[ Upstream commit bbc7bd658d ]
The ringbuf max_entries must be PAGE_ALIGNED. See kernel function
ringbuf_map_alloc(). So for arm64 64KB page size, adjust max_entries
properly.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250607013626.1553001-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e8ebfe677 ]
Since f916dd32a9 ("arm64/fpsimd: ptrace: Mandate SVE payload for
streaming-mode state") we reject attempts to write to the streaming mode
regset even if there is no register data supplied, causing the tests for
setting vector lengths and setting SVE_VL_INHERIT in sve-ptrace to
spuriously fail. Set the flag to avoid the issue, we still support not
supplying register data.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250609-kselftest-arm64-ssve-fixups-v2-3-998fcfa6f240@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61f7e318e9 ]
If a default variable contains itself, do not recurse on it.
For example:
ADD_CONFIG := ${CONFIG_DIR}/temp_config
DEFAULTS
ADD_CONFIG = ${CONFIG_DIR}/default_config ${ADD_CONFIG}
The above works because the temp variable ADD_CONFIG (is a temp because it
is created with ":=") is already defined, it will be substituted in the
variable option. But if it gets commented out:
# ADD_CONFIG := ${CONFIG_DIR}/temp_config
DEFAULTS
ADD_CONFIG = ${CONFIG_DIR}/default_config ${ADD_CONFIG}
Then the above will go into a recursive loop where ${ADD_CONFIG} will
get replaced with the current definition of ADD_CONFIG which contains the
${ADD_CONFIG} and that will also try to get converted. ktest.pl will error
after 100 attempts of recursion and fail.
When replacing a variable with the default variable, if the default
variable contains itself, do not replace it.
Cc: "John Warthog9 Hawley" <warthog9@kernel.org>
Cc: Dhaval Giani <dhaval.giani@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/20250718202053.732189428@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cda7ac8ce7 ]
In the function mperf_start(), mperf_monitor snapshots the time, tsc
and finally the aperf,mperf MSRs. However, this order of snapshotting
in is reversed in mperf_stop(). As a result, the C0 residency (which
is computed as delta_mperf * 100 / delta_tsc) is under-reported on
CPUs that is 100% busy.
Fix this by snapshotting time, tsc and then aperf,mperf in
mperf_stop() in the same order as in mperf_start().
Link: https://lore.kernel.org/r/20250612122355.19629-2-gautham.shenoy@amd.com
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a089bb2822 ]
Since commit c5b6ababd2 ("locking/mutex: implement
mutex_trylock_nested") makes mutex_trylock() as an inlined
function if CONFIG_DEBUG_LOCK_ALLOC=y, we can not use
mutex_trylock() for testing the glob filter of ftrace.
Use mutex_unlock instead.
Link: https://lore.kernel.org/r/175151680309.2149615.9795104805153538717.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a40f0cdce7 ]
The heuristic to derive a clang target triple from a GCC one does not work
for s390. GCC uses "s390-linux" while clang expects "s390x-linux" or
"powerz-linux".
Add an explicit override.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20250620-tools-cross-s390-v2-1-ecda886e00e5@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5094bcb5b ]
Nolibc assumes that the kernel ABI is using a time values that are as
large as a long integer. For most ABIs this holds true.
But for x32 this is not correct, as it uses 32bit longs but 64bit times.
Also the 'struct stat' implementation of nolibc relies on timespec::tv_sec
and time_t being the same type. While timespec::tv_sec comes from the
kernel and is of type __kernel_old_time_t, time_t is defined within nolibc.
Switch to the __kernel_old_time_t to always get the correct type.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250712-nolibc-x32-v1-1-6d81cb798710@weissschuh.net
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04850819c6 ]
The kernel does not provide sys_futex() on 32-bit architectures that do not
support 32-bit time representations, such as riscv32.
As a result, glibc cannot define SYS_futex, causing compilation failures in
tests that rely on this syscall. Define SYS_futex as SYS_futex_time64 in
such cases to ensure successful compilation and compatibility.
Signed-off-by: Cynthia Huang <cynthia@andestech.com>
Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/all/20250710103630.3156130-1-ben717@andestech.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 084d2ac403 upstream.
Exercise various mmap(), munmap() and mremap() invocations, which might
cause a perf buffer mapping to be split or truncated.
To avoid hard coding the perf event and having dependencies on
architectures and configuration options, scan through event types in sysfs
and try to open them. On success, try to mmap() and if that succeeds try to
mmap() the AUX buffer.
In case that no AUX buffer supporting event is found, only test the base
buffer mapping. If no mappable event is found or permissions are not
sufficient, skip the tests.
Reserve a PROT_NONE region for both rb and aux tests to allow testing the
case where mremap unmaps beyond the end of a mapped VMA to prevent it from
unmapping unrelated mappings.
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Co-developed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4a6cdecaa1 ]
Since the commit e9846f5ead ("perf test: In forked mode add check that
fds aren't leaked"), the test "Breakpoint accounting" reports the error:
# perf test -vvv "Breakpoint accounting"
20: Breakpoint accounting:
--- start ---
test child forked, pid 373
failed opening event 0
failed opening event 0
watchpoints count 4, breakpoints count 6, has_ioctl 1, share 0
wp 0 created
wp 1 created
wp 2 created
wp 3 created
wp 0 modified to bp
wp max created
---- end(0) ----
Leak of file descriptor 7 that opened: 'anon_inode:[perf_event]'
A watchpoint's file descriptor was not properly released. This patch
fixes the leak.
Fixes: 032db28e5f ("perf tests: Add breakpoint accounting/modify test")
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250711-perf_fix_breakpoint_accounting-v1-1-b314393023f9@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e68b1c0098 ]
The work_atoms should be freed after use. Add free_work_atoms() to
make sure to release all. It should use list_splice_init() when merging
atoms to prevent accessing invalid pointers.
Fixes: b1ffe8f3e0 ("perf sched: Finish latency => atom rename and misc cleanups")
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250703014942.1369397-8-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 117e5c33b1 ]
It uses evsel->priv to save per-cpu timing information. It should be
freed when the evsel is released.
Add the priv destructor for evsel same as thread to handle that.
Fixes: 49394a2a24 ("perf sched timehist: Introduce timehist command")
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250703014942.1369397-6-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 867446f090 ]
The check that the new vector length we set was the expected one was typoed
to an assignment statement which for some reason the compilers didn't spot,
most likely due to the macros involved.
Fixes: a1d7111257 ("selftests: arm64: More comprehensively test the SVE ptrace interface")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Dev Jain <dev.jain@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250609-kselftest-arm64-ssve-fixups-v2-1-998fcfa6f240@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99fe8af069 ]
In function dump_xx_nlmsg(), when realloc() fails to allocate memory,
the original pointer to the buffer is overwritten with NULL. This causes
a memory leak because the previously allocated buffer becomes unreachable
without being freed.
Fixes: 7900efc192 ("tools/bpf: bpftool: improve output format for bpftool net")
Signed-off-by: Yuan Chen <chenyuan@kylinos.cn>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/r/20250620012133.14819-1-chenyuan_fl@163.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 213879061a ]
The subsystem event test enables all "sched" events and makes sure there's
at least 3 different events in the output. It used to cat the entire trace
file to | wc -l, but on slow machines, that could last a very long time.
To solve that, it was changed to just read the first 100 lines of the
trace file. This can cause false failures as some events repeat so often,
that the 100 lines that are examined could possibly be of only one event.
Instead, create an awk script that looks for 3 different events and will
exit out after it finds them. This will find the 3 events the test looks
for (eventually if it works), and still exit out after the test is
satisfied and not cause slower machines to run forever.
Link: https://lore.kernel.org/r/20250721134212.53c3e140@batman.local.home
Reported-by: Tengda Wu <wutengda@huaweicloud.com>
Closes: https://lore.kernel.org/all/20250710130134.591066-1-wutengda@huaweicloud.com/
Fixes: 1a4ea83a6e ("selftests/ftrace: Limit length in subsystem-enable tests")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b89732c8c8 ]
Successful syscalls don't change errno, so checking errno is wrong
to ensure that a syscall has failed. For example for the following
sequence:
prctl(PR_SET_SYSCALL_USER_DISPATCH, op, 0x0, 0xff, 0);
EXPECT_EQ(EINVAL, errno);
prctl(PR_SET_SYSCALL_USER_DISPATCH, op, 0x0, 0x0, &sel);
EXPECT_EQ(EINVAL, errno);
only the first syscall may fail and set errno, but the second may succeed
and keep errno intact, and the check will falsely pass.
Or if errno happened to be EINVAL before, even the first check may falsely
pass.
Also use EXPECT/ASSERT consistently. Currently there is an inconsistent mix
without obvious reasons for usage of one or another.
Fixes: 179ef03599 ("selftests: Add kselftest for syscall user dispatch")
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/af6a04dbfef9af8570f5bab43e3ef1416b62699a.1747839857.git.dvyukov@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit fdf0f60a2b upstream.
The checksum mode has been added a while ago, but it is only validated
when manually launching mptcp_connect.sh with "-C".
The different CIs were then not validating these MPTCP Connect tests
with checksum enabled. To make sure they do, add a new test program
executing mptcp_connect.sh with the checksum mode.
Fixes: 94d66ba1d8 ("selftests: mptcp: enable checksum in mptcp_connect.sh")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250715-net-mptcp-sft-connect-alt-v2-2-8230ddd82454@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 37848a456f upstream.
The "mmap" and "sendfile" alternate modes for mptcp_connect.sh/.c are
available from the beginning, but only tested when mptcp_connect.sh is
manually launched with "-m mmap" or "-m sendfile", not via the
kselftests helpers.
The MPTCP CI was manually running "mptcp_connect.sh -m mmap", but not
"-m sendfile". Plus other CIs, especially the ones validating the stable
releases, were not validating these alternate modes.
To make sure these modes are validated by these CIs, add two new test
programs executing mptcp_connect.sh with the alternate modes.
Fixes: 048d19d444 ("mptcp: add basic kselftest for mptcp")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250715-net-mptcp-sft-connect-alt-v2-1-8230ddd82454@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0e9418961f ]
The mentioned test is not very stable when running on top of
debug kernel build. Increase the inter-packet timeout to allow
more slack in such environments.
Fixes: 3327a9c463 ("selftests: add functionals test for UDP GRO")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/b0370c06ddb3235debf642c17de0284b2cd3c652.1752163107.git.pabeni@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a95743b530 upstream.
Some libc's like musl libc don't provide execinfo.h since it's not part of
POSIX. In order to fix compilation on musl, only include execinfo.h if
available (HAVE_BACKTRACE_SUPPORT)
This was discovered with c104c16073 ("Kunit to check the longest symbol
length") which starts to include linux/kallsyms.h with Alpine Linux'
configs.
Link: https://lkml.kernel.org/r/20250622014608.448718-1-fossdd@pwned.life
Fixes: c104c16073 ("Kunit to check the longest symbol length")
Signed-off-by: Achill Gilgenast <fossdd@pwned.life>
Cc: Luis Henriques <luis@igalia.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit aa485e8789 ]
When btf_dump__new() fails to allocate memory for the internal hashmap
(btf_dump->type_names), it returns an error code. However, the cleanup
function btf_dump__free() does not check if btf_dump->type_names is NULL
before attempting to free it. This leads to a null pointer dereference
when btf_dump__free() is called on a btf_dump object.
Fixes: 351131b51c ("libbpf: add btf_dump API for BTF-to-C conversion")
Signed-off-by: Yuan Chen <chenyuan@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250618011933.11423-1-chenyuan_fl@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ead7f9b8de upstream.
In Cilium, we use bpf_csum_diff + bpf_l4_csum_replace to, among other
things, update the L4 checksum after reverse SNATing IPv6 packets. That
use case is however not currently supported and leads to invalid
skb->csum values in some cases. This patch adds support for IPv6 address
changes in bpf_l4_csum_update via a new flag.
When calling bpf_l4_csum_replace in Cilium, it ends up calling
inet_proto_csum_replace_by_diff:
1: void inet_proto_csum_replace_by_diff(__sum16 *sum, struct sk_buff *skb,
2: __wsum diff, bool pseudohdr)
3: {
4: if (skb->ip_summed != CHECKSUM_PARTIAL) {
5: csum_replace_by_diff(sum, diff);
6: if (skb->ip_summed == CHECKSUM_COMPLETE && pseudohdr)
7: skb->csum = ~csum_sub(diff, skb->csum);
8: } else if (pseudohdr) {
9: *sum = ~csum_fold(csum_add(diff, csum_unfold(*sum)));
10: }
11: }
The bug happens when we're in the CHECKSUM_COMPLETE state. We've just
updated one of the IPv6 addresses. The helper now updates the L4 header
checksum on line 5. Next, it updates skb->csum on line 7. It shouldn't.
For an IPv6 packet, the updates of the IPv6 address and of the L4
checksum will cancel each other. The checksums are set such that
computing a checksum over the packet including its checksum will result
in a sum of 0. So the same is true here when we update the L4 checksum
on line 5. We'll update it as to cancel the previous IPv6 address
update. Hence skb->csum should remain untouched in this case.
The same bug doesn't affect IPv4 packets because, in that case, three
fields are updated: the IPv4 address, the IP checksum, and the L4
checksum. The change to the IPv4 address and one of the checksums still
cancel each other in skb->csum, but we're left with one checksum update
and should therefore update skb->csum accordingly. That's exactly what
inet_proto_csum_replace_by_diff does.
This special case for IPv6 L4 checksums is also described atop
inet_proto_csum_replace16, the function we should be using in this case.
This patch introduces a new bpf_l4_csum_replace flag, BPF_F_IPV6,
to indicate that we're updating the L4 checksum of an IPv6 packet. When
the flag is set, inet_proto_csum_replace_by_diff will skip the
skb->csum update.
Fixes: 7d672345ed ("bpf: add generic bpf_csum_diff helper")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/96a6bc3a443e6f0b21ff7b7834000e17fb549e05.1748509484.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f287822688 upstream.
When FRED is enabled, if the Trap Flag (TF) is set without an external
debugger attached, it can lead to an infinite loop in the SIGTRAP
handler. To avoid this, the software event flag in the augmented SS
must be cleared, ensuring that no single-step trap remains pending when
ERETU completes.
This test checks for that specific scenario—verifying whether the kernel
correctly prevents an infinite SIGTRAP loop in this edge case when FRED
is enabled.
The test should _always_ pass with IDT event delivery, thus no need to
disable the test even when FRED is not enabled.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250609084054.2083189-3-xin%40zytor.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8e64c387c9 ]
Recently as a side-effect of
commit ac053946f5 ("compiler.h: introduce TYPEOF_UNQUAL() macro")
issues were observed in deduplication between modules and kernel BTF
such that a large number of kernel types were not deduplicated so
were found in module BTF (task_struct, bpf_prog etc). The root cause
appeared to be a failure to dedup struct types, specifically those
with members that were pointers with __percpu annotations.
The issue in dedup is at the point that we are deduplicating structures,
we have not yet deduplicated reference types like pointers. If multiple
copies of a pointer point at the same (deduplicated) integer as in this
case, we do not see them as identical. Special handling already exists
to deal with structures and arrays, so add pointer handling here too.
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250429161042.2069678-1-alan.maguire@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a298bbab90 upstream.
When cross compiling the kernel with clang, we need to override
CLANG_CROSS_FLAGS when preparing the step libraries.
Prior to commit d1d0963121 ("tools: fix annoying "mkdir -p ..." logs
when building tools in parallel"), MAKEFLAGS would have been set to a
value that wouldn't set a value for CLANG_CROSS_FLAGS, hiding the
fact that we weren't properly overriding it.
Fixes: 56a2df7615 ("tools/resolve_btfids: Compile resolve_btfids as host program")
Signed-off-by: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20250606074538.1608546-1-suleiman@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a4a859eb67 ]
The comment of "--user-regs" option is not correct, fix it.
"on interrupt," -> "in user space,"
Fixes: 84c4174227 ("perf record: Support direct --user-regs arguments")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250403060810.196028-1-dapeng1.mi@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 628e124404 ]
The test might fail on the Arm64 platform with the error:
# perf test -vvv "Track with sched_switch"
Missing sched_switch events
#
The issue is caused by incorrect handling of timestamp comparisons. The
comparison result, a signed 64-bit value, was being directly cast to an
int, leading to incorrect sorting for sched events.
The case does not fail everytime, usually I can trigger the failure
after run 20 ~ 30 times:
# while true; do perf test "Track with sched_switch"; done
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : FAILED!
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : FAILED!
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
I used cross compiler to build Perf tool on my host machine and tested on
Debian / Juno board. Generally, I think this issue is not very specific
to GCC versions. As both internal CI and my local env can reproduce the
issue.
My Host Build compiler:
# aarch64-linux-gnu-gcc --version
aarch64-linux-gnu-gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0
Juno Board:
# lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 12 (bookworm)
Release: 12
Codename: bookworm
Fix this by explicitly returning 0, 1, or -1 based on whether the result
is zero, positive, or negative.
Fixes: d44bc55829 ("perf tests: Add a test for tracking with sched_switch")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250331172759.115604-1-leo.yan@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17e548405a ]
The script allows the user to enter patterns to find symbols.
The pattern matching characters are converted for use in SQL.
For PostgreSQL the conversion involves using the Python maketrans()
method which is slightly different in Python 3 compared with Python 2.
Fix to work in Python 3.
Fixes: beda0e725e ("perf script python: Add Python3 support to exported-sql-viewer.py")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tony Jones <tonyj@suse.de>
Link: https://lore.kernel.org/r/20250512093932.79854-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e00eac6b5b ]
The Fixes commit did not add support for decoding PEBS-via-PT data_src.
Fix by adding support.
PEBS-via-PT is a feature of some E-core processors, starting with
processors based on Tremont microarchitecture. Because the kernel only
supports Intel PT features that are on all processors, there is no support
for PEBS-via-PT on hybrids.
Currently that leaves processors based on Tremont, Gracemont and Crestmont,
however there are no events on Tremont that produce data_src information,
and for Gracemont and Crestmont there are only:
mem-loads event=0xd0,umask=0x5,ldlat=3
mem-stores event=0xd0,umask=0x6
Affected processors include Alder Lake N (Gracemont), Sierra Forest
(Crestmont) and Grand Ridge (Crestmont).
Example:
# perf record -d -e intel_pt/branch=0/ -e mem-loads/aux-output/pp uname
Before:
# perf.before script --itrace=o -Fdata_src
0 |OP No|LVL N/A|SNP N/A|TLB N/A|LCK No|BLK N/A
0 |OP No|LVL N/A|SNP N/A|TLB N/A|LCK No|BLK N/A
After:
# perf script --itrace=o -Fdata_src
10268100142 |OP LOAD|LVL L1 hit|SNP None|TLB L1 or L2 hit|LCK No|BLK N/A
10450100442 |OP LOAD|LVL L2 hit|SNP None|TLB L2 miss|LCK No|BLK N/A
Fixes: 975846eddf ("perf intel-pt: Add memory information to synthesized PEBS sample")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250512093932.79854-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1741189d84 ]
In 7cecb7fe83 ("perf hists: Move sort__has_comm into struct
perf_hpp_list") it assumes that act->thread is set prior to calling
do_zoom_thread().
This doesn't happen when we use ESC or the Left arrow key to Zoom out of
a specific thread, making this operation not to work and we get stuck
into the thread zoom.
In 6422184b08 ("perf hists browser: Simplify zooming code using
pstack_peek()") it says no need to set actions->thread, and at that
point that was true, but in 7cecb7fe83 a actions->thread == NULL
check was added before the zoom out of thread could kick in.
We can zoom out using the alternative 't' thread zoom toggle hotkey to
finally set actions->thread before calling do_zoom_thread() and zoom
out, but lets also fix the ESC/Zoom out of thread case.
Fixes: 7cecb7fe83 ("perf hists: Move sort__has_comm into struct perf_hpp_list")
Reported-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/Z_TYux5fUg2pW-pF@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4fce4b91fd ]
While working on 'perf version --build-options' I noticed that:
$ perf version --build-options
perf version 6.15.rc1.g312a07a00d31
aio: [ on ] # HAVE_AIO_SUPPORT
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
bpf_skeletons: [ on ] # HAVE_BPF_SKEL
debuginfod: [ OFF ] # HAVE_DEBUGINFOD_SUPPORT
<SNIP>
And looking at tools/perf/Makefile.config I also noticed that it is not
opt-in, meaning we will attempt to build with it in all normal cases.
So add the usual warning at build time to let the user know that
something recommended is missing, now we see:
Makefile.config:563: No elfutils/debuginfod.h found, no debuginfo server support, please install elfutils-debuginfod-client-devel or equivalent
And after following the recommendation:
$ perf check feature debuginfod
debuginfod: [ on ] # HAVE_DEBUGINFOD_SUPPORT
$ ldd ~/bin/perf | grep debuginfo
libdebuginfod.so.1 => /lib64/libdebuginfod.so.1 (0x00007fee5cf5f000)
$
With this feature on several perf tools will fetch what is needed and
not require all the contents of the debuginfo packages, for instance:
# rpm -qa | grep kernel-debuginfo
# pahole --running_kernel_vmlinux
pahole: couldn't find a vmlinux that matches the running kernel
HINT: Maybe you're inside a container or missing a debuginfo package?
#
# perf trace -e open* perf probe --vars icmp_rcv
0.000 ( 0.005 ms): perf/97391 openat(dfd: CWD, filename: "/etc/ld.so.cache", flags: RDONLY|CLOEXEC) = 3
0.014 ( 0.004 ms): perf/97391 openat(dfd: CWD, filename: "/lib64/libm.so.6", flags: RDONLY|CLOEXEC) = 3
<SNIP>
32130.100 ( 0.008 ms): perf/97391 openat(dfd: CWD, filename: "/root/.cache/debuginfod_client/aa3c82b4a13f9c0e0301bebb20fe958c4db6f362/debuginfo") = 3
<SNIP>
Available variables at icmp_rcv
@<icmp_rcv+0>
struct sk_buff* skb
<SNIP>
#
# pahole --running_kernel_vmlinux
/root/.cache/debuginfod_client/aa3c82b4a13f9c0e0301bebb20fe958c4db6f362/debuginfo
# file /root/.cache/debuginfod_client/aa3c82b4a13f9c0e0301bebb20fe958c4db6f362/debuginfo
/root/.cache/debuginfod_client/aa3c82b4a13f9c0e0301bebb20fe958c4db6f362/debuginfo: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, BuildID[sha1]=aa3c82b4a13f9c0e0301bebb20fe958c4db6f362, with debug_info, not stripped
# ls -la /root/.cache/debuginfod_client/aa3c82b4a13f9c0e0301bebb20fe958c4db6f362/debuginfo
-r--------. 1 root root 475401512 Mar 27 21:00 /root/.cache/debuginfod_client/aa3c82b4a13f9c0e0301bebb20fe958c4db6f362/debuginfo
#
Then, cached:
# perf stat --null perf probe --vars icmp_rcv
Available variables at icmp_rcv
@<icmp_rcv+0>
struct sk_buff* skb
Performance counter stats for 'perf probe --vars icmp_rcv':
0.671389041 seconds time elapsed
0.519176000 seconds user
0.150860000 seconds sys
Fixes: c7a14fdcb3 ("perf build-ids: Fall back to debuginfod query if debuginfo not found")
Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Link: https://lore.kernel.org/r/Z_dkNDj9EPFwPqq1@gmail.com
[ Folded patch from Ingo to have the debian/ubuntu devel package added build warning message ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd5fd538a1 ]
Return value of the validate_nla() function can be propagated all the
way up to users of libbpf API. In case of error this libbpf version
of validate_nla returns -1 which will be seen as -EPERM from user's
point of view. Instead, return a more reasonable -EINVAL.
Fixes: bbf48c18ee ("libbpf: add error reporting in XDP")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250510182011.2246631-1-a.s.protopopov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41d4ce6df3 ]
With the latest LLVM bpf selftests build will fail with
the following error message:
progs/profiler.inc.h:710:31: error: default initialization of an object of type 'typeof ((parent_task)->real_cred->uid.val)' (aka 'const unsigned int') leaves the object uninitialized and is incompatible with C++ [-Werror,-Wdefault-const-init-unsafe]
710 | proc_exec_data->parent_uid = BPF_CORE_READ(parent_task, real_cred, uid.val);
| ^
tools/testing/selftests/bpf/tools/include/bpf/bpf_core_read.h:520:35: note: expanded from macro 'BPF_CORE_READ'
520 | ___type((src), a, ##__VA_ARGS__) __r; \
| ^
This happens because BPF_CORE_READ (and other macro) declare the
variable __r using the ___type macro which can inherit const modifier
from intermediate types.
Fix this by using __typeof_unqual__, when supported. (And when it
is not supported, the problem shouldn't appear, as older compilers
haven't complained.)
Fixes: 792001f4f7 ("libbpf: Add user-space variants of BPF_CORE_READ() family of macros")
Fixes: a4b09a9ef9 ("libbpf: Add non-CO-RE variants of BPF_CORE_READ() macro family")
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250502193031.3522715-1-a.s.protopopov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 358b1c0f56 ]
Return values of the linker_append_sec_data() and the
linker_append_elf_relos() functions are propagated all the
way up to users of libbpf API. In some error cases these
functions return -1 which will be seen as -EPERM from user's
point of view. Instead, return a more reasonable -EINVAL.
Fixes: faf6ed321c ("libbpf: Add BPF static linker APIs")
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250430120820.2262053-1-a.s.protopopov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee684de5c1 ]
As shown in [1], it is possible to corrupt a BPF ELF file such that
arbitrary BPF instructions are loaded by libbpf. This can be done by
setting a symbol (BPF program) section offset to a large (unsigned)
number such that <section start + symbol offset> overflows and points
before the section data in the memory.
Consider the situation below where:
- prog_start = sec_start + symbol_offset <-- size_t overflow here
- prog_end = prog_start + prog_size
prog_start sec_start prog_end sec_end
| | | |
v v v v
.....................|################################|............
The report in [1] also provides a corrupted BPF ELF which can be used as
a reproducer:
$ readelf -S crash
Section Headers:
[Nr] Name Type Address Offset
Size EntSize Flags Link Info Align
...
[ 2] uretprobe.mu[...] PROGBITS 0000000000000000 00000040
0000000000000068 0000000000000000 AX 0 0 8
$ readelf -s crash
Symbol table '.symtab' contains 8 entries:
Num: Value Size Type Bind Vis Ndx Name
...
6: ffffffffffffffb8 104 FUNC GLOBAL DEFAULT 2 handle_tp
Here, the handle_tp prog has section offset ffffffffffffffb8, i.e. will
point before the actual memory where section 2 is allocated.
This is also reported by AddressSanitizer:
=================================================================
==1232==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7c7302fe0000 at pc 0x7fc3046e4b77 bp 0x7ffe64677cd0 sp 0x7ffe64677490
READ of size 104 at 0x7c7302fe0000 thread T0
#0 0x7fc3046e4b76 in memcpy (/lib64/libasan.so.8+0xe4b76)
#1 0x00000040df3e in bpf_object__init_prog /src/libbpf/src/libbpf.c:856
#2 0x00000040df3e in bpf_object__add_programs /src/libbpf/src/libbpf.c:928
#3 0x00000040df3e in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3930
#4 0x00000040df3e in bpf_object_open /src/libbpf/src/libbpf.c:8067
#5 0x00000040f176 in bpf_object__open_file /src/libbpf/src/libbpf.c:8090
#6 0x000000400c16 in main /poc/poc.c:8
#7 0x7fc3043d25b4 in __libc_start_call_main (/lib64/libc.so.6+0x35b4)
#8 0x7fc3043d2667 in __libc_start_main@@GLIBC_2.34 (/lib64/libc.so.6+0x3667)
#9 0x000000400b34 in _start (/poc/poc+0x400b34)
0x7c7302fe0000 is located 64 bytes before 104-byte region [0x7c7302fe0040,0x7c7302fe00a8)
allocated by thread T0 here:
#0 0x7fc3046e716b in malloc (/lib64/libasan.so.8+0xe716b)
#1 0x7fc3045ee600 in __libelf_set_rawdata_wrlock (/lib64/libelf.so.1+0xb600)
#2 0x7fc3045ef018 in __elf_getdata_rdlock (/lib64/libelf.so.1+0xc018)
#3 0x00000040642f in elf_sec_data /src/libbpf/src/libbpf.c:3740
The problem here is that currently, libbpf only checks that the program
end is within the section bounds. There used to be a check
`while (sec_off < sec_sz)` in bpf_object__add_programs, however, it was
removed by commit 6245947c1b ("libbpf: Allow gaps in BPF program
sections to support overriden weak functions").
Add a check for detecting the overflow of `sec_off + prog_sz` to
bpf_object__init_prog to fix this issue.
[1] https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md
Fixes: 6245947c1b ("libbpf: Allow gaps in BPF program sections to support overriden weak functions")
Reported-by: lmarch2 <2524158037@qq.com>
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md
Link: https://lore.kernel.org/bpf/20250415155014.397603-1-vmalik@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 797002deed ]
The inconsistencies in the systcall ABI between arm and arm-compat can
can cause a failure in the syscall_restart test due to the logic
attempting to work around the differences. The 'machine' field for an
ARM64 device running in compat mode can report 'armv8l' or 'armv8b'
which matches with the string 'arm' when only examining the first three
characters of the string.
This change adds additional validation to the workaround logic to make
sure we only take the arm path when running natively, not in arm-compat.
Fixes: 256d0afb11 ("selftests/seccomp: build and pass on arm64")
Signed-off-by: Neill Kapron <nkapron@google.com>
Link: https://lore.kernel.org/r/20250427094103.3488304-2-nkapron@google.com
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0053f7d39d ]
The `readlink(path, buf, sizeof(buf))` call reads at most sizeof(buf)
bytes and *does not* append null-terminator to buf. With respect to
that, fix two pieces in get_fd_type:
1. Change the truncation check to contain sizeof(buf) rather than
sizeof(path).
2. Append null-terminator to buf.
Reported by Coverity.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20250129071857.75182-1-vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08fafac4c9 ]
As noted in [0], SeaBIOS (QEMU default) makes a mess of the terminal,
qboot does not.
It turns out this is actually useful with kunit.py, since the user is
exposed to this issue if they set --raw_output=all.
qboot is also faster than SeaBIOS, but it's is marginal for this
usecase.
[0] https://lore.kernel.org/all/CA+i-1C0wYb-gZ8Mwh3WSVpbk-LF-Uo+njVbASJPe1WXDURoV7A@mail.gmail.com/
Both SeaBIOS and qboot are x86-specific.
Link: https://lore.kernel.org/r/20250124-kunit-qboot-v1-1-815e4d4c6f7c@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 236d391011 ]
In `set_kcfg_value_str`, an untrusted string is accessed with the assumption
that it will be at least two characters long due to the presence of checks for
opening and closing quotes. But the check for the closing quote
(value[len - 1] != '"') misses the fact that it could be checking the opening
quote itself in case of an invalid input that consists of just the opening
quote.
This commit adds an explicit check to make sure the string is at least two
characters long.
Signed-off-by: Nandakumar Edamana <nandakumar@nandakumar.co.in>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250221210110.3182084-1-nandakumar@nandakumar.co.in
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 784e6abd99 ]
Modify gro.sh to return a useful exit code when the -t flag is used. It
formerly returned 0 no matter what.
Tested: Ran `gro.sh -t large` and verified that test failures return 1.
Signed-off-by: Kevin Krakauer <krakauer@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250226192725.621969-2-krakauer@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 935e7cb5bb ]
Separate test log files from object files. Depend on test log output
but don't pass to the linker.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250311213628.569562-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1a9dda74d ]
If opts.uaccess isn't set, the uaccess validation is disabled, but only
partially: it doesn't read the uaccess_safe_builtin list but still tries
to do the validation. Disable it completely to prevent false warnings.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/0e95581c1d2107fb5f59418edf2b26bba38b0cbb.1742852846.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ab00ddd802 upstream.
When running mm selftest to verify mm patches, 'compaction_test' case
failed on an x86 server with 1TB memory. And the root cause is that it
has too much free memory than what the test supports.
The test case tries to allocate 100000 huge pages, which is about 200 GB
for that x86 server, and when it succeeds, it expects it's large than 1/3
of 80% of the free memory in system. This logic only works for platform
with 750 GB ( 200 / (1/3) / 80% ) or less free memory, and may raise false
alarm for others.
Fix it by changing the fixed page number to self-adjustable number
according to the real number of free memory.
Link: https://lkml.kernel.org/r/20250423103645.2758-1-feng.tang@linux.alibaba.com
Fixes: bd67d5c15c ("Test compaction of mlocked memory")
Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com>
Acked-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@inux.alibaba.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sri Jayaramappa <sjayaram@akamai.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3545deff0e ]
The p_align values in PT_LOAD were ignored for static PIE executables
(i.e. ET_DYN without PT_INTERP). This is because there is no way to
request a non-fixed mmap region with a specific alignment. ET_DYN with
PT_INTERP uses a separate base address (ELF_ET_DYN_BASE) and binfmt_elf
performs the ASLR itself, which means it can also apply alignment. For
the mmap region, the address selection happens deep within the vm_mmap()
implementation (when the requested address is 0).
The earlier attempt to implement this:
commit 9630f0d60f ("fs/binfmt_elf: use PT_LOAD p_align values for static PIE")
commit 925346c129 ("fs/binfmt_elf: fix PT_LOAD p_align values for loaders")
did not take into account the different base address origins, and were
eventually reverted:
aeb7923733 ("revert "fs/binfmt_elf: use PT_LOAD p_align values for static PIE"")
In order to get the correct alignment from an mmap base, binfmt_elf must
perform a 0-address load first, then tear down the mapping and perform
alignment on the resulting address. Since this is slightly more overhead,
only do this when it is needed (i.e. the alignment is not the default
ELF alignment). This does, however, have the benefit of being able to
use MAP_FIXED_NOREPLACE, to avoid potential collisions.
With this fixed, enable the static PIE self tests again.
Reported-by: H.J. Lu <hjl.tools@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=215275
Link: https://lore.kernel.org/r/20240508173149.677910-3-keescook@chromium.org
Signed-off-by: Kees Cook <kees@kernel.org>
Stable-dep-of: 11854fe263 ("binfmt_elf: Move brk for static PIE even if ASLR disabled")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b57a2907c9 ]
After commit 4d1cd3b2c5 ("tools/testing/selftests/exec: fix link
error"), the load address alignment tests tried to build statically.
This was silently ignored in some cases. However, after attempting to
further fix the build by switching to "-static-pie", the test started
failing. This appears to be due to non-PT_INTERP ET_DYN execs ("static
PIE") not doing alignment correctly, which remains unfixed[1]. See commit
aeb7923733 ("revert "fs/binfmt_elf: use PT_LOAD p_align values for
static PIE"") for more details.
Provide rules to build both static and non-static PIE binaries, improve
debug reporting, and perform several test steps instead of a single
all-or-nothing test. However, do not actually enable static-pie tests;
alignment specification is only supported for ET_DYN with PT_INTERP
("regular PIE").
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215275 [1]
Link: https://lore.kernel.org/r/20240508173149.677910-1-keescook@chromium.org
Signed-off-by: Kees Cook <kees@kernel.org>
Stable-dep-of: 11854fe263 ("binfmt_elf: Move brk for static PIE even if ASLR disabled")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c409506773 ]
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240304155928.1818928-2-usama.anjum@collabora.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Stable-dep-of: 11854fe263 ("binfmt_elf: Move brk for static PIE even if ASLR disabled")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 197c1eaa7b ]
When running the mincore_selftest on a system with an XFS file system, it
failed the "check_file_mmap" test case due to the read-ahead pages reaching
the end of the file. The failure log is as below:
RUN global.check_file_mmap ...
mincore_selftest.c:264:check_file_mmap:Expected i (1024) < vec_size (1024)
mincore_selftest.c:265:check_file_mmap:Read-ahead pages reached the end of the file
check_file_mmap: Test failed
FAIL global.check_file_mmap
This is because the read-ahead window size of the XFS file system on this
machine is 4 MB, which is larger than the size from the #PF address to the
end of the file. As a result, all the pages for this file are populated.
blockdev --getra /dev/nvme0n1p5
8192
blockdev --getbsz /dev/nvme0n1p5
512
This issue can be fixed by extending the current FILE_SIZE 4MB to a larger
number, but it will still fail if the read-ahead window size of the file
system is larger enough. Additionally, in the real world, read-ahead pages
reaching the end of the file can happen and is an expected behavior.
Therefore, allowing read-ahead pages to reach the end of the file is a
better choice for the "check_file_mmap" test case.
Link: https://lore.kernel.org/r/20250311080940.21413-1-qiuxu.zhuo@intel.com
Reported-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
