Add DisplayPort controller for Qualcomm Eliza SoC fully compatible with
SM8650. The device looks very similar to SM8750 (same DP TX block
v1.5.1) but with a differences in DP PHY: Eliza and SM8650 use DP PHY
4nm v7.0, SM8750 uses 3nm v8.0.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/708864/
Link: https://lore.kernel.org/r/20260304-drm-display-eliza-v2-1-ea0579f62358@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
To the best of my knowledge, the v1 version of this SoC had been
superseded before any device was released on the market. Everywhere
else in the kernel, there are assumptions about the SoC being revision
2 or the later MSM8974PRO.
Remove the config for that flavor of MDP. To bring the naming in line
with the rest of the kernel, remove the v2 suffix from the remaining
config.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/708112/
Link: https://lore.kernel.org/r/20260302-topic-goodnight_8974v1-v1-1-e0006f7a0526@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The drm/msm module bundles several drivers, each of them having a
separate OF match table, however only MDSS (subsystem), KMS devices and
GPU have corresponding MODULE_DEVICE_ID tables.
Add MODULE_DEVICE_ID to the display-related driver and to all other
drivers in this module, simplifying userspace job.
Fixes: 060530f1ea ("drm/msm: use componentised device support")
Reported-by: Loïc Minier <loic.minier@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/707960/
Link: https://lore.kernel.org/r/20260228-msm-device-id-v2-1-24b085919444@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Turn on the switch and use virtual planes by default, enhancing
utilisation of the display pipelines. It is still possible to use legacy
implementation by using `msm.dpu_use_virtual_planes=false` kernel boot
parameter.
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Val Packett <val@packett.cool> # x1e80100-dell-latitude-7455,
Patchwork: https://patchwork.freedesktop.org/patch/707437/
Link: https://lore.kernel.org/r/20260226-dpu-enable-virt-planes-v2-1-87971236fe86@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Move the CNP PCH clock gating programming into
intel_pch_init_clock_gating() and switch the corresponding
CFL/CML caller to the display-specific code.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260324080441.154609-5-luciano.coelho@intel.com
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Move the LPT PCH clock gating programming into
intel_pch_init_clock_gating() and switch the corresponding
Haswell/Broadwell callers to the display-specific code.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260324080441.154609-4-luciano.coelho@intel.com
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Move the CPT PCH clock gating programming into
intel_pch_init_clock_gating() and switch the corresponding IVB callers
to the display-specific code.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260324080441.154609-3-luciano.coelho@intel.com
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Add a new function in the display code to help initialize clock-gating
without reading display PCH registers directly from non-display code.
This adds a mini-framework to deal with display-specific PCH registers
and uses it for IBX as a start.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260324080441.154609-2-luciano.coelho@intel.com
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
EcoNet EN751221 clock/reset driver is significantly similar to the
EN7523 / EN7581, however the EN751221 does not have a neat batch of clock
divider registers so there are fewer known clocks, and the frequency of
each clock is derived differently. This clock driver will probably work
correctly on EN751627, EN7528, and EN7580.
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add clock and reset bindings for EN751221 as well as a "chip-scu" which is
an additional regmap that is used by the clock driver as well as others.
This split of the SCU across two register areas is the same as the Airoha
AN758x family.
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The print_scx_info() always output scx_root structure's->ops.name,
but for built with CONFIG_EXT_SUB_SCHED=y kernels, the tasks may be
attach an sub scx_sched structure. this commit therefore use the
scx_task_sched_rcu() to correctly get scx_sched structure to output
ops.name, and drop state check.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Zqiang <qiang.zhang@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
Guard notation simplifies code.
Also stop trying to check if input device is opened/in use in the
interrupt handler - the interrupt is disabled when device is closed or
suspended.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use __free(fwnode_handle) cleanup facility to ensure that references to
acquired fwnodes are dropped at appropriate times automatically.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Do not define or use iqs5xx_ihex_rec structure: the original code was
using just a couple of fields in it and instead used it to calculate
offset to record data. The data field was actually reserving space for
checksum.
Instead iterate through fields and advance pointer explicitly.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Guard notation simplifies code.
Note that callers of exc3000_vendor_data_request() always expect
response, so it was adjusted to always wait for it.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Guard notation simplifies code.
Also fix the touchscreen not being marked as suspended when noone has
opened/is using it.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Previously different architectures were using random sources of
differing strength and cost to decide the random kstack offset. A number
of architectures (loongarch, powerpc, s390, x86) were using their
timestamp counter, at whatever the frequency happened to be. Other
arches (arm64, riscv) were using entropy from the crng via
get_random_u16().
There have been concerns that in some cases the timestamp counters may
be too weak, because they can be easily guessed or influenced by user
space. And get_random_u16() has been shown to be too costly for the
level of protection kstack offset randomization provides.
So let's use a common, architecture-agnostic source of entropy; a
per-cpu prng, seeded at boot-time from the crng. This has a few
benefits:
- We can remove choose_random_kstack_offset(); That was only there to
try to make the timestamp counter value a bit harder to influence
from user space [*].
- The architecture code is simplified. All it has to do now is call
add_random_kstack_offset() in the syscall path.
- The strength of the randomness can be reasoned about independently
of the architecture.
- Arches previously using get_random_u16() now have much faster
syscall paths, see below results.
[*] Additionally, this gets rid of some redundant work on s390 and x86.
Before this patch, those architectures called
choose_random_kstack_offset() under arch_exit_to_user_mode_prepare(),
which is also called for exception returns to userspace which were *not*
syscalls (e.g. regular interrupts). Getting rid of
choose_random_kstack_offset() avoids a small amount of redundant work
for the non-syscall cases.
In some configurations, add_random_kstack_offset() will now call
instrumentable code, so for a couple of arches, I have moved the call a
bit later to the first point where instrumentation is allowed. This
doesn't impact the efficacy of the mechanism.
There have been some claims that a prng may be less strong than the
timestamp counter if not regularly reseeded. But the prng has a period
of about 2^113. So as long as the prng state remains secret, it should
not be possible to guess. If the prng state can be accessed, we have
bigger problems.
Additionally, we are only consuming 6 bits to randomize the stack, so
there are only 64 possible random offsets. I assert that it would be
trivial for an attacker to brute force by repeating their attack and
waiting for the random stack offset to be the desired one. The prng
approach seems entirely proportional to this level of protection.
Performance data are provided below. The baseline is v6.18 with rndstack
on for each respective arch. (I)/(R) indicate statistically significant
improvement/regression. arm64 platform is AWS Graviton3 (m7g.metal).
x86_64 platform is AWS Sapphire Rapids (m7i.24xlarge):
+-----------------+--------------+---------------+---------------+
| Benchmark | Result Class | per-cpu-prng | per-cpu-prng |
| | | arm64 (metal) | x86_64 (VM) |
+=================+==============+===============+===============+
| syscall/getpid | mean (ns) | (I) -9.50% | (I) -17.65% |
| | p99 (ns) | (I) -59.24% | (I) -24.41% |
| | p99.9 (ns) | (I) -59.52% | (I) -28.52% |
+-----------------+--------------+---------------+---------------+
| syscall/getppid | mean (ns) | (I) -9.52% | (I) -19.24% |
| | p99 (ns) | (I) -59.25% | (I) -25.03% |
| | p99.9 (ns) | (I) -59.50% | (I) -28.17% |
+-----------------+--------------+---------------+---------------+
| syscall/invalid | mean (ns) | (I) -10.31% | (I) -18.56% |
| | p99 (ns) | (I) -60.79% | (I) -20.06% |
| | p99.9 (ns) | (I) -61.04% | (I) -25.04% |
+-----------------+--------------+---------------+---------------+
I tested an earlier version of this change on x86 bare metal and it
showed a smaller but still significant improvement. The bare metal
system wasn't available this time around so testing was done in a VM
instance. I'm guessing the cost of rdtsc is higher for VMs.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://patch.msgid.link/20260303150840.3789438-3-ryan.roberts@arm.com
Signed-off-by: Kees Cook <kees@kernel.org>
kstack_offset was previously maintained per-cpu, but this caused a
couple of issues. So let's instead make it per-task.
Issue 1: add_random_kstack_offset() and choose_random_kstack_offset()
expected and required to be called with interrupts and preemption
disabled so that it could manipulate per-cpu state. But arm64, loongarch
and risc-v are calling them with interrupts and preemption enabled. I
don't _think_ this causes any functional issues, but it's certainly
unexpected and could lead to manipulating the wrong cpu's state, which
could cause a minor performance degradation due to bouncing the cache
lines. By maintaining the state per-task those functions can safely be
called in preemptible context.
Issue 2: add_random_kstack_offset() is called before executing the
syscall and expands the stack using a previously chosen random offset.
choose_random_kstack_offset() is called after executing the syscall and
chooses and stores a new random offset for the next syscall. With
per-cpu storage for this offset, an attacker could force cpu migration
during the execution of the syscall and prevent the offset from being
updated for the original cpu such that it is predictable for the next
syscall on that cpu. By maintaining the state per-task, this problem
goes away because the per-task random offset is updated after the
syscall regardless of which cpu it is executing on.
Fixes: 39218ff4c6 ("stack: Optionally randomize kernel stack offset each syscall")
Closes: https://lore.kernel.org/all/dd8c37bc-795f-4c7a-9086-69e584d8ab24@arm.com/
Cc: stable@vger.kernel.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://patch.msgid.link/20260303150840.3789438-2-ryan.roberts@arm.com
Signed-off-by: Kees Cook <kees@kernel.org>
If auxiliary_device_add() fails, add_adev() jumps to add_fail and calls
auxiliary_device_uninit(adev).
The auxiliary device has its release callback set to adev_release(),
which frees the containing struct mana_adev. Since adev is embedded in
struct mana_adev, the subsequent fall-through to init_fail and access
to adev->id may result in a use-after-free.
Fix this by saving the allocated auxiliary device id in a local
variable before calling auxiliary_device_add(), and use that saved id
in the cleanup path after auxiliary_device_uninit().
Fixes: a69839d432 ("net: mana: Add support for auxiliary device")
Cc: stable@vger.kernel.org
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260323165730.945365-1-lgs201920130244@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
(tcp_congestion_ops)->cwnd_event() is called very often, with
@event oscillating between CA_EVENT_TX_START and other values.
This is not branch prediction friendly.
Provide a new cwnd_event_tx_start pointer dedicated for CA_EVENT_TX_START.
Both BBR and CUBIC benefit from this change, since they only care
about CA_EVENT_TX_START.
No change in kernel size:
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux
add/remove: 4/4 grow/shrink: 3/1 up/down: 564/-568 (-4)
Function old new delta
bbr_cwnd_event_tx_start - 450 +450
cubictcp_cwnd_event_tx_start - 70 +70
__pfx_cubictcp_cwnd_event_tx_start - 16 +16
__pfx_bbr_cwnd_event_tx_start - 16 +16
tcp_unregister_congestion_control 93 99 +6
tcp_update_congestion_control 518 521 +3
tcp_register_congestion_control 422 425 +3
__tcp_transmit_skb 3308 3306 -2
__pfx_cubictcp_cwnd_event 16 - -16
__pfx_bbr_cwnd_event 16 - -16
cubictcp_cwnd_event 80 - -80
bbr_cwnd_event 454 - -454
Total: Before=25240512, After=25240508, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260323234920.1097858-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The NetDrvContEnv env context uses tc clsact qdiscs and BPF tc filters
for traffic redirection, but the kernel config options are missing from
the selftests config.
Without them, the tc qdisc installation trips on:
CMD: tc qdisc add dev enp1s0 clsact
EXIT: 2
STDERR: Error: Specified qdisc kind is unknown.
net.lib.py.utils.CmdExitFailure: Command failed
Add CONFIG_NET_CLS_ACT and CONFIG_NET_SCH_INGRESS to enable these tc
options.
Fixes: 3f74d5bb80 ("selftests/net: Add env for container based tests")
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260323-config-fixes-for-nk-tests-v2-1-6c505d83e52d@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When codel_dequeue() finds an empty queue, it resets vars->dropping
but does not reset vars->first_above_time. The reference CoDel
algorithm (Nichols & Jacobson, ACM Queue 2012) resets both:
dodeque_result codel_queue_t::dodeque(time_t now) {
...
if (r.p == NULL) {
first_above_time = 0; // <-- Linux omits this
}
...
}
Note that codel_should_drop() does reset first_above_time when called
with a NULL skb, but codel_dequeue() returns early before ever calling
codel_should_drop() in the empty-queue case. The post-drop code paths
do reach codel_should_drop(NULL) and correctly reset the timer, so a
dropped packet breaks the cycle -- but the next delivered packet
re-arms first_above_time and the cycle repeats.
For sparse flows such as ICMP ping (one packet every 200ms-1s), the
first packet arms first_above_time, the flow goes empty, and the
second packet arrives after the interval has elapsed and gets dropped.
The pattern repeats, producing sustained loss on flows that are not
actually congested.
Test: veth pair, fq_codel, BQL disabled, 30000 iptables rules in the
consumer namespace (NAPI-64 cycle ~14ms, well above fq_codel's 5ms
target), ping at 5 pps under UDP flood:
Before fix: 26% ping packet loss
After fix: 0% ping packet loss
Fix by resetting first_above_time to zero in the empty-queue path
of codel_dequeue(), matching the reference algorithm.
Fixes: 76e3cc126b ("codel: Controlled Delay AQM")
Fixes: d068ca2ae2 ("codel: split into multiple files")
Co-developed-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Jonas Köppeler <j.koeppeler@tu-berlin.de>
Reported-by: Chris Arges <carges@cloudflare.com>
Tested-by: Jonas Köppeler <j.koeppeler@tu-berlin.de>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/all/20260318134826.1281205-7-hawk@kernel.org/
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260323174920.253526-1-hawk@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 6b57ff21a3 ("rtnetlink: Protect link_ops by mutex.") swapped
the EEXIST check with the init_srcu_struct, but didn't add cleanup of
the SRCU struct we just allocated in case of error.
Fixes: 6b57ff21a3 ("rtnetlink: Protect link_ops by mutex.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/e77fe499f9a58c547b33b5212b3596dad417cec6.1774025341.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver does not explicitly configure the MAC duplex mode when
bringing the link up. As a result, the MAC may retain a stale duplex
setting from a previous link state, leading to duplex mismatches with
the link partner and degraded network performance.
Update lan743x_phylink_mac_link_up() to set or clear the MAC_CR_DPX_
bit according to the negotiated duplex mode.
This ensures the MAC configuration is consistent with the phylink
resolved state.
Fixes: a5f199a8d8 ("net: lan743x: Migrate phylib to phylink")
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260323065345.144915-1-thangaraj.s@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Golle says:
====================
net: dsa: mxl862xx: MDIO bus integrity and optimization
The MxL862xx firmware offers opt-in CRC validation on the MDIO/MMD
command interface to guard against bit errors on the bus.
The driver has not used this until now.
This series enables CRC protection on both the command registers (CRC-6)
and data payloads (CRC-16), and reduces MDIO bus traffic by bulk-zeroing
registers instead of writing zero-valued words individually.
====================
Link: https://patch.msgid.link/cover.1774185953.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Issue the firmware's RST_DATA command before writing data payloads that
contain many zero words. RST_DATA zeroes both the firmware's internal
buffer and the MMD data registers in a single command, allowing the
driver to skip individual MDIO writes for zero-valued words. This
reduces bus traffic for the common case where API structs have many
unused or default-zero fields.
The optimization is applied when at least 5 zero words are found in the
payload, roughly the break-even point against the cost of the extra
RST_DATA command round-trip.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/d10bd6ad5df062d0da342c3e0d330550b3d2432b.1774185953.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable the firmware's opt-in CRC validation on the MDIO/MMD command
interface to detect bit errors on the bus. The firmware bundles CRC-6
and CRC-16 under a single enable flag, so both are implemented
together.
CRC-6 protects the ctrl and len_ret command registers using a table-
driven 3GPP algorithm. It is applied to every command exchange
including SET_DATA/GET_DATA batch transfers. With CRC enabled, the
firmware encodes its return value as a signed 11-bit integer within
the CRC- protected register fields, replacing the previous 16-bit
interpretation.
CRC-16 protects the data payload using the kernel's crc16() library.
The driver appends a CRC-16 checksum to outgoing data and verifies the
firmware-appended checksum on responses. The checksum is placed at the
exact byte offset where the struct data ends, correctly handling
packed structs with odd sizes by splitting the checksum across word
boundaries. SET_DATA/GET_DATA sub-commands carry only CRC-6.
Upon detection of a CRC error on either side all conduit interfaces
are taken down, triggering all user ports to go down as well. This is
the most feasible option: CRC errors are likely caused either by
broken hardware, or are symptom of overheating. In either case, trying
to resume normal operation isn't reasonable.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/620453b9a150bbe5b7ea4224331cb5dc5e57263b.1774185953.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>