Commit graph

13,657 commits

Author SHA1 Message Date
Kunal Gangakhedkar
e3d2530a6c ALSA: hda - Add PCI quirk for HP dv6-1110ax.
Adding this PCI quirk fixes the board config detection.
This also fixes jack sensing by using "hp_detect=1" via properly detected
board config.

Signed-off-by: Kunal Gangakhedkar <kunal.gangakhedkar@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-21 09:33:11 +01:00
Julia Lawall
fc8aa7b16a sound/oss/vidc.c: change the field used with DMA_ACTIVE
The constant DMA_ACTIVE is defined with the dma_buffparams structure rather
than with the audio_operations structure.  Takashi Iwai suggested that the
dmap_out field of the audio_operations structure should be used instead.

This is not tested.

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-21 09:32:09 +01:00
Mark Brown
4ca612ebdb Merge branch 'for-2.6.34' into for-2.6.35 2010-03-19 19:39:23 +00:00
Guennadi Liakhovetski
b2dfa62c52 ASoC: remove a card from the list, if instantiation failed
If instantiation of a card failed, we still have to remove it from the
card list on unregistration. This fixes an Oops on Migo-R, triggering,
when after a failed firmware load attempt the driver modules are removed
and re-inserted again.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19 19:39:18 +00:00
Daniel Mack
fd23b7dee5 ASoC: move dma_data from snd_soc_dai to snd_soc_pcm_stream
This fixes a memory corruption when ASoC devices are used in
full-duplex mode. Specifically for pxa-ssp code, where this pointer
is dynamically allocated for each direction and destroyed upon each
stream start.

All other platforms are fixed blindly, I couldn't even compile-test
them. Sorry for any breakage I may have caused.

Reported-by: Sven Neumann <s.neumann@raumfeld.com>
Reported-by: Michael Hirsch <m.hirsch@raumfeld.com>
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19 19:37:29 +00:00
Daniel Mack
8727b909bb ASoC: pxa-pcm-lib: initialize DMA channel to -1
This fixes a warning ("pxa_free_dma: trying to free channel 0 which is
already freed") when a device was opened but the hw_params() call
failed.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19 15:28:04 +00:00
Mark Brown
093208f5d0 ASoC: Hook up microphone jack detection on 1133-EV1 board
Note that since all the microphones share a bias there is a single
jack exported for all three, even though there are two physical
connectors plus the soldered down silicon mic.  Note also that the SiMic
is always present by default.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-19 14:09:05 +00:00
Mark Brown
a655b96c24 Merge branch 'topic/jack' into for-2.6.35 2010-03-19 12:48:10 +00:00
Barry Song
698c375666 ASoC: change bf5xx-ad1938 machine driver to bf5xx-ad193x machine driver
Signed-off-by: Barry Song <21cnbao@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19 12:47:34 +00:00
Mark Brown
cffce322be ASoC: Unexport AD193x bus probe/remove functions
The export is not needed since the per-bus code lives in the same
module.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-19 12:22:03 +00:00
Barry Song
a1533d94c6 ASoC: rename ad1938 to ad193x and add support for ad1936/7/8/9
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Yi Li <yi.li@analog.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19 12:12:16 +00:00
Misael Lopez Cruz
8ecbabd977 ASoC: TWL6040: Add twl6040 codec driver
Initial version of TWL6040 codec driver.

The TWL6040 codec uses a proprietary PDM-based digital audio interface.
Audio paths supported are:

- Input: Main Mic, Sub Mic, Headset Mic, Auxiliary-FM Left/Right
- Output: Headset Left/Right, Handsfree Left/Right

TWL6040 codec supports power-up/down manual and automatic sequence.
Manual sequence is done through a specific register writes sequence.
Automatic sequence is done when the codec is powered-up through the
external AUDPWRON line. The completion of the sequence is signaled
through the audio interrupt.

TWL6040 codec sysclk can be provided by: low-power or high
performance PLL:

- The low-power PLL takes a low-frequency input at 32,768 Hz and
generates an approximate of 17.64 or 19.2 MHz (for 44.1 KHz and 48 KHz
respectively)

- The high-performance PLL generates an exact 19.2 MHz clock signal
from high-frequency input at 12/19.2/26/38.4 MHz.

Low-power playback mode is a special scenario where only headset path
(headset DAC and driver) is active.

For the particular case of headset path, PLL being used defines the
headset power mode: low-power, high-performance.

Signed-off-by: Misael Lopez Cruz <x0052729@ti.com>
Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19 11:29:33 +00:00
Mark Brown
6937c947d3 ASoC: Bail out of wm_hubs DC servo if calibration fails
We're keeping track of the number of times we've iterated but never
actually using this to bail out if the chip looks stuck.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-19 11:17:36 +00:00
Peter Ujfalusi
fdb6b1e195 ASoC: tlv320dac33: Internal clocking changes
During validation of the internal clocking setup it has
been found that the following settings were not configured
in an optimal way:

ASRC_CTRL_A: SRCLKDIV was incorrect, instad of divide ratio 3,
             ratio of 2 has to be used (as the comment stated)
DAC_CTRL_A: Fs = Fsref is the desired configuration instead of
            Fs = Fsref / 1.5

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19 11:17:24 +00:00
Peter Ujfalusi
44f497b4e0 ASoC: tlv320dac33: Fix DSP modes
To make DSP_A mode working correctly the data delay should be
configured to 0. DSP_B mode thus can not be used with DAC33,
so remove it.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19 11:17:24 +00:00
Mark Brown
27648b2f1c ASoC: Correct typoed Mic2 connections on 1133-EV1 board
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19 11:15:42 +00:00
Peter Ujfalusi
299a151f53 ASoC: omap-mcbsp: Add support for Left Justified format
Basic support for Left Justified coding for OMAP McBSP.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19 11:14:39 +00:00
Jorge Eduardo Candelaria
9fc71e8f58 ASoC: McPDM: Use tabs for indentation
Indentation in initial support for McPDM driver was converted to spaces.
Use tabs to comply with open source coding-style.

Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19 11:14:39 +00:00
Kailang Yang
c027ddcd01 ALSA: hda - Add alc_codec_rename() helper
Added alc_codec_rename() helper for renaming codec->chip_name.
Added Acer-specific codec naming for ALC269/662.

[Clean-up and refactoring by tiwai]

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-19 11:40:53 +01:00
Kailang Yang
da00c24493 ALSA: hda - Add parse customize define function for Realtek codecs
Added alc_auto_parse_customize_define() to parse the Realtek-specific
attributes from SKU.  Also enable beep controls only when the proper
attribute bit is set.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-19 11:38:53 +01:00
Kailang Yang
6ff86a3f33 ALSA: hda - Take internal mic as Front Mic
Add new check for MIC. Do the internal DMIC as the Front MIC.
It could solve the default record source index issue.

[Fix the check properly using the bitmask by tiwai]

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-19 11:14:36 +01:00
Justin P. Mattock
b7a5633ab3 fix comment typo in sound/pci/hda/hda_local.h
I think this should be automatic pin instead of ping.
(but could be wrong).

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-19 11:00:58 +01:00
Linus Torvalds
01da47059a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  sound: sequencer: clean up remove bogus check
  ALSA: hda: Use LPIB and 6stack-dig for eMachines T5212
  ALSA: hda - Disable MSI for Nvidia controller
  ALSA: hda - Add PCI quirks for MSI NetOn AP1900 and Wind Top AE2220
  ALSA: hda - Fix secondary ADC of ALC260 basic model
  ALSA: hda - Add an error message for invalid mapping NID
  ALSA: hda - New Intel HDA controller
2010-03-18 16:48:19 -07:00
Guennadi Liakhovetski
da3b062e30 ASoC: SIU driver shall select FW_LOADER
The SIU ASoC driver must load firmware to program the DSP, therefore it
has to select FW_LOADER in its Kconfig entry.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-18 11:31:13 +00:00
Barry Song
f4bee1bb00 ASoC: soc-cache: let reg be AND'ed by 0xff instead of data buffer for 8_8 mode
The registers for AD193X are defined as 0x800-0x810 for spi which uses
16_8 mode, for i2c to support AD1937, we will use 8_8 mode, only the low
byte of 0x800-0x810 is valid.  The patch will not destory other codecs,
but make soc cache interface more useful.

Signed-off-by: Barry Song <barry.song@analog.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-18 11:23:23 +00:00
Cliff Cai
85dfcdffc2 ASoC: soc-cache: add i2c read entry for 8_8 mode
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Barry Song <barry.song@analog.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-18 11:23:15 +00:00
Mark Brown
ebb812cb8d ALSA: Add support for key reporting via the jack interface
Some devices provide support for detection of a small number of
buttons on their jacks. One common implementation provides a single
button, implemented by shorting the microphone to ground and detected
along with microphone presence detection by detecting varying current
draws on the microphone bias signal.

Provide support for up to three buttons via the jack interface. These
default to reporting BTN_n but an API is provided to allow these to
be remapped to other keys by the machine driver where it knows what
the keys are. More keys can be added with ease if required.

This is only intended to support simple accessory button designs. If
the interface is limiting then either creating a child device for the
accessory or accessing the input device in the jack directly is
recommended.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-17 18:10:46 +00:00
Mark Brown
1c6e555c3a ALSA: Rename jack switch table in preparation for button support
Avoids confusion when we have button support.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-17 18:10:44 +00:00
Mark Brown
dd76769dd5 ASoC: Refresh WM8750 bias management
The WM8750 is using some delayed work to manage the ramping of the bias
at startup and resume out of line from the normal flow.  This predates
the support within ASoC core for moving the resume out of line from the
main system resume which provides equivalent functionality with better
interaction with applications.  Change to doing the ramp in line to make
use of the core functionality.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-17 14:09:02 +00:00
Mark Brown
a6c65736bc ASoC: Remove current PGA control handling
A code audit reveals that there are currently no users of the widget
controls on PGAs. This is likely to continue to be the case since
while there are useful things that can be done with integrating the
PGA gain and mute controls with the power sequencing userspace
generally wants stereo controls for output stages which this doesn't
map onto well.

In preparation for implementing something more useful strip out the
existing code, leaving the parameters there for use by the new code.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 14:08:31 +00:00
Mark Brown
2a0761a35b ASoC: Implement WM835x microphone jack detection support
The WM8350 provides microphone presence and short circuit detection.
Integrate this with the ASoC jack reporting API.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 09:27:19 +00:00
Takashi Iwai
e04dd2d21b Merge branch 'fix/hda' into for-linus 2010-03-17 09:01:38 +01:00
Takashi Iwai
2a5e00ed14 Merge branch 'fix/misc' into for-linus 2010-03-17 09:01:33 +01:00
Mark Brown
fbc2dae854 ASoC: Support GPIO based microphone detection for WM8904
The WM8904 allows microphone detection signals to be brought out as
alternate functions of the GPIO signals which can be detected using
interrupt inputs on the CPU. Allow this to be configured using
platform data.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-16 16:03:30 +00:00
Mark Brown
cdce4e9ba7 ASoC: Allow configuration of WM8904 GPIO pin functions
Provide platform data allowing the configuration of the GPIO pins
on the WM8904 to be selected, allowing alternate functions to be
enabled.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-16 15:58:08 +00:00
Mark Brown
7245387e36 ASoC: Implement interrupt driven microphone detection for WM8903
Support use of the WM8903 IRQ for reporting of microphone presence
and short detection.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-16 15:57:43 +00:00
Mark Brown
8abd16a65d ASoC: Add WM8903 interrupt support
Currently used to detect completion of the write sequencer.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-16 15:57:15 +00:00
Mark Brown
37f88e8407 ASoC: Initial WM8903 microphone bias and short detection
Provide support for WM8903 microphone presence and short detection
using the GPIOs to route out a logic signal suitable for handling
using snd_soc_jack_add_gpios() on the processor GPIOs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-16 15:56:54 +00:00
Mark Brown
73b34ead74 ASoC: Add GPIO configuration support for WM8903
Allow users to pass in a default configuration for the GPIOs of
the WM8903 as platform data. This allows configuration of the pin
muxing of the device.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-16 15:56:34 +00:00
Mark Brown
da34183e64 ASoC: Allow pins to be force enabled
Allow pins to be forced on regardless of their power state. This is
intended for use with microphone bias supplies which need to be
enabled in order to support microphone detection - in systems without
appropriate hardware leaving the microphone unbiased when not in use
saves power.

The force done at power check time in order to avoid disrupting other
power detection logic.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-16 15:56:10 +00:00
Thomas Weber
8839316121 Fix typos in comments
[Ss]ytem => [Ss]ystem
udpate => update
paramters => parameters
orginal => original

Signed-off-by: Thomas Weber <swirl@gmx.li>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-16 11:47:56 +01:00
Dan Carpenter
fb40b496ad sound: sequencer: clean up remove bogus check
A few lines earlier bend is limited to 2399.  So semitones is always
less than 24 here.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-16 07:52:13 +01:00
Takashi Iwai
a9104f9899 Merge branch 'topic/misc' into fix/misc 2010-03-16 07:50:49 +01:00
Daniel T Chen
572c0e3c73 ALSA: hda: Use LPIB and 6stack-dig for eMachines T5212
BugLink: https://bugs.launchpad.net/bugs/538895

The OR has verified that both position_fix=1 and model=6stack-dig are
necessary to have capture function properly. (The existing 3stack-6ch
model quirk seems to be incorrect.)

Reported-by: Reuben Bailey <reuben.e.bailey@gmail.com>
Tested-by: Reuben Bailey <reuben.e.bailey@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-16 07:46:31 +01:00
Takashi Iwai
80c43ed724 ALSA: hda - Disable MSI for Nvidia controller
Judging from the member of enable_msi white-list, Nvidia controller
seems to cause troubles with MSI enabled, e.g. boot hang up or other
serious issue may come up.  It's safer to disable MSI as default for
Nvidia controllers again for now.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>
2010-03-15 15:51:53 +01:00
Mark Brown
b4452d1fbf ASoC: Remove version display from WM8750
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-15 11:07:12 +00:00
Anisse Astier
b43f6e5e25 ALSA: hda - Add PCI quirks for MSI NetOn AP1900 and Wind Top AE2220
This should make the speakers and jack detection work on MSI all-in-one
computers NetOn AP1900 and Wind Top AE2220.

Signed-off-by: Anisse Astier <anisse@astier.eu>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-15 09:11:45 +01:00
Takashi Iwai
9c4cc0bded ALSA: hda - Fix secondary ADC of ALC260 basic model
Fix adc_nids[] for ALC260 basic model to match with num_adc_nids.
Otherwise you get an invalid NID in the secondary "Input Source" mixer
element.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>
2010-03-15 09:07:52 +01:00
Takashi Iwai
28d1a85e13 ALSA: hda - Add an error message for invalid mapping NID
Add an error message to snd_hda_add_nid() for invalid mapping NID to make
easier to hunt the buggy code.

Also added a missing space to the error message in snd_hda_build_controls()

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-15 09:06:38 +01:00
Vitaliy Kulikov
c602c8ad45 ALSA: hda - New Intel HDA controller
Added a PCI controller id on new Dell laptops.

Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-15 09:01:26 +01:00