Commit graph

1,199,813 commits

Author SHA1 Message Date
Jingbo Xu
5a8ffb1975 erofs: make the size of read data stored in buffer_ofs
Since now xattr_iter structures have been unified, make the size of the
read data stored in buffer_ofs.  Don't bother reusing buffer_size for
this use, which may be confusing.

This is in preparation for the following further cleanup.

Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230613074114.120115-4-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2023-06-18 12:10:54 +08:00
Jingbo Xu
8e823961de erofs: unify xattr_iter structures
Unify xattr_iter/listxattr_iter/getxattr_iter structures into
erofs_xattr_iter structure.

This is in preparation for the following further cleanup.

Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230613074114.120115-3-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2023-06-18 12:10:53 +08:00
Jingbo Xu
eba67eb6de erofs: use absolute position in xattr iterator
Replace blkaddr/ofs with pos in 'struct erofs_xattr_iter'.

After erofs_bread() is introduced to replace raw page cache APIs for
metadata I/Os handling, xattr_iter_fixup() is no longer needed anymore.

In addition, it is also unnecessary to check if the iterated position is
span over the block boundary as absolute offset is used instead of
blkaddr + offset pairs.

Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230613074114.120115-2-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2023-06-18 12:10:53 +08:00
Gao Xiang
001b8ccd06 erofs: fix compact 4B support for 16k block size
In compact 4B, two adjacent lclusters are packed together as a unit to
form on-disk indexes for effective random access, as below:

(amortized = 4, vcnt = 2)
       _____________________________________________
      |___@_____ encoded bits __________|_ blkaddr _|
      0        .                                    amortized * vcnt = 8
      .             .
      .                  .              amortized * vcnt - 4 = 4
      .                        .
      .____________________________.
      |_type (2 bits)_|_clusterofs_|

Therefore, encoded bits for each pack are 32 bits (4 bytes). IOWs,
since each lcluster can get 16 bits for its type and clusterofs, the
maximum supported lclustersize for compact 4B format is 16k (14 bits).

Fix this to enable compact 4B format for 16k lclusters (blocks), which
is tested on an arm64 server with 16k page size.

Fixes: 152a333a58 ("staging: erofs: add compacted compression indexes support")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230601112341.56960-1-hsiangkao@linux.alibaba.com
2023-06-18 12:10:53 +08:00
Jingbo Xu
9c39ec0cff erofs: convert erofs_read_metabuf() to erofs_bread() for xattr
buf->inode is constant once initialized during erofs_buf's lifetime.
Thus call erofs_init_metabuf() and erofs_bread() separately to avoid
the repetition of assigning buf->inode when iterating xattrs.

Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230601024347.108469-2-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2023-06-18 12:10:53 +08:00
Gao Xiang
43d86ec936 erofs: use poison pointer to replace the hard-coded address
It's safer and cleaner to replace such hard-coded illegal pointer
with poison pointers.

Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Link: https://lore.kernel.org/r/20230526201459.128169-7-hsiangkao@linux.alibaba.com
2023-06-18 12:10:53 +08:00
Gao Xiang
7674a42f35 erofs: use struct lockref to replace handcrafted approach
Let's avoid the current handcrafted lockref although `struct lockref`
inclusion usually increases extra 4 bytes with an explicit spinlock if
CONFIG_DEBUG_SPINLOCK is off.

Apart from the size difference, note that the meaning of refcount is
also changed to active users. IOWs, it doesn't take an extra refcount
for XArray tree insertion.

I don't observe any significant performance difference at least on
our cloud compute server but the new one indeed simplifies the
overall codebase a bit.

Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Link: https://lore.kernel.org/r/20230529123727.79943-1-hsiangkao@linux.alibaba.com
2023-06-18 12:10:47 +08:00
Guenter Roeck
aee395bb19 hwmon: (nct6755) Add support for NCT6799D
NCT6799D is mostly compatible to NCT6798D, with minor variations.

Note that NCT6798D and NCT6799D have a new means to select temperature
sources, and to report temperatures from those sources. This is not
currently implemented, meaning that most likely not all temperatures
are reported.

Cc: Sebastian Arnhold <sebastian.arnhold@posteo.de>
Cc: Ahmad Khalifa <ahmad@khalifa.ws>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Sebastian Arnhold <sebastian.arnhold@posteo.de>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Link: https://lore.kernel.org/r/20221228135744.281752-1-linux@roeck-us.net
2023-06-17 20:50:30 -07:00
Joaquín Ignacio Aramendía
be144ee491 hwmon: (oxp-sensors) Add tt_toggle attribute on supported boards
OneXPlayer boards from the last generation (both for OneXPlayer and AOK
ZOE brands) have a toggle in the EC to switch the "Turbo/Silent" button
into a different keyboard event.

Add a means to use that "Turbo button takeover" function and expose it
to userspace in a custom sysfs `tt_toggle` attribute. It can be read to
take the current state. Write 1|0 to activate the function. The specific
keycode is dependent on the board but can be checked by running
`evtest` utility.

Newer BIOS on the OneXPlayer added this function aside from string changes.
Add a board enum to differentiate it from the old OneXplayer Mini AMD BIOS.

Currently known supported boards:
- AOK ZOE A1
- OneXPlayer Mini AMD (only newer BIOS version supported)
- OneXPlayer Mini Pro

Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
Link: https://lore.kernel.org/r/20230611143332.40590-2-samsagax@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-17 20:49:18 -07:00
Dexuan Cui
067d6ec7ed PCI: hv: Add a per-bus mutex state_lock
In the case of fast device addition/removal, it's possible that
hv_eject_device_work() can start to run before create_root_hv_pci_bus()
starts to run; as a result, the pci_get_domain_bus_and_slot() in
hv_eject_device_work() can return a 'pdev' of NULL, and
hv_eject_device_work() can remove the 'hpdev', and immediately send a
message PCI_EJECTION_COMPLETE to the host, and the host immediately
unassigns the PCI device from the guest; meanwhile,
create_root_hv_pci_bus() and the PCI device driver can be probing the
dead PCI device and reporting timeout errors.

Fix the issue by adding a per-bus mutex 'state_lock' and grabbing the
mutex before powering on the PCI bus in hv_pci_enter_d0(): when
hv_eject_device_work() starts to run, it's able to find the 'pdev' and call
pci_stop_and_remove_bus_device(pdev): if the PCI device driver has
loaded, the PCI device driver's probe() function is already called in
create_root_hv_pci_bus() -> pci_bus_add_devices(), and now
hv_eject_device_work() -> pci_stop_and_remove_bus_device() is able
to call the PCI device driver's remove() function and remove the device
reliably; if the PCI device driver hasn't loaded yet, the function call
hv_eject_device_work() -> pci_stop_and_remove_bus_device() is able to
remove the PCI device reliably and the PCI device driver's probe()
function won't be called; if the PCI device driver's probe() is already
running (e.g., systemd-udev is loading the PCI device driver), it must
be holding the per-device lock, and after the probe() finishes and releases
the lock, hv_eject_device_work() -> pci_stop_and_remove_bus_device() is
able to proceed to remove the device reliably.

Fixes: 4daace0d8c ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230615044451.5580-6-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-06-18 03:05:40 +00:00
Dexuan Cui
a847234e24 Revert "PCI: hv: Fix a timing issue which causes kdump to fail occasionally"
This reverts commit d6af2ed29c.

The statement "the hv_pci_bus_exit() call releases structures of all its
child devices" in commit d6af2ed29c is not true: in the path
hv_pci_probe() -> hv_pci_enter_d0() -> hv_pci_bus_exit(hdev, true): the
parameter "keep_devs" is true, so hv_pci_bus_exit() does *not* release the
child "struct hv_pci_dev *hpdev" that is created earlier in
pci_devices_present_work() -> new_pcichild_device().

The commit d6af2ed29c was originally made in July 2020 for RHEL 7.7,
where the old version of hv_pci_bus_exit() was used; when the commit was
rebased and merged into the upstream, people didn't notice that it's
not really necessary. The commit itself doesn't cause any issue, but it
makes hv_pci_probe() more complicated. Revert it to facilitate some
upcoming changes to hv_pci_probe().

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Wei Hu <weh@microsoft.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230615044451.5580-5-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-06-18 03:05:39 +00:00
Dexuan Cui
add9195e69 PCI: hv: Remove the useless hv_pcichild_state from struct hv_pci_dev
The hpdev->state is never really useful. The only use in
hv_pci_eject_device() and hv_eject_device_work() is not really necessary.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230615044451.5580-4-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-06-18 03:05:39 +00:00
Dexuan Cui
2738d5ab79 PCI: hv: Fix a race condition in hv_irq_unmask() that can cause panic
When the host tries to remove a PCI device, the host first sends a
PCI_EJECT message to the guest, and the guest is supposed to gracefully
remove the PCI device and send a PCI_EJECTION_COMPLETE message to the host;
the host then sends a VMBus message CHANNELMSG_RESCIND_CHANNELOFFER to
the guest (when the guest receives this message, the device is already
unassigned from the guest) and the guest can do some final cleanup work;
if the guest fails to respond to the PCI_EJECT message within one minute,
the host sends the VMBus message CHANNELMSG_RESCIND_CHANNELOFFER and
removes the PCI device forcibly.

In the case of fast device addition/removal, it's possible that the PCI
device driver is still configuring MSI-X interrupts when the guest receives
the PCI_EJECT message; the channel callback calls hv_pci_eject_device(),
which sets hpdev->state to hv_pcichild_ejecting, and schedules a work
hv_eject_device_work(); if the PCI device driver is calling
pci_alloc_irq_vectors() -> ... -> hv_compose_msi_msg(), we can break the
while loop in hv_compose_msi_msg() due to the updated hpdev->state, and
leave data->chip_data with its default value of NULL; later, when the PCI
device driver calls request_irq() -> ... -> hv_irq_unmask(), the guest
crashes in hv_arch_irq_unmask() due to data->chip_data being NULL.

Fix the issue by not testing hpdev->state in the while loop: when the
guest receives PCI_EJECT, the device is still assigned to the guest, and
the guest has one minute to finish the device removal gracefully. We don't
really need to (and we should not) test hpdev->state in the loop.

Fixes: de0aa7b2f9 ("PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230615044451.5580-3-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-06-18 03:05:39 +00:00
Dexuan Cui
440b5e3663 PCI: hv: Fix a race condition bug in hv_pci_query_relations()
Since day 1 of the driver, there has been a race between
hv_pci_query_relations() and survey_child_resources(): during fast
device hotplug, hv_pci_query_relations() may error out due to
device-remove and the stack variable 'comp' is no longer valid;
however, pci_devices_present_work() -> survey_child_resources() ->
complete() may be running on another CPU and accessing the no-longer-valid
'comp'. Fix the race by flushing the workqueue before we exit from
hv_pci_query_relations().

Fixes: 4daace0d8c ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230615044451.5580-2-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-06-18 03:05:39 +00:00
Damien Le Moal
6aa0365a3c ata: libata-scsi: Avoid deadlock on rescan after device resume
When an ATA port is resumed from sleep, the port is reset and a power
management request issued to libata EH to reset the port and rescanning
the device(s) attached to the port. Device rescanning is done by
scheduling an ata_scsi_dev_rescan() work, which will execute
scsi_rescan_device().

However, scsi_rescan_device() takes the generic device lock, which is
also taken by dpm_resume() when the SCSI device is resumed as well. If
a device rescan execution starts before the completion of the SCSI
device resume, the rcu locking used to refresh the cached VPD pages of
the device, combined with the generic device locking from
scsi_rescan_device() and from dpm_resume() can cause a deadlock.

Avoid this situation by changing struct ata_port scsi_rescan_task to be
a delayed work instead of a simple work_struct. ata_scsi_dev_rescan() is
modified to check if the SCSI device associated with the ATA device that
must be rescanned is not suspended. If the SCSI device is still
suspended, ata_scsi_dev_rescan() returns early and reschedule itself for
execution after an arbitrary delay of 5ms.

Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Joe Breuer <linux-kernel@jmbreuer.net>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217530
Fixes: a19a93e4c6 ("scsi: core: pm: Rely on the device driver core for async power management")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Joe Breuer <linux-kernel@jmbreuer.net>
2023-06-18 12:00:49 +09:00
Jens Axboe
ef7dfac51d io_uring/poll: serialize poll linked timer start with poll removal
We selectively grab the ctx->uring_lock for poll update/removal, but
we really should grab it from the start to fully synchronize with
linked timeouts. Normally this is indeed the case, but if requests
are forced async by the application, we don't fully cover removal
and timer disarm within the uring_lock.

Make this simpler by having consistent locking state for poll removal.

Cc: stable@vger.kernel.org # 6.1+
Reported-by: Querijn Voet <querijnqyn@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-17 20:21:52 -06:00
Michael Kelley
52ae076c3a arm64/hyperv: Use CPUHP_AP_HYPERV_ONLINE state to fix CPU online sequencing
State CPUHP_AP_HYPERV_ONLINE has been introduced to correctly sequence the
initialization of hyperv_pcpu_input_arg. Use this new state for Hyper-V
initialization so that hyperv_pcpu_input_arg is allocated early enough.

Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1684862062-51576-2-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-06-17 23:09:47 +00:00
Michael Kelley
9636be85cc x86/hyperv: Fix hyperv_pcpu_input_arg handling when CPUs go online/offline
These commits

a494aef23d ("PCI: hv: Replace retarget_msi_interrupt_params with hyperv_pcpu_input_arg")
2c6ba42168 ("PCI: hv: Enable PCI pass-thru devices in Confidential VMs")

update the Hyper-V virtual PCI driver to use the hyperv_pcpu_input_arg
because that memory will be correctly marked as decrypted or encrypted
for all VM types (CoCo or normal). But problems ensue when CPUs in the
VM go online or offline after virtual PCI devices have been configured.

When a CPU is brought online, the hyperv_pcpu_input_arg for that CPU is
initialized by hv_cpu_init() running under state CPUHP_AP_ONLINE_DYN.
But this state occurs after state CPUHP_AP_IRQ_AFFINITY_ONLINE, which
may call the virtual PCI driver and fault trying to use the as yet
uninitialized hyperv_pcpu_input_arg. A similar problem occurs in a CoCo
VM if the MMIO read and write hypercalls are used from state
CPUHP_AP_IRQ_AFFINITY_ONLINE.

When a CPU is taken offline, IRQs may be reassigned in state
CPUHP_TEARDOWN_CPU. Again, the virtual PCI driver may fault trying to
use the hyperv_pcpu_input_arg that has already been freed by a
higher state.

Fix the onlining problem by adding state CPUHP_AP_HYPERV_ONLINE
immediately after CPUHP_AP_ONLINE_IDLE (similar to CPUHP_AP_KVM_ONLINE)
and before CPUHP_AP_IRQ_AFFINITY_ONLINE. Use this new state for
Hyper-V initialization so that hyperv_pcpu_input_arg is allocated
early enough.

Fix the offlining problem by not freeing hyperv_pcpu_input_arg when
a CPU goes offline. Retain the allocated memory, and reuse it if
the CPU comes back online later.

Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1684862062-51576-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-06-17 23:09:47 +00:00
Conor Dooley
c1362fd0f2 Merge patch series "Add Sipeed Lichee Pi 4A RISC-V board support"
Jisheng Zhang <jszhang@kernel.org> says:

Sipeed's Lichee Pi 4A development board uses Lichee Module 4A core
module which is powered by T-HEAD's TH1520 SoC. Add minimal device
tree files for the core module and the development board.

Support basic uart/gpio/dmac drivers, so supports booting to a basic
shell.

This also pulls in -rc2, because of some maintainers re-jigging that
went on in the interim in commit 80e62bc848 ("MAINTAINERS: re-sort
all entries and fields").

Link: https://lore.kernel.org/r/20230617161529.2092-1-jszhang@kernel.org
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-06-17 19:19:21 +01:00
Linus Torvalds
1b29d27161 Staging driver fix for 6.4-rc7
Here is a single staging driver "fix" for 6.4-rc7.  I've been sitting on
 it in my tree for many weeks as it is just a simple documentation
 update, with the hope that maybe some other staging driver fixes would
 need to be merged for 6.4-final, but that does not seem to be the case.
 
 So please, pull in this one documentation update so that Aaro doesn't
 get emails going forward that he can't do anything about.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZI2JIw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yn/JACgxBA4COYBVgs14ISqdmcS1WUHtNYAn1NOtbJJ
 Ev/CaazghXhC2fawSZM5
 =kXER
 -----END PGP SIGNATURE-----

Merge tag 'staging-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver fix from Greg KH:
 "Here is a single staging driver "fix" for 6.4-rc7. I've been sitting
  on it in my tree for many weeks as it is just a simple documentation
  update, with the hope that maybe some other staging driver fixes would
  need to be merged for 6.4-final, but that does not seem to be the
  case.

  So please, pull in this one documentation update so that Aaro doesn't
  get emails going forward that he can't do anything about"

* tag 'staging-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: octeon: delete my name from TODO contact
2023-06-17 11:04:10 -07:00
Jisheng Zhang
318afa0812 riscv: defconfig: enable T-HEAD SoC
Enable T-HEAD SoC config in defconfig to allow the default
upstream kernel to boot on Sipeed Lichee Pi 4A board.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-06-17 19:04:08 +01:00
Jisheng Zhang
1203f584fe MAINTAINERS: add entry for T-HEAD RISC-V SoC
Currently, I would like to maintain the T-HEAD RISC-V SoC support.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-06-17 19:04:08 +01:00
Jisheng Zhang
5af4cb0c42 riscv: dts: thead: add sipeed Lichee Pi 4A board device tree
Sipeed's Lichee Pi 4A development board uses Lichee Module 4A core
module which is powered by T-HEAD's TH1520 SoC. Add minimal device
tree files for the core module and the development board.

Support basic uart/gpio/dmac drivers, so supports booting to a basic
shell.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-06-17 19:04:08 +01:00
Jisheng Zhang
8e396880a8 riscv: dts: add initial T-HEAD TH1520 SoC device tree
Add initial device tree for the TH1520 RISC-V SoC by T-HEAD.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-06-17 19:04:08 +01:00
Jisheng Zhang
da47ce0039 riscv: Add the T-HEAD SoC family Kconfig option
The first SoC in the T-HEAD series is TH1520, containing quad T-HEAD
C910 cores.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-06-17 19:04:08 +01:00
Jisheng Zhang
89b0186ab5 dt-bindings: riscv: Add T-HEAD TH1520 board compatibles
Several SoMs and boards are available that feature the T-HEAD TH1520
SoC. Document the compatible strings.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-06-17 19:04:08 +01:00
Jisheng Zhang
413c24b03f dt-bindings: timer: Add T-HEAD TH1520 clint
Add compatible string for the T-HEAD TH1520 clint.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-06-17 19:04:08 +01:00
Jisheng Zhang
a04cc7391d dt-bindings: interrupt-controller: Add T-HEAD's TH1520 PLIC
Add compatible string for T-HEAD TH1520 plic.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-06-17 19:04:08 +01:00
Linus Torvalds
670062e7e4 USB/Thunderbolt Fixes for 6.4-rc7
Here are some small USB and Thunderbolt driver fixes and new device ids
 for 6.4-rc7 to resolve some reported problems.  Included in here are:
   - new USB serial device ids
   - USB gadget core fixes for long-dissussed problems
   - dwc3 bugfixes for reported issues.
   - typec driver fixes
   - thunderbolt driver fixes
 
 All of these have been in linux-next this week with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZI24Fg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yn5SwCglLVWTIiXF+UXoocktinhvroZpp0AoJIy+z6B
 bhGaS1jqKZQMu88swuPZ
 =dSdQ
 -----END PGP SIGNATURE-----

Merge tag 'usb-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt fixes from Greg KH:
 "Here are some small USB and Thunderbolt driver fixes and new device
  ids for 6.4-rc7 to resolve some reported problems. Included in here
  are:

   - new USB serial device ids

   - USB gadget core fixes for long-dissussed problems

   - dwc3 bugfixes for reported issues.

   - typec driver fixes

   - thunderbolt driver fixes

  All of these have been in linux-next this week with no reported issues"

* tag 'usb-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: udc: core: Prevent soft_connect_store() race
  usb: gadget: udc: core: Offload usb_udc_vbus_handler processing
  usb: typec: Fix fast_role_swap_current show function
  usb: typec: ucsi: Fix command cancellation
  USB: dwc3: fix use-after-free on core driver unbind
  USB: dwc3: qcom: fix NULL-deref on suspend
  usb: dwc3: gadget: Reset num TRBs before giving back the request
  usb: gadget: udc: renesas_usb3: Fix RZ/V2M {modprobe,bind} error
  USB: serial: option: add Quectel EM061KGL series
  thunderbolt: Mask ring interrupt on Intel hardware as well
  thunderbolt: Do not touch CL state configuration during discovery
  thunderbolt: Increase DisplayPort Connection Manager handshake timeout
  thunderbolt: dma_test: Use correct value for absent rings when creating paths
2023-06-17 10:57:34 -07:00
Linus Torvalds
3c0eb44233 Serial driver fixes for 6.4-rc7
Here are two small serial driver fixes for 6.4-rc7 that resolve some
 reported problems:
  - lantiq serial driver irq fix
  - fsl_lpuart serial driver watermark fix
 
 Both of these have been in linux-next this week with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZI24vQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymYHgCfS97OsQJZT+4vB7llbeRoiZ7uQEEAoJnllnY9
 Xjqj9XDtWIJYZfFdY0pF
 =HAoX
 -----END PGP SIGNATURE-----

Merge tag 'tty-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull serial driver fixes from Greg KH:
 "Here are two small serial driver fixes for 6.4-rc7 that resolve some
  reported problems:

   - lantiq serial driver irq fix

   - fsl_lpuart serial driver watermark fix

  Both of these have been in linux-next this week with no reported issues"

* tag 'tty-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: fsl_lpuart: reduce RX watermark to 0 on LS1028A
  serial: lantiq: add missing interrupt ack
2023-06-17 10:51:35 -07:00
Chuck Lever
00a87e5d1d SUNRPC: Address RCU warning in net/sunrpc/svc.c
$ make C=1 W=1 net/sunrpc/svc.o
make[1]: Entering directory 'linux/obj/manet.1015granger.net'
  GEN     Makefile
  CALL    linux/server-development/scripts/checksyscalls.sh
  DESCEND objtool
  INSTALL libsubcmd_headers
  DESCEND bpf/resolve_btfids
  INSTALL libsubcmd_headers
  CC [M]  net/sunrpc/svc.o
  CHECK   linux/server-development/net/sunrpc/svc.c
linux/server-development/net/sunrpc/svc.c:1225:9: warning: incorrect type in argument 1 (different address spaces)
linux/server-development/net/sunrpc/svc.c:1225:9:    expected struct spinlock [usertype] *lock
linux/server-development/net/sunrpc/svc.c:1225:9:    got struct spinlock [noderef] __rcu *
linux/server-development/net/sunrpc/svc.c:1227:40: warning: incorrect type in argument 1 (different address spaces)
linux/server-development/net/sunrpc/svc.c:1227:40:    expected struct spinlock [usertype] *lock
linux/server-development/net/sunrpc/svc.c:1227:40:    got struct spinlock [noderef] __rcu *
make[1]: Leaving directory 'linux/obj/manet.1015granger.net'

Warning introduced by commit 913292c97d ("sched.h: Annotate
sighand_struct with __rcu").

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-06-17 13:18:07 -04:00
Azeem Shaikh
a9156d7e7d SUNRPC: Use sysfs_emit in place of strlcpy/sprintf
Part of an effort to remove strlcpy() tree-wide [1].

Direct replacement is safe here since the getter in kernel_params_ops
handles -errno return [2].

[1] https://github.com/KSPP/linux/issues/89
[2] https://elixir.bootlin.com/linux/v6.4-rc6/source/include/linux/moduleparam.h#L52

Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-06-17 13:18:07 -04:00
Chuck Lever
6c53da5d66 SUNRPC: Remove transport class dprintk call sites
Remove a couple of dprintk call sites that are of little value.

Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-06-17 13:18:07 -04:00
Chuck Lever
02cea33f56 SUNRPC: Fix comments for transport class registration
The preceding block comment before svc_register_xprt_class() is
not related to that function.

While we're here, add proper documenting comments for these two
publicly-visible functions.

Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-06-17 13:18:07 -04:00
Chuck Lever
b55c63332e svcrdma: Remove an unused argument from __svc_rdma_put_rw_ctxt()
Clean up.

Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-06-17 13:18:07 -04:00
Chuck Lever
a23c76e92d svcrdma: trace cc_release calls
This event brackets the svcrdma_post_* trace points. If this trace
event is enabled but does not appear as expected, that indicates a
chunk_ctxt leak.

Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-06-17 13:18:06 -04:00
Chuck Lever
91f8ce2846 svcrdma: Convert "might sleep" comment into a code annotation
Try to catch incorrect calling contexts mechanically rather than by
code review.

Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-06-17 13:18:06 -04:00
Chuck Lever
262176798b NFSD: Add an nfsd4_encode_nfstime4() helper
Clean up: de-duplicate some common code.

Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-06-17 13:18:06 -04:00
Chuck Lever
f8335a212a SUNRPC: Move initialization of rq_stime
Micro-optimization: Call ktime_get() only when ->xpo_recvfrom() has
given us a full RPC message to process. rq_stime isn't used
otherwise, so this avoids pointless work.

Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-06-17 13:18:06 -04:00
Chuck Lever
5581cf8efc SUNRPC: Optimize page release in svc_rdma_sendto()
Now that we have bulk page allocation and release APIs, it's more
efficient to use those than it is for nfsd threads to wait for send
completions. Previous patches have eliminated the calls to
wait_for_completion() and complete(), in order to avoid scheduler
overhead.

Now release pages-under-I/O in the send completion handler using
the efficient bulk release API.

I've measured a 7% reduction in cumulative CPU utilization in
svc_rdma_sendto(), svc_rdma_wc_send(), and svc_xprt_release(). In
particular, using release_pages() instead of complete() cuts the
time per svc_rdma_wc_send() call by two-thirds. This helps improve
scalability because svc_rdma_wc_send() is single-threaded per
connection.

Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-06-17 13:18:06 -04:00
Chuck Lever
baf6d18b11 svcrdma: Prevent page release when nothing was received
I noticed that svc_rqst_release_pages() was still unnecessarily
releasing a page when svc_rdma_recvfrom() returns zero.

Fixes: a53d5cb064 ("svcrdma: Avoid releasing a page in svc_xprt_release()")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-06-17 13:18:04 -04:00
JuenKit Yip
fbb5a7fee0 hwmon: (sht3x) complement sysfs interface for sts3x
Compared to sht3x, sts3x has the similar functions and operations
but it has no humidity sensor.

Signed-off-by: JuenKit Yip <JuenKit_Yip@hotmail.com>
Link: https://lore.kernel.org/r/DB4PR10MB6261B912ADFA6BB78240596F9258A@DB4PR10MB6261.EURPRD10.PROD.OUTLOOK.COM
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-17 09:14:55 -07:00
JuenKit Yip
af5ab55012 hwmon: (sht3x) Add new non-stardard sysfs attribute
Add "repeatability" attribute to sysfs, it could be
read or written to control the sensor.

Signed-off-by: JuenKit Yip <JuenKit_Yip@hotmail.com>
Link: https://lore.kernel.org/r/DB4PR10MB6261B507C7656E3568DA33E39258A@DB4PR10MB6261.EURPRD10.PROD.OUTLOOK.COM
[groeck: Fixed multi-line alignment; dropped check of unsigned against < 0]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-17 09:14:39 -07:00
JuenKit Yip
3d2c211c0d hwmon: (sht3x) add medium repeatability support
Add support for medium repeatability.

Per datasheet:

The stated repeatability is 3 times the standard deviation (3σ)
of multiple consecutive measurements at the stated repeatability
and at constant ambient conditions. It is a measure for the noise
on the physical sensor output. Different measurement modes allow
for high/medium/low repeatability.

For the humidity sensor, repeatability is documented as
0.25% RH for low repeatability, 0.15% RH for medium repeatability,
and 0.10% RH for high repeatability. Support all three modes.

Signed-off-by: JuenKit Yip <JuenKit_Yip@hotmail.com>
Link: https://lore.kernel.org/r/DB4PR10MB6261A70CD0444248ADDCC3219258A@DB4PR10MB6261.EURPRD10.PROD.OUTLOOK.COM
[groeck: Added details to description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-17 08:56:42 -07:00
JuenKit Yip
7d6d53ba3b hwmon: (sht3x)replace "high-precision" property to "repeatability"
Replace use of "precision" with "repeatability" to match
datasheet terminology.

No functional change.

Signed-off-by: JuenKit Yip <JuenKit_Yip@hotmail.com>
Link: https://lore.kernel.org/r/DB4PR10MB626113BFFA66DE32C3479D229258A@DB4PR10MB6261.EURPRD10.PROD.OUTLOOK.COM
[groeck: Added commit description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-17 08:54:34 -07:00
JuenKit Yip
5bca68ac63 hwmon: (sht3x) remove blocking_io property
Due to no support on clock-strench, blocking mode was removed and
now single-shot mode only uses non-blocking mode.

Signed-off-by: JuenKit Yip <JuenKit_Yip@hotmail.com>
Link: https://lore.kernel.org/r/DB4PR10MB6261DA9202AF37B4F6ECDD6C9258A@DB4PR10MB6261.EURPRD10.PROD.OUTLOOK.COM
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-17 08:51:23 -07:00
JuenKit Yip
fc669e922e hwmon: (sht3x) remove sht3x_platform_data
Since no in-tree driver supports it, sht3x_platform_data has been
removed and the relevant properties have been moved to sht3x_data.

Signed-off-by: JuenKit Yip <JuenKit_Yip@hotmail.com>
Link: https://lore.kernel.org/r/DB4PR10MB626126FB7226D5AF341197449258A@DB4PR10MB6261.EURPRD10.PROD.OUTLOOK.COM
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-17 08:50:05 -07:00
Prathu Baronia
f99bbb4412 axis-fifo: remove the unnecessary dev_info()
This dev_info() statement is not needed since drivers need to be quiet
under normal operation and its not a good idea to print addresses in
kernel log.

Signed-off-by: Prathu Baronia <prathubaronia2011@gmail.com>
Message-ID: <20230616152602.33232-2-prathubaronia2011@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-17 16:11:01 +02:00
Hui Wang
424a64a2bb
ASoC: bindings: fsl-asoc-card: add compatible string for nau8822 codec
The nau8822 codec is used on an imx6sx EVB.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/Message-Id: <20220616040046.103524-2-hui.wang@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-17 14:13:51 +01:00
Hui Wang
1075df4bde
ASoC: fsl-asoc-card: add nau8822 support
This is for an imx6sx EVB which has a nau8822 codec connects to the
SSI2 interface, so add the nau8822 support in this machine driver.

Because the codec driver nau8822.c doesn't handle mclk enabling, here
adding a codec_priv->mclk for nau8822 and similar codecs which need to
enable the mclk in the machine driver, and enable the mclk in the
card_late_probe() conditionally.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/Message-Id: <20220616040046.103524-1-hui.wang@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-17 14:13:50 +01:00