Move the WMI core code into a separate directory to prepare for
future additions to the WMI driver. Also update the description
of the Kconfig entry to better fit with the other subsystem
Kconfig entries.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251111131125.3379-5-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The external function definitions do not need the "extern" keyword.
Remove it to silence the associated checkpatch warnings.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251111131125.3379-4-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When evaluating a WMxx/WSxx ACPI control method, the data buffer
either needs to be passed as an ACPI buffer or as an ACPI string.
Use the correct type (buffer/string) when populating the associated
ACPI object.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251111131125.3379-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently the function responsible for converting between utf16 and
utf8 strings will ignore any characters that cannot be converted. This
however also includes multi-byte characters that do not fit into the
provided string buffer.
This can cause problems if such a multi-byte character is followed by
a single-byte character. In such a case the multi-byte character might
be ignored when the provided string buffer is too small, but the
single-byte character might fit and is thus still copied into the
resulting string.
Fix this by stop filling the provided string buffer once a character
does not fit. In order to be able to do this extend utf32_to_utf8()
to return useful errno codes instead of -1.
Fixes: 74675a5850 ("NLS: update handling of Unicode")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251111131125.3379-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
With CONFIG_KLP_BUILD enabled, checksums are only needed during a
klp-build run. There's no need to enable them for normal kernel builds.
This also has the benefit of softening the xxhash dependency.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/edbb1ca215e4926e02edb493b68b9d6d063e902f.1762990139.git.jpoimboe@kernel.org
Adds the ppt_* and nv_* tuning knobs that are available via WMI methods
and adds proper min/max levels plus defaults.
The min/max are defined by ASUS and typically gained by looking at what
they allow in the ASUS Armoury Crate application - ASUS does not share
the values outside of this. It could also be possible to gain the AMD
values by use of ryzenadj and testing for the minimum stable value.
The general rule of thumb for adding to the match table is that if the
model range has a single CPU used throughout, then the DMI match can
omit the last letter of the model number as this is the GPU model.
If a min or max value is not provided it is assumed that the particular
setting is not supported. for example ppt_pl2_sppt_min/max is not set.
If a <ppt_setting>_def is not set then the default is assumed to be
<ppt_setting>_max
It is assumed that at least AC settings are available so that the
firmware attributes will be created - if no DC table is available
and power is on DC, then reading the attributes is -ENODEV.
Co-developed-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mateusz Schyboll <dragonn@op.pl>
Tested-by: Porfet Lillian <porfet828@gmail.com>
Link: https://patch.msgid.link/20251102215319.3126879-10-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
With the existence of the asus-armoury module the attributes no longer
need to live under the /sys/devices/platform/asus-nb-wmi/ path.
Deprecate all those that were implemented in asus-bioscfg with the goal
of removing them fully in the next LTS cycle.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20251102215319.3126879-8-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add screen_auto_brightness toggle supported on some laptops.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20251102215319.3126879-7-denis.benato@linux.dev
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Implement the APU memory size control under the asus-armoury module using
the fw_attributes class.
This allows the APU allocated memory size to be adjusted depending on
the users priority. A reboot is required after change.
Co-developed-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://patch.msgid.link/20251102215319.3126879-5-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
In file uncore-frequency/uncore-frequency-common.h,
correct all kernel-doc warnings by adding missing leading " *" to some
lines, adding a missing kernel-doc entry, and fixing a name typo.
Warning: uncore-frequency-common.h:50 bad line:
Storage for kobject attribute elc_low_threshold_percent
Warning: uncore-frequency-common.h:52 bad line:
Storage for kobject attribute elc_high_threshold_percent
Warning: uncore-frequency-common.h:54 bad line:
Storage for kobject attribute elc_high_threshold_enable
Warning: uncore-frequency-common.h:92 struct member
'min_freq_khz_kobj_attr' not described in 'uncore_data'
Warning: uncore-frequency-common.h:92 struct member
'die_id_kobj_attr' not described in 'uncore_data'
Fixes: 24b6616355 ("platform/x86/intel-uncore-freq: Add efficiency latency control to sysfs interface")
Fixes: 416de0246f ("platform/x86: intel-uncore-freq: Fix types in sysfs callbacks")
Fixes: 247b43fcd8 ("platform/x86/intel-uncore-freq: Add attributes to show die_id")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251111060938.1998542-1-rdunlap@infradead.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
isst_if_probe() uses pci_read_config_dword() that returns PCIBIOS_*
codes. The return code is returned from the probe function as is but
probe functions should return normal errnos. A proper implementation
can be found in drivers/leds/leds-ss4200.c.
Convert PCIBIOS_* return codes using pcibios_err_to_errno() into
normal errno before returning.
Fixes: d3a2358429 ("platform/x86: ISST: Add Intel Speed Select mmio interface")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20251117033354.132-1-vulab@iscas.ac.cn
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
And expand it to encompass all pressure pads.
Definition: "pressure pad" as used here as includes all touchpads that
use physical pressure to convert to click, without physical hinges. Also
called haptic touchpads in general parlance, Synaptics calls them
ForcePads.
Most (all?) pressure pads are currently advertised as
INPUT_PROP_BUTTONPAD. The suggestion to identify them as pressure pads
by defining the resolution on ABS_MT_PRESSURE has been in the docs since
commit 20ccc8dd38 ("Documentation: input: define
ABS_PRESSURE/ABS_MT_PRESSURE resolution as grams") but few devices
provide this information.
In userspace it's thus impossible to determine whether a device is a
true pressure pad (pressure equals pressure) or a normal clickpad with
(pressure equals finger size).
Commit 7075ae4ac9 ("Input: add INPUT_PROP_HAPTIC_TOUCHPAD") introduces
INPUT_PROP_HAPTIC_TOUCHPAD but restricted it to those touchpads that
have support for userspace-controlled effects. Let's expand and rename
that definition to include all pressure pad touchpads since those that
do support FF effects can be identified by the presence of the
FF_HAPTIC bit.
This means:
- clickpad: INPUT_PROP_BUTTONPAD
- pressurepad: INPUT_PROP_BUTTONPAD + INPUT_PROP_PRESSUREPAD
- pressurepad with configurable haptics:
INPUT_PROP_BUTTONPAD + INPUT_PROP_PRESSUREPAD + FF_HAPTIC
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://patch.msgid.link/20251106114534.GA405512@tassie
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmkaT2IeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGnakIAIq6O35+abAlDGe7
n8IwX/4hwDJ9Ol2vddg6jTdio3szSlvcXRAyijkG35etLap+i+Q78Q9H1fRcQ8CF
5t9kfs5oCVWEDlsHMI+Q38vYB3tWikaIUIuao6pH5U50fsA0KM/287TLYdzvmBsK
gy0BHoZhl++xdMsD2HNwt08RrK/IyY+Zp9i7pKhcsxJiJCgy8nq5ZxhmRPbqTKNc
IqIBPzG+UYcOd88Iz377Ax+TnzWaTpwyvfaiU8DVFMN0FeENdk1FY8ClYfpYxCDH
Pm5NzL/f54VtdZ3aL1fKmYwWN7WFJT4FH3l6DOvtCc+Gx3KW1a3Y508CbqYBXvgY
QV4oH4Y=
=iSoY
-----END PGP SIGNATURE-----
Merge tag 'v6.18-rc6' into for-linus
Sync up with the mainline to bring in definition of
INPUT_PROP_HAPTIC_TOUCHPAD.
no_slb_preload cmdline can come useful in quickly disabling and/or
testing the performance impact of userspace slb preloads. Recently there
was a slb multi-hit issue due to slb preload cache which was very
difficult to triage. This cmdline option allows to quickly disable
preloads and verify if the issue exists in preload cache or somewhere
else. This can also be a useful option to see the effect of slb preloads
for any application workload e.g. number of slb faults with or w/o slb
preloads.
with slb_preload:
slb_faults (minimal initrd boot): 15
slb_faults (full systemd boot): 300
with no_slb_preload:
slb_faults (minimal initrd boot): 33
slb_faults (full systemd boot): 138180
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/de484b55c45d831bc2db63945f455153c89a9a65.1761834163.git.ritesh.list@gmail.com
We dropped preload_new_slb_context() & slb_setup_new_exec() in a
previous patch. That means we don't really need preload_add() return
type anymore. So let's make its return type as void.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/88b07223e93b0fc56c1119f6889b7d9c83e20109.1761834163.git.ritesh.list@gmail.com
Update the directMap page counters for Hash. Hash by default always uses
mmu_linear_psize only, for it's directMap. However, once the kernel has
booted and the dmesg log is wrapped over there is no way of knowing the
kernel linear pagesize with Hash mmu. Features like debug_page_alloc can
make mmu_linear_psize to be PAGE_SIZE instead of PMD / PUD mappings. It
would be easier if we have this info printed in proc meminfo similar to
Radix for debugging purposes.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/208e6f946d2ba9c1e2b8b4f665728abe5c891e7c.1761834163.git.ritesh.list@gmail.com
We get below errors when we try to enable debug logs in book3s64/hash_utils.c
This patch fixes these errors related to phys_addr_t printf format.
arch/powerpc/mm/book3s64/hash_utils.c: In function ‘htab_initialize’:
arch/powerpc/mm/book3s64/hash_utils.c:1401:21: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘phys_addr_t’ {aka ‘long long unsigned int’} [-Werror=format=]
1401 | DBG("creating mapping for region: %lx..%lx (prot: %lx)\n",
arch/powerpc/mm/book3s64/hash_utils.c:1401:21: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘phys_addr_t’ {aka ‘long long unsigned int’} [-Werror=format=]
cc1: all warnings being treated as errors
make[6]: *** [../scripts/Makefile.build:287: arch/powerpc/mm/book3s64/hash_utils.o] Error 1
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/4873e9692fc4411099c9741005d218d5e734c345.1761834163.git.ritesh.list@gmail.com
HPTE format was changed since Power9 (ISA 3.0) onwards. While dumping
kernel hash page tables, nothing gets printed on powernv P9+. This patch
utilizes the helpers added in the patch tagged as fixes, to convert new
format to old format and dump the hptes. This fix is only needed for
native_find() (powernv), since pseries continues to work fine with the
old format.
Fixes: 6b243fcfb5 ("powerpc/64: Simplify adaptation to new ISA v3.00 HPTE format")
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/4c2bb9e5b3cfbc0dd80b61b67cdd3ccfc632684c.1761834163.git.ritesh.list@gmail.com
On systems using the hash MMU, there is a software SLB preload cache that
mirrors the entries loaded into the hardware SLB buffer. This preload
cache is subject to periodic eviction — typically after every 256 context
switches — to remove old entry.
To optimize performance, the kernel skips switch_mmu_context() in
switch_mm_irqs_off() when the prev and next mm_struct are the same.
However, on hash MMU systems, this can lead to inconsistencies between
the hardware SLB and the software preload cache.
If an SLB entry for a process is evicted from the software cache on one
CPU, and the same process later runs on another CPU without executing
switch_mmu_context(), the hardware SLB may retain stale entries. If the
kernel then attempts to reload that entry, it can trigger an SLB
multi-hit error.
The following timeline shows how stale SLB entries are created and can
cause a multi-hit error when a process moves between CPUs without a
MMU context switch.
CPU 0 CPU 1
----- -----
Process P
exec swapper/1
load_elf_binary
begin_new_exc
activate_mm
switch_mm_irqs_off
switch_mmu_context
switch_slb
/*
* This invalidates all
* the entries in the HW
* and setup the new HW
* SLB entries as per the
* preload cache.
*/
context_switch
sched_migrate_task migrates process P to cpu-1
Process swapper/0 context switch (to process P)
(uses mm_struct of Process P) switch_mm_irqs_off()
switch_slb
load_slb++
/*
* load_slb becomes 0 here
* and we evict an entry from
* the preload cache with
* preload_age(). We still
* keep HW SLB and preload
* cache in sync, that is
* because all HW SLB entries
* anyways gets evicted in
* switch_slb during SLBIA.
* We then only add those
* entries back in HW SLB,
* which are currently
* present in preload_cache
* (after eviction).
*/
load_elf_binary continues...
setup_new_exec()
slb_setup_new_exec()
sched_switch event
sched_migrate_task migrates
process P to cpu-0
context_switch from swapper/0 to Process P
switch_mm_irqs_off()
/*
* Since both prev and next mm struct are same we don't call
* switch_mmu_context(). This will cause the HW SLB and SW preload
* cache to go out of sync in preload_new_slb_context. Because there
* was an SLB entry which was evicted from both HW and preload cache
* on cpu-1. Now later in preload_new_slb_context(), when we will try
* to add the same preload entry again, we will add this to the SW
* preload cache and then will add it to the HW SLB. Since on cpu-0
* this entry was never invalidated, hence adding this entry to the HW
* SLB will cause a SLB multi-hit error.
*/
load_elf_binary continues...
START_THREAD
start_thread
preload_new_slb_context
/*
* This tries to add a new EA to preload cache which was earlier
* evicted from both cpu-1 HW SLB and preload cache. This caused the
* HW SLB of cpu-0 to go out of sync with the SW preload cache. The
* reason for this was, that when we context switched back on CPU-0,
* we should have ideally called switch_mmu_context() which will
* bring the HW SLB entries on CPU-0 in sync with SW preload cache
* entries by setting up the mmu context properly. But we didn't do
* that since the prev mm_struct running on cpu-0 was same as the
* next mm_struct (which is true for swapper / kernel threads). So
* now when we try to add this new entry into the HW SLB of cpu-0,
* we hit a SLB multi-hit error.
*/
WARNING: CPU: 0 PID: 1810970 at arch/powerpc/mm/book3s64/slb.c:62
assert_slb_presence+0x2c/0x50(48 results) 02:47:29 [20157/42149]
Modules linked in:
CPU: 0 UID: 0 PID: 1810970 Comm: dd Not tainted 6.16.0-rc3-dirty #12
VOLUNTARY
Hardware name: IBM pSeries (emulated by qemu) POWER8 (architected)
0x4d0200 0xf000004 of:SLOF,HEAD hv:linux,kvm pSeries
NIP: c00000000015426c LR: c0000000001543b4 CTR: 0000000000000000
REGS: c0000000497c77e0 TRAP: 0700 Not tainted (6.16.0-rc3-dirty)
MSR: 8000000002823033 <SF,VEC,VSX,FP,ME,IR,DR,RI,LE> CR: 28888482 XER: 00000000
CFAR: c0000000001543b0 IRQMASK: 3
<...>
NIP [c00000000015426c] assert_slb_presence+0x2c/0x50
LR [c0000000001543b4] slb_insert_entry+0x124/0x390
Call Trace:
0x7fffceb5ffff (unreliable)
preload_new_slb_context+0x100/0x1a0
start_thread+0x26c/0x420
load_elf_binary+0x1b04/0x1c40
bprm_execve+0x358/0x680
do_execveat_common+0x1f8/0x240
sys_execve+0x58/0x70
system_call_exception+0x114/0x300
system_call_common+0x160/0x2c4
>From the above analysis, during early exec the hardware SLB is cleared,
and entries from the software preload cache are reloaded into hardware
by switch_slb. However, preload_new_slb_context and slb_setup_new_exec
also attempt to load some of the same entries, which can trigger a
multi-hit. In most cases, these additional preloads simply hit existing
entries and add nothing new. Removing these functions avoids redundant
preloads and eliminates the multi-hit issue. This patch removes these
two functions.
We tested process switching performance using the context_switch
benchmark on POWER9/hash, and observed no regression.
Without this patch: 129041 ops/sec
With this patch: 129341 ops/sec
We also measured SLB faults during boot, and the counts are essentially
the same with and without this patch.
SLB faults without this patch: 19727
SLB faults with this patch: 19786
Fixes: 5434ae7462 ("powerpc/64s/hash: Add a SLB preload cache")
cc: stable@vger.kernel.org
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/0ac694ae683494fe8cadbd911a1a5018d5d3c541.1761834163.git.ritesh.list@gmail.com
On 32-bit book3s with hash-MMUs, tlb_flush() was a no-op. This was
unnoticed because all uses until recently were for unmaps, and thus
handled by __tlb_remove_tlb_entry().
After commit 4a18419f71 ("mm/mprotect: use mmu_gather") in kernel 5.19,
tlb_gather_mmu() started being used for mprotect as well. This caused
mprotect to simply not work on these machines:
int *ptr = mmap(NULL, 4096, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
*ptr = 1; // force HPTE to be created
mprotect(ptr, 4096, PROT_READ);
*ptr = 2; // should segfault, but succeeds
Fixed by making tlb_flush() actually flush TLB pages. This finally
agrees with the behaviour of boot3s64's tlb_flush().
Fixes: 4a18419f71 ("mm/mprotect: use mmu_gather")
Cc: stable@vger.kernel.org
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Dave Vasilevsky <dave@vasilevsky.ca>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20251116-vasi-mprotect-g3-v3-1-59a9bd33ba00@vasilevsky.ca
Turns out the Apple MacPro 6,1 trashcan also needs the inverted jack
detection like Mac mini patched, too.
Signed-off-by: René Rebe <rene@exactco.de>
Cc: <sstable@vger.kernel.org>
Link: https://patch.msgid.link/20251117.182351.1595411649664739497.rene@exactco.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Bind the realtek codec to TAS2781 I2C audio amps on ASUS Xbox Ally
projects. While these projects work without a quirk, adding it increases
the output volume significantly.
Cc: stable@vger.kernel.org # 6.17
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251026191635.2447593-2-lkml@antheas.dev
Currently, on ASUS projects, the TAS2781 codec attaches the speaker GPIO
to the first tasdevice_priv instance using devm. This causes
tas2781_read_acpi to fail on subsequent probes since the GPIO is already
managed by the first device. This causes a failure on Xbox Ally X,
because it has two amplifiers, and prevents us from quirking both the
Xbox Ally and Xbox Ally X in the realtek codec driver.
It is unnecessary to attach the GPIO to a device as it is static.
Therefore, instead of attaching it and then reading it when loading the
firmware, read its value directly in tas2781_read_acpi and store it in
the private data structure. Then, make reading the value non-fatal so
that ASUS projects that miss a speaker pin can still work, perhaps using
fallback firmware.
Fixes: 4e7035a75d ("ALSA: hda/tas2781: Add speaker id check for ASUS projects")
Cc: stable@vger.kernel.org # 6.17
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Reviewed-by: Baojun Xu <baojun.xu@ti.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251026191635.2447593-1-lkml@antheas.dev
Syzkaller triggers an invalid memory access issue following fault
injection in update_effective_progs. The issue can be described as
follows:
__cgroup_bpf_detach
update_effective_progs
compute_effective_progs
bpf_prog_array_alloc <-- fault inject
purge_effective_progs
/* change to dummy_bpf_prog */
array->items[index] = &dummy_bpf_prog.prog
---softirq start---
__do_softirq
...
__cgroup_bpf_run_filter_skb
__bpf_prog_run_save_cb
bpf_prog_run
stats = this_cpu_ptr(prog->stats)
/* invalid memory access */
flags = u64_stats_update_begin_irqsave(&stats->syncp)
---softirq end---
static_branch_dec(&cgroup_bpf_enabled_key[atype])
The reason is that fault injection caused update_effective_progs to fail
and then changed the original prog into dummy_bpf_prog.prog in
purge_effective_progs. Then a softirq came, and accessing the members of
dummy_bpf_prog.prog in the softirq triggers invalid mem access.
To fix it, skip updating stats when stats is NULL.
Fixes: 492ecee892 ("bpf: enable program stats")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20251115102343.2200727-1-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
At this point there are very few call chains that might lead to
d_make_discardable() on a dentry that hadn't been made persistent:
calls of simple_unlink() and simple_rmdir() in configfs and
apparmorfs.
Both filesystems do pin (part of) their contents in dcache, but
they are currently playing very unusual games with that. Converting
them to more usual patterns might be possible, but it's definitely
going to be a long series of changes in both cases.
For now the easiest solution is to have both stop using simple_unlink()
and simple_rmdir() - that allows to make d_make_discardable() warn
when given a non-persistent dentry.
Rather than giving them full-blown private copies (with calls of
d_make_discardable() replaced with dput()), let's pull the parts of
simple_unlink() and simple_rmdir() that deal with timestamps and link
counts into separate helpers (__simple_unlink() and __simple_rmdir()
resp.) and have those used by configfs and apparmorfs.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
securityfs uses simple_recursive_removal(), but does not bother to mark
dentries persistent. This is the only place where it still happens; get
rid of that irregularity.
* use simple_{start,done}_creating() and d_make_persitent(); kill_litter_super()
use was already gone, since we empty the filesystem instance before it gets
shut down.
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Parallel to binderfs stuff:
* use simple_start_creating()/simple_done_creating()/d_make_persistent()
instead of manual inode_lock()/lookup_noperm()/d_instanitate()/inode_unlock().
* allocate inode first - simpler cleanup that way.
* use simple_recursive_removal() instead of open-coding it.
* switch to kill_anon_super()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
One instance per net-ns. There's a fixed subset (several files in root,
an optional symlink in root + initially empty /clients/) + per-client
subdirectory in /clients/. Clients can appear only after the filesystem
is there and they are all gone before it gets through ->kill_sb().
Fixed subset created in fill_super(), regular files by simple_fill_super(),
then a subdirectory and a symlink - manually. It is removed by
kill_litter_super().
Per-client subdirectories are created by nfsd_client_mkdir() (populated
with client-supplied list of files in them). Removed by nfsd_client_rmdir(),
which is simple_recursive_removal().
All dentries except for the ones from simple_fill_super() come from
* nfsd_mkdir() (subdirectory, dentry from simple_start_creating()).
Called from fill_super() (creates initially empty /clients)
and from nfsd_client_mkdir (creates a per-client subdirectory
in /clients).
* _nfsd_symlink() (symlink, dentry from simple_start_creating()), called
from fill_super().
* nfsdfs_create_files() (regulars, dentry from simple_start_creating()),
called only from nfsd_client_mkdir().
Turn d_instatiate() + inode_unlock() into d_make_persistent() + simple_done_creating()
in nfsd_mkdir(), _nfsd_symlink() and nfsdfs_create_files() and we are done.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Just use d_make_persistent() + dput() (and fold the latter into
simple_finish_creating()) and that's it...
NOTE: pipe->dentry is a borrowed reference - it does not contribute
to dentry refcount.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
just have hypfs_create_file() do the usual simple_start_creating()/
d_make_persistent()/simple_done_creating() and that's it
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
hypfs dentries end up with refcount 2 when they are not busy.
Refcount 1 is enough to keep them pinned, and going that way
allows to simplify things nicely:
* don't need to drop an extra reference before the
call of kill_litter_super() in ->kill_sb(); all we need
there is to reset the cleanup list - everything on it will
be taken out automatically.
* we can make use of simple_recursive_removal() on
tree rebuilds; just make sure that only children of root
end up in the cleanup list and hypfs_delete_tree() becomes
much simpler
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
All files are regular; ep0 is there all along, other ep* may appear
and go away during the filesystem lifetime; all of those are guaranteed
to be gone by the time we umount it.
Object creation is in ffs_sb_create_file(), removals - at ->kill_sb()
time (for ep0) or by simple_remove_by_name() from ffs_epfiles_destroy()
(for the rest of them).
Switch ffs_sb_create_file() to simple_start_creating()/d_make_persistent()/
simple_done_creating() and that's it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
No need to return dentry from ffs_sb_create_file() or keep it around
afterwards.
To avoid subtle issues with getting to ffs from epfiles in
ffs_epfiles_destroy(), pass the superblock as explicit argument.
Callers have it anyway.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
