Commit graph

79,021 commits

Author SHA1 Message Date
Gavrilov Ilia
eb434adf79 wifi: mac80211: fix integer overflow in hwmp_route_info_get()
commit d00c0c4105 upstream.

Since the new_metric and last_hop_metric variables can reach
the MAX_METRIC(0xffffffff) value, an integer overflow may occur
when multiplying them by 10/9. It can lead to incorrect behavior.

Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.

Fixes: a8d418d9ac ("mac80211: mesh: only switch path when new metric is at least 10% better")
Cc: stable@vger.kernel.org
Signed-off-by: Ilia Gavrilov <Ilia.Gavrilov@infotecs.ru>
Link: https://patch.msgid.link/20250212082124.4078236-1-Ilia.Gavrilov@infotecs.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-20 10:15:39 +02:00
Matthieu Baerts (NGI0)
91e1405088 mptcp: sockopt: fix getting freebind & transparent
commit e2f4ac7bab upstream.

When adding a socket option support in MPTCP, both the get and set parts
are supposed to be implemented.

IP(V6)_FREEBIND and IP(V6)_TRANSPARENT support for the setsockopt part
has been added a while ago, but it looks like the get part got
forgotten. It should have been present as a way to verify a setting has
been set as expected, and not to act differently from TCP or any other
socket types.

Everything was in place to expose it, just the last step was missing.
Only new code is added to cover these specific getsockopt(), that seems
safe.

Fixes: c9406a23c1 ("mptcp: sockopt: add SOL_IP freebind & transparent options")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314-net-mptcp-fix-data-stream-corr-sockopt-v1-3-122dbb249db3@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-20 10:15:38 +02:00
Matthieu Baerts (NGI0)
1b4ecd033e mptcp: sockopt: fix getting IPV6_V6ONLY
commit 8c39633759 upstream.

When adding a socket option support in MPTCP, both the get and set parts
are supposed to be implemented.

IPV6_V6ONLY support for the setsockopt part has been added a while ago,
but it looks like the get part got forgotten. It should have been
present as a way to verify a setting has been set as expected, and not
to act differently from TCP or any other socket types.

Not supporting this getsockopt(IPV6_V6ONLY) blocks some apps which want
to check the default value, before doing extra actions. On Linux, the
default value is 0, but this can be changed with the net.ipv6.bindv6only
sysctl knob. On Windows, it is set to 1 by default. So supporting the
get part, like for all other socket options, is important.

Everything was in place to expose it, just the last step was missing.
Only new code is added to cover this specific getsockopt(), that seems
safe.

Fixes: c9b95a1359 ("mptcp: support IPV6_V6ONLY setsockopt")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/550
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314-net-mptcp-fix-data-stream-corr-sockopt-v1-2-122dbb249db3@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-20 10:15:38 +02:00
Willem de Bruijn
806908d5d9 bpf: support SKF_NET_OFF and SKF_LL_OFF on skb frags
[ Upstream commit d4bac0288a ]

Classic BPF socket filters with SKB_NET_OFF and SKB_LL_OFF fail to
read when these offsets extend into frags.

This has been observed with iwlwifi and reproduced with tun with
IFF_NAPI_FRAGS. The below straightforward socket filter on UDP port,
applied to a RAW socket, will silently miss matching packets.

    const int offset_proto = offsetof(struct ip6_hdr, ip6_nxt);
    const int offset_dport = sizeof(struct ip6_hdr) + offsetof(struct udphdr, dest);
    struct sock_filter filter_code[] = {
            BPF_STMT(BPF_LD  + BPF_B   + BPF_ABS, SKF_AD_OFF + SKF_AD_PKTTYPE),
            BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, PACKET_HOST, 0, 4),
            BPF_STMT(BPF_LD  + BPF_B   + BPF_ABS, SKF_NET_OFF + offset_proto),
            BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, IPPROTO_UDP, 0, 2),
            BPF_STMT(BPF_LD  + BPF_H   + BPF_ABS, SKF_NET_OFF + offset_dport),

This is unexpected behavior. Socket filter programs should be
consistent regardless of environment. Silent misses are
particularly concerning as hard to detect.

Use skb_copy_bits for offsets outside linear, same as done for
non-SKF_(LL|NET) offsets.

Offset is always positive after subtracting the reference threshold
SKB_(LL|NET)_OFF, so is always >= skb_(mac|network)_offset. The sum of
the two is an offset against skb->data, and may be negative, but it
cannot point before skb->head, as skb_(mac|network)_offset would too.

This appears to go back to when frag support was introduced to
sk_run_filter in linux-2.4.4, before the introduction of git.

The amount of code change and 8/16/32 bit duplication are unfortunate.
But any attempt I made to be smarter saved very few LoC while
complicating the code.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/netdev/20250122200402.3461154-1-maze@google.com/
Link: https://elixir.bootlin.com/linux/2.4.4/source/net/core/filter.c#L244
Reported-by: Matt Moeller <moeller.matt@gmail.com>
Co-developed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20250408132833.195491-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-20 10:15:28 +02:00
Pedro Nishiyama
09246dfb5c Bluetooth: Add quirk for broken READ_PAGE_SCAN_TYPE
[ Upstream commit 127881334e ]

Some fake controllers cannot be initialized because they return a smaller
report than expected for READ_PAGE_SCAN_TYPE.

Signed-off-by: Pedro Nishiyama <nishiyama.pedro@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-20 10:15:22 +02:00
Pedro Nishiyama
035e1bffc0 Bluetooth: Add quirk for broken READ_VOICE_SETTING
[ Upstream commit ff26b2dd65 ]

Some fake controllers cannot be initialized because they return a smaller
report than expected for READ_VOICE_SETTING.

Signed-off-by: Pedro Nishiyama <nishiyama.pedro@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-20 10:15:22 +02:00
Stanislav Fomichev
299d7d27af net: vlan: don't propagate flags on open
[ Upstream commit 27b918007d ]

With the device instance lock, there is now a possibility of a deadlock:

[    1.211455] ============================================
[    1.211571] WARNING: possible recursive locking detected
[    1.211687] 6.14.0-rc5-01215-g032756b4ca7a-dirty #5 Not tainted
[    1.211823] --------------------------------------------
[    1.211936] ip/184 is trying to acquire lock:
[    1.212032] ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_set_allmulti+0x4e/0xb0
[    1.212207]
[    1.212207] but task is already holding lock:
[    1.212332] ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_open+0x50/0xb0
[    1.212487]
[    1.212487] other info that might help us debug this:
[    1.212626]  Possible unsafe locking scenario:
[    1.212626]
[    1.212751]        CPU0
[    1.212815]        ----
[    1.212871]   lock(&dev->lock);
[    1.212944]   lock(&dev->lock);
[    1.213016]
[    1.213016]  *** DEADLOCK ***
[    1.213016]
[    1.213143]  May be due to missing lock nesting notation
[    1.213143]
[    1.213294] 3 locks held by ip/184:
[    1.213371]  #0: ffffffff838b53e0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock+0x1b/0xa0
[    1.213543]  #1: ffffffff84e5fc70 (&net->rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock+0x37/0xa0
[    1.213727]  #2: ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_open+0x50/0xb0
[    1.213895]
[    1.213895] stack backtrace:
[    1.213991] CPU: 0 UID: 0 PID: 184 Comm: ip Not tainted 6.14.0-rc5-01215-g032756b4ca7a-dirty #5
[    1.213993] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[    1.213994] Call Trace:
[    1.213995]  <TASK>
[    1.213996]  dump_stack_lvl+0x8e/0xd0
[    1.214000]  print_deadlock_bug+0x28b/0x2a0
[    1.214020]  lock_acquire+0xea/0x2a0
[    1.214027]  __mutex_lock+0xbf/0xd40
[    1.214038]  dev_set_allmulti+0x4e/0xb0 # real_dev->flags & IFF_ALLMULTI
[    1.214040]  vlan_dev_open+0xa5/0x170 # ndo_open on vlandev
[    1.214042]  __dev_open+0x145/0x270
[    1.214046]  __dev_change_flags+0xb0/0x1e0
[    1.214051]  netif_change_flags+0x22/0x60 # IFF_UP vlandev
[    1.214053]  dev_change_flags+0x61/0xb0 # for each device in group from dev->vlan_info
[    1.214055]  vlan_device_event+0x766/0x7c0 # on netdevsim0
[    1.214058]  notifier_call_chain+0x78/0x120
[    1.214062]  netif_open+0x6d/0x90
[    1.214064]  dev_open+0x5b/0xb0 # locks netdevsim0
[    1.214066]  bond_enslave+0x64c/0x1230
[    1.214075]  do_set_master+0x175/0x1e0 # on netdevsim0
[    1.214077]  do_setlink+0x516/0x13b0
[    1.214094]  rtnl_newlink+0xaba/0xb80
[    1.214132]  rtnetlink_rcv_msg+0x440/0x490
[    1.214144]  netlink_rcv_skb+0xeb/0x120
[    1.214150]  netlink_unicast+0x1f9/0x320
[    1.214153]  netlink_sendmsg+0x346/0x3f0
[    1.214157]  __sock_sendmsg+0x86/0xb0
[    1.214160]  ____sys_sendmsg+0x1c8/0x220
[    1.214164]  ___sys_sendmsg+0x28f/0x2d0
[    1.214179]  __x64_sys_sendmsg+0xef/0x140
[    1.214184]  do_syscall_64+0xec/0x1d0
[    1.214190]  entry_SYSCALL_64_after_hwframe+0x77/0x7f
[    1.214191] RIP: 0033:0x7f2d1b4a7e56

Device setup:

     netdevsim0 (down)
     ^        ^
  bond        netdevsim1.100@netdevsim1 allmulticast=on (down)

When we enslave the lower device (netdevsim0) which has a vlan, we
propagate vlan's allmuti/promisc flags during ndo_open. This causes
(re)locking on of the real_dev.

Propagate allmulti/promisc on flags change, not on the open. There
is a slight semantics change that vlans that are down now propagate
the flags, but this seems unlikely to result in the real issues.

Reproducer:

  echo 0 1 > /sys/bus/netdevsim/new_device

  dev_path=$(ls -d /sys/bus/netdevsim/devices/netdevsim0/net/*)
  dev=$(echo $dev_path | rev | cut -d/ -f1 | rev)

  ip link set dev $dev name netdevsim0
  ip link set dev netdevsim0 up

  ip link add link netdevsim0 name netdevsim0.100 type vlan id 100
  ip link set dev netdevsim0.100 allmulticast on down
  ip link add name bond1 type bond mode 802.3ad
  ip link set dev netdevsim0 down
  ip link set dev netdevsim0 master bond1
  ip link set dev bond1 up
  ip link show

Reported-by: syzbot+b0c03d76056ef6cd12a6@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/Z9CfXjLMKn6VLG5d@mini-arch/T/#m15ba130f53227c883e79fb969687d69d670337a0
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250313100657.2287455-1-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-20 10:15:21 +02:00
Jason Xing
7204335d19 page_pool: avoid infinite loop to schedule delayed worker
[ Upstream commit 43130d02ba ]

We noticed the kworker in page_pool_release_retry() was waken
up repeatedly and infinitely in production because of the
buggy driver causing the inflight less than 0 and warning
us in page_pool_inflight()[1].

Since the inflight value goes negative, it means we should
not expect the whole page_pool to get back to work normally.

This patch mitigates the adverse effect by not rescheduling
the kworker when detecting the inflight negative in
page_pool_release_retry().

[1]
[Mon Feb 10 20:36:11 2025] ------------[ cut here ]------------
[Mon Feb 10 20:36:11 2025] Negative(-51446) inflight packet-pages
...
[Mon Feb 10 20:36:11 2025] Call Trace:
[Mon Feb 10 20:36:11 2025]  page_pool_release_retry+0x23/0x70
[Mon Feb 10 20:36:11 2025]  process_one_work+0x1b1/0x370
[Mon Feb 10 20:36:11 2025]  worker_thread+0x37/0x3a0
[Mon Feb 10 20:36:11 2025]  kthread+0x11a/0x140
[Mon Feb 10 20:36:11 2025]  ? process_one_work+0x370/0x370
[Mon Feb 10 20:36:11 2025]  ? __kthread_cancel_work+0x40/0x40
[Mon Feb 10 20:36:11 2025]  ret_from_fork+0x35/0x40
[Mon Feb 10 20:36:11 2025] ---[ end trace ebffe800f33e7e34 ]---
Note: before this patch, the above calltrace would flood the
dmesg due to repeated reschedule of release_dw kworker.

Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250214064250.85987-1-kerneljasonxing@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-20 10:15:18 +02:00
Miri Korenblit
4ae2c7c7d3 wifi: mac80211: ensure sdata->work is canceled before initialized.
[ Upstream commit 6c93fd5020 ]

This wiphy work is canceled when the iface is stopped,
and shouldn't be queued for a non-running iface.
If it happens to be queued for a non-running iface (due to a bug)
it can cause a corruption of wiphy_work_list when ieee80211_setup_sdata
is called. Make sure to cancel it in this case and warn on.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250205110958.99204c767c10.I84ce27a239059f6009cee197b252549a11426046@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-20 10:15:17 +02:00
Johannes Berg
cca16fbd17 wifi: mac80211: add strict mode disabling workarounds
[ Upstream commit 3ad4fce66e ]

Add a strict mode where we disable certain workarounds and have
additional checks such as, for now, that VHT capabilities from
association response match those from beacon/probe response. We
can extend the checks in the future.

Make it an opt-in setting by the driver so it can be set there
in some driver-specific way, for example. Also allow setting
this one hw flag through the hwflags debugfs, by writing a new
strict=0 or strict=1 value.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.5cecb0469479.I4a69617dc60ba0d6308416ffbc3102cfd08ba068@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-20 10:15:17 +02:00
Pavel Begunkov
a6bf0fd322 net: page_pool: don't cast mp param to devmem
[ Upstream commit 8d522566ae ]

page_pool_check_memory_provider() is a generic path and shouldn't assume
anything about the actual type of the memory provider argument. It's
fine while devmem is the only provider, but cast away the devmem
specific binding types to avoid confusion.

Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250204215622.695511-2-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-20 10:15:17 +02:00
Florian Westphal
7640c2abb6 nft_set_pipapo: fix incorrect avx2 match of 5th field octet
[ Upstream commit e042ed950d ]

Given a set element like:

	icmpv6 . dead:beef:00ff::1

The value of 'ff' is irrelevant, any address will be matched
as long as the other octets are the same.

This is because of too-early register clobbering:
ymm7 is reloaded with new packet data (pkt[9])  but it still holds data
of an earlier load that wasn't processed yet.

The existing tests in nft_concat_range.sh selftests do exercise this code
path, but do not trigger incorrect matching due to the network prefix
limitation.

Fixes: 7400b06396 ("nft_set_pipapo: Introduce AVX2-based lookup implementation")
Reported-by: sontu mazumdar <sontu21@gmail.com>
Closes: https://lore.kernel.org/netfilter/CANgxkqwnMH7fXra+VUfODT-8+qFLgskq3set1cAzqqJaV4iEZg@mail.gmail.com/T/#t
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-20 10:15:09 +02:00
Ido Schimmel
cc16f7402a ipv6: Align behavior across nexthops during path selection
[ Upstream commit 6933cd4714 ]

A nexthop is only chosen when the calculated multipath hash falls in the
nexthop's hash region (i.e., the hash is smaller than the nexthop's hash
threshold) and when the nexthop is assigned a non-negative score by
rt6_score_route().

Commit 4d0ab3a688 ("ipv6: Start path selection from the first
nexthop") introduced an unintentional difference between the first
nexthop and the rest when the score is negative.

When the first nexthop matches, but has a negative score, the code will
currently evaluate subsequent nexthops until one is found with a
non-negative score. On the other hand, when a different nexthop matches,
but has a negative score, the code will fallback to the nexthop with
which the selection started ('match').

Align the behavior across all nexthops and fallback to 'match' when the
first nexthop matches, but has a negative score.

Fixes: 3d709f69a3 ("ipv6: Use hash-threshold instead of modulo-N")
Fixes: 4d0ab3a688 ("ipv6: Start path selection from the first nexthop")
Reported-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Closes: https://lore.kernel.org/netdev/67efef607bc41_1ddca82948c@willemb.c.googlers.com.notmuch/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250408084316.243559-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-20 10:15:09 +02:00
Octavian Purdila
f86293adce net_sched: sch_sfq: move the limit validation
[ Upstream commit b3bf8f63e6 ]

It is not sufficient to directly validate the limit on the data that
the user passes as it can be updated based on how the other parameters
are changed.

Move the check at the end of the configuration update process to also
catch scenarios where the limit is indirectly updated, for example
with the following configurations:

tc qdisc add dev dummy0 handle 1: root sfq limit 2 flows 1 depth 1
tc qdisc add dev dummy0 handle 1: root sfq limit 2 flows 1 divisor 1

This fixes the following syzkaller reported crash:

------------[ cut here ]------------
UBSAN: array-index-out-of-bounds in net/sched/sch_sfq.c:203:6
index 65535 is out of range for type 'struct sfq_head[128]'
CPU: 1 UID: 0 PID: 3037 Comm: syz.2.16 Not tainted 6.14.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:94 [inline]
 dump_stack_lvl+0x201/0x300 lib/dump_stack.c:120
 ubsan_epilogue lib/ubsan.c:231 [inline]
 __ubsan_handle_out_of_bounds+0xf5/0x120 lib/ubsan.c:429
 sfq_link net/sched/sch_sfq.c:203 [inline]
 sfq_dec+0x53c/0x610 net/sched/sch_sfq.c:231
 sfq_dequeue+0x34e/0x8c0 net/sched/sch_sfq.c:493
 sfq_reset+0x17/0x60 net/sched/sch_sfq.c:518
 qdisc_reset+0x12e/0x600 net/sched/sch_generic.c:1035
 tbf_reset+0x41/0x110 net/sched/sch_tbf.c:339
 qdisc_reset+0x12e/0x600 net/sched/sch_generic.c:1035
 dev_reset_queue+0x100/0x1b0 net/sched/sch_generic.c:1311
 netdev_for_each_tx_queue include/linux/netdevice.h:2590 [inline]
 dev_deactivate_many+0x7e5/0xe70 net/sched/sch_generic.c:1375

Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: 10685681ba ("net_sched: sch_sfq: don't allow 1 packet limit")
Signed-off-by: Octavian Purdila <tavip@google.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-20 10:15:08 +02:00
Octavian Purdila
70449ca406 net_sched: sch_sfq: use a temporary work area for validating configuration
[ Upstream commit 8c0cea59d4 ]

Many configuration parameters have influence on others (e.g. divisor
-> flows -> limit, depth -> limit) and so it is difficult to correctly
do all of the validation before applying the configuration. And if a
validation error is detected late it is difficult to roll back a
partially applied configuration.

To avoid these issues use a temporary work area to update and validate
the configuration and only then apply the configuration to the
internal state.

Signed-off-by: Octavian Purdila <tavip@google.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: b3bf8f63e6 ("net_sched: sch_sfq: move the limit validation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-20 10:15:08 +02:00
Maxime Chevallier
a065b99605 net: ethtool: Don't call .cleanup_data when prepare_data fails
[ Upstream commit 4f038a6a02 ]

There's a consistent pattern where the .cleanup_data() callback is
called when .prepare_data() fails, when it should really be called to
clean after a successful .prepare_data() as per the documentation.

Rewrite the error-handling paths to make sure we don't cleanup
un-prepared data.

Fixes: c781ff12a2 ("ethtool: Allow network drivers to dump arbitrary EEPROM data")
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250407130511.75621-1-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-20 10:15:07 +02:00
Toke Høiland-Jørgensen
b2f3c3d57a tc: Ensure we have enough buffer space when sending filter netlink notifications
[ Upstream commit 369609fc62 ]

The tfilter_notify() and tfilter_del_notify() functions assume that
NLMSG_GOODSIZE is always enough to dump the filter chain. This is not
always the case, which can lead to silent notify failures (because the
return code of tfilter_notify() is not always checked). In particular,
this can lead to NLM_F_ECHO not being honoured even though an action
succeeds, which forces userspace to create workarounds[0].

Fix this by increasing the message size if dumping the filter chain into
the allocated skb fails. Use the size of the incoming skb as a size hint
if set, so we can start at a larger value when appropriate.

To trigger this, run the following commands:

 # ip link add type veth
 # tc qdisc replace dev veth0 root handle 1: fq_codel
 # tc -echo filter add dev veth0 parent 1: u32 match u32 0 0 $(for i in $(seq 32); do echo action pedit munge ip dport set 22; done)

Before this fix, tc just returns:

Not a filter(cmd 2)

After the fix, we get the correct echo:

added filter dev veth0 parent 1: protocol all pref 49152 u32 chain 0 fh 800::800 order 2048 key ht 800 bkt 0 terminal flowid not_in_hw
  match 00000000/00000000 at 0
	action order 1:  pedit action pass keys 1
 	index 1 ref 1 bind 1
	key #0  at 20: val 00000016 mask ffff0000
[repeated 32 times]

[0] 106ef21860

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Frode Nordahl <frode.nordahl@canonical.com>
Closes: https://bugs.launchpad.net/ubuntu/+source/openvswitch/+bug/2018500
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250407105542.16601-1-toke@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-20 10:15:07 +02:00
Jakub Kicinski
9fcbca0f80 net: tls: explicitly disallow disconnect
[ Upstream commit 5071a1e606 ]

syzbot discovered that it can disconnect a TLS socket and then
run into all sort of unexpected corner cases. I have a vague
recollection of Eric pointing this out to us a long time ago.
Supporting disconnect is really hard, for one thing if offload
is enabled we'd need to wait for all packets to be _acked_.
Disconnect is not commonly used, disallow it.

The immediate problem syzbot run into is the warning in the strp,
but that's just the easiest bug to trigger:

  WARNING: CPU: 0 PID: 5834 at net/tls/tls_strp.c:486 tls_strp_msg_load+0x72e/0xa80 net/tls/tls_strp.c:486
  RIP: 0010:tls_strp_msg_load+0x72e/0xa80 net/tls/tls_strp.c:486
  Call Trace:
   <TASK>
   tls_rx_rec_wait+0x280/0xa60 net/tls/tls_sw.c:1363
   tls_sw_recvmsg+0x85c/0x1c30 net/tls/tls_sw.c:2043
   inet6_recvmsg+0x2c9/0x730 net/ipv6/af_inet6.c:678
   sock_recvmsg_nosec net/socket.c:1023 [inline]
   sock_recvmsg+0x109/0x280 net/socket.c:1045
   __sys_recvfrom+0x202/0x380 net/socket.c:2237

Fixes: 3c4d755915 ("tls: kernel TLS support")
Reported-by: syzbot+b4cd76826045a1eb93c1@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250404180334.3224206-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-20 10:15:06 +02:00
Cong Wang
4d55144b12 codel: remove sch->q.qlen check before qdisc_tree_reduce_backlog()
[ Upstream commit 342debc121 ]

After making all ->qlen_notify() callbacks idempotent, now it is safe to
remove the check of qlen!=0 from both fq_codel_dequeue() and
codel_qdisc_dequeue().

Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Fixes: 4b549a2ef4 ("fq_codel: Fair Queue Codel AQM")
Fixes: 76e3cc126b ("codel: Controlled Delay AQM")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250403211636.166257-1-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-20 10:15:06 +02:00
Tung Nguyen
7c5957f790 tipc: fix memory leak in tipc_link_xmit
[ Upstream commit 69ae94725f ]

In case the backlog transmit queue for system-importance messages is overloaded,
tipc_link_xmit() returns -ENOBUFS but the skb list is not purged. This leads to
memory leak and failure when a skb is allocated.

This commit fixes this issue by purging the skb list before tipc_link_xmit()
returns.

Fixes: 365ad353c2 ("tipc: reduce risk of user starvation during link congestion")
Signed-off-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20250403092431.514063-1-tung.quang.nguyen@est.tech
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-20 10:15:06 +02:00
Alexander Wetzel
86f327305e wifi: mac80211: Fix sparse warning for monitor_sdata
commit 861d0445e7 upstream.

Use rcu_access_pointer() to avoid sparse warning in
drv_remove_interface().

Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502130534.bVrZZBK0-lkp@intel.com/
Fixes: 646262c71a ("wifi: mac80211: remove debugfs dir for virtual monitor")
Link: https://patch.msgid.link/20250213214330.6113-1-Alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-10 14:39:36 +02:00
Ido Schimmel
f4fea25f5c ipv6: Do not consider link down nexthops in path selection
[ Upstream commit 8b8e0dd357 ]

Nexthops whose link is down are not supposed to be considered during
path selection when the "ignore_routes_with_linkdown" sysctl is set.
This is done by assigning them a negative region boundary.

However, when comparing the computed hash (unsigned) with the region
boundary (signed), the negative region boundary is treated as unsigned,
resulting in incorrect nexthop selection.

Fix by treating the computed hash as signed. Note that the computed hash
is always in range of [0, 2^31 - 1].

Fixes: 3d709f69a3 ("ipv6: Use hash-threshold instead of modulo-N")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250402114224.293392-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10 14:39:34 +02:00
Ido Schimmel
1eb36a2cdf ipv6: Start path selection from the first nexthop
[ Upstream commit 4d0ab3a688 ]

Cited commit transitioned IPv6 path selection to use hash-threshold
instead of modulo-N. With hash-threshold, each nexthop is assigned a
region boundary in the multipath hash function's output space and a
nexthop is chosen if the calculated hash is smaller than the nexthop's
region boundary.

Hash-threshold does not work correctly if path selection does not start
with the first nexthop. For example, if fib6_select_path() is always
passed the last nexthop in the group, then it will always be chosen
because its region boundary covers the entire hash function's output
space.

Fix this by starting the selection process from the first nexthop and do
not consider nexthops for which rt6_score_route() provided a negative
score.

Fixes: 3d709f69a3 ("ipv6: Use hash-threshold instead of modulo-N")
Reported-by: Stanislav Fomichev <stfomichev@gmail.com>
Closes: https://lore.kernel.org/netdev/Z9RIyKZDNoka53EO@mini-arch/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250402114224.293392-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10 14:39:34 +02:00
Lin Ma
2952776c69 net: fix geneve_opt length integer overflow
[ Upstream commit b27055a08a ]

struct geneve_opt uses 5 bit length for each single option, which
means every vary size option should be smaller than 128 bytes.

However, all current related Netlink policies cannot promise this
length condition and the attacker can exploit a exact 128-byte size
option to *fake* a zero length option and confuse the parsing logic,
further achieve heap out-of-bounds read.

One example crash log is like below:

[    3.905425] ==================================================================
[    3.905925] BUG: KASAN: slab-out-of-bounds in nla_put+0xa9/0xe0
[    3.906255] Read of size 124 at addr ffff888005f291cc by task poc/177
[    3.906646]
[    3.906775] CPU: 0 PID: 177 Comm: poc-oob-read Not tainted 6.1.132 #1
[    3.907131] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[    3.907784] Call Trace:
[    3.907925]  <TASK>
[    3.908048]  dump_stack_lvl+0x44/0x5c
[    3.908258]  print_report+0x184/0x4be
[    3.909151]  kasan_report+0xc5/0x100
[    3.909539]  kasan_check_range+0xf3/0x1a0
[    3.909794]  memcpy+0x1f/0x60
[    3.909968]  nla_put+0xa9/0xe0
[    3.910147]  tunnel_key_dump+0x945/0xba0
[    3.911536]  tcf_action_dump_1+0x1c1/0x340
[    3.912436]  tcf_action_dump+0x101/0x180
[    3.912689]  tcf_exts_dump+0x164/0x1e0
[    3.912905]  fw_dump+0x18b/0x2d0
[    3.913483]  tcf_fill_node+0x2ee/0x460
[    3.914778]  tfilter_notify+0xf4/0x180
[    3.915208]  tc_new_tfilter+0xd51/0x10d0
[    3.918615]  rtnetlink_rcv_msg+0x4a2/0x560
[    3.919118]  netlink_rcv_skb+0xcd/0x200
[    3.919787]  netlink_unicast+0x395/0x530
[    3.921032]  netlink_sendmsg+0x3d0/0x6d0
[    3.921987]  __sock_sendmsg+0x99/0xa0
[    3.922220]  __sys_sendto+0x1b7/0x240
[    3.922682]  __x64_sys_sendto+0x72/0x90
[    3.922906]  do_syscall_64+0x5e/0x90
[    3.923814]  entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[    3.924122] RIP: 0033:0x7e83eab84407
[    3.924331] Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 faf
[    3.925330] RSP: 002b:00007ffff505e370 EFLAGS: 00000202 ORIG_RAX: 000000000000002c
[    3.925752] RAX: ffffffffffffffda RBX: 00007e83eaafa740 RCX: 00007e83eab84407
[    3.926173] RDX: 00000000000001a8 RSI: 00007ffff505e3c0 RDI: 0000000000000003
[    3.926587] RBP: 00007ffff505f460 R08: 00007e83eace1000 R09: 000000000000000c
[    3.926977] R10: 0000000000000000 R11: 0000000000000202 R12: 00007ffff505f3c0
[    3.927367] R13: 00007ffff505f5c8 R14: 00007e83ead1b000 R15: 00005d4fbbe6dcb8

Fix these issues by enforing correct length condition in related
policies.

Fixes: 925d844696 ("netfilter: nft_tunnel: add support for geneve opts")
Fixes: 4ece477870 ("lwtunnel: add options setting and dumping for geneve")
Fixes: 0ed5269f9e ("net/sched: add tunnel option support to act_tunnel_key")
Fixes: 0a6e77784f ("net/sched: allow flower to match tunnel options")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20250402165632.6958-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10 14:39:34 +02:00
Fernando Fernandez Mancera
de579015d1 ipv6: fix omitted netlink attributes when using RTEXT_FILTER_SKIP_STATS
[ Upstream commit 7ac6ea4a3e ]

Using RTEXT_FILTER_SKIP_STATS is incorrectly skipping non-stats IPv6
netlink attributes on link dump. This causes issues on userspace tools,
e.g iproute2 is not rendering address generation mode as it should due
to missing netlink attribute.

Move the filling of IFLA_INET6_STATS and IFLA_INET6_ICMP6STATS to a
helper function guarded by a flag check to avoid hitting the same
situation in the future.

Fixes: d5566fd72e ("rtnetlink: RTEXT_FILTER_SKIP_STATS support to avoid dumping inet/inet6 stats")
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250402121751.3108-1-ffmancera@riseup.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10 14:39:34 +02:00
Lin Ma
0a93a710d6 netfilter: nft_tunnel: fix geneve_opt type confusion addition
[ Upstream commit 1b755d8eb1 ]

When handling multiple NFTA_TUNNEL_KEY_OPTS_GENEVE attributes, the
parsing logic should place every geneve_opt structure one by one
compactly. Hence, when deciding the next geneve_opt position, the
pointer addition should be in units of char *.

However, the current implementation erroneously does type conversion
before the addition, which will lead to heap out-of-bounds write.

[    6.989857] ==================================================================
[    6.990293] BUG: KASAN: slab-out-of-bounds in nft_tunnel_obj_init+0x977/0xa70
[    6.990725] Write of size 124 at addr ffff888005f18974 by task poc/178
[    6.991162]
[    6.991259] CPU: 0 PID: 178 Comm: poc-oob-write Not tainted 6.1.132 #1
[    6.991655] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[    6.992281] Call Trace:
[    6.992423]  <TASK>
[    6.992586]  dump_stack_lvl+0x44/0x5c
[    6.992801]  print_report+0x184/0x4be
[    6.993790]  kasan_report+0xc5/0x100
[    6.994252]  kasan_check_range+0xf3/0x1a0
[    6.994486]  memcpy+0x38/0x60
[    6.994692]  nft_tunnel_obj_init+0x977/0xa70
[    6.995677]  nft_obj_init+0x10c/0x1b0
[    6.995891]  nf_tables_newobj+0x585/0x950
[    6.996922]  nfnetlink_rcv_batch+0xdf9/0x1020
[    6.998997]  nfnetlink_rcv+0x1df/0x220
[    6.999537]  netlink_unicast+0x395/0x530
[    7.000771]  netlink_sendmsg+0x3d0/0x6d0
[    7.001462]  __sock_sendmsg+0x99/0xa0
[    7.001707]  ____sys_sendmsg+0x409/0x450
[    7.002391]  ___sys_sendmsg+0xfd/0x170
[    7.003145]  __sys_sendmsg+0xea/0x170
[    7.004359]  do_syscall_64+0x5e/0x90
[    7.005817]  entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[    7.006127] RIP: 0033:0x7ec756d4e407
[    7.006339] Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 faf
[    7.007364] RSP: 002b:00007ffed5d46760 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
[    7.007827] RAX: ffffffffffffffda RBX: 00007ec756cc4740 RCX: 00007ec756d4e407
[    7.008223] RDX: 0000000000000000 RSI: 00007ffed5d467f0 RDI: 0000000000000003
[    7.008620] RBP: 00007ffed5d468a0 R08: 0000000000000000 R09: 0000000000000000
[    7.009039] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000
[    7.009429] R13: 00007ffed5d478b0 R14: 00007ec756ee5000 R15: 00005cbd4e655cb8

Fix this bug with correct pointer addition and conversion in parse
and dump code.

Fixes: 925d844696 ("netfilter: nft_tunnel: add support for geneve opts")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10 14:39:34 +02:00
Antoine Tenart
92a5c18513 net: decrease cached dst counters in dst_release
[ Upstream commit 3a0a3ff659 ]

Upstream fix ac888d5886 ("net: do not delay dst_entries_add() in
dst_release()") moved decrementing the dst count from dst_destroy to
dst_release to avoid accessing already freed data in case of netns
dismantle. However in case CONFIG_DST_CACHE is enabled and OvS+tunnels
are used, this fix is incomplete as the same issue will be seen for
cached dsts:

  Unable to handle kernel paging request at virtual address ffff5aabf6b5c000
  Call trace:
   percpu_counter_add_batch+0x3c/0x160 (P)
   dst_release+0xec/0x108
   dst_cache_destroy+0x68/0xd8
   dst_destroy+0x13c/0x168
   dst_destroy_rcu+0x1c/0xb0
   rcu_do_batch+0x18c/0x7d0
   rcu_core+0x174/0x378
   rcu_core_si+0x18/0x30

Fix this by invalidating the cache, and thus decrementing cached dst
counters, in dst_release too.

Fixes: d71785ffc7 ("net: add dst_cache to ovs vxlan lwtunnel")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20250326173634.31096-1-atenart@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10 14:39:34 +02:00
Guillaume Nault
9539c1721a tunnels: Accept PACKET_HOST in skb_tunnel_check_pmtu().
[ Upstream commit 8930424777 ]

Because skb_tunnel_check_pmtu() doesn't handle PACKET_HOST packets,
commit 30a92c9e3d ("openvswitch: Set the skbuff pkt_type for proper
pmtud support.") forced skb->pkt_type to PACKET_OUTGOING for
openvswitch packets that are sent using the OVS_ACTION_ATTR_OUTPUT
action. This allowed such packets to invoke the
iptunnel_pmtud_check_icmp() or iptunnel_pmtud_check_icmpv6() helpers
and thus trigger PMTU update on the input device.

However, this also broke other parts of PMTU discovery. Since these
packets don't have the PACKET_HOST type anymore, they won't trigger the
sending of ICMP Fragmentation Needed or Packet Too Big messages to
remote hosts when oversized (see the skb_in->pkt_type condition in
__icmp_send() for example).

These two skb->pkt_type checks are therefore incompatible as one
requires skb->pkt_type to be PACKET_HOST, while the other requires it
to be anything but PACKET_HOST.

It makes sense to not trigger ICMP messages for non-PACKET_HOST packets
as these messages should be generated only for incoming l2-unicast
packets. However there doesn't seem to be any reason for
skb_tunnel_check_pmtu() to ignore PACKET_HOST packets.

Allow both cases to work by allowing skb_tunnel_check_pmtu() to work on
PACKET_HOST packets and not overriding skb->pkt_type in openvswitch
anymore.

Fixes: 30a92c9e3d ("openvswitch: Set the skbuff pkt_type for proper pmtud support.")
Fixes: 4cb47a8644 ("tunnels: PMTU discovery support for directly bridged IP packets")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Tested-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/eac941652b86fddf8909df9b3bf0d97bc9444793.1743208264.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10 14:39:34 +02:00
Stefano Garzarella
47744d0d5f vsock: avoid timeout during connect() if the socket is closing
[ Upstream commit fccd2b711d ]

When a peer attempts to establish a connection, vsock_connect() contains
a loop that waits for the state to be TCP_ESTABLISHED. However, the
other peer can be fast enough to accept the connection and close it
immediately, thus moving the state to TCP_CLOSING.

When this happens, the peer in the vsock_connect() is properly woken up,
but since the state is not TCP_ESTABLISHED, it goes back to sleep
until the timeout expires, returning -ETIMEDOUT.

If the socket state is TCP_CLOSING, waiting for the timeout is pointless.
vsock_connect() can return immediately without errors or delay since the
connection actually happened. The socket will be in a closing state,
but this is not an issue, and subsequent calls will fail as expected.

We discovered this issue while developing a test that accepts and
immediately closes connections to stress the transport switch between
two connect() calls, where the first one was interrupted by a signal
(see Closes link).

Reported-by: Luigi Leonardi <leonardi@redhat.com>
Closes: https://lore.kernel.org/virtualization/bq6hxrolno2vmtqwcvb5bljfpb7mvwb3kohrvaed6auz5vxrfv@ijmd2f3grobn/
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Link: https://patch.msgid.link/20250328141528.420719-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10 14:39:34 +02:00
Kuniyuki Iwashima
a116b271bf udp: Fix memory accounting leak.
[ Upstream commit df207de9d9 ]

Matt Dowling reported a weird UDP memory usage issue.

Under normal operation, the UDP memory usage reported in /proc/net/sockstat
remains close to zero.  However, it occasionally spiked to 524,288 pages
and never dropped.  Moreover, the value doubled when the application was
terminated.  Finally, it caused intermittent packet drops.

We can reproduce the issue with the script below [0]:

  1. /proc/net/sockstat reports 0 pages

    # cat /proc/net/sockstat | grep UDP:
    UDP: inuse 1 mem 0

  2. Run the script till the report reaches 524,288

    # python3 test.py & sleep 5
    # cat /proc/net/sockstat | grep UDP:
    UDP: inuse 3 mem 524288  <-- (INT_MAX + 1) >> PAGE_SHIFT

  3. Kill the socket and confirm the number never drops

    # pkill python3 && sleep 5
    # cat /proc/net/sockstat | grep UDP:
    UDP: inuse 1 mem 524288

  4. (necessary since v6.0) Trigger proto_memory_pcpu_drain()

    # python3 test.py & sleep 1 && pkill python3

  5. The number doubles

    # cat /proc/net/sockstat | grep UDP:
    UDP: inuse 1 mem 1048577

The application set INT_MAX to SO_RCVBUF, which triggered an integer
overflow in udp_rmem_release().

When a socket is close()d, udp_destruct_common() purges its receive
queue and sums up skb->truesize in the queue.  This total is calculated
and stored in a local unsigned integer variable.

The total size is then passed to udp_rmem_release() to adjust memory
accounting.  However, because the function takes a signed integer
argument, the total size can wrap around, causing an overflow.

Then, the released amount is calculated as follows:

  1) Add size to sk->sk_forward_alloc.
  2) Round down sk->sk_forward_alloc to the nearest lower multiple of
      PAGE_SIZE and assign it to amount.
  3) Subtract amount from sk->sk_forward_alloc.
  4) Pass amount >> PAGE_SHIFT to __sk_mem_reduce_allocated().

When the issue occurred, the total in udp_destruct_common() was 2147484480
(INT_MAX + 833), which was cast to -2147482816 in udp_rmem_release().

At 1) sk->sk_forward_alloc is changed from 3264 to -2147479552, and
2) sets -2147479552 to amount.  3) reverts the wraparound, so we don't
see a warning in inet_sock_destruct().  However, udp_memory_allocated
ends up doubling at 4).

Since commit 3cd3399dd7 ("net: implement per-cpu reserves for
memory_allocated"), memory usage no longer doubles immediately after
a socket is close()d because __sk_mem_reduce_allocated() caches the
amount in udp_memory_per_cpu_fw_alloc.  However, the next time a UDP
socket receives a packet, the subtraction takes effect, causing UDP
memory usage to double.

This issue makes further memory allocation fail once the socket's
sk->sk_rmem_alloc exceeds net.ipv4.udp_rmem_min, resulting in packet
drops.

To prevent this issue, let's use unsigned int for the calculation and
call sk_forward_alloc_add() only once for the small delta.

Note that first_packet_length() also potentially has the same problem.

[0]:
from socket import *

SO_RCVBUFFORCE = 33
INT_MAX = (2 ** 31) - 1

s = socket(AF_INET, SOCK_DGRAM)
s.bind(('', 0))
s.setsockopt(SOL_SOCKET, SO_RCVBUFFORCE, INT_MAX)

c = socket(AF_INET, SOCK_DGRAM)
c.connect(s.getsockname())

data = b'a' * 100

while True:
    c.send(data)

Fixes: f970bd9e3a ("udp: implement memory accounting helpers")
Reported-by: Matt Dowling <madowlin@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250401184501.67377-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10 14:39:34 +02:00
Kuniyuki Iwashima
94d5ad7b41 udp: Fix multiple wraparounds of sk->sk_rmem_alloc.
[ Upstream commit 5a465a0da1 ]

__udp_enqueue_schedule_skb() has the following condition:

  if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf)
          goto drop;

sk->sk_rcvbuf is initialised by net.core.rmem_default and later can
be configured by SO_RCVBUF, which is limited by net.core.rmem_max,
or SO_RCVBUFFORCE.

If we set INT_MAX to sk->sk_rcvbuf, the condition is always false
as sk->sk_rmem_alloc is also signed int.

Then, the size of the incoming skb is added to sk->sk_rmem_alloc
unconditionally.

This results in integer overflow (possibly multiple times) on
sk->sk_rmem_alloc and allows a single socket to have skb up to
net.core.udp_mem[1].

For example, if we set a large value to udp_mem[1] and INT_MAX to
sk->sk_rcvbuf and flood packets to the socket, we can see multiple
overflows:

  # cat /proc/net/sockstat | grep UDP:
  UDP: inuse 3 mem 7956736  <-- (7956736 << 12) bytes > INT_MAX * 15
                                             ^- PAGE_SHIFT
  # ss -uam
  State  Recv-Q      ...
  UNCONN -1757018048 ...    <-- flipping the sign repeatedly
         skmem:(r2537949248,rb2147483646,t0,tb212992,f1984,w0,o0,bl0,d0)

Previously, we had a boundary check for INT_MAX, which was removed by
commit 6a1f12dd85 ("udp: relax atomic operation on sk->sk_rmem_alloc").

A complete fix would be to revert it and cap the right operand by
INT_MAX:

  rmem = atomic_add_return(size, &sk->sk_rmem_alloc);
  if (rmem > min(size + (unsigned int)sk->sk_rcvbuf, INT_MAX))
          goto uncharge_drop;

but we do not want to add the expensive atomic_add_return() back just
for the corner case.

Casting rmem to unsigned int prevents multiple wraparounds, but we still
allow a single wraparound.

  # cat /proc/net/sockstat | grep UDP:
  UDP: inuse 3 mem 524288  <-- (INT_MAX + 1) >> 12

  # ss -uam
  State  Recv-Q      ...
  UNCONN -2147482816 ...   <-- INT_MAX + 831 bytes
         skmem:(r2147484480,rb2147483646,t0,tb212992,f3264,w0,o0,bl0,d14468947)

So, let's define rmem and rcvbuf as unsigned int and check skb->truesize
only when rcvbuf is large enough to lower the overflow possibility.

Note that we still have a small chance to see overflow if multiple skbs
to the same socket are processed on different core at the same time and
each size does not exceed the limit but the total size does.

Note also that we must ignore skb->truesize for a small buffer as
explained in commit 363dc73aca ("udp: be less conservative with
sock rmem accounting").

Fixes: 6a1f12dd85 ("udp: relax atomic operation on sk->sk_rmem_alloc")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250401184501.67377-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10 14:39:34 +02:00
Eric Dumazet
e5178bfc55 sctp: add mutual exclusion in proc_sctp_do_udp_port()
[ Upstream commit 10206302af ]

We must serialize calls to sctp_udp_sock_stop() and sctp_udp_sock_start()
or risk a crash as syzbot reported:

Oops: general protection fault, probably for non-canonical address 0xdffffc000000000d: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f]
CPU: 1 UID: 0 PID: 6551 Comm: syz.1.44 Not tainted 6.14.0-syzkaller-g7f2ff7b62617 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
 RIP: 0010:kernel_sock_shutdown+0x47/0x70 net/socket.c:3653
Call Trace:
 <TASK>
  udp_tunnel_sock_release+0x68/0x80 net/ipv4/udp_tunnel_core.c:181
  sctp_udp_sock_stop+0x71/0x160 net/sctp/protocol.c:930
  proc_sctp_do_udp_port+0x264/0x450 net/sctp/sysctl.c:553
  proc_sys_call_handler+0x3d0/0x5b0 fs/proc/proc_sysctl.c:601
  iter_file_splice_write+0x91c/0x1150 fs/splice.c:738
  do_splice_from fs/splice.c:935 [inline]
  direct_splice_actor+0x18f/0x6c0 fs/splice.c:1158
  splice_direct_to_actor+0x342/0xa30 fs/splice.c:1102
  do_splice_direct_actor fs/splice.c:1201 [inline]
  do_splice_direct+0x174/0x240 fs/splice.c:1227
  do_sendfile+0xafd/0xe50 fs/read_write.c:1368
  __do_sys_sendfile64 fs/read_write.c:1429 [inline]
  __se_sys_sendfile64 fs/read_write.c:1415 [inline]
  __x64_sys_sendfile64+0x1d8/0x220 fs/read_write.c:1415
  do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]

Fixes: 046c052b47 ("sctp: enable udp tunneling socks")
Reported-by: syzbot+fae49d997eb56fa7c74d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/67ea5c01.050a0220.1547ec.012b.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250331091532.224982-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10 14:39:34 +02:00
Cong Wang
2f35b7673a net_sched: skbprio: Remove overly strict queue assertions
[ Upstream commit ce8fe975fd ]

In the current implementation, skbprio enqueue/dequeue contains an assertion
that fails under certain conditions when SKBPRIO is used as a child qdisc under
TBF with specific parameters. The failure occurs because TBF sometimes peeks at
packets in the child qdisc without actually dequeuing them when tokens are
unavailable.

This peek operation creates a discrepancy between the parent and child qdisc
queue length counters. When TBF later receives a high-priority packet,
SKBPRIO's queue length may show a different value than what's reflected in its
internal priority queue tracking, triggering the assertion.

The fix removes this overly strict assertions in SKBPRIO, they are not
necessary at all.

Reported-by: syzbot+a3422a19b05ea96bee18@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a3422a19b05ea96bee18
Fixes: aea5f654e6 ("net/sched: add skbprio scheduler")
Cc: Nishanth Devarajan <ndev2021@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250329222536.696204-2-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10 14:39:33 +02:00
Debin Zhu
3ba9cf69de netlabel: Fix NULL pointer exception caused by CALIPSO on IPv4 sockets
[ Upstream commit 078aabd567 ]

When calling netlbl_conn_setattr(), addr->sa_family is used
to determine the function behavior. If sk is an IPv4 socket,
but the connect function is called with an IPv6 address,
the function calipso_sock_setattr() is triggered.
Inside this function, the following code is executed:

sk_fullsock(__sk) ? inet_sk(__sk)->pinet6 : NULL;

Since sk is an IPv4 socket, pinet6 is NULL, leading to a
null pointer dereference.

This patch fixes the issue by checking if inet6_sk(sk)
returns a NULL pointer before accessing pinet6.

Signed-off-by: Debin Zhu <mowenroot@163.com>
Signed-off-by: Bitao Ouyang <1985755126@qq.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Fixes: ceba1832b1 ("calipso: Set the calipso socket label to match the secattr.")
Link: https://patch.msgid.link/20250401124018.4763-1-mowenroot@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10 14:39:33 +02:00
Florian Westphal
feb1fa2a03 netfilter: nf_tables: don't unregister hook when table is dormant
[ Upstream commit 688c15017d ]

When nf_tables_updchain encounters an error, hook registration needs to
be rolled back.

This should only be done if the hook has been registered, which won't
happen when the table is flagged as dormant (inactive).

Just move the assignment into the registration block.

Reported-by: syzbot+53ed3a6440173ddbf499@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=53ed3a6440173ddbf499
Fixes: b9703ed44f ("netfilter: nf_tables: support for adding new devices to an existing netdev chain")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10 14:39:33 +02:00
Pablo Neira Ayuso
86bd9609fd netfilter: nft_set_hash: GC reaps elements with conncount for dynamic sets only
[ Upstream commit 9d74da1177 ]

conncount has its own GC handler which determines when to reap stale
elements, this is convenient for dynamic sets. However, this also reaps
non-dynamic sets with static configurations coming from control plane.
Always run connlimit gc handler but honor feedback to reap element if
this set is dynamic.

Fixes: 290180e244 ("netfilter: nf_tables: add connlimit support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10 14:39:33 +02:00
Oliver Hartkopp
d840c84cdd can: statistics: use atomic access in hot path
[ Upstream commit 80b5f90158 ]

In can_send() and can_receive() CAN messages and CAN filter matches are
counted to be visible in the CAN procfs files.

KCSAN detected a data race within can_send() when two CAN frames have
been generated by a timer event writing to the same CAN netdevice at the
same time. Use atomic operations to access the statistics in the hot path
to fix the KCSAN complaint.

Reported-by: syzbot+78ce4489b812515d5e4d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67cd717d.050a0220.e1a89.0006.GAE@google.com
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250310143353.3242-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10 14:39:31 +02:00
Taehee Yoo
93c59b5548 net: devmem: do not WARN conditionally after netdev_rx_queue_restart()
[ Upstream commit a70f891e0f ]

When devmem socket is closed, netdev_rx_queue_restart() is called to
reset queue by the net_devmem_unbind_dmabuf(). But callback may return
-ENETDOWN if the interface is down because queues are already freed
when the interface is down so queue reset is not needed.
So, it should not warn if the return value is -ENETDOWN.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250309134219.91670-8-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10 14:39:31 +02:00
Johannes Berg
e401fa5b95 wifi: mac80211: fix SA Query processing in MLO
[ Upstream commit 9a267ce4a3 ]

When MLO is used and SA Query processing isn't done by
userspace (e.g. wpa_supplicant w/o CONFIG_OCV), then
the mac80211 code kicks in but uses the wrong addresses.
Fix them.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250306123626.bab48bb49061.I9391b22f1360d20ac8c4e92604de23f27696ba8f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10 14:39:30 +02:00
Emmanuel Grumbach
9465e09b74 wifi: mac80211: flush the station before moving it to UN-AUTHORIZED state
[ Upstream commit 43e0407717 ]

We first want to flush the station to make sure we no longer have any
frames being Tx by the station before the station is moved to
un-authorized state. Failing to do that will lead to races: a frame may
be sent after the station's state has been changed.

Since the API clearly states that the driver can't fail the sta_state()
transition down the list of state, we can easily flush the station
first, and only then call the driver's sta_state().

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250306123626.450bc40e8b04.I636ba96843c77f13309c15c9fd6eb0c5a52a7976@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10 14:39:30 +02:00
Alexander Wetzel
e0862a6d3d wifi: mac80211: remove debugfs dir for virtual monitor
[ Upstream commit 646262c71a ]

Don't call ieee80211_debugfs_recreate_netdev() for virtual monitor
interface when deleting it.

The virtual monitor interface shouldn't have debugfs entries and trying
to update them will *create* them on deletion.

And when the virtual monitor interface is created/destroyed multiple
times we'll get warnings about debugfs name conflicts.

Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de>
Link: https://patch.msgid.link/20250204164240.370153-1-Alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10 14:39:28 +02:00
Alexander Wetzel
5d42a34137 wifi: mac80211: Cleanup sta TXQs on flush
[ Upstream commit 5b999006e3 ]

Drop the sta TXQs on flush when the drivers is not supporting
flush.

ieee80211_set_disassoc() tries to clean up everything for the sta.
But it ignored queued frames in the sta TX queues when the driver
isn't supporting the flush driver ops.

Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de>
Link: https://patch.msgid.link/20250204123129.9162-1-Alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10 14:39:28 +02:00
Mark Zhang
28b21ee8e8 rtnetlink: Allocate vfinfo size for VF GUIDs when supported
[ Upstream commit 23f0080761 ]

Commit 30aad41721 ("net/core: Add support for getting VF GUIDs")
added support for getting VF port and node GUIDs in netlink ifinfo
messages, but their size was not taken into consideration in the
function that allocates the netlink message, causing the following
warning when a netlink message is filled with many VF port and node
GUIDs:
 # echo 64 > /sys/bus/pci/devices/0000\:08\:00.0/sriov_numvfs
 # ip link show dev ib0
 RTNETLINK answers: Message too long
 Cannot send link get request: Message too long

Kernel warning:

 ------------[ cut here ]------------
 WARNING: CPU: 2 PID: 1930 at net/core/rtnetlink.c:4151 rtnl_getlink+0x586/0x5a0
 Modules linked in: xt_conntrack xt_MASQUERADE nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay mlx5_ib macsec mlx5_core tls rpcrdma rdma_ucm ib_uverbs ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm iw_cm ib_ipoib fuse ib_cm ib_core
 CPU: 2 UID: 0 PID: 1930 Comm: ip Not tainted 6.14.0-rc2+ #1
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 RIP: 0010:rtnl_getlink+0x586/0x5a0
 Code: cb 82 e8 3d af 0a 00 4d 85 ff 0f 84 08 ff ff ff 4c 89 ff 41 be ea ff ff ff e8 66 63 5b ff 49 c7 07 80 4f cb 82 e9 36 fc ff ff <0f> 0b e9 16 fe ff ff e8 de a0 56 00 66 66 2e 0f 1f 84 00 00 00 00
 RSP: 0018:ffff888113557348 EFLAGS: 00010246
 RAX: 00000000ffffffa6 RBX: ffff88817e87aa34 RCX: dffffc0000000000
 RDX: 0000000000000003 RSI: 0000000000000000 RDI: ffff88817e87afb8
 RBP: 0000000000000009 R08: ffffffff821f44aa R09: 0000000000000000
 R10: ffff8881260f79a8 R11: ffff88817e87af00 R12: ffff88817e87aa00
 R13: ffffffff8563d300 R14: 00000000ffffffa6 R15: 00000000ffffffff
 FS:  00007f63a5dbf280(0000) GS:ffff88881ee00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f63a5ba4493 CR3: 00000001700fe002 CR4: 0000000000772eb0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 PKRU: 55555554
 Call Trace:
  <TASK>
  ? __warn+0xa5/0x230
  ? rtnl_getlink+0x586/0x5a0
  ? report_bug+0x22d/0x240
  ? handle_bug+0x53/0xa0
  ? exc_invalid_op+0x14/0x50
  ? asm_exc_invalid_op+0x16/0x20
  ? skb_trim+0x6a/0x80
  ? rtnl_getlink+0x586/0x5a0
  ? __pfx_rtnl_getlink+0x10/0x10
  ? rtnetlink_rcv_msg+0x1e5/0x860
  ? __pfx___mutex_lock+0x10/0x10
  ? rcu_is_watching+0x34/0x60
  ? __pfx_lock_acquire+0x10/0x10
  ? stack_trace_save+0x90/0xd0
  ? filter_irq_stacks+0x1d/0x70
  ? kasan_save_stack+0x30/0x40
  ? kasan_save_stack+0x20/0x40
  ? kasan_save_track+0x10/0x30
  rtnetlink_rcv_msg+0x21c/0x860
  ? entry_SYSCALL_64_after_hwframe+0x76/0x7e
  ? __pfx_rtnetlink_rcv_msg+0x10/0x10
  ? arch_stack_walk+0x9e/0xf0
  ? rcu_is_watching+0x34/0x60
  ? lock_acquire+0xd5/0x410
  ? rcu_is_watching+0x34/0x60
  netlink_rcv_skb+0xe0/0x210
  ? __pfx_rtnetlink_rcv_msg+0x10/0x10
  ? __pfx_netlink_rcv_skb+0x10/0x10
  ? rcu_is_watching+0x34/0x60
  ? __pfx___netlink_lookup+0x10/0x10
  ? lock_release+0x62/0x200
  ? netlink_deliver_tap+0xfd/0x290
  ? rcu_is_watching+0x34/0x60
  ? lock_release+0x62/0x200
  ? netlink_deliver_tap+0x95/0x290
  netlink_unicast+0x31f/0x480
  ? __pfx_netlink_unicast+0x10/0x10
  ? rcu_is_watching+0x34/0x60
  ? lock_acquire+0xd5/0x410
  netlink_sendmsg+0x369/0x660
  ? lock_release+0x62/0x200
  ? __pfx_netlink_sendmsg+0x10/0x10
  ? import_ubuf+0xb9/0xf0
  ? __import_iovec+0x254/0x2b0
  ? lock_release+0x62/0x200
  ? __pfx_netlink_sendmsg+0x10/0x10
  ____sys_sendmsg+0x559/0x5a0
  ? __pfx_____sys_sendmsg+0x10/0x10
  ? __pfx_copy_msghdr_from_user+0x10/0x10
  ? rcu_is_watching+0x34/0x60
  ? do_read_fault+0x213/0x4a0
  ? rcu_is_watching+0x34/0x60
  ___sys_sendmsg+0xe4/0x150
  ? __pfx____sys_sendmsg+0x10/0x10
  ? do_fault+0x2cc/0x6f0
  ? handle_pte_fault+0x2e3/0x3d0
  ? __pfx_handle_pte_fault+0x10/0x10
  ? preempt_count_sub+0x14/0xc0
  ? __down_read_trylock+0x150/0x270
  ? __handle_mm_fault+0x404/0x8e0
  ? __pfx___handle_mm_fault+0x10/0x10
  ? lock_release+0x62/0x200
  ? __rcu_read_unlock+0x65/0x90
  ? rcu_is_watching+0x34/0x60
  __sys_sendmsg+0xd5/0x150
  ? __pfx___sys_sendmsg+0x10/0x10
  ? __up_read+0x192/0x480
  ? lock_release+0x62/0x200
  ? __rcu_read_unlock+0x65/0x90
  ? rcu_is_watching+0x34/0x60
  do_syscall_64+0x6d/0x140
  entry_SYSCALL_64_after_hwframe+0x76/0x7e
 RIP: 0033:0x7f63a5b13367
 Code: 0e 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
 RSP: 002b:00007fff8c726bc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 RAX: ffffffffffffffda RBX: 0000000067b687c2 RCX: 00007f63a5b13367
 RDX: 0000000000000000 RSI: 00007fff8c726c30 RDI: 0000000000000004
 RBP: 00007fff8c726cb8 R08: 0000000000000000 R09: 0000000000000034
 R10: 00007fff8c726c7c R11: 0000000000000246 R12: 0000000000000001
 R13: 0000000000000000 R14: 00007fff8c726cd0 R15: 00007fff8c726cd0
  </TASK>
 irq event stamp: 0
 hardirqs last  enabled at (0): [<0000000000000000>] 0x0
 hardirqs last disabled at (0): [<ffffffff813f9e58>] copy_process+0xd08/0x2830
 softirqs last  enabled at (0): [<ffffffff813f9e58>] copy_process+0xd08/0x2830
 softirqs last disabled at (0): [<0000000000000000>] 0x0
 ---[ end trace 0000000000000000 ]---

Thus, when calculating ifinfo message size, take VF GUIDs sizes into
account when supported.

Fixes: 30aad41721 ("net/core: Add support for getting VF GUIDs")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250325090226.749730-1-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10 14:39:26 +02:00
Maxim Mikityanskiy
2bb139e483 netfilter: socket: Lookup orig tuple for IPv6 SNAT
commit 932b32ffd7 upstream.

nf_sk_lookup_slow_v4 does the conntrack lookup for IPv4 packets to
restore the original 5-tuple in case of SNAT, to be able to find the
right socket (if any). Then socket_match() can correctly check whether
the socket was transparent.

However, the IPv6 counterpart (nf_sk_lookup_slow_v6) lacks this
conntrack lookup, making xt_socket fail to match on the socket when the
packet was SNATed. Add the same logic to nf_sk_lookup_slow_v6.

IPv6 SNAT is used in Kubernetes clusters for pod-to-world packets, as
pods' addresses are in the fd00::/8 ULA subnet and need to be replaced
with the node's external address. Cilium leverages Envoy to enforce L7
policies, and Envoy uses transparent sockets. Cilium inserts an iptables
prerouting rule that matches on `-m socket --transparent` and redirects
the packets to localhost, but it fails to match SNATed IPv6 packets due
to that missing conntrack lookup.

Closes: https://github.com/cilium/cilium/issues/37932
Fixes: eb31628e37 ("netfilter: nf_tables: Add support for IPv6 NAT")
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-07 10:08:35 +02:00
Minjoong Kim
09691f367d atm: Fix NULL pointer dereference
commit bf2986fcf8 upstream.

When MPOA_cache_impos_rcvd() receives the msg, it can trigger
Null Pointer Dereference Vulnerability if both entry and
holding_time are NULL. Because there is only for the situation
where entry is NULL and holding_time exists, it can be passed
when both entry and holding_time are NULL. If these are NULL,
the entry will be passd to eg_cache_put() as parameter and
it is referenced by entry->use code in it.

kasan log:

[    3.316691] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006:I
[    3.317568] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[    3.318188] CPU: 3 UID: 0 PID: 79 Comm: ex Not tainted 6.14.0-rc2 #102
[    3.318601] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[    3.319298] RIP: 0010:eg_cache_remove_entry+0xa5/0x470
[    3.319677] Code: c1 f7 6e fd 48 c7 c7 00 7e 38 b2 e8 95 64 54 fd 48 c7 c7 40 7e 38 b2 48 89 ee e80
[    3.321220] RSP: 0018:ffff88800583f8a8 EFLAGS: 00010006
[    3.321596] RAX: 0000000000000006 RBX: ffff888005989000 RCX: ffffffffaecc2d8e
[    3.322112] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000030
[    3.322643] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff6558b88
[    3.323181] R10: 0000000000000003 R11: 203a207972746e65 R12: 1ffff11000b07f15
[    3.323707] R13: dffffc0000000000 R14: ffff888005989000 R15: ffff888005989068
[    3.324185] FS:  000000001b6313c0(0000) GS:ffff88806d380000(0000) knlGS:0000000000000000
[    3.325042] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.325545] CR2: 00000000004b4b40 CR3: 000000000248e000 CR4: 00000000000006f0
[    3.326430] Call Trace:
[    3.326725]  <TASK>
[    3.326927]  ? die_addr+0x3c/0xa0
[    3.327330]  ? exc_general_protection+0x161/0x2a0
[    3.327662]  ? asm_exc_general_protection+0x26/0x30
[    3.328214]  ? vprintk_emit+0x15e/0x420
[    3.328543]  ? eg_cache_remove_entry+0xa5/0x470
[    3.328910]  ? eg_cache_remove_entry+0x9a/0x470
[    3.329294]  ? __pfx_eg_cache_remove_entry+0x10/0x10
[    3.329664]  ? console_unlock+0x107/0x1d0
[    3.329946]  ? __pfx_console_unlock+0x10/0x10
[    3.330283]  ? do_syscall_64+0xa6/0x1a0
[    3.330584]  ? entry_SYSCALL_64_after_hwframe+0x47/0x7f
[    3.331090]  ? __pfx_prb_read_valid+0x10/0x10
[    3.331395]  ? down_trylock+0x52/0x80
[    3.331703]  ? vprintk_emit+0x15e/0x420
[    3.331986]  ? __pfx_vprintk_emit+0x10/0x10
[    3.332279]  ? down_trylock+0x52/0x80
[    3.332527]  ? _printk+0xbf/0x100
[    3.332762]  ? __pfx__printk+0x10/0x10
[    3.333007]  ? _raw_write_lock_irq+0x81/0xe0
[    3.333284]  ? __pfx__raw_write_lock_irq+0x10/0x10
[    3.333614]  msg_from_mpoad+0x1185/0x2750
[    3.333893]  ? __build_skb_around+0x27b/0x3a0
[    3.334183]  ? __pfx_msg_from_mpoad+0x10/0x10
[    3.334501]  ? __alloc_skb+0x1c0/0x310
[    3.334809]  ? __pfx___alloc_skb+0x10/0x10
[    3.335283]  ? _raw_spin_lock+0xe0/0xe0
[    3.335632]  ? finish_wait+0x8d/0x1e0
[    3.335975]  vcc_sendmsg+0x684/0xba0
[    3.336250]  ? __pfx_vcc_sendmsg+0x10/0x10
[    3.336587]  ? __pfx_autoremove_wake_function+0x10/0x10
[    3.337056]  ? fdget+0x176/0x3e0
[    3.337348]  __sys_sendto+0x4a2/0x510
[    3.337663]  ? __pfx___sys_sendto+0x10/0x10
[    3.337969]  ? ioctl_has_perm.constprop.0.isra.0+0x284/0x400
[    3.338364]  ? sock_ioctl+0x1bb/0x5a0
[    3.338653]  ? __rseq_handle_notify_resume+0x825/0xd20
[    3.339017]  ? __pfx_sock_ioctl+0x10/0x10
[    3.339316]  ? __pfx___rseq_handle_notify_resume+0x10/0x10
[    3.339727]  ? selinux_file_ioctl+0xa4/0x260
[    3.340166]  __x64_sys_sendto+0xe0/0x1c0
[    3.340526]  ? syscall_exit_to_user_mode+0x123/0x140
[    3.340898]  do_syscall_64+0xa6/0x1a0
[    3.341170]  entry_SYSCALL_64_after_hwframe+0x77/0x7f
[    3.341533] RIP: 0033:0x44a380
[    3.341757] Code: 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c00
[    3.343078] RSP: 002b:00007ffc1d404098 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[    3.343631] RAX: ffffffffffffffda RBX: 00007ffc1d404458 RCX: 000000000044a380
[    3.344306] RDX: 000000000000019c RSI: 00007ffc1d4040b0 RDI: 0000000000000003
[    3.344833] RBP: 00007ffc1d404260 R08: 0000000000000000 R09: 0000000000000000
[    3.345381] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
[    3.346015] R13: 00007ffc1d404448 R14: 00000000004c17d0 R15: 0000000000000001
[    3.346503]  </TASK>
[    3.346679] Modules linked in:
[    3.346956] ---[ end trace 0000000000000000 ]---
[    3.347315] RIP: 0010:eg_cache_remove_entry+0xa5/0x470
[    3.347737] Code: c1 f7 6e fd 48 c7 c7 00 7e 38 b2 e8 95 64 54 fd 48 c7 c7 40 7e 38 b2 48 89 ee e80
[    3.349157] RSP: 0018:ffff88800583f8a8 EFLAGS: 00010006
[    3.349517] RAX: 0000000000000006 RBX: ffff888005989000 RCX: ffffffffaecc2d8e
[    3.350103] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000030
[    3.350610] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff6558b88
[    3.351246] R10: 0000000000000003 R11: 203a207972746e65 R12: 1ffff11000b07f15
[    3.351785] R13: dffffc0000000000 R14: ffff888005989000 R15: ffff888005989068
[    3.352404] FS:  000000001b6313c0(0000) GS:ffff88806d380000(0000) knlGS:0000000000000000
[    3.353099] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.353544] CR2: 00000000004b4b40 CR3: 000000000248e000 CR4: 00000000000006f0
[    3.354072] note: ex[79] exited with irqs disabled
[    3.354458] note: ex[79] exited with preempt_count 1

Signed-off-by: Minjoong Kim <pwn9uin@gmail.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250322105200.14981-1-pwn9uin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-07 10:08:35 +02:00
Arthur Mongodin
2fa52cd829 mptcp: Fix data stream corruption in the address announcement
commit 2c1f97a52c upstream.

Because of the size restriction in the TCP options space, the MPTCP
ADD_ADDR option is exclusive and cannot be sent with other MPTCP ones.
For this reason, in the linked mptcp_out_options structure, group of
fields linked to different options are part of the same union.

There is a case where the mptcp_pm_add_addr_signal() function can modify
opts->addr, but not ended up sending an ADD_ADDR. Later on, back in
mptcp_established_options, other options will be sent, but with
unexpected data written in other fields due to the union, e.g. in
opts->ext_copy. This could lead to a data stream corruption in the next
packet.

Using an intermediate variable, prevents from corrupting previously
established DSS option. The assignment of the ADD_ADDR option
parameters is now done once we are sure this ADD_ADDR option can be set
in the packet, e.g. after having dropped other suboptions.

Fixes: 1bff1e43a3 ("mptcp: optimize out option generation")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Arthur Mongodin <amongodin@randorisec.fr>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
[ Matt: the commit message has been updated: long lines splits and some
  clarifications. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314-net-mptcp-fix-data-stream-corr-sockopt-v1-1-122dbb249db3@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-28 22:03:33 +01:00
Sven Eckelmann
91176c1934 batman-adv: Ignore own maximum aggregation size during RX
commit 548b0c5de7 upstream.

An OGMv1 and OGMv2 packet receive processing were not only limited by the
number of bytes in the received packet but also by the nodes maximum
aggregation packet size limit. But this limit is relevant for TX and not
for RX. It must not be enforced by batadv_(i)v_ogm_aggr_packet to avoid
loss of information in case of a different limit for sender and receiver.

This has a minor side effect for B.A.T.M.A.N. IV because the
batadv_iv_ogm_aggr_packet is also used for the preprocessing for the TX.
But since the aggregation code itself will not allow more than
BATADV_MAX_AGGREGATION_BYTES bytes, this check was never triggering (in
this context) prior of removing it.

Cc: stable@vger.kernel.org
Fixes: c6c8fea297 ("net: Add batman-adv meshing protocol")
Fixes: 9323158ef9 ("batman-adv: OGMv2 - implement originators logic")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-28 22:03:31 +01:00
Gavrilov Ilia
130290f44b xsk: fix an integer overflow in xp_create_and_assign_umem()
commit 559847f567 upstream.

Since the i and pool->chunk_size variables are of type 'u32',
their product can wrap around and then be cast to 'u64'.
This can lead to two different XDP buffers pointing to the same
memory area.

Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.

Fixes: 94033cd8e7 ("xsk: Optimize for aligned case")
Cc: stable@vger.kernel.org
Signed-off-by: Ilia Gavrilov <Ilia.Gavrilov@infotecs.ru>
Link: https://patch.msgid.link/20250313085007.3116044-1-Ilia.Gavrilov@infotecs.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-28 22:03:31 +01:00
Guillaume Nault
a3ff812d68 Revert "gre: Fix IPv6 link-local address generation."
[ Upstream commit fc486c2d06 ]

This reverts commit 183185a18f.

This patch broke net/forwarding/ip6gre_custom_multipath_hash.sh in some
circumstances (https://lore.kernel.org/netdev/Z9RIyKZDNoka53EO@mini-arch/).
Let's revert it while the problem is being investigated.

Fixes: 183185a18f ("gre: Fix IPv6 link-local address generation.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/8b1ce738eb15dd841aab9ef888640cab4f6ccfea.1742418408.git.gnault@redhat.com
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-28 22:03:28 +01:00
Lin Ma
250793874f net/neighbor: add missing policy for NDTPA_QUEUE_LENBYTES
[ Upstream commit 90a7138619 ]

Previous commit 8b5c171bb3 ("neigh: new unresolved queue limits")
introduces new netlink attribute NDTPA_QUEUE_LENBYTES to represent
approximative value for deprecated QUEUE_LEN. However, it forgot to add
the associated nla_policy in nl_ntbl_parm_policy array. Fix it with one
simple NLA_U32 type policy.

Fixes: 8b5c171bb3 ("neigh: new unresolved queue limits")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://patch.msgid.link/20250315165113.37600-1-linma@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-28 22:03:28 +01:00