Disable shellcheck rules SC2317 and SC2119. These rules are being
triggered due to false positives. For SC2317, many `return
"${KSFT_PASS}"` lines are reported as unreachable, even though they are
executed during normal runs. For SC2119, the fact that
log_guest/log_host accept either stdin or arguments triggers SC2119,
despite being valid.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-12-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add vsock_loopback module loading to the loopback test so that vmtest.sh
can be used for kernels built with loopback as a module.
This is not technically a fix as kselftest expects loopback to be
built-in already (defined in selftests/vsock/config). This is useful
only for using vmtest.sh outside of kselftest.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-11-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Testing with 1.37 shows all tests passing but emits the warning:
warning: vng version 'virtme-ng 1.37' has not been tested and may not function properly.
The following versions have been tested: 1.33 1.36
This patch adds 1.37 to the virtme-ng versions to get rid of the above
warning.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-10-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the definition for BUILD and initialize it to zero. This avoids
'bash -u vmtest.sh` from throwing 'unbound variable' when BUILD is not
set to 1 and is later checked for its value.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-9-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for future patches that introduce tests that cannot
re-use the same VM, add functions to identify those that *can* re-use a
VM.
By continuing to re-use the same VM for these tests we can save time by
avoiding the delay of booting a VM for every test.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-8-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add check_result() function to reuse logic for incrementing the
pass/fail counters. This function will get used by different callers as
we add different types of tests in future patches (namely, namespace and
non-namespace tests will be called at different places, and re-use this
function).
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-7-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reduce the time waiting for the QEMU pidfile from three minutes to five
seconds. The three minute time window was chosen to make sure QEMU had
enough time to fully boot up. This, however, is an unreasonably long
delay for QEMU to write the pidfile, which happens earlier when the QEMU
process starts (not after VM boot). The three minute delay becomes
noticeably wasteful in future tests that expect QEMU to fail and wait a
full three minutes for a pidfile that will never exist.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-6-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If QEMU fails to boot, then set the returncode (via timeout) instead of
unconditionally dying. This is in preparation for tests that expect QEMU
to fail to boot. In that case, we just want to know if the boot failed
or not so we can test the pass/fail criteria, and continue executing the
next test.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-5-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change QEMU to use generated pidfile names instead of just a single
globally-defined pidfile. This allows multiple QEMU instances to
co-exist with different pidfiles. This is required for future tests that
use multiple VMs to check for CID collissions.
Additionally, this also places the burden of killing the QEMU process
and cleaning up the pidfile on the caller of vm_start(). To help with
this, a function terminate_pidfiles() is introduced that callers use to
perform the cleanup. The terminate_pidfiles() function supports multiple
pidfile removals because future patches will need to process two
pidfiles at a time.
Change QEMU_OPTS to be initialized inside the vm_start(). This allows
the generated pidfile to be passed to the string assignment, and
prepares for future vm-specific options as well (e.g., cid).
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-4-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add wrapper functions vm_vsock_test() and host_vsock_test() to invoke
the vsock_test binary. This encapsulates several items of repeat logic,
such as waiting for the server to reach listening state and
enabling/disabling the bash option pipefail to avoid pipe-style logging
from hiding failures.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-3-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rewrite wait_for_listener()'s pattern matching to avoid tripping the
if-condition when pipefail is on.
awk doesn't gracefully handle SIGPIPE with a non-zero exit code, so grep
exiting upon finding a match causes false-positives when the pipefail
option is used (grep exits, SIGPIPE emits, and awk complains with a
non-zero exit code). Instead, move all of the pattern matching into awk
so that SIGPIPE cannot happen and the correct exit code is returned.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-2-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Improve usability of logging functions. Remove the test name prefix from
logging functions so that logging calls can be made deeper into the call
stack without passing down the test name or setting some global. Teach
log function to accept a LOG_PREFIX variable to avoid unnecessary
argument shifting.
Remove log_setup() and instead use log_host(). The host/guest prefixes
are useful to show whether a failure happened on the guest or host side,
but "setup" doesn't really give additional useful information. Since all
log_setup() calls happen on the host, lets just use log_host() instead.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-1-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This tests introduces a tiny smc_hs_ctrl for filtering SMC connections
based on IP pairs, and also adds a realistic topology model to verify it.
Also, we can only use SMC loopback under CI test, so an additional
configuration needs to be enabled.
Follow the steps below to run this test.
make -C tools/testing/selftests/bpf
cd tools/testing/selftests/bpf
sudo ./test_progs -t smc
Results shows:
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Tested-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://patch.msgid.link/20251107035632.115950-4-alibuda@linux.alibaba.com
Add a test to verify that skb metadata remains accessible after calling
bpf_skb_change_proto(), which modifies packet headroom to accommodate
different IP header sizes.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-16-5ceb08a9b37b@cloudflare.com
Add a test to verify that skb metadata remains accessible after calling
bpf_skb_change_head() and bpf_skb_change_tail(), which modify packet
headroom/tailroom and can trigger head reallocation.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-15-5ceb08a9b37b@cloudflare.com
Add a test to verify that skb metadata remains accessible after calling
bpf_skb_adjust_room(), which modifies the packet headroom and can trigger
head reallocation.
The helper expects an Ethernet frame carrying an IP packet so switch test
packet identification by source MAC address since we can no longer rely on
Ethernet proto being set to zero.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-14-5ceb08a9b37b@cloudflare.com
Add a test to verify that skb metadata remains accessible after calling
bpf_skb_vlan_push() and bpf_skb_vlan_pop(), which modify the packet
headroom.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-13-5ceb08a9b37b@cloudflare.com
Since pskb_expand_head() no longer clears metadata on unclone, update tests
for cloned packets to expect metadata to remain intact.
Also simplify the clone_dynptr_kept_on_{data,meta}_slice_write tests.
Creating an r/w dynptr slice is sufficient to trigger an unclone in the
prologue, so remove the extraneous writes to the data/meta slice.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-12-5ceb08a9b37b@cloudflare.com
Add diagnostic output when metadata verification fails to help with
troubleshooting test failures. Introduce a check_metadata() helper that
prints both expected and received metadata to the BPF program's stderr
stream on mismatch. The userspace test reads and dumps this stream on
failure.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-11-5ceb08a9b37b@cloudflare.com
Move metadata verification into the BPF TC programs. Previously,
userspace read metadata from a map and verified it once at test end.
Now TC programs compare metadata directly using __builtin_memcmp() and
set a test_pass flag. This enables verification at multiple points during
test execution rather than a single final check.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-10-5ceb08a9b37b@cloudflare.com
This script sets net.ipv4.tcp_rto_max_ms to 1000 and checks
if SYN+ACK RTO is capped at 1s for TFO and non-TFO.
Without the previous patch, the max RTO is applied to TFO
SYN+ACK only, and non-TFO SYN+ACK RTO increases exponentially.
# selftests: net/packetdrill: tcp_rto_synack_rto_max.pkt
# TAP version 13
# 1..2
# tcp_rto_synack_rto_max.pkt:46: error handling packet: timing error:
expected outbound packet at 5.091936 sec but happened at 6.107826 sec; tolerance 0.127974 sec
# script packet: 5.091936 S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK>
# actual packet: 6.107826 S. 0:0(0) ack 1 win 65535 <mss 1460,nop,nop,sackOK>
# not ok 1 ipv4
# tcp_rto_synack_rto_max.pkt:46: error handling packet: timing error:
expected outbound packet at 5.075901 sec but happened at 6.091841 sec; tolerance 0.127976 sec
# script packet: 5.075901 S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK>
# actual packet: 6.091841 S. 0:0(0) ack 1 win 65535 <mss 1460,nop,nop,sackOK>
# not ok 2 ipv6
# # Totals: pass:0 fail:2 xfail:0 xpass:0 skip:0 error:0
not ok 49 selftests: net/packetdrill: tcp_rto_synack_rto_max.pkt # exit=1
With the previous patch, all SYN+ACKs are retransmitted
after 1s.
# selftests: net/packetdrill: tcp_rto_synack_rto_max.pkt
# TAP version 13
# 1..2
# ok 1 ipv4
# ok 2 ipv6
# # Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
ok 49 selftests: net/packetdrill: tcp_rto_synack_rto_max.pkt
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251106003357.273403-7-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.18-rc5).
Conflicts:
drivers/net/wireless/ath/ath12k/mac.c
9222582ec5 ("Revert "wifi: ath12k: Fix missing station power save configuration"")
6917e268c4 ("wifi: ath12k: Defer vdev bring-up until CSA finalize to avoid stale beacon")
https://lore.kernel.org/11cece9f7e36c12efd732baa5718239b1bf8c950.camel@sipsolutions.net
Adjacent changes:
drivers/net/ethernet/intel/Kconfig
b1d16f7c00 ("libie: depend on DEBUG_FS when building LIBIE_FWLOG")
93f53db9f9 ("ice: switch to Page Pool")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - new code bugs:
- ptp: expose raw cycles only for clocks with free-running counter
- bonding: fix null-deref in actor_port_prio setting
- mdio: ERR_PTR-check regmap pointer returned by device_node_to_regmap()
- eth: libie: depend on DEBUG_FS when building LIBIE_FWLOG
Previous releases - regressions:
- virtio_net: fix perf regression due to bad alignment of
virtio_net_hdr_v1_hash
- Revert "wifi: ath10k: avoid unnecessary wait for service ready message"
caused regressions for QCA988x and QCA9984
- Revert "wifi: ath12k: Fix missing station power save configuration"
caused regressions for WCN7850
- eth: bnxt_en: shutdown FW DMA in bnxt_shutdown(), fix memory
corruptions after kexec
Previous releases - always broken:
- virtio-net: fix received packet length check for big packets
- sctp: fix races in socket diag handling
- wifi: add an hrtimer-based delayed work item to avoid low granularity
of timers set relatively far in the future, and use it where it matters
(e.g. when performing AP-scheduled channel switch)
- eth: mlx5e:
- correctly propagate error in case of module EEPROM read failure
- fix HW-GRO on systems with PAGE_SIZE == 64kB
- dsa: b53: fixes for tagging, link configuration / RMII, FDB, multicast
- phy: lan8842: implement latest errata
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmkMyx0ACgkQMUZtbf5S
Irs4gA//fRGPHfEksbVO0lAR9QVUKq/Wvokt6DnLXQsi7js7kun7ymVFyU8tVacP
sGoYbTTXO34XpijKVMTFe5WnnnSF3cri1/e+PYNXndKGHOheLvz0aq+CniiLexaT
ag/opHX9+Io6x8DyOVkkRJYByvEcXgy1vFjhk5O04wn7tGPBNzvaKQJzjfVIiiWP
thma/e77jVUqsNptS/VzJNCDwPB3Qi0fqylRovu7A59Kmr7GLZxaqZQpvM5/XjU3
s3NhNjNDawmiwxN2AIztXo+vMReqFaiCr+z36OcruE04CFslkQGmE/5g3FdDGg+Q
RE7Wfgk2UJ+Q5Y1jnQWNYOkGaMd6bMgPQD/8zZvwEf163Gh1YBh0rtDY07DWV5FR
wp5cmeNDo2Mf+nnCM2UaoUQS2AAmkub2aAIjnlvrefeJMKciyMqtQe+V02aIxuvK
BPmeSCN1IOyAIDCRE3Fd6JFyk+4Z4YC6Hdm/WOG517eGrDh3yV9JE/+C3jdh3JwT
lvaScKhCdyq/9mFqEcU/yR5Kc4Od6Rw0K0s5DM4LAbKSsxI6hp6SkuoFHUsqFsRR
HL3ucy4c4hmLxz6AA5/+UVIPzFsY5cwOnhs3AU2UVuA95fH0QWqX2u2ll0rC9mAW
xDXa/ai0/KAGvVYqjC+MDyF8zrtzSG7C40ZsxhdcU84s94ZNVFI=
=a/Ml
-----END PGP SIGNATURE-----
Merge tag 'net-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
Including fixes from bluetooth and wireless.
Current release - new code bugs:
- ptp: expose raw cycles only for clocks with free-running counter
- bonding: fix null-deref in actor_port_prio setting
- mdio: ERR_PTR-check regmap pointer returned by
device_node_to_regmap()
- eth: libie: depend on DEBUG_FS when building LIBIE_FWLOG
Previous releases - regressions:
- virtio_net: fix perf regression due to bad alignment of
virtio_net_hdr_v1_hash
- Revert "wifi: ath10k: avoid unnecessary wait for service ready
message" caused regressions for QCA988x and QCA9984
- Revert "wifi: ath12k: Fix missing station power save configuration"
caused regressions for WCN7850
- eth: bnxt_en: shutdown FW DMA in bnxt_shutdown(), fix memory
corruptions after kexec
Previous releases - always broken:
- virtio-net: fix received packet length check for big packets
- sctp: fix races in socket diag handling
- wifi: add an hrtimer-based delayed work item to avoid low
granularity of timers set relatively far in the future, and use it
where it matters (e.g. when performing AP-scheduled channel switch)
- eth: mlx5e:
- correctly propagate error in case of module EEPROM read failure
- fix HW-GRO on systems with PAGE_SIZE == 64kB
- dsa: b53: fixes for tagging, link configuration / RMII, FDB,
multicast
- phy: lan8842: implement latest errata"
* tag 'net-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
selftests/vsock: avoid false-positives when checking dmesg
net: bridge: fix MST static key usage
net: bridge: fix use-after-free due to MST port state bypass
lan966x: Fix sleeping in atomic context
bonding: fix NULL pointer dereference in actor_port_prio setting
net: dsa: microchip: Fix reserved multicast address table programming
net: wan: framer: pef2256: Switch to devm_mfd_add_devices()
net: libwx: fix device bus LAN ID
net/mlx5e: SHAMPO, Fix header formulas for higher MTUs and 64K pages
net/mlx5e: SHAMPO, Fix skb size check for 64K pages
net/mlx5e: SHAMPO, Fix header mapping for 64K pages
net: ti: icssg-prueth: Fix fdb hash size configuration
net/mlx5e: Fix return value in case of module EEPROM read error
net: gro_cells: Reduce lock scope in gro_cell_poll
libie: depend on DEBUG_FS when building LIBIE_FWLOG
wifi: mac80211_hwsim: Limit destroy_on_close radio removal to netgroup
netpoll: Fix deadlock in memory allocation under spinlock
net: ethernet: ti: netcp: Standardize knav_dma_open_channel to return NULL on error
virtio-net: fix received length check in big packets
bnxt_en: Fix warning in bnxt_dl_reload_down()
...
Sometimes VMs will have some intermittent dmesg warnings that are
unrelated to vsock. Change the dmesg parsing to filter on strings
containing 'vsock' to avoid false positive failures that are unrelated
to vsock. The downside is that it is possible for some vsock related
warnings to not contain the substring 'vsock', so those will be missed.
Fixes: a4a65c6fe0 ("selftests/vsock: add initial vmtest.sh for vsock")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251105-vsock-vmtest-dmesg-fix-v2-1-1a042a14892c@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update all struct proto_ops connect() callback function prototypes from
"struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the
compiler about object sizes. Calls into struct proto handlers gain casts
that will be removed in the struct proto conversion patch.
No binary changes expected.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-3-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update all struct proto_ops bind() callback function prototypes from
"struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the
compiler about object sizes. Calls into struct proto handlers gain casts
that will be removed in the struct proto conversion patch.
No binary changes expected.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-2-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By design, an MPTCP connection will not accept extra subflows where no
MPTCP listening sockets can accept such requests.
In other words, it means that if the 'server' listens on a specific
address / device, it cannot accept MP_JOIN sent to a different address /
device. Except if there is another MPTCP listening socket accepting
them.
This is what the new tests are validating:
- Forcing a bind on the main v4/v6 address, and checking that MP_JOIN
to announced addresses are not accepted.
- Also forcing a bind on the main v4/v6 address, but before, another
listening socket is created to accept additional subflows. Note that
'mptcpize run nc -l' -- or something else only doing: socket(MPTCP),
bind(<IP>), listen(0) -- would be enough, but here mptcp_connect is
reused not to depend on another tool just for that.
- Same as the previous one, but using v6 link-local addresses: this is
a bit particular because it is required to specify the outgoing
network interface when connecting to a link-local address announced
by the other peer. When using the routing rules, this doesn't work
(the outgoing interface is not known) ; but it does work with a
'laminar' endpoint having a specified interface.
Note that extra small modifications are needed for these tests to work:
- mptcp_connect's check_getpeername_connect() check should strip the
specified interface when comparing addresses.
- With IPv6 link-local addresses, it is required to wait for them to
be ready (no longer in 'tentative' mode) before using them, otherwise
the bind() will not be allowed.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/591
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251101-net-next-mptcp-fm-endp-nb-bind-v1-4-b4166772d6bb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The same extra long commands are present twice, with small differences:
the variable for the stdin file is different.
Use new dedicated variables in one command to avoid this code
duplication.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251101-net-next-mptcp-fm-endp-nb-bind-v1-3-b4166772d6bb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Our documentation is saying that the in-kernel PM is only using fullmesh
endpoints to establish subflows to announced addresses when at least one
endpoint has a fullmesh flag. But this was not totally correct: only
fullmesh endpoints were used if at least one endpoint *from the same
address family as the received ADD_ADDR* has the fullmesh flag.
This is confusing, and it seems clearer not to have differences
depending on the address family.
So, now, when at least one MPTCP endpoint has a fullmesh flag, the local
addresses are picked from all fullmesh endpoints, which might be 0 if
there are no endpoints for the correct address family.
One selftest needs to be adapted for this behaviour change.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251101-net-next-mptcp-fm-endp-nb-bind-v1-2-b4166772d6bb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add testcase to run busy poll test with threaded napi busy poll enabled.
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Martin Karsten <mkarsten@uwaterloo.ca>
Tested-by: Martin Karsten <mkarsten@uwaterloo.ca>
Link: https://patch.msgid.link/20251028203007.575686-3-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The script "ethtool-common.sh" is not installed in INSTALL_PATH, and
triggers some errors when I try to run the test
'drivers/net/netdevsim/ethtool-coalesce.sh':
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# ./ethtool-coalesce.sh: line 4: ethtool-common.sh: No such file or directory
# ./ethtool-coalesce.sh: line 25: make_netdev: command not found
# ethtool: bad command line argument(s)
# ./ethtool-coalesce.sh: line 124: check: command not found
# ./ethtool-coalesce.sh: line 126: [: -eq: unary operator expected
# FAILED /0 checks
not ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh # exit=1
Install this file to avoid this error. After this patch:
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# PASSED all 22 checks
ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh
Fixes: fbb8531e58 ("selftests: extract common functions in ethtool-common.sh")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Link: https://patch.msgid.link/20251030040340.3258110-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The GRO self-test, gro.c, currently constructs IPv6 packets containing a
Hop-by-Hop Options header (IPPROTO_HOPOPTS) to ensure the GRO path
correctly handles IPv6 extension headers.
However, network elements may be configured to drop packets with the
Hop-by-Hop Options header (HBH). This causes the self-test to fail
in environments where such network elements are present.
To improve the robustness and reliability of this test in diverse
network environments, switch from using IPPROTO_HOPOPTS to
IPPROTO_DSTOPTS (Destination Options).
The Destination Options header is less likely to be dropped by
intermediate routers and still serves the core purpose of the test:
validating GRO's handling of an IPv6 extension header. This change
ensures the test can execute successfully without being incorrectly
failed by network policies outside the kernel's control.
Fixes: 7d1575014a ("selftests/net: GRO coalesce test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Anubhav Singh <anubhavsinggh@google.com>
Link: https://patch.msgid.link/20251030060436.1556664-1-anubhavsinggh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Due to the gro_sender sending data packets and FIN packets
in very quick succession, these are received almost simultaneously
by the gro_receiver. FIN packets are sometimes processed before the
data packets leading to intermittent (~1/100) test failures.
This change adds a delay of 100ms before sending FIN packets
in gro:tcp test to avoid the out-of-order delivery. The same
mitigation already exists for the gro:ip test.
Fixes: 7d1575014a ("selftests/net: GRO coalesce test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Anubhav Singh <anubhavsinggh@google.com>
Link: https://patch.msgid.link/20251030062818.1562228-1-anubhavsinggh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix overflows in vfio type1 backend for mappings at the end of the
64-bit address space, resulting in leaked pinned memory. New
selftest support included to avoid such issues in the future.
(Alex Mastro)
-----BEGIN PGP SIGNATURE-----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=sfMw
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.18-rc4' of https://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
- Fix overflows in vfio type1 backend for mappings at the end of the
64-bit address space, resulting in leaked pinned memory.
New selftest support included to avoid such issues in the future
(Alex Mastro)
* tag 'vfio-v6.18-rc4' of https://github.com/awilliam/linux-vfio:
vfio: selftests: add end of address space DMA map/unmap tests
vfio: selftests: update DMA map/unmap helpers to support more test kinds
vfio/type1: handle DMA map/unmap up to the addressable limit
vfio/type1: move iova increment to unmap_unpin_*() caller
vfio/type1: sanitize for overflow using check_*_overflow()
Fixes build warning in cachestat found during clang build and adds
tmpshmcstat to .gitignore.
-----BEGIN PGP SIGNATURE-----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=XQbQ
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fix build warning in cachestat found during clang build and add
tmpshmcstat to .gitignore"
* tag 'linux_kselftest-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: cachestat: Fix warning on declaration under label
selftests/cachestat: add tmpshmcstat file to .gitignore
We are trying to move away from netdevsim-only tests and towards
tests which can be run both against netdevsim and real drivers.
Replace the simple bash script we have for checking ethtool -g/-G
on netdevsim with a Python test tweaking those params as well
as channel count.
The new test is not exactly equivalent to the netdevsim one,
but real drivers don't often support random ring sizes,
let alone modifying max values via debugfs.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251029164930.2923448-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test that ICMP extensions are reported correctly when enabled and not
reported when disabled. Test both IPv4 and IPv6 and using different
packet sizes, to make sure trimming / padding works correctly.
Disable ICMP rate limiting (defaults to 1 per-second per-target) so that
the kernel will always generate ICMP errors when needed.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251027082232.232571-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In bareudp.sh, this script uses /bin/sh and it will load another lib.sh
BASH script at the very beginning.
But on some operating systems like Ubuntu, /bin/sh is actually pointed to
DASH, thus it will try to run BASH commands with DASH and consequently
leads to syntax issues:
# ./bareudp.sh: 4: ./lib.sh: Bad substitution
# ./bareudp.sh: 5: ./lib.sh: source: not found
# ./bareudp.sh: 24: ./lib.sh: Syntax error: "(" unexpected
Fix this by explicitly using BASH for bareudp.sh. This fixes test
execution failures on systems where /bin/sh is not BASH.
Reported-by: Edoardo Canepa <edoardo.canepa@canonical.com>
Link: https://bugs.launchpad.net/bugs/2129812
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20251027095710.2036108-2-po-hsu.lin@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Socket APIs like recvfrom(), accept(), and getsockname() expect socklen_t*
arg, but tests were using int variables. This causes -Wpointer-sign
warnings on platforms where socklen_t is unsigned.
Change the variable type from int to socklen_t to resolve the warning and
ensure type safety across platforms.
warning fixed:
sctp_collision.c:62:70: warning: passing 'int *' to parameter of
type 'socklen_t *' (aka 'unsigned int *') converts between pointers to
integer types with different sign [-Wpointer-sign]
62 | ret = recvfrom(sd, buf, sizeof(buf),
0, (struct sockaddr *)&daddr, &len);
| ^~~~
/usr/include/sys/socket.h:165:27: note: passing argument to
parameter '__addr_len' here
165 | socklen_t *__restrict __addr_len);
| ^
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Ankit Khushwaha <ankitkhushwaha.linux@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251028172947.53153-1-ankitkhushwaha.linux@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests which validate dma map/unmap at the end of address space. Add
negative test cases for checking that overflowing ioctl args fail with
the expected errno.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Alex Mastro <amastro@fb.com>
Link: https://lore.kernel.org/r/20251028-fix-unmap-v6-5-2542b96bcc8e@fb.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Add __vfio_pci_dma_*() helpers which return -errno from the underlying
ioctls.
Add __vfio_pci_dma_unmap_all() to test more unmapping code paths. Add an
out unmapped arg to report the unmapped byte size.
The existing vfio_pci_dma_*() functions, which are intended for
happy-path usage (assert on failure) are now thin wrappers on top of the
double-underscore helpers.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Alex Mastro <amastro@fb.com>
Link: https://lore.kernel.org/r/20251028-fix-unmap-v6-4-2542b96bcc8e@fb.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Test that outgoing plaintext records respect the tls TLS_TX_MAX_PAYLOAD_LEN
set using setsockopt(). The limit is set to be 128, thus, in all received
records, the plaintext must not exceed this amount.
Also test that setting a new record size limit whilst a pending open
record exists is handled correctly by discarding the request.
Suggested-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20251022001937.20155-2-wilfred.opensource@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix to avoid the usage of the `ret` variable uninitialized in the
following macro expansions.
It solves the following warning:
In file included from netlink-dumps.c:21:
netlink-dumps.c: In function ‘dump_extack’:
../kselftest_harness.h:788:35: warning: ‘ret’ may be used uninitialized [-Wmaybe-uninitialized]
788 | intmax_t __exp_print = (intmax_t)__exp; \
| ^~~~~~~~~~~
../kselftest_harness.h:631:9: note: in expansion of macro ‘__EXPECT’
631 | __EXPECT(expected, #expected, seen, #seen, ==, 0)
| ^~~~~~~~
netlink-dumps.c:169:9: note: in expansion of macro ‘EXPECT_EQ’
169 | EXPECT_EQ(ret, FOUND_EXTACK);
| ^~~~~~~~~
The issue can be reproduced, building the tests, with the command:
make -C tools/testing/selftests TARGETS=net
Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com>
Link: https://patch.msgid.link/20251023205354.28249-1-alessandro.zanni87@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
really started testing.
Current release - new code bugs:
- eth: mlx5e:
- psp: avoid 'accel' NULL pointer dereference
- skip PPHCR register query for FEC histogram if not supported
Previous releases - regressions:
- bonding: update the slave array for broadcast mode
- rtnetlink: re-allow deleting FDB entries in user namespace
- eth: dpaa2: fix the pointer passed to PTR_ALIGN on Tx path
Previous releases - always broken:
- can: drop skb on xmit if device is in listen-only mode
- gro: clear skb_shinfo(skb)->hwtstamps in napi_reuse_skb()
- eth: mlx5e
- RX, fix generating skb from non-linear xdp_buff if program
trims frags
- make devcom init failures non-fatal, fix races with IPSec
Misc:
- some documentation formatting "fixes"
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=rD+V
-----END PGP SIGNATURE-----
Merge tag 'net-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can. Slim pickings, I'm guessing people haven't
really started testing.
Current release - new code bugs:
- eth: mlx5e:
- psp: avoid 'accel' NULL pointer dereference
- skip PPHCR register query for FEC histogram if not supported
Previous releases - regressions:
- bonding: update the slave array for broadcast mode
- rtnetlink: re-allow deleting FDB entries in user namespace
- eth: dpaa2: fix the pointer passed to PTR_ALIGN on Tx path
Previous releases - always broken:
- can: drop skb on xmit if device is in listen-only mode
- gro: clear skb_shinfo(skb)->hwtstamps in napi_reuse_skb()
- eth: mlx5e
- RX, fix generating skb from non-linear xdp_buff if program
trims frags
- make devcom init failures non-fatal, fix races with IPSec
Misc:
- some documentation formatting 'fixes'"
* tag 'net-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net/mlx5: Fix IPsec cleanup over MPV device
net/mlx5: Refactor devcom to return NULL on failure
net/mlx5e: Skip PPHCR register query if not supported by the device
net/mlx5: Add PPHCR to PCAM supported registers mask
virtio-net: zero unused hash fields
net: phy: micrel: always set shared->phydev for LAN8814
vsock: fix lock inversion in vsock_assign_transport()
ovpn: use datagram_poll_queue for socket readiness in TCP
espintcp: use datagram_poll_queue for socket readiness
net: datagram: introduce datagram_poll_queue for custom receive queues
net: bonding: fix possible peer notify event loss or dup issue
net: hsr: prevent creation of HSR device with slaves from another netns
sctp: avoid NULL dereference when chunk data buffer is missing
ptp: ocp: Fix typo using index 1 instead of i in SMA initialization loop
net: ravb: Ensure memory write completes before ringing TX doorbell
net: ravb: Enforce descriptor type ordering
net: hibmcge: select FIXED_PHY
net: dlink: use dev_kfree_skb_any instead of dev_kfree_skb
Documentation: networking: ax25: update the mailing list info.
net: gro_cells: fix lock imbalance in gro_cells_receive()
...
Fix warning caused from declaration under a case label. The proper way
is to declare variable at the beginning of the function. The warning
came from running clang using LLVM=1; and is as follows:
-test_cachestat.c:260:3: warning: label followed by a declaration is a C23 extension [-Wc23-extensions]
260 | char *map = mmap(NULL, filesize, PROT_READ | PROT_WRITE,
|
Link: https://lore.kernel.org/r/20250929115405.25695-2-sidharthseela@gmail.com
Signed-off-by: Sidharth Seela <sidharthseela@gmail.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: wang lian <lianux.mm@gmail.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
