Currently the slot width in non-TDM mode is always kept at the POR value
of 32 bits, regardless of the sample width, which doesn't work well for
some codecs such as NAU8822.
Set the slot width according to the sample width in non-TDM mode, which
is what other CPU DAI drivers do.
Tested on the following RK3576 configurations:
- SAI2 + NAU8822 (codec as the clock master), custom board
- SAI1 + ES8388 (codec as the clock master), RK3576 EVB1
- SAI2 + RT5616 (SAI as the clock master), FriendlyElec NanoPi M5
NAU8822 didn't work prior to this patch but works after the patch. Other
two configurations work both before and after the patch.
Fixes: cc78d1eaab ("ASoC: rockchip: add Serial Audio Interface (SAI) driver")
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20260318-sai-slot-width-v1-1-1f68186f71e3@flipper.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert rockchip-max98090.txt to yaml to allow dt-schema validation.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260324135508.839142-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because the HDP peripheral both depends on debug and firewall
configuration, when CONFIG_STM32_FIREWALL is present, use the
stm32 firewall framework to be able to check these configuration against
the relevant controllers.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Clément Le Goffic <legoffic.clement@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://lore.kernel.org/r/20260226-debug_bus-v6-12-5d794697798d@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add the stm32 debug bus driver that is responsible of checking the
debug subsystem accessibility before probing the related peripheral
drivers.
This driver is OP-TEE dependent and relies on the STM32 debug access
PTA.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Link: https://lore.kernel.org/r/20260226-debug_bus-v6-6-5d794697798d@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add the stm32_firewall_get_grant_all_access() API to be able to fetch
all firewall references in an access-controllers property and try to grant
access to all of them.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://lore.kernel.org/r/20260226-debug_bus-v6-5-5d794697798d@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Current implementation restricts the check on the firewall controller
being the bus parent. Change this by using the controller referenced
in each firewall queries.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Link: https://lore.kernel.org/r/20260226-debug_bus-v6-4-5d794697798d@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Document the stm32 debug bus. The debug bus is responsible for
checking the debug sub-system accessibility before probing any related
drivers.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260226-debug_bus-v6-3-5d794697798d@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
HDP being functional depends on the debug configuration on the platform
that can be checked using the access-controllers property, document it.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Linus Walleij <linusw@kernel.org>
Link: https://lore.kernel.org/r/20260226-debug_bus-v6-2-5d794697798d@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Document the access-controllers for coresight peripherals in case some
access checks need to be performed to use them.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260226-debug_bus-v6-1-5d794697798d@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Peripheral holding CID0 cannot be accessed, remove this completely
incorrect check. While there, fix and simplify the semaphore checking
that should be performed when the CID filtering is enabled.
Fixes: a182084572 ("bus: rifsc: introduce RIFSC firewall controller driver")
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Link: https://lore.kernel.org/r/20260129-fix_cid_check_rifsc-v1-1-ef280ccf764d@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Replace snprintf("%s", ...) with the faster and more direct strscpy().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Link: https://lore.kernel.org/r/20260223211212.344855-1-thorsten.blum@linux.dev
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Tested-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105143657.383621-5-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Other driver than RIFSC and ETZPC can implement firewall ops, such as
RCC.
In order for them to have access to the ops and type of this framework,
we need to get the `stm32_firewall.h` file in the include/ folder.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Signed-off-by: Clément Le Goffic <legoffic.clement@gmail.com>
Acked-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Link: https://lore.kernel.org/r/20260210-b4-firewall-upstream-v8-1-097c1e47af82@gmail.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Enable STMicroelectronics STM32 display support as module.
This includes:
* DRM_STM
* DRM_STM_LVDS
* BACKLIGHT_GPIO
* TOUCHSCREEN_ILI210X
This display is used on several SoCs and boards such as STM32MP257F-EV1
and STM32MP257F-DK.
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Tested-by: Yannick Fertre <yannick.fertre@foss.st.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260205-master-v1-1-dcefcabc2934@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Make the syscfg node a clock provider so clock consumers can reach child
clocks through device-tree.
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Link: https://lore.kernel.org/r/20260210-display-v2-5-0592bd514958@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add the LTDC node for stm32mp235 SoC and handle its loopback clocks.
ck_ker_ltdc has the CLK_SET_RATE_PARENT flag. While having this flag is
semantically correct, it for now leads to an improper setting of the
clock rate. The ck_ker_ltdc parent clock is the flexgen 27, which does
not support changing rates yet. To overcome this issue, a fixed clock
can be used for the kernel clock.
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Link: https://lore.kernel.org/r/20260210-display-v2-3-0592bd514958@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The LCD-TFT Display Controller (LTDC) handles display composition,
scaling and rotation. It provides a parallel digital RGB flow to be
used by display interfaces.
Add the LTDC node.
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Link: https://lore.kernel.org/r/20260210-display-v2-2-0592bd514958@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
stm32mp25-pinctrl.dtsi gathers all pinctrl groups from current and future
STM32MP25-based boards. Some groups may remain unused by any board,
resulting in wasted binary space.
Adding /omit-if-no-ref/ to the groups will remove unused groups from the
device tree blobs.
Use the following regex to update the file:
's/^\t[^:]\+: [^ ]\+ {$/\t\/omit-if-no-ref\/\n&/'
Also, merge the duplicated pinctrl_z node.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20260311-mp25_pinctrl_omit-v1-1-5a3d40046b10@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add BSEC support to STM32MP21 SoC family with SoC information:
- RPN = Device part number (BSEC_OTP_DATA9)
- PKG = package data register (Bits 2:0 of BSEC_OTP_DATA122)
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20260211-upstream_stm32mp21_bsec_nodes-v1-1-8379bf97b0bc@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add a 2nd set of i2c2 pinmux nodes (i2c2_pins_b/i2c2_sleep_pins_b)
in stm32mp25-pinctrl.dtsi in order to be used on the stm32mp257f-dk
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/20260224-stm32-i2c-dt-updates-v1-6-347cf6fca7d1@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Update all i2c nodes with the following properties:
- replace interrupts with interrupts-extended and rely on exti
- add the wakeup-source property
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/20260224-stm32-i2c-dt-updates-v1-5-347cf6fca7d1@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Update all i2c nodes with the following properties:
- replace interrupts with interrupts-extended and rely on exti
- add the wakeup-source property
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/20260224-stm32-i2c-dt-updates-v1-4-347cf6fca7d1@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Since DMA resources are limited, remove the DMA related properties
of i2c2 and i2c5 in stm32mp157c-ev1.dts.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/20260224-stm32-i2c-dt-updates-v1-3-347cf6fca7d1@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Update all i2c nodes with the following properties:
- replace interrupts with interrupts-extended and rely on exti
- add the wakeup-source property
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/20260224-stm32-i2c-dt-updates-v1-2-347cf6fca7d1@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Update all i2c nodes with the following properties:
- replace interrupts with interrupts-extended and rely on exti
- add dma properties
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/20260224-stm32-i2c-dt-updates-v1-1-347cf6fca7d1@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The following DTOs are supported on STM32MP15xx DHCOM PDK2:
- DH 460-200 SRAM board in header X11
- DH 497-200 adapter card with EDT ETM0700G0EDH6 Parallel RGB panel
- DH 505-200 adapter card with Chefree CH101OLHLWH-002 LVDS panel
- DH 531-100 SPI/I2C board in header X21
- DH 531-200 SPI/I2C board in header X22
- DH 560-200 7" LCD board in header X12
- DH 638-100 mezzanine card with RPi 7" DSI panel attached on top
- DH 672-100 expansion card, which contains CAN/FD transceiver and
enables PDK2 to use one more CAN/FD interface
The following DTOs are supported on STM32MP15xx DHCOM DRC02:
- Enable configuration where the DHSOM inserted into the DRC02 has
RSI 9116 WiFi populated on the SoM and where the microSD slot on
the bottom of DRC02 must not be used.
This permits a non-default configuration of the SoM and DRC02 board
used for custom device setup with on-SoM WiFi.
The following DTOs are supported on STM32MP15xx DHCOM PicoITX:
- DH 548-200 adapter card with Multi-Inno MI0700D4T-6 7" DPI panel
- DH 553-100 adapter card with Team Source Display TST043015CMHX 4.3" DPI panel
- DH 626-100 adapter card with Chefree CH101OLHLWH-002 LVDS panel
The following DTOs are supported on STM32MP15xx DHCOR Avenger96:
- FDCAN1 on low-speed expansion X6
- FDCAN2 on low-speed expansion X6
- AT24C04 I2C EEPROM on low-speed expansion X6 I2C1
- AT24C04 I2C EEPROM on low-speed expansion X6 I2C2
- AT25AA010A SPI EEPROM on low-speed expansion X6 SPI2
- 96boards OV5640 mezzanine card with sensor connected to port J3.
- DH 644-100 mezzanine card with Orisetech OTM8009A DSI panel
- DH 644-100 mezzanine card with RPi 7" DSI panel
The following DTOs are supported on STM32MP13xx DHCOR DHSBC:
- joy-IT RB-TFT3.2-V2 240x320 SPI LCD and XPT2046 resistive touch controller
Signed-off-by: Marek Vasut <marex@nabladev.com>
Link: https://lore.kernel.org/r/20260121085347.10368-3-marex@nabladev.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Enable CoreSight peripherals on the stm32mp15xx-dkx boards. All boards
including this file are embedding a dual core SoC so this change is
applicable.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Link: https://lore.kernel.org/r/20260226-debug_bus-v6-9-5d794697798d@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
On stm32mp1x boards, enable the debug bus so we always try to probe
the debug peripherals, if their status and the debug configuration
allow it.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Link: https://lore.kernel.org/r/20260226-debug_bus-v6-8-5d794697798d@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Some peripherals cannot be probed if a debug configuration is not set
in the BSEC.
Introduce a debug bus that will check the debug subsystem accessibility
before probing these peripheral drivers.
Add Coresight peripheral nodes under this bus and add the appropriate
access-controllers property to the HDP node.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Link: https://lore.kernel.org/r/20260226-debug_bus-v6-7-5d794697798d@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Fix a typo in the ADXL380_PART_ID_REG macro name where it was
incorrectly defined as ADLX380_PART_ID_REG.
Also update its usage in adxl380_setup().
Signed-off-by: Nikhil Gautam <nikhilgtr@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The BeagleV Ahead board includes a micro HDMI connector (Type-D)
wired to the TH1520 SoC's HDMI transmitter.
Enable the display pipeline by adding the HDMI connector node,
connecting it to the HDMI controller, and activating the DPU
and HDMI nodes.
Signed-off-by: Robert Mazur <robert.mazur@imgtec.com>
Signed-off-by: Drew Fustini <fustini@kernel.org>
The driver uses its own definitions for HID requests.
This leads to duplication and obfuscation. Use HID's
definitions.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260325143256.371854-2-oneukum@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver uses its own definitions for HID requests.
This leads to duplication and obfuscation. Use HID's
definitions.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260325143256.371854-1-oneukum@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Without a reported resolution, userspace was assuming 1 unit/mm which
is wildly wrong: a regular smartphone is clearly not 2.4 meters tall.
Most applications do not care much for this kind of raw mm value,
but Phosh's on-screen keyboard would accidentally trigger swipe-to-close
gestures due to misinterpreting small movements as huge ones.
Do what the older goodix.c driver does and set the resolution to 10
units/mm to make sure the numbers calculated by userspace are reasonable.
Signed-off-by: Val Packett <val@packett.cool>
Link: https://patch.msgid.link/20260321073242.556253-1-val@packett.cool
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tiny SRCU's srcu_gp_start_if_needed() directly calls schedule_work(),
which acquires the workqueue pool->lock.
This causes a lockdep splat when call_srcu() is called with a scheduler
lock held, due to:
call_srcu() [holding pi_lock]
srcu_gp_start_if_needed()
schedule_work() -> pool->lock
workqueue_init() / create_worker() [holding pool->lock]
wake_up_process() -> try_to_wake_up() -> pi_lock
Also add irq_work_sync() to cleanup_srcu_struct() to prevent a
use-after-free if a queued irq_work fires after cleanup begins.
Tested with rcutorture SRCU-T and no lockdep warnings.
[ Thanks to Boqun for similar fix in patch "rcu: Use an intermediate irq_work
to start process_srcu()" ]
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Since commit c27cea4416 ("rcu: Re-implement RCU Tasks Trace in terms
of SRCU-fast") we switched to SRCU in BPF. However as BPF instrument can
happen basically everywhere (including where a scheduler lock is held),
call_srcu() now needs to avoid acquiring scheduler lock because
otherwise it could cause deadlock [1]. Fix this by following what the
previous RCU Tasks Trace did: using an irq_work to delay the queuing of
the work to start process_srcu().
[boqun: Apply Joel's feedback]
[boqun: Apply Andrea's test feedback]
Reported-by: Andrea Righi <arighi@nvidia.com>
Closes: https://lore.kernel.org/all/abjzvz_tL_siV17s@gpd4/
Fixes: commit c27cea4416 ("rcu: Re-implement RCU Tasks Trace in terms of SRCU-fast")
Link: https://lore.kernel.org/rcu/3c4c5a29-24ea-492d-aeee-e0d9605b4183@nvidia.com/ [1]
Suggested-by: Zqiang <qiang.zhang@linux.dev>
Tested-by: Andrea Righi <arighi@nvidia.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
When the srcutree.convert_to_big and srcutree.big_cpu_lim kernel boot
parameters specify initialization-time allocation of the srcu_node
tree for statically allocated srcu_struct structures (for example, in
DEFINE_SRCU() at build time instead of init_srcu_struct() at runtime),
init_srcu_struct_nodes() will attempt to dynamically allocate this tree
at the first run-time update-side use of this srcu_struct structure,
but while holding a raw spinlock. Because the memory allocator can
acquire non-raw spinlocks, this can result in lockdep splats.
This commit therefore uses the same SRCU_SIZE_ALLOC trick that is used
when the first run-time update-side use of this srcu_struct structure
happens before srcu_init() is called. The actual allocation then takes
place from workqueue context at the ends of upcoming SRCU grace periods.
[boqun: Adjust the sha1 of the Fixes tag]
Fixes: 175b45ed34 ("srcu: Use raw spinlocks so call_srcu() can be used under preempt_disable()")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun@kernel.org>