[ Upstream commit dcd21b609d ]
The Linux client assumes that all filehandles are non-volatile for
renames within the same directory (otherwise sillyrename cannot work).
However, the existence of the Linux 'subtree_check' export option has
meant that nfs_rename() has always assumed it needs to flush writes
before attempting to rename.
Since NFSv4 does allow the client to query whether or not the server
exhibits this behaviour, and since knfsd does actually set the
appropriate flag when 'subtree_check' is enabled on an export, it
should be OK to optimise away the write flushing behaviour in the cases
where it is clearly not needed.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b5325b2a27 upstream.
Give userspace a way to instruct the kernel to install a pidfd into the
usermode helper process. This makes coredump handling a lot more
reliable for userspace. In parallel with this commit we already have
systemd adding support for this in [1].
We create a pidfs file for the coredumping process when we process the
corename pattern. When the usermode helper process is forked we then
install the pidfs file as file descriptor three into the usermode
helpers file descriptor table so it's available to the exec'd program.
Since usermode helpers are either children of the system_unbound_wq
workqueue or kthreadd we know that the file descriptor table is empty
and can thus always use three as the file descriptor number.
Note, that we'll install a pidfd for the thread-group leader even if a
subthread is calling do_coredump(). We know that task linkage hasn't
been removed due to delay_group_leader() and even if this @current isn't
the actual thread-group leader we know that the thread-group leader
cannot be reaped until @current has exited.
[brauner: This is a backport for the v6.6 series. Upsteam has
significantly changed and backporting all that infra is a non-starter.
So simply use the pidfd_prepare() helper and waste the file descriptor
we allocated. Then we minimally massage the umh coredump setup code.]
Link: https://github.com/systemd/systemd/pull/37125 [1]
Link: https://lore.kernel.org/20250414-work-coredump-v2-3-685bf231f828@kernel.org
Tested-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53dac34539 upstream.
hrtimers are migrated away from the dying CPU to any online target at
the CPUHP_AP_HRTIMERS_DYING stage in order not to delay bandwidth timers
handling tasks involved in the CPU hotplug forward progress.
However wakeups can still be performed by the outgoing CPU after
CPUHP_AP_HRTIMERS_DYING. Those can result again in bandwidth timers being
armed. Depending on several considerations (crystal ball power management
based election, earliest timer already enqueued, timer migration enabled or
not), the target may eventually be the current CPU even if offline. If that
happens, the timer is eventually ignored.
The most notable example is RCU which had to deal with each and every of
those wake-ups by deferring them to an online CPU, along with related
workarounds:
_ e787644caf (rcu: Defer RCU kthreads wakeup when CPU is dying)
_ 9139f93209 (rcu/nocb: Fix RT throttling hrtimer armed from offline CPU)
_ f7345ccc62 (rcu/nocb: Fix rcuog wake-up from offline softirq)
The problem isn't confined to RCU though as the stop machine kthread
(which runs CPUHP_AP_HRTIMERS_DYING) reports its completion at the end
of its work through cpu_stop_signal_done() and performs a wake up that
eventually arms the deadline server timer:
WARNING: CPU: 94 PID: 588 at kernel/time/hrtimer.c:1086 hrtimer_start_range_ns+0x289/0x2d0
CPU: 94 UID: 0 PID: 588 Comm: migration/94 Not tainted
Stopper: multi_cpu_stop+0x0/0x120 <- stop_machine_cpuslocked+0x66/0xc0
RIP: 0010:hrtimer_start_range_ns+0x289/0x2d0
Call Trace:
<TASK>
start_dl_timer
enqueue_dl_entity
dl_server_start
enqueue_task_fair
enqueue_task
ttwu_do_activate
try_to_wake_up
complete
cpu_stopper_thread
Instead of providing yet another bandaid to work around the situation, fix
it in the hrtimers infrastructure instead: always migrate away a timer to
an online target whenever it is enqueued from an offline CPU.
This will also allow to revert all the above RCU disgraceful hacks.
Fixes: 5c0930ccaa ("hrtimers: Push pending hrtimers away from outgoing CPU earlier")
Reported-by: Vlad Poenaru <vlad.wing@gmail.com>
Reported-by: Usama Arif <usamaarif642@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/all/20250117232433.24027-1-frederic@kernel.org
Closes: 20241213203739.1519801-1-usamaarif642@gmail.com
Signed-off-by: Zhaoyang Li <lizy04@hust.edu.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 97dfbbd135 upstream.
In commit c749d9b7eb ("iov_iter: fix copy_page_from_iter_atomic() if
KMAP_LOCAL_FORCE_MAP"), Hugh correctly noted that if KMAP_LOCAL_FORCE_MAP
is enabled, we must limit ourselves to PAGE_SIZE bytes per call to
kmap_local(). The same problem exists in memcpy_from_folio(),
memcpy_to_folio(), folio_zero_tail(), folio_fill_tail() and
memcpy_from_file_folio(), so add folio_test_partial_kmap() to do this more
succinctly.
Link: https://lkml.kernel.org/r/20250514170607.3000994-2-willy@infradead.org
Fixes: 00cdf76012 ("mm: add memcpy_from_file_folio()")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8ce939a0fa ]
The event may have been updated in the PMU-specific implementation,
e.g., Intel PEBS counters snapshotting. The common code should not
read and overwrite the value.
The PERF_SAMPLE_READ in the data->sample_type can be used to detect
whether the PMU-specific value is available. If yes, avoid the
pmu->read() in the common code. Add a new flag, skip_read, to track the
case.
Factor out a perf_pmu_read() to clean up the code.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250121152303.3128733-3-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad6b5b73ff ]
rcu_all_qs() is defined for !CONFIG_PREEMPT_RCU but the declaration
is conditioned on CONFIG_PREEMPTION.
With CONFIG_PREEMPT_LAZY, CONFIG_PREEMPTION=y does not imply
CONFIG_PREEMPT_RCU=y.
Decouple the two.
Cc: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fcf0e25ad4 ]
rcu_read_unlock_strict() can be called with preemption enabled
which can make for an unstable rdp and a racy norm value.
Fix this by dropping the preempt-count in __rcu_read_unlock()
after the call to rcu_read_unlock_strict(), adjusting the
preempt-count check appropriately.
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 848b09d53d ]
The Dell AW1022z is an RTL8156B based 2.5G Ethernet controller.
Add the vendor and product ID values to the driver. This makes Ethernet
work with the adapter.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://patch.msgid.link/20250206224033.980115-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a6f18f286 ]
GCC can see that the value range for "order" is capped, but this leads
it to consider that it might be negative, leading to a false positive
warning (with GCC 15 with -Warray-bounds -fdiagnostics-details):
../drivers/net/ethernet/mellanox/mlx4/alloc.c:691:47: error: array subscript -1 is below array bounds of 'long unsigned int *[2]' [-Werror=array-bounds=]
691 | i = find_first_bit(pgdir->bits[o], MLX4_DB_PER_PAGE >> o);
| ~~~~~~~~~~~^~~
'mlx4_alloc_db_from_pgdir': events 1-2
691 | i = find_first_bit(pgdir->bits[o], MLX4_DB_PER_PAGE >> o); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| | | | | (2) out of array bounds here
| (1) when the condition is evaluated to true In file included from ../drivers/net/ethernet/mellanox/mlx4/mlx4.h:53,
from ../drivers/net/ethernet/mellanox/mlx4/alloc.c:42:
../include/linux/mlx4/device.h:664:33: note: while referencing 'bits'
664 | unsigned long *bits[2];
| ^~~~
Switch the argument to unsigned int, which removes the compiler needing
to consider negative values.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250210174504.work.075-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f7df3a691 ]
The IOMMU translation for MSI message addresses has been a 2-step process,
separated in time:
1) iommu_dma_prepare_msi(): A cookie pointer containing the IOVA address
is stored in the MSI descriptor when an MSI interrupt is allocated.
2) iommu_dma_compose_msi_msg(): this cookie pointer is used to compute a
translated message address.
This has an inherent lifetime problem for the pointer stored in the cookie
that must remain valid between the two steps. However, there is no locking
at the irq layer that helps protect the lifetime. Today, this works under
the assumption that the iommu domain is not changed while MSI interrupts
being programmed. This is true for normal DMA API users within the kernel,
as the iommu domain is attached before the driver is probed and cannot be
changed while a driver is attached.
Classic VFIO type1 also prevented changing the iommu domain while VFIO was
running as it does not support changing the "container" after starting up.
However, iommufd has improved this so that the iommu domain can be changed
during VFIO operation. This potentially allows userspace to directly race
VFIO_DEVICE_ATTACH_IOMMUFD_PT (which calls iommu_attach_group()) and
VFIO_DEVICE_SET_IRQS (which calls into iommu_dma_compose_msi_msg()).
This potentially causes both the cookie pointer and the unlocked call to
iommu_get_domain_for_dev() on the MSI translation path to become UAFs.
Fix the MSI cookie UAF by removing the cookie pointer. The translated IOVA
address is already known during iommu_dma_prepare_msi() and cannot change.
Thus, it can simply be stored as an integer in the MSI descriptor.
The other UAF related to iommu_get_domain_for_dev() will be addressed in
patch "iommu: Make iommu_dma_prepare_msi() into a generic operation" by
using the IOMMU group mutex.
Link: https://patch.msgid.link/r/a4f2cd76b9dc1833ee6c1cf325cba57def22231c.1740014950.git.nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80df31f384 ]
Change POOL_NEXT_SIZE define value from 0 to BIT(30), since this define
is used to request the available maximum sized flow table, and zero doesn't
make sense for it, whereas some places in the driver use zero explicitly
expecting the smallest table size possible but instead due to this
define they end up allocating the biggest table size unawarely.
In addition move the definition to "include/linux/mlx5/fs.h" to expose the
define to IB driver as well, while appropriately renaming it.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250219085808.349923-3-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc47f07234 ]
Unlike the decompression code, the compression code in LZO never
checked for output overruns. It instead assumes that the caller
always provides enough buffer space, disregarding the buffer length
provided by the caller.
Add a safe compression interface that checks for the end of buffer
before each write. Use the safe interface in crypto/lzo.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a18dfa9925 ]
When spanning datagram construction over multiple send calls using
MSG_MORE, per datagram settings are configured on the first send.
That is when ip(6)_setup_cork stores these settings for subsequent use
in __ip(6)_append_data and others.
The only flag that escaped this was dontfrag. As a result, a datagram
could be constructed with df=0 on the first sendmsg, but df=1 on a
next. Which is what cmsg_ip.sh does in an upcoming MSG_MORE test in
the "diff" scenario.
Changing datagram conditions in the middle of constructing an skb
makes this already complex code path even more convoluted. It is here
unintentional. Bring this flag in line with expected sockopt/cmsg
behavior.
And stop passing ipc6 to __ip6_append_data, to avoid such issues
in the future. This is already the case for __ip_append_data.
inet6_cork had a 6 byte hole, so the 1B flag has no impact.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250307033620.411611-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b82b181a2 ]
Currently for bpf progs in a cgroup hierarchy, the effective prog array
is computed from bottom cgroup to upper cgroups (post-ordering). For
example, the following cgroup hierarchy
root cgroup: p1, p2
subcgroup: p3, p4
have BPF_F_ALLOW_MULTI for both cgroup levels.
The effective cgroup array ordering looks like
p3 p4 p1 p2
and at run time, progs will execute based on that order.
But in some cases, it is desirable to have root prog executes earlier than
children progs (pre-ordering). For example,
- prog p1 intends to collect original pkt dest addresses.
- prog p3 will modify original pkt dest addresses to a proxy address for
security reason.
The end result is that prog p1 gets proxy address which is not what it
wants. Putting p1 to every child cgroup is not desirable either as it
will duplicate itself in many child cgroups. And this is exactly a use case
we are encountering in Meta.
To fix this issue, let us introduce a flag BPF_F_PREORDER. If the flag
is specified at attachment time, the prog has higher priority and the
ordering with that flag will be from top to bottom (pre-ordering).
For example, in the above example,
root cgroup: p1, p2
subcgroup: p3, p4
Let us say p2 and p4 are marked with BPF_F_PREORDER. The final
effective array ordering will be
p2 p4 p3 p1
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250224230116.283071-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 196a062641 ]
Binary printing functions are using printf() type of format, and compiler
is not happy about them as is:
kernel/trace/trace.c:3292:9: error: function ‘trace_vbprintk’ might be a candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
kernel/trace/trace_seq.c:182:9: error: function ‘trace_seq_bprintf’ might be a candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
Fix the compilation errors by adding __printf() attribute.
While at it, move existing __printf() attributes from the implementations
to the declarations. IT also fixes incorrect attribute parameters that are
used for trace_array_printk().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250321144822.324050-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9b19ea630 ]
When CONFIG_NEED_DMA_MAP_STATE is not defined, dma-mapping clients might
report unused data compilation warnings for dma_unmap_*() calls
arguments. Redefine macros for those calls to let compiler to notice that
it is okay when the provided arguments are not used.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250415075659.428549-1-m.szyprowski@samsung.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e8007fad54 upstream.
The REPORT ZONES buffer size is currently limited by the HBA's maximum
segment count to ensure the buffer can be mapped. However, the block
layer further limits the number of iovec entries to 1024 when allocating
a bio.
To avoid allocation of buffers too large to be mapped, further restrict
the maximum buffer size to BIO_MAX_INLINE_VECS.
Replace the UIO_MAXIOV symbolic name with the more contextually
appropriate BIO_MAX_INLINE_VECS.
Fixes: b091ac6168 ("sd_zbc: Fix report zones buffer allocation")
Cc: stable@vger.kernel.org
Signed-off-by: Steve Siwinski <ssiwinski@atto.com>
Link: https://lore.kernel.org/r/20250508200122.243129-1-ssiwinski@atto.com
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45a442fe36 upstream.
With the netvsc driver changed to use vmbus_sendpacket_mpb_desc()
instead of vmbus_sendpacket_pagebuffer(), the latter has no remaining
callers. Remove it.
Cc: <stable@vger.kernel.org> # 6.1.x
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20250513000604.1396-6-mhklinux@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2f661f71fd ]
With some Infineon chips the timeouts in tpm_tis_send_data (both B and
C) can reach up to about 2250 ms.
Timeout C is retried since
commit de9e33df77 ("tpm, tpm_tis: Workaround failed command reception on Infineon devices")
Timeout B still needs to be extended.
The problem is most commonly encountered with context related operation
such as load context/save context. These are issued directly by the
kernel, and there is no retry logic for them.
When a filesystem is set up to use the TPM for unlocking the boot fails,
and restarting the userspace service is ineffective. This is likely
because ignoring a load context/save context result puts the real TPM
state and the TPM state expected by the kernel out of sync.
Chips known to be affected:
tpm_tis IFX1522:00: 2.0 TPM (device-id 0x1D, rev-id 54)
Description: SLB9672
Firmware Revision: 15.22
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 22)
Firmware Revision: 7.83
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16)
Firmware Revision: 5.63
Link: https://lore.kernel.org/linux-integrity/Z5pI07m0Muapyu9w@kitsune.suse.cz/
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 872df34d7c upstream.
ITS mitigation moves the unsafe indirect branches to a safe thunk. This
could degrade the prediction accuracy as the source address of indirect
branches becomes same for different execution paths.
To improve the predictions, and hence the performance, assign a separate
thunk for each indirect callsite. This is also a defense-in-depth measure
to avoid indirect branches aliasing with each other.
As an example, 5000 dynamic thunks would utilize around 16 bits of the
address space, thereby gaining entropy. For a BTB that uses
32 bits for indexing, dynamic thunks could provide better prediction
accuracy over fixed thunks.
Have ITS thunks be variable sized and use EXECMEM_MODULE_TEXT such that
they are both more flexible (got to extend them later) and live in 2M TLBs,
just like kernel code, avoiding undue TLB pressure.
[ pawan: CONFIG_EXECMEM and CONFIG_EXECMEM_ROX are not supported on
backport kernel, made changes to use module_alloc() and
set_memory_*() for dynamic thunks. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4818881c4 upstream.
Indirect Target Selection (ITS) is a bug in some pre-ADL Intel CPUs with
eIBRS. It affects prediction of indirect branch and RETs in the
lower half of cacheline. Due to ITS such branches may get wrongly predicted
to a target of (direct or indirect) branch that is located in the upper
half of the cacheline.
Scope of impact
===============
Guest/host isolation
--------------------
When eIBRS is used for guest/host isolation, the indirect branches in the
VMM may still be predicted with targets corresponding to branches in the
guest.
Intra-mode
----------
cBPF or other native gadgets can be used for intra-mode training and
disclosure using ITS.
User/kernel isolation
---------------------
When eIBRS is enabled user/kernel isolation is not impacted.
Indirect Branch Prediction Barrier (IBPB)
-----------------------------------------
After an IBPB, indirect branches may be predicted with targets
corresponding to direct branches which were executed prior to IBPB. This is
mitigated by a microcode update.
Add cmdline parameter indirect_target_selection=off|on|force to control the
mitigation to relocate the affected branches to an ITS-safe thunk i.e.
located in the upper half of cacheline. Also add the sysfs reporting.
When retpoline mitigation is deployed, ITS safe-thunks are not needed,
because retpoline sequence is already ITS-safe. Similarly, when call depth
tracking (CDT) mitigation is deployed (retbleed=stuff), ITS safe return
thunk is not used, as CDT prevents RSB-underflow.
To not overcomplicate things, ITS mitigation is not supported with
spectre-v2 lfence;jmp mitigation. Moreover, it is less practical to deploy
lfence;jmp mitigation on ITS affected parts anyways.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e4ca0e59c3 ]
Some user may want to use aligned signed 64-bit type.
Provide it for them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240903180218.3640501-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 1bb942287e ("iio: accel: adxl355: Make timestamp 64-bit aligned using aligned_s64")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3dc95a3edd ]
Add a shorthand similar to other net*_subqueue() helpers for resetting
the queue by its index w/o obtaining &netdev_tx_queue beforehand
manually.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: 4db6c75124 ("net: ethernet: mtk_eth_soc: reset all TX queues on DMA free")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c76c813cf ]
lookup_or_create_module_kobject() is marked as static and __init,
to make it global drop static keyword.
Since this function can be called from non-init code, use __modinit
instead of __init, __modinit marker will make it __init if
CONFIG_MODULES is not defined.
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Shyam Saini <shyamsaini@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250227184930.34163-4-shyamsaini@linux.microsoft.com
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Stable-dep-of: f95bbfe185 ("drivers: base: handle module_kobject creation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7b5bd725b ]
Similar to what we do in the AdminQ, check for devcmd health
while waiting for an answer.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: dfd76010f8 ("pds_core: remove write-after-free of client_id")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d25ca2d68 ]
mono_delivery_time was added to check if skb->tstamp has delivery
time in mono clock base (i.e. EDT) otherwise skb->tstamp has
timestamp in ingress and delivery_time at egress.
Renaming the bitfield from mono_delivery_time to tstamp_type is for
extensibilty for other timestamps such as userspace timestamp
(i.e. SO_TXTIME) set via sock opts.
As we are renaming the mono_delivery_time to tstamp_type, it makes
sense to start assigning tstamp_type based on enum defined
in this commit.
Earlier we used bool arg flag to check if the tstamp is mono in
function skb_set_delivery_time, Now the signature of the functions
accepts tstamp_type to distinguish between mono and real time.
Also skb_set_delivery_type_by_clockid is a new function which accepts
clockid to determine the tstamp_type.
In future tstamp_type:1 can be extended to support userspace timestamp
by increasing the bitfield.
Signed-off-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240509211834.3235191-2-quic_abchauha@quicinc.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Stable-dep-of: 3908feb1bd ("Bluetooth: L2CAP: copy RX timestamp to new fragments")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 81f6d0530b upstream.
When processing calls to global sub-programs, verifier decides whether
to invalidate all packet pointers in current state depending on the
changes_pkt_data property of the global sub-program.
Because of this, an extension program replacing a global sub-program
must be compatible with changes_pkt_data property of the sub-program
being replaced.
This commit:
- adds changes_pkt_data flag to struct bpf_prog_aux:
- this flag is set in check_cfg() for main sub-program;
- in jit_subprogs() for other sub-programs;
- modifies bpf_check_attach_btf_id() to check changes_pkt_data flag;
- moves call to check_attach_btf_id() after the call to check_cfg(),
because it needs changes_pkt_data flag to be set:
bpf_check:
... ...
- check_attach_btf_id resolve_pseudo_ldimm64
resolve_pseudo_ldimm64 --> bpf_prog_is_offloaded
bpf_prog_is_offloaded check_cfg
check_cfg + check_attach_btf_id
... ...
The following fields are set by check_attach_btf_id():
- env->ops
- prog->aux->attach_btf_trace
- prog->aux->attach_func_name
- prog->aux->attach_func_proto
- prog->aux->dst_trampoline
- prog->aux->mod
- prog->aux->saved_dst_attach_type
- prog->aux->saved_dst_prog_type
- prog->expected_attach_type
Neither of these fields are used by resolve_pseudo_ldimm64() or
bpf_prog_offload_verifier_prep() (for netronome and netdevsim
drivers), so the reordering is safe.
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[ shung-hsi.yu: adapt to missing fields in "struct bpf_prog_aux". Context
difference in jit_subprogs() because BPF Exception is not supported. Context
difference in bpf_check() because commit 5b5f51bff1 "bpf:
no_caller_saved_registers attribute for helper calls" is not present. ]
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51081a3f25 upstream.
When processing calls to certain helpers, verifier invalidates all
packet pointers in a current state. For example, consider the
following program:
__attribute__((__noinline__))
long skb_pull_data(struct __sk_buff *sk, __u32 len)
{
return bpf_skb_pull_data(sk, len);
}
SEC("tc")
int test_invalidate_checks(struct __sk_buff *sk)
{
int *p = (void *)(long)sk->data;
if ((void *)(p + 1) > (void *)(long)sk->data_end) return TCX_DROP;
skb_pull_data(sk, 0);
*p = 42;
return TCX_PASS;
}
After a call to bpf_skb_pull_data() the pointer 'p' can't be used
safely. See function filter.c:bpf_helper_changes_pkt_data() for a list
of such helpers.
At the moment verifier invalidates packet pointers when processing
helper function calls, and does not traverse global sub-programs when
processing calls to global sub-programs. This means that calls to
helpers done from global sub-programs do not invalidate pointers in
the caller state. E.g. the program above is unsafe, but is not
rejected by verifier.
This commit fixes the omission by computing field
bpf_subprog_info->changes_pkt_data for each sub-program before main
verification pass.
changes_pkt_data should be set if:
- subprogram calls helper for which bpf_helper_changes_pkt_data
returns true;
- subprogram calls a global function,
for which bpf_subprog_info->changes_pkt_data should be set.
The verifier.c:check_cfg() pass is modified to compute this
information. The commit relies on depth first instruction traversal
done by check_cfg() and absence of recursive function calls:
- check_cfg() would eventually visit every call to subprogram S in a
state when S is fully explored;
- when S is fully explored:
- every direct helper call within S is explored
(and thus changes_pkt_data is set if needed);
- every call to subprogram S1 called by S was visited with S1 fully
explored (and thus S inherits changes_pkt_data from S1).
The downside of such approach is that dead code elimination is not
taken into account: if a helper call inside global function is dead
because of current configuration, verifier would conservatively assume
that the call occurs for the purpose of the changes_pkt_data
computation.
Reported-by: Nick Zavaritsky <mejedi@gmail.com>
Closes: https://lore.kernel.org/bpf/0498CA22-5779-4767-9C0C-A9515CEA711F@gmail.com/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[shung-hsi.yu: do not use bitfield in "struct bpf_subprog_info" because commit
406a6fa44b ("bpf: use bitfields for simple per-subprog bool flags") is not
present and minor context difference in check_func_call() because commit
491dd8edec ("bpf: Emit global subprog name in verifier logs") is not present. ]
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b238e187b4 upstream.
Use BPF helper number instead of function pointer in
bpf_helper_changes_pkt_data(). This would simplify usage of this
function in verifier.c:check_cfg() (in a follow-up patch),
where only helper number is easily available and there is no real need
to lookup helper proto.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b79028039f upstream.
Commit 7491cdf46b ("cpufreq: Avoid using inconsistent policy->min and
policy->max") overlooked the fact that policy->min and policy->max were
accessed directly in cpufreq_frequency_table_target() and in the
functions called by it. Consequently, the changes made by that commit
led to problems with setting policy limits.
Address this by passing the target frequency limits to __resolve_freq()
and cpufreq_frequency_table_target() and propagating them to the
functions called by the latter.
Fixes: 7491cdf46b ("cpufreq: Avoid using inconsistent policy->min and policy->max")
Cc: 5.16+ <stable@vger.kernel.org> # 5.16+
Closes: https://lore.kernel.org/linux-pm/aAplED3IA_J0eZN0@linaro.org/
Reported-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/5896780.DvuYhMxLoT@rjwysocki.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9c0b4bb7f6 ]
The current method to take into account uclamp hints when estimating the
target frequency can end in a situation where the selected target
frequency is finally higher than uclamp hints, whereas there are no real
needs. Such cases mainly happen because we are currently mixing the
traditional scheduler utilization signal with the uclamp performance
hints. By adding these 2 metrics, we loose an important information when
it comes to select the target frequency, and we have to make some
assumptions which can't fit all cases.
Rework the interface between the scheduler and schedutil governor in order
to propagate all information down to the cpufreq governor.
effective_cpu_util() interface changes and now returns the actual
utilization of the CPU with 2 optional inputs:
- The minimum performance for this CPU; typically the capacity to handle
the deadline task and the interrupt pressure. But also uclamp_min
request when available.
- The maximum targeting performance for this CPU which reflects the
maximum level that we would like to not exceed. By default it will be
the CPU capacity but can be reduced because of some performance hints
set with uclamp. The value can be lower than actual utilization and/or
min performance level.
A new sugov_effective_cpu_perf() interface is also available to compute
the final performance level that is targeted for the CPU, after applying
some cpufreq headroom and taking into account all inputs.
With these 2 functions, schedutil is now able to decide when it must go
above uclamp hints. It now also has a generic way to get the min
performance level.
The dependency between energy model and cpufreq governor and its headroom
policy doesn't exist anymore.
eenv_pd_max_util() asks schedutil for the targeted performance after
applying the impact of the waking task.
[ mingo: Refined the changelog & C comments. ]
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20231122133904.446032-2-vincent.guittot@linaro.org
Stable-dep-of: 79443a7e9d ("cpufreq/sched: Explicitly synchronize limits_changed flag handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd35b6cb46 ]
nfs.ko, nfsd.ko, and lockd.ko all use crc32_le(), which is available
only when CONFIG_CRC32 is enabled. But the only NFS kconfig option that
selected CONFIG_CRC32 was CONFIG_NFS_DEBUG, which is client-specific and
did not actually guard the use of crc32_le() even on the client.
The code worked around this bug by only actually calling crc32_le() when
CONFIG_CRC32 is built-in, instead hard-coding '0' in other cases. This
avoided randconfig build errors, and in real kernels the fallback code
was unlikely to be reached since CONFIG_CRC32 is 'default y'. But, this
really needs to just be done properly, especially now that I'm planning
to update CONFIG_CRC32 to not be 'default y'.
Therefore, make CONFIG_NFS_FS, CONFIG_NFSD, and CONFIG_LOCKD select
CONFIG_CRC32. Then remove the fallback code that becomes unnecessary,
as well as the selection of CONFIG_CRC32 from CONFIG_NFS_DEBUG.
Fixes: 1264a2f053 ("NFS: refactor code for calculating the crc32 hash of a filehandle")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9e888998ea upstream.
inode_to_wb() is used also for filesystems that don't support cgroup
writeback. For these filesystems inode->i_wb is stable during the
lifetime of the inode (it points to bdi->wb) and there's no need to hold
locks protecting the inode->i_wb dereference. Improve the warning in
inode_to_wb() to not trigger for these filesystems.
Link: https://lkml.kernel.org/r/20250412163914.3773459-3-agruenba@redhat.com
Fixes: aaa2cacf81 ("writeback: add lockdep annotation to inode_to_wb()")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 691ee97e1a upstream.
Patch series "Fix lazy mmu mode", v2.
I'm planning to implement lazy mmu mode for arm64 to optimize vmalloc. As
part of that, I will extend lazy mmu mode to cover kernel mappings in
vmalloc table walkers. While lazy mmu mode is already used for kernel
mappings in a few places, this will extend it's use significantly.
Having reviewed the existing lazy mmu implementations in powerpc, sparc
and x86, it looks like there are a bunch of bugs, some of which may be
more likely to trigger once I extend the use of lazy mmu. So this series
attempts to clarify the requirements and fix all the bugs in advance of
that series. See patch #1 commit log for all the details.
This patch (of 5):
The docs, implementations and use of arch_[enter|leave]_lazy_mmu_mode() is
a bit of a mess (to put it politely). There are a number of issues
related to nesting of lazy mmu regions and confusion over whether the
task, when in a lazy mmu region, is preemptible or not. Fix all the
issues relating to the core-mm. Follow up commits will fix the
arch-specific implementations. 3 arches implement lazy mmu; powerpc,
sparc and x86.
When arch_[enter|leave]_lazy_mmu_mode() was first introduced by commit
6606c3e0da ("[PATCH] paravirt: lazy mmu mode hooks.patch"), it was
expected that lazy mmu regions would never nest and that the appropriate
page table lock(s) would be held while in the region, thus ensuring the
region is non-preemptible. Additionally lazy mmu regions were only used
during manipulation of user mappings.
Commit 38e0edb15b ("mm/apply_to_range: call pte function with lazy
updates") started invoking the lazy mmu mode in apply_to_pte_range(),
which is used for both user and kernel mappings. For kernel mappings the
region is no longer protected by any lock so there is no longer any
guarantee about non-preemptibility. Additionally, for RT configs, the
holding the PTL only implies no CPU migration, it doesn't prevent
preemption.
Commit bcc6cc8325 ("mm: add default definition of set_ptes()") added
arch_[enter|leave]_lazy_mmu_mode() to the default implementation of
set_ptes(), used by x86. So after this commit, lazy mmu regions can be
nested. Additionally commit 1a10a44dfc ("sparc64: implement the new
page table range API") and commit 9fee28baa6 ("powerpc: implement the
new page table range API") did the same for the sparc and powerpc
set_ptes() overrides.
powerpc couldn't deal with preemption so avoids it in commit b9ef323ea1
("powerpc/64s: Disable preemption in hash lazy mmu mode"), which
explicitly disables preemption for the whole region in its implementation.
x86 can support preemption (or at least it could until it tried to add
support nesting; more on this below). Sparc looks to be totally broken in
the face of preemption, as far as I can tell.
powerpc can't deal with nesting, so avoids it in commit 47b8def935
("powerpc/mm: Avoid calling arch_enter/leave_lazy_mmu() in set_ptes"),
which removes the lazy mmu calls from its implementation of set_ptes().
x86 attempted to support nesting in commit 49147beb0c ("x86/xen: allow
nesting of same lazy mode") but as far as I can tell, this breaks its
support for preemption.
In short, it's all a mess; the semantics for
arch_[enter|leave]_lazy_mmu_mode() are not clearly defined and as a result
the implementations all have different expectations, sticking plasters and
bugs.
arm64 is aiming to start using these hooks, so let's clean everything up
before adding an arm64 implementation. Update the documentation to state
that lazy mmu regions can never be nested, must not be called in interrupt
context and preemption may or may not be enabled for the duration of the
region. And fix the generic implementation of set_ptes() to avoid
nesting.
arch-specific fixes to conform to the new spec will proceed this one.
These issues were spotted by code review and I have no evidence of issues
being reported in the wild.
Link: https://lkml.kernel.org/r/20250303141542.3371656-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20250303141542.3371656-2-ryan.roberts@arm.com
Fixes: bcc6cc8325 ("mm: add default definition of set_ptes()")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juegren Gross <jgross@suse.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit de9e33df77 ]
Some Infineon devices have a issue where the status register will get
stuck with a quick REQUEST_USE / COMMAND_READY sequence. This is not
simply a matter of requiring a longer timeout; the work around is to
retry the command submission. Add appropriate logic to do this in the
send path.
This is fixed in later firmware revisions, but those are not always
available, and cannot generally be easily updated from outside a
firmware environment.
Testing has been performed with a simple repeated loop of doing a
TPM2_CC_GET_CAPABILITY for TPM_CAP_PROP_MANUFACTURER using the Go code
at:
https://the.earth.li/~noodles/tpm-stuff/timeout-reproducer-simple.go
It can take several hours to reproduce, and several million operations.
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abdbf8764f ]
Some devices only support SINE periodic effect although they advertise
support for all PERIODIC effect in their HID descriptor. Some just do
nothing when trying to play such an effect (upload goes fine), some express
undefined behavior like turning to one side.
This quirk forces all the periodic effects to be uploaded as SINE. This is
acceptable as all these effects are similar in nature and are mostly used as
rumble. SINE is the most popular with others seldom used (especially SAW_UP
and SAW_DOWN).
Fixes periodic effects for PXN and LITE STAR wheels
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3051bf5ec7 ]
Most steering wheels simply ignore DIRECTION field, but some try to be
compliant with the PID standard and use it in force calculations. Games
often ignore setting this field properly and/or there can be issues with
dinput8 -> wine -> SDL -> Linux API translation, and this value can be
incorrect. This can lead to partial/complete loss of Force Feedback or
even unexpected force reversal.
Sadly, this quirk can't be detected automatically without sending out
effects that would move an axis.
This fixes FFB on Moza Racing devices and others where effect direction
is not simply ignored.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36de0164bb ]
This lays out a way to provide an initial set of quirks to enable before
device initialization takes place. GPL symbol export needed for the
possibility of building HID drivers which use this function as modules.
Adding a wrapper function to ensure compatibility with the old behavior
of hid_pidff_init.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4119108d2 ]
With this quirk, a PID device isn't required to have a strict
logical_minimum of 1 for the the PID_DEVICE_CONTROL usage page.
Some devices come with weird values in their device descriptors and
this quirk enables their initialization even if the logical minimum
of the DEVICE_CONTROL page is not 1.
Fixes initialization of VRS Direct Force Pro
Changes in v6:
- Change quirk name to better reflect it's intention
Co-developed-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc7c154e9b ]
Some devices with only one axis are missing PARAMETER_BLOCK_OFFSET field
for conditional effects. They can only have one axis, so we're limiting
the max_axis when setting the report for those effects.
Automatic detection ensures compatibility even if such device won't be
explicitly defined in the kernel.
Fixes initialization of VRS DirectForce PRO and possibly other devices.
Changes in v6:
- Fixed NULL pointer dereference. When PBO is missing, make sure not
to set it anyway
Co-developed-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d5c7ce5bf ]
A lot of devices do not include this field, and it's seldom used in force
feedback implementations. I tested about three dozen applications and
none of them make use of the delay.
This fixes initialization of a lot of PID wheels like Cammus, VRS, FFBeast
This change has no effect on fully compliant devices
Co-developed-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8439109b76 ]
Building on the rtnl_has_listeners helper, add the rtnl_notify_needed
helper to check if we can bail out early in the notification routines.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20231208192847.714940-3-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 369609fc62 ("tc: Ensure we have enough buffer space when sending filter netlink notifications")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5e2a97344 ]
As of today, rtnl code creates a new skb and unconditionally fills and
broadcasts it to the relevant group. For most operations this is okay
and doesn't waste resources in general.
When operations are done without the rtnl_lock, as in tc-flower, such
skb allocation, message fill and no-op broadcasting can happen in all
cores of the system, which contributes to system pressure and wastes
precious cpu cycles when no one will receive the built message.
Introduce this helper so rtnetlink operations can simply check if someone
is listening and then proceed if necessary.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20231208192847.714940-2-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 369609fc62 ("tc: Ensure we have enough buffer space when sending filter netlink notifications")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1bd13edbbe ]
Add poll syscall support on the `hist` file. The Waiter will be waken
up when the histogram is updated with POLLIN.
Currently, there is no way to wait for a specific event in userspace.
So user needs to peek the `trace` periodicaly, or wait on `trace_pipe`.
But it is not a good idea to peek at the `trace` for an event that
randomly happens. And `trace_pipe` is not coming back until a page is
filled with events.
This allows a user to wait for a specific event on the `hist` file. User
can set a histogram trigger on the event which they want to monitor
and poll() on its `hist` file. Since this poll() returns POLLIN, the next
poll() will return soon unless a read() happens on that hist file.
NOTE: To read the hist file again, you must set the file offset to 0,
but just for monitoring the event, you may not need to read the
histogram.
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/173527247756.464571.14236296701625509931.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: 0b4ffbe488 ("tracing: Correct the refcount if the hist/hist_debug file fails to open")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d23569979c ]
A trace instance may only need to enable specific events. As the eventfs
directory of an instance currently creates all events which adds overhead,
allow internal instances to be created with just the events in systems
that they care about. This currently only deals with systems and not
individual events, but this should bring down the overhead of creating
instances for specific use cases quite bit.
The trace_array_get_by_name() now has another parameter "systems". This
parameter is a const string pointer of a comma/space separated list of
event systems that should be created by the trace_array. (Note if the
trace_array already exists, this parameter is ignored).
The list of systems is saved and if a module is loaded, its events will
not be added unless the system for those events also match the systems
string.
Link: https://lore.kernel.org/linux-trace-kernel/20231213093701.03fddec0@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Arun Easi <aeasi@marvell.com>
Cc: Daniel Wagner <dwagner@suse.de>
Tested-by: Dmytro Maluka <dmaluka@chromium.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: 0b4ffbe488 ("tracing: Correct the refcount if the hist/hist_debug file fails to open")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6309a5c43b ]
Thanks to CONFIG_DEBUG_SECTION_MISMATCH, empty functions can be
generated out of line. rcu_irq_work_resched() can be called from
noinstr code, so make sure it's always inlined.
Fixes: 564506495c ("rcu/context-tracking: Move deferred nocb resched to context tracking")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/e84f15f013c07e4c410d972e75620c53b62c1b3e.1743481539.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/d1eca076-fdde-484a-b33e-70e0d167c36d@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ac50f7311 ]
Thanks to CONFIG_DEBUG_SECTION_MISMATCH, empty functions can be
generated out of line. These can be called from noinstr code, so make
sure they're always inlined.
Fixes the following warnings:
vmlinux.o: warning: objtool: irqentry_nmi_enter+0xa2: call to ct_nmi_enter() leaves .noinstr.text section
vmlinux.o: warning: objtool: irqentry_nmi_exit+0x16: call to ct_nmi_exit() leaves .noinstr.text section
vmlinux.o: warning: objtool: irqentry_exit+0x78: call to ct_irq_exit() leaves .noinstr.text section
Fixes: 6f0e6c1598 ("context_tracking: Take IRQ eqs entrypoints over RCU")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/8509bce3f536bcd4ae7af3a2cf6930d48c5e631a.1743481539.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/d1eca076-fdde-484a-b33e-70e0d167c36d@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09f37f2d7b ]
sched_smt_active() can be called from noinstr code, so it should always
be inlined. The CONFIG_SCHED_SMT version already has __always_inline.
Do the same for its !CONFIG_SCHED_SMT counterpart.
Fixes the following warning:
vmlinux.o: error: objtool: intel_idle_ibrs+0x13: call to sched_smt_active() leaves .noinstr.text section
Fixes: 321a874a7e ("sched/smt: Expose sched_smt_present static key")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/1d03907b0a247cf7fb5c1d518de378864f603060.1743481539.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/r/202503311434.lyw2Tveh-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ff6039ffb ]
As recommended by section 4.3.7 ("Synchronization when using system
instructions to progrom the trace unit") of ARM IHI 0064H.b, the
self-hosted trace analyzer must perform a Context synchronization
event between writing to the TRCPRGCTLR and reading the TRCSTATR.
Additionally, add an ISB between the each read of TRCSTATR on
coresight_timeout() when using system instructions to program the
trace unit.
Fixes: 1ab3bb9df5 ("coresight: etm4x: Add necessary synchronization for sysreg access")
Signed-off-by: Yuanfang Zhang <quic_yuanfang@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250116-etm_sync-v4-1-39f2b05e9514@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc84bc2aba ]
If track_pfn_copy() fails, we already added the dst VMA to the maple
tree. As fork() fails, we'll cleanup the maple tree, and stumble over
the dst VMA for which we neither performed any reservation nor copied
any page tables.
Consequently untrack_pfn() will see VM_PAT and try obtaining the
PAT information from the page table -- which fails because the page
table was not copied.
The easiest fix would be to simply clear the VM_PAT flag of the dst VMA
if track_pfn_copy() fails. However, the whole thing is about "simply"
clearing the VM_PAT flag is shaky as well: if we passed track_pfn_copy()
and performed a reservation, but copying the page tables fails, we'll
simply clear the VM_PAT flag, not properly undoing the reservation ...
which is also wrong.
So let's fix it properly: set the VM_PAT flag only if the reservation
succeeded (leaving it clear initially), and undo the reservation if
anything goes wrong while copying the page tables: clearing the VM_PAT
flag after undoing the reservation.
Note that any copied page table entries will get zapped when the VMA will
get removed later, after copy_page_range() succeeded; as VM_PAT is not set
then, we won't try cleaning VM_PAT up once more and untrack_pfn() will be
happy. Note that leaving these page tables in place without a reservation
is not a problem, as we are aborting fork(); this process will never run.
A reproducer can trigger this usually at the first try:
https://gitlab.com/davidhildenbrand/scratchspace/-/raw/main/reproducers/pat_fork.c
WARNING: CPU: 26 PID: 11650 at arch/x86/mm/pat/memtype.c:983 get_pat_info+0xf6/0x110
Modules linked in: ...
CPU: 26 UID: 0 PID: 11650 Comm: repro3 Not tainted 6.12.0-rc5+ #92
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:get_pat_info+0xf6/0x110
...
Call Trace:
<TASK>
...
untrack_pfn+0x52/0x110
unmap_single_vma+0xa6/0xe0
unmap_vmas+0x105/0x1f0
exit_mmap+0xf6/0x460
__mmput+0x4b/0x120
copy_process+0x1bf6/0x2aa0
kernel_clone+0xab/0x440
__do_sys_clone+0x66/0x90
do_syscall_64+0x95/0x180
Likely this case was missed in:
d155df53f3 ("x86/mm/pat: clear VM_PAT if copy_p4d_range failed")
... and instead of undoing the reservation we simply cleared the VM_PAT flag.
Keep the documentation of these functions in include/linux/pgtable.h,
one place is more than sufficient -- we should clean that up for the other
functions like track_pfn_remap/untrack_pfn separately.
Fixes: d155df53f3 ("x86/mm/pat: clear VM_PAT if copy_p4d_range failed")
Fixes: 2ab640379a ("x86: PAT: hooks in generic vm code to help archs to track pfnmap regions - v3")
Reported-by: xingwei lee <xrivendell7@gmail.com>
Reported-by: yuxin wang <wang1315768607@163.com>
Reported-by: Marius Fleischer <fleischermarius@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20250321112323.153741-1-david@redhat.com
Closes: https://lore.kernel.org/lkml/CABOYnLx_dnqzpCW99G81DmOr+2UzdmZMk=T3uxwNxwz+R1RAwg@mail.gmail.com/
Closes: https://lore.kernel.org/lkml/CAJg=8jwijTP5fre8woS4JVJQ8iUA6v+iNcsOgtj9Zfpc3obDOQ@mail.gmail.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
