ip6mr does not have rtnetlink interface for MFC unlike ipmr,
which uses dev_get_by_index_rcu() to set struct mfcctl.mfcc_parent.
ip6mr_mfc_add() and ip6mr_mfc_delete() are called under RTNL
from ip6_mroute_setsockopt() only.
There are no RTNL dependant, but ip6_mroute_setsockopt() reuses
RTNL just for mrt->mfc_hash and mrt->mfc_cache_list.
Let's replace RTNL with a new per-netns mutex.
Later, ip6mr_notifier_ops and ipmr_seq will be moved under
CONFIG_IPV6_MROUTE.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260604224712.3209821-15-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When ip6mr_free_table() is called from ip6mr_rules_init() or
ip6mr_net_init(), the netns is not yet published.
Thus, no device should have been registered, and
mroute_clean_tables() will not call mif6_delete(), so
unregister_netdevice_many() is unnecessary.
unregister_netdevice_many() does nothing if the list is empty,
but it requires RTNL due to the unconditional ASSERT_RTNL()
at the entry of unregister_netdevice_many_notify().
Let's remove unnecessary RTNL and ASSERT_RTNL() and instead
add WARN_ON_ONCE() in ip6mr_free_table().
Note that we use a local list for the new WARN_ON_ONCE() because
dev_kill_list passed from ip6mr_rules_exit_rtnl() may have some
devices when other ops->init() fails after ipmr durnig setup_net().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260604224712.3209821-14-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6mr_net_ops uses ->exit_batch() to acquire RTNL only once
for dying network namespaces.
ip6mr does not depend on the ordering of ->exit_rtnl() and
->exit_batch() of other pernet_operations (unlike fib_net_ops).
Once ip6mr_free_table() is called and all devices are
queued for destruction in ->exit_rtnl(), later during
NETDEV_UNREGISTER, ip6mr_device_event() will not see anything
in vif table and just do nothing.
Let's convert ip6mr_net_exit_batch() to ->exit_rtnl().
We will remove RTNL and unregister_netdevice_many() in
ip6mr_rules_init().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260604224712.3209821-13-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a prep commit to convert ip6mr_net_exit_batch() to
->exit_rtnl().
Let's move unregister_netdevice_many() in ip6mr_free_table()
to its callers.
Now ip6mr_rules_exit() can do batching all tables per netns.
Note that later we will remove RTNL and unregister_netdevice_many()
in ip6mr_rules_init().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260604224712.3209821-12-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a prep commit to convert ip6mr_net_exit_batch() to
->exit_rtnl().
Let's move unregister_netdevice_many() in mroute_clean_tables()
to its callers.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260604224712.3209821-11-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fib_rules_unregister() removes ops from net->rules_ops under
spinlock, calls ops->delete() for each rule, and frees the ops.
ip6mr_rules_ops_template does not have ->delete(), and any
operation does not require RTNL there.
Let's move fib_rules_unregister() from ip6mr_rules_exit() to
ip6mr_net_exit().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260604224712.3209821-10-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since default_device_exit_batch() is called after ->exit_rtnl(),
idev->mc_ifc_work could finally call mroute6_is_socket() under RCU
while ->exit_rtnl() is running. [0]
With CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=n, ip6mr_fib_lookup() does
not check if net->ipv6.mrt6 is NULL. If ip6mr_net_exit_batch()
set net->ipv6.mrt6 to NULL and freed it, the mrt->mroute_sk access
could result in null-ptr-deref or use-after-free.
Let's prepare for that situation by applying RCU rule to ip6mr
table similarly.
!check_net(net) is added in ip6mr_cache_unresolved() and
mroute_clean_tables() to synchronise the two by mfc_unres_lock
so that ip6mr_cache_unresolved() will not queue skb after
mroute_clean_tables() purged &mrt->mfc_unres_queue.
rcu_read_lock() in reg_vif_xmit() is moved up to cover
ip6mr_fib_lookup() as with ipmr.
Link: https://lore.kernel.org/netdev/20260407184202.34cfe2d6@kernel.org/ #[0]
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260604224712.3209821-9-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 22e36ea9f5 ("inet: allow ip_valid_fib_dump_req() to
be called with RTNL or RCU") introduced the rtnl_held field in
struct fib_dump_filter to switch __dev_get_by_index() and
dev_get_by_index_rcu() depending on the caller's context.
This field served as an interim measure while we were incrementally
converting all callers of ip_valid_fib_dump_req() to RCU.
Now that all users (IPv4, IPv6, ipmr, ip6mr, and MPLS) have
been converted to RCU, the field is no longer necessary.
Let's remove it.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260604224712.3209821-8-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6mr_rtm_dumproute() calls mr_table_dump() or mr_rtm_dumproute(),
and mr_rtm_dumproute() finally calls mr_table_dump().
mr_table_dump() calls the passed function, _ip6mr_fill_mroute().
_ip6mr_fill_mroute() is a wrapper for ip6mr_fill_mroute() to cast
struct mr_mfc * to struct mfc6_cache *.
ip6mr_fill_mroute() can already be called safely under RCU.
Let's convert ip6mr_rtm_dumproute() to RCU.
Now there is no user of the rtnl_held field in struct
fib_dump_filter, and the next patch will remove it.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260604224712.3209821-7-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6mr_rtm_getroute() calls __ip6mr_get_table(), ip6mr_cache_find(),
and ip6mr_fill_mroute().
Once created, struct mr_table is not freed until netns dismantle,
so it's safe under RCU.
ip6mr_cache_find() iterates mrt->mfc_hash with rhl_for_each_entry_rcu().
struct mr_mfc is freed with call_rcu(), so this is also safe under
RCU.
ip6mr_fill_mroute() calls mr_fill_mroute(), which properly uses
RCU helpers.
Let's call them under RCU and register ip6mr_rtm_getroute() with
RTNL_FLAG_DOIT_UNLOCKED.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260604224712.3209821-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will convert ip6mr_rtm_getroute() to RCU in the following patch,
where __ip6mr_get_table() will be called under RCU.
nlmsg_new() uses GFP_KERNEL and needs to be called before holding
rcu_read_lock().
As a prep, let's move nlmsg_new() before __ip6mr_get_table().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260604224712.3209821-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mr6_msgsize() calculates skb size needed for ip6mr_fill_mroute().
The size differs based on mrt->maxvif.
We will drop RTNL for ip6mr_rtm_getroute() and mrt->maxvif may
change under RCU.
To avoid -EMSGSIZE, let's calculate the size with the maximum
value of mrt->maxvif, MAXMIFS.
struct rtnexthop is 8 bytes and MAXMIFS is 32, so the maximum delta
is 256 bytes, which is small enough.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260604224712.3209821-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These fields in struct mr_table are updated in ip6_mroute_setsockopt()
under RTNL:
* mroute_do_pim
* mroute_do_assert (MRT6_PIM is under RTNL while MRT6_ASSERT is lockless)
* mroute_do_wrvifwhole
However, ip6_mroute_getsockopt() does not hold RTNL and read the first
two fields locklessly, and ip6_mr_forward() reads all the three under
RCU.
Let's use WRITE_ONCE() and READ_ONCE() for them.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260604224712.3209821-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These symbols don't need to be exported, they are only used from vmlinux:
- inet6addr_notifier_call_chain
- inet6addr_validator_notifier_call_chain
- in6addr_linklocal_allnodes
- in6addr_linklocal_allrouters
- in6addr_interfacelocal_allnodes
- in6addr_interfacelocal_allrouters
- in6addr_sitelocal_allrouters
- inet6_cleanup_sock
- ip6_sk_dst_lookup_flow
- ipv6_proxy_select_ident
- ip6_sk_update_pmtu
- ip6_sk_redirect
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260604174555.2801532-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub suggests renaming the existing assert to match
the netdev_lock_ops_compat() semantics.
We want netdev_assert_locked_ops() to mean - if the driver
is ops locked - check that it's holding the device lock.
The existing helper check for either ops lock or rtnl_lock,
which is the locking behavior of netdev_lock_ops_compat().
The reason for naming divergence is likely that
netdev_ops_assert_locked() predated the _compat() helpers.
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260603012840.2254293-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When processing an MLD query, a pointer to the multicast group address
is retrieved when initially parsing the packet. This pointer is later
dereferenced without being reloaded despite the fact that the skb header
might have been reallocated following the pskb_may_pull() calls, leading
to a use-after-free [1].
Fix by copying the multicast group address when the packet is initially
parsed.
[1]
BUG: KASAN: slab-use-after-free in __mld_query_work (net/ipv6/mcast.c:1512)
Read of size 8 at addr ffff8881154b8e90 by task kworker/4:1/118
Workqueue: mld mld_query_work
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_address_description.constprop.0 (mm/kasan/report.c:378)
print_report (mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
__mld_query_work (net/ipv6/mcast.c:1512)
mld_query_work (net/ipv6/mcast.c:1563)
process_one_work (kernel/workqueue.c:3314)
worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
</TASK>
[...]
Freed by task 118:
kasan_save_stack (mm/kasan/common.c:57)
kasan_save_track (mm/kasan/common.c:78)
kasan_save_free_info (mm/kasan/generic.c:584)
__kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285)
kfree (./include/linux/kasan.h:235 mm/slub.c:2689 mm/slub.c:6251 mm/slub.c:6566)
pskb_expand_head (net/core/skbuff.c:2335)
__pskb_pull_tail (net/core/skbuff.c:2878 (discriminator 4))
__mld_query_work (net/ipv6/mcast.c:1495 (discriminator 1))
mld_query_work (net/ipv6/mcast.c:1563)
process_one_work (kernel/workqueue.c:3314)
worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Fixes: 97300b5fdf ("[MCAST] IPv6: Check packet size when process Multicast")
Reported-by: Leo Lin <leo@depthfirst.com>
Reviewed-by: David Ahern <dahern@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20260603101811.612594-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In ip6_parse_tlv(), recompute the network header pointer once regardless
of the option processed (Hbh or Dest), as missing recomputation for
specific options has caused issues in the past.
Signed-off-by: Justin Iurman <justin.iurman@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260602213033.12244-1-justin.iurman@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported a splat [1]: a slab-use-after-free in
ipv6_chk_acast_addr(), which walks the global inet6_acaddr_lst[] hash
under RCU and dereferences a struct ifacaddr6 that has already been
freed while still linked in the hash, so a later reader walks into a
dangling node.
In __ipv6_dev_ac_inc() the aca is allocated with refcount 1, then
aca_get() bumps it to 2 to keep it alive across the unlocked region.
It is published to idev->ac_list under idev->lock, but
ipv6_add_acaddr_hash() runs after write_unlock_bh(). A concurrent
teardown (ipv6_ac_destroy_dev() from addrconf_ifdown(), under RTNL)
can slip into that window:
CPU0 __ipv6_dev_ac_inc CPU1 ipv6_ac_destroy_dev (RTNL)
------------------------------ ------------------------------------
aca_alloc() refcnt 1
aca_get() refcnt 2
write_lock_bh(idev->lock)
add aca to ac_list
write_unlock_bh(idev->lock)
write_lock_bh(idev->lock)
pull aca off ac_list
write_unlock_bh(idev->lock)
ipv6_del_acaddr_hash(aca)
hlist_del_init_rcu() is a no-op,
aca is not in the hash yet
aca_put() refcnt 2->1
ipv6_add_acaddr_hash(aca)
aca now inserted into the hash
aca_put() refcnt 1->0
call_rcu(aca_free_rcu) -> kfree(aca)
The hash removal becomes a no-op because the insertion has not
happened yet, so once CPU0 inserts and drops the last reference, the
aca is freed while still linked in inet6_acaddr_lst[], and readers
dereference freed memory after the slab slot is reused.
This window opened once RTNL stopped serializing the join path against
device teardown. Move ipv6_add_acaddr_hash() inside the idev->lock
section so the ac_list and hash insertions are atomic with respect to
teardown: a racing remover now either misses the aca entirely or finds
it in both lists.
acaddr_hash_lock is now nested under idev->lock, which is acquired in
softirq context, so switch all acaddr_hash_lock sites to spin_lock_bh()
to avoid the irq lock inversion reported in [2].
[1] https://syzkaller.appspot.com/bug?extid=a01df04303c131efbf3a
[2] https://lore.kernel.org/netdev/6a194ef7.ba3b1513.1890b4.0000.GAE@google.com/
Reported-by: syzbot+819eb928d120d2bdad0e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6a191f87.ce022c6e.138e56.0003.GAE@google.com/T/
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Fixes: eb1ac9ff6c ("ipv6: anycast: Don't hold RTNL for IPV6_JOIN_ANYCAST.")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260529152219.235475-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This was reported by Sashiko [1].
The RCU walk over rt->fib6_siblings can spin forever if rt is unlinked
mid-iteration: rt->fib6_siblings.next still points into the old ring,
so the loop never meets &rt->fib6_siblings as its terminator.
fib6_purge_rt() always does WRITE_ONCE(rt->fib6_nsiblings, 0) before
list_del_rcu(), so readers can use rt->fib6_nsiblings == 0 as the
detach signal. The same pattern is used in fib6_info_uses_dev() and
rt6_nlmsg_size().
[1]: https://sashiko.dev/#/patchset/20260520023411.391233-1-jiayuan.chen%40linux.dev
Suggested-by: Florian Westphal <fw@strlen.de>
Fixes: 1c32b24c23 ("netfilter: nft_fib_ipv6: switch to fib6_lookup")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Conflicts:
drivers/net/ethernet/microsoft/mana/mana_en.c:
17bfe0a8c0 ("net: mana: Add NULL guards in teardown path to prevent panic on attach failure")
d07efe5a6e ("net: mana: Use per-queue allocation for tx_qp to reduce allocation size")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Chris Adams reported that preserving insertion order for same-scope
addresses is causing SSH connections to be dropped after stopping a VM
while running NetworkManager.
NetworkManager caches the IPv6 address configuration, when a RA arrives,
it determines the list of addresses to configure and checks if the
addresses are already in the right order in the kernel. If they aren't,
NetworkManager removes and re-adds them to achieve the desired order.
As the order changes, NetworkManager is confused and reconfigures the
addresses on every update. In addition, this would also affect to cloud
tooling that relies on IPv6 addresses order to identify primary and
secondaries addresses.
This reverts commit cb3de96eea.
Fixes: cb3de96eea ("ipv6: preserve insertion order for same-scope addresses")
Reported-by: Chris Adams <linux@cmadams.net>
Closes: https://lore.kernel.org/netdev/20260521135310.GC977@cmadams.net/
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260529112357.5079-1-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NQJ5
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2026-05-29' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2026-05-29
1) xfrm: route MIGRATE notifications to caller's netns
Thread the caller's netns through km_migrate() so that
MIGRATE notifications go to the issuing netns, fixing both the
init_net listener leak and MOBIKE notifications inside
non-init netns. From Maoyi Xie.
2) xfrm: ipcomp: Free destination pages on acomp errors
Move the out_free_req label up so that allocated destination
pages are released on decompression errors, not only on success.
From Herbert Xu.
3) xfrm: Check for underflow in xfrm_state_mtu
Reject configurations that cause xfrm_state_mtu() to underflow,
preventing a negative TFCPAD value from becoming a memset size
that triggers an out-of-bounds write of several terabytes.
From David Ahern.
4) xfrm: ah: use skb_to_full_sk in async output callbacks
Convert the possibly-incomplete skb->sk to a full socket pointer
in async AH callbacks so that a request_sock or timewait_sock
never reaches xfrm_output_resume() downstream consumers.
From Michael Bommarito.
5) Add and revert: esp: fix page frag reference leak on skb_to_sgvec failure
The patch does not fix te issue completely.
6) xfrm: esp: restore combined single-frag length gate
Check the aligned post-trailer combined length against a page limit
in the fast path, preventing skb_page_frag_refill() from falling
back to a page too small for the destination scatterlist.
From Jingguo Tan.
7) xfrm: iptfs: reset runtime state when cloning SAs
Reinitialise the clone's mode_data runtime objects before
publishing it, preventing queued skbs from being freed with
list state copied from the original SA when migration fails.
From Shaomin Chen.
8) xfrm: move policy_bydst RCU sync from per-netns .exit to .pre_exit
Flush policy tables and drain the workqueue in a .pre_exit handler
so that cleanup_net() pays one RCU grace period per batch instead
of one per namespace, fixing stalls at high CLONE_NEWNET rates.
From Usama Arif.
9) xfrm: input: hold netns during deferred transport reinjection
Take a netns reference when queueing deferred transport reinjection
work and drop it after the callback completes, keeping the skb->cb
net pointer valid until the deferred work runs.
From Zhengchuan Liang.
* tag 'ipsec-2026-05-29' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
Revert "esp: fix page frag reference leak on skb_to_sgvec failure"
xfrm: input: hold netns during deferred transport reinjection
xfrm: move policy_bydst RCU sync from per-netns .exit to .pre_exit
xfrm: iptfs: reset runtime state when cloning SAs
xfrm: esp: restore combined single-frag length gate
esp: fix page frag reference leak on skb_to_sgvec failure
xfrm: ah: use skb_to_full_sk in async output callbacks
xfrm: Check for underflow in xfrm_state_mtu
xfrm: ipcomp: Free destination pages on acomp errors
xfrm: route MIGRATE notifications to caller's netns
====================
Link: https://patch.msgid.link/20260529092648.3878973-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Found while auditing the same pattern Sashiko reported in
rt6_fill_node() [1]. Apply the same fix as
commit f8d8ce1b51 ("ipv6: fix possible infinite loop in fib6_info_uses_dev()").
Writers holding tb6_lock can list_del_rcu(&first->fib6_siblings)
without waiting for RCU readers; first->fib6_siblings.next then
still points into the old ring and this softirq-side walker never
reaches &first->fib6_siblings as its terminator. fib6_purge_rt()
always WRITE_ONCE()s first->fib6_nsiblings to 0 before
list_del_rcu(), so an inside-loop check is a reliable detach signal.
[1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev
Fixes: d9ccb18f83 ("ipv6: Fix soft lockups in fib6_select_path under high next hop churn")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260527053133.180695-2-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko reported this issue [1]. Apply the same fix as
commit f8d8ce1b51 ("ipv6: fix possible infinite loop in fib6_info_uses_dev()").
Writers holding tb6_lock can list_del_rcu(&rt->fib6_siblings)
without waiting for RCU readers; rt->fib6_siblings.next then still
points into the old ring and this softirq-side walker never reaches
&rt->fib6_siblings, causing a CPU stall. fib6_del_route() always
WRITE_ONCE()s rt->fib6_nsiblings to 0 before list_del_rcu(), so an
inside-loop check is a reliable detach signal.
[1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev
Fixes: d9ccb18f83 ("ipv6: Fix soft lockups in fib6_select_path under high next hop churn")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260527053133.180695-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 2982e599ff.
The patch does not fully fix the issue and the Author does
not match the 'Signed-off-by:' tag, so revert it for now.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
ipv6_rpl_srh_decompress() computes:
outhdr->hdrlen = (((n + 1) * sizeof(struct in6_addr)) >> 3);
hdrlen is __u8. For n >= 127 the result exceeds 255 and silently
truncates. With n=127 (cmpri=15, cmpre=15, pad=0, hdrlen=16):
(128 * 16) >> 3 = 256, truncated to 0 as __u8
The caller in ipv6_rpl_srh_rcv() then places the compressed header
at buf + ((ohdr->hdrlen + 1) << 3). With hdrlen=0 this is buf + 8,
but the decompressed region occupies buf[0..2055] (8-byte header
plus 128 full addresses). The compressed header overlaps the
decompressed data, and ipv6_rpl_srh_compress() writes into this
overlap, corrupting the routing header of the forwarded packet.
The existing guard at exthdrs.c:546 checks (n + 1) > 255, which
prevents n+1 from overflowing unsigned char (the segments_left
field), but does not prevent the computed hdrlen from overflowing
__u8. n=127 passes because 128 <= 255, yet hdrlen=256 does not
fit.
Tighten the bound to (n + 1) > 127. This caps n at 126, giving
hdrlen = (127 * 16) >> 3 = 254, which fits in __u8. The compressed
header then lands at buf + ((254 + 1) << 3) = buf + 2040, exactly
past the decompressed region (buf[0..2039]). No overlap. 127
segments is well beyond any realistic RPL deployment.
Fixes: 8610c7c6e3 ("net: ipv6: add support for rpl sr exthdr")
Signed-off-by: Rahul Chandelkar <rc@rexion.ai>
Link: https://patch.msgid.link/20260525154031.2290876-1-rc@rexion.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commits e1ae5c2ea4 ("vrf: Increment Icmp6InMsgs on the original
netdev") and bdb7cc643f ("ipv6: Count interface receive statistics
on the ingress netdev") net/ipv6/reassembly.c uses three different
ways to reach idev in various __IP6_INC_STATS() calls.
- ip6_dst_idev(skb_dst(skb))
- __in6_dev_get_safely(skb->dev)
- __in6_dev_stats_get(skb->dev)
Lets centralize this from ipv6_frag_rcv() and use __in6_dev_stats_get().
Note that ipv6_frag_rcv() tests if skb->dev could be NULL already, so
I chose to also guard against NULL, but we probably can remove the
tests in a followup patch, because I do not think skb->dev could be NULL.
iif = skb->dev ? skb->dev->ifindex : 0;
idev can be NULL, __IP6_INC_STATS() deals with this possibility.
Small code size reduction as a bonus.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-145 (-145)
Function old new delta
ipv6_frag_rcv 2399 2362 -37
ip6_frag_reasm 705 597 -108
Total: Before=31455552, After=31455407, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260526145529.3587126-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
/proc/net/igmp6 walks IPv6 multicast memberships under RCU and prints
mca_users without holding idev->mc_lock, while multicast join and leave
paths update the field while holding idev->mc_lock. Annotate this
intentional lockless snapshot with READ_ONCE() and the matching writers
with WRITE_ONCE().
Signed-off-by: Yuyang Huang <sigefriedhyy@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260524022456.20689-1-sigefriedhyy@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6_datagram_recv_specific_ctl() builds IPV6_{HOPOPTS,DSTOPTS,RTHDR}
cmsgs (and their IPV6_2292* legacy counterparts) by trusting the
on-wire hdrlen byte (ptr[1]) when computing the put_cmsg() length.
The length was validated only at parse time (ipv6_parse_hopopts(),
etc.). An nftables payload-write expression can rewrite hdrlen after
parsing and before the skb reaches recvmsg; the write itself is
in-bounds but put_cmsg() then reads up to ((hdrlen+1) << 3) = 2040
bytes from an 8-byte header. nftables is reachable from an
unprivileged user namespace, so this is an unprivileged
slab-out-of-bounds read:
BUG: KASAN: slab-out-of-bounds in put_cmsg+0x3ac/0x540
put_cmsg+0x3ac/0x540
udpv6_recvmsg+0xca0/0x1250
sock_recvmsg+0xdf/0x190
____sys_recvmsg+0x1b1/0x620
Add ipv6_get_exthdr_len() which validates that at least two bytes
are accessible before reading the hdrlen field, then checks the
computed length against skb_tail_pointer(skb), returning 0 on
failure. Extension headers are kept in the linear skb area by
pskb_may_pull() during input, so skb_tail_pointer() is the correct
bound.
Use ipv6_get_exthdr_len() at all non-AH call sites: the five
standalone cmsg blocks (HbH, 2292HbH, 2292DSTOPTS x2, 2292RTHDR)
and the three standard cases in the extension-header walk loop
(DSTOPTS, ROUTING, default). AH retains an inline bounds check
because its length formula differs ((ptr[1]+2)<<2).
The walk loop also gets a pre-read bounds check at the top to
validate ptr before any case accesses ptr[0] or ptr[1].
When the walk loop detects a corrupted header, return from the
function instead of continuing to process later socket options.
Cc: stable@vger.kernel.org
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Qi Tang <tpluszz77@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260523143245.2281415-1-tpluszz77@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bkBh
-----END PGP SIGNATURE-----
Merge tag 'nf-next-26-05-25' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter: updates for net-next
The following patchset contains Netfilter fixes and small enhancements:
1) Disable 32-bit x_tables compatibility (32bit binaries on 64bit
kernel) interface in user namespaces. This is 'last warning'
before this is removed for good.
2) Add a configuration toggle for netfilter GCOV profiling. Provide
dedicated toggles for ipset and ipvs.
3) Remove modular support for nfnetlink and restrict it to built-in only.
From Pablo Neira Ayuso.
4) Use per-rule hash initval in nf_conncount. This avoids unecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
5) Use nf_ct_exp_net() in ctnetlink expectation dumps.
From Pratham Gupta.
6) Remove a dead conditional in nft_set_rbtree.
7) Fix conntrack helper policy updates to apply per-class values correctly.
From David Carlier.
8) Fix an off-by-one OOB read in nf_conntrack_irc:parse_dcc(). Use strict
less-than comparison in the newline search loop to respect the
exclusive-end pointer convention. From Muhammad Bilal.
9) Fix typos in nf_conntrack_proto_tcp comments. From Avinash Duduskar.
10) Restore performance optimization in nft_set_pipapo_avx2 by passing
the next map index. Refactor lookup logic for clarity and add a
DEBUG_NET check to document this.
11) Avoid (harmless) u16 overflow in nf_conntrack_ftp when parsing FTP PORT
and EPRT commands. Ignore commands where single octet exceeds 255.
From Giuseppe Caruso.
Patch 12, which removes incorrect (and obviously unused) code from
nft_byteorder was kept back to avoid a net -> net-next merge conflict.
* tag 'nf-next-26-05-25' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_conntrack_ftp: avoid u16 overflows
netfilter: nft_set_pipapo_avx2: restore performance optimization
netfilter: nf_conntrack_proto_tcp: fix typos in comments
netfilter: nf_conntrack_irc: fix parse_dcc() off-by-one OOB read
netfilter: nfnl_cthelper: apply per-class values when updating policies
netfilter: nft_set_rbtree: remove dead conditional
netfilter: ctnetlink: use nf_ct_exp_net() in expectation dump
netfilter: nf_conncount: use per-rule hash initval
netfilter: allow nfnetlink built-in only
netfilter: add option for GCOV profiling
netfilter: x_tables: disable 32bit compat interface in user namespaces
====================
Link: https://patch.msgid.link/20260525182924.28456-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a router temporarily deprecates an IPv6 prefix (either by sending a
Router Advertisement with Preferred Lifetime = 0 or by letting the
lifetime expire) and later restores it, the kernel permanently loses its
ability to generate temporary privacy addresses (RFC 8981) for that
prefix.
This happens because the address worker attempts to generate a
replacement temporary address when the current one nears expiration. As
the base prefix is deprecated already, the generation fails after
marking the temporary address as already having spawned a replacement
(ifp->regen_count++).
When the router eventually restores the prefix, the temporary address
becomes active again. However, once it naturally expires, the address
worker sees this temporary address already tried to generate one and
skips the regeneration.
Fix the issue by resetting the regen_count check of the latest temp
address generated for the prefix updated by the incoming RA.
Reported-by: Łukasz Stelmach <steelman@post.pl>
Closes: https://lore.kernel.org/netdev/87340td30q.fsf%25steelman@post.pl/
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260523103811.3790-1-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After patch 1/2 in this series, vti6_update() unlinks and relinks
the tunnel through t->net. vti6_siocdevprivate() still uses
dev_net(dev) for the collision lookup. For a tunnel moved through
IFLA_NET_NS_FD, dev_net(dev) is the new netns, not t->net.
SIOCCHGTUNNEL on a migrated tunnel then runs:
net = dev_net(dev) /* migrated netns */
t = vti6_locate(net, &p1, false) /* misses target in t->net */
...
t = netdev_priv(dev)
vti6_update(t, &p1, false) /* mutates t->net's hash */
A caller in the migrated netns picks params that match a tunnel
in the creation netns. The lookup in dev_net(dev) finds nothing.
vti6_update() prepends the migrated tunnel at the head of the
creation netns hash bucket for those params. Later lookups in
the creation netns resolve to the migrated device. xfrm receive
delivers the matched packets through a device the caller controls.
Reachable from an unprivileged user namespace (unshare --user
--map-root-user --net). Cross tenant scope on container hosts.
Switch the SIOCCHGTUNNEL path on a non fallback device to use
t->net for the lookup. The lookup now matches the netns
vti6_update() operates on.
Also add ns_capable(self->net->user_ns, CAP_NET_ADMIN) before
the lookup. The check at the top of the case is against
dev_net(dev)->user_ns, which after migration is the attacker's
netns. A caller there can pick params absent from self->net,
the lookup returns NULL, t becomes self, and vti6_update()
inserts the device into the creation netns hash. The new check
requires CAP_NET_ADMIN in the creation netns user_ns too.
SIOCADDTUNNEL and SIOCCHGTUNNEL on the fallback device keep
dev_net(dev), which equals init_net there.
Fixes: 61220ab349 ("vti6: Enable namespace changing")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Xiao Liang <shaw.leon@gmail.com>
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Link: https://patch.msgid.link/20260521130555.3421684-3-maoyixie.tju@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ip netns add ns1
ip netns add ns2
ip -n ns1 link add vti6_test type vti6 remote ::1 local ::2 key 7
ip -n ns1 link set vti6_test netns ns2
ip -n ns2 link set vti6_test type vti6 remote ::3 local ::4 key 9
ip netns del ns2
ip netns del ns1
[ 132.495484] ------------[ cut here ]------------
[ 132.497609] kernel BUG at net/core/dev.c:12376!
Commit 61220ab349 ("vti6: Enable namespace changing") dropped
NETIF_F_NETNS_LOCAL from vti6 devices. A vti6 tunnel can then
move through IFLA_NET_NS_FD. After the move dev_net(dev) points
at the new netns while t->net stays at the creation netns.
vti6_changelink() and vti6_update() still use dev_net(dev) and
dev_net(t->dev). They unlink from one per netns hash and relink
into another. The creation netns is left with a stale entry.
cleanup_net() of that netns later walks freed memory.
Reachable from an unprivileged user namespace (unshare --user
--map-root-user --net). Cross tenant scope on container hosts.
Fixes: 61220ab349 ("vti6: Enable namespace changing")
Reported-by: Maoyi Xie <maoyi.xie@ntu.edu.sg>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260521130555.3421684-2-maoyixie.tju@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ip6_parse_tlv() caches skb_network_header(skb) in nh while walking
IPv6 TLVs.
ipv6_dest_hao() may call pskb_expand_head() for a cloned skb, which can
move the skb head and invalidate the cached network header pointer.
Refresh nh after ipv6_dest_hao() returns so any trailing padding or TLVs
are parsed from the current skb head.
This matches the existing pattern used in ip6_parse_tlv() after helpers
that can modify skb header storage.
Fixes: a831f5bbc8 ("[IPV6] MIP6: Add inbound interface of home address option.")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Co-developed-by: Luxing Yin <tr0jan@lzu.edu.cn>
Signed-off-by: Luxing Yin <tr0jan@lzu.edu.cn>
Signed-off-by: Zhengchuan Liang <zcliangcn@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Justin Iurman <justin.iurman@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/7aba1debc2196189172499e5769802b026f8caf8.1779247873.git.zcliangcn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to a few other subsystems: add a new config toggle to
enable netfilter gcov profiling in netfilter, including ebtables,
arptables and so on.
ipset and ipvs gain their own, dedicated toggles.
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
This feature is required to use 32bit arp/ip/ip6/ebtables binaries on
64bit kernels. I don't think there are many users left.
Support has been a compile-time option since 2021 and defaults to off
since 2023.
The XTABLES_COMPAT config option is already off in many distributions
including Debian and Fedora.
Give a few more months before complete removal but disable support in
user namespaces already.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Florian Westphal <fw@strlen.de>
nft_fib6_info_nh_uses_dev() runs from nft_fib6_eval() in softirq under
rcu_read_lock(). fib6_siblings is modified by writers that hold
tb6_lock but do not wait for RCU readers, so the sibling walk should
use list_for_each_entry_rcu(): it adds READ_ONCE() on the ->next
pointer and lets CONFIG_PROVE_RCU_LIST validate the locking.
No functional change for non-debug builds.
Fixes: 1c32b24c23 ("netfilter: nft_fib_ipv6: switch to fib6_lookup")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Florian Westphal <fw@strlen.de>
The ESP out-of-place fast path appends the trailer in esp_output_head()
before esp_output_tail() allocates the destination page frag. The
head-side gate currently checks skb->data_len and tailen separately, but
the tail code allocates a single destination frag from the combined
post-trailer skb->data_len.
Reject the page-frag fast path when the combined aligned length exceeds a
page. Otherwise skb_page_frag_refill() may fall back to a single page while
the destination sg still spans the combined skb->data_len.
Restore this combined-length page gate for both IPv4 and IPv6.
Fixes: 5bd8baab08 ("esp: limit skb_page_frag_refill use to a single page")
Cc: stable@vger.kernel.org
Signed-off-by: Lin Ma <malin89@huawei.com>
Signed-off-by: Chenyuan Mi <michenyuan@huawei.com>
Signed-off-by: Jingguo Tan <tanjingguo@huawei.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In esp_output_tail(), when esp->inplace is false, the old skb page frags
are replaced with a new page from the xfrm page_frag cache. The source
scatterlist (sg) is built from the old frags before the replacement, and
esp_ssg_unref() is responsible for releasing the old page references
after the crypto operation completes.
However, if the second skb_to_sgvec() call (which builds the destination
scatterlist from the new page) fails, the code jumps to error_free which
only calls kfree(tmp). The old page frag references captured in the
source scatterlist are never released:
1. sg[] is built from old frags via skb_to_sgvec() (no extra get_page)
2. nr_frags is set to 1 and frag[0] is replaced with the new page
3. Second skb_to_sgvec() fails -> goto error_free
4. kfree(tmp) frees the sg[] memory but old frags are not unref'd
5. kfree_skb() only releases frag[0] (the new page), not the old ones
Fix this by adding a bool parameter to esp_ssg_unref() that, when true,
unconditionally unrefs the source scatterlist frags without checking
req->src and req->dst, since those fields are not yet initialized by
aead_request_set_crypt() at the point of the error. Existing callers
pass false to preserve the original behavior.
The same issue exists in both esp4 and esp6 as the code is identical.
Fixes: cac2661c53 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Alessandro Schino <7991aleschino@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Reported by Sashiko:
In ipv6_hop_ioam(), the hdr pointer is initialized to point into the
skb's linear data buffer. Later, the code calls skb_ensure_writable(),
which might reallocate the buffer:
if (skb_ensure_writable(skb, optoff + 2 + hdr->opt_len))
goto drop;
/* Trace pointer may have changed */
trace = (struct ioam6_trace_hdr *)(skb_network_header(skb)
+ optoff + sizeof(*hdr));
ioam6_fill_trace_data(skb, ns, trace, true);
ioam6_event(IOAM6_EVENT_TRACE, dev_net(skb->dev),
GFP_ATOMIC, (void *)trace, hdr->opt_len - 2);
If the skb is cloned or lacks sufficient linear headroom,
skb_ensure_writable() will invoke pskb_expand_head(), which reallocates
the skb's data buffer and frees the old one, invalidating pointers to
it. While the code recalculates the trace pointer immediately after the
call to skb_ensure_writable(), it fails to recalculate the hdr pointer.
This patch fixes the above by recalculating the hdr pointer before
passing hdr->opt_len to ioam6_event(), so that we avoid any UaF.
Fixes: f655c78d62 ("net: exthdrs: ioam6: send trace event")
Cc: stable@vger.kernel.org
Signed-off-by: Justin Iurman <justin.iurman@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260520124242.32320-1-justin.iurman@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6_route_init() registers ip6_route_dev_notifier before registering the
IPv6 route BPF iterator target. If bpf_iter_register() fails after the
notifier has been registered, the error path currently jumps to
out_register_late_subsys and unwinds the RTNL handlers and pernet route
state without removing the notifier from the netdevice notifier chain.
This leaves ip6_route_dev_notify() callable after the IPv6 route state it
uses has been torn down. Add a separate unwind label for the BPF iterator
failure path and unregister the netdevice notifier before continuing with
the existing cleanup.
Fixes: 138d0be35b ("net: bpf: Add netlink and ipv6_route bpf_iter targets")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260520030329.1061183-1-dbgh9129@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Blamed commit moved the TIME_WAIT-derived ISN from the skb control
block to a per-CPU variable, assuming the value would always be consumed
by tcp_conn_request() for the same packet that wrote it. That assumption
is violated by multiple drop paths between the producer
(__this_cpu_write(tcp_tw_isn, isn) in tcp_v{4,6}_rcv()) and the consumer
(tcp_conn_request()):
- min_ttl / min_hopcount check
- xfrm policy check
- tcp_inbound_hash() MD5/AO mismatch
- tcp_filter() eBPF/SO_ATTACH_FILTER drop
- th->syn && th->fin discard in tcp_rcv_state_process() TCP_LISTEN
- psp_sk_rx_policy_check() in tcp_v{4,6}_do_rcv()
- tcp_checksum_complete() in tcp_v{4,6}_do_rcv()
- tcp_v{4,6}_cookie_check() returning NULL
When a packet is dropped on any of these paths, tcp_tw_isn is left set.
The next SYN processed on the same CPU then consumes the non zero value in
tcp_conn_request(), receiving a potentially predictable ISN.
This patch moves back tcp_tw_isn to skb->cb[], getting rid of the per-cpu
variable.
Note that tcp_v{4,6}_fill_cb() do not set it.
Very litle impact on overall code size/complexity:
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 2/1 up/down: 8/-15 (-7)
Function old new delta
tcp_v6_rcv 3038 3042 +4
tcp_v4_rcv 3035 3039 +4
tcp_conn_request 2938 2923 -15
Total: Before=24436060, After=24436053, chg -0.00%
Fixes: 41eecbd712 ("tcp: replace TCP_SKB_CB(skb)->tcp_tw_isn with a per-cpu field")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260519084611.2485277-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reported by Sashiko:
The function ipv6_hop_ioam() accesses
__in6_dev_get(skb->dev)->cnf.ioam6_enabled without validating the returned
idev pointer. Because addrconf_ifdown() can concurrently clear dev->ip6_ptr
via RCU, __in6_dev_get() can return NULL during interface teardown, which
could cause a NULL pointer dereference when processing an IOAM Hop-by-Hop
option.
Let's add a check and use SKB_DROP_REASON_IPV6DISABLED accordingly.
Fixes: 9ee11f0fff ("ipv6: ioam: Data plane support for Pre-allocated Trace")
Cc: stable@vger.kernel.org
Signed-off-by: Justin Iurman <justin.iurman@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260517183059.29140-1-justin.iurman@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
