Commit graph

712,399 commits

Author SHA1 Message Date
Gustavo A. R. Silva
1ccca3feff video/mbx: constify fb_fix_screeninfo and fb_var_screeninfo structures
These structures are only used to copy into other structures,
so declare them as const.

This issue was detected using Coccinelle and the following semantic patch:

@r disable optional_qualifier@
identifier i;
position p;
@@
static struct fb_fix_screeninfo i@p = { ... };

@ok@
identifier r.i;
expression e;
position p;
@@
e = i@p

@bad@
position p != {r.p,ok.p};
identifier r.i;
struct fb_fix_screeninfo e;
@@
e@i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct fb_fix_screeninfo i = { ... };

The semantic patch for fb_var_screeninfo is analogous.

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-08-01 17:20:39 +02:00
Lynn Lei
5bbee78a17 video: fbdev: sm712fb.c: fixed constant-left comparison warning
Fixed a constant-left comparison warning issue check by
scripts/checkpatch.pl:
  WARNING: Comparisons should place the constant on the right side of the test

Signed-off-by: Lynn Lei <lynnl.wit@gmail.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-08-01 17:20:38 +02:00
Lynn Lei
142932118c video: fbdev: sm712fb.c: fixed prefer unsigned int warning
Fixed several prefer 'unsigned int' over 'unsigned' warnings checked by
scripts/checkpatch.pl:
  Prefer 'unsigned int' to bare use of 'unsigned'

Signed-off-by: Lynn Lei <lynnl.wit@gmail.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-08-01 17:20:38 +02:00
Lynn Lei
0cdc07ec9b video: fbdev: sm712fb.c: fix unaligned block comments warning
Fixed unaligned block comments warning generated by scripts/checkpatch.pl:
  WARNING: Block comments should align the * on each line

Signed-off-by: Lynn Lei <lynnl.wit@gmail.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-08-01 17:20:38 +02:00
Lynn Lei
ed10eab5f5 video: fbdev: sm712fb.c: using __func__ macro for pr_debug
Inside function sm7xx_vga_setup()

Using a generic function macro for debug information display

Signed-off-by: Lynn Lei <lynnl.wit@gmail.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-08-01 17:20:38 +02:00
Kuninori Morimoto
5161b96dd7 omapfb: use of_graph_get_remote_endpoint()
Now, we can use of_graph_get_remote_endpoint(). Let's use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-08-01 17:20:38 +02:00
Ilya Dryomov
ae78dd8139 libceph: make RECOVERY_DELETES feature create a new interval
This is needed so that the OSDs can regenerate the missing set at the
start of a new interval where support for recovery deletes changed.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2017-08-01 16:46:45 +02:00
Ilya Dryomov
f53b7665c8 libceph: upmap semantic changes
- apply both pg_upmap and pg_upmap_items
- allow bidirectional swap of pg-upmap-items

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2017-08-01 16:46:45 +02:00
Ilya Dryomov
c7ed1a4bf4 crush: assume weight_set != null imples weight_set_size > 0
Reflects ceph.git commit 5e8fa3e06b68fae1582c9230a3a8d1abc6146286.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2017-08-01 16:46:44 +02:00
Ilya Dryomov
e17e8969f5 libceph: fallback for when there isn't a pool-specific choose_arg
There is now a fallback to a choose_arg index of -1 if there isn't
a pool-specific choose_arg set.  If you create a per-pool weight-set,
that works for that pool.  Otherwise we try the compat/default one.  If
that doesn't exist either, then we use the normal CRUSH weights.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2017-08-01 16:46:44 +02:00
Ilya Dryomov
4690faf00c libceph: don't call ->reencode_message() more than once per message
Reencoding an already reencoded message is a bad idea.  This could
happen on Policy::stateful_server connections (!CEPH_MSG_CONNECT_LOSSY),
such as MDS sessions.

This didn't pop up in testing because currently only OSD requests are
reencoded and OSD sessions are always lossy.

Fixes: 98ad5ebd15 ("libceph: ceph_connection_operations::reencode_message() method")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2017-08-01 16:46:43 +02:00
Ilya Dryomov
986e89898a libceph: make encode_request_*() work with r_mempool requests
Messages allocated out of ceph_msgpool have a fixed front length
(pool->front_len).  Asserting that the entire front has been filled
while encoding is thus wrong.

Fixes: 8cb441c054 ("libceph: MOSDOp v8 encoding (actual spgid + full hash)")
Reported-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2017-08-01 16:46:31 +02:00
Mark Brown
60668a2dca Merge remote-tracking branches 'asoc/fix/rt5663', 'asoc/fix/rt5665', 'asoc/fix/samsung', 'asoc/fix/sgtl5000' and 'asoc/fix/sh' into asoc-linus 2017-08-01 15:17:11 +01:00
Mark Brown
440174aca8 Merge remote-tracking branches 'asoc/fix/dpcm', 'asoc/fix/imx', 'asoc/fix/msm8916', 'asoc/fix/multi-pcm', 'asoc/fix/of-graph' and 'asoc/fix/pxa' into asoc-linus 2017-08-01 15:17:06 +01:00
Mark Brown
7e5fed09dd Merge remote-tracking branch 'asoc/fix/intel' into asoc-linus 2017-08-01 15:17:04 +01:00
Tony Lindgren
c0a480d1ac device property: Fix usecount for of_graph_get_port_parent()
Fix inconsistent use of of_graph_get_port_parent() where
asoc_simple_card_parse_graph_dai() does of_node_get() before
calling it while other callers do not. We can fix this by
not trashing the node passed to of_graph_get_port_parent().

Let's also make sure the callers have correct refcounts and remove
related incorrect of_node_put() calls for of_for_each_phandle
as that's done by of_phandle_iterator_next() except when
we break out of the loop early.

Let's fix both issues with a single patch to avoid kobject
refcounts getting messed up more if two patches are merged
separately.

Otherwise strange issues can happen caused by memory corruption
caused by too many kobject_del() calls such as:

BUG: sleeping function called from invalid context at
kernel/locking/mutex.c:747
...
(___might_sleep)
(__mutex_lock)
(mutex_lock_nested)
(kernfs_remove)
(kobject_del)
(kobject_put)
(of_get_next_parent)
(of_graph_get_port_parent)
(asoc_simple_card_parse_graph_dai [snd_soc_simple_card_utils])
(asoc_graph_card_probe [snd_soc_audio_graph_card])

Fixes: 0ef472a973 ("of_graph: add of_graph_get_port_parent()")
Fixes: 2692c1c63c ("ASoC: add audio-graph-card support")
Fixes: 1689333f83 ("ASoC: simple-card-utils: add asoc_simple_card_parse_graph_dai()")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-01 15:15:42 +01:00
Chunfeng Yun
295ad9fbba arm: dts: mt2701: Add usb3 device nodes
Add xhci nodes and usb3 phy nodes for MT2701

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-08-01 16:02:55 +02:00
Sean Wang
7aa125babf arm: dts: mt2701: Add ethernet device node
Add ethernet device node for MT2701

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-08-01 15:52:10 +02:00
Matthias Brugger
275e85971b ARM: mediatek: dts: Cleanup bindings documentation
This patch cleans up the binding documentation stating explicitly
the binding and it's fallback for every SoC.

Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
2017-08-01 15:42:47 +02:00
oder_chiou@realtek.com
818010dac0 ASoC: rt5514: Add the sanity checks of the buffer related address
The patch add the sanity checks of the buffer related address to make sure
the addresses are valid.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-01 14:12:37 +01:00
Arnaldo Carvalho de Melo
c1737f2b78 tools include uapi: Grab copies of drm/{drm,i915_drm}.h
We will use it to generate tables for beautifying ioctl's 'cmd' arg.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-bqoq114h917u6ggazn8m1w0t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-01 09:47:56 -03:00
Arnaldo Carvalho de Melo
1cc47f2d46 perf trace beauty ioctl: Improve 'cmd' beautifier
By using the _IOC_(DIR,NR,TYPE,SIZE) macros to lookup a 'type' keyed
table that then gets indexed by 'nr', falling back to a notation similar
to the one used by 'strace', only more compact, i.e.:

   474.356 ( 0.007 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: (READ|WRITE, 0x64, 0xae, 0x1c), arg: 0x7ffc934f7880) = 0
   474.369 ( 0.053 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: (READ|WRITE, 0x64, 0xb0, 0x18), arg: 0x7ffc934f77d0) = 0
   505.055 ( 0.014 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: (READ|WRITE, 0x64, 0xaf, 0x4), arg: 0x7ffc934f741c) = 0

This also moves it out of builtin-trace.c and into trace/beauty/ioctl.c
to better compartimentalize all these formatters.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-s3enursdxsvnhdomh6qlte4g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-01 09:47:52 -03:00
Jeff Layton
ffb959bbdf mm: remove optimizations based on i_size in mapping writeback waits
Marcelo added this i_size based optimization with a patch in 2004
(commitid is from the linux-history tree):

    commit 765dad09b4ac101a32d87af2bb793c3060497d3c
    Author: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
    Date:   Tue Sep 7 17:51:17 2004 -0700

	small wait_on_page_writeback_range() optimization

	filemap_fdatawait() calls wait_on_page_writeback_range() with -1
	as "end" parameter.  This is not needed since we know the EOF
	from the inode.  Use that instead.

There may be races here, particularly with clustered or network
filesystems. It also seems like a bit of a layering violation since
we're operating on an address_space here, not an inode.

Finally, it's also questionable whether this optimization really helps
on workloads that we care about. Should we be optimizing for writeback
vs. truncate races in a codepath where we expect to wait anyway? It
doesn't seem worth the risk.

Remove this optimization from the filemap_fdatawait codepaths. This
means that filemap_fdatawait becomes a trivial wrapper around
filemap_fdatawait_range.

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
2017-08-01 08:39:29 -04:00
Jeff Layton
3b49c9a1e9 fs: convert a pile of fsync routines to errseq_t based reporting
This patch converts most of the in-kernel filesystems that do writeback
out of the pagecache to report errors using the errseq_t-based
infrastructure that was recently added. This allows them to report
errors once for each open file description.

Most filesystems have a fairly straightforward fsync operation. They
call filemap_write_and_wait_range to write back all of the data and
wait on it, and then (sometimes) sync out the metadata.

For those filesystems this is a straightforward conversion from calling
filemap_write_and_wait_range in their fsync operation to calling
file_write_and_wait_range.

Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
2017-08-01 08:39:29 -04:00
Jeff Layton
d07a6ac7b6 gfs2: convert to errseq_t based writeback error reporting for fsync
Also, fix a place where a writeback error might get dropped in the
gfs2_is_jdata case.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
2017-08-01 08:39:29 -04:00
Jeff Layton
6454568d96 fs: convert sync_file_range to use errseq_t based error-tracking
sync_file_range doesn't call down into the filesystem directly at all.
It only kicks off writeback of pagecache pages and optionally waits
on the result.

Convert sync_file_range to use errseq_t based error tracking, under the
assumption that most users will prefer this behavior when errors occur.

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
2017-08-01 08:39:29 -04:00
Nicolas Pitre
bc2eecd7ec futex: Allow for compiling out PI support
This makes it possible to preserve basic futex support and compile out the
PI support when RT mutexes are not available.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <dvhart@infradead.org>
Link: http://lkml.kernel.org/r/alpine.LFD.2.20.1708010024190.5981@knanqh.ubzr
2017-08-01 14:36:35 +02:00
Marcus Cooper
47bea0c836 ASoC: sun4i-i2s: Extend quirks scope
In preparation for the changes required to support newer SoCs then
quirks has been moved and also added to the device structure.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-01 13:34:57 +01:00
guneshwor.o.singh@intel.com
10a5439f0e ASoC: Intel: Skylake: Fix potential null pointer dereference
Check if the next sink is not null to avoid potential null pointer
dereference in skl_tplg_bind_sinks().

Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-01 13:34:09 +01:00
guneshwor.o.singh@intel.com
693c0fb26a ASoC: Intel: Skylake: Remove return check for skl_codec_create()
Since skl_codec_create() always returns 0, make it return void and remove
return check.

Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-01 13:34:05 +01:00
Dronamraju Santosh P K
3fbbcf4dad ASoC: Intel: bxtn: Remove code loader reference in cleanup
Since Broxton does not use code loader DMA, remove code loader cleanup
in its dsp cleanup routine. Remove the iounmap too as it is done in
skl_free_dsp().

Signed-off-by: Dronamraju Santosh P K <santosh.pavan.kumarx.dronamraju@intel.com>
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-01 13:34:01 +01:00
guneshwor.o.singh@intel.com
60767abcea ASoC: Intel: Skylake: Reset the controller in probe
Controller can be in reset state by default. Capability structure
traversal requires the controller to be out of reset else it
results in broken capability parsing. Hence make sure that controller is
out of reset before parsing capabilities by doing a full reset.

Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-01 13:33:58 +01:00
Viresh Kumar
99d14d0e16 cpufreq: Process remote callbacks from any CPU if the platform permits
On many platforms, CPUs can do DVFS across cpufreq policies. i.e CPU
from policy-A can change frequency of CPUs belonging to policy-B.

This is quite common in case of ARM platforms where we don't
configure any per-cpu register.

Add a flag to identify such platforms and update
cpufreq_can_do_remote_dvfs() to allow remote callbacks if this flag is
set.

Also enable the flag for cpufreq-dt driver which is used only on ARM
platforms currently.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Saravana Kannan <skannan@codeaurora.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-01 14:24:54 +02:00
Viresh Kumar
674e75411f sched: cpufreq: Allow remote cpufreq callbacks
With Android UI and benchmarks the latency of cpufreq response to
certain scheduling events can become very critical. Currently, callbacks
into cpufreq governors are only made from the scheduler if the target
CPU of the event is the same as the current CPU. This means there are
certain situations where a target CPU may not run the cpufreq governor
for some time.

One testcase to show this behavior is where a task starts running on
CPU0, then a new task is also spawned on CPU0 by a task on CPU1. If the
system is configured such that the new tasks should receive maximum
demand initially, this should result in CPU0 increasing frequency
immediately. But because of the above mentioned limitation though, this
does not occur.

This patch updates the scheduler core to call the cpufreq callbacks for
remote CPUs as well.

The schedutil, ondemand and conservative governors are updated to
process cpufreq utilization update hooks called for remote CPUs where
the remote CPU is managed by the cpufreq policy of the local CPU.

The intel_pstate driver is updated to always reject remote callbacks.

This is tested with couple of usecases (Android: hackbench, recentfling,
galleryfling, vellamo, Ubuntu: hackbench) on ARM hikey board (64 bit
octa-core, single policy). Only galleryfling showed minor improvements,
while others didn't had much deviation.

The reason being that this patch only targets a corner case, where
following are required to be true to improve performance and that
doesn't happen too often with these tests:

- Task is migrated to another CPU.
- The task has high demand, and should take the target CPU to higher
  OPPs.
- And the target CPU doesn't call into the cpufreq governor until the
  next tick.

Based on initial work from Steve Muckle.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Saravana Kannan <skannan@codeaurora.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-01 14:24:53 +02:00
Matija Glavinic Pecotic
34f41c0316 timers: Fix overflow in get_next_timer_interrupt
For e.g. HZ=100, timer being 430 jiffies in the future, and 32 bit
unsigned int, there is an overflow on unsigned int right-hand side
of the expression which results with wrong values being returned.

Type cast the multiplier to 64bit to avoid that issue.

Fixes: 46c8f0b077 ("timers: Fix get_next_timer_interrupt() computation")
Signed-off-by: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Cc: khilman@baylibre.com
Cc: akpm@linux-foundation.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/a7900f04-2a21-c9fd-67be-ab334d459ee5@nokia.com
2017-08-01 14:20:53 +02:00
Jerome Brunet
1f737ffa13 clk: meson: mpll: fix mpll0 fractional part ignored
mpll0 clock is special compared to the other mplls. It needs another
bit (ssen) to be set to activate the fractional part the mpll divider

Fixes: 007e6e5c5f ("clk: meson: mpll: add rw operation")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-08-01 14:18:31 +02:00
Rafael J. Wysocki
f5c13f44c7 cpufreq: intel_pstate: Drop INTEL_PSTATE_HWP_SAMPLING_INTERVAL
After commit 62611cb912 (intel_pstate: delete scheduler hook in HWP
mode) the INTEL_PSTATE_HWP_SAMPLING_INTERVAL is not used anywhere in
the code, so drop it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-01 14:14:03 +02:00
Waldemar Rymarkiewicz
762792913f PM / OPP: Fix get sharing CPUs when hotplug is used
We fail dev_pm_opp_of_get_sharing_cpus() when possible CPU device does
not exist. This can happen on platforms where not all possible CPUs
are available at start up ie. hotplugged out.  The CPU device is not
registered in the system so we are not able to check struct device to
set the sharing CPUs bitmask properly.

Example (real use case):
2 physical MIPS cores, 4 VPE, cpu0/2 run Linux and cpu1/3 are not
available for Linux at boot up. cpufreq-dt driver + OPP v2 fail to
register opp_table due to the fact there is no struct device for
cpu1 (remains offline at
bootup).

To solve the bug, stop using device struct to check device_node.
Instead get CPU device_node directly from device tree with
of_get_cpu_node().

Signed-off-by: Waldemar Rymarkiewicz <waldemarx.rymarkiewicz@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-01 14:10:55 +02:00
Jean Delvare
a042e0c62b ACPI / sleep: Make acpi_sleep_syscore_init() static
Function acpi_sleep_syscore_init has no external user so it should be
static.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-01 14:08:36 +02:00
Bartosz Golaszewski
df1e76f28f gpiolib: skip unwanted events, don't convert them to opposite edge
The previous fix for filtering out of unwatched events was not entirely
correct. Instead of skipping the events we don't want, they are now
interpreted as events with opposing edge.

In order to fix it: always read the GPIO line value on interrupt and
only emit the event if it corresponds with the event type we requested.

Cc: stable@vger.kernel.org
Fixes: ad537b8225 ("gpiolib: fix filtering out unwanted events")
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-01 14:07:35 +02:00
Rafael J. Wysocki
1ba51a7c14 ACPI / PCI / PM: Rework acpi_pci_propagate_wakeup()
The acpi_pci_propagate_wakeup() routine is there to handle cases in
which PCI bridges (or PCIe ports) are expected to signal wakeup
for devices below them, but currently it doesn't do that correctly.

The problem is that acpi_pci_propagate_wakeup() uses
acpi_pm_set_device_wakeup() for bridges and if that routine is
called for multiple times to disable wakeup for the same device,
it will disable it on the first invocation and the next calls
will have no effect (it works analogously when called to enable
wakeup, but that is not a problem).

Now, say acpi_pci_propagate_wakeup() has been called for two
different devices under the same bridge and it has called
acpi_pm_set_device_wakeup() for that bridge each time.  The
bridge is now enabled to generate wakeup signals.  Next,
suppose that one of the devices below it resumes and
acpi_pci_propagate_wakeup() is called to disable wakeup for that
device.  It will then call acpi_pm_set_device_wakeup() for the bridge
and that will effectively disable remote wakeup for all devices under
it even though some of them may still be suspended and remote wakeup
may be expected to work for them.

To address this (arguably theoretical) issue, allow
wakeup.enable_count under struct acpi_device to grow beyond 1 in
certain situations.  In particular, allow that to happen in
acpi_pci_propagate_wakeup() when wakeup is enabled or disabled
for PCI bridges, so that wakeup is actually disabled for the
bridge when all devices under it resume and not when just one
of them does that.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2017-08-01 14:05:03 +02:00
Rafael J. Wysocki
99d8845e75 ACPI / PM: Split acpi_device_wakeup()
To prepare for a subsequent change and make the code somewhat easier
to follow, do the following in the ACPI device wakeup handling code:

 * Replace wakeup.flags.enabled under struct acpi_device with
   wakeup.enable_count as that will be necessary going forward.

   For now, wakeup.enable_count is not allowed to grow beyond 1,
   so the current behavior is retained.

 * Split acpi_device_wakeup() into acpi_device_wakeup_enable()
   and acpi_device_wakeup_disable() and modify the callers of
   it accordingly.

 * Introduce a new acpi_wakeup_lock mutex to protect the wakeup
   enabling/disabling code from races in case it is executed
   more than once in parallel for the same device (which may
   happen for bridges theoretically).

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2017-08-01 14:05:03 +02:00
Rafael J. Wysocki
baecc470d5 PCI / PM: Skip bridges in pci_enable_wake()
PCI bridges only have a reason to generate wakeup signals on behalf
of devices below them, so avoid preparing bridges for wakeup directly
in pci_enable_wake().

Also drop the pci_has_subordinate() check from pci_pm_default_resume()
as this will be done by pci_enable_wake() itself now.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2017-08-01 14:05:02 +02:00
Victor Aoqui
75f327c6b7 powerpc/kernel: Avoid preemption check in iommu_range_alloc()
Replace the __this_cpu_read() with raw_cpu_read() in
iommu_range_alloc(). Otherwise we get a warning about using
__this_cpu_read() in preemptible code:

  BUG: using __this_cpu_read() in preemptible
  caller is iommu_range_alloc+0xa8/0x3d0

Preemption doesn't need to be disabled since according to the comment
any CPU can safely use any IOMMU pool.

Signed-off-by: Victor Aoqui <victora@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-01 21:49:23 +10:00
Jan Kiszka
a589e211bd gpio: exar: Use correct property prefix and document bindings
The device-specific property should be prefixed with the vendor name,
not "linux,", as Linus Walleij pointed out. Change this and document the
bindings of this platform device.

We didn't ship the old binding in a release yet. So we can still change
it without breaking an official API.

Fixes: 380b1e2f3a ("gpio-exar/8250-exar: Make set of exported GPIOs configurable")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-01 13:43:55 +02:00
oder_chiou@realtek.com
c1bbaff6d7 ASoC: rt5663: Add the delay time to correct the calibration
The patch adds the delay time to correct the calibration.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-01 12:32:58 +01:00
Bard Liao
7e5824c934 ASoC: rt5665: fix wrong register for bclk ratio control
The register of setting back ratio should be RT5665_ADDA_CLK_2
instead of RT5665_ADDA_CLK_1.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-01 12:32:09 +01:00
Arnd Bergmann
bf11ecb7ee ASoC: codecs: fix wm8524 build error
When CONFIG_OF is disabled, we run into a build error:

sound/soc/codecs/wm8524.c:257:21: error: 'wm8524_of_match' undeclared here (not in a function); did you mean 'wm8524_dai'?

This removes the unnecessary #ifdef around the match table.

Fixes: 007b6a54c3 ("ASoC: codecs: add wm8524 codec driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mihai Serban <mihai.serban@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-01 12:31:37 +01:00
Marc Zyngier
c6f97add0f arm64: Use arch_timer_get_rate when trapping CNTFRQ_EL0
In an ideal world, CNTFRQ_EL0 always contains the timer frequency
for the kernel to use. Sadly, we get quite a few broken systems
where the firmware authors cannot be bothered to program that
register on all CPUs, and rely on DT to provide that frequency.

So when trapping CNTFRQ_EL0, make sure to return the actual rate
(as known by the kernel), and not CNTFRQ_EL0.

Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-08-01 12:14:06 +01:00
Binoy Jayan
6f68f0ac72 HID: Remove the semaphore driver_lock
The semaphore 'driver_lock' is used as a simple mutex, and also unnecessary as
suggested by Arnd. Hence removing it, as the concurrency between the probe and
remove is already handled in the driver core.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-08-01 13:12:46 +02:00