Just add fixed struct size validations for UAC2 and UAC3 effect
units. The descriptor has a variable-length array, so it should be
validated with a proper function later once when the unit is really
parsed and used by the driver (currently only referred partially for
the input terminal parsing).
Link: https://patch.msgid.link/20250821151751.12100-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The entry of the validators table for UAC3 feature unit is defined
with a wrong sub-type UAC_FEATURE (= 0x06) while it should have been
UAC3_FEATURE (= 0x07). This patch corrects the entry value.
Fixes: 57f8770620 ("ALSA: usb-audio: More validations of descriptor units")
Link: https://patch.msgid.link/20250821150835.8894-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a page_pool_put() function but no get equivalent.
Having multiple references to a page pool is quite useful.
It avoids branching in create / destroy paths in drivers
which support memory providers.
Use the new helper in bnxt.
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250820025704.166248-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When port buffer headroom changes, port_update_shared_buffer()
recalculates the shared buffer size and splits it in a 3:1 ratio
(lossy:lossless) - Currently, the calculation is:
lossless = shared / 4;
lossy = (shared / 4) * 3;
Meaning, the calculation dropped the remainder of shared % 4 due to
integer division, unintentionally reducing the total shared buffer
by up to three cells on each update. Over time, this could shrink
the buffer below usable size.
Fix it by changing the calculation to:
lossless = shared / 4;
lossy = shared - lossless;
This retains all buffer cells while still approximating the
intended 3:1 split, preventing capacity loss over time.
While at it, perform headroom calculations in units of cells rather than
in bytes for more accurate calculations avoiding extra divisions.
Fixes: a440030d89 ("net/mlx5e: Update shared buffer along with device buffer changes")
Signed-off-by: Armen Ratner <armeng@nvidia.com>
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20250820133209.389065-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The SW currently saves local buffer ownership when setting
the buffer.
This means that the SW assumes it has ownership of the buffer
after the command is set.
If setting the buffer fails and we remain in FW ownership,
the local buffer ownership state incorrectly remains as SW-owned.
This leads to incorrect behavior in subsequent PFC commands,
causing failures.
Instead of saving local buffer ownership in SW,
query the FW for buffer ownership when setting the buffer.
This ensures that the buffer ownership state is accurately
reflected, avoiding the issues caused by incorrect ownership
states.
Fixes: ecdf2dadee ("net/mlx5e: Receive buffer support for DCBX")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250820133209.389065-8-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a VF has been configured and the user later clears all QoS settings,
the vport element remains in the firmware QoS tree. This leads to
inconsistent behavior compared to VFs that were never configured, since
the FW assumes that unconfigured VFs are outside the QoS hierarchy.
As a result, the bandwidth share across VFs may differ, even though
none of them appear to have any configuration.
Align the driver behavior with the FW expectation by destroying the
vport QoS element when all configurations are removed.
Fixes: c9497c9890 ("net/mlx5: Add support for setting VF min rate")
Fixes: cf7e73770d ("net/mlx5: Manage TC arbiter nodes and implement full support for tc-bw")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20250820133209.389065-5-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When changing parent of a node/leaf with tc-bw configured, the code
saves and restores tc-bw values. However, it was reading the converted
hardware bw_share values (where 0 becomes 1) instead of the original
user values, causing incorrect tc-bw calculations after parent change.
Store original tc-bw values in the node structure and use them directly
for save/restore operations.
Fixes: cf7e73770d ("net/mlx5: Manage TC arbiter nodes and implement full support for tc-bw")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250820133209.389065-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the driver creates a default group (`node0`) and attaches
all vports to it unless the user explicitly sets a parent group. As a
result, when a user configures tx_share on a group and tx_share on
a VF, the expectation is for the group and the VF to share bandwidth
relatively. However, since the VF is not connected to the same parent
(but to the default node), the proportional share logic is not applied
correctly.
To fix this, remove the default group (`node0`) and instead connect
vports directly to the root TSAR when no parent is specified. This
ensures that vports and groups share the same root scheduler and their
tx_share values are compared directly under the same hierarchy.
Fixes: 0fe132eac3 ("net/mlx5: E-switch, Allow to add vports to rate groups")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250820133209.389065-3-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adjust the vport number by the base ECVF vport number so the port
attributes start at 0. Previously the port attributes would start 1
after the maximum number of host VFs.
Fixes: dc13180824 ("net/mlx5: Enable devlink port for embedded cpu VF vports")
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250820133209.389065-2-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the power supply's power budget is not defined in the device tree,
the current code still requests power and configures the PSE manager
with a 0W power limit, which is undesirable behavior.
Skip power budget configuration entirely when the budget is zero,
avoiding unnecessary power requests and preventing invalid 0W limits
from being set on the PSE manager.
Fixes: 359754013e ("net: pse-pd: pd692x0: Add support for PSE PI priority feature")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250820133321.841054-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a resource leak where manager power budgets were freed on both
success and error paths during manager setup. Power budgets should
only be freed on error paths after regulator registration or during
driver removal.
Refactor cleanup logic by extracting OF node cleanup and power budget
freeing into separate helper functions for better maintainability.
Fixes: 359754013e ("net: pse-pd: pd692x0: Add support for PSE PI priority feature")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250820132708.837255-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Octeontx2/CN10K silicon supports generating a 256-bit key per packet.
The specific fields to be extracted from a packet for key generation
are configurable via a Key Extraction (MKEX) Profile.
The AF driver scans the configured extraction profile to ensure that
fields from upper layers do not overwrite fields from lower layers in
the key.
Example Packet Field Layout:
LA: DMAC + SMAC
LB: VLAN
LC: IPv4/IPv6
LD: TCP/UDP
Valid MKEX Profile Configuration:
LA -> DMAC -> key_offset[0-5]
LC -> SIP -> key_offset[20-23]
LD -> SPORT -> key_offset[30-31]
Invalid MKEX profile configuration:
LA -> DMAC -> key_offset[0-5]
LC -> SIP -> key_offset[20-23]
LD -> SPORT -> key_offset[2-3] // Overlaps with DMAC field
In another scenario, if the MKEX profile is configured to extract
the SPI field from both AH and ESP headers at the same key offset,
the driver rejecting this configuration. In a regular traffic,
ipsec packet will be having either AH(LD) or ESP (LE). This patch
relaxes the check for the same.
Fixes: 12aa0a3b93 ("octeontx2-af: Harden rule validation.")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20250820063919.1463518-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test various combinations of zero-length records.
Unfortunately, kernel cannot be coerced into producing those,
so hardcode the ciphertext messages in the test.
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250820021952.143068-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each recvmsg() call must process either
- only contiguous DATA records (any number of them)
- one non-DATA record
If the next record has different type than what has already been
processed we break out of the main processing loop. If the record
has already been decrypted (which may be the case for TLS 1.3 where
we don't know type until decryption) we queue the pending record
to the rx_list. Next recvmsg() will pick it up from there.
Queuing the skb to rx_list after zero-copy decrypt is not possible,
since in that case we decrypted directly to the user space buffer,
and we don't have an skb to queue (darg.skb points to the ciphertext
skb for access to metadata like length).
Only data records are allowed zero-copy, and we break the processing
loop after each non-data record. So we should never zero-copy and
then find out that the record type has changed. The corner case
we missed is when the initial record comes from rx_list, and it's
zero length.
Reported-by: Muhammad Alifa Ramdhan <ramdhan@starlabs.sg>
Reported-by: Billy Jheng Bing-Jhong <billy@starlabs.sg>
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250820021952.143068-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The usage of underscores is no longer allowed for the 'name' format in
the yaml spec. Instead, dashes should be used. This fixes the build
issue reported by Thorsten that showed up on linux-next.
Note this change has no impact on C code.
Cc: Jakub Kicinski <kuba@kernel.org>
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Closes: https://lore.kernel.org/all/e21744a4-0155-40ec-b8c1-d81b14107c9f@leemhuis.info/
Fixes: 63740349eb ("binder: introduce transaction reports via netlink")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20250821135522.2878772-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the mipi_dsi_dual() macro fails, the error code is stored in
dsi_ctx.accum_err. Propagate that error back to the caller instead
of returning success as the current code does.
Fixes: a6adf47d30 ("drm/panel: jdi-lpm102a188a: Fix bug and clean up driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/aKcRfq8xBrFmhqmO@stanley.mountain
Add a new constructor to Box to facilitate Box creation from a pinned
slice of elements. This allows to efficiently allocate memory for e.g.
slices of structrures containing spinlocks or mutexes. Such slices may
be used in kmemcache like or zpool API implementations.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.se>
Link: https://lore.kernel.org/r/20250811101456.2901694-1-vitaly.wool@konsulko.se
[ Add empty lines after struct definitions in the example; end sentences
with a period. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
-----BEGIN PGP SIGNATURE-----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=dUol
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix a lot of build warnings for LTO-enabled objtool check, increase
COMMAND_LINE_SIZE up to 4096, rename a missing GCC_PLUGIN_STACKLEAK to
KSTACK_ERASE, and fix some bugs about arch timer, module loading, LBT
and KVM"
* tag 'loongarch-fixes-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Add address alignment check in pch_pic register access
LoongArch: KVM: Use kvm_get_vcpu_by_id() instead of kvm_get_vcpu()
LoongArch: KVM: Fix stack protector issue in send_ipi_data()
LoongArch: KVM: Make function kvm_own_lbt() robust
LoongArch: Rename GCC_PLUGIN_STACKLEAK to KSTACK_ERASE
LoongArch: Save LBT before FPU in setup_sigcontext()
LoongArch: Optimize module load time by optimizing PLT/GOT counting
LoongArch: Add cpuhotplug hooks to fix high cpu usage of vCPU threads
LoongArch: Increase COMMAND_LINE_SIZE up to 4096
LoongArch: Pass annotate-tablejump option if LTO is enabled
objtool/LoongArch: Get table size correctly if LTO is enabled
In the "active" mode of the amd-pstate driver with performance
governor, the CPPC.min_perf is expected to be the nominal_perf.
However after commit a9b9b4c2a4 ("cpufreq/amd-pstate: Drop min and
max cached frequencies"), this is not the case when the governor is
switched from performance to powersave and back to performance, and
the CPPC.min_perf will be equal to the scaling_min_freq that was set
for the powersave governor.
This is because prior to commit a9b9b4c2a4 ("cpufreq/amd-pstate:
Drop min and max cached frequencies"), amd_pstate_epp_update_limit()
would unconditionally call amd_pstate_update_min_max_limit() and the
latter function would enforce the CPPC.min_perf constraint when the
governor is performance.
However, after the aforementioned commit,
amd_pstate_update_min_max_limit() is called by
amd_pstate_epp_update_limit() only when either the
scaling_{min/max}_freq is different from the cached value of
cpudata->{min/max}_limit_freq, which wouldn't have changed on a
governor transition from powersave to performance, thus missing out on
enforcing the CPPC.min_perf constraint for the performance governor.
Fix this by invoking amd_pstate_epp_udpate_limit() not only when the
{min/max} limits have changed from the cached values, but also when
the policy itself has changed.
Fixes: a9b9b4c2a4 ("cpufreq/amd-pstate: Drop min and max cached frequencies")
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250821042638.356-1-gautham.shenoy@amd.com
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Documentation/devicetree/bindings/graph.txt content has move directly to
the dt-schema repo in commit 4b52be0ce6 ("dt-bindings: Remove plain
text OF graph binding").
Point to the YAML of the official repo instead of the old file.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250328114148.260322-1-rgallaispou@gmail.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
After commit 20bda12a0e (“firmware: arm_scmi: Make VirtIO transport a
standalone driver”), the VirtIO transport probes independently. During
scmi_virtio_probe, scmi_probe() is called, which intune invokes
scmi_protocol_acquire() that sends a message over the virtqueue and
waits for a reply.
Previously, DRIVER_OK was only set after scmi_vio_probe, in the core
virtio via virtio_dev_probe(). According to the Virtio spec (3.1 Device
Initialization):
| The driver MUST NOT send any buffer available notifications to the
| device before setting DRIVER_OK.
Some type-1 hypervisors block available-buffer notifications until the
driver is marked OK. In such cases, scmi_vio_probe stalls in
scmi_wait_for_reply(), and the probe never completes.
Resolve this by setting DRIVER_OK immediately after the device-specific
setup, so scmi_probe() can safely send notifications.
Note after splitting the transports into modules, the probe sequence
changed a bit. We can no longer rely on virtio_device_ready() being
called by the core in virtio_dev_probe(), because scmi_vio_probe()
doesn’t complete until the core SCMI stack runs scmi_probe(), which
immediately issues the initial BASE protocol exchanges.
Fixes: 20bda12a0e ("firmware: arm_scmi: Make VirtIO transport a standalone driver")
Signed-off-by: Junnan Wu <junnan01.wu@samsung.com>
Message-Id: <20250812075343.3201365-1-junnan01.wu@samsung.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Mark struct scmi_transport_ops as const since this driver never modifies
it. Constifying moves it to read-only memory, improving hardening -
especially important for structures with function pointers.
x86_64 (allmodconfig) size diff:
Before:
text data bss dec hex filename
6907 680 48 7635 1dd3 drivers/firmware/arm_scmi/transports/optee.o
After:
text data bss dec hex filename
6987 576 48 7611 1dbb drivers/firmware/arm_scmi/transports/optee.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-Id: <881be6ad61037ed95d5e750a2565fd9840120a08.1753816459.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Constify struct scmi_voltage_proto_ops since the driver never modifies
it. Placing it in read-only memory (.rodata) improves hardening,
particularly because it contains function pointers.
x86_64 (allmodconfig) size impact:
Before:
text data bss dec hex filename
13142 1808 0 14950 3a66 drivers/firmware/arm_scmi/voltage.o
After:
text data bss dec hex filename
13238 1712 0 14950 3a66 drivers/firmware/arm_scmi/voltage.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-Id: <2091660c072dd2d5599897243a5d69e89d46ed4d.1753816459.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Enable multiple SCMI instances by appending an instance-number suffix
to the 'scmi' node name. The SCMI spec assumes a single SCMI platform,
but in practice its responsibilities may be split across several SCMI
platform/server instances. However, only one instance can serve as the
system-wide (true) SCMI platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Signed-off-by: Deepti Jaggi <quic_djaggi@quicinc.com>
Message-Id: <20250730-8255-scmi-v6-1-a7d8ba19aded@quicinc.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
A recent lockdep[1] splat observed while running blktest block/005
reveals a potential deadlock caused by the cpu_hotplug_lock dependency
on ->freeze_lock. This dependency was introduced by commit 033b667a82
("block: blk-rq-qos: guard rq-qos helpers by static key").
That change added a static key to avoid fetching q->rq_qos when
neither blk-wbt nor blk-iolatency is configured. The static key
dynamically patches kernel text to a NOP when disabled, eliminating
overhead of fetching q->rq_qos in the I/O hot path. However, enabling
a static key at runtime requires acquiring both cpu_hotplug_lock and
jump_label_mutex. When this happens after the queue has already been
frozen (i.e., while holding ->freeze_lock), it creates a locking
dependency from cpu_hotplug_lock to ->freeze_lock, which leads to a
potential deadlock reported by lockdep [1].
To resolve this, replace the static key mechanism with q->queue_flags:
QUEUE_FLAG_QOS_ENABLED. This flag is evaluated in the fast path before
accessing q->rq_qos. If the flag is set, we proceed to fetch q->rq_qos;
otherwise, the access is skipped.
Since q->queue_flags is commonly accessed in IO hotpath and resides in
the first cacheline of struct request_queue, checking it imposes minimal
overhead while eliminating the deadlock risk.
This change avoids the lockdep splat without introducing performance
regressions.
[1] https://lore.kernel.org/linux-block/4fdm37so3o4xricdgfosgmohn63aa7wj3ua4e5vpihoamwg3ui@fq42f5q5t5ic/
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/linux-block/4fdm37so3o4xricdgfosgmohn63aa7wj3ua4e5vpihoamwg3ui@fq42f5q5t5ic/
Fixes: 033b667a82 ("block: blk-rq-qos: guard rq-qos helpers by static key")
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250814082612.500845-4-nilay@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
rq_qos_add() increments the block_rq_qos static key when a QoS
policy is attached. When a QoS policy is removed via rq_qos_del(),
we must symmetrically decrement the static key. If this removal drops
the last QoS policy from the queue (q->rq_qos becomes NULL), the
static branch can be disabled and the jump label patched to a NOP,
avoiding overhead on the hot path.
This change ensures rq_qos_add()/rq_qos_del() keep the
block_rq_qos static key balanced and prevents leaving the branch
permanently enabled after the last policy is removed.
Fixes: 033b667a82 ("block: blk-rq-qos: guard rq-qos helpers by static key")
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250814082612.500845-3-nilay@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a bio has BIO_QOS_THROTTLED or BIO_QOS_MERGED set,
it implicitly guarantees that q->rq_qos is present.
Avoid re-checking q->rq_qos in this case and call
__rq_qos_done_bio() directly as a minor optimization.
Suggested-by : Yu Kuai <yukuai1@huaweicloud.com>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250814082612.500845-2-nilay@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Update call sites in nova-core to import `ARef`
from `sync::aref` instead of `types`.
This aligns with the ongoing effort to move `ARef` and
`AlwaysRefCounted` to sync.
[acourbot@nvidia.com: use standard prefix for nova-core.]
Suggested-by: Benno Lossin <lossin@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1173
Signed-off-by: Shankari Anand <shankari.ak0208@gmail.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250820112846.9665-1-shankari.ak0208@gmail.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Current minimum required version of binutils is 2.30, which supports VPCLMULQDQ
instruction mnemonics.
Remove check for assembler support of VPCLMULQDQ instructions and all relevant
macros for conditional compilation.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/20250819085855.333380-3-ubizjak@gmail.com
pm_sleep_ptr() depends on CONFIG_PM_SLEEP while pm_ptr() depends on
CONFIG_PM. Since ST SSC4 implements runtime PM it makes sense using
pm_ptr() here.
For the same reason replace PM macros that use CONFIG_PM. Doing so
prevents from using __maybe_unused attribute of runtime PM functions.
Link: https://lore.kernel.org/lkml/CAMuHMdX9nkROkAJJ5odv4qOWe0bFTmaFs=Rfxsfuc9+DT-bsEQ@mail.gmail.com
Fixes: 6f8584a482 ("spi: st: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()")
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250820180310.9605-1-rgallaispou@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Eric Biggers <ebiggers@kernel.org> says:
This is a cleaned-up implementation of moving the i_crypt_info and
i_verity_info pointers out of 'struct inode' and into the fs-specific
part of the inode, as proposed previously by Christian at
https://lore.kernel.org/r/20250723-work-inode-fscrypt-v4-0-c8e11488a0e6@kernel.org/
The high-level concept is still the same: fs/crypto/ and fs/verity/
locate the pointer by adding an offset to the address of struct inode.
The offset is retrieved from fscrypt_operations or fsverity_operations.
I've cleaned up a lot of the details, including:
- Grouped changes into patches differently
- Rewrote commit messages and comments to be clearer
- Adjusted code formatting to be consistent with existing code
- Removed unneeded #ifdefs
- Improved choice and location of VFS_WARN_ON_ONCE() statements
- Added missing kerneldoc for ubifs_inode::i_crypt_info
- Moved field initialization to init_once functions when they exist
- Improved ceph offset calculation and removed unneeded static_asserts
- fsverity_get_info() now checks IS_VERITY() instead of v_ops
- fscrypt_put_encryption_info() no longer checks IS_ENCRYPTED(), since I
no longer think it's actually correct there.
- verity_data_blocks() now keeps doing a raw dereference
- Dropped fscrypt_set_inode_info()
- Renamed some functions
- Do offset calculation using int, so we don't rely on unsigned overflow
- And more.
* patches from https://lore.kernel.org/20250810075706.172910-1-ebiggers@kernel.org:
fsverity: check IS_VERITY() in fsverity_cleanup_inode()
fs: remove inode::i_verity_info
btrfs: move verity info pointer to fs-specific part of inode
f2fs: move verity info pointer to fs-specific part of inode
ext4: move verity info pointer to fs-specific part of inode
fsverity: add support for info in fs-specific part of inode
fs: remove inode::i_crypt_info
ceph: move crypt info pointer to fs-specific part of inode
ubifs: move crypt info pointer to fs-specific part of inode
f2fs: move crypt info pointer to fs-specific part of inode
ext4: move crypt info pointer to fs-specific part of inode
fscrypt: add support for info in fs-specific part of inode
fscrypt: replace raw loads of info pointer with helper function
Link: https://lore.kernel.org/20250810075706.172910-1-ebiggers@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Since getting the address of the fsverity_info has gotten a bit more
expensive, make fsverity_cleanup_inode() check for IS_VERITY() instead.
This avoids adding more overhead to non-verity files.
This assumes that verity info is never set when !IS_VERITY(), which is
currently true, but add a VFS_WARN_ON_ONCE() that asserts that. (This
of course defeats the optimization, but only when CONFIG_VFS_DEBUG=y.)
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/20250810075706.172910-14-ebiggers@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Now that all fsverity-capable filesystems store the pointer to
fsverity_info in the filesystem-specific part of the inode structure,
inode::i_verity_info is no longer needed. Update fsverity_info_addr()
to no longer support the fallback to inode::i_verity_info. Finally,
remove inode::i_verity_info itself, and move the forward declaration of
struct fsverity_info from fs.h (which no longer needs it) to fsverity.h.
The end result of the migration to the filesystem-specific pointer is
memory savings on CONFIG_FS_VERITY=y kernels for all filesystems that
don't support fsverity. Specifically, their in-memory inodes are now
smaller by the size of a pointer: either 4 or 8 bytes.
Co-developed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/20250810075706.172910-13-ebiggers@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Move the fsverity_info pointer into the filesystem-specific part of the
inode by adding the field btrfs_inode::i_verity_info and configuring
fsverity_operations::inode_info_offs accordingly.
This is a prerequisite for a later commit that removes
inode::i_verity_info, saving memory and improving cache efficiency on
filesystems that don't support fsverity.
Co-developed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/20250810075706.172910-12-ebiggers@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Move the fsverity_info pointer into the filesystem-specific part of the
inode by adding the field f2fs_inode_info::i_verity_info and configuring
fsverity_operations::inode_info_offs accordingly.
This is a prerequisite for a later commit that removes
inode::i_verity_info, saving memory and improving cache efficiency on
filesystems that don't support fsverity.
Co-developed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/20250810075706.172910-11-ebiggers@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Move the fsverity_info pointer into the filesystem-specific part of the
inode by adding the field ext4_inode_info::i_verity_info and configuring
fsverity_operations::inode_info_offs accordingly.
This is a prerequisite for a later commit that removes
inode::i_verity_info, saving memory and improving cache efficiency on
filesystems that don't support fsverity.
Co-developed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/20250810075706.172910-10-ebiggers@kernel.org
Acked-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add an inode_info_offs field to struct fsverity_operations, and update
fs/verity/ to support it. When set to a nonzero value, it specifies the
offset to the fsverity_info pointer within the filesystem-specific part
of the inode structure, to be used instead of inode::i_verity_info.
Since this makes inode::i_verity_info no longer necessarily used, update
comments that mentioned it.
This is a prerequisite for a later commit that removes
inode::i_verity_info, saving memory and improving cache efficiency on
filesystems that don't support fsverity.
Co-developed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/20250810075706.172910-9-ebiggers@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Now that all fscrypt-capable filesystems store the pointer to
fscrypt_inode_info in the filesystem-specific part of the inode
structure, inode::i_crypt_info is no longer needed. Update
fscrypt_inode_info_addr() to no longer support the fallback to
inode::i_crypt_info. Finally, remove inode::i_crypt_info itself along
with the now-unnecessary forward declaration of fscrypt_inode_info.
The end result of the migration to the filesystem-specific pointer is
memory savings on CONFIG_FS_ENCRYPTION=y kernels for all filesystems
that don't support fscrypt. Specifically, their in-memory inodes are
now smaller by the size of a pointer: either 4 or 8 bytes.
Co-developed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/20250810075706.172910-8-ebiggers@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Move the fscrypt_inode_info pointer into the filesystem-specific part of
the inode by adding the field ceph_inode_info::i_crypt_info and
configuring fscrypt_operations::inode_info_offs accordingly.
This is a prerequisite for a later commit that removes
inode::i_crypt_info, saving memory and improving cache efficiency with
filesystems that don't support fscrypt.
Co-developed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/20250810075706.172910-7-ebiggers@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Move the fscrypt_inode_info pointer into the filesystem-specific part of
the inode by adding the field ubifs_inode::i_crypt_info and configuring
fscrypt_operations::inode_info_offs accordingly.
This is a prerequisite for a later commit that removes
inode::i_crypt_info, saving memory and improving cache efficiency with
filesystems that don't support fscrypt.
Note that the initialization of ubifs_inode::i_crypt_info to NULL on
inode allocation is handled by the memset() in ubifs_alloc_inode().
Co-developed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/20250810075706.172910-6-ebiggers@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Move the fscrypt_inode_info pointer into the filesystem-specific part of
the inode by adding the field f2fs_inode_info::i_crypt_info and
configuring fscrypt_operations::inode_info_offs accordingly.
This is a prerequisite for a later commit that removes
inode::i_crypt_info, saving memory and improving cache efficiency with
filesystems that don't support fscrypt.
Co-developed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/20250810075706.172910-5-ebiggers@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Move the fscrypt_inode_info pointer into the filesystem-specific part of
the inode by adding the field ext4_inode_info::i_crypt_info and
configuring fscrypt_operations::inode_info_offs accordingly.
This is a prerequisite for a later commit that removes
inode::i_crypt_info, saving memory and improving cache efficiency with
filesystems that don't support fscrypt.
Co-developed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/20250810075706.172910-4-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add an inode_info_offs field to struct fscrypt_operations, and update
fs/crypto/ to support it. When set to a nonzero value, it specifies the
offset to the fscrypt_inode_info pointer within the filesystem-specific
part of the inode structure, to be used instead of inode::i_crypt_info.
Since this makes inode::i_crypt_info no longer necessarily used, update
comments that mentioned it.
This is a prerequisite for a later commit that removes
inode::i_crypt_info, saving memory and improving cache efficiency with
filesystems that don't support fscrypt.
Co-developed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/20250810075706.172910-3-ebiggers@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
