Commit graph

1,199,813 commits

Author SHA1 Message Date
Naman Jain
158826c73d soc: qcom: socinfo: Add support for new fields in revision 18
Add support for below fields coming in socinfo structure under v18:
* num_kvps: number of key value pairs (KVP)
* kvps_offset: the offset of the KVP table from the base address of
  socinfo structure in SMEM
KVP table has boolean values for certain feature flags, used to determine
hardware configuration.

Signed-off-by: Naman Jain <quic_namajain@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230606134626.18790-2-quic_namajain@quicinc.com
2023-06-13 11:15:41 -07:00
Srinivas Kandagatla
318da4837d arm64: defconfig: Enable sc828x0xp lpasscc clock controller
Enabled sc828x0xp lpasscc clock controller driver required for X13s laptop.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608125315.11454-7-srinivas.kandagatla@linaro.org
2023-06-13 11:14:20 -07:00
Srinivas Kandagatla
c2ef1ec97c clk: qcom: Add lpass audio clock controller driver for SC8280XP
Add support for the lpass audio clock controller found on SC8280XP based
devices. This would allow lpass peripheral loader drivers to control the
clocks and bring the subsystems out of reset.

Currently this patch only supports resets as the Q6DSP is in control of
LPASS IP which manages most of the clocks via Q6PRM service on GPR rpmsg
channel.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608125315.11454-5-srinivas.kandagatla@linaro.org
2023-06-13 11:14:04 -07:00
Srinivas Kandagatla
a5c9c3ba24 clk: qcom: Add lpass clock controller driver for SC8280XP
Add support for the lpass clock controller found on SC8280XP based devices.
This would allow lpass peripheral loader drivers to control the clocks and
bring the subsystems out of reset.

Currently this patch only supports resets as the Q6DSP is in control of
LPASS IP which manages most of the clocks via Q6PRM service on GPR rpmsg
channel.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608125315.11454-4-srinivas.kandagatla@linaro.org
2023-06-13 11:14:04 -07:00
Srinivas Kandagatla
532bbadcb5 arm64: dts: qcom: sc8280xp: add resets for soundwire controllers
Soundwire controllers on sc8280xp needs an explicit reset, add
support for this.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608125315.11454-6-srinivas.kandagatla@linaro.org
2023-06-13 11:13:23 -07:00
Bjorn Andersson
0832b1c9d0 Merge branch '20230608125315.11454-2-srinivas.kandagatla@linaro.org' into arm64-for-6.5
Merge the SC8280XP LPASSCC DeviceTree bindings in order to get access
to the newly added reset defines.
2023-06-13 11:12:02 -07:00
Srinivas Kandagatla
83da70da40 dt-bindings: clock: Add LPASS AUDIOCC and reset controller for SC8280XP
The LPASS (Low Power Audio Subsystem) Audio clock controller provides reset
support when it is under the control of Q6DSP.

Add support for those resets and adds IDs for clients to request the reset.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608125315.11454-3-srinivas.kandagatla@linaro.org
2023-06-13 11:11:27 -07:00
Srinivas Kandagatla
bfc43a9c0c dt-bindings: clock: Add LPASSCC and reset controller for SC8280XP
The LPASS (Low Power Audio Subsystem) clock controller provides reset
support when it is under the control of Q6DSP.

Add support for those resets and adds IDs for clients to request the reset.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608125315.11454-2-srinivas.kandagatla@linaro.org
2023-06-13 11:11:27 -07:00
Krzysztof Kozlowski
3f01d016cf arm64: dts: qcom: sm8550-mtp: add sound card
Add the sound card node with tested playback over WSA8845 speakers and
WCD9385 headset over USB Type-C.  The recording links were not tested,
but should be similar to previous platforms.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612173758.286411-2-krzysztof.kozlowski@linaro.org
2023-06-13 11:09:03 -07:00
Krzysztof Kozlowski
9f5ebcd610 arm64: dts: qcom: sm8550-qrd: add sound card
Add the sound card node with tested playback over WSA8845 speakers and
WCD9385 headset over USB Type-C.  The recording links were not tested,
but should be similar to previous platforms.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612173758.286411-1-krzysztof.kozlowski@linaro.org
2023-06-13 11:09:03 -07:00
Krzysztof Kozlowski
edb92fae57 arm64: dts: qcom: sm8550-mtp: add WSA8845 speakers
Add Qualcomm WSA8845 Soundwire smart speaker amplifiers.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608094323.267278-2-krzysztof.kozlowski@linaro.org
2023-06-13 11:08:42 -07:00
Krzysztof Kozlowski
a2422d5106 arm64: dts: qcom: sm8550-qrd: add WSA8845 speakers
Add Qualcomm WSA8845 Soundwire smart speaker amplifiers.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608094323.267278-1-krzysztof.kozlowski@linaro.org
2023-06-13 11:08:42 -07:00
Rohit Agarwal
9181bb9399 arm64: dts: qcom: Add SDX75 platform and IDP board support
Add basic devicetree support for SDX75 platform and IDP board from
Qualcomm. The SDX75 platform features an ARM Cortex A55 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, UART, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1686311438-24177-6-git-send-email-quic_rohiagar@quicinc.com
2023-06-13 11:06:07 -07:00
Rohit Agarwal
f9a97656ac dt-bindings: arm: qcom: Document SDX75 platform and boards
Document the SDX75 platform binding and also the boards using it.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1686311438-24177-2-git-send-email-quic_rohiagar@quicinc.com
2023-06-13 11:06:07 -07:00
Bjorn Andersson
68017e6b1b Merge branch '20230512122347.1219-3-quic_tdas@quicinc.com' into arm64-for-6.5
Merge the SDX75 GCC DeviceTree binding, in order to get access to the
clock defines in the DeviceTree source.
2023-06-13 11:06:07 -07:00
Neil Armstrong
bb47bfbd5a arm64: dts: qcom: sm8550-qrd: enable PMIC Volume and Power buttons
The Volume Down & Power buttons are controlled by the PMIC via
the PON hardware, and the Volume Up is connected to a PMIC gpio.

Enable the necessary hardware and setup the GPIO state for the
Volume Up gpio key.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-topic-sm8550-upstream-pm8550-lpg-dt-v4-4-a288f24af81b@linaro.org
2023-06-13 11:01:49 -07:00
Neil Armstrong
a791fc1996 arm64: dts: qcom: pmk8550: always enable RTC PMIC device
There's no reason to keep the RTC disabled, it has been tested
and is functional on the SM8550 QRD and MTP boards.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-topic-sm8550-upstream-pm8550-lpg-dt-v4-3-a288f24af81b@linaro.org
2023-06-13 11:01:49 -07:00
Neil Armstrong
3818165476 arm64: dts: qcom: sm8550-qrd: add notification RGB LED
The QRD features a notification LED connected to the pm8550.
Configure the RGB led controlled by the PMIC PWM controller.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-topic-sm8550-upstream-pm8550-lpg-dt-v4-2-a288f24af81b@linaro.org
2023-06-13 11:01:49 -07:00
Neil Armstrong
8889d13c2e arm64: dts: qcom: pm8550: add PWM controller
Add the PWM function to the pm8550 dtsi, this is usually used
to drive RGB leds on platforms using this PMIC.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-topic-sm8550-upstream-pm8550-lpg-dt-v4-1-a288f24af81b@linaro.org
2023-06-13 11:01:49 -07:00
Bjorn Andersson
2d7b1a31ff arm64: dts: qcom: sc8180x: Move DisplayPort for MMCX
The DisplayPort blocks are powered by MMCX and should be described as
such to ensure that power votes are done on the right resource.

This also solves the problem that sync_state is unaware of the DP
controllers needing MMCX to be kept alive during boot. As such this
change also fixes occasionally seen crashes during boot due to
undervoltage of MMCX.

Fixes: 494dec9b6f ("arm64: dts: qcom: sc8180x: Add display and gpu nodes")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612220739.1886155-1-quic_bjorande@quicinc.com
2023-06-13 11:01:49 -07:00
Bjorn Andersson
e537d5ef47 arm64: dts: qcom: sc8180x: Fix adreno smmu compatible
The adreno smmu should be compatible with qcom,adreno-smmu as well for
per-process page tables to work.

Fixes: 8575f197b0 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612220532.1884860-1-quic_bjorande@quicinc.com
2023-06-13 11:01:49 -07:00
Bjorn Andersson
a277430b38 arm64: dts: qcom: sc8180x-primus: dispcc is already okay
&dispcc status was changed to okay by default in the platform, no need
to do it again in the board.

Fixes: 2ce38cc1e8 ("arm64: dts: qcom: sc8180x: Introduce Primus")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612220420.1884631-1-quic_bjorande@quicinc.com
2023-06-13 11:01:49 -07:00
Neil Armstrong
66adfbc4d3 arm64: dts: qcom: sm8550: add display port nodes
Add the Display Port controller subnode to the MDSS node.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230601-topic-sm8550-upstream-dp-v4-2-ac2c6899d22c@linaro.org
2023-06-13 11:01:49 -07:00
Neil Armstrong
bbde65f9da arm64: dts: qcom: sm8550: fix low_svs RPMhPD labels
"low" was written "lov", fix this.

Fixes: 99d33ee61c ("arm64: dts: qcom: sm8550: Add missing RPMhPD OPP levels")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230601-topic-sm8550-upstream-dp-v4-1-ac2c6899d22c@linaro.org
2023-06-13 11:01:49 -07:00
Andrew Halaney
f04325e4d4 arm64: dts: qcom: sa8540p-ride: Specify ethernet phy OUI
With wider usage on more boards, there have been reports of the
following:

    [  315.016174] qcom-ethqos 20000.ethernet eth0: no phy at addr -1
    [  315.016179] qcom-ethqos 20000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -19)

which has been fairly random and isolated to specific boards.
Early reports were written off as a hardware issue, but it has been
prevalent enough on boards that theory seems unlikely.

In bring up of a newer piece of hardware, similar was seen, but this
time _consistently_. Moving the reset to the mdio bus level (which isn't
exactly a lie, it is the only device on the bus so one could model it as
such) fixed things on that platform. Analysis on sa8540p-ride shows that
the phy's reset is not being handled during the OUI scan if the reset
lives in the phy node:

    # gpio 752 is the reset, and is active low, first mdio reads are the OUI
    modprobe-420     [006] .....   154.738544: mdio_access: stmmac-0 read  phy:0x08 reg:0x02 val:0x0141
    modprobe-420     [007] .....   154.738665: mdio_access: stmmac-0 read  phy:0x08 reg:0x03 val:0x0dd4
    modprobe-420     [004] .....   154.741357: gpio_value: 752 set 1
    modprobe-420     [004] .....   154.741358: gpio_direction: 752 out (0)
    modprobe-420     [004] .....   154.741360: gpio_value: 752 set 0
    modprobe-420     [006] .....   154.762751: gpio_value: 752 set 1
    modprobe-420     [007] .....   154.846857: gpio_value: 752 set 1
    modprobe-420     [004] .....   154.937824: mdio_access: stmmac-0 write phy:0x08 reg:0x0d val:0x0003
    modprobe-420     [004] .....   154.937932: mdio_access: stmmac-0 write phy:0x08 reg:0x0e val:0x0014

Moving it to the bus level, or specifying the OUI in the phy's
compatible ensures the reset is handled before any mdio access
Here is tracing with the OUI approach (which skips scanning the OUI):

    modprobe-549     [007] .....    63.860295: gpio_value: 752 set 1
    modprobe-549     [007] .....    63.860297: gpio_direction: 752 out (0)
    modprobe-549     [007] .....    63.860299: gpio_value: 752 set 0
    modprobe-549     [004] .....    63.882599: gpio_value: 752 set 1
    modprobe-549     [005] .....    63.962132: gpio_value: 752 set 1
    modprobe-549     [006] .....    64.049379: mdio_access: stmmac-0 write phy:0x08 reg:0x0d val:0x0003
    modprobe-549     [006] .....    64.049490: mdio_access: stmmac-0 write phy:0x08 reg:0x0e val:0x0014

The OUI approach is taken given the description matches the situation
perfectly (taken from ethernet-phy.yaml):

    - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
      description:
        If the PHY reports an incorrect ID (or none at all) then the
        compatible list may contain an entry with the correct PHY ID
        in the above form.
        The first group of digits is the 16 bit Phy Identifier 1
        register, this is the chip vendor OUI bits 3:18. The
        second group of digits is the Phy Identifier 2 register,
        this is the chip vendor OUI bits 19:24, followed by 10
        bits of a vendor specific ID.

With this in place the sa8540p-ride's phy is probing consistently, so
it seems the floating reset during mdio access was the issue. In either
case, it shouldn't be floating so this improves the situation. The below
link discusses some of the relationship of mdio, its phys, and points to
this OUI compatible as a way to opt out of the OUI scan pre-reset
handling which influenced this decision.

Link: https://lore.kernel.org/all/dca54c57-a3bd-1147-63b2-4631194963f0@gmail.com/
Fixes: 57827e87be ("arm64: dts: qcom: sa8540p-ride: Add ethernet nodes")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608201513.882950-1-ahalaney@redhat.com
2023-06-13 11:01:49 -07:00
Su Hui
95011f267c drm/bridge: ti-sn65dsi86: Avoid possible buffer overflow
Smatch error:buffer overflow 'ti_sn_bridge_refclk_lut' 5 <= 5.

Fixes: cea86c5bb4 ("drm/bridge: ti-sn65dsi86: Implement the pwm_chip")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230608012443.839372-1-suhui@nfschina.com
2023-06-13 11:00:56 -07:00
Rohit Agarwal
677b9e85e8 dt-bindings: firmware: scm: Add compatible for SDX75
Add devicetree compatible for SCM present in SDX75 platform.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1686311438-24177-3-git-send-email-quic_rohiagar@quicinc.com
2023-06-13 10:58:39 -07:00
Linus Torvalds
15adb51c04 Devicetree fixes for v6.4, part 3:
- Fix missing of_node_put() in init_overlay_changeset()
 
 - Fix schema for qcom,pmic-mpp "qcom,paired" property
 
 - Fix 'additionalProperties' in silvaco,i3c-master binding
 
 - usage-model.rst: Use documented "arm,primecell" compatible string
 
 - Update Damien Le Moal's email address
 
 - Fixes in Realtek Bluetooth binding
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmSIh9YACgkQ+vtdtY28
 YcNvXg/9E92dDOCaxMAIjse9SghSQymtIeFu24a52fbsimoR7pq6RhbhxwAfmVNk
 eh1nScVvRrjMdsc2nTiWaa3UTsTiiSGOCL6J8Lj1vJiApOmyj9a5h8Vpv4EOIHbf
 hxGWdEIXfO7c3cnUvbNu89n9gfpHDSKAYNVH5mkB9F1t/e/BOa0tZDLDT7OwF91u
 taeBdJvTHRHPqtoV5KlCVoCR1VYUd5uzBSpFAC7mJ9JzDLygmo2apB4RT0FdnBaA
 92Xxjub474tMxwWycbfSqesrNIP6tDUTqw6dIYJ29J3WaRagUCO2tr1qGqP4o8Sz
 5hOE5ZosHl7OVYx0XpLKOrna3RgKwvY9nEBSu3rQeEnX4lVFQbS+dzRC2dJry3qc
 mwOHlohUs3BDLza7DB+B2AooM8a7engLcloN1pBe3/jOQpVPkRXeLA+WnX0+BJ+r
 fODlMQcg3ismawkKbn+bkB6ygnTnmNqNYGUsGwl2CFiwMrKLHTJ9PJs3nFb65KQM
 /THXlmWCvxudEmbCh6c/PKFdUOS0LKt2TqBemOzgH5B2JuU8SkQsZcpW5AXg5vvE
 YQdRtNS79ZQeFeOB/NKSS23JTyJxV4zHP2lCCqxWNkDeXjHM5duihOiycul1mG7R
 nGo0Cn6dBzb5X6cBCwMeHQRNDeFBjLKx4Mn/u5w+b6JfwTXcKQA=
 =jy6F
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-fixes-for-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:

 - Fix missing of_node_put() in init_overlay_changeset()

 - Fix schema for qcom,pmic-mpp "qcom,paired" property

 - Fix 'additionalProperties' in silvaco,i3c-master binding

 - usage-model.rst: Use documented "arm,primecell" compatible string

 - Update Damien Le Moal's email address

 - Fixes in Realtek Bluetooth binding

* tag 'devicetree-fixes-for-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: pinctrl: qcom,pmic-mpp: Fix schema for "qcom,paired"
  dt-bindings: i3c: silvaco,i3c-master: fix missing schema restriction
  of: overlay: Fix missing of_node_put() in error case of init_overlay_changeset()
  docs: zh_CN/devicetree: sync usage-model fix
  docs: dt: fix documented Primecell compatible string
  dt-bindings: Change Damien Le Moal's contact email
  dt-bindings: net: realtek-bluetooth: Fix double RTL8723CS in desc
  dt-bindings: net: realtek-bluetooth: Fix RTL8821CS binding
2023-06-13 10:27:56 -07:00
Bjorn Andersson
0d25da8e7e soc: qcom: mdt_loader: Fix split image detection
The enhanced detection introduced in commit '210d12c819 ("soc: qcom:
mdt_loader: Enhance split binary detection")' requires that all segments
lies within the file on disk.

But the Qualcomm firmware files consistently has a BSS-like segment at
the end, with a p_offset aligned to the next 4k boundary. As the p_size
is 0 and there's nothing to load, the image is not padded to cover this
(empty) segment.

Ignore zero-sized segments when determining if the image is split, to
avoid this problem.

Fixes: 210d12c819 ("soc: qcom: mdt_loader: Enhance split binary detection")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # qrb5165-rb5
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612215804.1883458-1-quic_bjorande@quicinc.com
2023-06-13 10:13:01 -07:00
Luca Weiss
3f502e372b ARM: dts: qcom: msm8226: Provide clocks to mmcc node
The mmcc needs several clocks that are being used as parents. Provide
them in dt.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230509-msm8226-mmcc-parents-v1-3-83a2dfc986ab@z3ntu.xyz
2023-06-13 10:03:09 -07:00
Luca Weiss
e280427384 ARM: dts: qcom: msm8226: Use XO from rpmcc where possible
The xo clock being used everywhere actually goes via the RPM. Since the
rpmcc driver recently got support for this clock we can use this now.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230509-msm8226-mmcc-parents-v1-1-83a2dfc986ab@z3ntu.xyz
2023-06-13 10:03:09 -07:00
Luca Weiss
5683f11aa1 dt-bindings: clock: qcom,mmcc: define clocks/clock-names for MSM8226
Define clock/clock-names properties of the MMCC device node to be used
on MSM8226 platform.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230509-msm8226-mmcc-parents-v1-2-83a2dfc986ab@z3ntu.xyz
2023-06-13 10:02:57 -07:00
Mark Brown
a11e6515b0
ASoC: add new trigger ordering method
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:

This patch-set adds new "trigger" starting/stopping method.
2023-06-13 17:39:51 +01:00
Sean Christopherson
106ed2cad9 KVM: SVM: WARN, but continue, if misc_cg_set_capacity() fails
WARN and continue if misc_cg_set_capacity() fails, as the only scenario
in which it can fail is if the specified resource is invalid, which should
never happen when CONFIG_KVM_AMD_SEV=y.  Deliberately not bailing "fixes"
a theoretical bug where KVM would leak the ASID bitmaps on failure, which
again can't happen.

If the impossible should happen, the end result is effectively the same
with respect to SEV and SEV-ES (they are unusable), while continuing on
has the advantage of letting KVM load, i.e. userspace can still run
non-SEV guests.

Reported-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Link: https://lore.kernel.org/r/20230607004449.1421131-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-06-13 09:20:26 -07:00
Mark Brown
e8181a895b
ASoC: add N cpus to M codecs dai link support
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:

Currently, ASoC supports dailinks with the following mappings:
1 cpu DAI to N codec DAIs
N cpu DAIs to N codec DAIs
But the mapping between N cpu DAIs and M codec DAIs is not supported.
The reason is that we didn't have a mechanism to map cpu and codec DAIs

This series suggests a new snd_soc_dai_link_codec_ch_map struct in
struct snd_soc_dai_link{} which provides codec DAI to cpu DAI mapping
information used to implement N cpu DAIs to M codec DAIs support.

And add the codec_ch_maps to SOF SoundWire machine driver.
2023-06-13 17:16:51 +01:00
Mark Brown
1012bfdd2f
ASoC: Use maple tree for Cirrus Logic devices
Merge series from Mark Brown <broonie@kernel.org>:

A lot of the Cirrus Logic devices only support single register
read/write operations so they get no benefit from using the rbtree cache
over the more modern maple tree cache, convert them to use maple tree.
2023-06-13 17:16:44 +01:00
Sean Christopherson
0b210faf33 KVM: x86/mmu: Add "never" option to allow sticky disabling of nx_huge_pages
Add a "never" option to the nx_huge_pages module param to allow userspace
to do a one-way hard disabling of the mitigation, and don't create the
per-VM recovery threads when the mitigation is hard disabled.  Letting
userspace pinky swear that userspace doesn't want to enable NX mitigation
(without reloading KVM) allows certain use cases to avoid the latency
problems associated with spawning a kthread for each VM.

E.g. in FaaS use cases, the guest kernel is trusted and the host may
create 100+ VMs per logical CPU, which can result in 100ms+ latencies when
a burst of VMs is created.

Reported-by: Li RongQing <lirongqing@baidu.com>
Closes: https://lore.kernel.org/all/1679555884-32544-1-git-send-email-lirongqing@baidu.com
Cc: Yong He <zhuangel570@gmail.com>
Cc: Robert Hoo <robert.hoo.linux@gmail.com>
Cc: Kai Huang <kai.huang@intel.com>
Reviewed-by: Robert Hoo <robert.hoo.linux@gmail.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Tested-by: Luiz Capitulino <luizcap@amazon.com>
Reviewed-by: Li RongQing <lirongqing@baidu.com>
Link: https://lore.kernel.org/r/20230602005859.784190-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-06-13 09:16:03 -07:00
Sean Christopherson
a306425708 KVM: x86: Update comments about MSR lists exposed to userspace
Refresh comments about msrs_to_save, emulated_msrs, and msr_based_features
to remove stale references left behind by commit 2374b7310b (KVM:
x86/pmu: Use separate array for defining "PMU MSRs to save"), and to
better reflect the current reality, e.g. emulated_msrs is no longer just
for MSRs that are "kvm-specific".

Reported-by: Binbin Wu <binbin.wu@linux.intel.com>
Link: https://lore.kernel.org/r/20230607004636.1421424-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-06-13 09:09:07 -07:00
Baoquan He
389ce21b62 arm64: add kdump.rst into index.rst
Document kdump.rst was added into Documentation/arm64/, but not listed
in Documentation/arm64/index.rst. That triggers below warning when
executing "make htmldoc":

>> Documentation/arm64/kdump.rst: WARNING: document isn't included in any toctree

Fix it now.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306110549.ynH2Juok-lkp@intel.com/
Signed-off-by: Baoquan He <bhe@redhat.com>
Fixes: 03dc0e0540 ("Documentation: add kdump.rst to present crashkernel reservation on arm64")
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20230611230358.13635-1-bhe@redhat.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-06-13 17:03:09 +01:00
Srinivas Pandruvada
ea197ea2ba thermal: intel: int340x_thermal: New IOCTLs for Passive v2 table
Export Passive version 2 table similar to the way _TRT and _ART tables
via IOCTLs.

This removes need for binary utility to read ACPI Passive 2 table by
providing open source support. This table already has open source
implementation in the user space thermald, when the table is part of
data vault exported by the int3400 sysfs.

This table is supported in some older platforms before Ice Lake
generation.

Passive 2 tables contain multiple entries. Each entry has following
fields:

 * Source: Named Reference (String). This is the source device for
   temperature.
 * Target: Named Reference (String). This is the target device to
   control.
 * Priority: Priority of this device compared to others.
 * SamplingPeriod: Time Period in 1/10 of seconds unit.
 * PassiveTemp: Passive Temperature in 1/10 of Kelvin.
 * SourceDomain: Domain for the source (00:Processor, others reserved).
 * ControlKnob: Type of control knob (00:Power Limit 1, others: reserved)
 * Limit: The target state to set on reaching passive temperature.
   This can be a string "max", "min" or a power limit value.
 * LimitStepSize: Step size during activation.
 * UnLimitStepSize: Step size during deactivation.
 * Reserved1: Reserved

Three IOCTLs are added similar to IOCTLs for reading TRT:

ACPI_THERMAL_GET_PSVT_COUNT: Number of passive 2 entries.
ACPI_THERMAL_GET_PSVT_LEN: Total return data size (count x each
  passive 2 entry size).
ACPI_THERMAL_GET_PSVT: Get the data as an array of objects with
  passive 2 entries.

This change is based on original development done by:
Todd Brandt <todd.e.brandt@linux.intel.com>

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Changelog and subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-06-13 17:57:39 +02:00
Long Li
c3b880acad xfs: fix ag count overflow during growfs
I found a corruption during growfs:

 XFS (loop0): Internal error agbno >= mp->m_sb.sb_agblocks at line 3661 of
   file fs/xfs/libxfs/xfs_alloc.c.  Caller __xfs_free_extent+0x28e/0x3c0
 CPU: 0 PID: 573 Comm: xfs_growfs Not tainted 6.3.0-rc7-next-20230420-00001-gda8c95746257
 Call Trace:
  <TASK>
  dump_stack_lvl+0x50/0x70
  xfs_corruption_error+0x134/0x150
  __xfs_free_extent+0x2c1/0x3c0
  xfs_ag_extend_space+0x291/0x3e0
  xfs_growfs_data+0xd72/0xe90
  xfs_file_ioctl+0x5f9/0x14a0
  __x64_sys_ioctl+0x13e/0x1c0
  do_syscall_64+0x39/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
 XFS (loop0): Corruption detected. Unmount and run xfs_repair
 XFS (loop0): Internal error xfs_trans_cancel at line 1097 of file
   fs/xfs/xfs_trans.c.  Caller xfs_growfs_data+0x691/0xe90
 CPU: 0 PID: 573 Comm: xfs_growfs Not tainted 6.3.0-rc7-next-20230420-00001-gda8c95746257
 Call Trace:
  <TASK>
  dump_stack_lvl+0x50/0x70
  xfs_error_report+0x93/0xc0
  xfs_trans_cancel+0x2c0/0x350
  xfs_growfs_data+0x691/0xe90
  xfs_file_ioctl+0x5f9/0x14a0
  __x64_sys_ioctl+0x13e/0x1c0
  do_syscall_64+0x39/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
 RIP: 0033:0x7f2d86706577

The bug can be reproduced with the following sequence:

 # truncate -s  1073741824 xfs_test.img
 # mkfs.xfs -f -b size=1024 -d agcount=4 xfs_test.img
 # truncate -s 2305843009213693952  xfs_test.img
 # mount -o loop xfs_test.img /mnt/test
 # xfs_growfs -D  1125899907891200  /mnt/test

The root cause is that during growfs, user space passed in a large value
of newblcoks to xfs_growfs_data_private(), due to current sb_agblocks is
too small, new AG count will exceed UINT_MAX. Because of AG number type
is unsigned int and it would overflow, that caused nagcount much smaller
than the actual value. During AG extent space, delta blocks in
xfs_resizefs_init_new_ags() will much larger than the actual value due to
incorrect nagcount, even exceed UINT_MAX. This will cause corruption and
be detected in __xfs_free_extent. Fix it by growing the filesystem to up
to the maximally allowed AGs and not return EINVAL when new AG count
overflow.

Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2023-06-13 08:49:20 -07:00
Christoph Hellwig
3dbd53c7be swim3: fix the floppy_locked_ioctl prototype
Add back the accidentally dropped mode parameter.

Fixes: b60f7635788a ("swim3: fix the floppy_locked_ioctl prototype")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230613154309.327557-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-13 09:45:40 -06:00
Leonard Göhrs
ae128bb36d dt-bindings: gpio: pca9570: add gpio-line-names property
This patch allows giving each of the controller's pins a meaningful
name.

Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-06-13 16:54:14 +02:00
Andreas Gruenbacher
cea44032bc gfs2: retry interrupted internal reads
The iomap-based read operations done by gfs2 for its system files, such
as rindex, may sometimes be interrupted and return -EINTR.   This
confuses some users of gfs2_internal_read().  Fix that by retrying
interrupted reads.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-06-13 16:51:25 +02:00
Andy Shevchenko
7d0b80647f gpiolib: remove unused gpio_cansleep()
There is not a single user in the entire kernel of this deprecated API,
kill it for good.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-06-13 16:49:23 +02:00
Jiasheng Jiang
c1bcb976d8 gpio: sifive: add missing check for platform_get_irq
Add the missing check for platform_get_irq() and return error code
if it fails.

The returned error code will be dealed with in
builtin_platform_driver(sifive_gpio_driver) and the driver will not
be registered.

Fixes: f52d6d8b43 ("gpio: sifive: To get gpio irq offset from device tree data")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-06-13 16:22:16 +02:00
Jakob Koschel
1e327963cf x86/sgx: Avoid using iterator after loop in sgx_mmu_notifier_release()
If &encl_mm->encl->mm_list does not contain the searched 'encl_mm',
'tmp' will not point to a valid sgx_encl_mm struct.

Linus proposed to avoid any use of the list iterator variable after the
loop, in the attempt to move the list iterator variable declaration into
the macro to avoid any potential misuse after the loop. Using it in
a pointer comparison after the loop is undefined behavior and should be
omitted if possible, see Link tag.

Instead, just use a 'found' boolean to indicate if an element was found.

  [ bp: Massage, fix typos. ]

Signed-off-by: Jakob Koschel <jkl820.git@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/
Link: https://lore.kernel.org/r/20230206-sgx-use-after-iter-v2-1-736ca621adc3@gmail.com
2023-06-13 16:21:01 +02:00
Christophe Kerello
47b3ad6b78 mmc: mmci: stm32: fix max busy timeout calculation
The way that the timeout is currently calculated could lead to a u64
timeout value in mmci_start_command(). This value is then cast in a u32
register that leads to mmc erase failed issue with some SD cards.

Fixes: 8266c585f4 ("mmc: mmci: add hardware busy timeout feature")
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230613134146.418016-1-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-13 16:19:50 +02:00
Dennis Zhou
2cc83bf7d4 mmc: core: Allow mmc_start_host() synchronously detect a card
When using dm-verity with a data partition on an emmc device, dm-verity
races with the initialization of the (e)MMC/SD cards. This is because the
card detection procedure is being managed from a workqueue, rather than
synchronously from the mmc host's ->probe() routine.

To allow the card detect to be synchronous, let's simply skip using the
workqueue at the first initialization attempt from mmc_start_host().

Signed-off-by: Dennis Zhou <dennis@kernel.org>
Link: https://lore.kernel.org/r/ZCTOMVjW+pnZVGsQ@snowbird
[Ulf: Re-wrote the commit message to clarify the change]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-13 16:08:16 +02:00
Ulf Hansson
3108eb2e8a mmc: mmci: Set PROBE_PREFER_ASYNCHRONOUS
All mmc host drivers should have the asynchronous probe option enabled, but
it seems like we failed to set it for mmci, so let's do that now.

Fixes: 21b2cec61c ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Yann Gautier <yann.gautier@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230612143730.210390-1-ulf.hansson@linaro.org
2023-06-13 16:06:48 +02:00