There are only very few filesystems using generic metadata buffer head
tracking and everybody is paying the overhead. When we remove this
tracking for inode reclaim code .evict will start to see inodes with
metadata buffers attached so write them out and prune them.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260326095354.16340-60-jack@suse.cz
Tested-by: syzbot@syzkaller.appspotmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
There are only very few filesystems using generic metadata buffer head
tracking and everybody is paying the overhead. When we remove this
tracking for inode reclaim code .evict will start to see inodes with
metadata buffers attached so write them out and prune them.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260326095354.16340-59-jack@suse.cz
Tested-by: syzbot@syzkaller.appspotmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
There are only very few filesystems using generic metadata buffer head
tracking and everybody is paying the overhead. When we remove this
tracking for inode reclaim code .evict will start to see inodes with
metadata buffers attached so write them out and prune them.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260326095354.16340-58-jack@suse.cz
Tested-by: syzbot@syzkaller.appspotmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
There are only very few filesystems using generic metadata buffer head
tracking and everybody is paying the overhead. When we remove this
tracking for inode reclaim code .evict will start to see inodes with
metadata buffers attached so write them out and prune them.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260326095354.16340-57-jack@suse.cz
Tested-by: syzbot@syzkaller.appspotmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
The implementation is now really basic so rename generic_file_fsync()
simple_fsync() and __generic_file_fsync() to simple_fsync_noflush().
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260326095354.16340-56-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
No filesystem calling __generic_file_fsync() uses metadata bh tracking.
Drop sync_mapping_buffers() call from __generic_file_fsync() as it's
pointless now which untangles buffer head handling from fs/libfs.c.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260326095354.16340-55-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
FAT uses a list of metadata bhs attached to an inode. Switch it to use
generic_buffers_fsync_noflush() instead of __generic_file_fsync() as
we'll be removing metadata bh handling from __generic_file_fsync().
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260326095354.16340-54-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
BFS uses list of metadata bhs attached to an inode. Switch it to use
generic_buffers_fsync() instead of generic_file_fsync() as we'll be
removing metadata bh handling from generic_file_fsync().
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260326095354.16340-53-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
Minix uses list of metadata bhs attached to an inode. Switch it to
generic_buffers_fsync() instead of generic_file_fsync() as we'll be
removing metadata bh handling from generic_file_fsync().
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260326095354.16340-52-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
UDF uses metadata bh list attached to inode. Switch it to
generic_buffers_fsync() instead of generic_file_fsync() as we'll be
removing metadata bh handling from generic_file_fsync().
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260326095354.16340-51-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
Inode lock in __generic_file_fsync() protects sync_mapping_buffers() and
sync_inode_metadata() calls. Neither sync_mapping_buffers() nor
sync_inode_metadata() themselves need the protection by inode_lock and
both metadata buffer head writeback and inode writeback can happen
without inode lock (either in case of background writeback or sync(2)
calls). The only protection inode_lock can possibly provide is that
write(2) or other inode modifying calls cannot happen in the middle of
bh+inode writeout and thus result in writeout of inconsistent metadata.
However if writes and fsyncs race, background writeback can submit
inconsistent metadata just after fsync completed even with inode_lock
protecting fsync so this seems moot as well. So let's remove the
apparently pointless inode_lock protection.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260326095354.16340-50-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
EXFAT never calls mark_buffer_dirty_inode() and thus
invalidate_inode_buffers() never has anything to evict. Drop the
pointless call.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260326095354.16340-49-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
UFS doesn't call mark_buffer_dirty_inode() and thus
invalidate_mapping_buffers() never has anything to drop. Remove the
pointless call.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260326095354.16340-48-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
Nobody is calling mark_buffer_dirty_inode() with internal bdev inode and
it doesn't make sense for internal bdev inode to have any metadata
buffer heads. Just drop the pointless invalidate_inode_buffers() call
and consequently the whole bdev_evict_inode() because generic code takes
care of the rest.
CC: linux-block@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260326095354.16340-47-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
ocfs2 never calls mark_buffer_dirty_inode() and thus its metadata
buffers list is always empty. Drop the pointless sync_mapping_buffers()
calls.
CC: Joel Becker <jlbec@evilplan.org>
CC: Joseph Qi <joseph.qi@linux.alibaba.com>
CC: ocfs2-devel@lists.linux.dev
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260326095354.16340-46-jack@suse.cz
Tested-by: syzbot@syzkaller.appspotmail.com
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
ntfs3 never calls mark_buffer_dirty_inode() and thus its metadata
buffers list is always empty. Drop the pointless sync_mapping_buffers()
and invalidate_inode_buffers() calls.
CC: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
CC: ntfs3@lists.linux.dev
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260326095354.16340-45-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
Replace ioremap() with devm_ioremap() so the mapping is released
automatically when the device is unbound. Remove the corresponding
iounmap() calls from the error path in mpc5200_audio_dma_create() and
from mpc5200_audio_dma_destroy().
Since devm_ioremap() failure already returns directly and no other
cleanup is needed at that point, simplify the kzalloc error path to
return -ENOMEM directly instead of jumping to the now-removed out_unmap
label.
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://patch.msgid.link/20260324224530.102164-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The kernel test robot reported that on hexagon with clang, several test
functions in fat_test.c exceed the 1280-byte stack frame limit.
The root cause is the compound literal assignment in
fat_test_set_time_offset():
*sbi = (struct msdos_sb_info){};
struct msdos_sb_info contains two hash tables of 256 hlist_head entries
(FAT_HASH_SIZE), making it several kilobytes. The compound literal
creates a temporary on the stack, and when clang inlines
fat_test_set_time_offset() into each test function, the large temporary
inflates every caller's stack frame beyond the limit.
Replace the compound literal with memset() which zeroes the struct
in-place without a stack temporary.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603251755.4UYY1Rcd-lkp@intel.com/
Signed-off-by: Christian Brauner <brauner@kernel.org>
The i.MX93 uses a newer version of the DW CSI-2 controller with a changed
register layout and an integrated Image Pixel Interface (IPI), which
converts the received CSI-2 packets from byte to pixel format and produces
a pixel data bus containing vertical and horizontal synchronization
information.
The reset flow also differs, so add the .assert_reset(), .deassert_reset(),
and .idi_enable() callbacks to support it.
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[Sakari Ailus: include missing linux/bitfield.h.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The i.MX93 uses the DW CSI-2 RX controller, which is similar to the
Rockchip RK3568 implementation.
The i.MX93 variant provides one IRQ, two clocks, and no resets. Add the
"fsl,imx93-mipi-csi2" compatible string and keep the same constraints for
RK3568.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Use enum dw_mipi_csi2rx_regs_index together with a u32 array to describe
register offsets. This allows supporting new IP versions with different
register layouts in a structured way.
Add rk3568_regs matching the previous macro definitions and pass it as
driver data during probe.
No functional change intended.
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Implement the .get_frame_desc() callback to fetch information from the
remote endpoint.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
devm_clk_bulk_get_all() returns all clocks described in the DT, which are
already validated by the binding. Do not need enforce an expected clock
count.
Only check for error returns (< 0) to support more SoCs.
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The DW MIPI CSI-2 RX is used on different SoCs, not all of which provide a
reset controller. Switch to devm_reset_control_get_optional_exclusive()
to support such platforms.
Reset presence and numbering are validated by the DT binding.
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add support for selecting between continuous and non-continuous MIPI clock
mode.
Previously, the CSI-2 non-continuous clock endpoint flag was ignored and
the sensor was always configured for non-continuous clock mode. For
existing device tree nodes that do not have this property enabled, this
update will therefore change the actual clock mode.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The sensor supports an input clock in the range of 6 to 27 MHz. Currently,
the driver only supports a 19.2 MHz clock. Extend the driver so that at
least 24 MHz, which is a typical frequency for this sensor, can also be
used.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add support for the required power supplies as well as the control of an
optional sensor reset.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The OV08D10 can be used also on embedded designs using device tree so allow
the sensor to bind to a device tree node.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add bindings for the Omnivision OV08D10 CMOS image sensor.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add trailing \n to dev_* prints where missing.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Fix some spelling errors in comments.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Register P1:0x33 is written twice with the same value in the
'lane_2_mode_1632x1224' sequence. Remove one unnecessary write access.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The current settings for the "image vertical start" register appear to be
incorrect. While this only results in an incorrect start line for native
modes, this faulty setting causes actual problems in binning mode. At least
on an i.MX8MP test system, only corrupted frames could be received.
To correct this, the recommended settings from the reference register sets
are used for all modes. Since this shifts the start by one line, the Bayer
pattern also changes, which has also been corrected.
Fixes: 7be91e02ed ("media: i2c: Add ov08d10 camera sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Set the device's runtime PM status and enable runtime PM before registering
the async sub-device. This is needed to avoid the case where the device is
runtime PM resumed while runtime PM has not been enabled yet.
Remove the related, non-driver-specific comment while at it.
Fixes: 7be91e02ed ("media: i2c: Add ov08d10 camera sensor driver")
Cc: stable@vger.kernel.org
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Remove cleanup of the register definitions from the TODO file.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The xfile/xmbuf shmem file descriptions are no longer as detailed as
they were when online fsck was first merged, because moving to static
strings in commit 60382993a2 ("xfs: get rid of the
xchk_xfile_*_descr calls") removed a memory allocation and hence a
source of failure.
However this makes encoding the description in the tracepoints sort of a
waste of memory. David Laight also points out that file_path doesn't
zero the whole buffer which causes exposure of stale trace bytes, and
Steven Rostedt wonders why we're not using a dynamic array for the file
path.
I don't think this is worth fixing, so let's just rip it out.
Cc: rostedt@goodmis.org
Cc: david.laight.linux@gmail.com
Link: https://lore.kernel.org/linux-xfs/20260323172204.work.979-kees@kernel.org/
Cc: stable@vger.kernel.org # v6.11
Fixes: 19ebc8f84e ("xfs: fix file_path handling in tracepoints")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xlog_recovery_iget* never set @ip to a valid pointer if they return
an error, so this irele will walk off a dangling pointer. Fix that.
Cc: stable@vger.kernel.org # v6.10
Fixes: ae673f534a ("xfs: record inode generation in xattr update log intent items")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The DU driver creates device_link instances between the DU and CMMs, but
never deletes them. Fix it by introducing a rcar_du_cmm structure to
group the CMM device and device_link, and deleting the links at cleanup
time.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260323164526.2292491-5-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The DU driver stores the CMM devices as pointers to struct
platform_device, and passes them to the API exposed by the CMM driver.
This is similar to how the VSP is handled, except that the VSP uses
struct device pointers. Replace the CMM platform_device pointers with
device pointers for consistency.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260323164526.2292491-3-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The VSP serves as an interface to memory and a compositor to the DU. It
therefore needs to be suspended after and resumed before the DU, to be
properly stopped and restarted in a controlled fashion driven by the DU
driver. This currently works by chance. Avoid relying on luck by
enforcing the correct suspend/resume ordering with device links.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/20260323164526.2292491-2-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
When displaying pending SQEs for a MIXED ring, each 128-byte SQE
increments sq_head to skip the second slot, but the loop counter is not
adjusted. This can cause the loop to read past sq_tail by one entry for
each 128-byte SQE encountered, displaying SQEs that haven't been made
consumable yet by the application.
Match the kernel's own consumption logic in io_init_req() which
decrements what's left when consuming the extra slot.
Fixes: 1cba30bf9f ("io_uring: add support for IORING_SETUP_SQE_MIXED")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 6bee098b91.
Den 2026-03-25 kl. 22:11, skrev Simona Vetter:
> On Wed, Mar 25, 2026 at 10:26:40AM -0700, Guenter Roeck wrote:
>> Hi,
>>
>> On Fri, Mar 13, 2026 at 04:17:27PM +0100, Maarten Lankhorst wrote:
>>> When trying to do a rather aggressive test of igt's "xe_module_load
>>> --r reload" with a full desktop environment and game running I noticed
>>> a few OOPSes when dereferencing freed pointers, related to
>>> framebuffers and property blobs after the compositor exits.
>>>
>>> Solve this by guarding the freeing in drm_file with drm_dev_enter/exit,
>>> and immediately put the references from struct drm_file objects during
>>> drm_dev_unplug().
>>>
>>
>> With this patch in v6.18.20, I get the warning backtraces below.
>> The backtraces are gone with the patch reverted.
>
> Yeah, this needs to be reverted, reasoning below. Maarten, can you please
> take care of that and feed the revert through the usual channels? I don't
> think it's critical enough that we need to fast-track this into drm.git
> directly.
>
> Quoting the patch here again:
>
>> drivers/gpu/drm/drm_file.c | 5 ++++-
>> drivers/gpu/drm/drm_mode_config.c | 9 ++++++---
>> 2 files changed, 10 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/drm_file.c b/drivers/gpu/drm/drm_file.c
>> index ec820686b3021..f52141f842a1f 100644
>> --- a/drivers/gpu/drm/drm_file.c
>> +++ b/drivers/gpu/drm/drm_file.c
>> @@ -233,6 +233,7 @@ static void drm_events_release(struct drm_file *file_priv)
>> void drm_file_free(struct drm_file *file)
>> {
>> struct drm_device *dev;
>> + int idx;
>>
>> if (!file)
>> return;
>> @@ -249,9 +250,11 @@ void drm_file_free(struct drm_file *file)
>>
>> drm_events_release(file);
>>
>> - if (drm_core_check_feature(dev, DRIVER_MODESET)) {
>> + if (drm_core_check_feature(dev, DRIVER_MODESET) &&
>> + drm_dev_enter(dev, &idx)) {
>
> This is misplaced for two reasons:
>
> - Even if we'd want to guarantee that we hold a drm_dev_enter/exit
> reference during framebuffer teardown, we'd need to do this
> _consistently over all callsites. Not ad-hoc in just one place that a
> testcase hits. This also means kerneldoc updates of the relevant hooks
> and at least a bunch of acks from other driver people to document the
> consensus.
>
> - More importantly, this is driver responsibilities in general unless we
> have extremely good reasons to the contrary. Which means this must be
> placed in xe.
>
>> drm_fb_release(file);
>> drm_property_destroy_user_blobs(dev, file);
>> + drm_dev_exit(idx);
>> }
>>
>> if (drm_core_check_feature(dev, DRIVER_SYNCOBJ))
>> diff --git a/drivers/gpu/drm/drm_mode_config.c b/drivers/gpu/drm/drm_mode_config.c
>> index 84ae8a23a3678..e349418978f79 100644
>> --- a/drivers/gpu/drm/drm_mode_config.c
>> +++ b/drivers/gpu/drm/drm_mode_config.c
>> @@ -583,10 +583,13 @@ void drm_mode_config_cleanup(struct drm_device *dev)
>> */
>> WARN_ON(!list_empty(&dev->mode_config.fb_list));
>> list_for_each_entry_safe(fb, fbt, &dev->mode_config.fb_list, head) {
>> - struct drm_printer p = drm_dbg_printer(dev, DRM_UT_KMS, "[leaked fb]");
>> + if (list_empty(&fb->filp_head) || drm_framebuffer_read_refcount(fb) > 1) {
>> + struct drm_printer p = drm_dbg_printer(dev, DRM_UT_KMS, "[leaked fb]");
>
> This is also wrong:
>
> - Firstly, it's a completely independent bug, we do not smash two bugfixes
> into one patch.
>
> - Secondly, it's again a driver bug: drm_mode_cleanup must be called when
> the last drm_device reference disappears (hence the existence of
> drmm_mode_config_init), not when the driver gets unbound. The fact that
> this shows up in a callchain from a devres cleanup means the intel
> driver gets this wrong (like almost everyone else because historically
> we didn't know better).
>
> If we don't follow this rule, then we get races with this code here
> running concurrently with drm_file fb cleanups, which just does not
> work. Review pointed that out, but then shrugged it off with a confused
> explanation:
>
> https://lore.kernel.org/all/e61e64c796ccfb17ae673331a3df4b877bf42d82.camel@linux.intel.com/
>
> Yes this also means a lot of the other drm_device teardown that drivers
> do happens way too early. There is a massive can of worms here of a
> magnitude that most likely is much, much bigger than what you can
> backport to stable kernels. Hotunplug is _hard_.
Back to the drawing board, and fixing it in the intel display driver
instead.
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: 6bee098b91 ("drm: Fix use-after-free on framebuffers and property blobs when calling drm_dev_unplug")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Link: https://patch.msgid.link/20260326082217.39941-2-dev@lankhorst.se
Much like the patch that dispatched (regular) work items, we also need to
dispatch delayed work items in order not to trigger the orphan rule. This
allows a drm::Device<T> to dispatch the delayed work to T::Data.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20260323-aref-workitem-v3-4-f59729b812aa@collabora.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
The preceding patches added support for ARef<T> work items. By the same
token, add support for delayed work items too.
The rationale is the same: it may be convenient or even necessary at times
to implement HasDelayedWork directly on ARef<T>. A follow up patch will
also implement support for drm::Device as the first user.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20260323-aref-workitem-v3-3-f59729b812aa@collabora.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
This implementation dispatches any work enqueued on ARef<drm::Device<T>> to
its driver-provided handler. It does so by building upon the newly-added
ARef<T> support in workqueue.rs in order to call into the driver
implementations for work_container_of and raw_get_work.
This is notably important for work items that need access to the drm
device, as it was not possible to enqueue work on a ARef<drm::Device<T>>
previously without failing the orphan rule.
The current implementation needs T::Data to live inline with drm::Device in
order for work_container_of to function. This restriction is already
captured by the trait bounds. Drivers that need to share their ownership of
T::Data may trivially get around this:
// Lives inline in drm::Device
struct DataWrapper {
work: ...,
// Heap-allocated, shared ownership.
data: Arc<DriverData>,
}
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20260323-aref-workitem-v3-2-f59729b812aa@collabora.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>