Commit graph

533,133 commits

Author SHA1 Message Date
Axel Lin
ecd5fb026d phy: exynos5-usbdrd: Fix off-by-one valid value checking for args->args[0]
Current code uses args->args[0] as array subscript of phy_drd->phys[].
So the valid value range for args->args[0] is 0 ... EXYNOS5_DRDPHYS_NUM - 1.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-13 17:14:36 +05:30
Oleg Nesterov
f4c3686386 x86/fpu: Drop_fpu() should not assume that tsk equals current
drop_fpu() does clear_used_math() and usually this is correct
because tsk == current.

However switch_fpu_finish()->restore_fpu_checking() is called before
__switch_to() updates the "current_task" variable. If it fails,
we will wrongly clear the PF_USED_MATH flag of the previous task.

So use clear_stopped_child_used_math() instead.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pekka Riikonen <priikone@iki.fi>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150309171041.GB11388@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-13 12:44:29 +01:00
Oleg Nesterov
a7c80ebcac x86/fpu: Avoid math_state_restore() without used_math() in __restore_xstate_sig()
math_state_restore() assumes it is called with irqs disabled,
but this is not true if the caller is __restore_xstate_sig().

This means that if ia32_fxstate == T and __copy_from_user()
fails, __restore_xstate_sig() returns with irqs disabled too.

This triggers:

  BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:41
   dump_stack
   ___might_sleep
   ? _raw_spin_unlock_irqrestore
   __might_sleep
   down_read
   ? _raw_spin_unlock_irqrestore
   print_vma_addr
   signal_fault
   sys32_rt_sigreturn

Change __restore_xstate_sig() to call set_used_math()
unconditionally. This avoids enabling and disabling interrupts
in math_state_restore(). If copy_from_user() fails, we can
simply do fpu_finit() by hand.

[ Note: this is only the first step. math_state_restore() should
        not check used_math(), it should set this flag. While
	init_fpu() should simply die. ]

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pekka Riikonen <priikone@iki.fi>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150307153844.GB25954@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-13 12:44:28 +01:00
Thierry Reding
2f1bce487c phy: Find the right match in devm_phy_destroy()
devm_phy_create() stores the pointer to the new PHY at the address
returned by devres_alloc(). The res parameter passed to devm_phy_match()
is therefore the location where the pointer to the PHY is stored, hence
it needs to be dereferenced before comparing to the match data in order
to find the correct match.

Cc: <stable@vger.kernel.org> # v3.13+
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-13 17:13:52 +05:30
Martin Schwidefsky
e143fa93c2 s390/mm: limit STACK_RND_MASK for compat tasks
For compat tasks the mmap randomization does not use the maximum
randomization value from mmap_rnd_mask but the fixed value of 0x7ff.
This needs to be respected in the definition of STACK_RND_MASK as
well.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-03-13 12:15:45 +01:00
Heiko Carstens
20e76ee184 s390/ftrace: fix compile error if CONFIG_KPROBES is disabled
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-03-13 12:15:44 +01:00
Hendrik Brueckner
0a64815091 s390/cpum_sf: add diagnostic sampling event only if it is authorized
The SF_CYCLES_BASIC_DIAG is always registered even if it is turned of in the
current hardware configuration.  Because diagnostic-sampling is typically not
turned on in the hardware configuration, do not register this perf event by
default.  Enable it only if the diagnostic-sampling function is authorized.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-03-13 12:15:44 +01:00
Bard Liao
b52551e0d0 ASoC: rt5645: Remove adc stereo2 filter
Remove adc stereo2 filter since it is not in rt5645/rt5650 codec.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-13 11:13:16 +00:00
Herbert Xu
d8bdff59ce netfilter: Fix potential crash in nft_hash walker
When we get back an EAGAIN from rhashtable_walk_next we were
treating it as a valid object which obviously doesn't work too
well.

Luckily this is hard to trigger so it seems nobody has run into
it yet.

This patch fixes it by redoing the next call when we get an EAGAIN.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-03-13 12:03:00 +01:00
Sebastian Andrzej Siewior
69364727be perf data: Add tracepoint events fields CTF conversion support
Adding support to convert tracepoint event fields into CTF
event fields.

We parse each tracepoint event for CTF conversion and add
tracepoint fields as regular CTF event fields, so they
appear in babeltrace output like:

  $ babeltrace ./ctf-data/
  ...
  [09:02:00.950703057] (+?.?????????) sched:sched_stat_runtime: { }, { perf_ip = ... SNIP ... common_type = 298, common_flags = 1, \
  common_preempt_count = 0, common_pid = 31813, comm = "perf", pid = 31813, runtime = 458800, vruntime = 52059858071 }
  ...

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1424470628-5969-6-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-13 07:47:49 -03:00
Daniel Drake
6576fe4afc Bluetooth: btusb: Add helper for READ_LOCAL_VERSION command
Multiple codepaths duplicate some simple code to read and
sanity-check local version information. Before I add a couple more
such codepaths, add a helper to reduce duplication.

Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-13 12:47:48 +02:00
Namhyung Kim
65f46e0214 perf kmem: Fix alignment of slab result table
Its table was a bit misaligned.  Fix it.

Before:

  # perf kmem stat --caller -l 10
  ------------------------------------------------------------------------------------------------------
   Callsite                           | Total_alloc/Per | Total_req/Per   | Hit      | Ping-pong | Frag
  ------------------------------------------------------------------------------------------------------
   radeon_cs_parser_init.part.1+11a   |      2080/260   |      1504/188   |        8 |        0 | 27.692%
   radeon_cs_parser_init.part.1+e1    |       384/96    |       288/72    |        4 |        0 | 25.000%
   radeon_cs_parser_init.part.1+93    |       128/32    |        96/24    |        4 |        0 | 25.000%
   load_elf_binary+a39                |       512/512   |       392/392   |        1 |        0 | 23.438%
   __alloc_skb+89                     |      6144/877   |      4800/685   |        7 |        6 | 21.875%
   radeon_fence_emit+5c               |      1152/192   |       912/152   |        6 |        0 | 20.833%
   radeon_cs_parser_relocs+ad         |      8192/2048  |      6624/1656  |        4 |        0 | 19.141%
   radeon_sa_bo_new+78                |      1280/64    |      1120/56    |       20 |        0 | 12.500%
   load_elf_binary+2c4                |        32/32    |        28/28    |        1 |        0 | 12.500%
   anon_vma_prepare+101               |       576/72    |       512/64    |        8 |        0 | 11.111%
   ...                                | ...             | ...             | ...    | ...      | ...
  ------------------------------------------------------------------------------------------------------

After:

  ---------------------------------------------------------------------------------------------------------
   Callsite                           | Total_alloc/Per | Total_req/Per   | Hit      | Ping-pong | Frag
  ---------------------------------------------------------------------------------------------------------
   radeon_cs_parser_init.part.1+11a   |      2080/260   |      1504/188   |        8 |         0 | 27.692%
   radeon_cs_parser_init.part.1+e1    |       384/96    |       288/72    |        4 |         0 | 25.000%
   radeon_cs_parser_init.part.1+93    |       128/32    |        96/24    |        4 |         0 | 25.000%
   load_elf_binary+a39                |       512/512   |       392/392   |        1 |         0 | 23.438%
   __alloc_skb+89                     |      6144/877   |      4800/685   |        7 |         6 | 21.875%
   radeon_fence_emit+5c               |      1152/192   |       912/152   |        6 |         0 | 20.833%
   radeon_cs_parser_relocs+ad         |      8192/2048  |      6624/1656  |        4 |         0 | 19.141%
   radeon_sa_bo_new+78                |      1280/64    |      1120/56    |       20 |         0 | 12.500%
   load_elf_binary+2c4                |        32/32    |        28/28    |        1 |         0 | 12.500%
   anon_vma_prepare+101               |       576/72    |       512/64    |        8 |         0 | 11.111%
   ...                                | ...             | ...             | ...      | ...       | ...
  ---------------------------------------------------------------------------------------------------------

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1426145571-3065-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-13 07:47:48 -03:00
Namhyung Kim
bd72a33eba perf kmem: Allow -v option
Current perf kmem fails when -v option is used.  As it's very useful for
debugging, let's allow it.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1426145571-3065-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-13 07:47:48 -03:00
Namhyung Kim
405f87557d perf kmem: Fix segfault when invalid sort key is given
When it tries to free 'str', it was already updated by strsep() - so it
needs to save the original pointer.

  # perf kmem stat -s xxx,hit
    Error: Unknown --sort key: 'xxx'
  *** Error in `perf': free(): invalid pointer: 0x0000000000e9e7b6 ***
  ======= Backtrace: =========
  /usr/lib/libc.so.6(+0x7198e)[0x7fc7e6e0d98e]
  /usr/lib/libc.so.6(+0x76dee)[0x7fc7e6e12dee]
  /usr/lib/libc.so.6(+0x775cb)[0x7fc7e6e135cb]
  ./perf[0x44a1b5]
  ./perf[0x490b20]
  ./perf(parse_options_step+0x173)[0x491773]
  ./perf(parse_options_subcommand+0xa7)[0x491fb7]
  ./perf(cmd_kmem+0x2bc)[0x44ae4c]
  ./perf[0x47aa13]
  ./perf(main+0x60a)[0x427a9a]
  /usr/lib/libc.so.6(__libc_start_main+0xf0)[0x7fc7e6dbc800]
  ./perf(_start+0x29)[0x427bb9]

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1426145571-3065-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-13 07:47:47 -03:00
Andi Kleen
7910352852 perf stat: Always correctly indent ratio column
When cycles or instructions do not print anything, as in being,
--per-socket or --per-core modi, the ratio column was not correctly
indented for them. This lead to some ratios not lining up with the
others. Always indent correctly when nothing is printed.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1426087682-22765-3-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-13 07:47:44 -03:00
Andi Kleen
56f0fd45d8 perf stat: Fix IPC and other formulas with -A
perf stat didn't compute the IPC and other formulas for individual CPUs
with -A. Fix this for the easy -A case. As before, --per-core and
--per-socket do not handle it, they simply print nothing.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1426087682-22765-2-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-13 07:46:10 -03:00
Andi Kleen
d73515c03c perf stat: Output running time and run/enabled ratio in CSV mode
The information how much a counter ran in 'perf stat' can be quite
interesting for other tools to judge how trustworthy a measurement is.

Currently it is only output in non CSV mode.

This patches make perf stat always output the running time and the
enabled/running ratio in CSV mode.

This adds two new fields at the end for each line. I assume that
existing tools ignore new fields at the end, so it's on by default.

Only CSV mode is affected, no difference otherwise.

v2: Add extra print_running function
v3: Avoid printing nan
v4: Remove some elses and add brackets.
v5: Move non CSV case into print_running

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1426083387-17006-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-13 07:46:04 -03:00
Wei Yongjun
b52104e509 arm/arm64: KVM: fix missing unlock on error in kvm_vgic_create()
Add the missing unlock before return from function kvm_vgic_create()
in the error handling case.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-03-13 11:40:57 +01:00
Julia Lawall
05713ba905 crypto: don't export static symbol
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
type T;
identifier f;
@@

static T f (...) { ... }

@@
identifier r.f;
declarer name EXPORT_SYMBOL_GPL;
@@

-EXPORT_SYMBOL_GPL(f);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-13 21:37:15 +11:00
Stephan Mueller
19e60e1392 crypto: testmgr - fix RNG return code enforcement
Due to the change to RNGs to always return zero in success case, the
invocation of the RNGs in the test manager must be updated as otherwise
the RNG self tests are not properly executed any more.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Alexander Bergmann <abergmann@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-13 21:37:15 +11:00
Stephan Mueller
ccfe8c3f7e crypto: aesni - fix memory usage in GCM decryption
The kernel crypto API logic requires the caller to provide the
length of (ciphertext || authentication tag) as cryptlen for the
AEAD decryption operation. Thus, the cipher implementation must
calculate the size of the plaintext output itself and cannot simply use
cryptlen.

The RFC4106 GCM decryption operation tries to overwrite cryptlen memory
in req->dst. As the destination buffer for decryption only needs to hold
the plaintext memory but cryptlen references the input buffer holding
(ciphertext || authentication tag), the assumption of the destination
buffer length in RFC4106 GCM operation leads to a too large size. This
patch simply uses the already calculated plaintext size.

In addition, this patch fixes the offset calculation of the AAD buffer
pointer: as mentioned before, cryptlen already includes the size of the
tag. Thus, the tag does not need to be added. With the addition, the AAD
will be written beyond the already allocated buffer.

Note, this fixes a kernel crash that can be triggered from user space
via AF_ALG(aead) -- simply use the libkcapi test application
from [1] and update it to use rfc4106-gcm-aes.

Using [1], the changes were tested using CAVS vectors to demonstrate
that the crypto operation still delivers the right results.

[1] http://www.chronox.de/libkcapi.html

CC: Tadeusz Struk <tadeusz.struk@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-13 21:32:21 +11:00
Wenyou Yang
0ab285c2fa ARM: at91/pm_slowclock: create the procedure to handle the sdram self-refresh
To decrease the duplicated code, create the procedure
to contain both activing and exiting the sdram self-refresh mode.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13 11:12:07 +01:00
Sylvain Rochet
d18c570ef3 ARM: at91/pm_slowclock: remove clocks which are already stopped when entering slow clock mode
Assume USB PLL and PLL B are already stopped before entering sleep mode.

Removed PLL B from slow clock code, all drivers are supposed to properly
unprepare clocks.

Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
Acked-by: Wenyou.Yang <wenyou.yang@atmel.com>
[nicolas.ferre@atmel.com: remove the warning printed in pm.c]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13 11:12:06 +01:00
Wenyou Yang
09fc78a601 ARM: at91/pm: remove CONFIG_AT91_SLOW_CLOCK config option
The slow clock always exists, selecting CONFIG_AT91_SLOW_CLOCK config
is unnecessary for the suspend to memory mode.
For this mode the master clock should always switch to the slow clock.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13 11:12:06 +01:00
Wenyou Yang
896bc871a4 ARM: at91: move "select SRAM" under SOC_AT91SAM9 and SOC_SAMA5
To simply the PM config the CONFIG_AT91_SLOW_CLOCK option will be removed,
so move "select SRAM" from under AT91_SLOW_CLOCK, add "select SRAM if PM"
under SOC_AT91SAM9 and SOC_SAMA5

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13 11:12:05 +01:00
Wenyou Yang
05d5970c72 ARM: at91/pm_slowclock: remove the unused code related with SLOWDOWN_MASTER_CLOCK
The SLOWDOWN_MASTER_CLOCK definition is not used, remove the redundant code.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13 11:11:57 +01:00
Marcel Holtmann
238be788fc Bluetooth: Introduce hci_dev_test_and_set_flag helper macro
Instead of manually coding test_and_set_bit on hdev->dev_flags all the
time, use hci_dev_test_and_set_flag helper macro.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-13 12:09:33 +02:00
Marcel Holtmann
a69d892726 Bluetooth: Introduce hci_dev_test_and_clear_flag helper macro
Instead of manually coding test_and_clear_bit on hdev->dev_flags all the
time, use hci_dev_test_and_clear_flag helper macro.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-13 12:09:32 +02:00
Marcel Holtmann
516018a9c0 Bluetooth: Introduce hci_dev_test_and_change_flag helper macro
Instead of manually coding test_and_change_bit on hdev->dev_flags all the
time, use hci_dev_test_and_change_flag helper macro.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-13 12:09:31 +02:00
Marcel Holtmann
ce05d603af Bluetooth: Introduce hci_dev_change_flag helper macro
Instead of manually coding change_bit on hdev->dev_flags all the time,
use hci_dev_change_flag helper macro.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-13 12:09:29 +02:00
Marcel Holtmann
a358dc11d8 Bluetooth: Introduce hci_dev_clear_flag helper macro
Instead of manually coding clear_bit on hdev->dev_flags all the time,
use hci_dev_clear_flag helper macro.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-13 12:09:27 +02:00
Marcel Holtmann
a1536da255 Bluetooth: Introduce hci_dev_set_flag helper macro
Instead of manually coding set_bit on hdev->dev_flags all the time,
use hci_dev_set_flag helper macro.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-13 12:09:26 +02:00
Marcel Holtmann
d7a5a11d7f Bluetooth: Introduce hci_dev_test_flag helper macro
Instead of manually coding test_bit on hdev->dev_flags all the time,
use hci_dev_test_flag helper macro.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-13 12:09:25 +02:00
Marcel Holtmann
cc91cb042c Bluetooth: Add support connectable advertising setting
The patch adds a second advertising setting that allows switching of the
controller into connectable mode independent of the global connectable
setting.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-13 12:07:54 +02:00
Julia Lawall
dc0961bc81 ARM: cns3xxx: don't export static symbol
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
type T;
identifier f;
@@

static T f (...) { ... }

@@
identifier r.f;
declarer name EXPORT_SYMBOL;
@@

-EXPORT_SYMBOL(f);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Krzysztof Halasa <khalasa@piap.pl>
2015-03-13 11:02:15 +01:00
Torsten Fleischer
bdf6c79278 dmaengine: at_hdmac: Fix calculation of the residual bytes
This patch fixes the following issues regarding to the calculation of the
residue:

1. The residue is always calculated for the current transfer even if the
cookie is associated to a pending transfer.

2. For scatter/gather DMA the calculation of the residue for the current
transfer doesn't include the bytes of the child descriptors that are already
transferred.
It only calculates the difference between the transfer's total length minus
the number of bytes that are already transferred for the current child
descriptor.
For example: There is a scatter/gather DMA transfer with a total length of
1 MByte. Getting the residue several times while the transfer is running shows
something like that:

1: residue = 975584
2: residue = 1002766
3: residue = 992627
4: residue = 983767
5: residue = 985694
6: residue = 1008094
7: residue = 1009741
8: residue = 1011195

3. The driver stores the residue but never resets it when starting a new
transfer.
For example: If there are two subsequent DMA transfers. The first one with
a total length of 1 MByte and the second one with a total length of 1 kByte.
Getting the residue for both transfers shows something like that:

transfer 1: residue = 975584
transfer 2: residue = 1048380

Changes from V1:
   * Fixed coding style of the multi-line comments.
   * Improved accuracy of the residue calculation when the transfer for the
     first descriptor is active.

Changes from V2:
   * Member 'tx_width' of 'struct at_desc' restored, because the transfer width
     can't be derived from the source width when using "slave_sg".
     The transfer width is needed for the calculation of the residue if either
     the transfer of the first or the last descriptor is in progress.
     In the case of a "memory_to_memory_sg" transfer (part of this patch
     series) the transfer width of both descriptors may differ. Thus it is
     required to additionally set 'tx_width' of the last descriptor.
   * Added functions for multiply used calculations.

Signed-off-by: Torsten Fleischer <torfl6749@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-13 14:58:31 +05:30
Torsten Fleischer
265567fbca dmaengine: at_hdmac: Add support for memory to memory sg transfers
This patch adds support for memory to memory scatter-gather transfers.

Changes from V1:
   * Fixed coding style of the multi-line comments.

Changes from V2:
   * Added setup of 'desc->tx_width' that is needed to calculate the
     residue.

Signed-off-by: Torsten Fleischer <torfl6749@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-13 14:57:54 +05:30
Scott Wood
2ee762b348 drm: %pF is only for function pointers
Use %pS for actual addresses, otherwise you'll get bad output
on arches like ppc64 where %pF expects a function descriptor.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-13 10:17:38 +01:00
Cristina Opriceana
7aa5d5097d Staging: rtl8192u: Use __packed instead of __attribute__((packed))
This patch fixed the following checkpatch.pl warning:
"WARNING: __packed is preferred over __attribute__((packed))".

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-13 10:06:45 +01:00
Greg Kroah-Hartman
91ca9ed797 Staging: lustre: fix space issue in workitem.c
This patch fixes a space issue in the workitem.c file

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-13 10:06:45 +01:00
Leon Yu
d415a7f1c1 perf: Fix context leak in put_event()
Commit:

  a83fe28e2e ("perf: Fix put_event() ctx lock")

changed the locking logic in put_event() by replacing mutex_lock_nested()
with perf_event_ctx_lock_nested(), but didn't fix the subsequent
mutex_unlock() with a correct counterpart, perf_event_ctx_unlock().

Contexts are thus leaked as a result of incremented refcount
in perf_event_ctx_lock_nested().

Signed-off-by: Leon Yu <chianglungyu@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: a83fe28e2e ("perf: Fix put_event() ctx lock")
Link: http://lkml.kernel.org/r/1424954613-5034-1-git-send-email-chianglungyu@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-13 10:02:18 +01:00
John Stultz
fba9e07208 clocksource: Rename __clocksource_updatefreq_*() to __clocksource_update_freq_*()
Ingo requested this function be renamed to improve readability,
so I've renamed __clocksource_updatefreq_scale() as well as the
__clocksource_updatefreq_hz/khz() functions to avoid
squishedtogethernames.

This touches some of the sh clocksources, which I've not tested.

The arch/arm/plat-omap change is just a comment change for
consistency.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1426133800-29329-13-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-13 08:07:08 +01:00
John Stultz
8cc8c525ad clocksource: Add some debug info about clocksources being registered
Print the mask, max_cycles, and max_idle_ns values for
clocksources being registered.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1426133800-29329-12-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-13 08:07:07 +01:00
John Stultz
3142f76022 clocksource, sparc32: Convert to using clocksource_register_hz()
While cleaning up some clocksource code, I noticed the
time_32 implementation uses the clocksource_hz2mult()
helper, but doesn't use the clocksource_register_hz()
method.

I don't believe the Sparc clocksource is a default
clocksource, so we shouldn't need to self-define
the mult/shift pair.

So convert the time_32.c implementation to use
clocksource_register_hz().

Untested.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1426133800-29329-11-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-13 08:07:07 +01:00
John Stultz
f8935983f1 clocksource: Mostly kill clocksource_register()
A long running project has been to clean up remaining uses
of clocksource_register(), replacing it with the simpler
clocksource_register_khz/hz() functions.

However, there are a few cases where we need to self-define
our mult/shift values, so switch the function to a more
obviously internal __clocksource_register() name, and
consolidate much of the internal logic so we don't have
duplication.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: David S. Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1426133800-29329-10-git-send-email-john.stultz@linaro.org
[ Minor cleanups. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-13 08:07:06 +01:00
John Stultz
0b046b217a clocksource: Improve clocksource watchdog reporting
The clocksource watchdog reporting has been less helpful
then desired, as it just printed the delta between
the two clocksources. This prevents any useful analysis
of why the skew occurred.

Thus this patch tries to improve the output when we
mark a clocksource as unstable, printing out the cycle
last and now values for both the current clocksource
and the watchdog clocksource. This will allow us to see
if the result was due to a false positive caused by
a problematic watchdog.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1426133800-29329-9-git-send-email-john.stultz@linaro.org
[ Minor cleanups of kernel messages. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-13 08:07:06 +01:00
John Stultz
4ca22c2648 timekeeping: Add warnings when overflows or underflows are observed
It was suggested that the underflow/overflow protection
should probably throw some sort of warning out, rather
than just silently fixing the issue.

So this patch adds some warnings here. The flag variables
used are not protected by locks, but since we can't print
from the reading functions, just being able to say we
saw an issue in the update interval is useful enough,
and can be slightly racy without real consequence.

The big complication is that we're only under a read
seqlock, so the data could shift under us during
our calculation to see if there was a problem. This
patch avoids this issue by nesting another seqlock
which allows us to snapshot the just required values
atomically. So we shouldn't see false positives.

I also added some basic rate-limiting here, since
on one build machine w/ skewed TSCs it was fairly
noisy at bootup.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1426133800-29329-8-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-13 08:07:05 +01:00
John Stultz
057b87e316 timekeeping: Try to catch clocksource delta underflows
In the case where there is a broken clocksource
where there are multiple actual clocks that
aren't perfectly aligned, we may see small "negative"
deltas when we subtract 'now' from 'cycle_last'.

The values are actually negative with respect to the
clocksource mask value, not necessarily negative
if cast to a s64, but we can check by checking the
delta to see if it is a small (relative to the mask)
negative value (again negative relative to the mask).

If so, we assume we jumped backwards somehow and
instead use zero for our delta.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1426133800-29329-7-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-13 08:07:05 +01:00
John Stultz
a558cd021d timekeeping: Add checks to cap clocksource reads to the 'max_cycles' value
When calculating the current delta since the last tick, we
currently have no hard protections to prevent a multiplication
overflow from occuring.

This patch introduces infrastructure to allow a cap that
limits the clocksource read delta value to the 'max_cycles' value,
which is where an overflow would occur.

Since this is in the hotpath, it adds the extra checking under
CONFIG_DEBUG_TIMEKEEPING=y.

There was some concern that capping time like this could cause
problems as we may stop expiring timers, which could go circular
if the timer that triggers time accumulation were mis-scheduled
too far in the future, which would cause time to stop.

However, since the mult overflow would result in a smaller time
value, we would effectively have the same problem there.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1426133800-29329-6-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-13 08:07:04 +01:00
John Stultz
3c17ad19f0 timekeeping: Add debugging checks to warn if we see delays
Recently there's been requests for better sanity
checking in the time code, so that it's more clear
when something is going wrong, since timekeeping issues
could manifest in a large number of strange ways in
various subsystems.

Thus, this patch adds some extra infrastructure to
add a check to update_wall_time() to print two new
warnings:

 1) if we see the call delayed beyond the 'max_cycles'
    overflow point,

 2) or if we see the call delayed beyond the clocksource's
    'max_idle_ns' value, which is currently 50% of the
    overflow point.

This extra infrastructure is conditional on
a new CONFIG_DEBUG_TIMEKEEPING option, also
added in this patch - default off.

Tested this a bit by halting qemu for specified
lengths of time to trigger the warnings.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1426133800-29329-5-git-send-email-john.stultz@linaro.org
[ Improved the changelog and the messages a bit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-13 08:06:58 +01:00