This attributes sets the pat_index for the svm used vma range, which is
utilized to ascertain the coherence.
v2 (Matthew Brost)
- Pat index sanity check
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250821173104.3030148-12-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
When the user sets the valid devmem_fd as a preferred location, GPU fault
will trigger migration to tile of device associated with devmem_fd.
If the user sets an invalid devmem_fd the preferred location is current
placement(smem) only.
v2(Matthew Brost)
- Default should be faulting tile
- remove devmem_fd used as region
v3 (Matthew Brost)
- Add migration_policy
- Fix return condition
- fix migrate condition
v4
-Rebase
v5
- Add check for userptr and bo based vmas
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250821173104.3030148-11-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
If the platform does not support atomic access on system memory, and the
ranges are in system memory, but the user requires atomic accesses on
the VMA, then migrate the ranges to VRAM. Apply this policy for prefetch
operations as well.
v2
- Drop unnecessary vm_dbg
v3 (Matthew Brost)
- fix atomic policy
- prefetch shouldn't have any impact of atomic
- bo can be accessed from vma, avoid duplicate parameter
v4 (Matthew Brost)
- Remove TODO comment
- Fix comment
- Dont allow gpu atomic ops when user is setting atomic attr as CPU
v5 (Matthew Brost)
- Fix atomic checks
- Add userptr checks
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250821173104.3030148-10-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
This driver-specific ioctl enables UMDs to control the memory attributes
for GPU VMAs within a specified input range. If the start or end
addresses fall within an existing VMA, the VMA is split accordingly. The
attributes of the VMA are modified as provided by the users. The old
mappings of the VMAs are invalidated, and TLB invalidation is performed
if necessary.
v2(Matthew brost)
- xe_vm_in_fault_mode can't be enabled by Mesa, hence allow ioctl in non
fault mode too
- fix tlb invalidation skip for same ranges in multiple op
- use helper for tlb invalidation
- use xe_svm_notifier_lock/unlock helper
- s/lockdep_assert_held/lockdep_assert_held_write
- Add kernel-doc
v3(Matthew Brost)
- make vfunc fail safe
- Add sanitizing input args before vfunc
v4(Matthew Brost/Shuicheng)
- Make locks interruptable
- Error handling fixes
- vm_put fixes
v5(Matthew Brost)
- Flush garbage collector before any locking.
- Add check for null vma
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250821173104.3030148-9-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Introduce xe_svm_ranges_zap_ptes_in_range(), a function to zap page table
entries (PTEs) for all SVM ranges within a user-specified address range.
-v2 (Matthew Brost)
Lock should be called even for tlb_invalidation
v3(Matthew Brost)
- Update comment
- s/notifier->itree.start/drm_gpusvm_notifier_start
- s/notifier->itree.last + 1/drm_gpusvm_notifier_end
- use WRITE_ONCE
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250821173104.3030148-8-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
In the case of the MADVISE ioctl, if the start or end addresses fall
within a VMA and existing SVM ranges are present, remove the existing
SVM mappings. Then, continue with ops_parse to create new VMAs by REMAP
unmapping of old one.
v2 (Matthew Brost)
- Use vops flag to call unmapping of ranges in vm_bind_ioctl_ops_parse
- Rename the function
v3
- Fix doc
v4
- check if range is already in garbage collector (Matthew Brost)
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250821173104.3030148-7-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
If the start or end of input address range lies within system allocator
vma split the vma to create new vma's as per input range.
v2 (Matthew Brost)
- Add lockdep_assert_write for vm->lock
- Remove unnecessary page aligned checks
- Add kerrnel-doc and comments
- Remove unnecessary unwind_ops and return
v3
- Fix copying of attributes
v4
- Nit fixes
v5
- Squash identifier for madvise in xe_vma_ops to this patch
v6/v7/v8
- Rebase on drm_gpuvm changes
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250821173104.3030148-6-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
This change simplifies the logic by ensuring that remapped previous or
next VMAs are created with the same memory attributes as the original VMA.
By passing struct xe_vma_mem_attr as a parameter, we maintain consistency
in memory attributes.
-v2
*dst = *src (Matthew Brost)
-v3 (Matthew Brost)
Drop unnecessary helper
pass attr ptr as input to new_vma and vma_create
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250821173104.3030148-5-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
The PAT index determines how PTEs are encoded and can be modified by
madvise. Therefore, it is now part of the vma attributes.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250821173104.3030148-4-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
The attribute of xe_vma will determine the migration policy and the
encoding of the page table entries (PTEs) for that vma.
This attribute helps manage how memory pages are moved and how their
addresses are translated. It will be used by madvise to set the
behavior of the vma.
v2 (Matthew Brost)
- Add docs
v3 (Matthew Brost)
- Add uapi references
- 80 characters line wrap
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20250821173104.3030148-3-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
This commit introduces a new madvise interface to support
driver-specific ioctl operations. The madvise interface allows for more
efficient memory management by providing hints to the driver about the
expected memory usage and pte update policy for gpuvma.
v2 (Matthew/Thomas)
- Drop num_ops support
- Drop purgeable support
- Add kernel-docs
- IOWR/IOW
v3 (Matthew/Thomas)
- Reorder attributes
- use __u16 for migration_policy
- use __u64 for reserved in unions
- Avoid usage of vma
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250821173104.3030148-2-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Some clients, such as PCIe, may operate at the same clock frequency
across different data rates by varying link width. In such cases,
frequency alone is not sufficient to uniquely identify an OPP.
To support these scenarios, introduce a new API
dev_pm_opp_find_key_exact() that allows OPP lookup with different
set of keys like freq, level & bandwidth.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[ Viresh: Minor cleanups ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Simplifies error handling by replacing the manual check
of the return value with the `to_result` helper.
Signed-off-by: Onur Özkan <work@onurozkan.dev>
Reviewed-by: Elle Rhumsaa <elle@weathered-steel.dev>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Sync with drm-misc-next which is necessary for changes in gpuvm
and gpusvm that will be used in xe.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Commit b0a2ee5567 ("drm/xe: prepare xe_gen_wa_oob to be multi-use")
introduced a call to basename(). The GNU version of this function is not
portable and fails to build with alternative libc implementations like
musl or bionic. This causes the following build error:
drivers/gpu/drm/xe/xe_gen_wa_oob.c:130:12: error: assignment to ‘const char *’ from ‘int’ makes pointer from integer without a cast [-Wint-conversion]
130 | fn = basename(fn);
| ^
While a POSIX version of basename() could be used, it would require a
separate header plus the behavior differs from GNU version in that it
might modify its argument. Not great.
Instead, implement a local xbasename() helper based on strrchr() that
provides the same functionality and avoids portability issues.
Fixes: b0a2ee5567 ("drm/xe: prepare xe_gen_wa_oob to be multi-use")
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tiffany Yang <ynaffit@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250825155743.1132433-1-cmllamas@google.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
On the first validate of an imported dma-buf (initial bind), the device
has no GPU mappings, so a rebind is unnecessary. Rebinding here is
harmful in multi-GPU setups and for VMs using preempt-fence mode, as it
would evict in-flight GPU work.
v2:
- Drop dma_buf_validated, check for XE_PL_SYSTEM (Thomas)
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20250825152841.3837378-1-matthew.brost@intel.com
Eliminate the use of static variables within the log pull implementation
to resolve a race condition and prevent data gaps when pulling logs from
multiple controllers in parallel, ensuring each operation is properly
isolated.
Signed-off-by: Francisco Gutierrez <frankramirez@google.com>
Link: https://lore.kernel.org/r/20250723183543.1443301-1-frankramirez@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Menglong Dong says:
====================
bpf: introduce and use rcu_read_lock_dont_migrate
migrate_disable() and rcu_read_lock() are used to together in many case in
bpf. However, when PREEMPT_RCU is not enabled, rcu_read_lock() will
disable preemption, which indicate migrate_disable(), so we don't need to
call it in this case.
In this series, we introduce rcu_read_lock_dont_migrate and
rcu_read_unlock_migrate, which will call migrate_disable and
migrate_enable only when PREEMPT_RCU enabled. And use
rcu_read_lock_dont_migrate in bpf subsystem.
Changes since V2:
* make rcu_read_lock_dont_migrate() more compatible by using IS_ENABLED()
Changes since V1:
* introduce rcu_read_lock_dont_migrate() instead of
rcu_migrate_disable() + rcu_read_lock()
====================
Link: https://patch.msgid.link/20250821090609.42508-1-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use rcu_read_lock_dont_migrate() and rcu_read_unlock_migrate() in
trampoline.c to obtain better performance when PREEMPT_RCU is not enabled.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20250821090609.42508-8-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use rcu_read_lock_dont_migrate() and rcu_read_unlock_migrate() in
bpf_prog_run_array_cg to obtain better performance when PREEMPT_RCU is
not enabled.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20250821090609.42508-7-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use rcu_read_lock_dont_migrate() and rcu_read_unlock_migrate() in
bpf_task_storage_free to obtain better performance when PREEMPT_RCU is
not enabled.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20250821090609.42508-6-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use rcu_read_lock_dont_migrate() and rcu_read_unlock_migrate() in
bpf_iter_run_prog to obtain better performance when PREEMPT_RCU is
not enabled.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20250821090609.42508-5-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use rcu_read_lock_dont_migrate() and rcu_read_unlock_migrate() in
bpf_inode_storage_free to obtain better performance when PREEMPT_RCU is
not enabled.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20250821090609.42508-4-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use rcu_read_lock_dont_migrate() and rcu_read_unlock_migrate() in
bpf_cgrp_storage_free to obtain better performance when PREEMPT_RCU is
not enabled.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20250821090609.42508-3-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
migrate_disable() is called to disable migration in the kernel, and it is
often used together with rcu_read_lock().
However, with PREEMPT_RCU disabled, it's unnecessary, as rcu_read_lock()
will always disable preemption, which will also disable migration.
Introduce rcu_read_lock_dont_migrate() and rcu_read_unlock_migrate(),
which will do the migration enable and disable only when PREEMPT_RCU.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20250821090609.42508-2-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Fix a memory leak for of_pci_add_properties() failure case. Then fix
the introduced UAF.
- Add missing IORESOURCE_MEM flag on of_reserved_mem_region_to_resource()
- Add already in use vendor prefix "eswin"
- Clarify "of of" comment in of_match_device(). After many years of
drive-by patches dropping the 2nd "of" (which referred to
OpenFirmware), a correct patch finally arrived.
-----BEGIN PGP SIGNATURE-----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=0m5V
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix a memory leak for of_pci_add_properties() failure case. Then fix
the introduced UAF.
- Add missing IORESOURCE_MEM flag on of_reserved_mem_region_to_resource()
- Add already in use vendor prefix "eswin"
- Clarify "of of" comment in of_match_device(). After many years of
drive-by patches dropping the 2nd "of" (which referred to
OpenFirmware), a correct patch finally arrived
* tag 'devicetree-fixes-for-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: dynamic: Fix use after free in of_changeset_add_prop_helper()
dt-bindings: vendor-prefixes: add eswin
of: reserved_mem: Add missing IORESOURCE_MEM flag on resources
of: dynamic: Fix memleak when of_pci_add_properties() failed
of: Clarify OF device context in of_match_device() comment
Task Management to virtual drives may timeout prematurely when using a
static default timeout.
Read Abort and Reset timeouts from Device Page 0 and apply the maximum
of the firmware value and the default.
This fixes premature TM failures on virtual drives.
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20250820084138.228471-6-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
I/Os can race with controller reset and fail.
Block requests at the mid layer when reset starts using
scsi_host_block(), and resume with scsi_host_unblock() after reset
completes.
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20250820084138.228471-4-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Firmware can enter a transient fault while creating operational queues.
The driver fails the load immediately.
Add a retry loop that checks controller status and history bit after
queue creation. If either indicates a fault, retry init up to a set
limit before failing.
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20250820084138.228471-3-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During enclosure reboot or expander reset, firmware may report a link
speed of 0 in "Device Add" events while the link is still coming up.
The driver drops such devices, leaving them missing even after the link
recovers.
Fix this by treating link speed 0 as 1.5 Gbps during device addition so
the device is exposed to the OS. The actual link speed will be updated
later when link-up events arrive.
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20250820084138.228471-2-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When Wi-Fi is scanning at 2.4GHz, PTA will abort almost all the BT request.
Once the Wi-Fi slot stay too long, BT audio device can not get enough data,
audio glitch will happened. This patch limit 2.4Ghz Wi-Fi slot to 80ms
while Wi-Fi is scanning to avoid audio glitch.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250819034428.26307-5-pkshih@realtek.com
8852A uses single antenna during power save, when the loss
between two antennas is too large, previous logic induces
greater RSSI variation. Report the average beacon RSSI for
connected AP to get more stable RSSI and less unnecessary scanning.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250819034428.26307-3-pkshih@realtek.com
To optimize roaming decisions, report per-channel noise levels
during scans so supplicant can have a better view of the current
channel condition. This allows it to prefer the APs operating on
channels with lower noise levels.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250819034428.26307-2-pkshih@realtek.com
state->an_enabled was removed by
commit 4ee9b0dcf0 ("net: phylink: remove an_enabled")
but is left in mac_config() doc, so clean it.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250824013009.2443580-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_diag_dump() / tcp_diag_dump_one() is just a wrapper of
inet_diag_dump_icsk() / inet_diag_dump_one_icsk(), respectively.
Let's inline them in tcp_diag.c and move static callees as well.
Note that inet_sk_attr_size() is merged into tcp_diag_get_aux_size(),
and we remove inet_diag_handler.idiag_get_aux_size() accordingly.
While at it, BUG_ON() is replaced with DEBUG_NET_WARN_ON_ONCE().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250822190803.540788-7-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These inet_diag functions required struct inet_hashinfo because
they are shared by TCP and DCCP:
* inet_diag_dump_icsk()
* inet_diag_dump_one_icsk()
* inet_diag_find_one_icsk()
DCCP has gone, and we don't need to pass hashinfo down to them.
Let's fetch net->ipv4.tcp_death_row.hashinfo directly in the first
2 functions.
Note that inet_diag_find_one_icsk() don't need hashinfo since the
previous patch.
We will move TCP-specific functions to tcp_diag.c in the next patch.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250822190803.540788-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These socket lookup functions required struct inet_hashinfo because
they are shared by TCP and DCCP.
* __inet_lookup_established()
* __inet_lookup_listener()
* __inet6_lookup_established()
* inet6_lookup_listener()
DCCP has gone, and we don't need to pass hashinfo down to them.
Let's fetch net->ipv4.tcp_death_row.hashinfo directly in the above
4 functions.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250822190803.540788-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 6c886db2e7 ("net: remove duplicate sk_lookup helpers")
started to check if hashinfo == net->ipv4.tcp_death_row.hashinfo
in __inet_lookup_listener() and inet6_lookup_listener() and
stopped invoking BPF sk_lookup prog for DCCP.
DCCP has gone and the condition is always true.
Let's remove the hashinfo test.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250822190803.540788-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since DCCP has been removed, sk->sk_prot->twsk_prot->twsk_destructor
is always tcp_twsk_destructor().
Let's call tcp_twsk_destructor() directly in inet_twsk_free() and
remove ->twsk_destructor().
While at it, tcp_twsk_destructor() is un-exported.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250822190803.540788-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 383eed2de5 ("tcp: get rid of twsk_unique()") added
sk->sk_protocol test in __inet_check_established() and
__inet6_check_established() to remove twsk_unique() and call
tcp_twsk_unique() directly.
DCCP has gone, and the condition is always true.
Let's remove the sk_protocol test.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250822190803.540788-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
`McstFramesRcvdOk` counts the number of received multicast packets, and
it reports the value correctly.
However, reading `McstFramesRcvdOk` clears the register to zero. As a
result, the driver was reporting only the packets since the last read,
instead of the accumulated total.
Fix this by updating the multicast statistics accumulatively instaed of
instantaneously.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Tested-on: D-Link DGE-550T Rev-A3
Signed-off-by: Yeounsu Moon <yyyynoom@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250823182927.6063-3-yyyynoom@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Export airoha_ppe_check_skb routine in ppe_dev ops. check_skb callback
will be used by the MT76 driver in order to offload the traffic received
by the wlan NIC and forwarded to the ethernet one.
Add rx_wlan parameter to airoha_ppe_check_skb routine signature.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250823-airoha-en7581-wlan-rx-offload-v3-3-f78600ec3ed8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
