Commit graph

255,437 commits

Author SHA1 Message Date
Dmitry Torokhov
eac8a5c91b mfd: menelaus: Remove incorrect __exit markups
Even if bus is not hot-pluggable, the devices can be unbound from the
driver via sysfs, so we should not be using __exit annotations on
remove() methods. The only exception is drivers registered with
platform_driver_probe() which specifically disables sysfs bind/unbind
attributes.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-23 11:47:38 +00:00
Gyungoh Yoo
f705806c9f backlight: Add support Skyworks SKY81452 backlight driver
Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Bryan Wu <cooloney@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-12 09:08:19 +00:00
Gyungoh Yoo
2698dc2229 mfd: Add support for Skyworks SKY81452 driver
Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-12 09:08:12 +00:00
Charles Keepax
e7ad27cac9 mfd: arizona: Add DT binding for the DMIC reference voltages
Add a DT binding that lets the DMIC reference voltage source be
specified for each input.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-12 09:08:01 +00:00
Jacek Anaszewski
224995d780 mfd: max77693: Modify flash cell name identifiers
Change flash cell identifiers from max77693-flash to max77693-led
to avoid confusion with NOR/NAND Flash.

Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-12 09:07:54 +00:00
Raymond Tan
60ae5b9f5c mfd: intel_quark_i2c_gpio: Add Intel Quark X1000 I2C-GPIO MFD Driver
In Quark X1000, there's a single PCI device that provides both
an I2C controller and a GPIO controller. This MFD driver will
split the 2 devices for their respective drivers.

This patch is based on Josef Ahmad's initial work for Quark enabling.

Acked-by: Michael Turquette <mturquette@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Weike Chen <alvin.chen@intel.com>
Signed-off-by: Raymond Tan <raymond.tan@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-12 09:07:17 +00:00
Chris Zhong
e19f742885 mfd: rk808: Disable the under voltage detect
Rk808 has a under voltage detect function, when the voltage of buck is
under 85% the target voltage, the buck output will reset. But if the
power load is too heavy, this function maybe err, when current over
4.2A, although the voltage is normal, but RK808 mistakenly think it is
under 85%, and reset the buck. So let's disable this function.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-12 09:07:10 +00:00
Joe Perches
9a503a7d9c mfd: ab8500-debugfs: Remove use of seq_printf return value
The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c03 ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-12 09:07:03 +00:00
Artem Savkov
23a2a22a3f mfd: rt5033: MFD_RT5033 needs to select REGMAP_IRQ
Since commit 0b2712585(linux-next.git) this driver uses regmap_irq and so needs
to select REGMAP_IRQ.

This fixes the following compilation errors:
ERROR: "regmap_irq_get_domain" [drivers/mfd/rt5033.ko] undefined!
ERROR: "regmap_add_irq_chip" [drivers/mfd/rt5033.ko] undefined!

Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-12 09:06:54 +00:00
Adam Ward
ed05be5664 mfd: da9052: Register ability of device to cause a wake-up interrupt
Signed-off-by: Adam Ward <adam.ward.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-12 09:06:48 +00:00
Adam Ward
72e341c48f mfd: da9052: Fix register access via SPI
The range of registers used by this driver exceeds that available
via SPI with no paging (127), so we have to override the values
from the default config which is set-up for I2C access.
Also change SPI settings to match device's recommended OTP values.

Signed-off-by: Adam Ward <adam.ward.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-12 09:06:40 +00:00
Jaewon Kim
c7f585fe46 mfd: max77843: Add max77843 MFD driver core driver
This patch adds MAX77843 core/irq driver to support PMIC,
MUIC(Micro USB Interface Controller), Charger, Fuel Gauge,
LED and Haptic device.

Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-04 08:18:28 +00:00
Flora Fu
6df8dd5c18 mfd: Add support for the MediaTek MT6397 PMIC
This adds support for the MediaTek MT6397 PMIC. This is a
multifunction device with the following sub modules:

- Regulator
- RTC
- Audio codec
- GPIO
- Clock

It is interfaced to the host controller using SPI interface by a proprietary
hardware called PMIC wrapper or pwrap. MT6397 MFD is a child device of the
pwrap.

Signed-off-by: Flora Fu, MediaTek
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-04 08:18:27 +00:00
Krzysztof Kozlowski
82a00c49ed mfd: sec: Remove unnecessary out of memory message
There is no need to print additional ENOMEM message for
sec_platform_data allocation failure.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03 17:30:26 +00:00
Krzysztof Kozlowski
ef9c80b37a mfd: sec: Cleanup unused RTC fields: ono, WTSR and SMPL
The WTSR (Watchdog Timer Software Reset) and SMPL (Sudden Momentary
Power Loss) were removed from rtc-s5m driver because they were not used.
Remove them (and on/off interrupt) from main MFD driver and header.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03 17:30:18 +00:00
Krzysztof Kozlowski
fbf2c4a7b6 mfd: da9150: Constify struct regmap_config
The regmap_config struct may be const because it is not modified by the
driver and regmap_init() accepts pointer to const.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03 16:41:23 +00:00
Krzysztof Kozlowski
2600abca14 rtc: s5m: Remove unused watchdog and sudden momentary power loss
The WTSR (Watchdog Timer Software Reset) and SMPL (Sudden Momentary
Power Loss) are never enabled. These are left-overs from board files.
After removing them the driver's shutdown callback is empty so get rid
of it as well.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03 16:41:22 +00:00
Micky Ching
0523b8f414 mfd: rtsx: Using pcr_dbg replace dev_dbg
pcr_dbg is a wrapper of dev_dbg, which can save some code,
and help to enable/disable debug message static.

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03 16:41:21 +00:00
Micky Ching
41bc233473 mfd: rtsx: Add support for rts525A
Add support for new chip rts525A.

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03 16:41:21 +00:00
Micky Ching
663c425f2c mfd: rtsx: Add support for rts524A
add support for new chip rts524A.

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03 16:41:20 +00:00
Micky Ching
19f3bd548f mfd: rtsx: Remove LCTLR defination
To enable/disable ASPM we should find LINK CONTROL register
in PCI config space. All old chip use 0x80 address, but new
chip may use another address, so we using pci_find_capability()
to get LINK CONTROL address.

rtsx_gops.c was removed, we consider to put some common operations
to this file, but the actual thing is, only a group of chips
are in common ops1, and another group of chips in common ops2,
it is hard to decide put which ops into generic ops file.

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03 16:41:19 +00:00
Micky Ching
b038538104 mfd: rtsx: Update phy register
Update some phy register name and value for rts5249,
the updated value makes chip more stable on some platform.

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03 16:41:19 +00:00
Micky Ching
e89f231826 mfd: rtsx: Update driving settings
update card drive settings, This setting can be used for rts5249
rts524A and rts525A.

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03 16:41:18 +00:00
Micky Ching
9e33ce79f8 mfd: rtsx: Update PETXCFG address
PETXCFG is defined at 0xFF03, the old 0xFE49 not used any more.

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03 16:41:17 +00:00
Vignesh R
b10848e6f9 mfd: ti_am335x_tscadc: Remove unwanted reg_se_cache save
In one shot mode, sequencer automatically disables all enabled steps at
the end of each cycle. (both ADC steps and TSC steps) Hence these steps
need not be saved in reg_se_cache for clearing these steps at a later
stage.
Also, when ADC wakes up Sequencer should not be busy executing any of the
config steps except for the charge step. Previously charge step was 1 ADC
clock cycle and hence it was ignored.
TSC steps are always disabled at the end of each conversion cycle, hence
there is no need to explicitly disable TSC steps by writing 0 to REG_SE.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03 16:41:15 +00:00
Pawel Moll
f0bd7ccc41 mfd: vexpress: Remove non-DT code
Now, as all VE platforms have to be booted with DT,
the code handling non-DT case can be removed.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03 16:41:14 +00:00
Michael Brunner
fb358e438d mfd: Add support for COMe-cBL6 to Kontron PLD driver
This patch adds the DMI system ID of the Kontron COMe-cBL6 board to
the Kontron PLD driver. The list of supported products in the module
description is also updated.

Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
Acked-by: Christian Rauch <christian.rauch@kontron.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03 16:41:14 +00:00
Todd Brandt
d638787411 mfd: axp20x: Change battery cell name to fuel gauge
Name changes to the battery cell structure to a
more generic cell type: fuel gauge.

Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Acked-By: Sebastian Reichel <sre@kernel.org>
Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03 16:41:13 +00:00
Jarkko Nikula
9dc502195a mfd: intel_soc_pmic: Ensure GPIO irq is set to input pin
Surely GPIO irq will be used as an input pin so make sure its direction is
set after requesting.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03 16:41:12 +00:00
Jarkko Nikula
ad7b5a175c mfd: intel_soc_pmic: Do not mangle error code from devm_gpiod_get_index()
It is usually better to pass actual error code from a function call than
mangling it to another.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03 16:41:12 +00:00
Jarkko Nikula
9c98dcb08c mfd: intel_soc_pmic: Move PMIC interrupt comment to probe function
intel_soc_pmic_find_gpio_irq() tries to find a GPIO interrupt but doesn't
select between it or I2C interrupt so it makes more sense to move this
comment to intel_soc_pmic_i2c_probe() with minor edits.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03 16:41:11 +00:00
Richard Fitzgerald
2f2b6aa8c5 extcon: arizona: Add support for WM8280/WM8281
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-26 10:04:44 +00:00
Richard Fitzgerald
449c175ec6 gpio: arizona: Add support for WM8280/WM8281
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-26 10:04:43 +00:00
Richard Fitzgerald
f7293114b4 regulator: arizona-micsupp: Add support for WM8280/WM8281
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-26 10:04:43 +00:00
Richard Fitzgerald
e5d4ef0d73 mfd: arizona: Add support for WM8280/WM8281
This adds support for the Wolfson Microelectronics WM8280 and WM8281
codecs.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
[Lee: Minor fixup to remove potentially uninitialised variable. ]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-26 10:04:07 +00:00
Linus Torvalds
be5e6616dd Merge branch 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more vfs updates from Al Viro:
 "Assorted stuff from this cycle.  The big ones here are multilayer
  overlayfs from Miklos and beginning of sorting ->d_inode accesses out
  from David"

* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (51 commits)
  autofs4 copy_dev_ioctl(): keep the value of ->size we'd used for allocation
  procfs: fix race between symlink removals and traversals
  debugfs: leave freeing a symlink body until inode eviction
  Documentation/filesystems/Locking: ->get_sb() is long gone
  trylock_super(): replacement for grab_super_passive()
  fanotify: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions
  Cachefiles: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions
  VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry)
  SELinux: Use d_is_positive() rather than testing dentry->d_inode
  Smack: Use d_is_positive() rather than testing dentry->d_inode
  TOMOYO: Use d_is_dir() rather than d_inode and S_ISDIR()
  Apparmor: Use d_is_positive/negative() rather than testing dentry->d_inode
  Apparmor: mediated_filesystem() should use dentry->d_sb not inode->i_sb
  VFS: Split DCACHE_FILE_TYPE into regular and special types
  VFS: Add a fallthrough flag for marking virtual dentries
  VFS: Add a whiteout dentry type
  VFS: Introduce inode-getting helpers for layered/unioned fs environments
  Infiniband: Fix potential NULL d_inode dereference
  posix_acl: fix reference leaks in posix_acl_create
  autofs4: Wrong format for printing dentry
  ...
2015-02-22 17:42:14 -08:00
Linus Torvalds
a135c717d5 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS:

   - a number of fixes that didn't make the 3.19 release.

   - a number of cleanups.

   - preliminary support for Cavium's Octeon 3 SOCs which feature up to
     48 MIPS64 R3 cores with FPU and hardware virtualization.

   - support for MIPS R6 processors.

     Revision 6 of the MIPS architecture is a major revision of the MIPS
     architecture which does away with many of original sins of the
     architecture such as branch delay slots.  This and other changes in
     R6 require major changes throughout the entire MIPS core
     architecture code and make up for the lion share of this pull
     request.

   - finally some preparatory work for eXtendend Physical Address
     support, which allows support of up to 40 bit of physical address
     space on 32 bit processors"

     [ Ahh, MIPS can't leave the PAE brain damage alone.  It's like
       every CPU architect has to make that mistake, but pee in the snow
       by changing the TLA.  But whether it's called PAE, LPAE or XPA,
       it's horrid crud   - Linus ]

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (114 commits)
  MIPS: sead3: Corrected get_c0_perfcount_int
  MIPS: mm: Remove dead macro definitions
  MIPS: OCTEON: irq: add CIB and other fixes
  MIPS: OCTEON: Don't do acknowledge operations for level triggered irqs.
  MIPS: OCTEON: More OCTEONIII support
  MIPS: OCTEON: Remove setting of processor specific CVMCTL icache bits.
  MIPS: OCTEON: Core-15169 Workaround and general CVMSEG cleanup.
  MIPS: OCTEON: Update octeon-model.h code for new SoCs.
  MIPS: OCTEON: Implement DCache errata workaround for all CN6XXX
  MIPS: OCTEON: Add little-endian support to asm/octeon/octeon.h
  MIPS: OCTEON: Implement the core-16057 workaround
  MIPS: OCTEON: Delete unused COP2 saving code
  MIPS: OCTEON: Use correct instruction to read 64-bit COP0 register
  MIPS: OCTEON: Save and restore CP2 SHA3 state
  MIPS: OCTEON: Fix FP context save.
  MIPS: OCTEON: Save/Restore wider multiply registers in OCTEON III CPUs
  MIPS: boot: Provide more uImage options
  MIPS: Remove unneeded #ifdef __KERNEL__ from asm/processor.h
  MIPS: ip22-gio: Remove legacy suspend/resume support
  mips: pci: Add ifdef around pci_proc_domain
  ...
2015-02-21 19:41:38 -08:00
Linus Torvalds
c8c6c9ba39 SCSI misc on 20150221
This is a short patch set representing a couple of left overs from the merge
 window (debug leftover removal and MAINTAINER changes) plus one merge window
 regression (the local workqueue for hpsa) and a set of bug fixes for several
 issues (two for scsi-mq and the rest an assortment of long standing stuff, all
 cc'd to stable).
 
 Signed-off-by: James Bottomley <JBottomley@Parallels.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABAgAGBQJU6UPVAAoJEDeqqVYsXL0MsjcIAKRGhJQf8PAprBC/vByJcysJ
 91VnXQcJb7Ypqicj6rpkRNX+5UpehLcWIVL0E1Q4KHdirvQv3b6icXhGmntyZdYZ
 URlhqDxKo9+Z+tNoeqVPNenSvVSAlfMNBRXfTo+oo1hpPUz5VrySmpmgEOuJrzXF
 qb1FMnRXebIFIo60QUA/7n+3zDBFZXW/IBY5lLO9/v7+fTe8wh5qNvXvf7DiOJ56
 qPkWNpJC5vDyOHwTHYK+aM8kl5/x777DU/sx5ajitlyrH1cD9d69Zjj70IKo3P7G
 Y5dQA14kRnLJc5xnwBztHguESwGTnDCSti1owg0CvJWUZlcjxYkY/iXd8rAMGWc=
 =P5NR
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull misc SCSI patches from James Bottomley:
 "This is a short patch set representing a couple of left overs from the
  merge window (debug removal and MAINTAINER changes).

  Plus one merge window regression (the local workqueue for hpsa) and a
  set of bug fixes for several issues (two for scsi-mq and the rest an
  assortment of long standing stuff, all cc'd to stable)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  sg: fix EWOULDBLOCK errors with scsi-mq
  sg: fix unkillable I/O wait deadlock with scsi-mq
  sg: fix read() error reporting
  wd719x: add missing .module to wd719x_template
  hpsa: correct compiler warnings introduced by hpsa-add-local-workqueue patch
  fixed invalid assignment of 64bit mask to host dma_boundary for scatter gather segment boundary limit.
  fcoe: Transition maintainership to Vasu
  am53c974: remove left-over debugging code
2015-02-21 19:16:42 -08:00
Linus Torvalds
cd50b70ccd Additional power management and ACPI updates for v3.20-rc1
- Revert a recent ACPI LPSS driver commit that prevented the touchpad
    driver from loading on Dell XPS13 (Jarkko Nikula).
 
  - Make the ACPI LPSS driver disable the I2C controllers and deassert
    SPI host controllers resets at startup on Intel BayTrail and Braswell
    SoCs in case they have been left in wrong states by the platform
    firmware which then may casuse fatal controller driver failures during
    resume from hibernation (Mika Westerberg).
 
  - Make two recently added ACPI EC messages look better (Scot Doyle).
 
  - Reduce the printk level of a recently added debug message related to
    ACPI resources that may become noisy in some cases (Rafael J Wysocki).
 
  - Add a new ACPI backlight blacklist entry for Samsung Series 9
    (900X3C/900X3D/900X3E/900X4C/900X4D) laptops where the native backlight
    interface doesn't work while the ACPI based one does (Jens Reyer).
 
  - Make the PNP sybsystem's core code use __request_region() followed by
    __release_region() instead of __check_region() which then will allow
    us to get rid of the latter as it has no more users (Jakub Sitnicki).
 
  - Fix a build breakage and an issue with two __init functions that may be
    called after initialization in the s3c cpufreq driver (Arnd Bergmann).
 
  - Make the powernv cpuidle driver read target_residency values for idle
    states from a Device Tree (as we have the suitable DT bindings for that
    now) and improve the parsing of the powermgmt DT node in that driver
    (Preeti U Murthy).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJU6Ak8AAoJEILEb/54YlRx1IIP/3AJFuLlgQ15rFAMV5c1Wel8
 RhyD0JcucgtGu9bLoFj2wMpy/FDv+zpqp4vF5qrgcY3OcKoBYvM18HzDbFyiThqo
 4aTZEeuv14ipstBqPwt8aABAjWZ9elEb0h3zuEgekoc9UUpMYzHhSUaKbWzNHfd9
 Uba6+aS1haE9zWeVJw+30uWFy42SLgbu1qDWizq/Lg+jUMRJvNsPsDzeTF4mP5Vs
 aF4BD0Fo9X2spnSYK16dHq08lQ7UzkHCAj9aY8KCHVIWwOOMjM7/kpa0TRNNqIm0
 7UIH+ZwX8gGBJ2WQ1vQXESI0veJdH5B+xXtsaxXz+5VEWBI9sf4QjM7bti+HaGSw
 wgB5bgV3gV9T9uNbmwTCBkC9qRt+6cvqxLvH+z85l/U2cDMr0UqP4YlStqupfWOW
 fXTUsL7pmy9tKtzeaKzoBxKooRSMZg/GmscHtHlb4Ps+Vu/3vHsw7fJ3cOylvcT1
 3IFtTt2JWicKWr3zcDtcqRBSgCLwUgLS8Zh25O7UT9WfNjo897Rccdta1jWvZppQ
 SLZxBB+SZGWe8s/RucwmYEB4+gKP8dNIPFIuVTK6RkMAnL4Iv13cNR/1X1GyaLpF
 exvs9i0/bIYVDfRXlVaS3RRSDKKZkNJdddQUD27PrCKRffOezjzBV+gohadXFbbn
 tkou9vHrphL0Zql/y6Iw
 =us59
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.20-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull one more batch of power management and ACPI updates from Rafael Wysocki:
 "These are mostly fixes on top of the previously merged recent PM and
  ACPI material.

  First, one commit that broke the ACPI LPSS (Low-Power Subsystem)
  driver on a Dell box is reverted and there are two stable-candidate
  fixes for that driver.  Another fix cleans up two recently added ACPI
  EC messages that look odd and the printk level of a noisy debug
  message in the core ACPI resources handling code is reduced.

  In addition to that we have two stable-candidate fixes for the s3c
  cpufreq driver, two cpuidle powernv driver updates related to Device
  Trees and a PNP subsystem cleanup that will allow us to get rid of
  some old ugliness going forward.  Also there is a new blacklist entry
  for the ACPI backlight code.

  Specifics:

   - Revert a recent ACPI LPSS driver commit that prevented the touchpad
     driver from loading on Dell XPS13 (Jarkko Nikula).

   - Make the ACPI LPSS driver disable the I2C controllers and deassert
     SPI host controllers resets at startup on Intel BayTrail and
     Braswell SoCs in case they have been left in wrong states by the
     platform firmware which then may casuse fatal controller driver
     failures during resume from hibernation (Mika Westerberg).

   - Make two recently added ACPI EC messages look better (Scot Doyle).

   - Reduce the printk level of a recently added debug message related
     to ACPI resources that may become noisy in some cases (Rafael J
     Wysocki).

   - Add a new ACPI backlight blacklist entry for Samsung Series 9
     (900X3C/900X3D/900X3E/900X4C/900X4D) laptops where the native
     backlight interface doesn't work while the ACPI based one does
     (Jens Reyer).

   - Make the PNP sybsystem's core code use __request_region() followed
     by __release_region() instead of __check_region() which then will
     allow us to get rid of the latter as it has no more users (Jakub
     Sitnicki).

   - Fix a build breakage and an issue with two __init functions that
     may be called after initialization in the s3c cpufreq driver (Arnd
     Bergmann).

   - Make the powernv cpuidle driver read target_residency values for
     idle states from a Device Tree (as we have the suitable DT bindings
     for that now) and improve the parsing of the powermgmt DT node in
     that driver (Preeti U Murthy)"

* tag 'pm+acpi-3.20-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpuidle: powernv: Avoid endianness conversions while parsing DT
  cpufreq: s3c: remove last use of resume_clocks callback
  cpufreq: s3c: remove incorrect __init annotations
  ACPI / LPSS: Deassert resets for SPI host controllers on Braswell
  ACPI / LPSS: Always disable I2C host controllers
  ACPI / resources: Change pr_info() to pr_debug() for debug information
  ACPI / video: Disable native backlight on Samsung Series 9 laptops
  cpuidle: powernv: Read target_residency value of idle states from DT if available
  Revert "ACPI / LPSS: Remove non-existing clock control from Intel Lynxpoint I2C"
  ACPI / EC: Remove non-standard log emphasis
  PNP: Switch from __check_region() to __request_region()
2015-02-21 13:40:41 -08:00
Linus Torvalds
2bfedd1d9f Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull followup block layer updates from Jens Axboe:
 "Two things in this pull request:

   - A block throttle oops fix (marked for stable) from Thadeu.

   - The NVMe fixes/features queued up for 3.20, but merged later in the
     process.  From Keith.  We should have gotten this merged earlier,
     we're ironing out the kinks in the process.  Will be ready for the
     initial pull next series"

* 'for-linus' of git://git.kernel.dk/linux-block:
  blk-throttle: check stats_cpu before reading it from sysfs
  NVMe: Fix potential corruption on sync commands
  NVMe: Remove unused variables
  NVMe: Fix scsi mode select llbaa setting
  NVMe: Fix potential corruption during shutdown
  NVMe: Asynchronous controller probe
  NVMe: Register management handle under nvme class
  NVMe: Update SCSI Inquiry VPD 83h translation
  NVMe: Metadata format support
2015-02-21 13:36:02 -08:00
Linus Torvalds
a911dcdba1 - Significant dm-crypt CPU scalability performance improvements thanks
to changes that enable effective use of an unbound workqueue across
   all available CPUs.  A large battery of tests were performed to
   validate these changes, summary of results is available here:
   https://www.redhat.com/archives/dm-devel/2015-February/msg00106.html
 
 - A few additional stable fixes (to DM core, dm-snapshot and dm-mirror)
   and a small fix to the dm-space-map-disk.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJU51MsAAoJEMUj8QotnQNan8wH/3Oa2/ofbX8zNYtdDxFBK7W0
 pHwVA2CH9yzDDi90X9GsQODmXerMrYf+SHo/RsQTpSnt5WI/4ZVP/1EoNGu6T2Yr
 XiaKc/Jwo+ScxdhoHSNtyGL5vKeipX6clgz1wcd/4/UBcBAr0Vxj25s8Ta7naK2V
 hZyWnt3MCGEDQ45NVBmLOU78Cl68LGf8JOUY0l3cd8ehQjGyR9a12GXwRktepslp
 hw9xu8uYmE93fD+MIe/fUs7W/WvIVgFSskhswlvD3kAFpEAsMczjLGVSRQlBE90L
 OK7v1HKxiIUJa17g3LmiCFa59ZjrnSHGpOOv9IPAFU/LzFIU47lcFwRFjgfB8po=
 =8vFi
 -----END PGP SIGNATURE-----

Merge tag 'dm-3.20-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull more device mapper changes from Mike Snitzer:

- Significant dm-crypt CPU scalability performance improvements thanks
  to changes that enable effective use of an unbound workqueue across
  all available CPUs.  A large battery of tests were performed to
  validate these changes, summary of results is available here:
  https://www.redhat.com/archives/dm-devel/2015-February/msg00106.html

- A few additional stable fixes (to DM core, dm-snapshot and dm-mirror)
  and a small fix to the dm-space-map-disk.

* tag 'dm-3.20-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm snapshot: fix a possible invalid memory access on unload
  dm: fix a race condition in dm_get_md
  dm crypt: sort writes
  dm crypt: add 'submit_from_crypt_cpus' option
  dm crypt: offload writes to thread
  dm crypt: remove unused io_pool and _crypt_io_pool
  dm crypt: avoid deadlock in mempools
  dm crypt: don't allocate pages for a partial request
  dm crypt: use unbound workqueue for request processing
  dm io: reject unsupported DISCARD requests with EOPNOTSUPP
  dm mirror: do not degrade the mirror on discard error
  dm space map disk: fix sm_disk_count_is_more_than_one()
2015-02-21 13:28:45 -08:00
Linus Torvalds
e20d3ef540 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target updates from Nicholas Bellinger:
 "The highlights this round include:

   - Update vhost-scsi to support F_ANY_LAYOUT using mm/iov_iter.c
     logic, and signal VERSION_1 support (MST + Viro + nab)

   - Fix iscsi/iser-target to remove problematic active_ts_set usage
     (Gavin Guo)

   - Update iscsi/iser-target to support multi-sequence sendtargets
     (Sagi)

   - Fix original PR_APTPL_BUF_LEN 8k size limitation (Martin Svec)

   - Add missing WRITE_SAME end-of-device sanity check (Bart)

   - Check for LBA + sectors wrap-around in sbc_parse_cdb() (nab)

   - Other various minor SPC/SBC compliance fixes based upon Ronnie
     Sahlberg test suite (nab)"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (32 commits)
  target: Set LBPWS10 bit in Logical Block Provisioning EVPD
  target: Fail UNMAP when emulate_tpu=0
  target: Fail WRITE_SAME w/ UNMAP=1 when emulate_tpws=0
  target: Add sanity checks for DPO/FUA bit usage
  target: Perform PROTECT sanity checks for WRITE_SAME
  target: Fail I/O with PROTECT bit when protection is unsupported
  target: Check for LBA + sectors wrap-around in sbc_parse_cdb
  target: Add missing WRITE_SAME end-of-device sanity check
  iscsi-target: Avoid IN_LOGOUT failure case for iser-target
  target: Fix PR_APTPL_BUF_LEN buffer size limitation
  iscsi-target: Drop problematic active_ts_list usage
  iscsi/iser-target: Support multi-sequence sendtargets text response
  iser-target: Remove duplicate function names
  vhost/scsi: potential memory corruption
  vhost/scsi: Global tcm_vhost -> vhost_scsi rename
  vhost/scsi: Drop left-over scsi_tcq.h include
  vhost/scsi: Set VIRTIO_F_ANY_LAYOUT + VIRTIO_F_VERSION_1 feature bits
  vhost/scsi: Add ANY_LAYOUT support in vhost_scsi_handle_vq
  vhost/scsi: Add ANY_LAYOUT iov -> sgl mapping prerequisites
  vhost/scsi: Change vhost_scsi_map_to_sgl to accept iov ptr + len
  ...
2015-02-21 13:21:19 -08:00
Linus Torvalds
1acd2de5fa Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull more input updates from Dmitry Torokhov:
 "The second round of updates for the input subsystem.

  Updates to ALPS an bfin_roraty drivers and a couple oother fixups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: psmouse - use IS_ENABLED instead of homegrown code
  Input: bfin_rotary - introduce open and close methods
  Input: bfin_rotary - convert to use managed resources
  Input: bfin_rotary - use generic IO functions
  Input: bfin_rotary - move pin lists into into platform data
  Input: bfin_rotary - move platform header to linux/platform_data
  Input: bfin_rotary - mark suspend and resume code as __maybe_unused
  Input: bfin_rotary - fix potential oops in interrupt handler
  Input: ALPS - move v7 packet info to Documentation and v6 packet info
  Input: ALPS - fix confusing comment in protocol data
  Input: ALPS - do not mix trackstick and external PS/2 mouse data
  Input: ALPS - fix trackstick detection on some Dell Latitudes
  Input: ALPS - consolidate setting protocol parameters
  Input: ALPS - split protocol data from model info
  Input: ALPS - make Rushmore a separate protocol
  Input: ALPS - renumber protocol numbers
  Input: adi - remove an unnecessary check
  Input: pxa27x_keypad - remove an unneeded NULL check
  Input: soc_button_array - use "Windows" key for "Home"
2015-02-21 12:59:04 -08:00
Linus Torvalds
b5ccb078c8 InfiniBand/RDMA changes for 3.20 merge window:
- Re-enable on-demand paging changes with stable ABI
  - Fairly large set of ocrdma HW driver fixes
  - Some qib HW driver fixes
  - Other miscellaneous changes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJU52nHAAoJEENa44ZhAt0hkycP/0vwYNl0JJadasSUrLm2AWje
 iAePU+K7uiyxSuIU+eLnyyDV/iQ2sCjXfhQNE6FnFhH3JjwBYbhS2Q8WcjwfRWYX
 iFhORQltb3spSeLdT7N1QfkMF4MtAw3ENPE3QKIgNaIQSso+J256BHrSiqr9Akwe
 hwIVr0TLDO59ggPs3c083uUhC+5AMViMVgRR+N9+/59WHz2vG2WsTunpg1sYOAgC
 KpUhfZW4za5xYJ0c8BOnPiSAfJasD1UdDg3oX0RPD4j/diiWAO6EOR+jkOLtODpd
 8uhD8HM7ZvCKE1io5QnVdjTR/n51NaVGHk+yfWJRSvV1sw1AALtU4NVniI+E5mFs
 Fwe+zUzbQ3j08TtrU0VjaeteBh2oGC0pJlkJS9+HXeDmH30/LQCMCiA5mBSSEPDg
 0cPEAJgGAZqOIyyZe8jSslW/iN0cE6FDDb8+/1AZ80IfbdMxXh9FVwi7cdXn8+OQ
 nXmtnSa7yzKWS9VVXDrvSzI0Y2oDv8DSDpCWGCm7bUcDXd/T5LpPR3RdSorGkYAr
 O2zmuJZlCdkuKgW91O7cztNj2hTlDnJ+e+5P05KwPOb86Muum6tphLJd5b1h970X
 Actx/6EX/ycSQ3ukiKW7Ksn2bYD3RLZvdbPYQM5xUjlGGWPF6nvmbZ8MqnyaLFfE
 WKvx39DMGq3ktofiMkbf
 =JLsF
 -----END PGP SIGNATURE-----

Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband

Pull InfiniBand/RDMA updates from Roland Dreier:
 - Re-enable on-demand paging changes with stable ABI
 - Fairly large set of ocrdma HW driver fixes
 - Some qib HW driver fixes
 - Other miscellaneous changes

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (43 commits)
  IB/qib: Add blank line after declaration
  IB/qib: Fix checkpatch warnings
  IB/mlx5: Enable the ODP capability query verb
  IB/core: Add on demand paging caps to ib_uverbs_ex_query_device
  IB/core: Add support for extended query device caps
  RDMA/cxgb4: Don't hang threads forever waiting on WR replies
  RDMA/ocrdma: Fix off by one in ocrdma_query_gid()
  RDMA/ocrdma: Use unsigned for bit index
  RDMA/ocrdma: Help gcc generate better code for ocrdma_srq_toggle_bit
  RDMA/ocrdma: Update the ocrdma module version string
  RDMA/ocrdma: set vlan present bit for user AH
  RDMA/ocrdma: remove reference of ocrdma_dev out of ocrdma_qp structure
  RDMA/ocrdma: Add support for interrupt moderation
  RDMA/ocrdma: Honor return value of ocrdma_resolve_dmac
  RDMA/ocrdma: Allow expansion of the SQ CQEs via buddy CQ expansion of the QP
  RDMA/ocrdma: Discontinue support of RDMA-READ-WITH-INVALIDATE
  RDMA/ocrdma: Host crash on destroying device resources
  RDMA/ocrdma: Report correct state in ibv_query_qp
  RDMA/ocrdma: Debugfs enhancments for ocrdma driver
  RDMA/ocrdma: Report correct count of interrupt vectors while registering ocrdma device
  ...
2015-02-21 12:53:21 -08:00
Linus Torvalds
295324556c Merge branch 'i2c/for-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
 "Summary:

   - legacy PM code removed from the core, there were no users anymore
     (thanks to Lars-Peter Clausen)

   - new driver for Broadcom iProc

   - bigger driver updates for designware, rk3x, cadence, ocores

   - a bunch of smaller updates and bugfixes"

* 'i2c/for-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (31 commits)
  i2c: ocores: rework clk code to handle NULL cookie
  i2c: designware-baytrail: another fixup for proper Kconfig dependencies
  i2c: fix reference to functionality constants definition
  i2c: iproc: Add Broadcom iProc I2C Driver
  i2c: designware-pci: update Intel copyright line
  i2c: ocores: add common clock support
  i2c: hix5hd2: add COMPILE_TEST
  i2c: clarify comments about the dev_released completion
  i2c: ocores: fix clock-frequency binding usage
  i2c: tegra: Maintain CPU endianness
  i2c: designware-baytrail: use proper Kconfig dependencies
  i2c: designware: Do not calculate SCL timing parameters needlessly
  i2c: do not try to load modules for of-registered devices
  i2c: designware: Add Intel Baytrail PMIC I2C bus support
  i2c: designware: Add i2c bus locking support
  of: i2c: Add i2c-mux-idle-disconnect DT property to PCA954x mux driver
  i2c: designware: use {readl|writel}_relaxed instead of readl/writel
  i2c: designware-pci: no need to provide clk_khz
  i2c: designware-pci: remove Moorestown support
  i2c: imx: whitespace and checkpatch cleanup
  ...
2015-02-21 12:41:50 -08:00
Linus Torvalds
18a8d49973 The clock framework changes for 3.20 contain the usual driver additions,
enhancements and fixes mostly for ARM32, ARM64, MIPS and Power-based
 devices. Additionaly the framework core underwent a bit of surgery with
 two major changes. The boundary between the clock core and clock
 providers (e.g clock drivers) is now more well defined with dedicated
 provider helper functions. struct clk no longer maps 1:1 with the
 hardware clock but is a true per-user cookie which helps us tracker
 users of hardware clocks and debug bad behavior. The second major change
 is the addition of rate constraints for clocks. Rate ranges are now
 supported which are analogous to the voltage ranges in the regulator
 framework. Unfortunately these changes to the core created some
 breakeage. We think we fixed it all up but for this reason there are
 lots of last minute commits trying to undo the damage.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU54D5AAoJEDqPOy9afJhJs6AQAK5YuUwjDchdpNZx9p7OnT1q
 +poehuUwE/gYjmdACqYFyaPrI/9f43iNCfFAgKGLQqmB5ZK4sm4ktzfBEhjWINR2
 iiCx9QYMQVGiKwC8KU0ddeBciglE2b/DwxB45m9TsJEjowucUeBzwLEIj5DsGxf7
 teXRoOWgXdz1MkQJ4pnA09Q3qEPQgmu8prhMfka/v75/yn7nb9VWiJ6seR2GqTKY
 sIKL9WbKjN4AzctggdqHnMSIqZoq6vew850bv2C1fPn7GiYFQfWW+jvMlVY40dp8
 nNa2ixSQSIXVw4fCtZhTIZcIvZ8puc7WVLcl8fz3mUe3VJn1VaGs0E+Yd3GexpIV
 7bwkTOIdS8gSRlsUaIPiMnUob5TUMmMqjF4KIh/AhP4dYrmVbU7Ie8ccvSxe31Ku
 lK7ww6BFv3KweTnW/58856ZXDlXLC6x3KT+Fw58L23VhPToFgYOdTxn8AVtE/LKP
 YR3UnY9BqFx6WHXVoNvg3Piyej7RH8fYmE9om8tyWc/Ab8Eo501SHs9l3b2J8snf
 w/5STd2CYxyKf1/9JLGnBvGo754O9NvdzBttRlygB14gCCtS/SDk/ELG2Ae+/a9P
 YgRk2+257h8PMD3qlp94dLidEZN4kYxP/J6oj0t1/TIkERWfZjzkg5tKn3/hEcU9
 qM97ZBTplTm6FM+Dt/Vk
 =zCVK
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus-3.20' of git://git.linaro.org/people/mike.turquette/linux

Pull clock framework updates from Mike Turquette:
 "The clock framework changes contain the usual driver additions,
  enhancements and fixes mostly for ARM32, ARM64, MIPS and Power-based
  devices.

  Additionally the framework core underwent a bit of surgery with two
  major changes:

   - The boundary between the clock core and clock providers (e.g clock
     drivers) is now more well defined with dedicated provider helper
     functions.  struct clk no longer maps 1:1 with the hardware clock
     but is a true per-user cookie which helps us tracker users of
     hardware clocks and debug bad behavior.

   - The addition of rate constraints for clocks.  Rate ranges are now
     supported which are analogous to the voltage ranges in the
     regulator framework.

  Unfortunately these changes to the core created some breakeage.  We
  think we fixed it all up but for this reason there are lots of last
  minute commits trying to undo the damage"

* tag 'clk-for-linus-3.20' of git://git.linaro.org/people/mike.turquette/linux: (113 commits)
  clk: Only recalculate the rate if needed
  Revert "clk: mxs: Fix invalid 32-bit access to frac registers"
  clk: qoriq: Add support for the platform PLL
  powerpc/corenet: Enable CLK_QORIQ
  clk: Replace explicit clk assignment with __clk_hw_set_clk
  clk: Add __clk_hw_set_clk helper function
  clk: Don't dereference parent clock if is NULL
  MIPS: Alchemy: Remove bogus args from alchemy_clk_fgcs_detr
  clkdev: Always allocate a struct clk and call __clk_get() w/ CCF
  clk: shmobile: div6: Avoid division by zero in .round_rate()
  clk: mxs: Fix invalid 32-bit access to frac registers
  clk: omap: compile legacy omap3 clocks conditionally
  clkdev: Export clk_register_clkdev
  clk: Add rate constraints to clocks
  clk: remove clk-private.h
  pci: xgene: do not use clk-private.h
  arm: omap2+ remove dead clock code
  clk: Make clk API return per-user struct clk instances
  clk: tegra: Define PLLD_DSI and remove dsia(b)_mux
  clk: tegra: Add support for the Tegra132 CAR IP block
  ...
2015-02-21 12:30:30 -08:00
Linus Torvalds
c189cb8ef6 VFIO updates for v3.20-rc1
- IOMMU updates based on trace analysis (Alex Williamson)
  - VFIO device request interface (Alex Williamson)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU505RAAoJECObm247sIsinr0QAKkWi7UzlkAUECh4IIbACFBC
 2K21aeBJiLVVFl+fRa8lZY/vXcbitL+AFSdpd7ueD2LdAzopt7HSfhb2Av4cDBF4
 1zc9mN5viqNVGHXguvoXbfi7y0vlQxI28h4AErX0RWcPmHh/mXzwXKCjlaX+DY8S
 IKfc6oacmizIMP4A+rbqwnL34WW9NuKLh46aFL6uaWLPO9S4NTQAfiL3cucOyM7W
 NJ1hwsv9Nl6Bc1rdfReK/UeM4gklCh1CKYmZP6Og4txyVqSdfXIpqlEBKPnkqIyQ
 D6pc3N0rNIDH3HBU5UmOA9SY7SExIVFucyS+FQjVrB40RL9qU0hfvAqfzpQ19CiD
 GBtuARamqUxLghwhu5pSlE2EWjgFUhKDs+VIyXtN+ZXoXXsIX2cQiuEv0yXi8q3j
 vI31qdYTZ+exPVAfuV0VuEEklPqq+DVL2/ChK7mfsCaS9nMnqmtLABn7JgZqwBqo
 r/lqSLCG9ReHbsxF6JriyAOymLzvHoo/m+BEJ48oqh1AhkyrSs8vRDEr5VUqMmqK
 d3lfXCh3rxeq4FuVORzL7K5g67xQkFueBBbf3l0yF+Qd7RCDxOSH2v5tk3VP+Bjk
 GHmEBUAKB/JYq1TugydhBXiO6ri2O+BvL08khQvaYHpa5qUfr1ECzCydVCVBmd6G
 3hCFdpesIdYzeo7vlUlf
 =8+p0
 -----END PGP SIGNATURE-----

Merge tag 'vfio-v3.20-rc1' of git://github.com/awilliam/linux-vfio

Pull VFIO updates from Alex Williamson:

 - IOMMU updates based on trace analysis
 - VFIO device request interface

* tag 'vfio-v3.20-rc1' of git://github.com/awilliam/linux-vfio:
  vfio-pci: Add device request interface
  vfio-pci: Generalize setup of simple eventfds
  vfio: Add and use device request op for vfio bus drivers
  vfio: Tie IOMMU group reference to vfio group
  vfio: Add device tracking during unbind
  vfio/type1: Add conditional rescheduling
  vfio/type1: Chunk contiguous reserved/invalid page mappings
  vfio/type1: DMA unmap chunking
2015-02-21 11:55:21 -08:00
Linus Torvalds
f5e25f0db0 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management fix from Zhang Rui:
 "One patch to fix a problem that all Exynos SoCs will break at boot
  time"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal: exynos: fix: Check if data->tmu_read callback is present before read
2015-02-21 11:50:42 -08:00
Linus Torvalds
f9677375b0 Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull Intel Quark SoC support from Ingo Molnar:
 "This adds support for Intel Quark X1000 SoC boards, used in the low
  power 32-bit x86 Intel Galileo microcontroller board intended for the
  Arduino space.

  There's been some preparatory core x86 patches for Quark CPU quirks
  merged already, but this rounds it all up and adds Kconfig enablement.
  It's a clean hardware enablement addition tree at this point"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/intel/quark: Fix simple_return.cocci warnings
  x86/intel/quark: Fix ptr_ret.cocci warnings
  x86/intel/quark: Add Intel Quark platform support
  x86/intel/quark: Add Isolated Memory Regions for Quark X1000
2015-02-21 11:12:07 -08:00
Linus Torvalds
5fbe4c224c Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
 "This contains:

   - EFI fixes
   - a boot printout fix
   - ASLR/kASLR fixes
   - intel microcode driver fixes
   - other misc fixes

  Most of the linecount comes from an EFI revert"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/ASLR: Avoid PAGE_SIZE redefinition for UML subarch
  x86/microcode/intel: Handle truncated microcode images more robustly
  x86/microcode/intel: Guard against stack overflow in the loader
  x86, mm/ASLR: Fix stack randomization on 64-bit systems
  x86/mm/init: Fix incorrect page size in init_memory_mapping() printks
  x86/mm/ASLR: Propagate base load address calculation
  Documentation/x86: Fix path in zero-page.txt
  x86/apic: Fix the devicetree build in certain configs
  Revert "efi/libstub: Call get_memory_map() to obtain map and desc sizes"
  x86/efi: Avoid triple faults during EFI mixed mode calls
2015-02-21 10:41:29 -08:00