This converts the PCM3008 driver to look up the GPIO lines
using descriptors.
Apparently there are no in-tree users of the platform data
struct, so users need to adopt.
New users can associate the GPIO lines with the platform
device "pcm3008-codec".
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250312-pcm-codecs-v1-2-41ffc4f8fc5c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy GPIO header <linux/gpio.h>
but does not use any symbols from it so drop the include.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250312-pcm-codecs-v1-1-41ffc4f8fc5c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The former code sets the V slot from inside set_bitwidth according to
the bitwidth of the PCM format. That's wrong, since:
* It overrides the V slot parsed from DT binding.
* The V slot is set shifted behind the I slot by the length of the PCM
bitwidth, but the PCM bitwidth has no assured relation to the TDM
slot width.
Replace the former logic by setting up the I/V sense transmission only
in case of both I/V slots being specified in devicetree, and never
override those values. In case the slots are left unspecified, disable
the transmission completely.
There's an improbable case someone is relying on the old behavior, but
if so, that's a setup that only works by accident, and cannot be sanely
supported going forward. There's no indication anyone is consuming the
I/V sense data up to today, so break the former behavior.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-6-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new explicit function for the setting of I/V sense TDM slots.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-5-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add control to expose the option of autoretry behavior on overcurrent
events in the codec.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-4-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SN012776 is a speaker amp chip found in Apple's 2021 laptops. It appears
similar and more-or-less compatible to TAS2764. Extend the TAS2764
driver with some SN012776 specifics and configure the chip assuming
it's in one of the Apple machines.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-3-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The custom suspend function causes a build warning when CONFIG_PM_SLEEP
is disabled:
sound/soc/codecs/cs42l43.c:2405:12: error: unused function 'cs42l43_codec_runtime_force_suspend' [-Werror,-Wunused-function]
Change SET_SYSTEM_SLEEP_PM_OPS() to the newer SYSTEM_SLEEP_PM_OPS(),
to avoid this.
Fixes: 164b7dd454 ("ASoC: cs42l43: Add jack delay debounce after suspend")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250305172738.3437513-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Free some resources in the error handling path of the probe, as already
done in the remove function.
Fixes: e3523e0186 ("ASoC: wm0010: Add initial wm0010 DSP driver")
Fixes: fd8b965744 ("ASoC: wm0010: Clear IRQ as wake source and include missing header")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/5139ba1ab8c4c157ce04e56096a0f54a1683195c.1741549792.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the return value from spi_setup() is not checked for a failure.
It is unlikely it will ever fail in this particular case but it is still
better to add this check for the sake of completeness and correctness. This
is cheap since it is performed once when the device is being probed.
Handle spi_setup() return value.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: 872fc0b6bd ("ASoC: cs35l41: Set the max SPI speed for the whole device")
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru>
Link: https://patch.msgid.link/20250304115643.2748-1-v.shevtsov@mt-integration.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
SDW_SDCA_CTL(FUNC_NUM_MIC_ARRAY, RT722_SDCA_ENT_FU15,
RT722_SDCA_CTL_FU_CH_GAIN, CH_01) ... SDW_SDCA_CTL(FUNC_NUM_MIC_ARRAY,
RT722_SDCA_ENT_FU15, RT722_SDCA_CTL_FU_CH_GAIN, CH_04) are used by the
"FU15 Boost Volume" control, but not marked as readable.
And the mbq size are 2 for those registers.
Fixes: 7f5d6036ca ("ASoC: rt722-sdca: Add RT722 SDCA driver")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20250310080440.58797-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The custom suspend function causes a build warning when CONFIG_PM_SLEEP
is disabled:
sound/soc/codecs/cs42l43.c:2405:12: error: unused function 'cs42l43_codec_runtime_force_suspend' [-Werror,-Wunused-function]
Change SET_SYSTEM_SLEEP_PM_OPS() to the newer SYSTEM_SLEEP_PM_OPS(),
to avoid this.
Fixes: 164b7dd454 ("ASoC: cs42l43: Add jack delay debounce after suspend")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250305172738.3437513-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The changes to DECLARE_ADAU17X1_DSP_MUX_CTRL did avoid the issue with a
compiler not liking all the macro indirection. However it introduced a
new issue with respect to the mux not being declared static:
sound/soc/codecs/adau17x1.c:275:8: sparse: sparse: symbol
'adau17x1_dac_mux' was not declared. Should it be static?
sound/soc/codecs/adau17x1.c:278:8: sparse: sparse: symbol
'adau17x1_capture_mux' was not declared. Should it be static?
Fix this up by going back to the inline declaration of the soc_enum, but
just call SOC_ENUM_EXT directly rather than indirecting through
SOC_DAPM_ENUM_EXT.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503061119.4QGlnOi6-lkp@intel.com/
Fixes: c951b20766 ("ASoC: dapm: Use ASoC control macros where possible")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250306104233.1638625-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
"generic_new_peripheral_assigned: invalid dev_num 1, wake supported 1"
is reported by our internal CI test.
Rt1320's wake feature is not used in Linux and that's why it is not in
the wake_capable_list[] list in intel_auxdevice.c.
However, BIOS may set it as wake-capable. Overwrite wake_capable to 0
in the codec driver to align with wake_capable_list[].
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20250305134113.201326-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Tidy up the ASoC control value macros. Fix some drivers that should be
using core macros that aren't, combine the existing core macros to be
a little more consistent in style, and update the core macros to use
each other where possible.
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
The series aims to streamline the formatting for ACPI IDs so that a
single pattern can be used to identify the device.
Work implicitly suggested by Andy Shevchenko - reading and learning from
number of his reviews on the Linux mailing lists.
Several formats do exists, however, after technical discussion PCI-based
format has been selected as the recommended one. For Realtek devices, it
is going to be 10ECxxxx where 10EC unambiguously identifies Realtek
company whereas the following 4 hexes specify the PART_ID i.e.: the
device.
While at it, there shall be no comma after the terminator entry and
initializing fields with 0 for statically defined structs is redundant.
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
We have both
(A) SND_SOC_DAIFMT_CB{M/S}_CF{M/S} : Master/Slave.
(B) SND_SOC_DAIFMT_CB{P/C}_CF{P/S} : Provider/Consumer
We should use (B), and want to remove (A). This patch-set do it.
Hardware reports jack absent after reset/suspension regardless of jack
state, so introduce an additional delay only in suspension case to allow
proper detection to take place after a short delay.
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250304140504.139245-1-mstrozek@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A recent dtbs_check error fix in mt6359.dtsi file changed a node name
(from "mt6359codec" to "audio-codec") without modifying the mt6539
codec code that uses it.
It leads to a probe failure after devicetree parsing returns in error:
```
[ 1.354025] mt6359-sound mt6359-sound: mt6359_platform_driver_probe() failed to parse dts
[ 1.355066] mt6359-sound mt6359-sound: probe with driver mt6359-sound failed with error -22
```
So, add the child node retrieval with the new name and if not found,
try with the older one for backward compatibility.
Fixes: 76b35f59bb ("arm64: dts: mediatek: mt6359: fix dtbs_check error for audio-codec")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://patch.msgid.link/20250228-mt6359-fix-probe-failed-v1-1-64941d387b2c@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update the DAPM kcontrol creation macros to use the ASoC macros where a
helpful version exists. One minor fixup is required in adau17x1, the
compiler doesn't like the extra level of macro indirection coupled with
the inline struct definition. Make the struct definition explicit.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250303171424.444556-12-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt715 does not appear to use the SOC_DOUBLE_R_EXT() macro and even
if it did, the macro is defined identically in the ASoC headers.
Remove the redundant macro definitions.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250303171424.444556-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Temperatures are reported in units of Celsius however hwmon expects
values to be in millidegree of Celsius. Userspace tools observe values
close to zero and report it as "Not available" or incorrect values like
0C or 1C. Add a simple conversion to fix that.
Before the change:
wsa884x-virtual-0
Adapter: Virtual device
temp1: +0.0°C
--
wsa884x-virtual-0
Adapter: Virtual device
temp1: +0.0°C
Also reported as N/A before first amplifier power on.
After this change and initial wsa884x power on:
wsa884x-virtual-0
Adapter: Virtual device
temp1: +39.0°C
--
wsa884x-virtual-0
Adapter: Virtual device
temp1: +37.0°C
Tested on sm8550 only.
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://patch.msgid.link/20250221044024.1207921-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Read temperature of the amplifier and expose it via hwmon interface, which
will be later used during calibration of speaker protection algorithms.
The method is the same as for wsa884x and therefore this is based on
Krzysztof Kozlowski's approach implemented in commit 6b99dc62d9 ("ASoC:
codecs: wsa884x: Implement temperature reading and hwmon").
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org> #Thinkpad X13s
Link: https://patch.msgid.link/20250221032141.1206902-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>