Add support for configuring the PFC_OEN register on the RZ/G3E SoC to
enable output-enable control for specific pins. On this SoC, certain
pins such as TXC_TXCLK need to support switching between input and
output modes depending on the PHY interface mode (e.g., MII vs RGMII).
This functionality maps to the 'output-enable' property in the device
tree and requires explicit control via the PFC_OEN register.
This change updates the r9a09g047_variable_pin_cfg array to mark PB1, PE1,
PL0, PL1, PL2, and PL4 with the PIN_CFG_OEN flag to indicate output-enable
support. A new helper, rzg3e_pin_to_oen_bit(), is introduced to map these
pin names to their respective OEN bit positions, and the corresponding
callbacks are wired into the RZ/G3E SoC configuration using the generic
rzg2l_read_oen() and rzg2l_write_oen() accessors. Additionally, the GPIO
configuration for the PB, PE, and PL ports is updated to use the variable
port pack macro, enabling per-pin configuration necessary for OEN handling.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250806195555.1372317-7-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Unify the OEN handling on RZ/V2H(P) and RZ/V2N SoCs by reusing the existing
rzg2l_read_oen and rzg2l_write_oen functions from RZ/G2L. Add a
pin_to_oen_bit callback in rzg2l_pinctrl_data to look up per-pin OEN bit
positions, and introduce an oen_pwpr_lock flag in the hwcfg to manage PWPR
locking on SoCs that require it (RZ/V2H(P) family). Remove the hardcoded
PFC_OEN define and obsolete per-SoC OEN helpers.
Also drop redundant checks for the OEN offset in the suspend/resume paths,
as all supported SoCs now provide a valid offset through the `regs.oen`
field.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250806195555.1372317-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The RZ/G3E pin controller does not advertise PIN_CFG_OEN capability, so
there is no valid mapping for output-enable bits on this SoC. Remove the
oen_read and oen_write callbacks from the RZ/G3E driver data to defer
OEN support until PIN_CFG_OEN support is added.
This is a preparatory change for future unification of OEN handling across
the driver.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250806195555.1372317-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Refactor the RZG2L pinctrl driver to support reuse of the common
rzg2l_read_oen() and rzg2l_write_oen() helpers across SoCs with
different output-enable (OEN) bit mappings.
Introduce a new `pin_to_oen_bit` callback in `struct rzg2l_pinctrl_data`
to allow SoCs to provide custom logic for mapping a pin to its OEN bit.
Update the generic OEN read/write paths to use this callback when present.
With this change, SoCs like RZ/G3S can reuse the common OEN handling
code by simply supplying their own `pin_to_oen_bit` implementation.
The previously duplicated `rzg3s_oen_read()` and `rzg3s_oen_write()`
functions are now removed.
This improves maintainability and prepares the driver for supporting
future SoCs with minimal duplication.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250806195555.1372317-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Prepare for supporting SoCs with varying OEN register locations by
parameterizing the OEN offset in the rzg2l driver. Introduce an `oen`
field in the rzg2l_register_offsets structure and update rzg2l_read_oen(),
rzg2l_write_oen(), suspend/resume caching, and SoC hwcfg entries to use
this offset instead of the hard-coded ETH_MODE value.
As part of this change, rename the field `eth_mode` in the register cache
to `oen` to better reflect its general purpose and decouple the naming
from a specific register.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250806195555.1372317-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
rzg3s_oen_read() returns a u32 value, but previously propagated a negative
error code from rzg3s_pin_to_oen_bit(), resulting in an unintended large
positive value due to unsigned conversion. This caused incorrect
output-enable reporting for certain pins.
Without this patch, pins P1_0-P1_4 and P7_0-P7_4 are incorrectly reported
as "output enabled" in the pinconf-pins debugfs file. With this fix, only
P1_0-P1_1 and P7_0-P7_1 are shown as "output enabled", which matches the
hardware manual.
Fix this by returning 0 when the OEN bit lookup fails, treating the pin
as output-disabled by default.
Fixes: a9024a323a ("pinctrl: renesas: rzg2l: Clean up and refactor OEN read/write functions")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250709160819.306875-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Commit 16f5dfbc85 ("gfp: include __GFP_NOWARN in GFP_NOWAIT")
made GFP_NOWAIT implicitly include __GFP_NOWARN.
Therefore, explicit __GFP_NOWARN combined with GFP_NOWAIT
(e.g., `GFP_NOWAIT | __GFP_NOWARN`) is now redundant. Let's clean
up these redundant flags across subsystems.
No functional changes.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250805023222.332920-1-rongqianfeng@vivo.com
Convert a goto-based loop to a while() loop. To allow the simplification,
return early when allocation from CMA is successful. As a bonus, this early
return avoids a repeated dma_coherent_ok() check.
No functional change.
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250710083829.1853466-1-ptesarik@suse.com
When `devm_add_action_or_reset()` fails, it is due to a failed memory
allocation and will thus return `-ENOMEM`. `dev_err_probe()` doesn't do
anything when error is `-ENOMEM`. Therefore, remove the useless call to
`dev_err_probe()` when `devm_add_action_or_reset()` fails, and just
return the value instead.
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://lore.kernel.org/r/pndjz3im7te.a.out@axis.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
These changes just fix Linux Kernel Coding Style, no functional
improve.
-Macros with complex values should be enclosed in parentheses
Signed-off-by: Li Jun <lijun01@kylinos.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250731091637.595136-1-lijun01@kylinos.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add the necessary boilerplate to also make this driver modular.
Keep the subsys_initcall to not change registration order for built-in.
Also add OF match table for module autoloading.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20250728060544.18169-1-alexander.stein@ew.tq-group.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Now that the binding head has been merged, convert the power-domain ids
back to these constants for easier handling.
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250620201715.1572609-1-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The NPU on the ROCK5B uses the same regulator for both the sram-supply
and the npu's supply. Add this regulator, and enable all the NPU bits.
Also add the regulator as a domain-supply to the pd_npu power domain.
v8:
- Remove notion of top core (Robin Murphy)
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://lore.kernel.org/r/20250721-6-10-rocket-v9-10-77ebd484941e@tomeuvizoso.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
See Chapter 36 "RKNN" from the RK3588 TRM (Part 1).
The IP is divided in three cores, programmed independently. The first
core though is special, being able to delegate work to the other cores.
The IOMMU of the first core is also special in that it has two subunits
(read/write?) that need to be programmed in sync.
v2:
- Have one device for each NPU core (Sebastian Reichel)
- Have one device for each IOMMU (Sebastian Reichel)
- Correctly sort nodes (Diederik de Haas)
- Add rockchip,iommu compatible to IOMMU nodes (Sebastian Reichel)
v3:
- Adapt to a split of the register block in the DT bindings (Nicolas
Frattaroli)
v4:
- Adapt to changes in bindings
v6:
- pclk and npu clocks are needed by all clocks (Rob Herring)
v8:
- Remove notion of top core (Robin Murphy)
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://lore.kernel.org/r/20250721-6-10-rocket-v9-8-77ebd484941e@tomeuvizoso.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The NPU of the RK3588 has an external supply. This supply also affects
the power domain of the NPU, not just the NPU device nodes themselves.
Since correctly modelled boards will want the power domain to be aware
of the regulator so that it doesn't always have to be on, add a label to
the NPU power domain node so board files can reference it.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://lore.kernel.org/r/20250721-6-10-rocket-v9-7-77ebd484941e@tomeuvizoso.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add TAS5825 support in TI's HDA driver.
TAS5825 is an on-chip DSP, but no calibration is required,
and no global address support smart amplifier devices.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250810122358.1575-1-baojun.xu@ti.com
Framework Laptop 13 (AMD Ryzen AI 300) requires the same quirk for
headset detection as other Framework 13 models.
Signed-off-by: Christopher Eby <kreed@kreed.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250810030006.9060-1-kreed@kreed.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Register cpu pm notifiers for gs101 which call the
gs101_cpu_pmu_online/offline callbacks which in turn program the ACPM
C2 hint. This hint is required to actually enter the C2 idle state in
addition to the PSCI calls due to limitations in the el3mon/ACPM firmware.
A couple of corner cases are handled, namely when the system is rebooting
or suspending we ignore the request. Additionally the request is ignored if
the CPU is in CPU hot plug. Some common code is refactored so that it can
be called from both the CPU hot plug callbacks and CPU PM notifier taking
into account that CPU PM notifiers are called with IRQs disabled whereas
CPU hotplug callbacks are not.
Additionally due to CPU PM notifiers using raw_spinlock the locking is
updated to use raw_spinlock variants, this includes updating the pmu_regs
regmap to use .use_raw_spinlock = true and additionally creating and
registering a custom pmu-intr-gen regmap instead of using the regmap
provided by syscon.
Note: this patch has a runtime dependency on adding 'local-timer-stop' dt
property to the CPU nodes. This informs the time framework to switch to a
broadcast timer as the local timer will be shutdown. Without that DT
property specified the system hangs in early boot with this patch applied.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250717-gs101-cpuidle-v7-1-33d51770114b@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
As described in the pinebookpro_v2.1_mainboard_schematic.pdf page 10,
he SPI Flash's VCC connector is connected to VCC_3V0 power source.
This fixes the following warning:
spi-nor spi1.0: supply vcc not found, using dummy regulator
Fixes: 5a65505a69 ("arm64: dts: rockchip: Add initial support for Pinebook Pro")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20250730102129.224468-1-pbrobinson@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
IPQ5424 have different OPPs available for the CPU based on
SoC variant. This can be determined through use of an eFuse
register present in the silicon.
Added support for ipq5424 on nvmem driver which helps to
determine OPPs at runtime based on the eFuse register which
has the CPU frequency limits. opp-supported-hw dt binding
can be used to indicate the available OPPs for each limit.
nvmem driver also creates the "cpufreq-dt" platform_device after
passing the version matching data to the OPP framework so that the
cpufreq-dt handles the actual cpufreq implementation.
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
[ Changed '!=' based check to '==' based check ]
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Thanks to Heiko's work getting OTP working on the RK3576, we can specify
the thermal sensor trim values which are stored there now, and with my
driver addition to rockchip_thermal, we can make use of these.
Add them to the devicetree for the SoC.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250610-rk3576-tsadc-upstream-v6-7-b6e9efbf1015@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the TSADC node to the RK3576. Additionally, add everything the TSADC
needs to function, i.e. thermal zones, their trip points and maps, as
well as adjust the CPU cooling-cells property.
The polling-delay properties are set to 0 as we do have interrupts for
this TSADC on this particular SoC, though the polling-delay-passive
properties are set to 100 for the thermal zones that have a passive
cooling device, as otherwise the thermal throttling behaviour never
unthrottles.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250610-rk3576-tsadc-upstream-v6-6-b6e9efbf1015@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The eeprom on the Radxa E52C SBC contains manufacturer data
such as the mac address, so it should be marked as read-only.
Fixes: 9be4171219 ("arm64: dts: rockchip: Add Radxa E52C")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20250810100020.445053-2-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The NICs have default-trigger of "netdev" in order to show up as
LAN/WAN connected, so their default-state should be set to "off".
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20250810100020.445053-3-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
New Airoha AN7583 SoC use the same exact logic to control the CPU
frequency. Add the Device compatible to the block list for
cpufreq-dt-plat and to the Airoha CPUFreq driver compatible list.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The MT8196 SoC uses DVFS to set a desired target frequency for each CPU
core. It also uses slightly different register offsets.
Add support for it, which necessitates reworking how the mmio regs are
acquired, as mt8196 has the fdvfs register before the performance domain
registers.
I've verified with both `sysbench cpu run` and `head -c 10G \
/dev/urandom | pigz -p 8 -c - | pv -ba > /dev/null` that we don't just
get a higher reported clock frequency, but that the observed performance
also increases, by a factor of 2.64 in an 8 thread sysbench test.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogiaocchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
As it stood, the mediatek cpufreq driver could get away with never
really having a private driver instance struct. This is because all data
was stored in the per-domain structs.
However, this complicates matters when actual per-instance data like the
variant struct is introduced. Instead of having a pointer to it for
every domain, have a pointer to a global "priv" struct that can be
extended over time, and rename the "data" struct to "domain" to
distinguish its purpose better.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
While the driver could get away with having the per-compatible match
data just be an array of the reg offsets, the only thing it used it for
right now, this doesn't really allow it to be extended in any meaningful
way if some other per-variant information needs to be communicated.
In preparation of adding support for hybrid "FDVFS" for MT8196, refactor
the code to make the DT match data a struct, which currently only
contains a single member: the reg offsets. This will allow this struct
to be extended with other members for other hardware variants.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The MediaTek MT8196 SoC has new cpufreq hardware, with added memory
register ranges to control Dynamic-Voltage-Frequency-Scaling.
The DVFS hardware is controlled through a set of registers referred to
as "FDVFS". They set the target frequency the DVFS hardware should aim
for for each performance domain.
Instead of working around the old binding and its already established
meanings for the reg items, add a new binding. The FDVFS register memory
region is at the beginning, which allows us to easily expand this
binding for future SoCs which may have more than 3 performance domains.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Use the hmac_sha256_usingrawkey() library function instead of the
"hmac(sha256)" crypto_shash. This is simpler and faster.
As a cleanup, change the input data parameters from "challenge,
sizeof(hmac)" to "challenge, sizeof(challenge)", so that the size is
being taken of the correct buffer. This is not a functional change,
since it happens that sizeof(hmac) == sizeof(challenge).
Replace the selection of CRYPTO and CRYPTO_HASH with CRYPTO_LIB_SHA256
and CRYPTO_LIB_UTILS. The latter is needed for crypto_memneq() which
was previously being pulled in via CRYPTO.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
To prevent timing attacks, HMAC value comparison needs to be constant
time. Replace the memcmp() with the correct function, crypto_memneq().
Fixes: f67cf49117 ("thunderbolt: Add support for Internal Connection Manager (ICM)")
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
When we don't have a clock specified in the device tree, we have no way to
ensure the BAM is on. This is often the case for remotely-controlled or
remotely-powered BAM instances. In this case, we need to read num-channels
from the DT to have all the necessary information to complete probing.
However, at the moment invalid device trees without clock and without
num-channels still continue probing, because the error handling is missing
return statements. The driver will then later try to read the number of
channels from the registers. This is unsafe, because it relies on boot
firmware and lucky timing to succeed. Unfortunately, the lack of proper
error handling here has been abused for several Qualcomm SoCs upstream,
causing early boot crashes in several situations [1, 2].
Avoid these early crashes by erroring out when any of the required DT
properties are missing. Note that this will break some of the existing DTs
upstream (mainly BAM instances related to the crypto engine). However,
clearly these DTs have never been tested properly, since the error in the
kernel log was just ignored. It's safer to disable the crypto engine for
these broken DTBs.
[1]: https://lore.kernel.org/r/CY01EKQVWE36.B9X5TDXAREPF@fairphone.com/
[2]: https://lore.kernel.org/r/20230626145959.646747-1-krzysztof.kozlowski@linaro.org/
Cc: stable@vger.kernel.org
Fixes: 48d163b1aa ("dmaengine: qcom: bam_dma: get num-channels and num-ees from dt")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250212-bam-dma-fixes-v1-8-f560889e65d8@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
num-channels and qcom,num-ees are required when there are no clocks
specified in the device tree, because we have no reliable way to read them
from the hardware registers if we cannot ensure the BAM hardware is up when
the device is being probed.
This has often been forgotten when adding new SoC device trees, so make
this clear by describing this requirement in the schema.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250212-bam-dma-fixes-v1-7-f560889e65d8@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Remove unnecessary dev_set_drvdata() calls - driver_data will be set to
NULL in device_unbind_cleanup() at driver exit time.
This allows us to remove the 'err_initial' label, simplifying the probe
function a bit.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Link: https://lore.kernel.org/r/20250808204831.2618122-1-ovidiu.panait.oss@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added spaces where prefered or required by the checkpatch.pl script to
adhere codestyle.
Signed-off-by: Jannik Rehkemper <jannik@jrehkemper.de>
Link: https://lore.kernel.org/r/20250807185436.853318-2-jannik@jrehkemper.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the function rtw_reset_securitypriv from os_dep/mlme_linux.c to
core/rtw_mlme.c to reduce code in the os_dep directory.
The file os_dep/mlme_linux.c is finally empty now and we can remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250801083131.82915-9-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the function rtw_report_sec_ie from os_dep/mlme_linux.c to
core/rtw_mlme.c to reduce code in the os_dep directory.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250801083131.82915-8-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge the functionality of the function rtw_os_indicate_disconnect into the
function rtw_indicate_disconnect to reduce code in the os_dep directory.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250801083131.82915-7-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge the functionality of the function rtw_os_indicate_connect into the
function rtw_indicate_connect to reduce code in the os_dep directory.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250801083131.82915-6-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function init_addba_retry_timer is just a wrapper around timer_setup.
Remove the wrapper and use timer_setup directly.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250801083131.82915-5-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
