
This is a preparation for changing the arguments being passed to
__icmp_send().
No functional changes intended.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250908073238.119240-2-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, MCA initialization is executed identically on each CPU as
they are brought online. However, a number of MCA initialization tasks
only need to be done once.
Define a function to collect all 'global' init tasks and call this from
the BSP only. Start with CPU features.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250908-wip-mca-updates-v6-0-eef5d6c74b9c@amd.com
Set the CR4.MCE bit as the last step during init. This brings the MCA
init order closer to what is described in the x86 docs.
x86 docs:
AMD Intel
MCG_CTL
MCA_CONFIG MCG_EXT_CTL
MCi_CTL MCi_CTL
MCG_CTL
CR4.MCE CR4.MCE
Current Linux:
AMD Intel
CR4.MCE CR4.MCE
MCG_CTL MCG_CTL
MCA_CONFIG MCG_EXT_CTL
MCi_CTL MCi_CTL
Updated Linux:
AMD Intel
MCG_CTL MCG_CTL
MCA_CONFIG MCG_EXT_CTL
MCi_CTL MCi_CTL
CR4.MCE CR4.MCE
The new init flow will match Intel's docs, but there will still be a
mismatch for AMD regarding MCG_CTL. However, there is no known issue with this
ordering, so leave it for now.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/20250908-wip-mca-updates-v6-0-eef5d6c74b9c@amd.com
Jakub Kicinski says:
====================
net: xdp: handle frags with unreadable memory
Make XDP helpers compatible with unreadable memory. This is very
similar to how we handle pfmemalloc frags today. Record the info
in xdp_buf flags as frags get added and then update the skb once
allocated.
This series adds the unreadable memory metadata tracking to drivers
using xdp_build_skb_from*() with no changes on the driver side - hence
the only driver changes here are refactoring. Obviously, unreadable memory
is incompatible with XDP today, but thanks to xdp_build_skb_from_buf()
increasing number of drivers have a unified datapath, whether XDP is
enabled or not.
RFC: https://lore.kernel.org/20250812161528.835855-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250905221539.2930285-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We don't expect frags with unreadable memory to be presented
to XDP programs today, but the XDP helpers are designed to be
usable whether XDP is enabled or not. Support handling frags
with unreadable memory.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250905221539.2930285-3-kuba@kernel.org
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
xdp_update_skb_shared_info() needs to update skb state which
was maintained in xdp_buff / frame. Pass full flags into it,
instead of breaking it out bit by bit. We will need to add
a bit for unreadable frags (even tho XDP doesn't support
those the driver paths may be common), at which point almost
all call sites would become:
xdp_update_skb_shared_info(skb, num_frags,
sinfo->xdp_frags_size,
MY_PAGE_SIZE * num_frags,
xdp_buff_is_frag_pfmemalloc(xdp),
xdp_buff_is_frag_unreadable(xdp));
Keep a helper for accessing the flags, in case we need to
transform them somehow in the future (e.g. to cover up xdp_buff
vs xdp_frame differences).
While we are touching call callers - rename the helper to
xdp_update_skb_frags_info(), previous name may have implied that
it's shinfo that's updated. We are updating flags in struct sk_buff
based on frags that got attched.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20250905221539.2930285-2-kuba@kernel.org
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
hsr_get_port_ndev calls hsr_for_each_port, which need to hold rcu lock.
On the other hand, before return the port device, we need to hold the
device reference to avoid UaF in the caller function.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Fixes: 9c10dd8eed ("net: hsr: Create and export hsr_get_port_ndev()")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250905091533.377443-4-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
hsr_port_get_hsr() iterates over ports using hsr_for_each_port(),
but many of its callers do not hold the required RCU lock.
Switch to hsr_for_each_port_rtnl(), since most callers already hold
the rtnl lock. After review, all callers are covered by either the rtnl
lock or the RCU lock, except hsr_dev_xmit(). Fix this by adding an
RCU read lock there.
Fixes: c5a7591172 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250905091533.377443-3-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
hsr_for_each_port is called in many places without holding the RCU read
lock, this may trigger warnings on debug kernels. Most of the callers
are actually hold rtnl lock. So add a new helper hsr_for_each_port_rtnl
to allow callers in suitable contexts to iterate ports safely without
explicit RCU locking.
This patch only fixed the callers that is hold rtnl lock. Other caller
issues will be fixed in later patches.
Fixes: c5a7591172 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250905091533.377443-2-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Userspace relies on the ring field of gpu_scheduler tracepoints to
identify a drm_gpu_scheduler. The value of the ring field is taken from
sched->name.
Because we typically have multiple schedulers running in parallel in
each process, assign unique names to schedulers such that userspace can
distinguish them.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250902200624.428175-1-olvaffe@gmail.com
ACPM PMIC command handlers returned a u8 value when they should
have returned either zero or negative error codes.
Translate the APM PMIC errno to linux errno.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-input/aElHlTApXj-W_o1r@stanley.mountain/
Fixes: a88927b534 ("firmware: add Exynos ACPM protocol driver")
Cc: stable@vger.kernel.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add support in the OP-TEE backend driver for dynamic protected memory
allocation using the SMC ABI.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Add support in the OP-TEE backend driver dynamic protected memory
allocation with FF-A.
The protected memory pools for dynamically allocated protected memory
are instantiated when requested by user-space. This instantiation can
fail if OP-TEE doesn't support the requested use-case of protected
memory.
Restricted memory pools based on a static carveout or dynamic allocation
can coexist for different use-cases. We use only dynamic allocation with
FF-A.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Add support in the OP-TEE backend driver for protected memory
allocation. The support is limited to only the SMC ABI and for secure
video buffers.
OP-TEE is probed for the range of protected physical memory and a
memory pool allocator is initialized if OP-TEE have support for such
memory.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Add tee_shm_alloc_dma_mem() to allocate DMA memory. The memory is
represented by a tee_shm object using the new flag TEE_SHM_DMA_MEM to
identify it as DMA memory. The allocated memory will later be lent to
the TEE to be used as protected memory.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Add a userspace API to create a tee_shm object that refers to a dmabuf
reference.
Userspace registers the dmabuf file descriptor as in a tee_shm object.
The registration is completed with a tee_shm returned file descriptor.
Userspace is free to close the dmabuf file descriptor after it has been
registered since all the resources are now held via the new tee_shm
object.
Closing the tee_shm file descriptor will eventually release all
resources used by the tee_shm object when all references are released.
The new IOCTL, TEE_IOC_SHM_REGISTER_FD, supports dmabuf references to
physically contiguous memory buffers. Dmabuf references acquired from
the TEE DMA-heap can be used as protected memory for Secure Video Path
and such use cases. It depends on the TEE and the TEE driver if dmabuf
references acquired by other means can be used.
A new tee_shm flag is added to identify tee_shm objects built from a
registered dmabuf, TEE_SHM_DMA_BUF.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Olivier Masse <olivier.masse@nxp.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Break out the memref handling into a separate helper function.
No change in behavior.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Implement DMA heap for protected DMA-buf allocation in the TEE
subsystem.
Protected memory refers to memory buffers behind a hardware enforced
firewall. It is not accessible to the kernel during normal circumstances
but rather only accessible to certain hardware IPs or CPUs executing in
higher or differently privileged mode than the kernel itself. This
interface allows to allocate and manage such protected memory buffers
via interaction with a TEE implementation.
The protected memory is allocated for a specific use-case, like Secure
Video Playback, Trusted UI, or Secure Video Recording where certain
hardware devices can access the memory.
The DMA-heaps are enabled explicitly by the TEE backend driver. The TEE
backend drivers needs to implement protected memory pool to manage the
protected memory.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Export the dma-buf heap functions to allow them to be used by the OP-TEE
driver. The OP-TEE driver wants to register and manage specific secure
DMA heaps with it.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
