Commit graph

533,133 commits

Author SHA1 Message Date
Laurent Pinchart
3053460482 drm: rcar-du: Fix hardware plane allocation
The hardware plane allocator loops over all planes to find free
candidates. However, instead of looping over the number of hardware
planes, it loops over the number of software planes, which happens to be
larger by one unit. This has no effect in practise as the extra plane is
always cleared in the mask of free planes, but it should still be fixed
for correctness.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-03-03 16:16:09 +02:00
Laurent Pinchart
917de18037 drm: rcar-du: Implement universal plane support
Explicitly create the CRTC primary plane instead of relying on the core
helpers to do so. This simplifies the plane logic by merging the KMS and
software planes.

Reject plane API operations on the primary planes for now, as that code
will anyway be refactored when implementing support for atomic updates.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-03-03 16:16:08 +02:00
Laurent Pinchart
a64b9c7e56 drm: rcar-du: Define macros for the max number of groups, CRTCs and LVDS
Let's avoid magic constants. Beside increasing code readability, it will
also ensure that no location will be forgotten when raising the maximum
number of groups, CRTCs or LVDS encoders

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-03-03 16:16:07 +02:00
Laurent Pinchart
931b733621 drm: rcar-du: Disable fbdev emulation when no connector is present
fbdev emulation requires at least one connector, and will fail to
initialize if no connector has been successfully instantiated. Disable
it in that case and print an informational message instead of failing
probe with a confusing fbdev emulation error message.

It could be argued that probe should fail when no connector is present,
but the DU could still be useful in that case with the to-be-implemented
memory write-back support.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-03-03 16:16:06 +02:00
Laurent Pinchart
0cd90a5428 drm: rcar-du: Turn vblank on/off when enabling/disabling CRTC
The DRM core vblank handling mechanism requires drivers to forcefully
turn vblank reporting off when disabling the CRTC, and to restore the
vblank reporting status when enabling the CRTC.

Implement this using the drm_crtc_vblank_on/off helpers. When disabling
vblank we must first wait for page flips to complete, so implement page
flip completion wait as well.

Finally, drm_crtc_vblank_off() must be called at startup to synchronize
the state of the vblank core code with the hardware, which is initially
disabled. This is performed at CRTC creation time, requiring vertical
blanking to be initialized before creating CRTCs.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-03-03 16:16:05 +02:00
Laurent Pinchart
36693f3c32 drm: rcar-du: Wait for page flip completion when turning the CRTC off
Turning a CRTC off will prevent a queued page flip from ever completing,
potentially confusing userspace. Wait for queued page flips to complete
before turning the CRTC off to avoid this.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-03-03 16:16:04 +02:00
Laurent Pinchart
17f6b8a027 drm: rcar-du: Reorder CRTC functions
The next commit will need functions to be reordered to avoid forward
declarations. Do it separately to help review.

This only moves functions without any change to the code.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-03-03 16:16:03 +02:00
Laurent Pinchart
8b37c32647 drm: rcar-du: Don't set connector->encoder at init time
The drm_connector encoder field points to the encoder driving the
connector. No such association exists at init time, as all pipelines are
disabled. Don't set the field.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-03-03 16:16:02 +02:00
Laurent Pinchart
df78222d78 drm: rcar-du: Remove drm_fbdev_cma_restore_mode() call at init time
The function is meant to restore the fbdev mode in the lastclose
handler, not to be called at init time. Remove the call.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-03-03 16:16:01 +02:00
Laurent Pinchart
0e211da8d8 drm: rcar-du: Don't disable unused functions at init time
All encoders and CRTCs start disabled, re-disabling them is a no-op.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-03-03 16:16:00 +02:00
Fabian Frederick
f35593fdc8 [media] saa7146: replace current->state by set_current_state()
Use helper functions to access current->state.
Direct assignments are prone to races and therefore buggy.

current->state = TASK_RUNNING can be replaced by __set_current_state()

Thanks to Peter Zijlstra for the exact definition of the problem.

Suggested-By: Peter Zijlstra <peterz@infradead.org>

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-03 11:15:42 -03:00
Marcin Bis
c6331ba3d2 spi: fix a typo in comment.
alway -> always

Signed-off-by: Marcin Bis <marcin@bis.org.pl>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-03 14:14:26 +00:00
Rafał Miłecki
0cbfc065fe bcma: gpio: enable GPIO IRQ domain on BCM5301X
Just like on BCM47XX arch, BCM5301X also has ChipCommon with IRQ for
GPIOs. Now we have interrupts working on BCM5301X we can finally make
use of it. This has been successfully tested on 5 different devices
(Buffalo, Luxul, Netgear).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-03 15:56:07 +02:00
Larry Finger
16f7031aeb ssb: Silence warning for unknown backplane revision
When using a BCM4318 in a PCMCIA format, I get a startup message that the
device uses backplane revision 0xF000000. Next a WARNING is logged. Despite
the message, the device works fine, This patch silences the warning.

Cc: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-03 15:49:40 +02:00
Colin Ian King
2a19f7765b wil6210: increase cmd buffer size to avoid sscanf buffer overflow
cppcheck detected a buffer overflow:

[drivers/net/wireless/ath/wil6210/debugfs.c:634]: (error) Width 8
  given in format string (no. 1) is larger than destination buffer
  'cmd[8]', use %7s to prevent overflowing it.

For the current %8s sscanf we require cmd to be 9 chars long
so increase it by 1 byte to prevent the sscan overflow (rather
than reduce the %8s specifier to %7s as cppcheck recommends).

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-03 15:48:12 +02:00
Bandan Das
587945147c cgroup: Use kvfree in pidlist_free()
The wrapper already calls the appropriate free
function, use it instead of spinning our own.

Signed-off-by: Bandan Das <bsd@redhat.com>
Acked-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-03 08:47:25 -05:00
Sujith Manoharan
6e6dd08dd3 ath9k: Fix issues in the main btcoex timer
* ath9k_mci_update_rssi() is required only for
  cards that use MCI scheme. Make sure that it
  is not called for 3-wire cards.

* Call ath9k_ps_wakeup() early since register
  accesses are made in ath9k_mci_update_rssi().

* Fix usage of btcoex_lock to handle no_stomp_timer.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-03 15:46:59 +02:00
Sujith Manoharan
c7266e99b1 ath9k: Handle timers for MCI
Make sure that the btcoex timers are started/stopped
properly for both 3-wire and MCI schemes.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-03 15:46:57 +02:00
Sujith Manoharan
30b8189891 ath9k: Fix wlan-active gpio for the AR9003 family
When disabling BTCOEX, clearing the wlanactive gpio line
is required only for pre-AR9003 cards.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-03 15:46:56 +02:00
Sujith Manoharan
e1ff147d87 ath9k: Fix MCI scheme initialization
Commit "ath9k_hw: remove ATH_BTCOEX_CFG_MCI" removed
MCI as a separate coex scheme, but we need it to
avoid fiddling with GPIO registers during
ath9k_init_btcoex() that are meant only for 3-wire
cards.

Cc: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-03 15:46:54 +02:00
Sujith Manoharan
510baea1e4 ath9k: Initialize MCI state correctly
The MCI configuration values are assigned
in ath9k_hw_btcoex_init_mci() which are used
by the MCI reset routine. When initializing
BTCOEX/MCI, ath_mci_setup() ends up using
uninitialized data. Fix this by setting up
the configuration parameters before issuing
a MCI reset.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-03 15:46:53 +02:00
Sujith Manoharan
44b9b56e50 ath9k: Remove useless return value check
ath_init_btcoex_timer() always returns 0, so
checking for error conditions is not required.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-03 15:46:51 +02:00
Taehee Yoo
3f5fe23648 rtlwifi: rtl8192cu: Add case in rtl92cu_get_hw_reg
Add HAL_DEF_WOWLAN case in rtl92cu_get_hw_reg

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-03 15:45:35 +02:00
Avinash Patil
bf97bf226a mwifiex: do not initialize ext_scan in mwifiex_init_adapter
Features which are device specific are already updated in
interface specific initialization e.g. register_dev.
We should not initialize them in mwifiex_init_adapter();
else this would overwrite earlier settings.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-03 15:43:38 +02:00
Dan Carpenter
1114ce8f36 rtlwifi: rtl8188ee: missing curly braces in handle_branch1()
From the indenting, it seems like the READ_NEXT_PAIR() was supposed to
be inside the while loop.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-03 15:40:47 +02:00
Rasmus Villemoes
df905570bb rtlwifi: rtl8821ae: Remove duplicate hex prefixes
The # flag in %X means print a 0X prefix. Remove the extra 0x prefix.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-03 15:39:34 +02:00
Olli Salonen
809abdbf46 [media] cx231xx: Hauppauge HVR-955Q ATSC/QAM tuner
Hauppauge HVR-955Q is a ATSC/QAM USB tuner with LGDT3306A demodulator and SiLabs Si2157-A30 tuner.

Only digital TV has been tested (both ATSC and QAM256).

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-03 10:36:12 -03:00
Lorenzo Bianconi
97bf861572 ath9k: add per-vif TX power capability to TX path
In order to add per-vif TX power capability cap per-packet TX power to vif
configured power if the latter is lower than per-rate TX power and mac80211
per-frame power. Use vif TX power if TPC has been disabled for current the
interface

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-03 15:36:02 +02:00
Lorenzo Bianconi
283dd11994 ath9k: add per-vif TX power capability
Configure the HW with highest TX power among all vif when HW TPC has been
enabled in order to add support to per-vif TX power capability. Use lowest
configured power among all interfaces when TPC is disabled

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-03 15:36:01 +02:00
Olli Salonen
c28aebe178 [media] si2157: IF frequency for ATSC and QAM
For supporting ATSC and QAM modes the driver should use a smaller IF frequency than 5 MHz.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-03 10:35:08 -03:00
Mauro Carvalho Chehab
95f22c5aae [media] lgdt3306a: Minor source code cleanups
Fix a few minor CodingStyle issues at the source code:
	- Use proper multi-line comments;
	- Align the log tables;
	- Remove the .type from dvb_frontend_ops, since this is not
	  needed anymore (since the drivers conversion to DVBv5);
	- Remove emacs format macro.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-03 10:34:15 -03:00
Mauro Carvalho Chehab
534f4364f9 [media] lgdt3306a: Break long lines
Fix most of checkpatch warnings like:
	WARNING: line over 80 characters

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-03 10:34:15 -03:00
Mauro Carvalho Chehab
9369fe012d [media] lgdt3306a: constify log tables
Ideally, we should be replacing this function by intlog10().

While we don't do that, let's at least constify the tables,
in order to remove its code footfrint, and get rid of nelems.

This also fixes a few 80-cols CodingStyle warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-03 10:34:14 -03:00
Mauro Carvalho Chehab
c9897649db [media] lbdt3306a: remove uneeded braces
WARNING: braces {} are not necessary for any arm of this statement
+		if (ret == 0) {
[...]
+		} else {
[...]

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-03 10:34:14 -03:00
Mauro Carvalho Chehab
b4e43e959b [media] lgdt3306a: Don't use else were not needed
Get rid of the remaining checkpatch.pl warnings:
	WARNING: braces {} are not necessary for any arm of this statement

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-03 10:34:14 -03:00
Mauro Carvalho Chehab
b1a88c713a [media] lbdt3306a: simplify the lock status check
The logic there is too complex and it looks like an inifite
loop.

So, simplify the logic and implement it as a for loop.

This gets rid of the following checkpatch.pl warnings:

WARNING: else is not generally useful after a break or return
+			return LG3306_UNLOCK;
+		} else {

WARNING: else is not generally useful after a break or return
+			return LG3306_UNLOCK;
+		} else {

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-03 10:34:13 -03:00
Mauro Carvalho Chehab
097117cab5 [media] lbdt3306a: rework at printk macros
Use pr_foo() where there's a direct replacement. For debug, use
custom-made macros, for now, as there are 3 different debug levels.

We should get rid of those some day, specially since several such
macros can be just removed, as Kernel trace would provide about
the same output.

This gets rid of some checkpatch errors:

WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...
+#define lg_info(fmt, arg...)	printk(KERN_INFO "lgdt3306a: " fmt, ##arg)

ERROR: Macros with complex values should be enclosed in parentheses
+#define lg_dbg(fmt, arg...) if (debug & DBG_INFO)			\
+				lg_printk(KERN_DEBUG,         fmt, ##arg)

ERROR: Macros with complex values should be enclosed in parentheses
+#define lg_reg(fmt, arg...) if (debug & DBG_REG)			\
+				lg_printk(KERN_DEBUG,         fmt, ##arg)

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-03 10:34:13 -03:00
Mauro Carvalho Chehab
e2c47fa7dd [media] lgdt3306a: Remove FSF address
Fix this CodingStyle error:

	ERROR: Do not include the paragraph about writing to the Free Software Foundation's mailing address from the sample GPL notice. The FSF has changed addresses in the past, and may do so ag$
	#56: FILE: drivers/media/dvb-frontends/lgdt3306a.c:19:
	+ *    along with this program; if not, write to the Free Software$

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-03 10:34:13 -03:00
Mauro Carvalho Chehab
ee0133eea0 [media] lgdt3306a: properly handle I/O errors
Fixes the following smatch errors:

drivers/media/dvb-frontends/lgdt3306a.c: In function 'lgdt3306a_set_if':
drivers/media/dvb-frontends/lgdt3306a.c:695:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
  int ret;
      ^
drivers/media/dvb-frontends/lgdt3306a.c: In function 'lgdt3306a_monitor_vsb':
drivers/media/dvb-frontends/lgdt3306a.c:1033:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
  int ret;
      ^
drivers/media/dvb-frontends/lgdt3306a.c: In function 'lgdt3306a_check_oper_mode':
drivers/media/dvb-frontends/lgdt3306a.c:1082:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
  int ret;
      ^
drivers/media/dvb-frontends/lgdt3306a.c: In function 'lgdt3306a_check_lock_status':
drivers/media/dvb-frontends/lgdt3306a.c:1109:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
  int ret;
      ^
drivers/media/dvb-frontends/lgdt3306a.c: In function 'lgdt3306a_check_neverlock_status':
drivers/media/dvb-frontends/lgdt3306a.c:1185:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
  int ret;
      ^
drivers/media/dvb-frontends/lgdt3306a.c: In function 'lgdt3306a_pre_monitoring':
drivers/media/dvb-frontends/lgdt3306a.c:1199:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
  int ret;
      ^
drivers/media/dvb-frontends/lgdt3306a.c: In function 'lgdt3306a_get_packet_error':
drivers/media/dvb-frontends/lgdt3306a.c:1310:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
  int ret;
      ^

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-03 10:34:12 -03:00
Mauro Carvalho Chehab
a132fef816 [media] lgdt3306a: don't go past the buffer
As warned by smatch:
	drivers/media/dvb-frontends/lgdt3306a.c:1354 log10_x1000() error: buffer overflow 'valx_x10' 14 <= 14
	drivers/media/dvb-frontends/lgdt3306a.c:1355 log10_x1000() error: buffer overflow 'log10x_x1000' 14 <= 14

There's a potential of returning a value out of the buffer. Fix it.

While here, remove the ugly braced block.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-03 10:34:12 -03:00
Mauro Carvalho Chehab
15c546e1c8 [media] lgdt3306a: one bit fields should be unsigned
Fix two smatch warnings:
	drivers/media/dvb-frontends/lgdt3306a.h:53:28: error: dubious one-bit signed bitfield
	drivers/media/dvb-frontends/lgdt3306a.h:56:33: error: dubious one-bit signed bitfield

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-03 10:34:12 -03:00
Mauro Carvalho Chehab
c43e651205 [media] lgdt3306a: Use IS_ENABLED() for attach function
Simplify the check if CONFIG_DVB_LGDT3306A is enabled, use the
IS_ENABLED() macro, just like the other frontend modules.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-03 10:34:12 -03:00
Mauro Carvalho Chehab
4937ba94a0 [media] lgdt3306a: Use hexadecimal values in lowercase
While this is not a mandatory rule at the CodingStyle, we prefer
hexadecimal values in lowercase. Currently, there's a mix of lowercase
and uppercase ons at lgdt3306a. So, convert all to lowercase with this
small script:

	perl -ne 'if (m,0x([\dA-F]+),) { $o=$1; $n=lc $1; s,0x($o),0x$n, } print $_'

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-03 10:34:11 -03:00
Michael Ira Krufky
34a5a2f811 [media] lgdt3306a: more small whitespace cleanups
Just CodingStyle. No functional changes.

Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-03 10:34:11 -03:00
Michael Ira Krufky
831a91120a [media] lgdt3306a: typo fix
fix WARNING: 'supress' may be misspelled - perhaps 'suppress'?

Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-03 10:34:11 -03:00
Michael Ira Krufky
cb4671c87f [media] lgdt3306a: fix WARNING: please, no spaces at the start of a line
Properly indent register initialization tables.

Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-03 10:34:10 -03:00
Michael Ira Krufky
6da7ac9857 [media] lgdt3306a: fix ERROR: do not use C99 // comments
Replace C99 comments by /* */ blocks.

Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-03 10:34:10 -03:00
Michael Ira Krufky
f883d603d4 [media] lgdt3306a: do not add new typedefs
We should not be using typedefs at the Kernel, as this makes harder
for reviewers to understand the code.

Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-03 10:34:10 -03:00
Michael Ira Krufky
ae21e44777 [media] lgdt3306a: fix ERROR: do not use assignment in if condition
Just CodingStyle fix.

Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-03 10:34:09 -03:00
Michael Ira Krufky
ebd9175ea4 [media] lgdt3306a: move EXPORT_SYMBOL to be just after function
Fixes CodingStyle error:
	WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable.

Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-03 10:34:09 -03:00