ieee80211_sta_free_link() only frees the link and doesn't
unhash it, so it can't be used here. Instead this needs
to use ieee80211_sta_remove_link(), which unhashes it. An
argument against it was that it also calls the driver and
that already happened, but calls to the driver removing a
link that's already removed are suppressed, so that's not
actually an issue. Use it to fix the hashtable.
Reported-and-tested-by: Jouni Malinen <j@w1.fi>
Fixes: 84674b03d8 ("wifi: mac80211: Remove deleted sta links in ieee80211_ml_reconf_work()")
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260318180622.9240067117e9.I45fb2b7f04d75e48d2f3e9c6650ef9f54a314f5b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_tx_prepare_skb() has three error paths, but only two of them
free the skb. The first error path (ieee80211_tx_prepare() returning
TX_DROP) does not free it, while invoke_tx_handlers() failure and the
fragmentation check both do.
Add kfree_skb() to the first error path so all three are consistent,
and remove the now-redundant frees in callers (ath9k, mt76,
mac80211_hwsim) to avoid double-free.
Document the skb ownership guarantee in the function's kdoc.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20260314065455.2462900-1-nbd@nbd.name
Fixes: 06be6b149f ("mac80211: add ieee80211_tx_prepare_skb() helper function")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mesh_matches_local() unconditionally dereferences ie->mesh_config to
compare mesh configuration parameters. When called from
mesh_rx_csa_frame(), the parsed action-frame elements may not contain a
Mesh Configuration IE, leaving ie->mesh_config NULL and triggering a
kernel NULL pointer dereference.
The other two callers are already safe:
- ieee80211_mesh_rx_bcn_presp() checks !elems->mesh_config before
calling mesh_matches_local()
- mesh_plink_get_event() is only reached through
mesh_process_plink_frame(), which checks !elems->mesh_config, too
mesh_rx_csa_frame() is the only caller that passes raw parsed elements
to mesh_matches_local() without guarding mesh_config. An adjacent
attacker can exploit this by sending a crafted CSA action frame that
includes a valid Mesh ID IE but omits the Mesh Configuration IE,
crashing the kernel.
The captured crash log:
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: events_unbound cfg80211_wiphy_work
[...]
Call Trace:
<TASK>
? __pfx_mesh_matches_local (net/mac80211/mesh.c:65)
ieee80211_mesh_rx_queued_mgmt (net/mac80211/mesh.c:1686)
[...]
ieee80211_iface_work (net/mac80211/iface.c:1754 net/mac80211/iface.c:1802)
[...]
cfg80211_wiphy_work (net/wireless/core.c:426)
process_one_work (net/kernel/workqueue.c:3280)
? assign_work (net/kernel/workqueue.c:1219)
worker_thread (net/kernel/workqueue.c:3352)
? __pfx_worker_thread (net/kernel/workqueue.c:3385)
kthread (net/kernel/kthread.c:436)
[...]
ret_from_fork_asm (net/arch/x86/entry/entry_64.S:255)
</TASK>
This patch adds a NULL check for ie->mesh_config at the top of
mesh_matches_local() to return false early when the Mesh Configuration
IE is absent.
Fixes: 2e3c873682 ("mac80211: support functions for mesh")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260318034244.2595020-1-xmei5@asu.edu
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211_chandef_create() is called universally to create the
default chandef during hw registration, however it only really
makes sense to be used for 2GHz, 5GHz, and 6GHz (and by extension
the 'LC' band) as it relies on the channel type which is only
relevant to those specific bands.
To reduce some confusion, create a generic helper for creating the
default chandef that makes sense for all supported bands.
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260312045804.362974-2-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For NPCA, we need to treat the channel request differently
for AP and other interfaces (APs can share NPCA, under the
assumption that userspace will set them up with the same
BSS color.) This is difficult if we have to check against
a chanreq made up from the chanctx, but this isn't a code
path that needs to be highly optimised, so just always use
the (originally) recheck functionality to check against
all users of the chanctx.
Link: https://patch.msgid.link/20260303152641.1a3ff6ead82b.I486f1a94b9a32e0b045815cbbb22679c8cef56e4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We don't need to duplicate the macros, just make a generic
one that gets the name prefix to be used, and use that to
create the others. While at it, add the puncturing bitmap
to the trace and simplify the ternary expressions.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260303152641.ca32d70055f8.I8138a31ceb75715d928d807554288baccc33cd8c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When in strict mode, validate that the HE 6 GHz operation is
valid even when EHT operation is used instead. This checks
that APs are advertising correct information for HE clients,
without testing with such clients.
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260303150832.74b934163b99.If4d1db3f39c37900cf0d0f4669cd5f8b677daaa0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_chan_bw_change() iterates all stations and accesses
link->reserved.oper via sta->sdata->link[link_id]. For stations on
AP_VLAN interfaces (e.g. 4addr WDS clients), sta->sdata points to
the VLAN sdata, whose link never participates in chanctx reservations.
This leaves link->reserved.oper zero-initialized with chan == NULL,
causing a NULL pointer dereference in __ieee80211_sta_cap_rx_bw()
when accessing chandef->chan->band during CSA.
Resolve the VLAN sdata to its parent AP sdata using get_bss_sdata()
before accessing link data.
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20260305170812.2904208-1-nbd@nbd.name
[also change sta->sdata in ARRAY_SIZE even if it doesn't matter]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Inactive times of around 0xffffffff milliseconds have been observed on
an ath9k device on ARM. This is likely due to a memory ordering race in
the jiffies_to_msecs(jiffies - last_active()) calculation causing an
overflow when the observed jiffies is below ieee80211_sta_last_active().
Use jiffies_delta_to_msecs() instead to avoid this problem.
Fixes: 7bbdd2d987 ("mac80211: implement station stats retrieval")
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Link: https://patch.msgid.link/20260303161701.31808-1-nicolas.cavallari@green-communications.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We shouldn't remove keys before disable beaconing, at least when
beacon protection is used, since that would remove keys that are
still used for beacon transmission at the same time. Stop before
removing keys so there's no race.
Fixes: af2d14b01c ("mac80211: Beacon protection using the new BIGTK (STA)")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260303150339.574e7887b3ab.I50d708f5aa22584506a91d0da7f8a73ba39fceac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The action code actually serves to identify the type of action
frame, so it really isn't part of the per-type structure. Pull
it out and have it in the general action frame format.
In theory, whether or not the action code is present in this
way is up to each category, but all categories that are defined
right now all have that value.
While at it, and since this change requires changing all users,
remove the 'u' and make it an anonymous union in this case, so
that all code using this changes.
Change IEEE80211_MIN_ACTION_SIZE to take an argument which says
how much of the frame is needed, e.g. category, action_code or
the specific frame type that's defined in the union. Again this
also ensures that all code is updated.
In some cases, fix bugs where the SKB length was checked after
having accessed beyond the checked length, in particular in FTM
code, e.g. ieee80211_is_ftm().
Link: https://patch.msgid.link/20260226183607.67e71846b59e.I9a24328e3ffcaae179466a935f1c3345029f9961@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cross-merge networking fixes after downstream PR (net-7.0-rc3).
No conflicts.
Adjacent changes:
net/netfilter/nft_set_rbtree.c
fb7fb40163 ("netfilter: nf_tables: clone set on flush only")
3aea466a43 ("netfilter: nft_set_rbtree: don't disable bh when acquiring tree lock")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The missing initialization causes driver to misinterpret the EML control bitmap,
resulting in incorrect link bitmap handling.
Fixes: 0d95280a2d ("wifi: mac80211: Add eMLSR/eMLMR action frame parsing support")
Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260303054725.471548-1-MeiChia.Chiu@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently key installation is only supported for netdev. For NAN,
support most key operations (except setting default data key) on
wdevs instead of netdevs, and adjust all the APIs and tracing to
match.
Since nothing currently sets NL80211_EXT_FEATURE_SECURE_NAN, this
doesn't change anything (P2P Device already isn't allowed.)
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260107150057.69a0cfad95fa.I00efdf3b2c11efab82ef6ece9f393382bcf33ba8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211_nan_conf::cluster_id is currently a pointer, but there is no real
reason to not have it an array. It makes things easier as there is no
need to check the pointer validity each time.
If a cluster ID wasn't provided by user space it will be randomized.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260302091108.2b12e4ccf5bb.Ib16bf5cca55463d4c89e18099cf1dfe4de95d405@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The function ieee80211_start_scan() was refactored and replaced by
__ieee80211_start_scan() in commit f3b85252f0 ("mac80211: fix scan
races and rework scanning"). Update the comment in
ieee80211_tx_h_check_assoc() accordingly.
Additionally, remove the broken gmane.org link in the comment.
Suggested-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Assisted-by: unnamed:deepseek-v3.2 coccinelle
Signed-off-by: Kexin Sun <kexinsun@smail.nju.edu.cn>
Link: https://patch.msgid.link/20260228061944.887-1-kexinsun@smail.nju.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Advertise support for IEEE 802.1X authentication protocol directly from
mac80211, without depending on driver indication of (Re)Association
frame encryption capability.
As specified in "IEEE P802.11bi/D4.0, clauses 12.16.5 and 12.16.8.2",
IEEE 802.1X authentication can operate with or without (Re)Association
frame encryption support. Therefore, mac80211 can safely advertise
802.1X support independently of driver capabilities.
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Link: https://patch.msgid.link/20260226185553.1516290-6-kavita.kavita@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for the IEEE 802.1X authentication protocol in non-AP STA
mode, as specified in "IEEE P802.11bi/D4.0, 12.16.5".
IEEE 802.1X authentication involves multiple Authentication frame
exchanges, with the non-AP STA and AP alternating transaction
sequence numbers. The number of Authentication frame exchanges
depends on the EAP method in use. For IEEE 802.1X authentication,
process only Authentication frames with the expected transaction
sequence number.
For IEEE 802.1X Authentication, Table 9-71 specifies that the
Encapsulation Length field as specified in Clause 9.4.1.82 shall be
present in all IEEE 802.1X Authentication frames. Drop the frame in
the mac80211 if the Encapsulation Length field is missing.
After receiving the final Authentication frame with status code
WLAN_STATUS_8021X_AUTH_SUCCESS from the AP, mac80211 marks the state
as authenticated, as it indicates the EAP handshake has completed
successfully over the Authentication frames as specified in
Clause 12.16.5.
In the PMKSA caching case, only two Authentication frames are
exchanged if the AP identifies a valid PMKSA, then as specified
in Clause 12.16.8.3, the AP shall set the Status Code to
WLAN_STATUS_SUCCESS in the final Authentication frame and must not
include an encapsulated EAPOL PDU. This frame will be the final
Authentication frame from the AP when PMKSA caching is enabled,
and mac80211 marks the state as authenticated.
In case of authentication success or failure, forward the
Authentication frame to userspace(e.g. wpa_supplicant), and let
userspace validate the Authentication frame from the AP as per the
specification.
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Link: https://patch.msgid.link/20260226185553.1516290-5-kavita.kavita@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Per IEEE Std 802.11be-2024, 12.5.2.3.3, if the MPDU is an
individually addressed Data frame between an AP MLD and a
non-AP MLD associated with the AP MLD, then A1/A2/A3
will be MLD MAC addresses. Otherwise, Al/A2/A3 will be
over-the-air link MAC addresses.
Currently, during AAD and Nonce computation for software based
encryption/decryption cases, mac80211 directly uses the addresses it
receives in the skb frame header. However, after the first
authentication, management frame addresses for non-AP MLD stations
are translated to MLD addresses from over the air link addresses in
software. This means that the skb header could contain translated MLD
addresses, which when used as is, can lead to incorrect AAD/Nonce
computation.
In the following manner, ensure that the right set of addresses are used:
In the receive path, stash the pre-translated link addresses in
ieee80211_rx_data and use them for the AAD/Nonce computations
when required.
In the transmit path, offload the encryption for a CCMP/GCMP key
to the hwsim driver that can then ensure that encryption and hence
the AAD/Nonce computations are performed on the frame containing the
right set of addresses, i.e, MLD addresses if unicast data frame and
link addresses otherwise.
To do so, register the set key handler in hwsim driver so mac80211 is
aware that it is the driver that would take care of encrypting the
frame. Offload encryption for a CCMP/GCMP key, while keeping the
encryption for WEP/TKIP and MMIE generation for a AES_CMAC or a
AES_GMAC key still at the SW crypto in mac layer
Co-developed-by: Rohan Dutta <quic_drohan@quicinc.com>
Signed-off-by: Rohan Dutta <quic_drohan@quicinc.com>
Signed-off-by: Sai Pratyusha Magam <sai.magam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260226042959.3766157-1-sai.magam@oss.qualcomm.com
[only store and apply link_addrs for unicast non-data
rather storing always and applying for !unicast_data]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the unsolicited probe response template is always fetched from
the default link of a virtual interface in both Multi-Link Operation (MLO)
and non-MLO cases. However, in the MLO case there is a need to fetch the
unsolicited probe response template from a specific link instead of the
default link.
Hence, add support for fetching the unsolicited probe response template
based on the link ID from the corresponding link data.
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Co-developed-by: Raj Kumar Bhagat <raj.bhagat@oss.qualcomm.com>
Signed-off-by: Raj Kumar Bhagat <raj.bhagat@oss.qualcomm.com>
Link: https://patch.msgid.link/20260220-fils-prob-by-link-v1-2-a2746a853f75@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the FILS discovery template is always fetched from the default
link of a virtual interface in both Multi-Link Operation (MLO) and
non-MLO cases. However, in the MLO case there is a need to fetch the FILS
discovery template from a specific link instead of the default link.
Hence, add support for fetching the FILS discovery template based on the
link ID from the corresponding link data.
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Co-developed-by: Raj Kumar Bhagat <raj.bhagat@oss.qualcomm.com>
Signed-off-by: Raj Kumar Bhagat <raj.bhagat@oss.qualcomm.com>
Link: https://patch.msgid.link/20260220-fils-prob-by-link-v1-1-a2746a853f75@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, a station can only be added to a netdev interface,
mainly because there was no need for a station of a non-netdev
interface.
But for NAN, we will have stations that belong to the NL80211_IFTYPE_NAN
interface.
Prepare for adding/changing/deleting a station that belongs to a non-netdev
interface. This doesn't actually allow such stations - this will be done
in a different patch.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.65c9cc96f814.Ic02066b88bb8ad6b21e15cbea8d720280008c83b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, for AP MLD, the link ID is not provided when a NULL
packet is triggered to probe a station. For non-MLO stations connected
to an AP MLD, use the station's default link to send the NULL packets
and set addr2 and addr3 to the link address. For MLO stations, set the
link ID to unspecified to let the driver select the appropriate link.
Co-developed-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Co-developed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Signed-off-by: Suraj P Kizhakkethil <suraj.kizhakkethil@oss.qualcomm.com>
Link: https://patch.msgid.link/20260213100126.1414398-3-suraj.kizhakkethil@oss.qualcomm.com
[init link_id in each branch instead of default to zero]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, when sending a NULL frame to probe a station, the band
information is derived from the chanctx_conf in the mac80211 vif's
bss_conf. However, for AP MLD, chanctx_conf is not assigned to the
vif's bss_conf; instead it is assigned on a per-link basis. As a result,
for AP MLD, sending a NULL packet to probe will trigger a warning.
WARNING: net/mac80211/cfg.c:4635 at ieee80211_probe_client+0x1a8/0x1d8 [mac80211], CPU#2: hostapd/244
Call trace:
ieee80211_probe_client+0x1a8/0x1d8 [mac80211] (P)
nl80211_probe_client+0xac/0x170 [cfg80211]
genl_family_rcv_msg_doit+0xc8/0x134
genl_rcv_msg+0x200/0x280
netlink_rcv_skb+0x38/0xf0
genl_rcv+0x34/0x48
netlink_unicast+0x314/0x3a0
netlink_sendmsg+0x150/0x390
____sys_sendmsg+0x1f4/0x21c
___sys_sendmsg+0x98/0xc0
__sys_sendmsg+0x74/0xcc
__arm64_sys_sendmsg+0x20/0x34
invoke_syscall.constprop.0+0x4c/0xd0
do_el0_svc+0x3c/0xd0
el0_svc+0x28/0xc0
el0t_64_sync_handler+0x98/0xdc
el0t_64_sync+0x154/0x158
---[ end trace 0000000000000000 ]---
For NULL packets sent to probe stations, set the band information only
for non-MLD, since MLD transmissions does not rely on band.
Signed-off-by: Suraj P Kizhakkethil <suraj.kizhakkethil@oss.qualcomm.com>
Link: https://patch.msgid.link/20260213100126.1414398-2-suraj.kizhakkethil@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In mesh_rx_csa_frame(), elems->mesh_chansw_params_ie is dereferenced
at lines 1638 and 1642 without a prior NULL check:
ifmsh->chsw_ttl = elems->mesh_chansw_params_ie->mesh_ttl;
...
pre_value = le16_to_cpu(elems->mesh_chansw_params_ie->mesh_pre_value);
The mesh_matches_local() check above only validates the Mesh ID,
Mesh Configuration, and Supported Rates IEs. It does not verify the
presence of the Mesh Channel Switch Parameters IE (element ID 118).
When a received CSA action frame omits that IE, ieee802_11_parse_elems()
leaves elems->mesh_chansw_params_ie as NULL, and the unconditional
dereference causes a kernel NULL pointer dereference.
A remote mesh peer with an established peer link (PLINK_ESTAB) can
trigger this by sending a crafted SPECTRUM_MGMT/CHL_SWITCH action frame
that includes a matching Mesh ID and Mesh Configuration IE but omits the
Mesh Channel Switch Parameters IE. No authentication beyond the default
open mesh peering is required.
Crash confirmed on kernel 6.17.0-5-generic via mac80211_hwsim:
BUG: kernel NULL pointer dereference, address: 0000000000000000
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:ieee80211_mesh_rx_queued_mgmt+0x143/0x2a0 [mac80211]
CR2: 0000000000000000
Fix by adding a NULL check for mesh_chansw_params_ie after
mesh_matches_local() returns, consistent with how other optional IEs
are guarded throughout the mesh code.
The bug has been present since v3.13 (released 2014-01-19).
Fixes: 8f2535b92d ("mac80211: process the CSA frame for mesh accordingly")
Cc: stable@vger.kernel.org
Signed-off-by: Vahagn Vardanian <vahagn@redrays.io>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
link_id is taken from the ML Reconfiguration element (control & 0x000f),
so it can be 0..15. link_removal_timeout[] has IEEE80211_MLD_MAX_NUM_LINKS
(15) elements, so index 15 is out-of-bounds. Skip subelements with
link_id >= IEEE80211_MLD_MAX_NUM_LINKS to avoid a stack out-of-bounds
write.
Fixes: 8eb8dd2ffb ("wifi: mac80211: Support link removal using Reconfiguration ML element")
Reported-by: Ariel Silver <arielsilver77@gmail.com>
Signed-off-by: Ariel Silver <arielsilver77@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260220101129.1202657-1-Ariel.Silver@cybereason.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, mac80211 only initializes default WMM parameters
on the deflink during do_open(). For MLO cases, this
leaves the additional links without proper WMM defaults
if hostapd does not supply per-link WMM parameters, leading
to inconsistent QoS behavior across links.
Set default WMM parameters for each link during
ieee80211_vif_update_links(), because this ensures all
individual links in an MLD have valid WMM settings during
bring-up and behave consistently across different BSS.
Signed-off-by: Ramanathan Choodamani <quic_rchoodam@quicinc.com>
Signed-off-by: Aishwarya R <aishwarya.r@oss.qualcomm.com>
Link: https://patch.msgid.link/20260205094216.3093542-1-aishwarya.r@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Total patches: 107
Reviews/patch: 1.07
Reviewed rate: 67%
- The 2 patch series "ocfs2: give ocfs2 the ability to reclaim
suballocator free bg" from Heming Zhao saves disk space by teaching
ocfs2 to reclaim suballocator block group space.
- The 4 patch series "Add ARRAY_END(), and use it to fix off-by-one
bugs" from Alejandro Colomar adds the ARRAY_END() macro and uses it in
various places.
- The 2 patch series "vmcoreinfo: support VMCOREINFO_BYTES larger than
PAGE_SIZE" from Pnina Feder makes the vmcore code future-safe, if
VMCOREINFO_BYTES ever exceeds the page size.
- The 7 patch series "kallsyms: Prevent invalid access when showing
module buildid" from Petr Mladek cleans up kallsyms code related to
module buildid and fixes an invalid access crash when printing
backtraces.
- The 3 patch series "Address page fault in
ima_restore_measurement_list()" from Harshit Mogalapalli fixes a
kexec-related crash that can occur when booting the second-stage kernel
on x86.
- The 6 patch series "kho: ABI headers and Documentation updates" from
Mike Rapoport updates the kexec handover ABI documentation.
- The 4 patch series "Align atomic storage" from Finn Thain adds the
__aligned attribute to atomic_t and atomic64_t definitions to get
natural alignment of both types on csky, m68k, microblaze, nios2,
openrisc and sh.
- The 2 patch series "kho: clean up page initialization logic" from
Pratyush Yadav simplifies the page initialization logic in
kho_restore_page().
- The 6 patch series "Unload linux/kernel.h" from Yury Norov moves
several things out of kernel.h and into more appropriate places.
- The 7 patch series "don't abuse task_struct.group_leader" from Oleg
Nesterov removes the usage of ->group_leader when it is "obviously
unnecessary".
- The 5 patch series "list private v2 & luo flb" from Pasha Tatashin
adds some infrastructure improvements to the live update orchestrator.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaY4giAAKCRDdBJ7gKXxA
jgusAQDnKkP8UWTqXPC1jI+OrDJGU5ciAx8lzLeBVqMKzoYk9AD/TlhT2Nlx+Ef6
0HCUHUD0FMvAw/7/Dfc6ZKxwBEIxyww=
=mmsH
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
Introduce support in AP mode for parsing of the Operating Mode Notification
frame sent by the client to enable/disable MLO eMLSR or eMLMR if supported
by both the AP and the client.
Add drv_set_eml_op_mode mac80211 callback in order to configure underlay
driver with eMLSR/eMLMR info.
Tested-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260129-mac80211-emlsr-v4-1-14bdadf57380@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Prior initiating communication in a DFS channel, there should be a
monitoring of RADAR in that channel for a minimum of 600 seconds if it
is a Weather RADAR channel and 60 seconds for other DFS channels. This
Channel Availability Check(CAC) is currently implemented by scheduling
a work item for execution with a delay equal to an appropriate timeout.
But this work item is observed to take more delay than specified
(4-5 seconds in regular DFS channels and 25-30 seconds in Weather RADAR
channels). Even though this delay is expected in case of delayed work
queue as there is no guarantee that the work will be scheduled exactly
after the specified delay, a delay of more than 20 seconds is too much
for the AP to be in non-operational state.
Recently commit 7ceba45a66 ("wifi: cfg80211: add an hrtimer based
delayed work item") added an infrastructure to overcome this issue by
supporting high resolution timers for mac80211 delayed work, which do not
have this timeout latency. Switch the CAC timeout to use this
infrastructure, so the CAC completion handling is triggered with tighter
timing and reduced latency.
Signed-off-by: Amith A <amith.a@oss.qualcomm.com>
Link: https://patch.msgid.link/20260130035511.2328713-1-amith.a@oss.qualcomm.com
[fix delay handling]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- cfg80211/mac80211
- most of EPPKE/802.1X over auth frames support
- additional FTM capabilities
- split up drop reasons better, removing generic RX_DROP
- NAN cleanups/fixes
- ath11k:
- support for Channel Frequency Response measurement
- ath12k:
- support for the QCC2072 chipset
- iwlwifi:
- partial NAN support
- UNII-9 support
- some UHR/802.11bn FW APIs
- remove most of MLO/EHT from iwlmvm
(such devices use iwlmld)
- rtw89:
- preparations for RTL8922DE support
-----BEGIN PGP SIGNATURE-----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=70Rs
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-01-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Another fairly large set of changes, notably:
- cfg80211/mac80211
- most of EPPKE/802.1X over auth frames support
- additional FTM capabilities
- split up drop reasons better, removing generic RX_DROP
- NAN cleanups/fixes
- ath11k:
- support for Channel Frequency Response measurement
- ath12k:
- support for the QCC2072 chipset
- iwlwifi:
- partial NAN support
- UNII-9 support
- some UHR/802.11bn FW APIs
- remove most of MLO/EHT from iwlmvm
(such devices use iwlmld)
- rtw89:
- preparations for RTL8922DE support
* tag 'wireless-next-2026-01-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (184 commits)
wifi: iwlegacy: add missing mutex protection in il4965_store_tx_power()
wifi: iwlegacy: add missing mutex protection in il3945_store_measurement()
wifi: mac80211: use u64_stats_t with u64_stats_sync properly
wifi: p54: Fix memory leak in p54_beacon_update()
wifi: cfg80211: treat deprecated INDOOR_SP_AP_OLD control value as LPI mode
wifi: rtw88: sdio: Migrate to use sdio specific shutdown function
wifi: rsi: sdio: Migrate to use sdio specific shutdown function
sdio: Provide a bustype shutdown function
wifi: nl80211/cfg80211: support operating as RSTA in PMSR FTM request
wifi: nl80211/cfg80211: add negotiated burst period to FTM result
wifi: nl80211/cfg80211: clarify periodic FTM parameters for non-EDCA based ranging
wifi: nl80211/cfg80211: add new FTM capabilities
wifi: iwlwifi: rename struct iwl_mcc_allowed_ap_type_cmd::offset_map
wifi: iwlwifi: mvm: Remove link_id from time_events
wifi: iwlwifi: mld: change cluster_id type to u8 array
wifi: iwlwifi: support V13 of iwl_lari_config_change_cmd
wifi: iwlwifi: split bios_value_u32 to separate the header
wifi: iwlwifi: uefi: cache the DSM functions
wifi: iwlwifi: acpi: cache the DSM functions
wifi: iwlwifi: mvm: Cleanup MLO code
...
====================
Link: https://patch.msgid.link/20260129110136.176980-39-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TID-To-Link Mapping (TTLM) elements do not contain any link mapping
presence indicator if a default mapping is used and parsing needs to be
skipped.
Note that access points should not explicitly report an advertised TTLM
with a default mapping as that is the implied mapping if the element is
not included, this is even the case when switching back to the default
mapping. However, mac80211 would incorrectly parse the frame and would
also read one byte beyond the end of the element.
Reported-by: Ruikai Peng <ruikai@pwno.io>
Closes: https://lore.kernel.org/linux-wireless/CAFD3drMqc9YWvTCSHLyP89AOpBZsHdZ+pak6zVftYoZcUyF7gw@mail.gmail.com
Fixes: 702e80470a ("wifi: mac80211: support handling of advertised TID-to-link mapping")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20260129113349.d6b96f12c732.I69212a50f0f70db185edd3abefb6f04d3cb3e5ff@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
On 64bit arches, struct u64_stats_sync is empty and provides no help
against load/store tearing. Convert to u64_stats_t to ensure atomic
operations.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260123203845.2915525-1-mmyangfl@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>