The patch stores the return code of the REQUEST_MAP_RSP sub-CRQ command
in the private data structure, where it can be later checked during
device open or a reset.
In the case of a reset, the mapping request to the vNIC Server may fail,
especially in the case of a partition migration. The driver attempts to
handle this by re-allocating the buffer and re-sending the mapping request.
The original error handling implementation was removed. The separate
function handling the REQUEST_MAP response message was also removed,
since it is now simple enough to be handled in the ibmvnic_handle_crq
function.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reserved area should be eight bytes in length instead of four.
As a result, the return codes in the REQUEST_MAP_RSP descriptors
were not being properly handled.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IS_NOQUOTA() indicates whether quota is disabled for an inode. Ext4
also uses it to check whether an inode is for a quota file. The
distinction currently doesn't matter because quota is disabled only
for the quota files. When we start disabling quota for other inodes
in the future, we will want to make the distinction clear.
Replace IS_NOQUOTA() call with ext4_is_quota_file() at places where
we are checking for quota files.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There will be a second mb_cache instance that tracks ea_inodes. Make
existing names more explicit so that it is clear that they refer to
xattr block cache.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
hwctx's queue_num has been set prior call blk_mq_init_hctx, so no need
set it again.
Signed-off-by: weiping <zhangweiping@didichuxing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Vladislav Yasevich says:
====================
macvlan: Fix some issues with changing mac addresses
There are some issues in macvlan wrt to changing it's mac address.
* An error is returned in the specified address is the same as an already
assigned address.
* In passthru mode, the mac address of the macvlan device doesn't change.
* After changing the mac address of a passthru macvlan and then removing it,
the mac address of the physical device remains changed.
This patch series attempts to resolve these issues.
V2: Address a small issue in p4 where we save the address from the lowerdev
(from girish.moodalbail@oracle.com)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Passthru macvlans directly change the mac address of the lower
level device. That's OK, but after the macvlan is deleted,
the lower device is left with changed address and one needs to
reboot to bring back the origina HW addresses.
This scenario is actually quite common with passthru macvtap devices.
This patch attempts to solve this, by storing the mac address
of the lower device in macvlan_port structure and keeping track of
it through the changes.
After this patch, any changes to the lower device mac address
done trough the macvlan device, will be reverted back. Any
changs done directly to the lower device mac address will be kept.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert the port passthru boolean into flags with accesor functions.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a lower device of the passthru macvlan changes it's address,
passthru macvlan is supposed to change it's own address as well.
However, that doesn't happen correctly because the check in
macvlan_addr_busy() will catch the fact that the lower level
(port) mac address is the same as the address we are trying to
assign to the macvlan, and return an error. As a reasult,
the address of the passthru macvlan device is never changed.
The same thing happens when the user attempts to change the
mac address of the passthru macvlan.
The simple solution appers to be to not check against
the lower device in case of passthru macvlan device, since
the 2 addresses are _supposed_ to be the same.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The user currently gets an EBUSY error when attempting to set
the mac address on a macvlan device to the same value.
This should really be a no-op as nothing changes. Catch
the condition and return early.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a flag to indicate if a queue is rate-limited. Test the flag in
NAPI poll handler and avoid rescheduling the queue if true, otherwise
we risk locking up the host. The rescheduling will be done in the
timer callback function.
Reported-by: Jean-Louis Dupond <jean-louis@dupond.be>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Tested-by: Jean-Louis Dupond <jean-louis@dupond.be>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are number of problems with configuration peer
network device in absence of IFLA_VETH_PEER attributes
where attributes for main network device shared with
peer.
First it is not feasible to configure both network
devices with same MAC address since this makes
communication in such configuration problematic.
This case can be reproduced with following sequence:
# ip link add address 02:11:22:33:44:55 type veth
# ip li sh
...
26: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc \
noop state DOWN mode DEFAULT qlen 1000
link/ether 00:11:22:33:44:55 brd ff:ff:ff:ff:ff:ff
27: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc \
noop state DOWN mode DEFAULT qlen 1000
link/ether 00:11:22:33:44:55 brd ff:ff:ff:ff:ff:ff
Second it is not possible to register both main and
peer network devices with same name, that happens
when name for main interface is given with IFLA_IFNAME
and same attribute reused for peer.
This case can be reproduced with following sequence:
# ip link add dev veth1a type veth
RTNETLINK answers: File exists
To fix both of the cases check if corresponding netlink
attributes are taken from peer_tb when valid or
name based on rtnl ops kind and random address is used.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
cpsw driver tries to get macid for am43xx SoCs using the compatible
ti,am4372. But not all variants of am43x uses this complatible like
epos evm uses ti,am438x. So use a generic compatible ti,am43 to get
macid for all am43 based platforms.
Reviewed-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently in both ipv4 and ipv6 code path, the ack packet received when
sk at TCP_NEW_SYN_RECV state is not filtered by socket filter or cgroup
filter since it is handled from tcp_child_process and never reaches the
tcp_filter inside tcp_v4_rcv or tcp_v6_rcv. Adding a tcp_filter hooks
here can make sure all the ingress tcp packet can be correctly filtered.
Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The memcpy annotation triggers for a fixed-length buffer copy:
In file included from /git/arm-soc/arch/arm64/include/asm/processor.h:30:0,
from /git/arm-soc/arch/arm64/include/asm/spinlock.h:21,
from /git/arm-soc/include/linux/spinlock.h:87,
from /git/arm-soc/include/linux/seqlock.h:35,
from /git/arm-soc/include/linux/time.h:5,
from /git/arm-soc/include/linux/stat.h:21,
from /git/arm-soc/include/linux/module.h:10,
from /git/arm-soc/drivers/net/phy/smsc.c:20:
In function 'memcpy',
inlined from 'smsc_get_strings' at /git/arm-soc/drivers/net/phy/smsc.c:166:3:
/git/arm-soc/include/linux/string.h:309:4: error: call to '__read_overflow2' declared with attribute error: detected read beyond size of object passed as 2nd parameter
Using strncpy instead of memcpy should do the right thing here.
Fixes: 030a89028d ("net: phy: smsc: Implement PHY statistics")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 242d3a49a2 ("ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf")
I assumed NETDEV_REGISTER and NETDEV_UNREGISTER are paired,
unfortunately, as reported by jeffy, netdev_wait_allrefs()
could rebroadcast NETDEV_UNREGISTER event until all refs are
gone.
We have to add an additional check to avoid this corner case.
For netdev_wait_allrefs() dev->reg_state is NETREG_UNREGISTERED,
for dev_change_net_namespace(), dev->reg_state is
NETREG_REGISTERED. So check for dev->reg_state != NETREG_UNREGISTERED.
Fixes: 242d3a49a2 ("ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf")
Reported-by: jeffy <jeffy.chen@rock-chips.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit ("net/phy: micrel: Add workaround for bad autoneg") fixes an
autoneg failure case by resetting the hardware. This turns off
intterupts. Things will work themselves out if the phy polls, as it will
figure out it's state during a poll. However if the phy uses only
intterupts, the phy will stall, since interrupts are off. This patch
fixes the issue by calling config_intr after resetting the phy.
Fixes: d2fd719bcb ("net/phy: micrel: Add workaround for bad autoneg ")
Signed-off-by: Zach Brown <zach.brown@ni.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use Mellanox device ID definitions in the driver's mlx5 ID table so tools
such as 'grep' and 'cscope' can be used to help find correlated material
(such as INTx Masking quirks: d76d2fe05f PCI: Convert Mellanox broken
INTx quirks to be for listed devices only).
No functional change intended.
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Only compile-tested - I don't have the hardware.
>From code inspection, octeon_pci_write_core_mem() appears to be safe wrt
unaligned source. In any case, u8 fbuf[] was not guaranteed to be aligned
anyway.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: Felix Manlunas <felix.manlunas@cavium.com>
CC: Prasad Kanneganti <prasad.kanneganti@cavium.com>
CC: Derek Chickles <derek.chickles@cavium.com>
CC: David Miller <davem@davemloft.net>
CC: netdev@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Acked-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When debugging a kernel panic(), it can be useful to know which CPU
features have been detected by the kernel, as some code paths can depend
on these (and may have been patched at runtime).
This patch adds a notifier to dump the detected CPU caps (as a hex
string) at panic(), when we log other information useful for debugging.
On a Juno R1 system running v4.12-rc5, this looks like:
[ 615.431249] Kernel panic - not syncing: Fatal exception in interrupt
[ 615.437609] SMP: stopping secondary CPUs
[ 615.441872] Kernel Offset: disabled
[ 615.445372] CPU features: 0x02086
[ 615.448522] Memory Limit: none
A developer can decode this by looking at the corresponding
<asm/cpucaps.h> bits. For example, the above decodes as:
* bit 1: ARM64_WORKAROUND_DEVICE_LOAD_ACQUIRE
* bit 2: ARM64_WORKAROUND_845719
* bit 7: ARM64_WORKAROUND_834220
* bit 13: ARM64_HAS_32BIT_EL0
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Steve Capper <steve.capper@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When reading current's user-writable TLS register (which occurs
when dumping core for native tasks), it is possible that userspace
has modified it since the time the task was last scheduled out.
The new TLS register value is not guaranteed to have been written
immediately back to thread_struct in this case.
As a result, a coredump can capture stale data for this register.
Reading the register for a stopped task via ptrace is unaffected.
For native tasks, this patch explicitly flushes the TPIDR_EL0
register back to thread_struct before dumping when operating on
current, thus ensuring that coredump contents are up to date. For
compat tasks, the TLS register is not user-writable and so cannot
be out of sync, so no flush is required in compat_tls_get().
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When reading the FPSIMD state of current (which occurs when dumping
core), it is possible that userspace has modified the FPSIMD
registers since the time the task was last scheduled out. Such
changes are not guaranteed to be reflected immedately in
thread_struct.
As a result, a coredump can contain stale values for these
registers. Reading the registers of a stopped task via ptrace is
unaffected.
This patch explicitly flushes the CPU state back to thread_struct
before dumping when operating on current, thus ensuring that
coredump contents are up to date.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently, VFP registers are omitted from coredumps for compat
processes, due to a bug in the REGSET_COMPAT_VFP regset
implementation.
compat_vfp_get() needs to transfer non-contiguous data from
thread_struct.fpsimd_state, and uses put_user() to handle the
offending trailing word (FPSCR). This fails when copying to a
kernel address (i.e., kbuf && !ubuf), which is what happens when
dumping core. As a result, the ELF coredump core code silently
omits the NT_ARM_VFP note from the dump.
It would be possible to work around this with additional special
case code for the put_user(), but since user_regset_copyout() is
explicitly designed to handle this scenario it is cleaner to port
the put_user() to a user_regset_copyout() call, which this patch
does.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Add support for ARM Common Platform Error Record (CPER).
UEFI 2.6 specification adds support for ARM specific
processor error information to be reported as part of the
CPER records. This provides more detail on for processor error logs.
Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org>
CC: Jonathan (Zhixiong) Zhang <zjzhang@codeaurora.org>
Reviewed-by: James Morse <james.morse@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The ACPI 6.1 spec added a timestamp to the generic error data
entry structure. Print the timestamp out when printing out the
error information.
Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org>
CC: Jonathan (Zhixiong) Zhang <zjzhang@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The ACPI 6.1 spec adds a new revision of the generic error data
entry structure. Add support to handle the new structure as well
as properly verify and iterate through the generic data entries.
Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org>
CC: Jonathan (Zhixiong) Zhang <zjzhang@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
A RAS (Reliability, Availability, Serviceability) controller
may be a separate processor running in parallel with OS
execution, and may generate error records for consumption by
the OS. If the RAS controller produces multiple error records,
then they may be overwritten before the OS has consumed them.
The Generic Hardware Error Source (GHES) v2 structure
introduces the capability for the OS to acknowledge the
consumption of the error record generated by the RAS
controller. A RAS controller supporting GHESv2 shall wait for
the acknowledgment before writing a new error record, thus
eliminating the race condition.
Add support for parsing of GHESv2 sub-tables as well.
Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org>
CC: Jonathan (Zhixiong) Zhang <zjzhang@codeaurora.org>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Make names more generic so that mbcache usage is not limited to
block sharing. In a subsequent patch in the series
("ext4: xattr inode deduplication"), we start using the mbcache code
for sharing xattr inodes. With that patch, old mb_cache_entry.e_block
field could be holding either a block number or an inode number.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since this is a xattr specific data structure it is cleaner to keep it in
xattr header file.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Tracking struct inode * rather than the inode number eliminates the
repeated ext4_xattr_inode_iget() call later. The second call cannot
fail in practice but still requires explanation when it wants to ignore
the return value. Avoid the trouble and make things simple.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
TF is handled a bit differently for syscall and sysret, compared
to the other instructions: TF is checked after the instruction completes,
so that the OS can disable #DB at a syscall by adding TF to FMASK.
When the sysret is executed the #DB is taken "as if" the syscall insn
just completed.
KVM emulates syscall so that it can trap 32-bit syscall on Intel processors.
Fix the behavior, otherwise you could get #DB on a user stack which is not
nice. This does not affect Linux guests, as they use an IST or task gate
for #DB.
This fixes CVE-2017-7518.
Cc: stable@vger.kernel.org
Reported-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
tsc_clocksource_reliable is initialized in check_system_tsc_reliable(), but
it is checked in unsynchronized_tsc() which is called before the
initialization.
In practice that's not an issue because systems which mark the TSC
reliable have X86_FEATURE_CONSTANT_TSC set as well, which is evaluated
in unsynchronized_tsc() before tsc_clocksource_reliable.
Reorder the calls so initialization happens before usage.
[ tglx: Massaged changelog ]
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/b1532ef7-cd9f-45f7-9f49-48dd2a5c2495@default
The issue was that the service routine was sometimes
returning with the wrong flags set in the MSR.
In this case, EIP bit was set while returning to User Mode
which is an illegal combination since exceptions are always
handled in privileged mode.
In order for MicroBlaze to take an interrupt, the MSR must have IE=1,
BIP=0 and EIP=0.
Signed-off-by: Stefan Asserhall <stefana@xilinx.com>
Signed-off-by: Goran Bilski <goran@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
This patch enables CONFIG_BRIDGE=m by default to be aligned
with Xilinx defaults.
Signed-off-by: Vineeth Chowdary Karumanchi <vineethchowz.chowdary@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Add support for Intel and AMD flash devices by default for mmu
configuration.
Signed-off-by: Vineeth Chowdary Karumanchi <vineethchowz.chowdary@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
MMU contains invalid mapping which wasn't flushed and new mapping
is using the same addresses as previous one. That's why TLB miss is not
happening to get new correct TLB entry and MMU points to incorrect area.
This is replicatable when large files(256MB and more) are copied and
checked.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
It was found that SMI_TRESHOLD of 50000 is not enough for Hyper-V
guests in nested environment and falling back to counting jiffies
is not an option for Gen2 guests as they don't have PIT. As Hyper-V
provides TSC frequency in a synthetic MSR we can just use this information
instead of doing a error prone calibration.
Reported-and-tested-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Jork Loeser <jloeser@microsoft.com>
Cc: devel@linuxdriverproject.org
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Link: http://lkml.kernel.org/r/20170622100730.18112-3-vkuznets@redhat.com
Hyper-V TLFS specifies two bits which should be checked before accessing
frequency MSRs:
- AccessFrequencyMsrs (BIT(11) in EAX) which indicates if we have access to
frequency MSRs.
- FrequencyMsrsAvailable (BIT(8) in EDX) which indicates is these MSRs are
present.
Rename and specify these bits accordingly.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Ladi Prosek <lprosek@redhat.com>
Cc: Jork Loeser <jloeser@microsoft.com>
Cc: devel@linuxdriverproject.org
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Link: http://lkml.kernel.org/r/20170622100730.18112-2-vkuznets@redhat.com
ath.git patches for 4.13. Major changes:
wil6210
* add low level RF sector interface via nl80211 vendor commands
* add module parameter ftm_mode to load separate firmware for factory
testing
* support devices with different PCIe bar size
* add support for PCIe D3hot in system suspend
* remove ioctl interface which should not be in a wireless driver
ath10k
* go back to using dma_alloc_coherent() for firmware scratch memory
* add per chain RSSI reporting
This commit adds the Device Tree binding documentation for the Marvell
GICP, an extension to the GIC that allows to trigger GIC SPI interrupts
using memory transactions. It is used by the ICU unit in the Marvell
CP110 block to turn wired interrupts inside the CP into SPI interrupts
at the GIC level in the AP.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Use the builtin_platform_driver() macro to make the code simpler.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The Aspeed 24XX/25XX chips share a single hardware interrupt across 14
separate I2C busses. This adds a dummy irqchip which maps the single
hardware interrupt to software interrupts for each of the busses.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
In addition to introducing the new compatible string the bindings
description is reworked to be more generic.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
struct irq_domain_ops is not modified, so it can be made const.
Cc: Joel Stanley <joel@jms.id.au>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
This reverts commit 353d6d6c82, which is
no longer needed, now that the irq-armada-370-xp driver properly
re-enables per-CPU interrupt on both the boot CPU and secondary CPUs
after resume.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>