[ Upstream commit 5e031d9fe8 ]
On CI, we need to see if the number of crtcs changes to determine
whether or not we need to upload the mclk table again. In practice
we don't currently upload the mclk table again after the initial load.
The only reason you would would be to add new states, e.g., for
arbitrary mclk setting which is not currently supported.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[ Upstream commit 2d02b8bdba ]
During DRAM initialization on certain ASpeed devices, an incorrect
bit (bit 10) was checked in the "SDRAM Bus Width Status" register
to determine DRAM width.
Query bit 6 instead in accordance with the Aspeed AST2050 datasheet v1.05.
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[ Upstream commit 39d4275058 ]
set_power_state defaults to no displays, so we need to update
the display configuration after setting up the powerstate on the
first call. In most cases this is not an issue since ends up
getting called multiple times at any given modeset and the proper
order is achieved in the display changed handling at the top of
the function.
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Jordan Lazare <Jordan.Lazare@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[ Upstream commit bc3f5d8c4c ]
We need to use post-decrement to get the pci_map_page undone also for
i==0, and to avoid some very unpleasant behaviour if pci_map_page
failed already at i==0.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[ Upstream commit f6ff4f67cd ]
An arbitrary amount of time can pass between spin_unlock and
radeon_fence_wait_any, so we need to ensure that nobody frees the
fences from under us.
Based on the analogous fix for amdgpu.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[ Upstream commit 26f6f2d301 ]
Since sequence block v2 the second byte contains flags other than just
pull up/down. Don't pass arbitrary data to the sideband interface.
The rest may or may not work for sequence block v2, but there should be
no harm done.
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/ebe3c2eee623afc4b3a134533b01f8d591d13f32.1454582914.git.jani.nikula@intel.com
(cherry picked from commit 4e1c63e376)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[ Upstream commit 8bb4da1df5 ]
While auditing various users of the connector/encoder lists I realized
that the atomic code is a very prolific user of them. And it only ever
grabs the mode_config->connection_mutex, but not the
mode_config->mutex like all the other code walking encoder/connector
lists.
The problem is that we can't grab the mode_config.mutex late in atomic
code since that would lead to locking inversions. And we don't want to
grab it unconditionally like the legacy set_config modeset path since
that would render all the fine-grained locking moot.
Instead just grab more locks in the dp mst hotplug code. Note that
drm_connector_init (which is the one adding the connector to these
lists) already uses drm_modeset_lock_all.
The other reason for grabbing all locks is that the dpms off in the
unplug function amounts to a modeset, so better to take all required
locks for that.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[ Upstream commit 2ee6bcdcfa ]
Similar with the i915 take all modeset locks for mst hotplug. This is
needed to make sure radeon holds both mode_config.mutex and
mode_config.connection_mutex when updating the connector_list, which
is the new (interim) locking regime we want for that.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[ Upstream commit df4839fdc9 ]
output ports should always have a connector, unless
in the rare case connector allocation fails in the
driver.
In this case we only need to teardown the pdt,
and free the struct, and there is no need to
send a hotplug msg.
In the case were we add the port to the destroy
list we need to send a hotplug if we destroy
any connectors, so userspace knows to reprobe
stuff.
this patch also handles port->connector allocation
failing which should be a rare event, but makes
the code consistent.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[ Upstream commit 4772ff03df ]
The port is removed synchronously, but the connector delayed.
This causes a use after free which can cause a kernel BUG with
slug_debug=FPZU. This is fixed by freeing the port after the
connector.
This fixes a regression introduced with
6b8eeca65b
"drm/dp/mst: close deadlock in connector destruction."
Cc: stable@vger.kernel.org
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[ Upstream commit a9ebb3e46c ]
Our PBN value overflows the 20 bits integer part of the 20.12
fixed point. We need to use 31.32 fixed point to avoid this.
This happens with display clocks larger than 293122 (at 24 bpp),
which we see with the Sharp (and similar) 4k tiled displays.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[ Upstream commit dabe19540a ]
In drm_dp_mst_allocate_vcpi, it returns true in two paths,
but in one path, there is no reference couting decrease.
Signed-off-by: Insu Yun <wuninsu@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[ Upstream commit a28bbd5824 ]
Write-combining is a CPU feature. From the GPU POV, these both simply
mean no GPU<->CPU cache coherency.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[ Upstream commit 5efd407674 ]
Per DP spec, the source device should fall back to 18 bpp, VESA range
RGB when the sink capability is unknown. Fix the color depth
clamping. 18 bpp color depth should ensure full color range in automatic
mode.
The clamping has been HDMI specific since its introduction in
commit 996a2239f9
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Fri Apr 19 11:24:34 2013 +0200
drm/i915: Disable high-bpc on pre-1.4 EDID screens
Cc: stable@vger.kernel.org
Reported-and-tested-by: Dihan Wickremasuriya <nayomal@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=105331
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452695720-7076-1-git-send-email-jani.nikula@intel.com
(cherry picked from commit 013dd9e038)
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[ Upstream commit a64c9dab1c ]
Move encoding of DFS (digital frequency synthesizer) divider into a
separate function and improve calculation precision.
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[ Upstream commit c9a392eac1 ]
This is preparation for the fixes in the following patches.
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[ Upstream commit 7726e72b3d ]
Need to setup the deep color and avi packets regardless of
audio setup.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[ Upstream commit 06ef83a705 ]
Following a GPU reset, we may leave the context in a poorly defined
state, and reloading from that context will leave the GPU flummoxed. For
secondary contexts, this will lead to that context being banned - but
currently it is also causing the default context to become banned,
leading to turmoil in the shared state.
This is a regression from
commit 6702cf16e0 [v4.1]
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date: Mon Mar 16 16:00:58 2015 +0000
drm/i915: Initialize all contexts
which quietly introduced the removal of the MI_RESTORE_INHIBIT on the
default context.
v2: Mark the global default context as uninitialized on GPU reset so
that the context-local workarounds are reloaded upon re-enabling.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1448630935-27377-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: stable@vger.kernel.org
[danvet: This seems to fix a gpu hand on after the first resume,
resulting in any future suspend operation failing with -EIO because
the gpu seems to be in a funky state. Somehow this patch fixes that.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 42f1cae8c0)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[ Upstream commit 7a11a334aa ]
This is needed to receive correct port
number from RAD, so MSTB could be found
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[ Upstream commit 75af4c8c4c ]
This fix is needed to support more then two
branch displays, so RAD address consist at
least of 2 elements
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[ Upstream commit 1f16ee7fa1 ]
We should always send reply for UP request in order
to make downstream device clean-up resources appropriately.
Issue was that reply for UP request was sent only once.
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[ Upstream commit bd93432087 ]
In case broadcast message received in UP request,
RAD cannot be used to identify message originator.
Message should be parsed, originator should be found
by GUID from parsed message.
Also reply with broadcast in case broadcast message
received (for now it is always broadcast)
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[ Upstream commit 42ef344c09 ]
eoffset is sometimes treated as the last address inside the address
range, and sometimes as the first address outside the range. This
was resulting in errors when a test filled up the entire address
space. Make it consistent to always be the last address within the
range. Also fixed related errors when checking the VA limit and in
radeon_vm_fence_pts.
Signed-off-by: Felix.Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[ Upstream commit be8719a610 ]
The way the mode probing works is this:
1. All modes currently on the mode list are marked as UNVERIFIED
2. New modes are on the probed_modes list (they start with
status OK)
3. Modes are moved from the probed_modes list to the actual
mode list. If a mode already on the mode list is deemed
to match one of the probed modes, the duplicate is dropped
and the mode status updated to OK. After this the
probed_modes list will be empty.
4. All modes on the mode list are verified to not violate any
constraints. Any that do are marked as such.
5. Any mode left with a non-OK status is pruned from the list,
with an appropriate debug message.
What all this means is that any mode on the original list that
didn't have a duplicate on the probed_modes list, should be left
with status UNVERFIED (or previously could have been left with
some other status, but never OK).
I broke that in
commit 05acaec334 ("drm: Reorganize probed mode validation")
by always assigning something to the mode->status during the validation
step. So any mode from the old list that still passed the validation
would be left on the list with status OK in the end.
Fix this by not doing the basic mode validation unless the mode
already has status OK (meaning it came from the probed_modes list,
or at least a duplicate of it was on that list). This way we will
correctly prune away any mode from the old mode list that didn't
appear on the probed_modes list.
Cc: stable@vger.kernel.org
Cc: Adam Jackson <ajax@redhat.com>
Fixes: 05acaec334 ("drm: Reorganize probed mode validation")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449177255-9515-2-git-send-email-ville.syrjala@linux.intel.com
Testcase: igt/kms_force_connector_basic/prune-stale-modes
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93332
[danvet: Also applying to drm-misc to avoid too much conflict hell -
there's a big pile of patches from Ville on top of this one.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[ Upstream commit dbb17a21c1 ]
Need to call this on resume if displays changes during
suspend in order to properly be notified of changes.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
commit 54c12bc374 upstream.
If user space calls unreference on a user_dmabuf it will typically
kill the struct ttm_base_object member which is responsible for the
user-space visibility. However the dmabuf part may still be alive and
refcounted. In some situations, like for shared guest-backed surface
referencing/opening, the driver may try to reference the
struct ttm_base_object member again, causing an immediate kernel warning
and a later kernel NULL pointer dereference.
Fix this by always maintaining a reference on the struct
ttm_base_object member, in situations where it might subsequently be
referenced.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4cee6a9057 upstream.
So that the bl encoder will be null if the GPU does not
control the backlight.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ae93580ee5 upstream.
If driver backlight control is disabled, either by driver
parameter or default per-asic setting, revert to the old behavior.
Fixes a regression in commit:
4281f46ef8
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc917ab435 upstream.
Pinning a userptr onto the hardware raises interesting questions about
the lifetime of such a surface as the framebuffer extends that life
beyond the client's address space. That is the hardware will need to
keep scanning out from the backing storage even after the client wants
to remap its address space. As the hardware pins the backing storage,
the userptr becomes invalid and this raises a WARN when the clients
tries to unmap its address space. The situation can be even more
complicated when the buffer is passed between processes, between a
client and display server, where the lifetime and hardware access is
even more confusing. Deny it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8e7a65aa70 upstream.
We accidentally lost the initial DPLL register write in
1c4e027461 drm/i915: Fix DVO 2x clock enable on 830M
The "three times for luck" hack probably saved us from a total
disaster. But anyway, bring the initial write back so that the
code actually makes some sense.
Reported-and-tested-by: Nick Bowler <nbowler@draconx.ca>
References: http://mid.gmane.org/CAN_QmVyMaArxYgEcVVsGvsMo7-6ohZr8HmF5VhkkL4i9KOmrhw@mail.gmail.com
Cc: Nick Bowler <nbowler@draconx.ca>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40a24488f5 upstream.
In order to flush the results from in-batch pipecontrol writes (used for
example in glQuery) before declaring the batch complete (and so declaring
the query results coherent), we need to set the FlushEnable bit in our
flushing pipecontrol. The FlushEnable bit "waits until all previous
writes of immediate data from post-sync circles are complete before
executing the next command".
I get GPU hangs on byt without flushing these writes (running ue4).
piglit has examples where the flush is required for correct rendering.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a7d44f47f upstream.
PWM fan control is only available with DPM. If DPM disabled,
don't expose the PWM fan controls to avoid a crash.
Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=92524
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a6c521bb4 upstream.
On nv50+, we restrict the valid domains to just the one where the buffer
was originally created. However after the buffer is evicted to system
memory, we might move it back to a different domain that was not
originally valid. When sharing the buffer and retrieving its GEM_INFO
data, we still want the domain that will be valid for this buffer in a
pushbuf, not the one where it currently happens to be.
This resolves fdo#92504 and several others. These are due to suspend
evicting all buffers, making it more likely that they temporarily end up
in the wrong place.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92504
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 30730c7f59 upstream.
In Linux 4.3-rc5, there is an error case in drm_dp_get_branch_device
that returns without releasing mgr->lock, resulting a spew of kernel
messages about a kernel work function possibly having leaked a mutex
and presumably more serious adverse consequences later. This patch
changes the error to "goto out" to unlock the mutex before returning.
[airlied: grabbed from drm-next as it fixes something we've seen]
Signed-off-by: Adam J. Richter <adam_richter2004@yahoo.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51a4726b04 upstream.
They were added relatively early in the driver init process
which meant that in some cases the driver was not finished
initializing before external tools tried to use them which
could result in a crash depending on the timing.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bc8c131ccd upstream.
This allows tiled monitors to work with radeon once mst is enabled.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ae491542cb upstream.
This zeroes the msg so no random stack data ends up getting
sent, it also limits the function to not accepting > 4
i2c msgs.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f231976c2e upstream.
We need to do this in order to prevent accesses to the device while it's
powered down. Userspace may have an mmap of the fb, and there's no good
way (that I know of) to prevent it from touching the device otherwise.
This fixes some nasty races between runpm and plymouth on some systems,
which result in the GPU getting very upset and hanging the boot.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 621bd0f698 upstream.
With atomic drivers we need to make sure that (at least in general)
property reads hold the right locks. But the legacy dpms property is
special and can be read locklessly. Since userspace loves to just
randomly look at that all the time (like with "status") do that.
To make it clear that we play tricks use the READ_ONCE compiler
barrier (and also for paranoia).
Note that there's not really anything bad going on since even with the
new atomic paths we eventually end up not chasing any pointers (and
hence possibly freed memory and other fun stuff). The locking WARNING
has been added in
commit 88a48e297b
Author: Rob Clark <robdclark@gmail.com>
Date: Thu Dec 18 16:01:50 2014 -0500
drm: add atomic properties
but since drivers are converting not everyone will have seen this from
the start.
Jens reported this and submitted a patch to just grab the
mode_config.connection_mutex, but we can do a bit better.
v2: Remove unused variables I failed to git add for real.
Reference: http://mid.gmane.org/20150928194822.GA3930@kernel.dk
Reported-by: Jens Axboe <axboe@fb.com>
Tested-by: Jens Axboe <axboe@fb.com>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4281f46ef8 upstream.
Instead of only enabling the backlight (which seems to set it to max
brightness), just re-set the current backlight level, which also takes
care of enabling the backlight if necessary.
Only the radeon_atom_encoder_dpms_dig part tested on a Kaveri laptop,
the radeon_atom_encoder_dpms_avivo part is only compile tested.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
