Commit graph

533,133 commits

Author SHA1 Message Date
Brian Norris
5ca1b0dd01 of: unittest: Add option string test case with longer path
There were regressions seen with commit 106937e8cc ("of: fix handling
of '/' in options for of_find_node_by_path()"), where we couldn't handle
extra '/' before the ':'. Let's test for this now.

Confirmed that this test fails without the previous patch and passes
when patched. All other tests pass.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
2015-03-19 08:39:44 -05:00
Laurent Pinchart
d7c146053d of/irq: Fix of_irq_parse_one() returned error codes
The error code paths that require cleanup use a goto to jump to the
cleanup code and return an error code. However, the error code variable
res, which is initialized to -EINVAL when declared, is then overwritten
with the return value of of_parse_phandle_with_args(), and reused as the
return code from of_irq_parse_one(). This leads to an undetermined error
being returned instead of the expected -EINVAL value. Fix it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: stable@vger.kernel.org # 3.13+
Signed-off-by: Rob Herring <robh@kernel.org>
2015-03-19 08:39:14 -05:00
Christoph Hellwig
e27829dc92 scsi: serialize ->rescan against ->remove
Lock the device embedded in the scsi_device to protect against
concurrent calls to ->remove.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2015-03-19 06:38:43 -07:00
Eliad Peller
48e6775168 iwlwifi: mvm: take IWL_MVM_REF_UCODE_DOWN before restarting hw
we unref IWL_MVM_REF_UCODE_DOWN on iwl_mvm_restart_complete().

Usually, the restart is initiated by iwl_mvm_nic_restart(),
which takes the reference before restarting the hw.

However, in D3 flow we might call ieee80211_restart_hw()
directly (in case of suspend error and on d3_test-resume),
which without taking the ref first. fix it.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-19 15:06:28 +02:00
Eran Harary
28c8c19a00 iwlwifi: mvm: don't wait for firmware verification
The firmware has a race in the flow that indicates the
completion of the authentication. Checking the completion
of the authentication is not really needed anyway since
we can wait for the ALIVE notification instead.
Remove the unneeded and buggy code.

Signed-off-by: Eran Harary <eran.harary@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-19 15:03:14 +02:00
Oren Givon
132fee0626 iwlwifi: add new 3165 series PCI IDs
Add new 3165 PCI IDs for new 1x1 cards.

Signed-off-by: Oren Givon <oren.givon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-19 14:53:43 +02:00
Johannes Berg
dcbc17ad7c iwlwifi: mvm: protect rate scaling against non-mvm IBSS stations
When the driver callback returns that it's out of space for new
stations, the mac80211 IBSS code still keeps the station so it
doesn't try to add it over and over again.

Since the rate scaling algorithm is separate in mac80211, it also
invokes the rate scaling algorithm for such stations. It doesn't
know that our rate scaling algorithm is tightly integrated with
the MVM code and relies on those data structures, and it cannot
as the abstraction doesn't allow for it.

This leads to crashes when the rate scaling algorithm tries to
use uninitialized data, notably the mvmsta->vif pointer.

Protect against this in the rate scaling algorithm. We cannot get
good rates with such peers anyway since the firmware cannot do
anything with them.

This should fix https://bugzilla.kernel.org/show_bug.cgi?id=93461

CC: <stable@vger.kernel.org>
Reported-by: Richard Taylor <rjt-kernel@thegrindstone.me.uk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-19 14:53:35 +02:00
Emmanuel Grumbach
9c8928f517 iwlwifi: dvm: run INIT firmware again upon .start()
The assumption before this patch was that we don't need to
run again the INIT firmware after the system booted. The
INIT firmware runs calibrations which impact the physical
layer's behavior.
Users reported that it may be helpful to run these
calibrations again every time the interface is brought up.
The penatly is minimal, since the calibrations run fast.
This fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=94341

CC: <stable@vger.kernel.org>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-19 14:53:23 +02:00
Benjamin Gaignard
de4b00b093 drm: sti: convert driver to atomic modeset
v1: This patch does the minimum to make sti driver use atomic helpers.
No big bang, only adapt some functions to new call order.

v2: Use dpms and page flip atomic helpers

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2015-03-19 13:35:16 +01:00
Redha Gouicem
ec523735e4 Staging: lustre: lnet: lnet: router.c: fix useless returns and elses
This patch removes useless returns and elses.

Signed-off-by: Redha Gouicem <redha.gouicem@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-19 13:25:32 +01:00
Redha Gouicem
e6157b1b19 Staging: lustre: lnet: lnet: router.c: fix 80 char line limit
This patch fixes lines longer than the 80 char limit.

Signed-off-by: Redha Gouicem <redha.gouicem@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-19 13:25:32 +01:00
Fabian Frederick
b24062bda7 ALSA: aoa: constify of_device_id array
of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-19 12:11:13 +01:00
Ard Biesheuvel
4a97abd443 arm64/crypto: issue aese/aesmc instructions in pairs
This changes the AES core transform implementations to issue aese/aesmc
(and aesd/aesimc) in pairs. This enables a micro-architectural optimization
in recent Cortex-A5x cores that improves performance by 50-90%.

Measured performance in cycles per byte (Cortex-A57):

                CBC enc         CBC dec         CTR
  before        3.64            1.34            1.32
  after         1.95            0.85            0.93

Note that this results in a ~5% performance decrease for older cores.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-19 10:43:57 +00:00
Mark Rutland
b63dbef93f arm64: fixmap: check idx is definitely valid
Fixmap indices are in the interval (FIX_HOLE, __end_of_fixed_addresses),
but in __set_fixmap we only check idx <= __end_of_fixed_addresses, and
therefore indices <= FIX_HOLE are erroneously accepted. If called with
such an idx, __set_fixmap may corrupt page tables outside of the fixmap
region.

This patch ensures that we validate the idx against both endpoints of
the interval.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-19 10:43:57 +00:00
Mark Rutland
19fc577579 arm64: fixmap: make FIX_TEXT_POKE0 permanent
The FIX_TEXT_POKE0 is currently at the end of the temporary fixmap
slots, despite the fact that it can be used at any point during runtime
(e.g. for poking the text of loaded modules), and thus should be a
permanent fixmap slot (as is the case on arm and x86).

This patch moves FIX_TEXT_POKE0 into the set of permanent fixmap slots.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-19 10:43:56 +00:00
Daniel Borkmann
e6a2e1b6c2 arm64: mm: unexport set_memory_ro and set_memory_rw
This effectively unexports set_memory_ro and set_memory_rw functions from
commit 11d91a770f ("arm64: Add CONFIG_DEBUG_SET_MODULE_RONX support").

No module user of those is in mainline kernel and we explicitly do not want
modules to use these functions, as they i.e. RO-protect eBPF (interpreted and
JIT'ed) images from malicious modifications/bugs.

Outside of eBPF scope, I believe also other set_memory_* functions should
be unexported on arm64 due to non-existant mainline module user. Laura
mentioned that they have some uses for modules doing set_memory_*, but
none that are in mainline and it's unclear if they would ever get there.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-19 10:43:56 +00:00
Alexander Graf
a8fcd8b192 arm64: Enable CONFIG_COMPAT also for 64k page size
With binutils 2.25 the default alignment for 32bit arm sections changed to
have everything 64k aligned. Armv7 binaries built with this binutils version
run successfully on an arm64 system.

Since effectively there is now the chance to run armv7 code on arm64 even
with 64k page size, it doesn't make sense to block people from enabling
CONFIG_COMPAT on those configurations.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-19 10:43:56 +00:00
Andreas Schwab
18ccb0cab4 arm64: fix implementation of mmap2 compat syscall
The arm mmap2 syscall takes the offset in units of 4K, thus with 64K pages
the offset needs to be scaled to units of pages.

Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
[will: removed redundant lr parameter, localised PAGE_SHIFT #if check]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-19 10:43:51 +00:00
Laurent Pinchart
c6169e49bd drm: adv7511: Refactor power management
Remove the internal dependency on DPMS mode for power management by
using a by a powered state boolean instead, and use the new power off
handler at probe time. This ensure that the regmap cache is properly
marked as dirty when the device is probed, and the registers properly
synced during the first power up.

As a side effect this removes the initialization of current_edid_segment
at probe time, as the field will be initialized when the device is
powered on, at the latest right before reading EDID data.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Christian Kohn <christian.kohn@xilinx.com>
Tested-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
2015-03-19 12:28:55 +02:00
Laurent Pinchart
a5241289c4 drm: adv7511: Fix nested sleep when reading EDID
The EDID read code waits for the read completion interrupt to occur
using wait_event_interruptible(). The condition passed to the macro
reads I2C registers. This results in sleeping with the task state set
to TASK_INTERRUPTIBLE, triggering a WARN_ON() introduced in commit
8eb23b9f35 ("sched: Debug nested sleeps").

Fix this by reworking the EDID read code. Instead of checking whether
the read is complete through I2C reads, handle the interrupt registers
in the interrupt handler and update a new edid_read flag accordingly. As
a side effect both the IRQ and polling code paths now process the
interrupt sources through the same code path, simplifying the code.

Cc: stable@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-03-19 12:28:55 +02:00
Laurent Pinchart
2e96206c4f drm: adv7511: Fix DDC error interrupt handling
The DDC error interrupt bit is located in REG_INT1, not REG_INT0. Update
both the interrupt wait code and the interrupt sources reset code
accordingly.

Cc: stable@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-03-19 12:28:55 +02:00
NeilBrown
6b7a783ebd mmc: pwrseq_simple: fix error path in mmc_pwrseq_simple_alloc
The current error-path code (when gpiod_get_index() reports
an error) can never free pwrseq->reset_gpios[0], but might
try to tree pwrseq->reset_gpios[-1], which has unfortunate
consequences.

Signed-off-by: NeilBrown <neil@brown.name>
Fixes: 934f1f4833
Acked-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reported-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
2015-03-19 11:26:35 +01:00
Pablo Neira Ayuso
4017a7ee69 netfilter: restore rule tracing via nfnetlink_log
Since fab4085 ("netfilter: log: nf_log_packet() as real unified
interface"), the loginfo structure that is passed to nf_log_packet() is
used to explicitly indicate the logger type you want to use.

This is a problem for people tracing rules through nfnetlink_log since
packets are always routed to the NF_LOG_TYPE logger after the
aforementioned patch.

We can fix this by removing the trace loginfo structures, but that still
changes the log level from 4 to 5 for tracing messages and there may be
someone relying on this outthere. So let's just introduce a new
nf_log_trace() function that restores the former behaviour.

Reported-by: Markus Kötter <koetter@rrzn.uni-hannover.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-03-19 11:14:48 +01:00
Gregory CLEMENT
292a3546b9 ARM: mvebu: Conform L2CC node with ePAPR specification by adding cache-level
For L2 cache controller node, cache-level property is mandatory. Let's
add it to Armada 370 and Armada XP device tree.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-03-19 11:07:47 +01:00
Nadav Haklai
b7f01842bc ARM: mvebu: clk: remove cpuclk resources overlapping coredivclk registers on Armada XP
The resources of the cpuclk node are overlapping the one from
coredivclk node. It was not noticed until now because the driver did a
simple of_iomap and not a request_mem_region. This patch fixes it.

[gregory.clement@free-electrons.com: add commit log and port to 4.0-rc]
Signed-off-by: Nadav Haklai <nadavh@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-03-19 11:04:15 +01:00
Laurent Pinchart
6dbe686b59 drm: rcar-du: Enable the atomic updates API
Set the DRIVER_ATOMIC flag to enable usage of the atomic updates API
with the driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-03-19 12:00:22 +02:00
Laurent Pinchart
3515a9a20a drm: rcar-du: Don't initialize event->pipe field
The field is set by drm_send_vblank_event(), there's no need to
preinitialize it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-03-19 12:00:21 +02:00
Laurent Pinchart
de115fac73 drm: rcar-du: Fix framebuffer reference leak through plane state
Plane state duplication takes a reference to the framebuffer stored in
the state, but state destroy doesn't release it. This causes a reference
leak. Fix it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-03-19 12:00:21 +02:00
Joe Perches
343e0d2b58 MAINTAINERS: Remove rcar-du.h entry
commit 2378ad1228 ("drm: rcar-du: Remove platform data support")
removed the file, remove the pattern.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-03-19 12:00:21 +02:00
Michal Kazior
8bad8dcd0c ath10k: strip qos data bit always
NativeWifi tx mode expects QoS Data frames to be
delivered as Data frames with QoS part (e.g. tid)
being delievered out-of-band in fw tx command.

The QoS bit wasn't stripped before submitting to
firmware.

Stripping fixes two known problems:

 * qca6174 IOT with some APs, e.g.
   Cisco AIR-AP 1252 (which would crash after
   ath10k association). Some ath9k APs would
   crash as well.

 * sniffing own tx frames via radiotap because,
   e.g. wireshark was seeing QoS bit set but
   since QoS Control was stripped in ath10k it
   would parse beginning of LLC/SNAP

>From debugability point of view this removes the
ability to distinguish QoS from non-QoS frames
when sniffing own tx via radiotap. On the other
hand frames can be now parsed correctly without
special software modification.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-19 11:22:41 +02:00
Andy Shevchenko
a4dd4ddd4b gpio: dwapb: enable for Quark
The Intel Quark SoC contains the DW GPIO on board. While fixing the build error
the commit 1972c97db5 (gpio: dwapb: fix compile errors) disables the
possibility to build the driver on X86, i.e. Intel Quark.

The patch reenables it for Intel Quark as well.

Since we have Intel Quark SoC introduced in 4.0-rc1 I would like to make this
fix available there as well, though the actual MFD driver [1] is applied only
for next version.

[1] https://lkml.org/lkml/2015/2/1/217

Fixes: 1972c97db5 (gpio: dwapb: fix compile errors)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-19 09:46:05 +01:00
Rafael J. Wysocki
1ecb016e18 gpio / ACPI: Use local variable instead of ACPI_HANDLE()
In acpi_gpiochip_request_interrupts() the handle local
variable already contains the value that we want to pass
to acpi_walk_resources(), so it is better to use that
variable instead of evaluating ACPI_HANDLE() once more
for the same device.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-19 09:46:04 +01:00
Rafael J. Wysocki
4d8440b93c gpio / ACPI: Avoid unnecessary checks in __gpiod_get_index()
If dev is NULL in __gpiod_get_index() and both ACPI and OF are
enabled, it will be checked twice before the code decides to give
up with DT/ACPI lookup, so avoid that.

Also use the observation that ACPI_COMPANION() is much more efficient
than ACPI_HANDLE(), because the latter uses the former and carries out
a check and a pointer dereference on top of it, so replace the
ACPI_HANDLE() check with an ACPI_COMPANION() one which does not
require the additional IS_ENABLED(CONFIG_ACPI) check too.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-19 09:46:04 +01:00
Linus Walleij
964cb34188 gpio: move pincontrol calls to <linux/gpio/driver.h>
These functions do not belong in <asm-generic/gpio.h> since the
split into separate GPIO headers under <linux/gpio/*>. Move them
to <linux/gpio/driver.h> as is apropriate.

Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-19 09:45:54 +01:00
qipeng.zha
4de60970ab gpiolib: translate pin number in GPIO ACPI callbacks
If GPIO driver use pin mapping, need to translate pin number
between ACPI table and GPIO driver.

This issue is found on one platform with Cherryview gpio
controller, kernel is hang when executed _PS0 method of
one ACPI device, since without this translation, it access
invalid gpiodesc array.

Verified it works again with this patch.

Signed-off-by: qipeng.zha <qipeng.zha@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-19 09:22:53 +01:00
Stefan Agner
e4c02dced9 pinctrl: tegra: use signed bitfields for optional fields
Optional fields are set to -1 by various preprocessor macros. Make
sure the fields can actually store them.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-19 09:20:17 +01:00
Dave Airlie
6b94aea01d Merge branch 'drm_next' of https://github.com/markyzq/kernel-drm-rockchip into drm-next
rockchip fixes.

* 'drm_next' of https://github.com/markyzq/kernel-drm-rockchip:
  drm/rockchip: vop: power off until vop standby take effect
  drm/rockchip: vop: set vop enabled after enable iommu
  drm/rockchip: vop use is_enabled instead of dpms mode
  drm/rockchip: vop: fix vop vsync/hsync polarity
  drm/rockchip: Only alloc a kmap for fbdev gem object
2015-03-19 14:05:53 +10:00
Dave Airlie
d79dc0a9ba Merge tag 'topic/drm-misc-2015-03-18' of git://anongit.freedesktop.org/drm-intel into drm-next
Another drm-misch pull request. Mostly the fbdev sizes deconfusion series
from Rob, everything else is small stuff all over. And the large i2c over
aux transfers patch, too.

* tag 'topic/drm-misc-2015-03-18' of git://anongit.freedesktop.org/drm-intel:
  drm: check that planes types are correct while initializing CRTC
  drm: change connector to tmp_connector
  drm: Fix some typo mistake of the annotations
  drm: Silence sparse warnings
  drm: %pF is only for function pointers
  drm/fb: handle tiled connectors better
  drm/fb: small cleanup
  drm/rockchip: use correct fb width/height
  drm/exynos: use correct fb width/height
  drm/cma: use correct fb width/height
  drm/atomic: minor kerneldoc typo fix
  drm/fb: document drm_fb_helper_surface_size
  drm/dp: Use large transactions for I2C over AUX
  drm/plane-helper: Fixup mismerge
  drm/atomic: Constify a bunch of functions pointer structs
2015-03-19 14:03:39 +10:00
Dave Airlie
4a87b99080 Merge branch 'drm-fixes-4.0' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
single radeon fix.

* 'drm-fixes-4.0' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: drop ttm two ended allocation
2015-03-19 14:02:15 +10:00
Dave Airlie
31a55cf145 Merge branch 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Some urgent regression fixes to booting failures Exynos DRM occured.

   Summary:
   - Fix two urgent null pointer dereference bugs in case of enabling
     or disabling IOMMU. There was two cases to these issues.
     One is that plane->crtc is accessed by exynos_disable_plane()
     when device tree binding is broken so device driver tries
     to release, which means that the mode set operation isn't invoked yet
     so plane->crtc is still NULL and exynos_disable_plane() will access
     NULL pointer. This issue is fixed by checking if the plane->crtc
     is NULL or not in exynos_disable_plane()

     Other is that fimd_wait_for_vblank() is called to avoid from page fault
     with IOMMU before the ctx object is created. At this time,
     fimd_wait_for_vblank() tries to access ctx->crtc but the ctx->crtc
     is still NULL because exynos_drm_crtc_create() isn't called yet.
     This issue is fixed by creating a crtc object and setting it to
     ctx->crtc prior to fimd_wait_for_vblank() call.

     For more details, you can refer to below an e-mail thread,
     http://www.spinics.net/lists/linux-samsung-soc/msg42436.html

   - Remove unnecessary file not used and fix trivial issues.

* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: fix the initialization order in FIMD
  drm/exynos: fix typo config name correctly.
  drm/exynos: Check for NULL dereference of crtc
  drm/exynos: IS_ERR() vs NULL bug
  drm/exynos: remove unused files
2015-03-19 14:01:42 +10:00
Bruno Prémont
4eebd5a4e7 apple-gmux: lock iGP IO to protect from vgaarb changes
As GMUX depends on IO for iGP to be enabled and active, lock the IO at
vgaarb level. This should prevent GPU driver for dGPU to disable IO for
iGP while it tries to own legacy VGA IO.

This fixes usage of backlight control combined with closed nvidia
driver on some Apple dual-GPU (intel/nvidia) systems.

On those systems loading nvidia driver disables intel IO decoding,
disabling the gmux backlight controls as a side effect.
Prior to commits moving boot_vga from (optional) efifb to less optional
vgaarb this mis-behavior could be avoided by using right kernel config
(efifb enabled but vgaarb disabled).

This patch explicitly does not try to trigger vgaarb changes in order
to avoid confusing already running graphics drivers. If IO has been
mis-configured by vgaarb gmux will thus fail to probe.
It is expected to load/probe gmux prior to graphics drivers.

Fixes: ce027dac59 # nvidia interaction
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=86121
Reported-by: Petri Hodju <petrihodju@yahoo.com>
Tested-by: Petri Hodju <petrihodju@yahoo.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2015-03-18 20:44:44 -07:00
Nicholas Mc Guire
8421596407 ide_tape: convert jiffies with jiffies_to_msecs
Use jiffies_to_msecs for converting jiffies as it handles all of the corner
cases reliably and also helps readability. The printk format is fixed up
as jiffies_to_msecs returns unsigned int not unsigned long.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18 23:25:57 -04:00
Wu Fengguang
de1cf8a7d7 net/mlx4_en: mlx4_en_set_tx_maxrate() can be static
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18 23:21:41 -04:00
Jörg Thalheim
af615762e9 bridge: add ageing_time, stp_state, priority over netlink
Signed-off-by: Jörg Thalheim <joerg@higgsboson.tk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18 23:21:06 -04:00
David S. Miller
99c4a26a15 net: Fix high overhead of vlan sub-device teardown.
When a networking device is taken down that has a non-trivial number
of VLAN devices configured under it, we eat a full synchronize_net()
for every such VLAN device.

This is because of the call chain:

	NETDEV_DOWN notifier
	--> vlan_device_event()
		--> dev_change_flags()
		--> __dev_change_flags()
		--> __dev_close()
		--> __dev_close_many()
		--> dev_deactivate_many()
			--> synchronize_net()

This is kind of rediculous because we already have infrastructure for
batching doing operation X to a list of net devices so that we only
incur one sync.

So make use of that by exporting dev_close_many() and adjusting it's
interfaace so that the caller can fully manage the batch list.  Use
this in vlan_device_event() and all the overhead goes away.

Reported-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18 22:52:56 -04:00
Eric Dumazet
738e6d30d3 inet: add a schedule point in inet_twsk_purge()
On a large hash table, we can easily spend seconds to
walk over all entries. Add a cond_resched() to yield
cpu if necessary.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18 22:38:13 -04:00
Ondrej Zary
8d006e0105 Revert "net: cx82310_eth: use common match macro"
This reverts commit 11ad714b98 because
it breaks cx82310_eth.

The custom USB_DEVICE_CLASS macro matches
bDeviceClass, bDeviceSubClass and bDeviceProtocol
but the common USB_DEVICE_AND_INTERFACE_INFO matches
bInterfaceClass, bInterfaceSubClass and bInterfaceProtocol instead, which are
not specified.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18 22:37:38 -04:00
David Ahern
db19170bc0 rocker: add support for phys_port_name
Implement the phys_port_name operation. Port names are pulled from the
rocker hardware model in qemu and default to the qemu name + port id.
e.g.,

sw1p1: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 52:54:00:12:35:01  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

where 'sw1' comes from the qemu command line -device rocker,name=sw1, and
'p1' is port 1.

Patch is adapted from Scott's phys_port_id patch.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18 22:30:35 -04:00
David Ahern
db24a9044e net: add support for phys_port_name
Similar to port id allow netdevices to specify port names and export
the name via sysfs. Drivers can implement the netdevice operation to
assist udev in having sane default names for the devices using the
rule:

$ cat /etc/udev/rules.d/80-net-setup-link.rules
SUBSYSTEM=="net", ACTION=="add", ATTR{phys_port_name}!="",
NAME="$attr{phys_port_name}"

Use of phys_name versus phys_id was suggested-by Jiri Pirko.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18 22:30:35 -04:00
David S. Miller
3c08158e0e sparc: Fix /proc/kcore
/proc/kcore investigates the "System RAM" elements in /proc/iomem to
initialize it's memory tables.  Therefore we have to register them
before it tries to do so.  kcore uses device_initcall() so let's
use arch_initcall() for the registry.

Also we need ARCH_PROC_KCORE_TEXT to get the virtual addresses of
the kernel image correct.

Reported-by: David Ahern <david.ahern@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18 19:15:28 -07:00