When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1]
Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [1]
Reported-by: Gui-Dong Han <hanguidong02@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220789
Fixes: 3d713e0e38 ("driver core: platform: add device binding path 'driver_override'")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260303115720.48783-5-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
imx_clk_scu_init() registers the imx_clk_scu_driver while commonly being
called from IMX driver's probe() callbacks.
However, it neither makes sense to register drivers from probe()
callbacks of other drivers, nor does the driver core allow registering
drivers with a device lock already being held.
The latter was revealed by commit dc23806a7c ("driver core: enforce
device_lock for driver_match_device()") leading to a deadlock condition
described in [1].
Besides that, nothing seems to unregister the imx_clk_scu_driver once
the corresponding driver module is unloaded, which leaves the
driver-core with a dangling pointer.
Also, if there are multiple matching devices for the imx8qxp_clk_driver,
imx8qxp_clk_probe() calls imx_clk_scu_init() multiple times. However,
any subsequent call after the first one will fail, since the driver-core
does not allow to register the same struct platform_driver multiple
times.
Hence, register the imx_clk_scu_driver from module_init() and unregister
it in module_exit().
Note that we first register the imx8qxp_clk_driver and then call
imx_clk_scu_module_init() to avoid having to call
imx_clk_scu_module_exit() in the unwind path of imx8qxp_clk_init().
Fixes: dc23806a7c ("driver core: enforce device_lock for driver_match_device()")
Fixes: 220175cd39 ("clk: imx: scu: fix build break when compiled as modules")
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Closes: https://lore.kernel.org/lkml/13955113.uLZWGnKmhe@steina-w/
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # TQMa8x/MBa8x
Link: https://lore.kernel.org/lkml/DFU7CEPUSG9A.1KKGVW4HIPMSH@kernel.org/ [1]
Acked-by: Abel Vesa <abelvesa@kernel.org>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20260212235842.85934-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
moved the context saving APIs around to fix a build error in certain
configurations. There was a change to the core framework for
CLK_OPS_PARENT_ENABLE behavior during registration, but it wrecked existing
drivers that didn't expect things to be turned off during clk registration so
it got reverted.
This cycle is really a large collection of new clk drivers, primarily for
Qualcomm SoCs but also for Amlogic, SpacemiT, Google, and Aspeed. Another big
change in here is support for automatic hardware clock gating on Samsung SoCs
where the clks turn on and off when needed. Ideally more vendors move to this
method for better power savings. The highlights are in the updates section
below.
Beyond all the new drivers we have a bunch of cleanups like converting drivers
from divider_round_rate() to divider_determine_rate() and using scoped for each
OF child loops. Otherwise it's the usual data fixes and plugging reference
leaks, etc. that's all pretty ordinary but not critical enough to fix until the
next release.
New Drivers:
- Qualcomm Kaanapali global, tcsr, rpmh, display, gpu, camera, and video clk
controllers
- Qualcomm SM8750 camera clk controllers
- Qualcomm MSM8940 and SDM439 global clk controllers
- Google GS101 Display Process Unit (DPU) clk controllers
- SpacemiT K3 clk controllers
- Amlogic t7 clk controllers
- Aspeed AST2700 clk controllers
Updates:
- Convert clock dividers from round_rate() to determine_rate()
- Fix sparse warnings, kernel-doc warnings, and plug leaked OF refs
- Automatic hardware clk gating on Google GS101 SoCs
- Amlogic s4 video clks
- CAN-FD clks and resets on Renesas RZ/T2H, RZ/N2H, RZ/V2H, and RZ/V2N
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on Renesas
RZ/T21H and RZ/N2H
- DMAC, interrupt controller (ICU), SPI, and thermal (TSU) clocks and resets
on Renesas RZ/V2N
- More serial (RSCI) clocks and resets on Renesas RZ/V2H and RZ/V2N
- CPU frequency scaling on T-HEAD TH1520
-----BEGIN PGP SIGNATURE-----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=Zx/F
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Not much changed in the clk framework this time except the clk.h
consumer API moved the context saving APIs around to fix a build error
in certain configurations.
There was a change to the core framework for CLK_OPS_PARENT_ENABLE
behavior during registration, but it wrecked existing drivers that
didn't expect things to be turned off during clk registration so it
got reverted.
This cycle is really a large collection of new clk drivers, primarily
for Qualcomm SoCs but also for Amlogic, SpacemiT, Google, and Aspeed.
Another big change in here is support for automatic hardware clock
gating on Samsung SoCs where the clks turn on and off when needed.
Ideally more vendors move to this method for better power savings. The
highlights are in the updates section below.
Beyond all the new drivers we have a bunch of cleanups like converting
drivers from divider_round_rate() to divider_determine_rate() and
using scoped for each OF child loops. Otherwise it's the usual data
fixes and plugging reference leaks, etc. that's all pretty ordinary
but not critical enough to fix until the next release.
New Drivers:
- Qualcomm Kaanapali global, tcsr, rpmh, display, gpu, camera, and
video clk controllers
- Qualcomm SM8750 camera clk controllers
- Qualcomm MSM8940 and SDM439 global clk controllers
- Google GS101 Display Process Unit (DPU) clk controllers
- SpacemiT K3 clk controllers
- Amlogic t7 clk controllers
- Aspeed AST2700 clk controllers
Updates:
- Convert clock dividers from round_rate() to determine_rate()
- Fix sparse warnings, kernel-doc warnings, and plug leaked OF refs
- Automatic hardware clk gating on Google GS101 SoCs
- Amlogic s4 video clks
- CAN-FD clks and resets on Renesas RZ/T2H, RZ/N2H, RZ/V2H, and
RZ/V2N
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/T21H and RZ/N2H
- DMAC, interrupt controller (ICU), SPI, and thermal (TSU) clocks and
resets on Renesas RZ/V2N
- More serial (RSCI) clocks and resets on Renesas RZ/V2H and RZ/V2N
- CPU frequency scaling on T-HEAD TH1520"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (165 commits)
clk: aspeed: Add reset for HACE/VIDEO
dt-bindings: clock: aspeed: Add VIDEO reset definition
clk: aspeed: add AST2700 clock driver
MAINTAINERS: Add entry for ASPEED clock drivers.
clk: aspeed: Move the existing ASPEED clk drivers into aspeed subdirectory.
Revert "clk: Respect CLK_OPS_PARENT_ENABLE during recalc"
clk: Disable KUNIT_UML_PCI
dt-bindings: clk: rs9: Fix DIF pattern match
clk: rs9: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
clk: rs9: Reserve 8 struct clk_hw slots for for 9FGV0841
clk: qcom: sm8750: Constify 'qcom_cc_desc' in SM8750 camcc
clk: zynqmp: pll: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: zynqmp: divider: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: mediatek: Fix error handling in runtime PM setup
clk: mediatek: don't select clk-mt8192 for all ARM64 builds
clk: mediatek: Add mfg_eb as parent to mt8196 mfgpll clocks
clk: mediatek: Refactor pllfh registration to pass device
clk: mediatek: Pass device to clk_hw_register for PLLs
clk: mediatek: Refactor pll registration to pass device
clk: Respect CLK_OPS_PARENT_ENABLE during recalc
...
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Abel Vesa <abelvesa@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260109-of-for-each-compatible-scoped-v3-9-c22fa2c0749a@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Abel Vesa <abelvesa@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260109-of-for-each-compatible-scoped-v3-8-c22fa2c0749a@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Some parallel panels have a pixelclk of 24.19 MHz. Add support for
241.90 MHz so a by 10 divider can be used to derive the exact pixelclk.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20260113-v6-18-topic-clk-fracn-gppll-v3-2-45da70f43c98@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Some parallel panels have a pixelclk of 33.260 MHz. Add support for
332.60 MHz so a by 10 divider can be used to derive the exact pixelclk.
Reviewed-by: Primoz Fiser <primoz.fiser@norik.com>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20260113-v6-18-topic-clk-fracn-gppll-v3-1-45da70f43c98@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
the core clk framework. The majority diff wise is for the new Rockchip and
Qualcomm clk drivers which is mostly lines and lines of data structures to
describe the clk hardware in these SoCs. Beyond those two, Renesas continues to
incrementally add clks to their SoC drivers, causing them to show up higher in
the diffstat this time because they added quite a few clks all over the place.
Overall it is a semi-quiet release that has some new clk drivers and the usual
fixes for clock data that was wrong or missing and non-critical cleanups that
plug error paths or fix typos.
New Drivers:
- Qualcomm IPQ5424 Network Subsystem Clock Controller
- Qualcomm SM8750 Video Clock Controller
- Rockchip RV1126B and RK3506 clock drivers
- i.MX8ULP SIM LPAV clock driver
- Samsung ACPM (firmware interface) clock driver
- Altera Agilex5 clock driver
-----BEGIN PGP SIGNATURE-----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=Ivih
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This is entirely SoC clk drivers.
The majority diff wise is for the new Rockchip and Qualcomm clk
drivers which is mostly lines and lines of data structures to describe
the clk hardware in these SoCs. Beyond those two, Renesas continues to
incrementally add clks to their SoC drivers, causing them to show up
higher in the diffstat this time because they added quite a few clks
all over the place.
Overall it is a semi-quiet release that has some new clk drivers and
the usual fixes for clock data that was wrong or missing and
non-critical cleanups that plug error paths or fix typos.
New Drivers:
- Qualcomm IPQ5424 Network Subsystem Clock Controller
- Qualcomm SM8750 Video Clock Controller
- Rockchip RV1126B and RK3506 clock drivers
- i.MX8ULP SIM LPAV clock driver
- Samsung ACPM (firmware interface) clock driver
- Altera Agilex5 clock driver"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (117 commits)
clk: keystone: fix compile testing
clk: keystone: syscon-clk: fix regmap leak on probe failure
clk: qcom: Mark camcc_sm7150_hws static
clk: samsung: exynos-clkout: Assign .num before accessing .hws
clk: rockchip: Add clock and reset driver for RK3506
dt-bindings: clock: rockchip: Add RK3506 clock and reset unit
clk: actions: Fix discarding const qualifier by 'container_of' macro
clk: spacemit: Set clk_hw_onecell_data::num before using flex array
clk: visconti: Add VIIF clocks
dt-bindings: clock: tmpv770x: Add VIIF clocks
dt-bindings: clock: tmpv770x: Remove definition of number of clocks
clk: visconti: Do not define number of clocks in bindings
clk: rockchip: Add clock controller for the RV1126B
dt-bindings: clock, reset: Add support for rv1126b
clk: rockchip: Implement rockchip_clk_register_armclk_multi_pll()
clk: qcom: x1e80100-dispcc: Add USB4 router link resets
dt-bindings: clock: qcom: x1e80100-dispcc: Add USB4 router link resets
clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750
dt-bindings: clock: qcom: Add SM8750 video clock controller
clk: qcom: branch: Extend invert logic for branch2 mem clocks
...
Several drivers can benefit from registering per-instance data along
with the syscore operations. To achieve this, move the modifiable fields
out of the syscore_ops structure and into a separate struct syscore that
can be registered with the framework. Add a void * driver data field for
drivers to store contextual data that will be passed to the syscore ops.
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The i.MX8ULP System Integration Module (SIM) LPAV module is a block
control module found inside the LPAV subsystem, which offers some clock
gating options and reset line assertion/de-assertion capabilities.
Therefore, the clock gate management is supported by registering the
module's driver as a clock provider, while the reset capabilities are
managed via the auxiliary device API to allow the DT node to act as a
reset and clock provider.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251104120301.913-4-laurentiumihalcea111@gmail.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Use helper function devm_auxiliary_device_create() to remove some
boilerplate code.
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20251024-auxiliary-v2-1-a353dc9e6b1a@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Some of the PCCs on i.MX8ULP have a sw_rst bit to control the peripheral
reset through SW method. For peripherals like GPU that need sync reset,
some delay is necessary befere & after release the reset to make sure the
HW is reset into a known status. So add some delay before & after release
reset.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250801072153.1974428-1-ping.bai@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
When runtime PM is used for clock providers that are part of a power
domain, the power domain supply is cut off during runtime suspend. This
causes all BLK CTL registers belonging to that power domain to reset. To
prevent this, save the state of the registers before entering suspend
and restore them on resume. Additionally, disable the APB clock during
suspend to minimize power consumption.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250804131450.3918846-3-laurentiu.palcu@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Add a platform data (pdata) member to struct imx95_blk_ctl to store the
result of of_device_get_match_data() during probe to avoid redundant
calls in suspend and resume functions.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250804131450.3918846-2-laurentiu.palcu@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
* clk-pm:
clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls
clk: imx: Remove redundant pm_runtime_mark_last_busy() calls
Documentation: PM: *_autosuspend() functions update last busy time
PM: runtime: Mark last busy stamp in pm_request_autosuspend()
PM: runtime: Mark last busy stamp in pm_runtime_autosuspend()
PM: runtime: Mark last busy stamp in pm_runtime_put_sync_autosuspend()
PM: runtime: Mark last busy stamp in pm_runtime_put_autosuspend()
PM: runtime: Document return values of suspend-related API functions
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
This driver also implements both the determine_rate() and round_rate()
clk ops, and the round_rate() clk ops is deprecated. When both are
defined, clk_core_determine_round_nolock() from the clk core will only
use the determine_rate() clk ops, so let's remove the round_rate() clk
ops since it's unused.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-clk-imx-round-rate-v1-13-5726f98e6d8d@redhat.com
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-clk-imx-round-rate-v1-12-5726f98e6d8d@redhat.com
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-clk-imx-round-rate-v1-11-5726f98e6d8d@redhat.com
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-clk-imx-round-rate-v1-10-5726f98e6d8d@redhat.com
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-clk-imx-round-rate-v1-9-5726f98e6d8d@redhat.com
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-clk-imx-round-rate-v1-8-5726f98e6d8d@redhat.com
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-clk-imx-round-rate-v1-7-5726f98e6d8d@redhat.com
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-clk-imx-round-rate-v1-6-5726f98e6d8d@redhat.com
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
The change to call fixup_div->ops->determine_rate() instead of
fixup_div->ops->round_rate() was done by hand.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-clk-imx-round-rate-v1-5-5726f98e6d8d@redhat.com
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-clk-imx-round-rate-v1-4-5726f98e6d8d@redhat.com
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
The change to call busy->div_ops->determine_rate() instead of
busy->div_ops->round_rate() was done by hand.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-clk-imx-round-rate-v1-3-5726f98e6d8d@redhat.com
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This driver implements both the determine_rate() and round_rate() clk
ops, and the round_rate() clk ops is deprecated. When both are defined,
clk_core_determine_round_nolock() from the clk core will only use the
determine_rate() clk ops, so let's remove the round_rate() clk ops since
it's unused.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-clk-imx-round-rate-v1-2-5726f98e6d8d@redhat.com
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This driver implements both the determine_rate() and round_rate() clk
ops, and the round_rate() clk ops is deprecated. When both are defined,
clk_core_determine_round_nolock() from the clk core will only use the
determine_rate() clk ops, so let's remove the round_rate() clk ops since
it's unused.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-clk-imx-round-rate-v1-1-5726f98e6d8d@redhat.com
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250704075400.3217126-1-sakari.ailus@linux.intel.com
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
i.MX94 BLK CTL LVDS CSR's LVDS_PHY_CLOCK_CONTRL register controls the clock
gating logic of LVDS units. Display CSR's DISPLAY_ENGINES_CLOCK_CONTROL
register controls the selection of the clock feeding the display engine.
Add clock gate support for the two CSRs.
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250707-imx95-blk-ctl-7-1-v3-4-c1b676ec13be@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Rename i.MX95 lvds and displaymix csr blk drvdata in order to add
support for i.MX943.
Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250707-imx95-blk-ctl-7-1-v3-3-c1b676ec13be@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
When enabling runtime PM for clock suppliers that also belong to a power
domain, the following crash is thrown:
error: synchronous external abort: 0000000096000010 [#1] PREEMPT SMP
Workqueue: events_unbound deferred_probe_work_func
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : clk_mux_get_parent+0x60/0x90
lr : clk_core_reparent_orphans_nolock+0x58/0xd8
Call trace:
clk_mux_get_parent+0x60/0x90
clk_core_reparent_orphans_nolock+0x58/0xd8
of_clk_add_hw_provider.part.0+0x90/0x100
of_clk_add_hw_provider+0x1c/0x38
imx95_bc_probe+0x2e0/0x3f0
platform_probe+0x70/0xd8
Enabling runtime PM without explicitly resuming the device caused
the power domain cut off after clk_register() is called. As a result,
a crash happens when the clock hardware provider is added and attempts
to access the BLK_CTL register.
Fix this by using devm_pm_runtime_enable() instead of pm_runtime_enable()
and getting rid of the pm_runtime_disable() in the cleanup path.
Fixes: 5224b18946 ("clk: imx: add i.MX95 BLK CTL clk driver")
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250707-imx95-blk-ctl-7-1-v3-2-c1b676ec13be@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
The IMX8MPCEC datasheet lists maximum frequencies allowed for different
modules. Some of these limits are universal, but some depend on
whether the SoC is operating in nominal or in overdrive mode.
The imx8mp.dtsi currently assumes overdrive mode and configures some
clocks in accordance with this. Boards wishing to make use of nominal
mode will need to override some of the clock rates manually.
As operating the clocks outside of their allowed range can lead to
difficult to debug issues, it makes sense to register the maximum rates
allowed in the driver, so the CCF can take them into account.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/20250218-imx8m-clk-v4-6-b7697dc2dcd0@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
The DSP and OCRAM_A modules from AUDIOMIX are clocked by
AUDIO_AXI_CLK_ROOT, not AUDIO_AHB_CLK_ROOT. Update the clock data
accordingly.
Fixes: 6cd95f7b15 ("clk: imx: imx8mp: Add audiomix block control")
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250226164513.33822-3-laurentiumihalcea111@gmail.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
* clk-fixes:
clk: clk-loongson2: Fix the number count of clk provider
clk: mmp2: call pm_genpd_init() only after genpd.name is set
clk: sunxi-ng: a100: enable MMC clock reparenting
clk: clk-imx8mp-audiomix: fix function signature
clk: thead: Fix TH1520 emmc and shdci clock rate
Enable the LVDS gate, MIPI DSI, PXP, FLEXIO and MU only for i.MX93,
because i.MX91 does not support them.
Update enet clk entry format to align with others.
Fixes: a27bfff88d ("clk: imx: add i.MX91 clk")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241225001443.883131-1-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Split IMX93_CLK_SPDIF_IPG from IMX93_CLK_SPDIF_GATE
because the IMX93_CLK_SPDIF_GATE controls the gate
of IPG clock and root clock. Without this change,
disabling IMX93_CLK_SPDIF_GATE would also disable
the IPG clock, causing register access failures.
Fixes: 1c4a4f7362 ("arm64: dts: imx93: Add audio device nodes")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241119015805.3840606-3-shengjiu.wang@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
The PLL1416x is used to implement SYS_PLL3 on i.MX8MP and can be used
to drive CLKOUTn clock. Add 208 MHz and 416 MHz entries to the PLL so
they can be generated by the PLL and used to produce e.g. 13 MHz or
26 MHz on CLKOUTn output.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20241112013805.333798-1-marex@denx.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
The CLKOUTn may be fed from PLL1/2/3, but the PLL1/2/3 has to be enabled
first by setting PLL_CLKE bit 11 in CCM_ANALOG_SYS_PLLn_GEN_CTRL register.
The CCM_ANALOG_SYS_PLLn_GEN_CTRL bit 11 is modeled by plln_out clock. Fix
the clock tree and place the clkout1/2 under plln_sel instead of plain plln
to let the clock subsystem correctly control the bit 11 and enable the PLL
in case the CLKOUTn is supplied by PLL1/2/3.
Fixes: 43896f56b5 ("clk: imx8mp: add clkout1/2 support")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20241112013718.333771-1-marex@denx.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
clk_imx8mp_audiomix_reset_controller_register() in the
"if !CONFIG_RESET_CONTROLLER" branch had the first
argument missing. It is an empty function for this branch
so it wasn't immediately apparent.
Fixes: 6f0e817175 ("clk: imx: clk-audiomix: Add reset controller")
Cc: <stable@vger.kernel.org> # 6.12.x
Signed-off-by: Nikolaus Voss <nv@vosn.de>
Link: https://lore.kernel.org/r/20241219105447.889CB11FE@mail.steuer-voss.de
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
If device_link_add() fails, it returns NULL pointer not ERR_PTR(),
replace IS_ERR() with NULL pointer check, and return -EINVAL.
Fixes: d3a0946d7a ("clk: imx: imx8: add audio clock mux driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241026112452.1523-1-yangyingliang@huaweicloud.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
On i.MX8QM, HDMI LPCG clocks operation needs SCU clock "hdmi_ipg_clk"
to be ON. While during noirq suspend phase, "hdmi_ipg_clk" is disabled
by HDMI IRQ STEER driver, so SError will be triggered when accessing
the HDMI LPCG registers.
Skip all HDMI LPCG clocks save/restore to avoid SError during
system suspend/resume, it will NOT introduce additional power consumption
as their parent clock is disabled when suspend.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20241027-imx-clk-v1-v3-5-89152574d1d7@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
The scu clk_ops only inplements prepare() and unprepare() callback.
Saving the clock state during suspend by checking clk_hw_is_enabled()
is not safe as it's possible that some device drivers may only
disable the clocks without unprepare. Then the state retention will not
work for such clocks.
Fixing it by checking clk_hw_is_prepared() which is more reasonable
and safe.
Fixes: d0409631f4 ("clk: imx: scu: add suspend/resume support")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/20241027-imx-clk-v1-v3-4-89152574d1d7@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
