Move some fields closer to where they are used, add missing tabs
and remove an extra newline.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
For ternary operators in the form of a ? true : false, if a itself returns
a boolean result, the ternary operator can be omitted. Remove redundant
ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Call the dedicated v4l2_disable_ioctl helper instead of manually
checking whether the current context is an encoder for the selection
api ioctls.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The existing imx8m_vpu_g1_irq implementation is an exact copy of the
default hantro_g1_irq one. Switch over to it instead of keeping a
duplicated implementation.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Jakub Kicinski says:
====================
eth: fbnic: support queue API and zero-copy Rx
Add support for queue API to fbnic, enable zero-copy Rx.
Patch 10 is likely of most interest as it adds a new core helper
(and touches mlx5). The rest of the patches are fbnic-specific
(and relatively boring).
Patches 1-3 reshuffle the Rx init/allocation path to better
align structures and functions which operate on them. Notably
patch 1 moves the page pool pointer to the queue struct (from NAPI).
Patch 4 converts the driver to use netmem_ref. The driver has
separate and explicit buffer queue for scatter / payloads, so only
references to those are converted.
Next 5 patches are more boring code shifts.
Patch 11 adds unreadable memory support to page pool allocation.
Patch 14 finally adds the support for queue API.
v2: https://lore.kernel.org/20250829012304.4146195-1-kuba@kernel.org
v1: https://lore.kernel.org/20250820025704.166248-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250901211214.1027927-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Support queue ops. fbnic doesn't shut down the entire device
just to restart a single queue.
./tools/testing/selftests/drivers/net/hw/iou-zcrx.py
TAP version 13
1..3
ok 1 iou-zcrx.test_zcrx
ok 2 iou-zcrx.test_zcrx_oneshot
ok 3 iou-zcrx.test_zcrx_rss
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
Acked-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250901211214.1027927-15-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Queue API may ask us to allocate page pools when the device
is down, to validate that we ingested a memory provider binding.
Don't require NAPI to be passed to fbnic_alloc_qt_page_pools(),
to make calling fbnic_alloc_qt_page_pools() without NAPI possible.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250901211214.1027927-14-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We need to be more careful about when direct page pool recycling
is enabled in preparation for queue ops support. Don't set the
NAPI pointer, call page_pool_enable_direct_recycling() from
the function that activates the queue (once the config can
no longer fail).
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250901211214.1027927-13-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Allow allocating a page pool with unreadable memory for the payload
ring (sub1). We need to provide the queue ID so that the memory provider
can match the PP. Use the appropriate page pool DMA sync helper.
For unreadable mem the direction has to be FROM_DEVICE. The default
is BIDIR for XDP, but obviously unreadable mem is not compatible
with XDP in the first place, so that's fine. While at it remove
the define for page pool flags.
The rxq_idx is passed to fbnic_alloc_rx_qt_resources() explicitly
to make it easy to allocate page pools without NAPI (see the patch
after the next).
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250901211214.1027927-12-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
mlx5 pokes into the rxq state to check if the queue has a memory
provider, and therefore whether it may produce unreadable mem.
Add a helper for doing this in the page pool API. fbnic will want
a similar thing (tho, for a slightly different reason).
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250901211214.1027927-11-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Factor out handling a single nv from fbnic_enable() to make
it reusable for queue ops. Use a __ prefix for the factored
out code. The real fbnic_nv_enable() which will include
fbnic_wrfl() will be added with the qops, to avoid unused
function warnings.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250901211214.1027927-9-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Factor out handling a single nv from fbnic_disable() to make
it reusable for queue ops. Use a __ prefix for the factored
out code. The real fbnic_nv_disable() which will include
fbnic_wrfl() will be added with the qops, to avoid unused
function warnings.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250901211214.1027927-7-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We'll add queue ops soon so. queue ops will opt the driver into
extra locking. Request this locking explicitly already to make
future patches smaller and easier to review.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250901211214.1027927-6-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use netmem_ref instead of struct page pointer in prep for
unreadable memory. fbnic has separate free buffer submission
queues for headers and for data. Refactor the helper which
returns page pointer for a submission buffer to take the
high level queue container, create a separate handler
for header and payload rings. This ties the "upcast" from
netmem to system page to use of sub0 which we know has
system pages.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250901211214.1027927-5-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
page pools are now at the ring level, move page pool alloc
to fbnic_alloc_rx_qt_resources(), and freeing to
fbnic_free_qt_resources().
This significantly simplifies fbnic_alloc_napi_vector() error
handling, by removing a late failure point.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250901211214.1027927-4-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Move rxq_info and mem model registration from fbnic_alloc_napi_vector()
and fbnic_alloc_nv_resources() to fbnic_alloc_rx_qt_resources().
The rxq_info is now registered later in the process, but that
should not cause any issues.
rxq_info lives in the fbnic_q_triad (qt) struct so qt init is a more
natural place. Encapsulating the logic in the qt functions will also
allow simplifying the cleanup in the NAPI related alloc functions
in the next commit.
Rx does not have a dedicated fbnic_free_rx_qt_resources(),
but we can use xdp_rxq_info_is_reg() to tell whether given
rxq_info was in use (effectively - if it's a qt for an Rx queue).
Having to pass nv into fbnic_alloc_rx_qt_resources() is not
great in terms of layering, but that's temporary, pp will
move soon..
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250901211214.1027927-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In preparation for memory providers we need a closer association
between queues and page pools. We used to have a page pool at the
NAPI level to serve all associated queues but with MP the queues
under a NAPI may no longer be created equal.
The "ring" structure in fbnic is a descriptor ring. We have separate
"rings" for payload and header pages ("to device"), as well as a ring
for completions ("from device"). Technically we only need the page
pool pointers in the "to device" rings, so adding the pointer to
the ring struct is a bit wasteful. But it makes passing the structures
around much easier.
For now both "to device" rings store a pointer to the same
page pool. Using more than one queue per NAPI is extremely rare
so don't bother trying to share a single page pool between queues.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250901211214.1027927-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit d968e50b5c ("media: rkvdec: Unstage the driver") moves the driver
from staging/media/ to media/platform/rockchip/ and adds a new section
ROCKCHIP RKVDEC VIDEO DECODER DRIVER in MAINTAINERS. It seems that it was
overlooked that the section ROCKCHIP VIDEO DECODER DRIVER in MAINTAINERS
already existed, referring to the same files before the driver was moved
as the new section refers to after the driver was moved.
So, merge the information from the two sections for ROCKCHIP (RKVDEC) VIDEO
DECODER DRIVER into one. This essentially results in adding the maintainer
of the previously existing section in the new section and then removing
that previously existing section.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Commit 4a81656c8e ("arm64: dts: mediatek: mt8188: Address binding
warnings for MDP3 nodes") caused a regression on the MDP functionality
when it removed the MT8195 compatibles from the MDP3 nodes, since the
MT8188 compatible was not yet listed as a possible MDP component
compatible in mdp_comp_dt_ids. This resulted in an empty output
bitstream when using the MDP from userspace, as well as the following
errors:
mtk-mdp3 14001000.dma-controller: Uninit component inner id 4
mtk-mdp3 14001000.dma-controller: mdp_path_ctx_init error 0
mtk-mdp3 14001000.dma-controller: CMDQ sendtask failed: -22
Add the missing compatible to the array to restore functionality.
Fixes: 4a81656c8e ("arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The .querystd callback should not program the device with the detected
standard, it should only report the standard to user-space. User-space
may then use .s_std to set the standard, if it wants to use it.
All that is required of .querystd is to setup the auto detection of
standards and report its findings.
While at it add some documentation on why this can't happen while
streaming and improve the error handling using a scoped guard.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The .s_std callback should not write the new format directly do the
device, it should only store it and have it applied by .s_stream.
As .s_stream already calls adv7180_program_std() all that is needed
is to check the standard is valid, and store it for .s_stream to
program.
While at it add a scoped guard to simplify the error handling.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The .set_fmt callback should not write the new format directly do the
device, it should only store it and have it applied by .s_stream.
The .s_stream callback already calls adv7180_set_field_mode() so it's
safe to remove programming of the device and just store the format and
have .s_stream apply it.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The s_power callback is used a bit oddly in adv7180, the callback
adv7180_set_power() do not control power to the chip itself, but
rather the power to the chips decoder.
When the decoder is powered the chip process video data, or if no video
source is available freeruns. When the decoder is off the device i2c
registers are still powered and the device can be configured.
In the current s_power implementation the device starts to transmit
video data as soon as it's powered, and the s_stream operation only
tracks if s_stream have been called or not.
The actual configuration of the device happens when the configuration
IOCTLs are called. Sometimes with very odd implementations where the
decoder have to first be power off, the device configured, and then
unconditionally power on, see adv7180_set_pad_format() for an example.
As a first step to remedy this remove the s_power callback altogether
and instead completely initialize the device from s_stream. Future work
will clean up the IOCTL callbacks that directly configures the device
that is also done by init_device().
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The two different tasks of resetting and initializing the devices, and
configured the video formats are grouped lumped together in a single
function. These two tasks are then only performed at probe time, or when
resuming from suspend. Configuration of formats are then done directly
by the IOCTL callbacks, such as .set_fmt.
Prepare for reworking the driver to only reset the device at probe and
resume, and configuring all video formats in .s_stream instead of in
each IOCTL callback by splitting the two tasks in two different
functions.
At this point there is no functional change.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Some variants of the chip (ADV7180) have it's decoder powered up after
reset, while others (ADV7280, ADV7281, ADV7282, ADV7283) have it powered
down.
This is tracked by the feature flag ADV7180_FLAG_RESET_POWERED. At probe
this flag is used to initialize the state variable powered which keeps
track of if the decoder is powered on, or off, for the resume callback.
This however misses that the decoder needs to be powered off for some
configuration of the device to take hold. So for devices where it's left
on (ADV7180) the format configuration at probe time have little effect.
This worked as the .set_fmt callback powers down the decoder, updates
the format, and powers back on the decoder.
Before moving all configuration to .s_stream this needs to be fixed.
Instead of tracking if the decoder is powered on or off, use the
flag to determine if needs to be powered down after a reset to do the
configuration.
To keep the behavior consistent with the currents implementation switch
the decoder back on for devices where this is the reset behavior. The
primary reason for this is that if not done the first 35+ frames or so
of the capture session is garbage.
To keep the support of starting the decoder when resuming from sleep on
devices where the reset behavior is to start with the decoder powered
off, use the state variable streaming. If it is set the decoder was
powered on when the system suspended so we know to start it again when
resuming.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: fix typo in comment: where -> were]
The device initialization code resets the whole device, thus the initial
controls set at probe are lost as adv7180_init_controls() are called
before init_device(). Additionally the controls were never restored
after the device where reset coming back from suspend.
Solve this by separate the setup of the controls from the creation of
them, and always set them up when the device is reset.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Instead of handling the state lock ourself in .s_ctrl use the v4l2-ctrls
core to handle it for us. This will allow us later to use the unlocked
__v4l2_ctrl_handler_setup() in initialization code where the state lock
is already held.
Add a lockdep assert to demonstrate the mutex must be held when setting
controls.
There is no functional change.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Future rework to get rid of .s_power requires the state mutex to be
held for multiple operations where initializing the device is one of
them.
Move lock handling outside init_device() but enforce the lock is held
with a lockdep_assert_held().
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The adv7180_set_power() utilizes adv7180_write() which in turn requires
the state mutex to be held, take it before calling adv7180_set_power()
to avoid tripping a lockdep_assert_held().
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Move the two functions adv7180_set_power() and init_device() earlier in
the file so they in future changes can be used from .querystd and
.s_stream as the driver is reworked to drop the usage of .s_power.
While at it fix two style issues in init_device() that checkpatch
complains about.
- Two cases of indentation issues for function arguments split over
multiple lines.
- The repetition of the word 'interrupts' in a comment.
Apart from these style fixes the functions are moved verbatim and there
are no functional changes.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
When device_register() return error in atm_register_sysfs(), which can be
triggered by kzalloc fail in device_private_init() or other reasons,
kmemleak reports the following memory leaks:
unreferenced object 0xffff88810182fb80 (size 8):
comm "insmod", pid 504, jiffies 4294852464
hex dump (first 8 bytes):
61 64 75 6d 6d 79 30 00 adummy0.
backtrace (crc 14dfadaf):
__kmalloc_node_track_caller_noprof+0x335/0x450
kvasprintf+0xb3/0x130
kobject_set_name_vargs+0x45/0x120
dev_set_name+0xa9/0xe0
atm_register_sysfs+0xf3/0x220
atm_dev_register+0x40b/0x780
0xffffffffa000b089
do_one_initcall+0x89/0x300
do_init_module+0x27b/0x7d0
load_module+0x54cd/0x5ff0
init_module_from_file+0xe4/0x150
idempotent_init_module+0x32c/0x610
__x64_sys_finit_module+0xbd/0x120
do_syscall_64+0xa8/0x270
entry_SYSCALL_64_after_hwframe+0x77/0x7f
When device_create_file() return error in atm_register_sysfs(), the same
issue also can be triggered.
Function put_device() should be called to release kobj->name memory and
other device resource, instead of kfree().
Fixes: 1fa5ae857b ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250901063537.1472221-1-wangliang74@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add hardware offloading for L2 switching on R-Car S4.
On S4 brdev is limited to one per-device (not per port). Reasoning
is that hw L2 forwarding support lacks any sort of source port based
filtering, which makes it unusable to offload more than one bridge
device. Either you allow hardware to forward destination MAC to a
port, or you have to send it to CPU. You can't make it forward only
if src and dst ports are in the same brdev.
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Michael Dege <michael.dege@renesas.com>
Link: https://patch.msgid.link/20250901-add_l2_switching-v5-3-5f13e46860d5@renesas.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Adding new functionality to the driver. Therefore splitting into multiple
c files to keep them manageable. New functionality will be added to
separate files.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Michael Dege <michael.dege@renesas.com>
Link: https://patch.msgid.link/20250901-add_l2_switching-v5-1-5f13e46860d5@renesas.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The declaration of pointer crtc_state includes an assignment to
crtc_state. The double assignment of crtc_state is redundant and
can be removed.
Fixes: 061963cd9e ("drm/sysfb: Blit to CRTC destination format")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250903083106.2703580-1-colin.i.king@gmail.com
This new attribute is supposed to be used instead of NFTA_DEVICE_NAME
for simple wildcard interface specs. It holds a NUL-terminated string
representing an interface name prefix to match on.
While kernel code to distinguish full names from prefixes in
NFTA_DEVICE_NAME is simpler than this solution, reusing the existing
attribute with different semantics leads to confusion between different
versions of kernel and user space though:
* With old kernels, wildcards submitted by user space are accepted yet
silently treated as regular names.
* With old user space, wildcards submitted by kernel may cause crashes
since libnftnl expects NUL-termination when there is none.
Using a distinct attribute type sanitizes these situations as the
receiving part detects and rejects the unexpected attribute nested in
*_HOOK_DEVS attributes.
Fixes: 6d07a28950 ("netfilter: nf_tables: Support wildcard netdev hook specs")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
Yi Chen reports that 'udpclash' loops forever depending on compiler
(and optimization level used); while (x == 1) gets optimized into
for (;;). Add volatile qualifier to avoid that.
While at it, also run it under timeout(1) and fix the resize script
to not ignore the timeout passed as second parameter to insert_flood.
Reported-by: Yi Chen <yiche@redhat.com>
Suggested-by: Yi Chen <yiche@redhat.com>
Fixes: 78a5883635 ("selftests: netfilter: add conntrack clash resolution test case")
Signed-off-by: Florian Westphal <fw@strlen.de>
Introduce a compatibility helper that allows BPF schedulers to use
scx_bpf_cpu_curr() on older kernels.
Fixes: 20b158094a ("sched_ext: Introduce scx_bpf_cpu_curr()")
Cc: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
copy_to_user() returns the number of bytes not copied on failure, not a
negative error code. Update the logic to return -EFAULT instead of the
number of bytes to correctly signal the error.
Fixes: 418807860e ("drm/xe/uapi: Add UAPI for querying VMA count and memory attributes")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://lore.kernel.org/r/20250828104933.3839825-3-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
While 'if (i <= 0) ... else if (i > 0) ...' is technically equivalent to
'if (i <= 0) ... else ...', the latter is vastly easier to read because
it avoids writing out a condition that is unnecessary. Let's drop such
unnecessary conditions.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Some architectures, such as RISC-V, use the ELF e_flags field to encode
ABI-specific information (e.g., ISA extensions, fpu support). Debuggers
like GDB rely on these flags in core dumps to correctly interpret
optional register sets. If the flags are missing or incorrect, GDB may
warn and ignore valid data, for example:
warning: Unexpected size of section '.reg2/213' in core file.
This can prevent access to fpu or other architecture-specific registers
even when they were dumped.
Save the e_flags field during ELF binary loading (in load_elf_binary())
into the mm_struct, and later retrieve it during core dump generation
(in fill_note_info()). Kconfig option CONFIG_ARCH_HAS_ELF_CORE_EFLAGS
is introduced for architectures that require this behaviour.
Signed-off-by: Svetlana Parfenova <svetlana.parfenova@syntacore.com>
Link: https://lore.kernel.org/r/20250901135350.619485-1-svetlana.parfenova@syntacore.com
Signed-off-by: Kees Cook <kees@kernel.org>
-----BEGIN PGP SIGNATURE-----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=esJU
-----END PGP SIGNATURE-----
Merge tag 'v6.17-rc4-ksmbd-fix' of git://git.samba.org/ksmbd
Pull smb server fix from Steve French:
- fix handling filenames with ":" (colon) in them
* tag 'v6.17-rc4-ksmbd-fix' of git://git.samba.org/ksmbd:
ksmbd: allow a filename to contain colons on SMB3.1.1 posix extensions
Instead of using the "sha1" crypto_shash, simply call the sha1() library
function. This is simpler and faster.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20250821175613.14717-1-ebiggers@kernel.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
