Start removing stuff from virt/queues.c that will be kept in the
main virtchnl file.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This effectively copies virtchnl.c as queues.c in a way that both files
have the same history of edits.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Add copy of virtchnl.c under the original name/location.
Now both virt/virtchnl.c and virt/queues.c have the same content,
and only the former of the two is in use.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Temporary rename of virtchnl.c into queues.c
In order to split virtchnl.c in a way that makes it much easier
to still blame new file, we do it via multiple git steps.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
PSR work is using __psr_wait_for_idle_locked to ensure PSR exit is
completed before continuing to PSR activation. __psr_wait_for_idle_locked
is unlocking PSR mutex which allows PSR disable/enable and PSR
pause/resume while PSR idle is being wait. PSR enable status is already
checked after locking again PSR mutex but PSR pause counter check is
missing. Due to this PSR work may continue to PSR activation even PSR is
paused.
Fix this by checking PSR pause counter in __psr_wait_for_idle_locked after
PSR mutex is locked again.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jeevan B <jeevan.b@intel.com>
Link: https://lore.kernel.org/r/20250826074457.1992524-1-jouni.hogander@intel.com
This patch updates the KUnit docs to show how to use the new
parameterized test context to share resources between parameter runs.
It documents and show examples of different ways the test user can
pass parameter arrays to a parameterized test. Finally, it specifies the
parameterized testing terminology.
Link: https://lore.kernel.org/r/20250826091341.1427123-8-davidgow@google.com
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Introduce example_params_test_with_init_dynamic_arr(). This new
KUnit test demonstrates directly assigning a dynamic parameter
array, using the kunit_register_params_array() macro, to a
parameterized test context.
It highlights the use of param_init() and param_exit() for
initialization and exit of a parameterized test, and their
registration to the test case with KUNIT_CASE_PARAM_WITH_INIT().
Link: https://lore.kernel.org/r/20250826091341.1427123-7-davidgow@google.com
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add example_params_test_with_init() to illustrate how to manage
shared resources across a parameterized KUnit test. This example
showcases the use of the new param_init() function and its registration
to a test using the KUNIT_CASE_PARAM_WITH_INIT() macro.
Additionally, the test demonstrates how to directly pass a parameter array
to the parameterized test context via kunit_register_params_array()
and leveraging the Resource API for shared resource management.
Link: https://lore.kernel.org/r/20250826091341.1427123-6-davidgow@google.com
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
KUnit parameterized tests currently support two primary methods f
or getting parameters:
1. Defining custom logic within a generate_params() function.
2. Using the KUNIT_ARRAY_PARAM() and KUNIT_ARRAY_PARAM_DESC()
macros with a pre-defined static array and passing
the created *_gen_params() to KUNIT_CASE_PARAM().
These methods present limitations when dealing with dynamically
generated parameter arrays, or in scenarios where populating parameters
sequentially via generate_params() is inefficient or overly complex.
This patch addresses these limitations by adding a new `params_array`
field to `struct kunit`, of the type `kunit_params`. The
`struct kunit_params` is designed to store the parameter array itself,
along with essential metadata including the parameter count, parameter
size, and a get_description() function for providing custom descriptions
for individual parameters.
The `params_array` field can be populated by calling the new
kunit_register_params_array() macro from within a param_init() function.
This will register the array as part of the parameterized test context.
The user will then need to pass kunit_array_gen_params() to the
KUNIT_CASE_PARAM_WITH_INIT() macro as the generator function, if not
providing their own. kunit_array_gen_params() is a KUnit helper that will
use the registered array to generate parameters.
The arrays passed to KUNIT_ARRAY_PARAM(,DESC) will also be registered to
the parameterized test context for consistency as well as for higher
availability of the parameter count that will be used for outputting a KTAP
test plan for a parameterized test.
This modification provides greater flexibility to the KUnit framework,
allowing testers to easily register and utilize both dynamic and static
parameter arrays.
Link: https://lore.kernel.org/r/20250826091341.1427123-5-davidgow@google.com
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
[Only output the test plan if using kunit_array_gen_params --David]
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
To enable more complex parameterized testing scenarios, the
generate_params() function needs additional context beyond just
the previously generated parameter. This patch modifies the
generate_params() function signature to include an extra
`struct kunit *test` argument, giving test users access to the
parameterized test context when generating parameters.
The `struct kunit *test` argument was added as the first parameter
to the function signature as it aligns with the convention of other
KUnit functions that accept `struct kunit *test` first. This also
mirrors the "this" or "self" reference found in object-oriented
programming languages.
This patch also modifies xe_pci_live_device_gen_param() in xe_pci.c
and nthreads_gen_params() in kcsan_test.c to reflect this signature
change.
Link: https://lore.kernel.org/r/20250826091341.1427123-4-davidgow@google.com
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Acked-by: Marco Elver <elver@google.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
[Catch some additional gen_params signatures in drm/xe/tests --David]
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add (*param_init) and (*param_exit) function pointers to
`struct kunit_case`. Users will be able to set them via the new
KUNIT_CASE_PARAM_WITH_INIT() macro.
param_init/exit will be invoked by kunit_run_tests() once before and once
after the parameterized test, respectively. They will receive the
`struct kunit` that holds the parameterized test context; facilitating
init and exit for shared state.
This patch also sets param_init/exit to None in rust/kernel/kunit.rs.
Link: https://lore.kernel.org/r/20250826091341.1427123-3-davidgow@google.com
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, KUnit parameterized tests lack a mechanism to share
resources across parameter runs because the same `struct kunit`
instance is cleaned up and reused for each run.
This patch introduces parameterized test context, enabling test
users to share resources between parameter runs. It also allows
setting up resources that need to be available for all parameter
runs only once, which is helpful in cases where setup is expensive.
To establish a parameterized test context, this patch adds a
parent pointer field to `struct kunit`. This allows resources added
to the parent `struct kunit` to be shared and accessible across all
parameter runs.
In kunit_run_tests(), the default `struct kunit` created is now
designated to act as the parameterized test context whenever a test
is parameterized.
Subsequently, a new `struct kunit` is made for each parameter run, and
its parent pointer is set to the `struct kunit` that holds the
parameterized test context.
Link: https://lore.kernel.org/r/20250826091341.1427123-2-davidgow@google.com
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
I can never remember whether --raw_output takes 'all' or 'full'. No
reason we can't support both.
For the record, 'all' is the recommended, documented option.
Link: https://lore.kernel.org/r/20250730031624.1911689-1-davidgow@google.com
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The hv_netvsc driver currently enables NAPI after opening the primary and
subchannels. This ordering creates a race: if the Hyper-V host places data
in the host -> guest ring buffer and signals the channel before
napi_enable() has been called, the channel callback will run but
napi_schedule_prep() will return false. As a result, the NAPI poller never
gets scheduled, the data in the ring buffer is not consumed, and the
receive queue may remain permanently stuck until another interrupt happens
to arrive.
Fix this by enabling NAPI and registering it with the RX/TX queues before
vmbus channel is opened. This guarantees that any early host signal after
open will correctly trigger NAPI scheduling and the ring buffer will be
drained.
Fixes: 76bb5db5c7 ("netvsc: fix use after free on module removal")
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/20250825115627.GA32189@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, in the AF_XDP transmit paths, the CIC bit of
TX Desc3 is set for all packets. Setting this bit for
packets transmitting through queues that don't support
checksum offloading causes the TX DMA to get stuck after
transmitting some packets. This patch ensures the CIC bit
of TX Desc3 is set only if the TX queue supports checksum
offloading.
Fixes: 132c32ee5b ("net: stmmac: Add TX via XDP zero-copy socket")
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Link: https://patch.msgid.link/20250825-xgmac-minor-fixes-v3-3-c225fe4444c0@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Correct supported speed modes as per the XGMAC databook.
Commit 9cb54af214 ("net: stmmac: Fix IP-cores specific
MAC capabilities") removes support for 10M, 100M and
1000HD. 1000HD is not supported by XGMAC IP, but it does
support 10M and 100M FD mode for XGMAC version >= 2_20,
and it also supports 10M and 100M HD mode if the HDSEL bit
is set in the MAC_HW_FEATURE0 reg. This commit enables support
for 10M and 100M speed modes for XGMAC IP based on XGMAC
version and MAC capabilities.
Fixes: 9cb54af214 ("net: stmmac: Fix IP-cores specific MAC capabilities")
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Link: https://patch.msgid.link/20250825-xgmac-minor-fixes-v3-2-c225fe4444c0@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enabling RX FIFO Overflow interrupts is counterproductive
and causes an interrupt storm when RX FIFO overflows.
Disabling this interrupt has no side effect and eliminates
interrupt storms when the RX FIFO overflows.
Commit 8a7cb245cf ("net: stmmac: Do not enable RX FIFO
overflow interrupts") disables RX FIFO overflow interrupts
for DWMAC4 IP and removes the corresponding handling of
this interrupt. This patch is doing the same thing for
XGMAC IP.
Fixes: 2142754f8b ("net: stmmac: Add MAC related callbacks for XGMAC2")
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250825-xgmac-minor-fixes-v3-1-c225fe4444c0@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Biggers says:
====================
ipv6: sr: Simplify and optimize HMAC calculations
This series simplifies and optimizes the HMAC calculations in
IPv6 Segment Routing.
====================
Link: https://patch.msgid.link/20250824013644.71928-1-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare the HMAC key when it is added to the kernel, instead of
preparing it implicitly for every packet. This significantly improves
the performance of seg6_hmac_compute(). A microbenchmark on x86_64
shows seg6_hmac_compute() (with HMAC-SHA256) dropping from ~1978 cycles
to ~1419 cycles, a 28% improvement.
The size of 'struct seg6_hmac_info' increases by 128 bytes, but that
should be fine, since there should not be a massive number of keys.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20250824013644.71928-3-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the HMAC-SHA1 and HMAC-SHA256 library functions instead of
crypto_shash. This is simpler and faster. Pre-allocating per-CPU hash
transformation objects and descriptors is no longer needed, and a
microbenchmark on x86_64 shows seg6_hmac_compute() (with HMAC-SHA256)
dropping from ~2494 cycles to ~1978 cycles, a 20% improvement.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20250824013644.71928-2-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The local Xoff value is being set before the firmware (FW) update.
In case of a failure where the FW is not updated with the new value,
there is no fallback to the previous value.
Update the local Xoff value after the FW has been successfully set.
Fixes: 0696d60853 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-12-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xon/Xoff sizes are derived from calculations that include
the port speed.
These settings need to be updated and applied whenever the
port speed is changed.
The port speed is typically set after the physical link goes down
and is negotiated as part of the link-up process between the two
connected interfaces.
Xon/Xoff parameters being updated at the point where the new
negotiated speed is established.
Fixes: 0696d60853 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-11-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xon/Xoff sizes are derived from calculation that include the MTU size.
Set Xon/Xoff when MTU is set.
If Xon/Xoff fails, set the previous MTU.
Fixes: 0696d60853 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-10-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Changing flow steering modes is not allowed when eswitch is in switchdev
mode. This fix ensures that any steering mode change, including to
firmware steering, is correctly blocked while eswitch mode is switchdev.
Fixes: e890acd5ff ("net/mlx5: Add devlink flow_steering_mode parameter")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If PF (Physical Function) has SFs (Sub-Functions), since the SFs are not
taking part in the synchronization flow, sync reset can lead to fatal
error on the SFs, as the function will be closed unexpectedly from the
SF point of view.
Add a check to prevent sync reset when there are SFs on a PF device
which is not ECPF, as ECPF is teardowned gracefully before reset.
Fixes: 92501fa6e4 ("net/mlx5: Ack on sync_reset_request only if PF can do reset_now")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-8-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The devlink reload fw_activate command performs firmware activation
followed by driver reload, while devlink reload driver_reinit triggers
only driver reload. However, the driver reload logic differs between the
two modes, as on driver_reinit mode mlx5 also reloads auxiliary drivers,
while in fw_activate mode the auxiliary drivers are suspended where
applicable.
Additionally, following the cited commit, if the device has multiple PFs,
the behavior during fw_activate may vary between PFs: one PF may suspend
auxiliary drivers, while another reloads them.
Align devlink dev reload fw_activate behavior with devlink dev reload
driver_reinit, to reload all auxiliary drivers.
Fixes: 72ed5d5624 ("net/mlx5: Suspend auxiliary devices only in case of PCI device suspend")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Akiva Goldberger <agoldberger@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-6-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In mlx5hws_pat_get_pattern(), when mlx5hws_pat_add_pattern_to_cache()
fails, the function attempts to clean up the pattern created by
mlx5hws_cmd_header_modify_pattern_create(). However, it incorrectly
uses *pattern_id which hasn't been set yet, instead of the local
ptrn_id variable that contains the actual pattern ID.
This results in attempting to destroy a pattern using uninitialized
data from the output parameter, rather than the valid pattern ID
returned by the firmware.
Use ptrn_id instead of *pattern_id in the cleanup path to properly
destroy the created pattern.
Fixes: aefc15a0fa ("net/mlx5: HWS, added modify header pattern and args handling")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-5-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In mlx5hws_pat_calc_nop(), src_field and dst_field are passed to
hws_action_modify_get_target_fields() which should set their values.
However, if an invalid action type is encountered, these variables
remain uninitialized and are later used to update prev_src_field
and prev_dst_field.
Initialize both variables to INVALID_FIELD to ensure they have
defined values in all code paths.
Fixes: 01e035fd03 ("net/mlx5: HWS, handle modify header actions dependency")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an invalid stc_type is provided, the function allocates memory for
shared_stc but jumps to unlock_and_out without freeing it, causing a
memory leak.
Fix by jumping to free_shared_stc label instead to ensure proper cleanup.
Fixes: 504e536d90 ("net/mlx5: HWS, added actions handling")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-3-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the error path of hws_pool_buddy_init(), the buddy allocator cleanup
doesn't free the allocator structure itself, causing a memory leak.
Add the missing kfree() to properly release all allocated memory.
Fixes: c61afff943 ("net/mlx5: HWS, added memory management handling")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-2-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-08-25 (ice, ixgbe)
For ice:
Emil adds a check to ensure auxiliary device was created before tear
down to prevent NULL a pointer dereference.
Jake reworks flow for failed Tx scheduler configuration to allow for
proper recovery and operation. He also adjusts ice_adapter index for
E825C devices as use of DSN is incompatible with this device.
Michal corrects tracking of buffer allocation failure in
ice_clean_rx_irq().
For ixgbe:
Jedrzej adds __packed attribute to ixgbe_orom_civd_info to compatibility
with device OROM data.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ixgbe: fix ixgbe_orom_civd_info struct layout
ice: fix incorrect counter for buffer allocation failures
ice: use fixed adapter index for E825C embedded devices
ice: don't leave device non-functional if Tx scheduler config fails
ice: fix NULL pointer dereference in ice_unplug_aux_dev() on reset
====================
Link: https://patch.msgid.link/20250825215019.3442873-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Chan says:
====================
bnxt_en: 3 bug fixes
The first one fixes a memory corruption issue that can happen when
FW resources change during ifdown with TCs created. The next two
fix FW resource reservation logic for TX rings and stats context.
====================
Link: https://patch.msgid.link/20250825175927.459987-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The HW resource reservation logic allows the L2 driver to use the
RoCE resources if the RoCE driver is not registered. When calculating
the stats contexts available for L2, we should not blindly subtract
the stats contexts reserved for RoCE unless the RoCE driver is
registered. This bug may cause the L2 rings to be less than the
number requested when we are close to running out of stats contexts.
Fixes: 2e4592dc9b ("bnxt_en: Change MSIX/NQs allocation policy")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250825175927.459987-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before we accept an ethtool request to increase a resource (such as
rings), we call the FW to check that the requested resource is likely
available first before we commit. But it is still possible that
the actual reservation or allocation can fail. The existing code
is missing the logic to adjust the TX rings in case the reserved
TX rings are less than requested. Add a warning message (a similar
message for RX rings already exists) and add the logic to adjust
the TX rings. Without this fix, the number of TX rings reported
to the stack can exceed the actual TX rings and ethtool -l will
report more than the actual TX rings.
Fixes: 674f50a5b0 ("bnxt_en: Implement new method to reserve rings.")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250825175927.459987-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bnxt_set_dflt_rings() assumes that it is always called before any TC has
been created. So it doesn't take bp->num_tc into account and assumes
that it is always 0 or 1.
In the FW resource or capability change scenario, the FW will return
flags in bnxt_hwrm_if_change() that will cause the driver to
reinitialize and call bnxt_cancel_reservations(). This will lead to
bnxt_init_dflt_ring_mode() calling bnxt_set_dflt_rings() and bp->num_tc
may be greater than 1. This will cause bp->tx_ring[] to be sized too
small and cause memory corruption in bnxt_alloc_cp_rings().
Fix it by properly scaling the TX rings by bp->num_tc in the code
paths mentioned above. Add 2 helper functions to determine
bp->tx_nr_rings and bp->tx_nr_rings_per_tc.
Fixes: ec5d31e3c1 ("bnxt_en: Handle firmware reset status during IF_UP.")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250825175927.459987-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous maintainer, Joyce Ooi, is no longer with the company,
and her email is no longer reachable. As a result, the maintainer
information for the Altera Triple Speed Ethernet Driver has been updated.
Changes:
- Replaced Joyce Ooi's email with Boon Khai Ng's email address.
- Kept the component's status as "Maintained".
Signed-off-by: Boon Khai Ng <boon.khai.ng@altera.com>
Link: https://patch.msgid.link/20250825071321.30131-1-boon.khai.ng@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
hw_stats now has only one variable for tx_octets/rx_octets, so we should
only increment p once, not twice. This would cause the statistics to be
reported under the wrong categories in `ethtool -S --all-groups` (which
uses hw_stats) but not `ethtool -S` (which uses ethtool_stats).
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Fixes: f6af690a29 ("net: cadence: macb: Report standard stats")
Link: https://patch.msgid.link/20250825172134.681861-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's a steady stream of TLS changes and bugs. We need active
maintainers in this area, and Boris hasn't been participating
much in upstream work. Move him to CREDITS. While at it also
add Dave Watson there who was the author of the initial SW
implementation, AFAIU.
Link: https://patch.msgid.link/20250825155753.2178045-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make sure we set HDS threshold to 0 if the device supports changing it.
It's required for ZC.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250825180447.2252977-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case changing channel count with provider bound succeeds
unexpectedly - make sure we return to original settings.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250825180447.2252977-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using error() makes it impossible for callers to unwind their
changes. Replace error() calls with proper error handling.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250825180447.2252977-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test currently modifies the HDS settings and doesn't restore them.
This may cause subsequent tests to fail (or pass when they should not).
Add defer()ed reset handling.
Link: https://patch.msgid.link/20250825175939.2249165-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the ->flowic_tos field of struct flowi_common from __u8 to
dscp_t, rename it ->flowic_dscp and propagate these changes to struct
flowi and struct flowi4.
We've had several bugs in the past where ECN bits could interfere with
IPv4 routing, because these bits were not properly cleared when setting
->flowi4_tos. These bugs should be fixed now and the dscp_t type has
been introduced to ensure that variables carrying DSCP values don't
accidentally have any ECN bits set. Several variables and structure
fields have been converted to dscp_t already, but the main IPv4 routing
structure, struct flowi4, is still using a __u8. To avoid any future
regression, this patch converts it to dscp_t.
There are many users to convert at once. Fortunately, around half of
->flowi4_tos users already have a dscp_t value at hand, which they
currently convert to __u8 using inet_dscp_to_dsfield(). For all of
these users, we just need to drop that conversion.
But, although we try to do the __u8 <-> dscp_t conversions at the
boundaries of the network or of user space, some places still store
TOS/DSCP variables as __u8 in core networking code. Those can hardly be
converted either because the data structure is part of UAPI or because
the same variable or field is also used for handling ECN in other parts
of the code. In all of these cases where we don't have a dscp_t
variable at hand, we need to use inet_dsfield_to_dscp() when
interacting with ->flowi4_dscp.
Changes since v1:
* Fix space alignment in __bpf_redirect_neigh_v4() (Ido).
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/29acecb45e911d17446b9a3dbdb1ab7b821ea371.1756128932.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
