This release we have one new feature, support for chips that report edge
interrupts but don't provide distinct readback of that status per line,
plus a few cleanups.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmgzCB8ACgkQJNaLcl1U
h9Afygf/YAoq/f8qgQXEVAam10UTAB2utkM6Vgm9RM6U7duyn9ky5mg+/46P2Bjo
UUevRfDs/rW3WlGY9EYc/cHTxTqXOgj/SF3oIVDXz5QUvr31WS1lFpWs48lduPkH
GqiqZs12AD3v+iqCRk0UU95/OwylY8Vv2PmTZ14iZwLvuFLRazLztDTc89UE2op6
ld28gwNs9LK4TWA+qN3/+4zW3w5dcjaus/Xclccv+C+mE0Bv7BNCMHUTIDS84D+D
Fjh3hkJx4LpcoZlRVxR+bg16mvrA7fwjk4LH3Ipa4yjF1HRacbrWpoV6NIFXK/au
jpEQPBHf5Rv92hRZBwUNAf9YqYW30w==
=B8/l
-----END PGP SIGNATURE-----
Merge tag 'regmap-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This release we have one new feature, support for chips that report
edge interrupts but don't provide distinct readback of that status per
line, plus a few cleanups"
* tag 'regmap-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: irq: Add support for chips without separate IRQ status
regmap-irq: Use dedicated interrupt wake setters
regmap: Move selecting for REGMAP_MDIO and REGMAP_IRQ
regcache: Use sort()'s default swap() implementation
GPIO core:
- use more lock guards where applicable
- refactor GPIO ACPI code and shrink it in the process by 8%
- move GPIO ACPI quirks into a separate file
- remove unneeded #ifdef
- convert GPIO devres helpers to using devm_add_action() where applicable
which shrinks and simplifies the code
- refactor GPIO descriptor validation in GPIO consumer interfaces
- don't allow setting values on input lines in the GPIO core which will
take off the burden from GPIO drivers of checking this down the line
- provide gpiod_is_equal() as a way of safely comparing two GPIO
descriptors (the only current user is in regulator core)
New drivers:
- add the GPIO module for the max77759 multifunction device
- add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller
- add the GPIO driver for the Spacemit K1 SoC
Driver improvements:
- convert more drivers to using the new GPIO line value setter callbacks
- convert more drivers to making the irq_chip immutable as is recommended
by the interrupt subsystem
- extend build testing coverage by enabling more modules to be built with
COMPILE_TEST=y
- extend the gpio-aggregator module with a configfs interface that makes
the setup easier for user-space than the existing driver-level sysfs
attributes and also adds more advanced configuration features (such as
referring to aggregated lines by their original names or modifying
their names as exposed by the aggregated chip)
- add a missing mutex_destroy() in gpio-imx-scu
- add an OF polarity quirk for s5m8767
- allow building gpio-vf610 as a loadable module
- make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS
interface disabled (another small step towards getting rid of the global
GPIO numberspace)
- add support for level-triggered interrupts to gpio-pca953x
- don't double-check the ngpios property in gpio-ds4520 as GPIO core
already does it
- don't double-check the number of GPIOs in gpio-imx-scu as GPIO core
already does it
- remove unused callbacks from gpio-max3191x
DT bindings:
- add device-tree bindings for max77759, spacemit,k1 and blzp1600 (new
drivers added this cycle)
- document more properties for gpio-vf610 and gpio-tegra186
- document a new pca95xx variant
- fix style of examples in several GPIO DT-binding documents
Misc:
- TODO list updates
-----BEGIN PGP SIGNATURE-----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=PQqp
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have three new drivers, some refactoring in the GPIO core, lots of
various changes across many drivers, new configfs interface for the
virtual gpio-aggregator module and DT-bindings updates.
The treewide conversion of GPIO drivers to using the new value setter
callbacks is ongoing with another round of GPIO drivers updated. You
will also see these commits coming in from other subsystems as with
the relevant changes merged into mainline last cycle, I've started
converting GPIO providers located elsewhere than drivers/gpio/.
GPIO core:
- use more lock guards where applicable
- refactor GPIO ACPI code and shrink it in the process by 8%
- move GPIO ACPI quirks into a separate file
- remove unneeded #ifdef
- convert GPIO devres helpers to using devm_add_action() where
applicable which shrinks and simplifies the code
- refactor GPIO descriptor validation in GPIO consumer interfaces
- don't allow setting values on input lines in the GPIO core which
will take off the burden from GPIO drivers of checking this down
the line
- provide gpiod_is_equal() as a way of safely comparing two GPIO
descriptors (the only current user is in regulator core)
New drivers:
- add the GPIO module for the max77759 multifunction device
- add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller
- add the GPIO driver for the Spacemit K1 SoC
Driver improvements:
- convert more drivers to using the new GPIO line value setter
callbacks
- convert more drivers to making the irq_chip immutable as is
recommended by the interrupt subsystem
- extend build testing coverage by enabling more modules to be built
with COMPILE_TEST=y
- extend the gpio-aggregator module with a configfs interface that
makes the setup easier for user-space than the existing
driver-level sysfs attributes and also adds more advanced
configuration features (such as referring to aggregated lines by
their original names or modifying their names as exposed by the
aggregated chip)
- add a missing mutex_destroy() in gpio-imx-scu
- add an OF polarity quirk for s5m8767
- allow building gpio-vf610 as a loadable module
- make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS
interface disabled (another small step towards getting rid of the
global GPIO numberspace)
- add support for level-triggered interrupts to gpio-pca953x
- don't double-check the ngpios property in gpio-ds4520 as GPIO core
already does it
- don't double-check the number of GPIOs in gpio-imx-scu as GPIO core
already does it
- remove unused callbacks from gpio-max3191x
DT bindings:
- add device-tree bindings for max77759, spacemit,k1 and blzp1600
(new drivers added this cycle)
- document more properties for gpio-vf610 and gpio-tegra186
- document a new pca95xx variant
- fix style of examples in several GPIO DT-binding documents
Misc:
- TODO list updates"
* tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (123 commits)
gpio: timberdale: select GPIOLIB_IRQCHIP
gpio: lpc18xx: select GPIOLIB_IRQCHIP
gpio: grgpio: select GPIOLIB_IRQCHIP
gpio: bcm-kona: select GPIOLIB_IRQCHIP
dt-bindings: gpio: vf610: add ngpios and gpio-reserved-ranges
gpio: davinci: select GPIOLIB_IRQCHIP
gpiolib-acpi: Update file references in the Documentation and MAINTAINERS
gpiolib: acpi: Move quirks to a separate file
gpiolib: acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter
gpiolib: acpi: Handle deferred list via new API
gpiolib: acpi: Make sure we fill struct acpi_gpio_info
gpiolib: acpi: Switch to use enum in acpi_gpio_in_ignore_list()
gpiolib: acpi: Use temporary variable for struct acpi_gpio_info
gpiolib: remove unneeded #ifdef
gpio: mpc8xxx: select GPIOLIB_IRQCHIP
gpio: pxa: select GPIOLIB_IRQCHIP
gpio: pxa: Make irq_chip immutable
gpio: timberdale: Make irq_chip immutable
gpio: xgene-sb: Make irq_chip immutable
gpio: davinci: Make irq_chip immutable
...
We've received a lot of activities in this cycle, mostly about leaf
driver codes rather than the core part, but with a good mixture of
code cleanups and new driver additions. Below are some highlights:
* ASoC:
- Support for automatically enumerating DAIs from standards conforming
SoundWire SDCA devices; not much used as of this writing, rather for
future implementations
- Conversion of quite a few drivers to newer GPIO APIs
- Continued cleanups and helper usages in allover places
- Support for a wider range of Intel AVS platforms
- Support for AMD ACP 7.x platforms, Cirrus Logic CS35L63 and CS48L32
Everest Semiconductor ES8375 and ES8389, Longsoon-1 AC'97
controllers, nVidia Tegra264, Richtek ALC203 and RT9123 and Rockchip
SAI controllers
* HD-audio:
- Lots of cleanups of TAS2781 codec drivers
- A new HD-audio control bound via ACPI for Nvidia
- Support for Tegra264, Intel WCL, usual new codec quirks
* USB-audio:
- Fix a race at removal of MIDI device
- Pioneer DJM-V10 support, Scarlett2 driver cleanups
* Misc:
- Cleanups of deprecated PCI functions
- Removal of unused / dead function codes
-----BEGIN PGP SIGNATURE-----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=ApEf
-----END PGP SIGNATURE-----
Merge tag 'sound-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"We've received a lot of activities in this cycle, mostly about leaf
driver codes rather than the core part, but with a good mixture of
code cleanups and new driver additions. Below are some highlights:
ASoC:
- Support for automatically enumerating DAIs from standards
conforming SoundWire SDCA devices; not much used as of this
writing, rather for future implementations
- Conversion of quite a few drivers to newer GPIO APIs
- Continued cleanups and helper usages in allover places
- Support for a wider range of Intel AVS platforms
- Support for AMD ACP 7.x platforms, Cirrus Logic CS35L63 and CS48L32
Everest Semiconductor ES8375 and ES8389, Longsoon-1 AC'97
controllers, nVidia Tegra264, Richtek ALC203 and RT9123 and
Rockchip SAI controllers
HD-audio:
- Lots of cleanups of TAS2781 codec drivers
- A new HD-audio control bound via ACPI for Nvidia
- Support for Tegra264, Intel WCL, usual new codec quirks
USB-audio:
- Fix a race at removal of MIDI device
- Pioneer DJM-V10 support, Scarlett2 driver cleanups
Misc:
- Cleanups of deprecated PCI functions
- Removal of unused / dead function codes"
* tag 'sound-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (364 commits)
firmware: cs_dsp: Fix OOB memory read access in KUnit test
ASoC: codecs: add support for ES8375
ASoC: dt-bindings: Add Everest ES8375 audio CODEC
ALSA: hda: acpi: Make driver's match data const static
ALSA: hda: acpi: Use SYSTEM_SLEEP_PM_OPS()
ALSA: atmel: Replace deprecated strcpy() with strscpy()
ALSA: core: fix up bus match const issues.
ASoC: wm_adsp: Make cirrus_dir const
ASoC: tegra: Tegra264 support in isomgr_bw
ASoC: tegra: AHUB: Add Tegra264 support
ASoC: tegra: ADX: Add Tegra264 support
ASoC: tegra: AMX: Add Tegra264 support
ASoC: tegra: I2S: Add Tegra264 support
ASoC: tegra: Update PLL rate for Tegra264
ASoC: tegra: ASRC: Update ARAM address
ASoC: tegra: ADMAIF: Add Tegra264 support
ASoC: tegra: CIF: Add Tegra264 support
dt-bindings: ASoC: Document Tegra264 APE support
dt-bindings: ASoC: admaif: Add missing properties
ASoC: dt-bindings: audio-graph-card2: reference audio-graph routing property
...
This time around the pwm changes for the next release contain three new
drivers (loongson, mc33xs2410 and rzg2l-gpt) and the usual collection of
cleanups in both the core and drivers, support for new variants in
existing drivers, conversion of dt bindings to yaml and documentation
updates.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmgzfgYACgkQj4D7WH0S
/k5nJggAoGbk5rGkAMzTNvrQxJLkS2MFQclHyiW+QQu3pOmIcK9rDYP7GI7LNHl5
PBfFGkeWmabdVyMwej87kNarrHLQxHvCfS8Ooc1rGYgaARhJhE2N2/xKLxNQPnhe
ZL95O6jcubdllOdHpaWHGaMkPvw4QVMZD9uRuy7ikuf+EiuUhqsqdMQix3x6RXc4
43XLJ1N5SNeHDdF8LVNEwnNwzYFjtLK94dEajPPw+EsiHQ/DyAEohl3vA6k4duxX
OnN5BA39SadBWLD4zZLj8LWZC38/1mEx+FUat5ub2q/Buj2/2rxg60Gp+0jyrDMK
44t3wlIM/VHpTzLN1Zh1UpY0bM8eIg==
=Y7Ef
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"This time around the pwm changes for the next release contain three
new drivers (loongson, mc33xs2410 and rzg2l-gpt) and the usual
collection of cleanups in both the core and drivers, support for new
variants in existing drivers, conversion of dt bindings to yaml and
documentation updates.
Thanks for contributions and reviews go to Alexey Charkov,
AngeloGioacchino Del Regno, Bartosz Golaszewski, Biju Das, Binbin
Zhou, Dan Carpenter, Dimitri Fedrau, Geert Uytterhoeven, George Stark,
Huacai Chen, Juxin Gao, Krzysztof Kozlowski, Kuninori Morimoto,
Laurent Pinchart, Neil Armstrong, Nuno Sá, Rob Herring, and Trevor
Gamblin"
* tag 'pwm/for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (39 commits)
dt-bindings: timer: renesas,tpu: remove binding documentation
pwm: adp5585: make sure to include mod_devicetable.h
pwm: Tidyup PWM menu for Renesas
pwm: Restore alphabetic ordering in Kconfig and Makefile
pwm: Formally describe the procedure used to pick a hardware waveform setting
pwm: Let pwm_set_waveform_might_sleep() return 0 instead of 1 after rounding up
pwm: Let pwm_set_waveform_might_sleep() fail for exact but impossible requests
ARM: shmobile: defconfig: Enable more support for RZN1D-DB/EB
arm64: defconfig: Add Renesas MSIOF sound support
arm64: defconfig: Enable Renesas RZ/G2L GPT config
pwm: add support for NXPs high-side switch MC33XS2410
dt-bindings: pwm: add support for MC33XS2410
pwm: rzg2l-gpt: Accept requests for too high period length
dt-bindings: pwm: vt8500-pwm: Convert to YAML
dt-bindings: pwm: mediatek,pwm-disp: Add compatible for MT6893
pwm: Fix various formatting issues in kernel-doc
pwm: Add support for RZ/G2L GPT
dt-bindings: pwm: Add RZ/G2L GPT binding
pwm: Better document return value of pwm_round_waveform_might_sleep()
pwm: loongson: Fix an error code in probe()
...
* New
- Support MT8192 Spherion and MT8186 Corsola devices in of_hw_prober.
- Turn cros_ec_proto from bool into tristate.
- Support Pin Assignment E in cros_ec_typec for USB-C to DP cables.
* Improvements
- Avoid -Wflex-array-member-not-at-end warnings.
* Cleanups
- Remove a redundant dependency in Kconfig for cros_kbd_led_backlight.
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCaDPbTxMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz0wXQBALquKyOJfs8uMRTQHd6hYoG/yiektfEO
GvYsaK1T4lojAP40/KH8KR5G0A0/9isFN717uieIwRWsCfBkZDbSXf+OAA==
=bqQj
-----END PGP SIGNATURE-----
Merge tag 'chrome-platform-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome-platform updates from Tzung-Bi Shih:
"New:
- Support MT8192 Spherion and MT8186 Corsola devices in of_hw_prober
- Turn cros_ec_proto from bool into tristate
- Support Pin Assignment E in cros_ec_typec for USB-C to DP cables
Improvements:
- Avoid -Wflex-array-member-not-at-end warnings
Cleanups:
- Remove a redundant dependency in Kconfig for cros_kbd_led_backlight"
* tag 'chrome-platform-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: kunit: Avoid -Wflex-array-member-not-at-end
platform/chrome: cros_ec_typec: Set Pin Assignment E in DP PORT VDO
platform/chrome: of_hw_prober: Support touchscreen probing on Squirtle
platform/chrome: of_hw_prober: Support trackpad probing on Corsola family
platform/chrome: cros_kbd_led_backlight: Fix build dependencies
platform/chrome: cros_kbd_led_backlight: Remove CROS_EC dependency
platform/chrome: cros_ec_proto: Allow to build as module
platform/chrome: cros_ec_debugfs: Avoid -Wflex-array-member-not-at-end warnings
platform/chrome: cros_kbd_led_backlight: Avoid -Wflex-array-member-not-at-end warnings
platform/chrome: cros_ec_proto: Avoid -Wflex-array-member-not-at-end warnings
platform/chrome: of_hw_prober: Support Google Spherion
This just converts the 'cc-disable-warning' uses in the generic makefile
extrawarn script to use the plain 'cc-option' form instead. Partly to
clean things up, and partly just to have the new form get some proper
test coverage.
I'll leave the various random other uses of 'cc-disable-warning' alone
and let subsystem maintainers decide if they want to convert to the new
unified model.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the follow-up to commit a79be02bba ("Fix mis-uses of
'cc-option' for warning disablement") where I mentioned that the best
fix would be to just make 'cc-option' a bit smarter, and work for all
compiler options, including the '-Wno-xyzzy' pattern that it used to
accept unknown options for.
It turns out that fixing cc-option is pretty straightforward: just
rewrite any '-Wno-xyzzy' option pattern to use '-Wxyzzy' instead for
testing.
That makes the whole artificial distinction between 'cc-option' and
'cc-disable-warning' go away, and we can happily forget about the odd
build rule that you have to treat compiler options that disable warnings
specially.
The 'cc-disable-warning' helper remains as a backwards compatibility
syntax for now, but is implemented in terms of the new and improved
cc-option.
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add two tests:
- one test has 'rX <op> r10' where rX is not r10, and
- another test has 'rX <op> rY' where rX and rY are not r10
but there is an early insn 'rX = r10'.
Without previous verifier change, both tests will fail.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250524041340.4046304-1-yonghong.song@linux.dev
The kernel v6.14 added 'swfilt' to support privilege filtering in
software so that IBS can be used by regular users. Add a test case in
x86 to verify the behavior.
$ sudo perf test -vv 'IBS software filter'
113: AMD IBS software filtering:
--- start ---
test child forked, pid 178826
check availability of IBS swfilt
run perf record with modifier and swfilt
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.000 MB /dev/null ]
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.000 MB /dev/null ]
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.000 MB /dev/null ]
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 0.000 MB /dev/null ]
check number of samples with swfilt
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.037 MB - ]
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.041 MB - ]
---- end(0) ----
113: AMD IBS software filtering : Ok
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> # On a 9950x3d
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250524002754.1266681-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
L2 HITM is not counted in c2c statistic decoding. Count it for lcl_hitm
like how we handle L2 Peer snoop.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Cc: CaiJingtao <caijingtao@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Yushan Wang <wangyushan12@huawei.com>
Cc: Zeng Tao <prime.zeng@hisilicon.com>
Cc: xueshan2@huawei.com
Link: https://lore.kernel.org/r/20250425033845.57671-4-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add data source encoding for HiSilicon HIP12 and coresponding mapping
to the perf's memory data source. This will help to synthesize the data
and support upper layer tools like perf-mem and perf-c2c.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Cc: CaiJingtao <caijingtao@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Yushan Wang <wangyushan12@huawei.com>
Cc: Zeng Tao <prime.zeng@hisilicon.com>
Cc: xueshan2@huawei.com
Link: https://lore.kernel.org/r/20250425033845.57671-3-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the commit f37952339c ("drm/bridge: analogix_dp: handle clock via
runtime PM"), the PM operations can help enable/disable the clock. The
err_disable_clk label and clk_disable_unprepare() operations are no
longer necessary because the analogix_dp_resume() will not be called
during probing.
Fixes: f37952339c ("drm/bridge: analogix_dp: handle clock via runtime PM")
Suggested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250302083043.3197235-1-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
On driver remove, sound/soc/codecs/hdmi-codec.c calls the plugged_cb
with NULL as the callback function and codec_dev, as seen in its
hdmi_remove function.
The HDMI audio helper then happily tries calling said null function
pointer, and produces an Oops as a result.
Fix this by only executing the callback if fn is non-null. This means
the .plugged_cb and .plugged_cb_dev members still get appropriately
cleared.
Fixes: baf616647f ("drm/connector: implement generic HDMI audio helpers")
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250527-hdmi-audio-helper-remove-fix-v1-1-6cf77de364d8@collabora.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Allow properties from video-interface-devices. The change is identical to
commit b6339ecfd0 ("media: dt-bindings: sony,imx290: Allow props from
video-interface-devices")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Link: https://lore.kernel.org/r/20250515142945.1348722-1-alexander.stein@ew.tq-group.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
All Qualcomm SoC Soundwire controllers are version-detectable (even
1.x), however certain unidentified quirks might be potentially needed,
so document v2.1 version used on Qualcomm SM8650 and SM8750 SoCs,
fallbacking to v2.0.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250519080453.29858-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The nested loop in iwl_mld_send_proto_offload() confuses Clang into
thinking there could be a final loop iteration past the end of the
"nsc" array (which is only 4 entries). The FORTIFY checking in memcmp()
(via ipv6_addr_cmp()) notices this (due to the available bytes in the
out-of-bounds position of &nsc[4] being 0), and errors out, failing
the build. For some reason (likely due to architectural loop unrolling
configurations), this is only exposed on ARM builds currently. Due to
Clang's lack of inline tracking[1], the warning is not very helpful:
include/linux/fortify-string.h:719:4: error: call to '__read_overflow' declared with 'error' attribute: detected read beyond size of object (1st parameter)
719 | __read_overflow();
| ^
1 error generated.
But this was tracked down to iwl_mld_send_proto_offload()'s
ipv6_addr_cmp() call.
An upstream Clang bug has been filed[2] to track this. For now fix the
build by explicitly bounding the inner loop by "n_nsc", which is what
"c" is already limited to.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://github.com/ClangBuiltLinux/linux/issues/2076
Link: https://github.com/llvm/llvm-project/pull/73552 [1]
Link: https://github.com/llvm/llvm-project/issues/136603 [2]
Link: https://lore.kernel.org/r/20250421204153.work.935-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
While at it, already adjust the rpe_freq frequency, to highlight
that both are calculated by PCODE at runtime.
Fixes: c6aac2fa77 ("drm/xe: Introduce the RPa information")
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://lore.kernel.org/r/20250521165146.39616-4-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The documentation was created with the creation of the component,
however it has never been actually shown in the actual Documentation.
While doing this, fixes the identation style, to avoid new warnings
while building htmldocs.
Fixes: bef52b5c7a ("drm/xe: Create a xe_gt_freq component for raw management and sysfs")
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250521165146.39616-3-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The "^group-[0-9a-z-]+$" nodes schema doesn't constrain the allowed
properties as the referenced common schemas don't have constraints.
Add the missing "unevaluatedProperties" constraint.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250507215852.2748420-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Jens Axboe <axboe@kernel.dk> says:
As per the thread here:
https://lore.kernel.org/linux-fsdevel/20250525083209.GS2023217@ZenIV/
there was an issue with the dropbehind support, and hence it got
reverted (effectively) for the 6.15 kernel release. The problem stems
from the fact that the folio can get redirtied and/or scheduled for
writeback after the initial dropbehind test, and before we have it
locked again for invalidation.
Patches 1+2 add a generic helper that both the read and write side can
use, and which checks for !dirty && !writeback before going ahead with
the invalidation. Patch 3 reverts the FOP_DONTCACHE disable, and patches
4 and 5 do a bit of cleanup work to further unify how the read and write
side handling works.
This can reasonably be considered a 2 part series, as 1-3 fix the issue
and could go to stable, while 4-5 just cleanup the code.
* patches from https://lore.kernel.org/20250527133255.452431-1-axboe@kernel.dk:
mm/filemap: unify dropbehind flag testing and clearing
mm/filemap: unify read/write dropbehind naming
Revert "Disable FOP_DONTCACHE for now due to bugs"
mm/filemap: use filemap_end_dropbehind() for read invalidation
mm/filemap: gate dropbehind invalidate on folio !dirty && !writeback
Link: https://lore.kernel.org/20250527133255.452431-1-axboe@kernel.dk
Signed-off-by: Christian Brauner <brauner@kernel.org>
The read and write side does this a bit differently, unify it such that
the _{read,write} helpers check the bit before locking, and the generic
handler is in charge of clearing the bit and invalidating, once under
the folio lock.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/20250527133255.452431-6-axboe@kernel.dk
Signed-off-by: Christian Brauner <brauner@kernel.org>
The read side is filemap_end_dropbehind_read(), while the write side
used folio_ as the prefix rather than filemap_. The read side makes more
sense, unify the naming such that the write side follows that.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/20250527133255.452431-5-axboe@kernel.dk
Signed-off-by: Christian Brauner <brauner@kernel.org>
It's possible for the folio to either get marked for writeback or
redirtied. Add a helper, filemap_end_dropbehind(), which guards the
folio_unmap_invalidate() call behind check for the folio being both
non-dirty and not under writeback AFTER the folio lock has been
acquired. Use this helper folio_end_dropbehind_write().
Cc: stable@vger.kernel.org
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: fb7d3bc414 ("mm/filemap: drop streaming/uncached pages when writeback completes")
Link: https://lore.kernel.org/linux-fsdevel/20250525083209.GS2023217@ZenIV/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/20250527133255.452431-2-axboe@kernel.dk
Signed-off-by: Christian Brauner <brauner@kernel.org>
Highlights:
* New supported architectures: m68k, SPARC (32 and 64 bit)
* Compatibility with kselftest_harness.h
* A more robust mechanism to include all of nolibc from each header
* Split existing features into new headers to simplify adoption
* Compatibility with UBSAN and it is used in the testsuite
* Many small new features focussing on usage in kselftests
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTg4lxklFHAidmUs57B+h1jyw5bOAUCaDTMAgAKCRDB+h1jyw5b
ONycAQD35X+ca33v05Zup3oEne2zZtKqeRlStcFTp2AY03MpngEA46IsX5yBf1Hj
GgsmC/RFGicF9RjaymgdAB5WOg0CeAc=
=tjwV
-----END PGP SIGNATURE-----
Merge tag 'nolibc-20250526-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc
Pull nolibc updates from Thomas Weißschuh:
- New supported architectures: m68k, SPARC (32 and 64 bit)
- Compatibility with kselftest_harness.h
- A more robust mechanism to include all of nolibc from each header
- Split existing features into new headers to simplify adoption
- Compatibility with UBSAN and it is used in the testsuite
- Many small new features focussing on usage in kselftests
* tag 'nolibc-20250526-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc: (83 commits)
selftests: harness: Stop using setjmp()/longjmp()
selftests: harness: Add "variant" and "self" to test metadata
selftests: harness: Add teardown callback to test metadata
selftests: harness: Move teardown conditional into test metadata
selftests: harness: Don't set setup_completed for fixtureless tests
selftests: harness: Implement test timeouts through pidfd
selftests: harness: Remove dependency on libatomic
selftests: harness: Remove inline qualifier for wrappers
selftests: harness: Mark functions without prototypes static
selftests: harness: Ignore unused variant argument warning
selftests: harness: Use C89 comment style
selftests: harness: Add kselftest harness selftest
selftests/nolibc: drop include guards around standard headers
tools/nolibc: move NULL and offsetof() to sys/stddef.h
tools/nolibc: move uname() and friends to sys/utsname.h
tools/nolibc: move makedev() and friends to sys/sysmacros.h
tools/nolibc: move getrlimit() and friends to sys/resource.h
tools/nolibc: move reboot() to sys/reboot.h
tools/nolibc: move prctl() to sys/prctl.h
tools/nolibc: move mount() to sys/mount.h
...
- The most significant change is the replacement of the old kernel-doc
script (a monstrous collection of Perl regexes that predates the Git era)
with a Python reimplementation. That, too, is a horrifying collection of
regexes, but in a much cleaner and more maintainable structure that
integrates far better with the Sphinx build system.
This change has been in linux-next for the full 6.15 cycle; the small
number of problems that turned up have been addressed, seemingly to
everybody's satisfaction. The Perl kernel-doc script remains in tree (as
scripts/kernel-doc.pl) and can be used with a command-line option if need
be. Unless some reason to keep it around materializes, it will probably
go away in 6.17.
Credit goes to Mauro Carvalho Chehab for doing all this work.
- Some RTLA documentation updates
- A handful of Chinese translations
- The usual collection of typo fixes, general updates, etc.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmg0j/IPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Yu7sH/1w2LtO8XB/KTRNmuz3tV6KzGtDvQVwqgxB2
X8bbeJlBtYenvuak66RjCfucOh7Y8Ni3UN0G2BGa67KBAxmZEYc6u+IF4SrJUg5g
DuS6+ZXgqV4TrjWMRof5LtPS8KbNJLGnqgxSVdEPSBV0jJ13r3gb3/e7X06iNAKR
X4Nq+h5aa1tCwZTkPOSHHQn4qm3Tb1LQreDSn8gnBn6e8nVJIakNlwaVYkClhI9B
byvItInv32LPAXPDkcEWITvLNUTiMobTyfBYHOD6i3nImQ+j4ZiMMmOUjiB+0jDO
UQDvoUa46ipXkLBsBOrYEkM/iKXBawMwTa3CcudxR4scvVgATJs=
=BQ9X
-----END PGP SIGNATURE-----
Merge tag 'docs-6.16' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A moderately busy cycle for documentation this time around:
- The most significant change is the replacement of the old
kernel-doc script (a monstrous collection of Perl regexes that
predates the Git era) with a Python reimplementation. That, too, is
a horrifying collection of regexes, but in a much cleaner and more
maintainable structure that integrates far better with the Sphinx
build system.
This change has been in linux-next for the full 6.15 cycle; the
small number of problems that turned up have been addressed,
seemingly to everybody's satisfaction. The Perl kernel-doc script
remains in tree (as scripts/kernel-doc.pl) and can be used with a
command-line option if need be. Unless some reason to keep it
around materializes, it will probably go away in 6.17.
Credit goes to Mauro Carvalho Chehab for doing all this work.
- Some RTLA documentation updates
- A handful of Chinese translations
- The usual collection of typo fixes, general updates, etc"
* tag 'docs-6.16' of git://git.lwn.net/linux: (85 commits)
Docs: doc-guide: update sphinx.rst Sphinx version number
docs: doc-guide: clarify latest theme usage
Documentation/scheduler: Fix typo in sched-stats domain field description
scripts: kernel-doc: prevent a KeyError when checking output
docs: kerneldoc.py: simplify exception handling logic
MAINTAINERS: update linux-doc entry to cover new Python scripts
docs: align with scripts/syscall.tbl migration
Documentation: NTB: Fix typo
Documentation: ioctl-number: Update table intro
docs: conf.py: drop backward support for old Sphinx versions
Docs: driver-api/basics: add kobject_event interfaces
Docs: relay: editing cleanups
docs: fix "incase" typo in coresight/panic.rst
Fix spelling error for 'parallel'
docs: admin-guide: fix typos in reporting-issues.rst
docs: dmaengine: add explanation for DMA_ASYNC_TX capability
Documentation: leds: improve readibility of multicolor doc
docs: fix typo in firmware-related section
docs: Makefile: Inherit PYTHONPYCACHEPREFIX setting as env variable
Documentation: ioctl-number: Update outdated submission info
...
There was no documentation yet on the KUnit-based `#[test]`s.
Thus add it now.
It includes an explanation about the `assert*!` macros being mapped to
KUnit and the support for `-> Result` introduced in these series.
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250502215133.1923676-8-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Now that `rusttest`s are not really used much, clarify the section of
the documentation that describes them.
In addition, free the section name for the KUnit-based `#[test]`s that
will be added afterwards. To do so, rename the section into `rusttest`
host tests.
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250502215133.1923676-7-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Since now we have support for returning `-> Result`s, we can convert some
of these tests to use the feature, and serve as a first user for it too.
Thus convert them, which allows us to remove some `unwrap()`s.
We keep the actual assertions we want to make as explicit ones with
`assert*!`s.
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250502215133.1923676-6-ojeda@kernel.org
[ Split the `CString` simplification into a new commit. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Simplify the `format!` macro used in the tests by using
`CString::try_from_fmt` and directly `unwrap()`ing.
This will allow us to change both `unwrap()`s here in order to showcase
the `?` operator support now that the tests are KUnit ones.
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
[ Split from the next commit as suggested by Tamir. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In general, we should aim to test as much as possible within the actual
kernel, and not in the build host.
Thus convert these `rusttest` tests into KUnit tests.
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250502215133.1923676-5-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
It is convenient to have certain things in the `kernel` prelude, and
means kernel developers will find it even easier to start writing tests.
And, anyway, nobody should need to use this identifier for anything else.
Thus add it to the prelude.
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250502215133.1923676-4-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Currently, return values of KUnit `#[test]` functions are ignored.
Thus introduce support for `-> Result` functions by checking their
returned values.
At the same time, require that test functions return `()` or `Result<T,
E>`, which should avoid mistakes, especially with non-`#[must_use]`
types. Other types can be supported in the future if needed.
With this, a failing test like:
#[test]
fn my_test() -> Result {
f()?;
Ok(())
}
will output:
[ 3.744214] KTAP version 1
[ 3.744287] # Subtest: my_test_suite
[ 3.744378] # speed: normal
[ 3.744399] 1..1
[ 3.745817] # my_test: ASSERTION FAILED at rust/kernel/lib.rs:321
[ 3.745817] Expected is_test_result_ok(my_test()) to be true, but is false
[ 3.747152] # my_test.speed: normal
[ 3.747199] not ok 1 my_test
[ 3.747345] not ok 4 my_test_suite
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250502215133.1923676-3-ojeda@kernel.org
[ Used `::kernel` for paths. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The KUnit `#[test]` support that landed recently is very basic and does
not map the `assert*!` macros into KUnit like the doctests do, so they
panic at the moment.
Thus implement the custom mapping in a similar way to doctests, reusing
the infrastructure there.
In Rust 1.88.0, the `file()` method in `Span` may be stable [1]. However,
it was changed recently (from `SourceFile`), so we need to do something
different in previous versions. Thus create a helper for it and use it
to get the path.
With this, a failing test suite like:
#[kunit_tests(my_test_suite)]
mod tests {
use super::*;
#[test]
fn my_first_test() {
assert_eq!(42, 43);
}
#[test]
fn my_second_test() {
assert!(42 >= 43);
}
}
will properly map back to KUnit, printing something like:
[ 1.924325] KTAP version 1
[ 1.924421] # Subtest: my_test_suite
[ 1.924506] # speed: normal
[ 1.924525] 1..2
[ 1.926385] # my_first_test: ASSERTION FAILED at rust/kernel/lib.rs:251
[ 1.926385] Expected 42 == 43 to be true, but is false
[ 1.928026] # my_first_test.speed: normal
[ 1.928075] not ok 1 my_first_test
[ 1.928723] # my_second_test: ASSERTION FAILED at rust/kernel/lib.rs:256
[ 1.928723] Expected 42 >= 43 to be true, but is false
[ 1.929834] # my_second_test.speed: normal
[ 1.929868] not ok 2 my_second_test
[ 1.930032] # my_test_suite: pass:0 fail:2 skip:0 total:2
[ 1.930153] # Totals: pass:0 fail:2 skip:0 total
Link: https://github.com/rust-lang/rust/pull/140514 [1]
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250502215133.1923676-2-ojeda@kernel.org
[ Required `KUNIT=y` like for doctests. Used the `cfg_attr` from the
TODO comment and clarified its comment now that the stabilization is
in beta and thus quite likely stable in Rust 1.88.0. Simplified the
`new_body` code by introducing a new variable. Added
`#[allow(clippy::incompatible_msrv)]`. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Alexis Lothoré says:
====================
this is the v2 of the many args series for arm64, being itself a revival
of Xu Kuhoai's work to enable larger arguments count for BPF programs on
ARM64 ([1]).
The discussions in v1 shed some light on some issues around specific
cases, for example with functions passing struct on stack with custom
packing/alignment attributes: those cases can not be properly detected
with the current BTF info. So this new revision aims to separate
concerns with a simpler implementation, just accepting additional args
on stack if we can make sure about the alignment constraints (and so,
refusing attachment to functions passing structs on stacks). I then
checked if the specific alignment constraints could be checked with
larger scalar types rather than structs, but it appears that this use
case is in fact rejected at the verifier level (see a9b59159d3 ("bpf:
Do not allow btf_ctx_access with __int128 types")). So in the end the
specific alignment corner cases raised in [1] can not really happen in
the kernel in its current state. This new revision still brings support
for the standard cases as a first step, it will then be possible to
iterate on top of it to add the more specific cases like struct passed
on stack and larger types.
[1] https://lore.kernel.org/all/20230917150752.69612-1-xukuohai@huaweicloud.com/#t
Changes in v3:
- switch back -EOPNOTSUPP to -ENOTSUPP
- fix comment style
- group intializations for arg_aux
- remove some unneeded round_up
- Link to v2: https://lore.kernel.org/r/20250522-many_args_arm64-v2-0-d6afdb9cf819@bootlin.com
Changes in v2:
- remove alignment computation from btf.c
- deduce alignment constraints directly in jit compiler for simple types
- deny attachment to functions with "corner-cases" arguments (ie:
structs on stack)
- remove custom tests, as the corresponding use cases are locked either
by the JIT comp or the verifier
- drop RFC
- Link to v1: https://lore.kernel.org/r/20250411-many_args_arm64-v1-0-0a32fe72339e@bootlin.com
====================
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Acked-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://patch.msgid.link/20250527-many_args_arm64-v3-0-3faf7bb8e4a2@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that support for up to 12 args is enabled for tracing programs on
ARM64, enable the existing tests for this feature on this architecture.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20250527-many_args_arm64-v3-2-3faf7bb8e4a2@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently ARM64 bpf trampoline supports up to 8 function arguments.
According to the statistics from commit
473e3150e3 ("bpf, x86: allow function arguments up to 12 for TRACING"),
there are about 200 functions accept 9 to 12 arguments, so adding support
for up to 12 function arguments.
Due to bpf only supporting function arguments up to 16 bytes, according to
AAPCS64, starting from the first argument, each argument is first
attempted to be loaded to 1 or 2 smallest registers from x0-x7, if there
are no enough registers to hold the entire argument, then all remaining
arguments starting from this one are pushed to the stack for passing.
There are some non-trivial cases for which it is not possible to
correctly read arguments from/write arguments to the stack: for example
struct variables may have custom packing/alignment attributes that are
invisible in BTF info. Such cases are denied for now to make sure not to
read incorrect values.
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Co-developed-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20250527-many_args_arm64-v3-1-3faf7bb8e4a2@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Changes
-------
* Reduce open-coded use of ratelimit_state structure fields.
* Convert the ->missed field to atomic_t.
* Count misses that are due to lock contention.
* Eliminate jiffies=0 special case.
* Reduce ___ratelimit() false-positive rate limiting (Petr Mladek).
* Allow zero ->burst to hard-disable rate limiting.
* Optimize away atomic operations when a miss is guaranteed.
* Warn if ->interval or ->burst are negative (Petr Mladek).
* Simplify the resulting code.
A smoke test and stress test have been created, but they are not yet ready
for mainline. With luck, we will offer them for the v6.17 merge window.
-----BEGIN PGP SIGNATURE-----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=ivk+
-----END PGP SIGNATURE-----
Merge tag 'ratelimit.2025.05.25a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull rate-limit updates from Paul McKenney:
"lib/ratelimit: Reduce false-positive and silent misses:
- Reduce open-coded use of ratelimit_state structure fields.
- Convert the ->missed field to atomic_t.
- Count misses that are due to lock contention.
- Eliminate jiffies=0 special case.
- Reduce ___ratelimit() false-positive rate limiting (Petr Mladek).
- Allow zero ->burst to hard-disable rate limiting.
- Optimize away atomic operations when a miss is guaranteed.
- Warn if ->interval or ->burst are negative (Petr Mladek).
- Simplify the resulting code.
A smoke test and stress test have been created, but they are not yet
ready for mainline. With luck, we will offer them for the v6.17 merge
window"
* tag 'ratelimit.2025.05.25a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
ratelimit: Drop redundant accesses to burst
ratelimit: Use nolock_ret restructuring to collapse common case code
ratelimit: Use nolock_ret label to collapse lock-failure code
ratelimit: Use nolock_ret label to save a couple of lines of code
ratelimit: Simplify common-case exit path
ratelimit: Warn if ->interval or ->burst are negative
ratelimit: Avoid atomic decrement under lock if already rate-limited
ratelimit: Avoid atomic decrement if already rate-limited
ratelimit: Don't flush misses counter if RATELIMIT_MSG_ON_RELEASE
ratelimit: Force re-initialization when rate-limiting re-enabled
ratelimit: Allow zero ->burst to disable ratelimiting
ratelimit: Reduce ___ratelimit() false-positive rate limiting
ratelimit: Avoid jiffies=0 special case
ratelimit: Count misses due to lock contention
ratelimit: Convert the ->missed field to atomic_t
drm/amd/pm: Avoid open-coded use of ratelimit_state structure's internals
drm/i915: Avoid open-coded use of ratelimit_state structure's ->missed field
random: Avoid open-coded use of ratelimit_state structure's ->missed field
ratelimit: Create functions to handle ratelimit_state internals
syzkaller reported an issue:
WARNING: CPU: 3 PID: 217 at kernel/bpf/core.c:2357 __bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357
Modules linked in:
CPU: 3 UID: 0 PID: 217 Comm: kworker/u32:6 Not tainted 6.15.0-rc4-syzkaller-00040-g8bac8898fe39
RIP: 0010:__bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357
Call Trace:
<TASK>
bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline]
__bpf_prog_run include/linux/filter.h:718 [inline]
bpf_prog_run include/linux/filter.h:725 [inline]
cls_bpf_classify+0x74a/0x1110 net/sched/cls_bpf.c:105
...
When creating bpf program, 'fp->jit_requested' depends on bpf_jit_enable.
This issue is triggered because of CONFIG_BPF_JIT_ALWAYS_ON is not set
and bpf_jit_enable is set to 1, causing the arch to attempt JIT the prog,
but jit failed due to FAULT_INJECTION. As a result, incorrectly
treats the program as valid, when the program runs it calls
`__bpf_prog_ret0_warn` and triggers the WARN_ON_ONCE(1).
Reported-by: syzbot+0903f6d7f285e41cdf10@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/6816e34e.a70a0220.254cdc.002c.GAE@google.com
Fixes: fa9dd599b4 ("bpf: get rid of pure_initcall dependency to enable jits")
Signed-off-by: KaFai Wan <mannkafai@gmail.com>
Link: https://lore.kernel.org/r/20250526133358.2594176-1-mannkafai@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch exposes the btf_custom_path feature to bpftool, allowing users
to specify a custom BTF file when loading BPF programs using prog load or
prog loadall commands.
The argument 'btf_custom_path' in libbpf is used for those kernels that
don't have CONFIG_DEBUG_INFO_BTF enabled but still want to perform CO-RE
relocations.
Suggested-by: Quentin Monnet <qmo@kernel.org>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/r/20250516144708.298652-1-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add some inline-asm tests and C tests where __bpf_trap() or
__builtin_trap() is used in the code. The __builtin_trap()
test is guarded with llvm21 ([1]) since otherwise the compilation
failure will happen.
[1] https://github.com/llvm/llvm-project/pull/131731
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250523205331.1291734-1-yonghong.song@linux.dev
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>