As part of
38a4968b31 ("x86/percpu/64: Remove INIT_PER_CPU macros"),
the only use of the config option X86_64_SMP in the kernel tree is removed. As
this config option X86_64_SMP is just equivalent to X86_64 && SMP, the source
code in the tree just uses that expression in the few places where needed. Note
further that this option cannot be explicitly enabled or disabled when
configuring the kernel build configuration.
Drop this needless and unused config option. No functional change.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250723071211.622802-1-lukas.bulwahn@redhat.com
irq_domain_create_simple() takes fwnode as the first argument. It can be
extracted from the struct device using dev_fwnode() helper instead of using
of_node with of_fwnode_handle().
So use the dev_fwnode() helper.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/20250723062631.1830757-1-jirislaby@kernel.org
So far we set a number of expected Allwinner USB PHY instances for any
given compatible string, and would fail if we do not find every PHY
described properly in the DT (missing reset/PMU/clocks).
This is somewhat redundant, as the DT only describes the resources for
the implemented PHYs, but goes in line with being strict about firmware
descriptions, and rather fixing things in the driver code, based on the
compatible string.
However this causes issues when we make a mistake, like we did recently
on the A523: there are actually three USB PHYs, not two, as we assumed.
Changing the number in the driver and the compatible string would cause
all kinds of compatibility issues, both with older and newer DTs.
To avoid problems with newer kernels and older or newer DTs, we can change
the driver code to deduce the number of PHY instances from what's
described in the DT. This has the added advantage of not requiring new
compatible strings for new SoCs when just the number of PHYs change, which
already happened and might occur again in the future.
Drop the num_phys member from the config struct, and remove the fixed
number of PHYs from each SoC's config description. Then enumerate the
usb<x>_reset properties for all of the maximum four PHY instances, and
just stop once we cannot find such a property anymore.
The binding describes the reset property as mandatory for each PHY
instance, and each DT in the kernel tree matches exactly the num_phys
value in the current driver code, so we can rely on that.
Apart from being more future proof, this will solve the A523 mishap:
Older DTs would just describe two PHYs, whereas newer ones would feature
all three of them. In any case we would get a valid number, matching the
other nodes in the DT. Older kernels would always enumerate two PHYs,
which at least does not cause any regressions.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20250819001522.13011-1-andre.przywara@arm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Extend the "Disable NULL query for Anyhit Shader" tuning to Xe2
(graphics version 2000+) platforms, in addition to Xe3.
This sets the DIS_NULL_QUERY bit in RT_CTRL to disable null query
for Anyhit shaders on both Xe2 and Xe3.
This is a change in behavior that can regress a userspace not
prepared for it. However it's not feasible to change dynamically
the option per client or per exec queue via an opt-in flag. Mesa
is already prepared for that and it got propagated to their
stable versions. Even if it was possible, at this point adding a
flag would mean mesa would also need to propagate such a flag to
their stable versions, otherwise the previous fix would not be
used.
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Link: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/35044
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/35044
Link: https://lore.kernel.org/r/20250819061151.1272622-1-nitin.r.gote@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Set the `support_hdcp` bit to enable the connector to register content
protection during initialization.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250812082135.3351172-3-fshao@chromium.org
Some bridges can update HDCP status based on userspace requests if they
support HDCP.
The HDCP property is created after connector initialization and before
registration, just like other connector properties.
Add the content protection property to the connector if a bridge
supports HDCP.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250812082135.3351172-2-fshao@chromium.org
Rename is_signed_type() to is_signed_var() to avoid colliding with a macro
of the same name defined by tools' linux/overflow.h. This fixes warnings
(and presumably potential test failures) in tests that utilize the
selftests harness and happen to (indirectly) include overflow.h.
In file included from tools/include/linux/bits.h:34,
from tools/include/linux/bitops.h:14,
from tools/include/linux/hashtable.h:13,
from include/kvm_util.h:11,
from x86/userspace_msr_exit_test.c:11:
tools/include/linux/overflow.h:31:9: error: "is_signed_type" redefined [-Werror]
31 | #define is_signed_type(type) (((type)(-1)) < (type)1)
| ^~~~~~~~~~~~~~
In file included from include/kvm_test_harness.h:11,
from x86/userspace_msr_exit_test.c:9:
../kselftest_harness.h:754:9: note: this is the location of the previous definition
754 | #define is_signed_type(var) (!!(((__typeof__(var))(-1)) < (__typeof__(var))1))
| ^~~~~~~~~~~~~~
Use a separate definition, at least for now, as many selftests build
without tools/include in their include path.
Fixes: fc92099902 ("tools headers: Synchronize linux/bits.h with the kernel sources")
Cc: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250624231930.583689-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
With pch_pic device, its register is based on MMIO address space,
different access size 1/2/4/8 is supported. And base address should
be naturally aligned with its access size, here add alignment check
in its register access emulation function.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Since using kvm_get_vcpu() may fail to retrieve the vCPU context,
kvm_get_vcpu_by_id() should be used instead.
Fixes: 8e3054261b ("LoongArch: KVM: Add IPI user mode read and write function")
Fixes: 3956a52bc0 ("LoongArch: KVM: Add EIOINTC read and write functions")
Reviewed-by: Yanteng Si <siyanteng@cqsoftware.com.cm>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add the flag KVM_LARCH_LBT checking in function kvm_own_lbt(), so that
it can be called safely rather than duplicated enabling again.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Fprobe event accepts wildcards for the target functions, but unless user
specifies its event name, it makes an event with the wildcards.
/sys/kernel/tracing # echo 'f mutex*' >> dynamic_events
/sys/kernel/tracing # cat dynamic_events
f:fprobes/mutex*__entry mutex*
/sys/kernel/tracing # ls events/fprobes/
enable filter mutex*__entry
To fix this, replace the wildcard ('*') with an underscore.
Link: https://lore.kernel.org/all/175535345114.282990.12294108192847938710.stgit@devnote2/
Fixes: 334e5519c3 ("tracing/probes: Add fprobe events for tracing function entry and exit.")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
GCC inlining heuristics prevent code growth due to inlining into cold
paths. This causes GCC to emit a partially specialized version of
__flogr for non-constant input for all occurrences on cold paths.
This happens since the overhead seen during inlining includes setting
up a union register_pair, calling flogr, and extracting and casting
the result. This overhead is not removed until the function is
lowered into RTL. But this happens after inlining.
For -ftrivial-var-auto-init=zero builds, an additional initialization
of the union register_pair adds another statement to be inlinined.
This is unneeded since the even register is initialized anyway and the
odd register is not an input register. It is only marked as such
since the whole pair has to be marked as a read/write output register.
Mark the union register_pair as uninitialized to get rid of this
statement. This, however, does not change the code since the
initialization happens when part of the register pair is written.
Nevertheless, GCC function size approximation during inlining is
reduced by one statement.
Force inlining of flogr and also flatten some other functions that
should be leaf functions but are called in cold context, like, e.g.,
__init functions.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Use a simpler algorithm to calculate the result of ffs() and fls64().
This generates slightly better code and increases readability.
Kernel image size is reduced by ~3kb (gcc 15.1.0 + defconfig).
Suggested-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
To improve readability and prepare for future extensions, move the
memory hotplug code to a separate file. In addtion to it, add required
headers in sclp_mem.c and remove unnecessary headers in sclp_cmd.c
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
To improve readability, refactor sclp_cmd.c:
* Move defines and structures to the beginning.
* Reverse x-mas tree usage.
* Remove spaces after casting to eliminate checkpatch warnings.
* Remove unnecessary comments.
* Reframe certain comments.
* Convert all unsigned long long to unsigned long since unsigned long
long is a leftover from the 31/32-bit era.
* Use correct format specifiers.
* Add braces to for loops with bodies containing more than one line.
* Sort header files and remove unnecessary ones.
* Use __packed and __aligned instead of __attribute((packed,
aligned(8))) in structures.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Since the identity mapping is pinned to address zero the lowcore is always
also mapped to address zero, this happens regardless of the relocate_lowcore
command line option. If the option is specified the lowcore is mapped
twice, instead of only once.
This means that NULL pointer accesses will succeed instead of causing an
exception (low address protection still applies, but covers only parts).
To fix this never map the first two pages of physical memory with the
identity mapping.
Fixes: 32db401965 ("s390/mm: Pin identity mapping base to zero")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tracing code called by the SCLP interrupt handler contains early exits
if the SCCB address associated with an interrupt is NULL. This check is
performed after physical to virtual address translation.
If the kernel identity mapping does not start at address zero, the
resulting virtual address is never zero, so that the NULL checks won't
work. Subsequently this may result in incorrect accesses to the first
page of the identity mapping.
Fix this by introducing a function that handles the NULL case before
address translation.
Fixes: ada1da31ce ("s390/sclp: sort out physical vs virtual pointers usage")
Cc: stable@vger.kernel.org
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Similar to powerpc set HZ to 1000. See also commit a206d23340
("powerpc/defconfigs: Set HZ=1000 on ppc64 and powernv defconfigs").
Besides other this will reduce the latency seen with synchronize_rcu().
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Production silicon for CS36L63 has some small differences compared to
pre-production silicon. Remove soundwire clock workaround as no
longer necessary. We don't want to do tricks with low-level clocking
controls if we don't need to.
Fixes: 978858791c ("ASoC: cs35l56: Add initial support for CS35L63 for I2C and SoundWire")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20250820142209.127575-4-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
CS35L63 uses different algorithm IDs from CS35L56.
Add a new mechanism to handle different alg IDs between parts in the
CS35L56 driver.
Fixes: 978858791c ("ASoC: cs35l56: Add initial support for CS35L63 for I2C and SoundWire")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20250820142209.127575-3-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Production silicon for CS36L63 has some small differences compared to
pre-production silicon. Update firmware addresses, which are different.
No product was ever released with pre-production silicon so there is no
need for the driver to include support for it.
Fixes: 978858791c ("ASoC: cs35l56: Add initial support for CS35L63 for I2C and SoundWire")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20250820142209.127575-2-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 57fbad15c2 ("stackleak: Rename STACKLEAK to KSTACK_ERASE")
misses the stackframe.h part for LoongArch, so fix it.
Fixes: 57fbad15c2 ("stackleak: Rename STACKLEAK to KSTACK_ERASE")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Now if preemption happens between protected_save_fpu_context() and
protected_save_lbt_context(), FTOP context is lost. Because FTOP is
saved by protected_save_lbt_context() but protected_save_fpu_context()
disables TM before that. So save LBT before FPU in setup_sigcontext()
to avoid this potential risk.
Signed-off-by: Hanlu Li <lihanlu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When enabling CONFIG_KASAN, CONFIG_PREEMPT_VOLUNTARY_BUILD and
CONFIG_PREEMPT_VOLUNTARY at the same time, there will be soft deadlock,
the relevant logs are as follows:
rcu: INFO: rcu_sched self-detected stall on CPU
...
Call Trace:
[<900000000024f9e4>] show_stack+0x5c/0x180
[<90000000002482f4>] dump_stack_lvl+0x94/0xbc
[<9000000000224544>] rcu_dump_cpu_stacks+0x1fc/0x280
[<900000000037ac80>] rcu_sched_clock_irq+0x720/0xf88
[<9000000000396c34>] update_process_times+0xb4/0x150
[<90000000003b2474>] tick_nohz_handler+0xf4/0x250
[<9000000000397e28>] __hrtimer_run_queues+0x1d0/0x428
[<9000000000399b2c>] hrtimer_interrupt+0x214/0x538
[<9000000000253634>] constant_timer_interrupt+0x64/0x80
[<9000000000349938>] __handle_irq_event_percpu+0x78/0x1a0
[<9000000000349a78>] handle_irq_event_percpu+0x18/0x88
[<9000000000354c00>] handle_percpu_irq+0x90/0xf0
[<9000000000348c74>] handle_irq_desc+0x94/0xb8
[<9000000001012b28>] handle_cpu_irq+0x68/0xa0
[<9000000001def8c0>] handle_loongarch_irq+0x30/0x48
[<9000000001def958>] do_vint+0x80/0xd0
[<9000000000268a0c>] kasan_mem_to_shadow.part.0+0x2c/0x2a0
[<90000000006344f4>] __asan_load8+0x4c/0x120
[<900000000025c0d0>] module_frob_arch_sections+0x5c8/0x6b8
[<90000000003895f0>] load_module+0x9e0/0x2958
[<900000000038b770>] __do_sys_init_module+0x208/0x2d0
[<9000000001df0c34>] do_syscall+0x94/0x190
[<900000000024d6fc>] handle_syscall+0xbc/0x158
After analysis, this is because the slow speed of loading the amdgpu
module leads to the long time occupation of the cpu and then the soft
deadlock.
When loading a module, module_frob_arch_sections() tries to figure out
the number of PLTs/GOTs that will be needed to handle all the RELAs. It
will call the count_max_entries() to find in an out-of-order date which
counting algorithm has O(n^2) complexity.
To make it faster, we sort the relocation list by info and addend. That
way, to check for a duplicate relocation, it just needs to compare with
the previous entry. This reduces the complexity of the algorithm to O(n
log n), as done in commit d4e0340919 ("arm64/module: Optimize module
load time by optimizing PLT counting"). This gives sinificant reduction
in module load time for modules with large number of relocations.
After applying this patch, the soft deadlock problem has been solved,
and the kernel starts normally without "Call Trace".
Using the default configuration to test some modules, the results are as
follows:
Module Size
ip_tables 36K
fat 143K
radeon 2.5MB
amdgpu 16MB
Without this patch:
Module Module load time (ms) Count(PLTs/GOTs)
ip_tables 18 59/6
fat 0 162/14
radeon 54 1221/84
amdgpu 1411 4525/1098
With this patch:
Module Module load time (ms) Count(PLTs/GOTs)
ip_tables 18 59/6
fat 0 162/14
radeon 22 1221/84
amdgpu 45 4525/1098
Fixes: fcdfe9d22b ("LoongArch: Add ELF and module support")
Signed-off-by: Kanglong Wang <wangkanglong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When the CPU is offline, the timer of LoongArch is not correctly closed.
This is harmless for real machines, but resulting in an excessively high
cpu usage rate of the offline vCPU thread in the virtual machines.
To correctly close the timer, we have made the following modifications:
Register the cpu hotplug event (CPUHP_AP_LOONGARCH_ARCH_TIMER_STARTING)
for LoongArch. This event's hooks will be called to close the timer when
the CPU is offline.
Clear the timer interrupt when the timer is turned off. Since before the
timer is turned off, there may be a timer interrupt that has already been
in the pending state due to the interruption of the disabled, which also
affects the halt state of the offline vCPU.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The default COMMAND_LINE_SIZE of 512, inherited from asm-generic, is
too small for modern use cases. For example, kdump configurations or
extensive debugging parameters can easily exceed this limit.
Therefore, increase the command line size to 4096 bytes, aligning
LoongArch with the MIPS architecture. This change follows a broader
trend among architectures to raise this limit to support modern needs;
for instance, PowerPC increased its value for similar reasons in the
commit a5980d064f ("powerpc: Bump COMMAND_LINE_SIZE to 2048").
Similar to the change made for RISC-V in the commit 61fc1ee8be
("riscv: Bump COMMAND_LINE_SIZE value to 1024"), this is considered
a safe change. The broader kernel community has reached a consensus
that modifying COMMAND_LINE_SIZE from UAPI headers does not constitute
a uABI breakage, as well-behaved userspace applications should not
rely on this macro.
Suggested-by: Huang Cun <cunhuang@tencent.com>
Signed-off-by: Ming Wang <wangming01@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When compiling with LLVM and CONFIG_LTO_CLANG is set, there exist many
objtool warnings "sibling call from callable instruction with modified
stack frame".
For this special case, the related object file shows that there is no
generated relocation section '.rela.discard.tablejump_annotate' for the
table jump instruction jirl, thus objtool can not know that what is the
actual destination address.
It needs to do something on the LLVM side to make sure that there is the
relocation section '.rela.discard.tablejump_annotate' if LTO is enabled,
but in order to maintain compatibility for the current LLVM compiler,
this can be done in the kernel Makefile for now. Ensure it is aware of
linker with LTO, '--loongarch-annotate-tablejump' needs to be passed via
'-mllvm' to ld.lld.
Note that it should also pass the compiler option -mannotate-tablejump
rather than only pass '-mllvm --loongarch-annotate-tablejump' to ld.lld
if LTO is enabled, otherwise there are no jump info for some table jump
instructions.
Fixes: e20ab7d454 ("LoongArch: Enable jump table for objtool")
Closes: https://lore.kernel.org/loongarch/20250731175655.GA1455142@ax162/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Co-developed-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When compiling with LLVM and CONFIG_LTO_CLANG is set, there exist many
objtool warnings "sibling call from callable instruction with modified
stack frame".
For this special case, the related object file shows that there is no
generated relocation section '.rela.discard.tablejump_annotate' for the
table jump instruction jirl, thus objtool can not know that what is the
actual destination address.
It needs to do something on the LLVM side to make sure that there is the
relocation section '.rela.discard.tablejump_annotate' if LTO is enabled,
but in order to maintain compatibility for the current LLVM compiler,
this can be done in the kernel Makefile for now. Ensure it is aware of
linker with LTO, '--loongarch-annotate-tablejump' needs to be passed via
'-mllvm' to ld.lld.
Before doing the above changes, it should handle the special case of the
relocation section '.rela.discard.tablejump_annotate' to get the correct
table size first, otherwise there are many objtool warnings and errors
if LTO is enabled.
There are many different rodata for each function if LTO is enabled, it
is necessary to enhance get_rodata_table_size_by_table_annotate().
Fixes: b95f852d3a ("objtool/LoongArch: Add support for switch table")
Closes: https://lore.kernel.org/loongarch/20250731175655.GA1455142@ax162/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Convert the legacy TXT binding for the OMAP TWL4030 sound card
to the modern YAML DT schema format. This adds formal validation
and improves documentation.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250819201302.80712-3-jihed.chaibi.dev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the TWL4030 audio module bindings from txt to YAML format and
move them to the sound subsystem bindings directory. This patch also
refines the schema by adding an enum constraint for ti,enable-vibra and
updates the example to remove irrelevant I2C clock-frequency property.
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250819201302.80712-2-jihed.chaibi.dev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use devm_kcalloc() in test_driver_probe() to gain built-in overflow
protection, making memory allocation safer when calculating allocation
size compared to explicit multiplication.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Link: https://patch.msgid.link/20250820123423.470486-4-rongqianfeng@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use devm_kcalloc() in fsl_sai_read_dlcfg() and imx_audmux_probe() to gain
built-in overflow protection, making memory allocation safer when
calculating allocation size compared to explicit multiplication.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Link: https://patch.msgid.link/20250820123423.470486-3-rongqianfeng@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use devm_kcalloc() in fs_parse_scene_tables() and pcmdev_gain_ctrl_add()
to gain built-in overflow protection, making memory allocation safer when
calculating allocation size compared to explicit multiplication.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Link: https://patch.msgid.link/20250820123423.470486-2-rongqianfeng@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The kernel is not supported to run as a Xen guest on Xen versions
older than 4.0.
Remove xen_strict_xenbus_quirk() which is testing the Xen version to be
at least 4.0.
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250815074052.13792-1-jgross@suse.com>
Replace the manual bitwise conversion of bytes to MB with
SZ_1M macro, a standard macro used within the mm subsystem,
to improve readability.
Signed-off-by: Pratyush Brahma <pratyush.brahma@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250820-numa-memblks-refac-v2-1-43bf1af02acd@oss.qualcomm.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
The security-version-number check should be used rather
than the runtime version check for driver updates.
Otherwise, the firmware update would fail when the update binary had
a lower runtime version number than the current one.
Fixes: 0db89fa243 ("ACPI: Introduce Platform Firmware Runtime Update device driver")
Cc: 5.17+ <stable@vger.kernel.org> # 5.17+
Reported-by: "Govindarajulu, Hariganesh" <hariganesh.govindarajulu@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Link: https://patch.msgid.link/20250722143233.3970607-1-yu.c.chen@intel.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This warning was triggered during testing on v6.16:
notifier callback ftrace_suspend_notifier_call already registered
WARNING: CPU: 2 PID: 86 at kernel/notifier.c:23 notifier_chain_register+0x44/0xb0
...
Call Trace:
<TASK>
blocking_notifier_chain_register+0x34/0x60
register_ftrace_graph+0x330/0x410
ftrace_profile_write+0x1e9/0x340
vfs_write+0xf8/0x420
? filp_flush+0x8a/0xa0
? filp_close+0x1f/0x30
? do_dup2+0xaf/0x160
ksys_write+0x65/0xe0
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x77/0x7f
When writing to the function_profile_enabled interface, the notifier was
not unregistered after start_graph_tracing failed, causing a warning the
next time function_profile_enabled was written.
Fixed by adding unregister_pm_notifier in the exception path.
Link: https://lore.kernel.org/20250818073332.3890629-1-yeweihua4@huawei.com
Fixes: 4a2b8dda3f ("tracing/function-graph-tracer: fix a regression while suspend to disk")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ye Weihua <yeweihua4@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When the length of the string written to set_ftrace_filter exceeds
FTRACE_BUFF_MAX, the following KASAN alarm will be triggered:
BUG: KASAN: slab-out-of-bounds in strsep+0x18c/0x1b0
Read of size 1 at addr ffff0000d00bd5ba by task ash/165
CPU: 1 UID: 0 PID: 165 Comm: ash Not tainted 6.16.0-g6bcdbd62bd56-dirty
Hardware name: linux,dummy-virt (DT)
Call trace:
show_stack+0x34/0x50 (C)
dump_stack_lvl+0xa0/0x158
print_address_description.constprop.0+0x88/0x398
print_report+0xb0/0x280
kasan_report+0xa4/0xf0
__asan_report_load1_noabort+0x20/0x30
strsep+0x18c/0x1b0
ftrace_process_regex.isra.0+0x100/0x2d8
ftrace_regex_release+0x484/0x618
__fput+0x364/0xa58
____fput+0x28/0x40
task_work_run+0x154/0x278
do_notify_resume+0x1f0/0x220
el0_svc+0xec/0xf0
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1ac/0x1b0
The reason is that trace_get_user will fail when processing a string
longer than FTRACE_BUFF_MAX, but not set the end of parser->buffer to 0.
Then an OOB access will be triggered in ftrace_regex_release->
ftrace_process_regex->strsep->strpbrk. We can solve this problem by
limiting access to parser->buffer when trace_get_user failed.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250813040232.1344527-1-pulehui@huaweicloud.com
Fixes: 8c9af478c0 ("ftrace: Handle commands when closing set_ftrace_filter file")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add missing LIBBPF_API macro for bpf_object__prepare function to enable
its export. libbpf.map had bpf_object__prepare already listed.
Fixes: 1315c28ed8 ("libbpf: Split bpf object load into prepare/load")
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250819215119.37795-1-mykyta.yatsenko5@gmail.com
After the V!=R rework (commit c98d2ecae0 ("s390/mm: Uncouple physical
vs virtual address spaces")), all kernel code and related data are
allocated within a 4G region, making it possible to use relative
addressing in BPF code more extensively.
Convert as many indirect calls and jumps to direct calls as possible,
namely:
* BPF_CALL
* __bpf_tramp_enter()
* __bpf_tramp_exit()
* __bpf_prog_enter()
* __bpf_prog_exit()
* fentry
* fmod_ret
* fexit
* BPF_TRAMP_F_CALL_ORIG without BPF_TRAMP_F_ORIG_STACK
* Trampoline returns without BPF_TRAMP_F_SKIP_FRAME and
BPF_TRAMP_F_ORIG_STACK
The following indirect calls and jumps remain:
* Prog returns
* Trampoline returns with BPF_TRAMP_F_SKIP_FRAME or
BPF_TRAMP_F_ORIG_STACK
* BPF_TAIL_CALL
* BPF_TRAMP_F_CALL_ORIG with BPF_TRAMP_F_ORIG_STACK
As a result, only one usage of call_r1() remains, so inline it.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250819102116.252203-1-iii@linux.ibm.com
nft_pipapo_scratch is a per-CPU variable and relies on disabled BH for
its locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Add a local_lock_t to the data structure and use local_lock_nested_bh() for
locking. This change adds only lockdep coverage and does not alter the
functional behaviour for !PREEMPT_RT.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
The struct nft_pipapo_scratch is allocated, then aligned to the required
alignment and difference (in bytes) is then saved in align_off. The
aligned pointer is used later.
While this works, it gets complicated with all the extra checks if
all member before map are larger than the required alignment.
Instead of saving the aligned pointer, just save the returned pointer
and align the map pointer in nft_pipapo_lookup() before using it. The
alignment later on shouldn't be that expensive. With this change, the
align_off can be removed and the pointer can be passed to kfree() as is.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Always prefer the avx2 implementation if its available.
This greatly improves insertion performance (each insertion
checks if the new element would overlap with an existing one):
time nft -f - <<EOF
table ip pipapo {
set s {
typeof ip saddr . tcp dport
flags interval
size 800000
elements = { 10.1.1.1 - 10.1.1.4 . 3996,
[.. 800k entries elided .. ]
before:
real 1m55.993s
user 0m2.505s
sys 1m53.296s
after:
real 0m42.586s
user 0m2.554s
sys 0m39.811s
Fold patch from Sebastian:
kernel_fpu_begin_mask()/ _end() remains in pipapo_get_avx2() where it is
required.
A followup patch will add local_lock_t to struct nft_pipapo_scratch in
order to protect the map pointer. The lock can not be acquired in
preemption disabled context which is what kernel_fpu_begin*() does.
Link: https://lore.kernel.org/netfilter-devel/20250818110213.1319982-2-bigeasy@linutronix.de/
Co-developed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Split the main avx2 lookup function into a helper.
This is a preparation patch: followup change will use the new helper
from the insertion path if possible. This greatly improves insertion
performance when avx2 is supported.
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
The comment claims that the kernel_fpu_begin_mask() below protects
access to the scratch map. This is not true because the access is only
protected by local_bh_disable() above.
Remove the misleading comment.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
