Move the entire NX-842 driver for the pSeries platform from the file
nx-842.c to nx-842-pseries.c. This is required by later patches that
add NX-842 support for the PowerNV platform.
This patch does not alter the content of the pSeries NX-842 driver at
all, it only changes the filename.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change the crypto 842 compression alg to use the software 842 compression
and decompression library. Add the crypto driver_name as "842-generic".
Remove the fallback to LZO compression.
Previously, this crypto compression alg attemped 842 compression using
PowerPC hardware, and fell back to LZO compression and decompression if
the 842 PowerPC hardware was unavailable or failed. This should not
fall back to any other compression method, however; users of this crypto
compression alg can fallback if desired, and transparent fallback tricks
callers into thinking they are getting 842 compression when they actually
get LZO compression - the failure of the 842 hardware should not be
transparent to the caller.
The crypto compression alg for a hardware device also should not be located
in crypto/ so this is now a software-only implementation that uses the 842
software compression/decompression library.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add 842-format software compression and decompression functions.
Update the MAINTAINERS 842 section to include the new files.
The 842 compression function can compress any input data into the 842
compression format. The 842 decompression function can decompress any
standard-format 842 compressed data - specifically, either a compressed
data buffer created by the 842 software compression function, or a
compressed data buffer created by the 842 hardware compressor (located
in PowerPC coprocessors).
The 842 compressed data format is explained in the header comments.
This is used in a later patch to provide a full software 842 compression
and decompression crypto interface.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the asm ICSWX and ICSWEPX opcodes. Add definitions for the
Coprocessor Request structures needed to use the icswx calls to
coprocessors. Add icswx() function to perform the ICSWX asm
using the provided Coprocessor Command Word value and
Coprocessor Request Block structure.
This is required for communication with the NX-842 coprocessor on
a PowerNV system.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Export the of_get_ibm_chip_id() function. This will be used by the
PowerNV NX-842 driver.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This adds a couple of test cases for CRC32 (not CRC32c) to
ensure that the generic and arch specific implementations
are in sync.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Failure return from dlpar_configure_connector when dlpar adding cpus
results in leaking references to the cpus parent device node. Move the
call to of_node_put() prior to checking the result of
dlpar_configure_connector.
Fixes: 8d5ff32076 ("powerpc/pseries: Make dlpar_configure_connector parent node aware")
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The irq_domain_ops are not modified by the driver and the irqdomain core
code accepts pointer to a const data.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Since many boards for ARM, experimental or server alike, will
feature LEDs, let's include LED class and trigger support for
heartbeat and CPU in the defconfig. Many systems (such as the
ARM Juno) will use a system controller "syscon" to access the
LED registers, so include support for this as well.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This defines the Juno "APB system registers" as a syscon device,
and all the LEDs controlled by the APB system registers right
below it using the syscon LEDs driver on top of syscon. Define
LED0 for heartbeat, LED1 for MMC0 activity and the following
four LEDs indicating CPU activity using the Linux-specific
DT bindings for triggers.
This is the pattern and same drivers as used on the legacy
platform device trees for the ARM Integrators and the RealView
PB1176.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Tested-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Currently syscon LEDs will traverse the device tree looking for syscon devices
and if found, traverse any subnodes of these to identify matching children
and from there instantiate LED class devices.
This is not a good use of the Linux device model. Instead we have converted the
device trees to add the "simple-mfd" property to the MFD nexi spawning syscon
LEDs so that these will appear as platform devices in the system and we can
use the proper device probing mechanism.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Integrators and the RealView use simple MFD devices with register bit
LEDs as subnodes, update these to use the "simple-mfd" compatible property
so that subdevices get spawned from the MFD nexi.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This defines a new compatible option for MFD devices "simple-mfd" that will
make the OF core spawn child devices for all subnodes of that MFD device.
It is optional but handy for things like syscon and possibly other
simpler MFD devices.
Since there was no file to put the documentation in, I took this opportunity
to make a small writeup on MFD devices and add the compatible definition
there.
Suggested-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Devicetree <devicetree@vger.kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Note that from now on any of the pfc8575 gpio keys will wake up the
system, as the pfc8575 cannot mask individual interrupts.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Spansion s25fl512s is compatible with "nor-jedec". Hence add the
"nor-jedec" compatible value, so the driver can bind against the generic
name, cfr. commit 8ff16cf77c ("Documentation: devicetree: m25p80:
add "nor-jedec" binding").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Spansion s25fl008k is compatible with "nor-jedec". Hence add the
"nor-jedec" compatible value, so the driver can bind against the generic
name, cfr. commit 8ff16cf77c ("Documentation: devicetree: m25p80:
add "nor-jedec" binding").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Spansion s25fl512s is compatible with "nor-jedec". Hence add the
"nor-jedec" compatible value, so the driver can bind against the generic
name, cfr. commit 8ff16cf77c ("Documentation: devicetree: m25p80:
add "nor-jedec" binding").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Spansion s25fl008k is compatible with "nor-jedec". Hence add the
"nor-jedec" compatible value, so the driver can bind against the generic
name, cfr. commit 8ff16cf77c ("Documentation: devicetree: m25p80:
add "nor-jedec" binding").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Spansion s25fl512s is compatible with "nor-jedec". Hence add the
"nor-jedec" compatible value, so the driver can bind against the generic
name, cfr. commit 8ff16cf77c ("Documentation: devicetree: m25p80:
add "nor-jedec" binding").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Link the external IRQ controller irqc0 to the IRQC module clock, so it
can be power managed using that clock.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Link the external IRQ controller irqc0 to the IRQC module clock, so it
can be power managed using that clock.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Link the external IRQ controller irqc0 to the IRQC module clock, so it
can be power managed using that clock.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Link the external IRQ controllers irqc0 and irqc1 to the IRQC module
clock, so they can be power managed using that clock.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[horms: corrected typo in changelog to refer to r8a73a4]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Commit:
51bb92843e ("x86/asm/entry: Remove SYSCALL_VECTOR")
Converted most uses of SYSCALL_VECTOR to IA32_SYSCALL_VECTOR, but
forgot about lguest.
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1431185813-15413-4-git-send-email-brgerst@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Makes the situation much more regular - we avoid a strange state
when the element just after the top of stack is used to store
struct path of symlink, but isn't counted in nd->depth. This
is much more regular, so the normal failure exits, etc., work
fine.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Just store it in nd->stack[nd->depth].link right in pick_link().
Now that we make sure of stack expansion in pick_link(), we can
do so...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... and don't open-code unlazy_walk() in there - the only reason
for that is to avoid verfication of cached nd->root, which is
trivially avoided by discarding said cached nd->root first.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
rather than letting the callers handle the jump-to-root part of
semantics, do it right in get_link() and return the rest of the
body for the caller to deal with - at that point it's treated
the same way as relative symlinks would be. And return NULL
when there's no "rest of the body" - those are treated the same
as pure jump symlink would be.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Instead of saving name and branching to OK:, where we'll immediately restore
it, and call walk_component() with WALK_PUT|WALK_GET and nd->last_type being
LAST_BIND, which is equivalent to put_link(nd), err = 0, we can just treat
that the same way we'd treat procfs-style "jump" symlinks - do put_link(nd)
and move on.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
when cookie is NULL, put_link() is equivalent to path_put(), so
as soon as we'd set last->cookie to NULL, we can bump nd->depth and
let the normal logics in terminate_walk() to take care of cleanups.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>