Add lane equalization setting for 8.0 GT/s and 32.0 GT/s to enhance link
stability and avoid AER Correctable Errors reported on some platforms
(eg. SA8775P).
8.0 GT/s, 16.0 GT/s and 32.0 GT/s require the same equalization setting.
This setting is programmed into a group of shadow registers, which can be
switched to configure equalization for different speeds by writing 00b,
01b and 10b to `RATE_SHADOW_SEL`.
Hence, program equalization registers in a loop using link speed as index,
so that equalization setting can be programmed for 8.0 GT/s, 16.0 GT/s
and 32.0 GT/s.
Fixes: 489f14be0e ("arm64: dts: qcom: sa8775p: Add pcie0 and pcie1 nodes")
Co-developed-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Ziyue Zhang <ziyue.zhang@oss.qualcomm.com>
[mani: wrapped the warning to fit 100 columns, used post-increment for loop]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250904065225.1762793-2-ziyue.zhang@oss.qualcomm.com
Commit bb4a0f497b ("ASoC: codecs: lpass: Drop unused
AIF_INVALID first DAI identifier") removed first entry in enum with DAI
identifiers, because it looked unused. Turns out that there is a
relation between DAI ID and "WSA RX0 Mux"-like kcontrols (which use
"rx_mux_text" array). That "rx_mux_text" array used first three entries
of DAI IDs enum, with value '0' being invalid.
The value passed tp "WSA RX0 Mux"-like kcontrols was used as DAI ID and
set to configure active channel count and mask, which are arrays indexed
by DAI ID.
After removal of first AIF_INVALID DAI identifier, this kcontrol was
updating wrong entries in active channel count and mask arrays which was
visible in reduced quality (distortions) during speaker playback on
several boards like Lenovo T14s laptop and Qualcomm SM8550-based boards.
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Fixes: bb4a0f497b ("ASoC: codecs: lpass: Drop unused AIF_INVALID first DAI identifier")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Message-ID: <20250831151401.30897-2-krzysztof.kozlowski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit bb4a0f497b ("ASoC: codecs: lpass: Drop unused
AIF_INVALID first DAI identifier") removed first entry in enum with DAI
identifiers, because it looked unused. Turns out that there is a
relation between DAI ID and "RX_MACRO RX0 MUX"-like kcontrols which use
"rx_macro_mux_text" array. That "rx_macro_mux_text" array used first
three entries of DAI IDs enum, with value '0' being invalid.
The value passed tp "RX_MACRO RX0 MUX"-like kcontrols was used as DAI ID
and set to configure active channel count and mask, which are arrays
indexed by DAI ID.
After removal of first AIF_INVALID DAI identifier, this kcontrol was
updating wrong entries in active channel count and mask arrays which was
visible in reduced quality (distortions) during headset playback on the
Qualcomm SM8750 MTP8750 board. It seems it also fixes recording silence
(instead of actual sound) via headset, even though that's different
macro codec.
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Fixes: bb4a0f497b ("ASoC: codecs: lpass: Drop unused AIF_INVALID first DAI identifier")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Message-ID: <20250901074403.137263-2-krzysztof.kozlowski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
There can be a NULL pointer dereference bug here. NULL is passed to
__cifs_sfu_make_node without checks, which passes it unchecked to
cifs_strndup_to_utf16, which in turn passes it to
cifs_local_to_utf16_bytes where '*from' is dereferenced, causing a crash.
This patch adds a check for NULL 'src' in cifs_strndup_to_utf16 and
returns NULL early to prevent dereferencing NULL pointer.
Found by Linux Verification Center (linuxtesting.org) with SVACE
Signed-off-by: Makar Semyonov <m.semenov@tssltd.ru>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
In md_do_sync(), when md_sync_action returns ACTION_FROZEN, subsequent
call to md_sync_position() will return MaxSector. This causes
'curr_resync' (and later 'recovery_offset') to be set to MaxSector too,
which incorrectly signals that recovery/resync has completed, even though
disk data has not actually been updated.
To fix this issue, skip updating any offset values when the sync action
is FROZEN. The same holds true for IDLE.
Fixes: 7d9f107a4e ("md: use new helpers in md_do_sync()")
Signed-off-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/linux-raid/20250904073452.3408516-1-linan666@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
If writemostly is enabled, alloc_behind_master_bio() will allocate a new
bio for rdev, with bi_opf set to 0. Later, raid1_write_request() will
clone from this bio, hence bi_opf is still 0 for the cloned bio. Submit
this cloned bio will end up to be read, causing write data lost.
Fix this problem by inheriting bi_opf from original bio for
behind_mast_bio.
Fixes: e879a0d9cb ("md/raid1,raid10: don't ignore IO flags")
Reported-and-tested-by: Ian Dall <ian@beware.dropbear.id.au>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220507
Link: https://lore.kernel.org/linux-raid/20250903014140.3690499-1-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Li Nan <linan122@huawei.com>
Use the composite clock helpers to define simple composite clocks of
the c3-peripherals clock controller.
This reduces the verbosity of the controller code on these very simple
parts, making maintenance simpler.
Reviewed-by: Chuan Liu <chuan.liu@amlogic.com>
Link: https://lore.kernel.org/r/20250825-meson-clk-cleanup-24-v2-12-0f402f01e117@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
s4 and c3 follow exactly the same structure when it comes to PWM clocks but
differ in the way these clocks are described, for no obvious reason.
Align the description of the pwm clocks of these SoCs with the composite
clock helpers.
Reviewed-by: Chuan Liu <chuan.liu@amlogic.com>
Link: https://lore.kernel.org/r/20250825-meson-clk-cleanup-24-v2-11-0f402f01e117@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Device composite clocks tend to reproduce the usual sel/div/gate
arrangement.
Add macros to help define simple composite clocks in the system.
The idea is _not_ to replace all instances of mux, div or gate with those
macros. It is rather to use it for recurring and/or simple composite
clocks, reducing controller verbosity where it makes sense. This should
help reviews focus on the tricky parts.
Link: https://lore.kernel.org/r/20250825-meson-clk-cleanup-24-v2-10-0f402f01e117@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
All Amlogic peripheral clocks are more or less the same. The only thing
that differs is the parent data.
Adapt the common pclk definition so it takes clk_parent_data and can be
used by all controllers.
Reviewed-by: Chuan Liu <chuan.liu@amlogic.com>
Link: https://lore.kernel.org/r/20250825-meson-clk-cleanup-24-v2-8-0f402f01e117@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Every usage of CLK_IGNORE_UNUSED should be explicitly motivated and
documented. However, the PCLK macros used by most Amlogic platforms are
adding that flag systematically. Because of this, all pclks are marked with
CLK_IGNORE_UNUSED, without any form of distinction or motivation.
This may have been fine in the early days of CCF but it is not anymore.
Just removing the flag is not an option at this stage since it could cause
regression on existing platforms.
Instead, drop the flag from the macro definition and add it to the each
clock definition, for the existing clocks. This makes quite a nasty change
but it will make it a lot easier for people to contribute to fixing the
problem, clock by clock. It will also prevent new platform from being added
with a silent use of the flag.
Reviewed-by: Chuan Liu <chuan.liu@amlogic.com>
Link: https://lore.kernel.org/r/20250825-meson-clk-cleanup-24-v2-7-0f402f01e117@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
On Amlogic SoCs, the rate of a peripheral clock should not be changed,
let alone the rate of the parent PLL.
These clocks are meant to be used as provided by the parent PLL. Changing
the rate would be dangerous and would likely break a lot of devices running
from the same PLL.
Don't propagate any rate change request that may come from these clocks and
drop the corresponding flag.
Link: https://lore.kernel.org/r/20250825-meson-clk-cleanup-24-v2-6-0f402f01e117@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
clk-regmap was always meant to stay generic, without any amlogic specifics.
The hope was that it could move out of the amlogic directory one day.
Even if this may actually not become true, it should remain generic.
Move the amlogic peripheral clock definition out of clk-regmap header.
Link: https://lore.kernel.org/r/20250825-meson-clk-cleanup-24-v2-5-0f402f01e117@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Factorize the probe function of the mmio based amlogic clock controllers
using the newly introduced probe helper. This removes a fair amount
of duplicated code.
Reviewed-by: Chuan Liu <chuan.liu@amlogic.com>
Link: https://lore.kernel.org/r/20250825-meson-clk-cleanup-24-v2-3-0f402f01e117@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
What is being done by the Amlogic clock controller registration helper for
EE controllers could benefit other controllers. As such, having a specific
module for this makes little sense.
Move the helper function to clkc-utils and rename it to describe what it
does, registering syscon based controller, instead of what it serves.
Link: https://lore.kernel.org/r/20250825-meson-clk-cleanup-24-v2-1-0f402f01e117@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Implement an abstraction of vmalloc_to_page() for subsequent use in the
AsPageIter implementation of VBox and VVec.
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250820145434.94745-3-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Currently, a Page always owns the underlying struct page.
However, sometimes a struct page may be owned by some other entity, e.g.
a vmalloc allocation.
Hence, introduce BorrowedPage to support such cases, until the Ownable
solution [1] lands.
This is required by the scatterlist abstractions.
Acked-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/rust-for-linux/ZnCzLIly3DRK2eab@boqun-archlinux/ [1]
Link: https://lore.kernel.org/r/20250820145434.94745-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The wq_watchdog_timer_fn() is executed in the softirq context, this
is already in the RCU read critical section, this commit therefore
remove rcu_read_lock/unlock() in wq_watchdog_timer_fn().
Signed-off-by: Zqiang <qiang.zhang@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
The preempt_disable/enable() has already formed RCU read crtical
section, this commit therefore remove rcu_read_lock/unlock() in
workqueue_congested().
Signed-off-by: Zqiang <qiang.zhang@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
Leon Hwang says:
====================
selftests/bpf: Introduce experimental bpf_in_interrupt()
Filtering pid_tgid is meanlingless when the current task is preempted by
an interrupt.
To address this, introduce 'bpf_in_interrupt()' helper function, which
allows BPF programs to determine whether they are executing in interrupt
context.
'get_preempt_count()':
* On x86, '*(int *) bpf_this_cpu_ptr(&__preempt_count)'.
* On arm64, 'bpf_get_current_task_btf()->thread_info.preempt.count'.
Then 'bpf_in_interrupt()' will be:
* If !PREEMPT_RT, 'get_preempt_count() & (NMI_MASK | HARDIRQ_MASK
| SOFTIRQ_MASK)'.
* If PREEMPT_RT, '(get_preempt_count() & (NMI_MASK | HARDIRQ_MASK))
| (bpf_get_current_task_btf()->softirq_disable_cnt & SOFTIRQ_MASK)'.
'bpf_in_interrupt()' runs well when PREEMPT_RT is enabled. But it's
difficult for me to test it well because I'm not familiar with
PREEMPT_RT.
Changes:
v2 -> v3:
* Address comments from Alexei:
* Move bpf_in_interrupt() to bpf_experimental.h.
* Add support for arm64.
v2: https://lore.kernel.org/bpf/20250825131502.54269-1-leon.hwang@linux.dev/
v1 -> v2:
* Fix a build error reported by test bot.
====================
Link: https://patch.msgid.link/20250903140438.59517-1-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a timer test case to test 'bpf_in_interrupt()'.
cd tools/testing/selftests/bpf
./test_progs -t timer_interrupt
462 timer_interrupt:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20250903140438.59517-3-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Filtering pid_tgid is meanlingless when the current task is preempted by
an interrupt.
To address this, introduce 'bpf_in_interrupt()' helper function, which
allows BPF programs to determine whether they are executing in interrupt
context.
'get_preempt_count()':
* On x86, '*(int *) bpf_this_cpu_ptr(&__preempt_count)'.
* On arm64, 'bpf_get_current_task_btf()->thread_info.preempt.count'.
Then 'bpf_in_interrupt()' will be:
* If !PREEMPT_RT, 'get_preempt_count() & (NMI_MASK | HARDIRQ_MASK
| SOFTIRQ_MASK)'.
* If PREEMPT_RT, '(get_preempt_count() & (NMI_MASK | HARDIRQ_MASK))
| (bpf_get_current_task_btf()->softirq_disable_cnt & SOFTIRQ_MASK)'.
As for other archs, it can be added support by updating
'get_preempt_count()'.
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20250903140438.59517-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The bpf_flush_icache() is done by bpf_arch_text_copy() already.
Remove the duplicated one in arch_prepare_bpf_trampoline().
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20250904075703.49404-1-hengqi.chen@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_strcasecmp() function performs same like bpf_strcmp() except ignoring
the case of the characters.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Viktor Malik <vmalik@redhat.com>
Link: https://lore.kernel.org/r/tencent_292BD3682A628581AA904996D8E59F4ACD06@qq.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Menglong Dong says:
====================
selftests/bpf: benchmark all symbols for kprobe-multi
Add the benchmark testcase "kprobe-multi-all", which will hook all the
kernel functions during the testing.
This series is separated out from [1].
Changes since V2:
* add some comment to attach_ksyms_all, which notes that don't run the
testing on a debug kernel
Changes since V1:
* introduce trace_blacklist instead of copy-pasting strcmp in the 2nd
patch
* use fprintf() instead of printf() in 3rd patch
Link: https://lore.kernel.org/bpf/20250817024607.296117-1-dongml2@chinatelecom.cn/ [1]
====================
Link: https://patch.msgid.link/20250904021011.14069-1-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For now, the benchmark for kprobe-multi is single, which means there is
only 1 function is hooked during testing. Add the testing
"kprobe-multi-all", which will hook all the kernel functions during
the benchmark. And the "kretprobe-multi-all" is added too.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20250904021011.14069-4-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We need to get all the kernel function that can be traced sometimes, so we
move the get_syms() and get_addrs() in kprobe_multi_test.c to
trace_helpers.c and rename it to bpf_get_ksyms() and bpf_get_addrs().
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20250904021011.14069-2-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If krealloc_array() fails in iort_rmr_alloc_sids(), the function returns
NULL but does not free the original 'sids' allocation. This results in a
memory leak since the caller overwrites the original pointer with the
NULL return value.
Fixes: 491cf4a673 ("ACPI/IORT: Add support to retrieve IORT RMR reserved regions")
Cc: <stable@vger.kernel.org> # 6.0.x
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/20250828112243.61460-1-linmq006@gmail.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Explicitly state in the log message, when a device has no pnetid.
"with pnetid" and "has pnetid" was misleading for devices without pnetid.
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250901145842.1718373-3-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add interface for applications to get information array. The application
provides a buffer pointer along with information type, maximum number of
entries and maximum size of each entry. The buffer may also contain match
conditions based on the information type. After the ioctl completes, the
actual number of entries and entry size are returned. (see [1], used by
driver runtime library)
[1] https://github.com/amd/xdna-driver/blob/main/src/shim/host/platform_host.cpp#L337
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250903053402.2103196-1-lizhi.hou@amd.com
When reporting an error, the AER driver prints the TLP Header / Prefix Log
only for errors enumerated in the AER_LOG_TLP_MASKS macro.
The macro was never amended since its introduction in 2006 with commit
6c2b374d74 ("PCI-Express AER implemetation: AER core and aerdriver").
At the time, PCIe r1.1 was the latest spec revision.
Amend the macro with errors defined since then to avoid omitting the TLP
Header / Prefix Log for newer errors.
The order of the errors in AER_LOG_TLP_MASKS follows PCIe r1.1 sec 6.2.7
rather than 7.10.2, because only the former documents for which errors a
TLP Header / Prefix is logged. Retain this order. The section number is
still 6.2.7 in today's PCIe r7.0.
For Completion Timeouts, the TLP Header / Prefix is only logged if the
Completion Timeout Prefix / Header Log Capable bit is set in the AER
Capabilities and Control register. Introduce a tlp_header_logged() helper
to check whether the TLP Header / Prefix Log is populated and use it in
the two places which currently match against AER_LOG_TLP_MASKS directly.
For Uncorrectable Internal Errors, logging of the TLP Header / Prefix is
optional per PCIe r7.0 sec 6.2.7. If needed, drivers could indicate
through a flag whether devices are capable and tlp_header_logged() could
then check that flag.
pcitools introduced macros for newer errors with commit 144b0911cc0b
("ls-ecaps: extend decode support for more fields for AER CE and UE
status"):
https://git.kernel.org/pub/scm/utils/pciutils/pciutils.git/commit/?id=144b0911cc0b
Unfortunately some of those macros are overly long:
PCI_ERR_UNC_POISONED_TLP_EGRESS
PCI_ERR_UNC_DMWR_REQ_EGRESS_BLOCKED
PCI_ERR_UNC_IDE_CHECK
PCI_ERR_UNC_MISR_IDE_TLP
PCI_ERR_UNC_PCRC_CHECK
PCI_ERR_UNC_TLP_XLAT_EGRESS_BLOCKED
This seems unsuitable for <linux/pci_regs.h>, so shorten to:
PCI_ERR_UNC_POISON_BLK
PCI_ERR_UNC_DMWR_BLK
PCI_ERR_UNC_IDE_CHECK
PCI_ERR_UNC_MISR_IDE
PCI_ERR_UNC_PCRC_CHECK
PCI_ERR_UNC_XLAT_BLK
Note that some of the existing macros in <linux/pci_regs.h> do not match
exactly with pcitools (e.g. PCI_ERR_UNC_SDES versus PCI_ERR_UNC_SURPDN),
so it does not seem mandatory for them to be identical.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/5f707caf1260bd8f15012bb032f7da9a9b898aba.1756712066.git.lukas@wunner.de
Add initial devcie tree for the ARTPEC-8 Grizzly board.
The ARTPEC-8 Grizzly is a small board developed by Axis,
based on the Axis ARTPEC-8 SoC.
Signed-off-by: SeonGu Kang <ksk4725@coasia.com>
Signed-off-by: Ravi Patel <ravi.patel@samsung.com>
Link: https://lore.kernel.org/r/20250901051926.59970-6-ravi.patel@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add initial device tree support for Axis ARTPEC-8 SoC.
This SoC contains 4 Cortex-A53 CPUs and several other peripheral IPs.
Signed-off-by: SungMin Park <smn1196@coasia.com>
Signed-off-by: SeonGu Kang <ksk4725@coasia.com>
Signed-off-by: Ravi Patel <ravi.patel@samsung.com>
Link: https://lore.kernel.org/r/20250901051926.59970-5-ravi.patel@samsung.com
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
syzbot found a bug in audit_buffer_alloc() if nlmsg_new() returns NULL.
We need to initialize ab->skb_list before calling audit_buffer_free()
which will use both the skb_list spinlock and list pointers.
Fixes: eb59d494ee ("audit: add record for multiple task security contexts")
Reported-by: syzbot+bb185b018a51f8d91fd2@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/68b93e3c.a00a0220.eb3d.0000.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: audit@vger.kernel.org
Signed-off-by: Paul Moore <paul@paul-moore.com>
A panthor group can have at most MAX_CS_PER_CSG panthor queues.
Fixes: 4bdca11507 ("drm/panthor: Add the driver frontend block")
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> # v1
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250903192133.288477-1-olvaffe@gmail.com
While rvkms is only going to be using a few of these, since Deltas are
basically the same as i64 it's easy enough to just implement all of the
basic arithmetic operations for Delta types.
Keep in mind there's one quirk here - the kernel has no support for
i64 % i64 on 32 bit platforms, the closest we have is i64 % i32 through
div_s64_rem(). So, instead of implementing ops::Rem or ops::RemAssign we
simply provide Delta::rem_nanos().
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250820203704.731588-3-lyude@redhat.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
In order to copy the behavior rust currently follows for basic arithmetic
operations and panic if the result of an addition or subtraction results in
a value that would violate the invariants of Instant, but only if the
kernel has overflow checking for rust enabled.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250820203704.731588-2-lyude@redhat.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Add a simple callback for retrieving the current expiry time for an
HrTimer. In rvkms, we use the HrTimer expiry value in order to calculate
the approximate vblank timestamp during each emulated vblank interrupt.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250821193259.964504-8-lyude@redhat.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
For implementing Rust bindings which can return a point in time.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://lore.kernel.org/r/20250821193259.964504-7-lyude@redhat.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250821193259.964504-6-lyude@redhat.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
With Linux's hrtimer API, there's a number of methods that can only be
called in two situations:
* When we have exclusive access to the hrtimer and it is not currently
active
* When we're within the context of an hrtimer callback context
This commit handles the second situation and implements hrtimer_forward()
support in the context of a timer callback. We do this by introducing a
HrTimerCallbackContext type which is provided to users during the
RawHrTimerCallback::run() callback, and then add a forward() function to
the type.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250821193259.964504-5-lyude@redhat.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Within the hrtimer API there are quite a number of functions that can only
be safely called from one of two contexts:
* When we have exclusive access to the hrtimer and the timer is not active.
* When we're within the hrtimer's callback context as it is being executed.
This commit adds bindings for hrtimer_forward() for the first such context,
along with HrTimer::raw_forward() for later use in implementing the
hrtimer_forward() in the latter context.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250821193259.964504-4-lyude@redhat.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Since we want to add HrTimer methods that can accept Instants, we will want
to make sure that for each method we are using the correct Clocksource for
the given HrTimer. This would get a bit overly-verbose, so add a simple
HrTimerInstant type-alias to handle this for us.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250821193259.964504-3-lyude@redhat.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Just a drive-by fix I noticed: we don't actually document what the return
value from cancel() does, so do that.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250821193259.964504-2-lyude@redhat.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Use the standard error pointer macro to shorten the code and simplify.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20250812082709.49796-1-zhao.xichao@vivo.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
