Commit graph

505,617 commits

Author SHA1 Message Date
Herbert Xu
0c828f2f83 lib: rhashtable - Remove weird non-ASCII characters from comments
My editor spewed garbage that looked like memory corruption on
my screen.  It turns out that a number of occurences of "fi" got
turned into a ligature.

This patch replaces these ligatures with the ASCII letters "fi".

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Cheers,
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-13 14:38:46 -05:00
Alexander Kochetkov
6ff53fd371 net/smsc911x: Fix delays in the PHY enable/disable routines
Increased delay in the smsc911x_phy_disable_energy_detect (from 1ms to 2ms).
Dropped delays in the smsc911x_phy_enable_energy_detect (100ms and 1ms).

The patch affect SMSC LAN generation 4 chips with integrated PHY (LAN9221).

I saw problems with soft reset due to wrong udelay timings.
After I fixed udelay, I measured the time needed to bring integrated PHY
from power-down to operational mode (the time beetween clearing EDPWRDOWN
bit and soft reset complete event). I got 1ms (measured using ktime_get).
The value is equal to the current value (1ms) used in the
smsc911x_phy_disable_energy_detect. It is near the upper bound and in order
to avoid rare soft reset faults it is doubled (2ms).

I don't know official timing for bringing up integrated PHY as specs doesn't
clarify this (or may be I didn't found).

It looks safe to drop delays before and after setting EDPWRDOWN bit
(enable PHY power-down mode). I didn't saw any regressions with the patch.

The patch was reviewed by Steve Glendinning and Microchip Team.

Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Acked-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-13 14:37:53 -05:00
Alexander Kochetkov
242bcd5ba1 net/smsc911x: Fix rare soft reset timeout issue due to PHY power-down mode
The patch affect SMSC LAN generation 4 chips with integrated PHY (LAN9221).

It is possible that PHY could enter power-down mode (ENERGYON clear),
between ENERGYON bit check in smsc911x_phy_disable_energy_detect and SRST
bit set in smsc911x_soft_reset. This could happen, for example, if someone
disconnect ethernet cable between the checks. The PHY in a power-down mode
would prevent the MAC portion of chip to be software reseted.

Initially found by code review, confirmed later using test case.

This is low probability issue, and in order to reproduce it you have to
run the script:

while true; do
	ifconfig eth0 down
	ifconfig eth0 up || break
done

While the script is running you have to plug/unplug ethernet cable many
times (using gpio controlled ethernet switch, for example) until get:

[ 4516.477783] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4516.512207] smsc911x smsc911x.0: eth0: SMSC911x/921x identified at 0xce006000, IRQ: 336
[ 4516.524658] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4516.559082] smsc911x smsc911x.0: eth0: SMSC911x/921x identified at 0xce006000, IRQ: 336
[ 4516.571990] ADDRCONF(NETDEV_UP): eth0: link is not ready
ifconfig: SIOCSIFFLAGS: Input/output error

The patch was reviewed by Steve Glendinning and Microchip Team.

Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Acked-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-13 14:37:53 -05:00
Anish Bhatt
d7990b0c34 cxgb4i/cxgb4 : Refactor macros to conform to uniform standards
Refactored all macros used in cxgb4i as part of previously started cxgb4 macro
names cleanup. Makes them more uniform and avoids namespace collision.
Minor changes in other drivers where required as some of these macros are used
 by multiple drivers, affected drivers are iw_cxgb4, cxgb4(vf) & csiostor

Signed-off-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-13 14:36:22 -05:00
Jason Wang
8c847d2541 tun: fix issues of iovec iterators using in tun_put_user()
This patch fixes two issues after using iovec iterators:
- vlan_offset should be initialized to zero, otherwise unexpected offset
  will be used in skb_copy_datagram_iter()
- advance iovec iterator when vnet_hdr_sz is greater than sizeof(gso), this
  is the case when mergeable rx buffer were enabled for a virt guest.

Fixes e0b46d0ee9 ("tun: Use iovec iterators")
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-13 14:33:22 -05:00
Thomas Graf
882288c05e FOU: Fix no return statement warning for !CONFIG_NET_FOU_IP_TUNNELS
net/ipv4/fou.c: In function ‘ip_tunnel_encap_del_fou_ops’:
net/ipv4/fou.c:861:1: warning: no return statement in function returning non-void [-Wreturn-type]

Fixes: a8c5f90fb5 ("ip_tunnel: Ops registration for secondary encap (fou, gue)")
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-13 14:32:00 -05:00
Ilya Dryomov
cc9f1f518c libceph: change from BUG to WARN for __remove_osd() asserts
No reason to use BUG_ON for osd request list assertions.

Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-11-13 22:26:34 +03:00
Ilya Dryomov
ba9d114ec5 libceph: clear r_req_lru_item in __unregister_linger_request()
kick_requests() can put linger requests on the notarget list.  This
means we need to clear the much-overloaded req->r_req_lru_item in
__unregister_linger_request() as well, or we get an assertion failure
in ceph_osdc_release_request() - !list_empty(&req->r_req_lru_item).

AFAICT the assumption was that registered linger requests cannot be on
any of req->r_req_lru_item lists, but that's clearly not the case.

Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-11-13 22:21:14 +03:00
Ilya Dryomov
a390de0208 libceph: unlink from o_linger_requests when clearing r_osd
Requests have to be unlinked from both osd->o_requests (normal
requests) and osd->o_linger_requests (linger requests) lists when
clearing req->r_osd.  Otherwise __unregister_linger_request() gets
confused and we trip over a !list_empty(&osd->o_linger_requests)
assert in __remove_osd().

MON=1 OSD=1:

    # cat remove-osd.sh
    #!/bin/bash
    rbd create --size 1 test
    DEV=$(rbd map test)
    ceph osd out 0
    sleep 3
    rbd map dne/dne # obtain a new osdmap as a side effect
    rbd unmap $DEV & # will block
    sleep 3
    ceph osd in 0

Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-11-13 22:21:13 +03:00
Ilya Dryomov
aaef31703a libceph: do not crash on large auth tickets
Large (greater than 32k, the value of PAGE_ALLOC_COSTLY_ORDER) auth
tickets will have their buffers vmalloc'ed, which leads to the
following crash in crypto:

[   28.685082] BUG: unable to handle kernel paging request at ffffeb04000032c0
[   28.686032] IP: [<ffffffff81392b42>] scatterwalk_pagedone+0x22/0x80
[   28.686032] PGD 0
[   28.688088] Oops: 0000 [#1] PREEMPT SMP
[   28.688088] Modules linked in:
[   28.688088] CPU: 0 PID: 878 Comm: kworker/0:2 Not tainted 3.17.0-vm+ #305
[   28.688088] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
[   28.688088] Workqueue: ceph-msgr con_work
[   28.688088] task: ffff88011a7f9030 ti: ffff8800d903c000 task.ti: ffff8800d903c000
[   28.688088] RIP: 0010:[<ffffffff81392b42>]  [<ffffffff81392b42>] scatterwalk_pagedone+0x22/0x80
[   28.688088] RSP: 0018:ffff8800d903f688  EFLAGS: 00010286
[   28.688088] RAX: ffffeb04000032c0 RBX: ffff8800d903f718 RCX: ffffeb04000032c0
[   28.688088] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8800d903f750
[   28.688088] RBP: ffff8800d903f688 R08: 00000000000007de R09: ffff8800d903f880
[   28.688088] R10: 18df467c72d6257b R11: 0000000000000000 R12: 0000000000000010
[   28.688088] R13: ffff8800d903f750 R14: ffff8800d903f8a0 R15: 0000000000000000
[   28.688088] FS:  00007f50a41c7700(0000) GS:ffff88011fc00000(0000) knlGS:0000000000000000
[   28.688088] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[   28.688088] CR2: ffffeb04000032c0 CR3: 00000000da3f3000 CR4: 00000000000006b0
[   28.688088] Stack:
[   28.688088]  ffff8800d903f698 ffffffff81392ca8 ffff8800d903f6e8 ffffffff81395d32
[   28.688088]  ffff8800dac96000 ffff880000000000 ffff8800d903f980 ffff880119b7e020
[   28.688088]  ffff880119b7e010 0000000000000000 0000000000000010 0000000000000010
[   28.688088] Call Trace:
[   28.688088]  [<ffffffff81392ca8>] scatterwalk_done+0x38/0x40
[   28.688088]  [<ffffffff81392ca8>] scatterwalk_done+0x38/0x40
[   28.688088]  [<ffffffff81395d32>] blkcipher_walk_done+0x182/0x220
[   28.688088]  [<ffffffff813990bf>] crypto_cbc_encrypt+0x15f/0x180
[   28.688088]  [<ffffffff81399780>] ? crypto_aes_set_key+0x30/0x30
[   28.688088]  [<ffffffff8156c40c>] ceph_aes_encrypt2+0x29c/0x2e0
[   28.688088]  [<ffffffff8156d2a3>] ceph_encrypt2+0x93/0xb0
[   28.688088]  [<ffffffff8156d7da>] ceph_x_encrypt+0x4a/0x60
[   28.688088]  [<ffffffff8155b39d>] ? ceph_buffer_new+0x5d/0xf0
[   28.688088]  [<ffffffff8156e837>] ceph_x_build_authorizer.isra.6+0x297/0x360
[   28.688088]  [<ffffffff8112089b>] ? kmem_cache_alloc_trace+0x11b/0x1c0
[   28.688088]  [<ffffffff8156b496>] ? ceph_auth_create_authorizer+0x36/0x80
[   28.688088]  [<ffffffff8156ed83>] ceph_x_create_authorizer+0x63/0xd0
[   28.688088]  [<ffffffff8156b4b4>] ceph_auth_create_authorizer+0x54/0x80
[   28.688088]  [<ffffffff8155f7c0>] get_authorizer+0x80/0xd0
[   28.688088]  [<ffffffff81555a8b>] prepare_write_connect+0x18b/0x2b0
[   28.688088]  [<ffffffff81559289>] try_read+0x1e59/0x1f10

This is because we set up crypto scatterlists as if all buffers were
kmalloc'ed.  Fix it.

Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2014-11-13 22:21:12 +03:00
Yan, Zheng
3231300bb9 ceph: fix flush tid comparision
TID of cap flush ack is 64 bits, but ceph_inode_info::flushing_cap_tid
is only 16 bits. 16 bits should be plenty to let the cap flush updates
pipeline appropriately, but we need to cast in the proper direction when
comparing these differently-sized versions. So downcast the 64-bits one
to 16 bits.

Reflects ceph.git commit a5184cf46a6e867287e24aeb731634828467cd98.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@redhat.com>
2014-11-13 22:19:05 +03:00
Greg Kroah-Hartman
2aea83a484 usb: fixes for v3.18-rc5
Just one fix here on dwc3 which fixes a minor
 bug caused by a fix that went in this v3.18-rc
 cycle.
 
 The corner case is minimal as it can only be
 reproduced with back-to-back Setup transfers
 (without starting data or status phase) by
 means of a LeCroy USB Trainer, where we can
 generate USB packets any way we like.
 
 Signed-off-by: Felipe Balbi <balbi@ti.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUYSRhAAoJEIaOsuA1yqREoUYP/iH5WxjwRXPS3z78uJTlKr2g
 Q6vA4hCH4YBHaUsMgT8/mvdeviwZl+Exbj1xQzdwKA0t156I7/MfcVKVVHt7wTUo
 JE69S/R6PZIHgIqFA3NxgNh9SlEw3e5TAGYXxNVouUXkXw5zTKhyBOHHuk/rztfD
 ZKgApyWZfS4VdOG2us6A8xyak/wYcmrdPPba9Cx4PMTen9hbOYngXR+dzOLHO+ox
 StLdVJuDdTgjKS4Wwy3C6agNtnPJsW/KeDcD2YbEfvlnJ/wjtAECAF8BbOpB+5M/
 frCu42NgLIW84t20WY3GCgFPCO5SuqD/L0/PL5SO6xzrZKilPjvha26cRzx5n6zo
 SCJ3t/oeR1EyFs2GmYwYzNdugEKwrkD1dZuqGzoIbYUikPT8BGoB/KHa71Lp4RiS
 bmiwet/Dtcr/Od/mewtTeuhtV480XsCfP9HppdlHyAQB24sifRXZrVYLJDKkOx77
 FTmlW6u6w8/+pFsDBXf6lkh4xt40eTHNSZwDsrC9N+FY4SjiMejMm41SDHSADyls
 EMhKfWXXHs0Ttd8do2LymZDMEYi7Ws/miQIa6qdQ5LeRy5bp/qX4R/yE1t1fYmVR
 NwdpzyyqUWKEg+3p/73CUSO6Cqq9xYRbG+FmeDhDBjL/PacO7NQ17teqaO7QeKo3
 7p3itRqP5pSJ9ZKQWKCJ
 =Azrh
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-v3.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

Felipe writes:

usb: fixes for v3.18-rc5

Just one fix here on dwc3 which fixes a minor
bug caused by a fix that went in this v3.18-rc
cycle.

The corner case is minimal as it can only be
reproduced with back-to-back Setup transfers
(without starting data or status phase) by
means of a LeCroy USB Trainer, where we can
generate USB packets any way we like.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-13 11:12:56 -08:00
Thierry Reding
6b1c4d7674 PCI: tegra: Add Kconfig help text
Add a standard help text to the Kconfig entry for the Tegra PCIe host
controller driver.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-11-13 12:03:57 -07:00
Thierry Reding
4407308b73 PCI: tegra: Do not build on 64-bit ARM
32-bit and 64-bit ARM use very different infrastructure to register a PCI
host bridge.  The Tegra PCIe host controller driver currently only supports
the 32-bit ARM infrastructure, so prevent it from being built on 64-bit ARM
where it will break.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-11-13 12:03:28 -07:00
Paul E. McKenney
9ea6c58856 Merge branches 'torture.2014.11.03a', 'cpu.2014.11.03a', 'doc.2014.11.13a', 'fixes.2014.11.13a', 'signal.2014.10.29a' and 'rt.2014.10.29a' into HEAD
cpu.2014.11.03a: Changes for per-CPU variables.
doc.2014.11.13a: Documentation updates.
fixes.2014.11.13a: Miscellaneous fixes.
signal.2014.10.29a: Signal changes.
rt.2014.10.29a: Real-time changes.
torture.2014.11.03a: torture-test changes.
2014-11-13 10:39:04 -08:00
Paul E. McKenney
60ced4950c rcu: Fix FIXME in rcu_tasks_kthread()
This commit affines rcu_tasks_kthread() to the housekeeping CPUs
in CONFIG_NO_HZ_FULL builds.  This is just a default, so systems
administrators are free to put this kthread somewhere else if they wish.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-11-13 10:35:41 -08:00
Oleg Nesterov
ce36f2f3eb rcu: More info about potential deadlocks with rcu_read_unlock()
The comment above rcu_read_unlock() explains the potential deadlock
if the caller holds one of the locks taken by rt_mutex_unlock() paths,
but it is not clear from this documentation that any lock which can
be taken from interrupt can lead to deadlock as well and we need to
take rt_mutex_lock() into account too.

The problem is that rt_mutex_lock() takes wait_lock without disabling
irqs, and thus an interrupt taking some LOCK can obviously race with
rcu_read_unlock_special() called with the same LOCK held.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-11-13 10:35:40 -08:00
Paul E. McKenney
b6331ae8af rcu: Optimize cond_resched_rcu_qs()
The current implementation of cond_resched_rcu_qs() can invoke
rcu_note_voluntary_context_switch() twice in the should_resched()
case, once via the call to __schedule() and once directly.  However, as
noted by Joe Lawrence in a patch to the team subsystem, cond_resched()
returns an indication as to whether or not the call to __schedule()
actually happened.  This commit therefore changes cond_resched_rcu_qs()
so as to invoke rcu_note_voluntary_context_switch() only when __schedule()
was not called.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-11-13 10:35:39 -08:00
Pranith Kumar
1a6c9b2675 rcu: Add sparse check for RCU_INIT_POINTER()
Add a sparse check when RCU_INIT_POINTER() is used to assign a non __rcu
annotated pointer.

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-11-13 10:35:38 -08:00
Pranith Kumar
8ab8b3e183 documentation: memory-barriers.txt: Correct example for reorderings
Correct the example of memory orderings in memory-barriers.txt

Commit 615cc2c9cf "Documentation/memory-barriers.txt: fix important typo re
memory barriers" changed the assignment to x and y. Change the rest of the
example to match this change.

Reported-by: Ganesh Rapolu <ganesh.rapolu@hotmail.com>
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-11-13 10:34:55 -08:00
Paul E. McKenney
1f7870dd87 documentation: Add atomic_long_t to atomic_ops.txt
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2014-11-13 10:34:54 -08:00
Paul E. McKenney
8b19d1dead documentation: Additional restriction for control dependencies
Short-circuit booleans are not defences against compilers breaking
your intended control dependencies.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2014-11-13 10:34:53 -08:00
Pranith Kumar
74860feed5 documentation: Document RCU self test boot params
Document the RCU self test boot parameters in kernel-parameters.txt.

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-11-13 10:34:52 -08:00
Paul Mackerras
ad0eab9293 Fix thinko in iov_iter_single_seg_count
The branches of the if (i->type & ITER_BVEC) statement in
iov_iter_single_seg_count() are the wrong way around; if ITER_BVEC is
clear then we use i->bvec, when we should be using i->iov.  This fixes
it.

In my case, the symptom that this caused was that a KVM guest doing
filesystem operations on a virtual disk would result in one of qemu's
threads on the host going into an infinite loop in
generic_perform_write().  The loop would hit the copied == 0 case and
call iov_iter_single_seg_count() to reduce the number of bytes to try
to process, but because of the error, iov_iter_single_seg_count()
would just return i->count and the loop made no progress and continued
forever.

Cc: stable@vger.kernel.org # 3.16+
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-13 13:28:55 -05:00
Jeff Layton
b3ecba0967 sunrpc: fix sleeping under rcu_read_lock in gss_stringify_acceptor
Bruce reported that he was seeing the following BUG pop:

    BUG: sleeping function called from invalid context at mm/slab.c:2846
    in_atomic(): 0, irqs_disabled(): 0, pid: 4539, name: mount.nfs
    2 locks held by mount.nfs/4539:
    #0:  (nfs_clid_init_mutex){+.+.+.}, at: [<ffffffffa01c0a9a>] nfs4_discover_server_trunking+0x4a/0x2f0 [nfsv4]
    #1:  (rcu_read_lock){......}, at: [<ffffffffa00e3185>] gss_stringify_acceptor+0x5/0xb0 [auth_rpcgss]
    Preemption disabled at:[<ffffffff81a4f082>] printk+0x4d/0x4f

    CPU: 3 PID: 4539 Comm: mount.nfs Not tainted 3.18.0-rc1-00013-g5b095e9 #3393
    Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
    ffff880021499390 ffff8800381476a8 ffffffff81a534cf 0000000000000001
    0000000000000000 ffff8800381476c8 ffffffff81097854 00000000000000d0
    0000000000000018 ffff880038147718 ffffffff8118e4f3 0000000020479f00
    Call Trace:
    [<ffffffff81a534cf>] dump_stack+0x4f/0x7c
    [<ffffffff81097854>] __might_sleep+0x114/0x180
    [<ffffffff8118e4f3>] __kmalloc+0x1a3/0x280
    [<ffffffffa00e31d8>] gss_stringify_acceptor+0x58/0xb0 [auth_rpcgss]
    [<ffffffffa00e3185>] ? gss_stringify_acceptor+0x5/0xb0 [auth_rpcgss]
    [<ffffffffa006b438>] rpcauth_stringify_acceptor+0x18/0x30 [sunrpc]
    [<ffffffffa01b0469>] nfs4_proc_setclientid+0x199/0x380 [nfsv4]
    [<ffffffffa01b04d0>] ? nfs4_proc_setclientid+0x200/0x380 [nfsv4]
    [<ffffffffa01bdf1a>] nfs40_discover_server_trunking+0xda/0x150 [nfsv4]
    [<ffffffffa01bde45>] ? nfs40_discover_server_trunking+0x5/0x150 [nfsv4]
    [<ffffffffa01c0acf>] nfs4_discover_server_trunking+0x7f/0x2f0 [nfsv4]
    [<ffffffffa01c8e24>] nfs4_init_client+0x104/0x2f0 [nfsv4]
    [<ffffffffa01539b4>] nfs_get_client+0x314/0x3f0 [nfs]
    [<ffffffffa0153780>] ? nfs_get_client+0xe0/0x3f0 [nfs]
    [<ffffffffa01c83aa>] nfs4_set_client+0x8a/0x110 [nfsv4]
    [<ffffffffa0069708>] ? __rpc_init_priority_wait_queue+0xa8/0xf0 [sunrpc]
    [<ffffffffa01c9b2f>] nfs4_create_server+0x12f/0x390 [nfsv4]
    [<ffffffffa01c1472>] nfs4_remote_mount+0x32/0x60 [nfsv4]
    [<ffffffff81196489>] mount_fs+0x39/0x1b0
    [<ffffffff81166145>] ? __alloc_percpu+0x15/0x20
    [<ffffffff811b276b>] vfs_kern_mount+0x6b/0x150
    [<ffffffffa01c1396>] nfs_do_root_mount+0x86/0xc0 [nfsv4]
    [<ffffffffa01c1784>] nfs4_try_mount+0x44/0xc0 [nfsv4]
    [<ffffffffa01549b7>] ? get_nfs_version+0x27/0x90 [nfs]
    [<ffffffffa0161a2d>] nfs_fs_mount+0x47d/0xd60 [nfs]
    [<ffffffff81a59c5e>] ? mutex_unlock+0xe/0x10
    [<ffffffffa01606a0>] ? nfs_remount+0x430/0x430 [nfs]
    [<ffffffffa01609c0>] ? nfs_clone_super+0x140/0x140 [nfs]
    [<ffffffff81196489>] mount_fs+0x39/0x1b0
    [<ffffffff81166145>] ? __alloc_percpu+0x15/0x20
    [<ffffffff811b276b>] vfs_kern_mount+0x6b/0x150
    [<ffffffff811b5830>] do_mount+0x210/0xbe0
    [<ffffffff811b54ca>] ? copy_mount_options+0x3a/0x160
    [<ffffffff811b651f>] SyS_mount+0x6f/0xb0
    [<ffffffff81a5c852>] system_call_fastpath+0x12/0x17

Sleeping under the rcu_read_lock is bad. This patch fixes it by dropping
the rcu_read_lock before doing the allocation and then reacquiring it
and redoing the dereference before doing the copy. If we find that the
string has somehow grown in the meantime, we'll reallocate and try again.

Cc: <stable@vger.kernel.org> # v3.17+
Reported-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-13 13:15:49 -05:00
Krishna Mohan Dani
189c88ced1 ASoC: rt5631: Adding Device Tree compatibility to Realtek's ALC5631/RT5631 codec driver
Signed-off-by: Krishna Mohan Dani <krishna.md@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-13 18:08:01 +00:00
Krishna Mohan Dani
86707f7fec ASoC: rt5631: Adding the description of the codec
Signed-off-by: Krishna Mohan Dani <krishna.md@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-13 18:08:00 +00:00
Krishna Mohan Dani
9e6280cd44 ASoC: rt5631: Add device tree binding documentation
Document the device tree binding for the ALC5631 codec and update vendor
specific prefix for the Realtek.

Signed-off-by: Krishna Mohan Dani <krishna.md@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-13 18:07:52 +00:00
Linus Torvalds
3b98ec4eec sound fixes for 3.18-rc5
Things get calming down, now we have only a few fix patches:
 a trivial fix for memory leak in usb-audio, a patch for the new
 HD-audio PCI id, a device-specific mute-LED fix, and a slightly big
 patch to cover the missing COEF inits of various Realtek codecs.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJUZJv4AAoJEGwxgFQ9KSmkcmwP/0o2Z6B/N60dLHMW6kMQ1+KY
 Zr5dJzFMp195NALBjdDcQ6Q5ETJtkTc71wCUVcrfraO0yh9FzvnwN6fhfHI+/Mck
 h2SNqPfokpdgQgG6wN8RP6Lp/Fi34D3p2fcSK28YrXuU1AruHLp5TQ1qrO0WMLqV
 1Qm0TOWJXaPdC+/Z8HWgzd9Qdb+Tig8/fM72cQrKrv5QdLEZ6+wMTT0mgYJ3sXMa
 PDlLp4VaO+eUMVwbg3TB0hi3S9KJoO5a0oO3R2GWm3USmGkoVUVyJ4RoWKOomha3
 B873c4/zUXUjQdlloi5yNMcwTPy8fQpFXJDkUatporlKjzmQXCp7HPfYkg8y9U5J
 anD0Mk8vwchgjpqyIdHR/hf4CCN1fPq/TgWq//LRtELgaAA4zMKq0SCElUTsT+0l
 BF5filemUDWFMY86Urr4tB1lOj3qRfo9spiC8Tt64/tqHDoDbANA853wvBQbsxxO
 P3mvdDlz+WotNaEB5HdxxXdmrV6V8PnnsNF3Z3JZ/7M7sqssBaGwfnB3EJIY89eF
 ACAlaOnGoV1YJBuJ+ans2xhgGaJPbpAl7POI5/tB0xIVb6esBgeVNuCSRKLwPie4
 HdJ0R7XobKJqX5A8e5L8SlJUSG5pebdCVwl97hXw18L14Ml5U0GiK+3c5uC4FzkV
 iUQ3EyijgsPqRKK3THSk
 =EhoH
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Things get calming down, now we have only a few fix patches: a trivial
  fix for memory leak in usb-audio, a patch for the new HD-audio PCI id,
  a device-specific mute-LED fix, and a slightly big patch to cover the
  missing COEF inits of various Realtek codecs"

* tag 'sound-3.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Add mute LED control for Lenovo Ideapad Z560
  ALSA: hda/realtek - Change EAPD to verb control
  ALSA: usb-audio: Fix memory leak in FTU quirk
  ALSA: hda_intel: Add DeviceIDs for Sunrise Point-LP
2014-11-13 09:57:04 -08:00
Jingoo Han
20f9ece101 PCI: spear: Remove unnecessary OOM message
The site-specific OOM messages are unnecessary, because they duplicate the
MM subsystem generic OOM message.  This patch fixes the following
checkpatch warning:

  WARNING: Possible unnecessary 'out of memory' message

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2014-11-13 10:55:39 -07:00
Jingoo Han
cf3a9d6bae PCI: mvebu: Add a blank line after declarations
This patch fixes the following checkpatch warning:

  WARNING: Missing a blank line after declarations

[bhelgaas: drop mvebu_pcie_add_bus() change because it's going away anyway]
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
2014-11-13 10:53:02 -07:00
Jingoo Han
2c992f3779 PCI: designware: Add a blank line after declarations
This patch fixes the following checkpatch warning:

  WARNING: Missing a blank line after declarations

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-11-13 10:52:04 -07:00
Jingoo Han
bc512c5a8c PCI: exynos: Remove unnecessary return statement
This patch fixes the following checkpatch warning:

  WARNING: void function return statements are not generally useful

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-11-13 10:50:31 -07:00
Jingoo Han
d88a7ef99e PCI: imx6: Use tabs for indentation
This patch fixes the following checkpatch error:

  ERROR: code indent should use tabs where possible

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-11-13 10:48:20 -07:00
Linus Torvalds
2c54396e40 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull SELinux fixlet from James Morris:
 "WARN_ONCE() here will unnecessarily terrify users"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  selinux: convert WARN_ONCE() to printk() in selinux_nlmsg_perm()
2014-11-13 09:46:15 -08:00
Jingoo Han
6670070742 PCI: keystone: Remove unnecessary OOM message
The site-specific OOM messages are unnecessary because they duplicate the
MM subsystem generic OOM message.  This patch fixes the following
checkpatch warning:

  WARNING: Possible unnecessary 'out of memory' message

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-11-13 10:44:02 -07:00
Linus Torvalds
911883759f Merge branch 'stable-3.18' of git://git.infradead.org/users/pcmoore/audit
Pull audit fixes from Paul Moore:
 "After he sent the initial audit pull request for 3.18, Eric asked me
  to take over the management of the audit tree, hence this pull request
  to fix a couple of problems with audit.

  As you can see below, the changes are minimal: adding some whitespace
  to a string so userspace parses it correctly, and fixing a problem
  with audit's usage of fsnotify that was causing audit watch rules to
  be lost.  Neither of these patches were very controversial on the
  mailing lists and they fix real problems, getting them into 3.18 would
  be a good thing"

* 'stable-3.18' of git://git.infradead.org/users/pcmoore/audit:
  audit: keep inode pinned
  audit: AUDIT_FEATURE_CHANGE message format missing delimiting space
2014-11-13 09:36:39 -08:00
Gavin Shan
a4acded086 PCI: Remove unused and broken to_hotplug_slot()
to_hotplug_slot() is unused and wouldn't work anyway, because struct
hotplug_slot no longer contains a struct kobject (it was removed by
f46753c5e3 ("PCI: introduce pci_slot")).

Remove to_hotplug_slot().

[bhelgaas: changelog]
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-11-13 10:35:25 -07:00
Gavin Shan
bb383e283b PCI: Make FLR and AF FLR reset warning messages different
We have same warning message for FLR and AF FLR and users can't know which
type of resets the PCI device is taking when there are pending
transactions.  Print different messages for FLR and AF FLR cases.

[bhelgaas: make code structure parallel, add "anyway" to suggest risk]
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-11-13 10:28:02 -07:00
Linus Torvalds
5a7a662cc6 . stable fix for dm-thin that avoids normal IO racing with discard
. stable fix for a dm-cache related bug in dm-btree walking code that
   results from using very large fast device (e.g. 4T) with a very small
   cache blocksize (e.g. 32K) -- this is a very uncommon configuration
 
 . a couple fixes for dm-raid (one for stable and the other addresses a
   crash in 3.18-rc1 code)
 
 . stable fix for dm-thinp that addresses a very rare dm-bufio bug having
   to do with memory reclaimation (via shrinker) when using dm-thinp
   ontop of loopback devices
 
 . fix a leak in dm-stripe target constructor's error path
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUY/p7AAoJEMUj8QotnQNaxPEIAJsmJC5ujQAIdm5yUxsOWruU
 Y/36HbPvlmV8fgWqGyjaubBrzqgWry/yW/u/Sv9+9rE3Zh6JSVLVrCA6uZZ3Yr+j
 HKYEPjm/O0zVJepfEDKtjG6dxeaql47+luwU1iP1bAYeZE3zmKn1oFT2GW5gTbxO
 2n3MiN/dyX8v0cTw6r0O69luIAu93CSY0XDk+1ynfKlKKVmgcAUPvKuobF+yHXoF
 Rd7KTqFoK6HgRhdUHvUQnCGDandZ9MHjt3oW9p3dv3ezvW1cNUARoVHMRGG6Awfu
 WZkQ/VORDeaJT+bhjGfPIla1HbgxEKJrgzTUlpj+P6K2uPK2f6ECEyBpDLWKy9g=
 =lkSu
 -----END PGP SIGNATURE-----

Merge tag 'dm-3.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - stable fix for dm-thin that avoids normal IO racing with discard

 - stable fix for a dm-cache related bug in dm-btree walking code that
   results from using very large fast device (eg 4T) with a very small
   cache blocksize (eg 32K) -- this is a very uncommon configuration

 - a couple fixes for dm-raid (one for stable and the other addresses a
   crash in 3.18-rc1 code)

 - stable fix for dm-thinp that addresses a very rare dm-bufio bug
   having to do with memory reclaimation (via shrinker) when using
   dm-thinp ontop of loopback devices

 - fix a leak in dm-stripe target constructor's error path

* tag 'dm-3.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm btree: fix a recursion depth bug in btree walking code
  dm thin: grab a virtual cell before looking up the mapping
  dm raid: fix inaccessible superblocks causing oops in configure_discard_support
  dm raid: ensure superblock's size matches device's logical block size
  dm bufio: change __GFP_IO to __GFP_FS in shrinker callbacks
  dm stripe: fix potential for leak in stripe_ctr error path
2014-11-13 09:19:20 -08:00
Duc Dang
336b5be2c5 PCI: xgene: Assign resources to bus before adding new devices
The X-Gene PCIe driver assumes pci_scan_root_bus() assigns resources as
proposed in [1].  But we dropped patch [1] because it would break some
architectures, which means the X-Gene PCIe driver is currently broken.

Add calls to scan the bus, assign resources, and add devices in the X-Gene
driver to fix this.

[bhelgaas: changelog]
[1] http://lkml.kernel.org/r/1412000971-9242-11-git-send-email-Liviu.Dudau@arm.com
Signed-off-by: Duc Dang <dhdang@apm.com>
Signed-off-by: Tanmay Inamdar <tinamdar@apm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-11-13 09:53:30 -07:00
Jingoo Han
e73044a069 PCI: dra7xx: Add __init annotation to dra7xx_add_pcie_port()
Add __init annotation to dra7xx_add_pcie_port(), because
dra7xx_add_pcie_port() is called only by dra7xx_pcie_probe() which is
marked __init.  This patch fixes a section mismatch warning:

WARNING: drivers/pci/host/built-in.o(.text.unlikely+0xcc): Section mismatch in reference from the function dra7xx_add_pcie_port() to the function .init.text:dw_pcie_host_init()

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-11-13 09:49:15 -07:00
Hans de Goede
90795c560d ARM: dts: sun6i: Add support for the status led
The Mele M9 / A1000G quad has a blue status led, add support for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-11-13 17:48:41 +01:00
Hans de Goede
5070ac3ee2 ARM: dts: sun6i: Add EHCI support for the M9 board
The Mele M9 / A1000G quad uses both usb-ports, one goes to an internal
usb wifi card, the other to a build-in usb-hub, so neither need their
OHCI companion controller to be enabled since the are always connected at
USB-2 speeds.

The controller which is attached to the wifi also does not need a vbus
regulator.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-11-13 17:47:06 +01:00
Jingoo Han
992e7bd2be PCI: spear: Add __init annotation to spear13xx_add_pcie_port()
Add __init annotation to spear13xx_add_pcie_port(), because
spear13xx_add_pcie_port() is called only by spear13xx_pcie_probe(), which
is marked __init.  This fixes a section mismatch warning:

WARNING: drivers/pci/host/built-in.o(.text.unlikely+0x94): Section mismatch in reference from the function spear13xx_add_pcie_port() to the function .init.text:dw_pcie_host_init()

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2014-11-13 09:46:47 -07:00
Hans de Goede
0d716ea960 ARM: dts: sunxi: Add regulator-boot-on property to ahci-5v regulator
This avoids it getting briefly turned off between when the regulator getting
registered and the ahci driver turning it back on, thus avoiding the disk
going into emergency head park mode.

Reported-by: Bruno Prémont <bonbons@linux-vserver.org>
Tested-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-11-13 17:43:42 +01:00
Jingoo Han
a9875d83a0 PCI: spear: Rename add_pcie_port(), pcie_init() to spear13xx_add_pcie_port(), etc.
The add_pcie_port() and pcie_init() functions are SPEAr13xx-specific.  Add
spear13xx prefix to avoid collision in global name space.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2014-11-13 09:43:26 -07:00
Jingoo Han
23926c8dbd PCI: dra7xx: Rename add_pcie_port() to dra7xx_add_pcie_port()
The add_pcie_port() function is dra7xx-specific.  Add dra7xx prefix to
avoid collision in global name space.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-11-13 09:41:21 -07:00
Felipe Balbi
79005fbd3e ARM: OMAP2+: hwmod: drop unnecessary list initialization
ml->node and sl->node are currently initialized
by means of INIT_LIST_HEAD(). That initialiation
is followed by a list_add() call.

Looking at what both these functions do we will have:

	ml->node.next = &ml->node;
	ml->node.prev = &ml->node;
	oi->master->master_ports.next.prev = &ml->node;
	ml->node.next = &oi->master->master_ports.next;
	ml->node.prev = &oi->master->master_ports;
	oi->master->master_ports.next = &ml->node;

from this, it's clear that both INIT_LIST_HEAD() calls
are unnecessary and can be safely removed.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-11-13 09:36:55 -07:00
Minghuan Lian
62d0ff83c6 PCI: layerscape: Add Freescale Layerscape PCIe driver
Add support for Freescale Layerscape PCIe controller.  This driver re-uses
the Synopsis DesignWare core code.

[bhelgaas: add Kconfig dependency on CONFIG_ARM]
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-11-13 09:31:52 -07:00