Commit graph

354,836 commits

Author SHA1 Message Date
Arend Van Spriel
efc2c1fa8e brcmfmac: add support multi-scheduled scan
This change adds support for multi-scheduled scan in the driver. It
currently relies on g-scan support in firmware and will set struct
wiphy::max_sched_scan_reqs accordingly. This is limited to 16 concurrent
requests.

The firmware currently has a limit of 64 channels that can be configured
for all requests in total regardless whether there are duplicates. So if
a request uses 35 channels there are 29 channels left for another request.
When user-space does not specify any channels cfg80211 will add all
channels defined by the wiphy instance to the request, which makes
reaching the limit rather easy for dual-band devices.

Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13 09:57:49 +03:00
Kalle Valo
833689044e First batch of iwlwifi driver patches 4.13
* Loads of FW API documentation improvements (for tools and htmldoc);
 * Continued work for the new A000 family;
 * Bumped the maximum supported FW API to 31;
 * Improve the differentiation between 8000, 9000 and A000 families;
 * A lot of fixes and cleanups here and there;
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEF3LNfgb2BPWm68smoUecoho8xfoFAlk3AR8ACgkQoUecoho8
 xfr21w//YzwKCVCR568wtQ0kZwLaPUos/FCeEgrFCpcAEe//wZZFZphH/z4mOLmX
 xXRYmqYaQuztfqUKO/7Onw2djuXQNJJtHp+AdCCnzyMLKz6F6YbBG+M3755nM2Wl
 XDVNbmRsmlGKvc2RCSoTSXSdNiT9TND9nYyzPFl/4x+fSD9olsjPvIVk1sNn2o69
 znrcPJZJWVeYB/1uqLTqOQ0Xdm9r4tEYnnI+VsRMlwsOBQp6kgPMHEjoZdrV3RGI
 qzgu0WNnAqqy1W2QOAi6iiU1jLm5VJ9CKyTT/m/4u9GypfUOm0mBKWuykB5klswH
 6lJWz/P4dK7WZg7udCySeQrXbwiIlH0HF8uUoabDJHJd7LUXvEAljsYzG9B/cU0g
 s4/2fA13eGDKf5vJULHQKLD4OJf82S7YhMiMM855pj/xVa1FZpupVACJ1cWik4n+
 MlK8scXllrrjuFG1C7VDq7Jj3uY1ZxIN+TtuUl5vzgJ4n7buqqOcetDN07XqIwGZ
 HLoA5uhdyr12mUDbtiicq9q/wu3bFD1CMDllINoBcmh7Psr1Vng0hhWsLJigvTUI
 5+fKOYMNznjrBmcVvI/ZgRVW1Zo7+XCEOQpu25zOmoP/5vIpc2yA7kDvUgDfyzhw
 3+KL+rw6IX3kfOWIuJTMq6iMtFIdRTc0K5zndC972maXUAE3wWY=
 =oYeO
 -----END PGP SIGNATURE-----

Merge tag 'iwlwifi-next-for-kalle-2017-06-06' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next

First batch of iwlwifi driver patches 4.13

* Loads of FW API documentation improvements (for tools and htmldoc);
* Continued work for the new A000 family;
* Bumped the maximum supported FW API to 31;
* Improve the differentiation between 8000, 9000 and A000 families;
* A lot of fixes and cleanups here and there;

kvalo: There were conflicts iwl_mvm_stop_device() and
iwl_mvm_tcool_set_cur_state(). The former was easy but latter needed more
thought. Apparently the mutex was taken too late, so I fixed so that the mutex
is taken first and then check for iwl_mvm_firmware_running().
2017-06-12 19:29:39 +03:00
David S. Miller
63a2f310d0 wireless-drivers-next patches for 4.13
The first pull request for 4.13. We have a new driver qtnfmac, but
 also rsi driver got a support for new firmware and supporting ath10k
 SDIO devices was started.
 
 Major changes:
 
 ath10k
 
 * add initial SDIO support (still work in progress)
 
 rsi
 
 * new loading for the new firmware version
 
 rtlwifi
 
 * final patches for the new btcoex support
 
 rt2x00
 
 * add device ID for Epson WN7512BEP
 
 qtnfmac
 
 * new driver for Quantenna QSR10G chipsets
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJZPpCkAAoJEG4XJFUm622bUTMH/ipenw7p7otrhw9qtSBcqBRJ
 hS+1i2J+VXDXptFng0ziPWVv6mvhANvBszuOmiNMOgqjx2HrVknwlKUKViklHN3p
 E1PE3/A3bRpzBjMk4j8r/Z7VJK3rDa4WSi/AMJtqV9noNm5FfiOrCk7rXm2MLBns
 x1Wyr/7OX12hiB4SCoOuOZqS/TvHlNCW71BoyRruq01N2MA1iSonLCYJbovgi7Ds
 9acAY90PF8jLC+o7wxYkwuRqWncNhnKOsVNhc/6DKH91zB+C5sw2NGfD3WMfot/Z
 9uC5nBWNadoLGi636y+9evIRgNAFCczCZZSUeY7jMWiVn7XyFy8zoc4fv2ZSBto=
 =6md1
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-next-for-davem-2017-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.13

The first pull request for 4.13. We have a new driver qtnfmac, but
also rsi driver got a support for new firmware and supporting ath10k
SDIO devices was started.

Major changes:

ath10k

* add initial SDIO support (still work in progress)

rsi

* new loading for the new firmware version

rtlwifi

* final patches for the new btcoex support

rt2x00

* add device ID for Epson WN7512BEP

qtnfmac

* new driver for Quantenna QSR10G chipsets
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-12 10:14:29 -04:00
Niklas Söderlund
78d6102256 sh_eth: add support for changing MTU
The hardware supports the MTU to be changed and the driver it self is
somewhat prepared to support this. This patch hooks up the callbacks to
be able to change the MTU from user-space.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-12 09:57:52 -04:00
David S. Miller
66e037ca57 mlx5-updates-2017-06-11
This series provides updates to mlx5 header rewrite feature, from Or Gerlitz.
 and three more small updates From maor and eran.
 
 -------
 Or says:
 
 Packets belonging to flows which are different by matching may still need
 to go through the same header re-writes (e.g set the current routing hop
 MACs and issue TTL decrement).  To minimize the number of modify header
 IDs, we add a cache for header re-write IDs which is keyed by the binary
 chain of modify header actions.
 
 The caching is supported for both eswitch and NIC use-cases, where the
 actual conversion of the code to use caching comes in separate patches,
 one per use-case.
 
 Using a per field mask field, the TC pedit action supports modifying
 partial fields. The last patch enables offloading that.
 -------
 
 From Maor, update flow table commands layout to the latest HW spec.
 From Eran, ethtool connector type reporting updates.
 
 Thanks,
 Saeed.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJZPUrBAAoJEEg/ir3gV/o+ptQH+gIXfHH1mrJp0ZwM/hhLidYE
 Bj/ie9Y1Ir6q3RU2+g/NLqejtvTIzAyhMfiq4ag4eCVVRuGGjPXRZJWivWXUCbjm
 /XLaXTK62qNxJNAWyzgxEJSUI1URMtQWIf9SF8LMLGiNfZfx8b7o/Q08P18tNxbb
 AeNzmgYetva9lBialWF0dPDaAvd8THngBPF7LYDWghEXbDPvYTfvABN0qUrHs1s2
 /LbmZ7L9U+RDSusz/klYW+/WorNiOm44nwk+KgdnsrVITZVVfblI6VEvgEjprhZF
 c3SFUPYz079WjndNHVWezqsl4gIZIoM9FAtmoiBg+hxTmWJVI9uwllUcarW9s+k=
 =0Cyo
 -----END PGP SIGNATURE-----

Merge tag 'mlx5-updates-2017-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-updates-2017-06-11

This series provides updates to mlx5 header rewrite feature, from Or Gerlitz.
and three more small updates From maor and eran.

-------
Or says:

Packets belonging to flows which are different by matching may still need
to go through the same header re-writes (e.g set the current routing hop
MACs and issue TTL decrement).  To minimize the number of modify header
IDs, we add a cache for header re-write IDs which is keyed by the binary
chain of modify header actions.

The caching is supported for both eswitch and NIC use-cases, where the
actual conversion of the code to use caching comes in separate patches,
one per use-case.

Using a per field mask field, the TC pedit action supports modifying
partial fields. The last patch enables offloading that.
-------

From Maor, update flow table commands layout to the latest HW spec.
From Eran, ethtool connector type reporting updates.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-11 18:10:42 -04:00
Grygorii Strashko
6d307f6b09 net: ethernet: ti: cpdma: do not enable host error misc irq
CPSW driver does not handle this interrupt, so there are no reasons to enable
it in hardware.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-10 22:10:13 -04:00
Grygorii Strashko
e9523a5a32 net: ethernet: ti: cpsw: enable HWTSTAMP_FILTER_PTP_V1_L4_EVENT filter
CPSW driver supports PTP v1 messages, but for unknown reasons this filter
is not advertised. As result,
./tools/testing/selftests/networking/timestamping/timestamping utility
can't be used for testing of CPSW RX timestamping with option
SOF_TIMESTAMPING_RX_HARDWARE, because it uses
HWTSTAMP_FILTER_PTP_V1_L4_SYNC filter.

Hence, fix it by advertising HWTSTAMP_FILTER_PTP_V1_L4_XXX filters
in CPSW driver.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-10 22:10:13 -04:00
Fabio Estevam
41e8e40458 net: fec: Add a fec_enet_clear_ethtool_stats() stub for CONFIG_M5272
Commit 2b30842b23 ("net: fec: Clear and enable MIB counters on imx51")
introduced fec_enet_clear_ethtool_stats(), but missed to add a stub
for the CONFIG_M5272=y case, causing build failure for the
m5272c3_defconfig.

Add the missing empty stub to fix the build failure.

Fixes: Commit 2b30842b23 ("net: fec: Clear and enable MIB counters on imx51")
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-10 16:45:22 -04:00
Nicolas Dichtel
cd99c37763 bonding: warn user when 802.3ad speed is unknown
Goal is to advertise the user when ethtool speeds and 802.3ad speeds are
desynchronized.
When this case happens, the kernel needs to be patched.

Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-10 16:06:49 -04:00
Ganesh Goudar
d041784915 cxgb4: fix memory leak in init_one()
Free up mbox_log allocated for PF0 to PF3.

Fixes: 7829451c69 ("cxgb4: Add control net_device for configuring PCIe VF")
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 15:52:50 -04:00
Arnd Bergmann
2f3ca449a4 qed: add qed_int_sb_init() stub function
When CONFIG_QED_SRIOV is disabled, we get a build error:

drivers/net/ethernet/qlogic/qed/qed_int.c: In function 'qed_int_sb_init':
drivers/net/ethernet/qlogic/qed/qed_int.c:1499:4: error: implicit declaration of function 'qed_vf_set_sb_info'; did you mean 'qed_mcp_get_resc_info'? [-Werror=implicit-function-declaration]

All the other declarations have a 'static inline' stub as an alternative
here, so this adds one more for qed_int_sb_init.

Fixes: 50a207147f ("qed: Hold a single array for SBs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 15:51:45 -04:00
Mintz, Yuval
fef1c3f7ac qed: collect GSI port statistics
The LL2 statistics already have place holders for these, but haven't
populated them so far.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 15:49:03 -04:00
Mintz, Yuval
54f19f07ac qed: Call rx_release_cb() when flushing LL2
Driver to inform the connection owner that the its buffers are being
released as part of a flush.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 15:49:02 -04:00
Mintz, Yuval
d2201a2159 qed: No need for LL2 frags indication
This is a legacy leftover; There's no current flow where 'frags_mapped'
would be set.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 15:49:02 -04:00
Michal Kalderon
0518c12f1f qed*: LL2 callback operations
LL2 today is interrupt driven - when tx/rx completion arrives [or any
other indication], qed needs to operate on the connection and pass
the information to the protocol-driver [or internal qed consumer].
Since we have several flavors of ll2 employeed by the driver,
each handler needs to do an if-else to determine the right functionality
to use based on the connection type.

In order to make things more scalable [given that we're going to add
additional types of ll2 flavors] move the infrastrucutre into using
a callback-based approach - the callbacks would be provided as part
of the connection's initialization parameters.

Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 15:49:02 -04:00
Mintz, Yuval
58de289807 qed: LL2 code relocations
Instead of having the OOO logic packetd, divide it with rest of code
according to establish/release flows.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 15:49:01 -04:00
Mintz, Yuval
13c5477172 qed: Cleaner seperation of LL2 inputs
A LL2 connection [qed_ll2_info] has a sub-structure of type qed_ll2_conn
that contain various inputs for ll2 acquisition, but the connection also
utilizes a couple of other inputs.

Restructure the input structure to include all the inputs and refactor
the code necessary to populate those.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 15:49:01 -04:00
Mintz, Yuval
68be910cd2 qed: Revise ll2 Rx completion
This introduces qed_ll2_comp_rx_data as a public struct
and moves handling of Rx packets in LL2 into using it.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 15:49:00 -04:00
Mintz, Yuval
7c7973b2ae qed: LL2 to use packed information for tx
First step in revising the LL2 interface, this declares
qed_ll2_tx_pkt_info as part of the ll2 interface, and uses it for
transmission instead of receiving lots of parameters.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 15:49:00 -04:00
hayeswang
a3307f9b1b r8152: replace napi_complete with napi_complete_done
Change from using napi_complete to napi_complete_done to allow for the
use of gro_flush_timeout in tuning network processing.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 15:37:02 -04:00
hayeswang
745444583a r8152: avoid rx queue more than 1000 packets
Stop queuing rx packets if it is more than 1000.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 15:37:02 -04:00
hayeswang
4214cc550b r8152: check if disabling ALDPS is finished
Use PLA 0xe000 bit 8 to check if disabling ALDPS is finished.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 15:37:01 -04:00
hayeswang
befb2de181 r8152: move the initialization to reset_resume function
Move tp->rtl_ops.init() from rtl8152_resume() to rtl8152_reset_resume().
The initialization is only necessary for reset_resume().

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 15:37:01 -04:00
hayeswang
49d10347d4 r8152: move the default coalesce setting for RTL8153
Only RTL8153 could set coalesce, so move the default setting for
rtl8152_probe() to r8153_init().

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 15:37:01 -04:00
hayeswang
3cb3234eed r8152: adjust U2P3 for RTL8153
Use another way to keep disabling the U2P3 for both RTL_VER_03 and
RTL_VER_04.

Move enabling U2P3 from r8153_init() to r8153_hw_phy_cfg(). The
engineer ask the setting should be done after PHY settings.

Disable U2P3 first in rtl8153_up().

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 15:37:01 -04:00
hayeswang
02552754a7 r8152: adjust rtl8153_runtime_enable function
Adjust the order of rtl8153_runtime_enable() according to the
suggestion from the engineer.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 15:37:00 -04:00
hayeswang
e31f636721 r8152: move the setting of rx aggregation
Move the setting from r8153_first_init() to r8153_init(). It only needs to
be set once.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 15:37:00 -04:00
hayeswang
134f98bcf1 r8152: adjust the settings about MAC clock speed down for RTL8153
The MAC clock speed down could be enabled if the U1/U2 is disabled.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 15:37:00 -04:00
hayeswang
ee4761c16c r8152: adjust lpm settings for RTL8153
Enable lpm after r8153_init() and remove other enable/disable lpm.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 15:36:59 -04:00
hayeswang
c564b871d5 r8152: add r8153_phy_status function
Use r8153_phy_status() to check phy status of RTL8153.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 15:36:59 -04:00
Rahul Lakkireddy
d86cc04e22 cxgb4: handle interrupt raised when FW crashes
Handle TIMER0INT when FW crashes. Check for PCIE_FW[FW_EVAL]
and if it says "Device FW Crashed", then treat it as fatal.
Else, non-fatal.

Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 13:12:23 -04:00
Jakub Kicinski
76abc0f620 nfp: report application FW build name in ethtool -i
Make sure application FW build name is NULL-terminated and
print it as a part of ethtool's firmware version string.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 12:52:09 -04:00
Jakub Kicinski
0be40e66e7 nfp: keep MIP object around
Microcode Information Page contains some useful information, like
application firmware build name.  Keep it around, similar to RTSym
and HWInfo.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 12:52:08 -04:00
Jakub Kicinski
9baa48859b nfp: remove automatic caching of HWInfo
Make callers take care of managing life time of HWInfo.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 12:52:08 -04:00
Jakub Kicinski
af4fa7eac7 nfp: remove automatic caching of RTsym table
The fact that RTsym table is cached inside nfp_cpp handle is
a relic of old times when nfpcore was a library module.  All
the nfp_cpp "caches" are awkward to deal with because of
concurrency and prone to keeping stale information.  Make
the run time symbol table be an object read out from the device
and managed by whoever requested it.  Since the driver loads
FW at ->probe() and never reloads, we can hold onto the table
for ever.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 12:52:08 -04:00
Jakub Kicinski
ab832b8de4 nfp: make sure to cancel port refresh on the error path
If very last stages of netdev registering and init fail some
other netdevs and devlink ports may have been visible to user
space before we torn them back down.  In this case there is a
slight chance user may have triggered port refresh.  We need
to make sure the async work is cancelled.

We have to cancel after releasing pf->lock, so we will always
try to cancel, regardless of which part of probe has failed.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 12:52:07 -04:00
Derek Chickles
7fa136531e liquidio: disallow enabling firmware debug from a VF
Disallow enabling firmware debug from a VF.  Only PF is allowed to do that.

Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 12:50:55 -04:00
Girish Moodalbail
fe741e2362 geneve: add missing rx stats accounting
There are few places on the receive path where packet drops and packet
errors were not accounted for. This patch fixes that issue.

Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 12:49:57 -04:00
Krister Johansen
3ad7d2468f Ipvlan should return an error when an address is already in use.
The ipvlan code already knows how to detect when a duplicate address is
about to be assigned to an ipvlan device.  However, that failure is not
propogated outward and leads to a silent failure.

Introduce a validation step at ip address creation time and allow device
drivers to register to validate the incoming ip addresses.  The ipvlan
code is the first consumer.  If it detects an address in use, we can
return an error to the user before beginning to commit the new ifa in
the networking code.

This can be especially useful if it is necessary to provision many
ipvlans in containers.  The provisioning software (or operator) can use
this to detect situations where an ip address is unexpectedly in use.

Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 12:26:07 -04:00
stephen hemminger
592b4fe895 netvsc: fold in get_outbound_net_device
No longer need common code to find get_outbound_net_device.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 12:15:05 -04:00
stephen hemminger
9579083732 netvsc: pass net_device to netvsc_init_buf and netvsc_connect_vsp
Don't need to find netvsc_device structure, caller already had it.
Also rearrange declarations.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 12:15:05 -04:00
stephen hemminger
2d694d2abe netvsc: mark error cases as unlikely
Mark if() statements used for error handling only as unlikely()

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 12:15:03 -04:00
stephen hemminger
2d05b56097 netvsc: use typed pointer for internal state
The element netvsc_device:extension is always a pointer to RNDIS
information.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 12:15:02 -04:00
stephen hemminger
4097596278 netvsc: use hv_get_bytes_to_read
Don't need need to look at write space in netvsc_close.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 12:15:02 -04:00
stephen hemminger
60b86665af netvsc: optimize calculation of number of slots
Speed up transmit check for fragmented packets by using existing
macros to compute number of pages, and eliminate loop since
skb fragments each take a page. Number of slots is also unsigned.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 12:15:02 -04:00
Vivien Didelot
bec90b6d96 net: dsa: mv88e6xxx: prefix PHY macros
Prefix the PHY_* macros with a Marvell specific MV88E6XXX_ prefix.
There is no functional changes.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 12:11:00 -04:00
Vivien Didelot
cd782656da net: dsa: mv88e6xxx: rework jumbo size operation
Marvell chips have a Jumbo Mode to set the maximum frame size (MTU).

The mv88e6xxx_ops structure is meant to contain generic functionalities,
no driver logic. Change port_jumbo_config to port_set_jumbo_size setting
the mode from a given maximum size value.

There is no functional changes since we still use 10240 bytes.

At the same time, correctly clear all Jumbo Mode bits before writing.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 12:10:59 -04:00
Vivien Didelot
0898432cc2 net: dsa: mv88e6xxx: rework pause limit operation
All Marvell chips supporting Pause frames limiting use 1-byte value for
input and output.

Old chips have both bytes adjacent in a 16-bit register. New ones have
an indirect table using 8-bit data.

The mv88e6xxx library functions (such as in port.c) must not contain
driver logic, but only generic helpers. This patch changes the
port_pause_config operation for port_pause_limit taking two u8 arguments
for input and output limits. There is no functional changes.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 12:10:59 -04:00
Vivien Didelot
fa8d117960 net: dsa: mv88e6xxx: do not prefix ops with g1
The mv88e6xxx_ops describe functionalities, regardless their locations
(which can be Global1, Global2, or whatever register set.)

Rename the g1_set_cpu_port and g1_set_egress_port ops to set_cpu_port
and set_egress_port. No functional changes.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 12:10:58 -04:00
Vivien Didelot
f894c29c35 net: dsa: mv88e6xxx: use bridge state values
Reuse the BR_STATE_* values to abstract a port STP state value.

This provides shorter names and better control over the DSA switch
operation call.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 12:10:58 -04:00