Commit graph

505,617 commits

Author SHA1 Message Date
Bob Peterson
1a8550332a GFS2: If we use up our block reservation, request more next time
If we run out of blocks for a given multi-block allocation, we obviously
did not reserve enough. We should reserve more blocks for the next
reservation to reduce fragmentation. This patch increases the size hint
for reservations when they run out.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-11-03 19:26:54 +00:00
Bob Peterson
33ad5d5428 GFS2: Only increase rs_sizehint
If an application does a sequence of (1) big write, (2) little write
we don't necessarily want to reset the size hint based on the smaller
size. The fact that they did any big writes implies they may do more,
and therefore we should try to allocate bigger block reservations, even
if the last few were small writes. Therefore this patch changes function
gfs2_size_hint so that the size hint can only grow; it cannot shrink.
This is especially important where there are multiple writers.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-11-03 19:25:41 +00:00
Bob Peterson
0e27c18c30 GFS2: Set of distributed preferences for rgrps
This patch tries to use the journal numbers to evenly distribute
which node prefers which resource group for block allocations. This
is to help performance.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-11-03 19:24:49 +00:00
Fabian Frederick
37975f1503 GFS2: directly return gfs2_dir_check()
No need to store gfs2_dir_check result and test it before returning.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-11-03 19:23:32 +00:00
Heiko Carstens
52100d7f1c ftracetest: Sort testcases
Make sure the order of the executed testcases is always the same.

Link: http://lkml.kernel.org/p/1413802323-5297-3-git-send-email-heiko.carstens@de.ibm.com

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-03 14:15:47 -05:00
Heiko Carstens
d20058f674 ftracetest: Add kprobes on ftrace testcase
Add a kprobes on ftrace testcase. The testcase verifies that
- enabling and disabling function tracing works on a function which
  already contains a dynamic kprobe
- adding and removing a dynamic kprobe works on a function which is
  already enabled for function tracing

Link: http://lkml.kernel.org/p/1413802323-5297-2-git-send-email-heiko.carstens@de.ibm.com

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-03 14:15:46 -05:00
Steven Rostedt (Red Hat)
e7dbb48958 ftracetest: Take the first debugfs mount found
Running ftracetests on a box that mounted debugfs in two locations
made the ftracetests fail. This is because the tests uses a grep
of debugfs from the /proc/mounts file to find the debugfs mount
point, and then appends "/tracing" to that string to get the tracing
directory.

If the debugfs directory is mounted twice, then that grep will return
two answers and appending "/tracing" to a string with two lines will
not work.

Use "head -1" to only take the first mount point found.

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-03 13:42:49 -05:00
Akihiro Tsukada
01bd399a10 [media] dvb:tc90522: fix always-false expression
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 16:40:10 -02:00
Akihiro Tsukada
8e281fafda [media] dvb-core: set default properties of ISDB-S
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 16:40:09 -02:00
Akihiro Tsukada
906aaf5a19 [media] dvb:tc90522: fix stats report
* report the fixed per-transponder symbolrate instead of per-TS ones
* add output TS-ID report

Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 16:40:09 -02:00
Axel Lin
148bb0439a soc: ti: knav_qmss_queue: Use list_for_each_entry_safe to prevent use after free
list_for_each_entry_safe() is necessary if list objects are deleted from
the list while traversing it.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2014-11-03 10:22:06 -08:00
Mauro Carvalho Chehab
ed3da2bf2e [media] cx23885-dvb: Fix some issues at the DVB error handling
X-Patchwork-Delegate: m.chehab@samsung.com
As pointed by smatch:
	drivers/media/pci/cx23885/cx23885-dvb.c:1066 dvb_register() error: we previously assumed 'fe0->dvb.frontend' could be null (see line 1060)
	drivers/media/pci/cx23885/cx23885-dvb.c:1990 cx23885_dvb_register() error: we previously assumed 'fe0' could be null (see line 1975)

What happens is that the error handling logic when a frontend
register fails sometimes keep doing the work, as if it didn't
fail.

This could potentially cause an OOPS. So, simplify the logic
a little bit and return an error if frontend fails before
trying to setup VB2 queue.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 16:21:29 -02:00
Olli Salonen
61b103e85a [media] cx23885: add support for TechnoTrend CT2-4500 CI
TechnoTrend CT2-4500 CI is a PCIe device with DVB-T2/C tuner. It is
similar to DVBSky T980C, just with different PCI ID and remote controller.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 16:19:29 -02:00
Matthias Schwarzott
c4e7b893a5 [media] tveeprom: Update list of chips and extend serial number to 32bits
The update was supplied directly by PCTV.

Add tuner ids 182-188.
Add audproc ids 45-52.
Add decoder chip ids 43-53.
Use 32bits for the serial number.

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 16:18:49 -02:00
Eyal Shapira
82e8aea03f iwlwifi: mvm: handle error from iwl_trans_update_sf
iwl_trans_update_sf can fail and this wasn't handled.
Fix this.

Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-11-03 20:09:21 +02:00
Mauro Carvalho Chehab
336fea9229 [media] cx231xx: Improve the log message
Unfortunately, on devices that have multiple interfaces, udev->dev
points to the parent device (usb) instead of the cx231xx specific one.

Due to that the logs don't look too nice, as they'll print messages
as if they were produced by USB core:
  usb-1-2: New device Conexant Corporation Polaris AV Capturb @ 480 Mbps (1554:5010) with 7 interfaces

Instead of using the name of the parent device, let's use the name
of the first cx231xx interface for all cx231xx sub-modules.

With this path, the logs will be nicer:

  cx231xx 1-2:1.1: New device Conexant Corporation Polaris AV Capturb @ 480 Mbps (1554:5010) with 7 interfaces

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 15:59:59 -02:00
Mauro Carvalho Chehab
ac550faabd [media] cx231xx: simplify I2C scan debug messages
Don't need to show when it starts or stops. Just print lines
when devices are found.

After the changes, the output for i2c scan will be like:

	usb 1-2: i2c scan: found device @ port 0 addr 0x40  [???]
	usb 1-2: i2c scan: found device @ port 0 addr 0x60  [colibri]
	usb 1-2: i2c scan: found device @ port 0 addr 0x88  [hammerhead]
	usb 1-2: i2c scan: found device @ port 0 addr 0x98  [???]
	usb 1-2: i2c scan: found device @ port 3 addr 0xa0  [eeprom]
	usb 1-2: i2c scan: found device @ port 2 addr 0x60  [colibri]
	usb 1-2: i2c scan: found device @ port 2 addr 0xc0  [tuner]
	usb 1-2: i2c scan: found device @ port 4 addr 0x20  [demod]

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 15:59:35 -02:00
Mauro Carvalho Chehab
3d28cf3ee6 [media] cx231xx: too much changes. Bump version number
The I2C mux changes are significant. Bump version number.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 15:59:17 -02:00
Mauro Carvalho Chehab
fb1817e48f [media] cx231xx: use dev_info() for extension load/unload
Now that we're using dev_foo, the logs become like:

	usb 1-2: DVB: registering adapter 0 frontend 0 (Fujitsu mb86A20s)...
	usb 1-2: Successfully loaded cx231xx-dvb
	cx231xx: Cx231xx dvb Extension initialized

It is not clear, by the logs, that usb 1-2 name is an alias for
cx231xx. So, we also need to use dvb_info() at extension load/unload.

After the patch, it will print:
	usb 1-2: Cx231xx dvb Extension initialized

With is coherent with the other logs.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 15:59:03 -02:00
Mauro Carvalho Chehab
ec2a387eaf [media] cx231xx: add addr for demod and make i2c_devs const
I2C address 0x10 is the demod. While here, make the array const.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 15:58:45 -02:00
Mauro Carvalho Chehab
3b795d01c2 [media] cx231xx: use dev_foo instead of printk
There are several places at cx231xx that uses printk without
any special reason. Change all of them to use dev_foo().

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 15:58:30 -02:00
Mauro Carvalho Chehab
56d8a3b068 [media] cx231xx: get rid of audio debug parameter
There's just one debug level on cx231xx-audio. So, converting it
to dev_dbg() is easy.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 15:58:09 -02:00
Mauro Carvalho Chehab
b7085c0864 [media] cx231xx: convert from pr_foo to dev_foo
Replace all pr_foo occurrences by dev_foo, as this is
the recommended way for drivers.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 15:57:54 -02:00
Mauro Carvalho Chehab
77e97ba2da [media] cx231xx: disable I2C errors during i2c_scan
Otherwise, it would produce lots of useless messages like:
	cx231xx: cx231xx_send_usb_command: failed with status --32

After this patch, I2C scan will produce an useful report:

[ 9494.050807] cx231xx: i2c_scan: checking for I2C devices on port=0 ..
[ 9494.074928] cx231xx: i2c scan: Completed Checking for I2C devices on port=0.
[ 9494.074936] cx231xx: i2c_scan: checking for I2C devices on port=3 ..
[ 9494.098934] cx231xx: i2c scan: Completed Checking for I2C devices on port=3.
[ 9494.098942] cx231xx: i2c_scan: checking for I2C devices on port=2 ..
[ 9494.118440] cx231xx: i2c scan: Completed Checking for I2C devices on port=2.
[ 9494.118448] cx231xx: i2c_scan: checking for I2C devices on port=4 ..
[ 9494.141889] cx231xx: i2c scan: Completed Checking for I2C devices on port=4.

[ 9494.060182] cx231xx: i2c scan: found device @ 0x40  [???]
[ 9494.062953] cx231xx: i2c scan: found device @ 0x60  [colibri]
[ 9494.066071] cx231xx: i2c scan: found device @ 0x88  [hammerhead]
[ 9494.067383] cx231xx: i2c scan: found device @ 0x98  [???]
[ 9494.090113] cx231xx: i2c scan: found device @ 0xa0  [eeprom]
[ 9494.106463] cx231xx: i2c scan: found device @ 0x60  [colibri]
[ 9494.113762] cx231xx: i2c scan: found device @ 0xc0  [tuner]
[ 9494.121882] cx231xx: i2c scan: found device @ 0x20  [???]
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 15:57:28 -02:00
Matthias Schwarzott
0d88d0916b [media] cx231xx: use 1 byte read for i2c scan
Now cx231xx_i2c_check_for_device works like i2c_check_for_device of em28xx driver.

For me this fixes scanning of all ports but port 2.

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 15:57:08 -02:00
Mauro Carvalho Chehab
6ac825cb3e [media] cx25840: convert max_buf_size var to lowercase
CodingStyle fix: vars should be in lowercase.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 15:56:49 -02:00
Mauro Carvalho Chehab
a7119f8629 [media] cx25840: Don't report an error if max size is adjusted
There's no reason to report:
	cx25840 7-0044:  Firmware download size changed to 16 bytes max length

If the driver needs to adjust the buffer's maximum size.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 15:56:36 -02:00
Mauro Carvalho Chehab
ed0e3729c9 [media] cx231xx: Cleanup printk at the driver
There are lots of debug printks printed with pr_info. Also, the
printk's data are not too coherent:

- there are duplicated driver name at the print format;
- function name format string differs from function to function;
- long strings broken into multiple lines;
- some printks just produce ugly reports, being almost useless
  as-is.

Do a cleanup on that.

Still, there are much to be done in order to do a better printk
job on this driver, but, at least it will now be a way less
verbose, if debug printks are disabled, and some logs might
actually be useful.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 15:56:22 -02:00
Mauro Carvalho Chehab
88538bb544 [media] cx231xx: Fix identation
One of the identation blocks is wrong. Fix it.

While here, replace pr_info by pr_debug inside such block and
add the function name to the print messages, as otherwise they
will not help much.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 15:56:03 -02:00
Mauro Carvalho Chehab
589dadf299 [media] cx231xx: get rid of driver-defined printk macros
It currently does just like what pr_foo() macros do. So,
replace them.

A deeper cleanup is needed, as there are lots of debug macros
printed with pr_info.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 15:55:23 -02:00
Mauro Carvalho Chehab
f2dd851ff1 [media] fix a warning on avr32 arch
X-Patchwork-Delegate: m.chehab@samsung.com
on avr32 arch, those warnings happen:
	drivers/media/firewire/firedtv-fw.c: In function 'node_update':
	drivers/media/firewire/firedtv-fw.c:329: warning: comparison is always true due to limited range of data type

In this particular case, the signal is desired, as the isochannel
var can be initalized with -1 inside the driver.

So, change the type to s8, to avoid issues on archs where char
is unsigned.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Reviewed-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 15:53:15 -02:00
Nicolas Ferre
bcf8c7e770 ARM: at91: remove at91sam9rl legacy board support
Remove legacy support for at91sam9rl boards.
This include board files removal plus all legacy code for non DT boards
support.
Use the Device Tree for running this board with newer kernels.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[nicolas.ferre@atmel.com: Add sentence about DT]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-03 18:48:02 +01:00
Nicolas Ferre
4bf7753b8a ARM: at91: remove at91sam9g45/9m10 legacy board support
Remove legacy support for at91sam9g45/9m10 boards.
This include board files removal plus all legacy code for non DT boards
support (i.e. at91sam9g45.c and at91sam9g45_devices.c).
Use the Device Tree for running this board with newer kernels.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[nicolas.ferre@atmel.com: Add sentence about DT, removed defconfig]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-03 18:48:01 +01:00
Nicolas Ferre
7538ec7d1e ARM: at91: remove no-MMU at91x40 support
As there is currently no-one to take care of this old !MMU target and as its
support in recent kernels is a bit rotten, remove this at91x40 support and the
board file associated with it (at91eb01).
There are modern ARM !MMU in Mainline now so this target is not interesting for
building tests anymore. It would be better to start from these modern ARM !MMU
platforms to reintroduce at91x40 support if needed.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2014-11-03 18:48:00 +01:00
stephen hemminger
7071cf7fc4 uapi: add missing network related headers to kbuild
The makefile for sanitizing kernel headers uses the kbuild file
to determine which files to do. Several networking related headers
were missing. Without these headers iproute2 build would break.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03 12:33:29 -05:00
David S. Miller
547f2735c2 Merge branch 'mlx4-next'
Or Gerlitz says:

====================
Mellanox ethernet driver update Oct-30-2014

The 1st patch from Saeed fixes a bug in the last net-next batch where
a VF could get access to set port configuration, the next patch from Amir
fixes a race in the port VPI logic. Next are two performance patches from Ido.

The patch to add checksum complete status on GRE and such packets was
preceded with a patch that converted the driver to only use napi_gro_receive
vs. the current code which goes through napi_gro_frags on it's usual track.
Eric D. has some thoughts and suggestions on that change for which we
want to take the time and consider, so for the time being dropped that
patch and the ones that depend on it.

Changes from V0:
  - have the caller to provide the __GFP_COLD hint to the service function
  - dropped the patch that changes the GRO logic and the subsequent dependent
    patches.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03 12:28:21 -05:00
Matan Barak
d475c95b4b net/mlx4_core: Add retrieval of CONFIG_DEV parameters
Add code to issue CONFIG_DEV "get" firmware command.

This command is used in order to obtain certain parameters used for
supporting various RX checksumming options and vxlan UDP port.

The GET operation is allowed for VFs too.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Shani Michaeli <shanim@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03 12:28:14 -05:00
Ido Shamay
1ab25f86c4 net/mlx4_en: Add __GFP_COLD gfp flags in alloc_pages
Needed in order to get cache cold pages (L3 flushed) for HW scatter.

Otherwise memory may flush those entries when the packet comes from
PCI, causing back pressure resulting in BW decrease.

Signed-off-by: Ido Shamay <idos@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03 12:28:13 -05:00
Ido Shamay
5f6e980080 net/mlx4_en: Remove RX buffers alignment to IP_ALIGN
When IP_ALIGN has a non zero value, hardware will write to a non aligned
address. The only reader from this address is when copying the header
from the first frag into the linear buffer (further access to the IP
address will be from the linear buffer, in which the headers are
aligned). Since the penalty of non align access by the hardware is
greater than the software memcpy, changing the frag_align to always be 0.

Signed-off-by: Ido Shamay <idos@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03 12:28:13 -05:00
Amir Vadai
0a98455666 net/mlx4_core: Protect port type setting by mutex
We need to protect set_port_type() for concurrency, as the sysfs code could
call it from mutliple contexts in parallel.

The port_mutex is not enough because we need to protect from concurrent
modification of 'info' and stopping of the port sensing work.

Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03 12:28:13 -05:00
Saeed Mahameed
6e80669998 net/mlx4_core: Prevent VF from changing port configuration
Added wrapper to the ACCESS_REG command for handling guest HW
registers access, preventing write operations, but do allow reads.

This will prevent SRIOV guests to change port PTYS configuration,
such as speed/advertised link modes.

Fixes: adbc7ac5c1 ('net/mlx4_core: Introduce ACCESS_REG CMD [...]')
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03 12:28:13 -05:00
Eric Dumazet
d75b1ade56 net: less interrupt masking in NAPI
net_rx_action() can mask irqs a single time to transfert sd->poll_list
into a private list, for a very short duration.

Then, napi_complete() can avoid masking irqs again,
and net_rx_action() only needs to mask irq again in slow path.

This patch removes 2 couples of irq mask/unmask per typical NAPI run,
more if multiple napi were triggered.

Note this also allows to give control back to caller (do_softirq())
more often, so that other softirq handlers can be called a bit earlier,
or ksoftirqd can be wakeup earlier under pressure.

This was developed while testing an alternative to RX interrupt
mitigation to reduce latencies while keeping or improving GRO
aggregation on fast NIC.

Idea is to test napi->gro_list at the end of a napi->poll() and
reschedule one NAPI poll, but after servicing a full round of
softirqs (timers, TX, rcu, ...). This will be allowed only if softirq
is currently serviced by idle task or ksoftirqd, and resched not needed.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03 12:25:09 -05:00
Eric Dumazet
4cdb1e2e3d net: shrink struct softnet_data
flow_limit in struct softnet_data is only read from local cpu
and can be moved to fill a hole, reducing softnet_data size by
64 bytes on x86_64

While we are at it, move output_queue, output_queue_tailp and
completion_queue, so that rx / tx paths touch a single cache line.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03 12:25:08 -05:00
Guenter Roeck
c1207c049b netfilter: nft_reject_bridge: Fix powerpc build error
Fix:
net/bridge/netfilter/nft_reject_bridge.c:
In function 'nft_reject_br_send_v6_unreach':
net/bridge/netfilter/nft_reject_bridge.c:240:3:
	error: implicit declaration of function 'csum_ipv6_magic'
   csum_ipv6_magic(&nip6h->saddr, &nip6h->daddr,
   ^
make[3]: *** [net/bridge/netfilter/nft_reject_bridge.o] Error 1

Seen with powerpc:allmodconfig.

Fixes: 523b929d54 ("netfilter: nft_reject_bridge: don't use IP stack to reject traffic")
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03 12:12:34 -05:00
Guennadi Liakhovetski
6ed9b28504 [media] V4L2: fix VIDIOC_CREATE_BUFS 32-bit compatibility mode data copy-back
Similar to an earlier patch, fixing reading user-space data for the
VIDIOC_CREATE_BUFS ioctl() in 32-bit compatibility mode, this patch fixes
writing back of the possibly modified struct to the user. However, unlike
the former bug, this one is much less harmful, because it only results in
the kernel failing to write the .type field back to the user, but in fact
this is likely unneeded, because the kernel will hardly want to change
that field. Therefore this bug is more of a theoretical nature.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 15:11:59 -02:00
Masanari Iida
70c036347f Documentation: Fix a typo in mailbox.txt
This patch fix a typo in Documentation/mailbox.txt
"bool async" is defined in struct demo_client.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2014-11-03 11:54:50 -05:00
Masanari Iida
f353d71f75 treewide: Fix typo in Documentation/DocBook/device-drivers
This patch fix speeling typo found in html files within
Documentation/DocBook/device-drivers.
It is because html files are generated from comments in source,
so I have to fix comments in the source.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2014-11-03 11:53:34 -05:00
Dan Carpenter
66ae9fc237 [media] stv090x: remove indent levels in stv090x_get_coldlock()
This code is needlessly complicated and checkpatch.pl complains that we
go over the 80 characters per line limit.

If we flip the "if (!lock) {" test to "if (lock) return;" then we can
remove an indent level from the rest of the function.

We can add two returns in the "if (state->srate >= 10000000) {"
condition and move the else statement back an additional indent level.

There is another "if (!lock) {" check which can be removed since we have
already checked "lock" and know it is zero at this point.  This second
check on "lock" is also a problem because it sets off a static checker
warning.  I have reviewed this code for some time to see if something
else was intended, but have concluded that it was simply an oversight
and should be removed.  Removing this duplicative check gains us an
third indent level.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 14:53:14 -02:00
Simon Farnsworth
9fd1f310a1 [media] DocBook media: Clarify V4L2_FIELD_ANY for drivers
Documentation for enum v4l2_field did not make it clear that V4L2_FIELD_ANY
is only acceptable as input to the kernel, not as a response from the
driver.

Make it clear, to stop userspace developers like me assuming it can be
returned by the driver.

Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 14:47:47 -02:00
Josh Triplett
21228a1868 CodingStyle: Add a chapter on conditional compilation
Document several common practices and conventions regarding conditional
compilation, most notably the preference for ifdefs in headers rather
than .c files.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2014-11-03 11:46:02 -05:00