Commit graph

505,617 commits

Author SHA1 Message Date
Linus Walleij
98ba16bb22 ARM: nomadik: push ethernet down to board
The SoC file defines the location and type of the ethernet
adapter, this should be in the per-board file, as it is by no
means necessary to have an ethernet adapter connected to this
memory space.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-31 21:44:31 +01:00
Linus Walleij
43c4034963 ARM: nomadik: set up MCDATDIR2
This extra data line for high-speed MMC transfers was unrouted,
set it up properly in the dtsi file.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-31 21:44:31 +01:00
Linus Walleij
2096eb80e4 ARM: nomadik: move GPIO I2C to S8815 board file
The idea to use two GPIO pins for bit-banged I2C is an S8815
pecularity, so move this over to the board-specific file and
out of the SoC core DTSI file.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-31 21:44:30 +01:00
Linus Walleij
a81cf1ad2a ARM: nomadik: disable chrystals in top level board files
Do not force disable the chrystals in the SoC file, this is
per-board dependent.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-31 21:44:30 +01:00
Linus Walleij
6bd5e87017 ARM: nomadik: move MMC/SD card detect GPIO to board DTS
This pushes the setting of the card detect GPIO pin down into
the top-level file for the board, since it is not a property of
the ASIC (which this DTSI is about) but a property of the board
design.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-31 21:44:29 +01:00
Ilya Dryomov
e9226d7c9f libceph: eliminate unnecessary allocation in process_one_ticket()
Commit c27a3e4d66 ("libceph: do not hard code max auth ticket len")
while fixing a buffer overlow tried to keep the same as much of the
surrounding code as possible and introduced an unnecessary kmalloc() in
the unencrypted ticket path.  It is likely to fail on huge tickets, so
get rid of it.

Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-31 23:43:08 +03:00
David S. Miller
99a49ce613 Merge tag 'master-2014-10-30' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
John W. Linville says:

====================
pull request: wireless 2014-10-31

Please pull this small batch of spooky fixes intended for the 3.18
stream...boo!

Cyril Brulebois adds an rt2x00 device ID.

Dan Carpenter provides a one-line masking fix for an ath9k debugfs
entry.

Larry Finger gives us a package of small rtlwifi fixes which add some
bits that were left out of some feature updates that were included
in the merge window.  Hopefully this isn't a sign that the rtlwifi
base is getting too big...

Marc Yang brings a fix for a temporary mwifiex stall when doing 11n
RX reordering.

Please let me know if there are problems!
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-31 16:18:35 -04:00
Lennart Sorensen
1e5c4bc497 drivers: net: cpsw: Support ALLMULTI and fix IFF_PROMISC in switch mode
The cpsw driver did not support the IFF_ALLMULTI flag which makes dynamic
multicast routing not work.  Related to this, when enabling IFF_PROMISC
in switch mode, all registered multicast addresses are flushed, resulting
in only broadcast and unicast traffic being received.

A new cpsw_ale_set_allmulti function now scans through the ALE entry
table and adds/removes the host port from the unregistered multicast
port mask of each vlan entry depending on the state of IFF_ALLMULTI.
In promiscious mode, cpsw_ale_set_allmulti is used to force reception
of all multicast traffic in addition to the unicast and broadcast traffic.

With this change dynamic multicast and promiscious mode both work in
switch mode.

Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-31 16:17:56 -04:00
Lennart Sorensen
6f979eb3fc drivers: net: cpsw: Fix broken loop condition in switch mode
0d961b3b52 (drivers: net: cpsw: fix buggy
loop condition) accidentally fixed a loop comparison in too many places
while fixing a real bug.

It was correct to fix the dual_emac mode section since there 'i' is used
as an index into priv->slaves which is a 0 based array.

However the other two changes (which are only used in switch mode)
are wrong since there 'i' is actually the ALE port number, and port 0
is the host port, while port 1 and up are the slave ports.

Putting the loop condition back in the switch mode section fixes it.

A comment has been added to point out the intent clearly to avoid future
confusion.  Also a comment is fixed that said the opposite of what was
actually happening.

Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-31 16:17:56 -04:00
Lennart Sorensen
10738eeaf4 drivers: net: cpsw: Support ALLMULTI and fix IFF_PROMISC in switch mode
The cpsw driver did not support the IFF_ALLMULTI flag which makes dynamic
multicast routing not work.  Related to this, when enabling IFF_PROMISC
in switch mode, all registered multicast addresses are flushed, resulting
in only broadcast and unicast traffic being received.

A new cpsw_ale_set_allmulti function now scans through the ALE entry
table and adds/removes the host port from the unregistered multicast
port mask of each vlan entry depending on the state of IFF_ALLMULTI.
In promiscious mode, cpsw_ale_set_allmulti is used to force reception
of all multicast traffic in addition to the unicast and broadcast traffic.

With this change dynamic multicast and promiscious mode both work in
switch mode.

Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-31 16:16:42 -04:00
Lennart Sorensen
35532c211b drivers: net: cpsw: Fix broken loop condition in switch mode
0d961b3b52 (drivers: net: cpsw: fix buggy
loop condition) accidentally fixed a loop comparison in too many places
while fixing a real bug.

It was correct to fix the dual_emac mode section since there 'i' is used
as an index into priv->slaves which is a 0 based array.

However the other two changes (which are only used in switch mode)
are wrong since there 'i' is actually the ALE port number, and port 0
is the host port, while port 1 and up are the slave ports.

Putting the loop condition back in the switch mode section fixes it.

A comment has been added to point out the intent clearly to avoid future
confusion.  Also a comment is fixed that said the opposite of what was
actually happening.

Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-31 16:16:42 -04:00
Guenter Roeck
e0fb6fb6d5 net: ethtool: Return -EOPNOTSUPP if user space tries to read EEPROM with lengh 0
If a driver supports reading EEPROM but no EEPROM is installed in the system,
the driver's get_eeprom_len function returns 0. ethtool will subsequently
try to read that zero-length EEPROM anyway. If the driver does not support
EEPROM access at all, this operation will return -EOPNOTSUPP. If the driver
does support EEPROM access but no EEPROM is installed, the operation will
return -EINVAL. Return -EOPNOTSUPP in both cases for consistency.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-31 16:12:34 -04:00
Ezequiel Garcia
0089b745df ethernet: mvneta: Use PHY status standard message
Use phy_print_status() to report a change in the PHY status.
The current message is not verbose enough, so this commit improves
it by using the generic status message.

After this change, the kernel reports PHY status down and up events as:

mvneta f1070000.ethernet eth0: Link is Down
mvneta f1070000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-31 16:11:23 -04:00
Andy Shevchenko
1e19e084ea stmmac: pci: set default of the filter bins
The commit 3b57de958e brought the support for a different amount of the
filter bins, but didn't update the PCI driver accordingly. This patch appends
the default values when the device is enumerated via PCI bus.

Fixes: 3b57de958e (net: stmmac: Support devicetree configs for mcast and ucast filter entries)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-31 16:09:57 -04:00
Eric Dumazet
31aa860e0a bonding: add bond_tx_drop() helper
Because bonding stats are usually sum of slave stats, it was
not easy to account for tx drops at bonding layer.

We can use dev->tx_dropped for this, as this counter is later
added to the device stats (in dev_get_stats())

This extends the idea we had in commit ee63771474 ("bonding: Simplify
the xmit function for modes that use xmit_hash") for bond_3ad_xor_xmit()
to other bonding modes.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-31 16:09:03 -04:00
Xinming Hu
6bc6c49f1e mwifiex: add cfg80211 dump_survey handler
This patch add cfg80211 dump_survey handler for mwifiex.
This handler will be called to report channel statistics
to cfg80211.

This in turn adds ACS support for mwifiex AP.

Signed-off-by: Xinming Hu <huxm@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-31 16:07:49 -04:00
Avinash Patil
bf35443314 mwifiex: channel statistics support for mwifiex
This patch adds support to record channel statistics during
scan. With extended scan, scan results are returned as events from
FW while channel statistics are part of scan command response.
We store these channel statistics in adapter.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Xinmin Hu <huxm@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-31 16:07:49 -04:00
John W. Linville
15a892e728 Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next 2014-10-31 16:05:31 -04:00
Tony Lindgren
7d2911c438 net: smc91x: Fix gpios for device tree based booting
With legacy booting, the platform init code was taking care of
the configuring of GPIOs. With device tree based booting, things
may or may not work depending what bootloader has configured or
if the legacy platform code gets called.

Let's add support for the pwrdn and reset GPIOs to the smc91x
driver to fix the issues of smc91x not working properly when
booted in device tree mode.

And let's change n900 to use these settings as some versions
of the bootloader do not configure things properly causing
errors.

Reported-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-31 15:54:18 -04:00
Dwight Engen
85b0c6e62c sunvdc: don't call VD_OP_GET_VTOC
The VD_OP_GET_VTOC operation will succeed only if the vdisk backend has a
VTOC label, otherwise it will fail. In particular, it will return error
48 (ENOTSUP) if the disk has an EFI label. VTOC disk labels are already
handled by directly reading the disk in block/partitions/sun.c (enabled by
CONFIG_SUN_PARTITION which defaults to y on SPARC). Since port->label is
unused in the driver, remove the call and the field.

Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-31 15:49:45 -04:00
Pravin B Shelar
de05c400f7 mpls: Allow mpls_gso to be built as module
Kconfig already allows mpls to be built as module. Following patch
fixes Makefile to do same.

CC: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-31 15:47:21 -04:00
Pravin B Shelar
f7065f4bd3 mpls: Fix mpls_gso handler.
mpls gso handler needs to pull skb after segmenting skb.

CC: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-31 15:47:21 -04:00
Linus Torvalds
aea4869f68 Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fixes from Ingo Molnar:
 "The tree contains two RCU fixes and a compiler quirk comment fix"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rcu: Make rcu_barrier() understand about missing rcuo kthreads
  compiler/gcc4+: Remove inaccurate comment about 'asm goto' miscompiles
  rcu: More on deadlock between CPU hotplug and expedited grace periods
2014-10-31 12:43:52 -07:00
Mark Brown
194dbaefa0 regulator: Lower priority of constraint logging
Some systems have very large numbers of regulators so the constraint
logging done at startup can end up being a very big part of the boot
output which is both verbose and slows things down if the console is
a serial console. Lower to dev_dbg() instead, we may want to provide
a boot parameter to raise this in future but for now people can edit
the source.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2014-10-31 19:35:58 +00:00
Linus Torvalds
0f4b06766b Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
 "As you requested in the rc2 release mail the timer department serves
  you a few real bug fixes:

   - Fix the probe logic of the architected arm/arm64 timer
   - Plug a stack info leak in posix-timers
   - Prevent a shift out of bounds issue in the clockevents core"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ARM/ARM64: arch-timer: fix arch_timer_probed logic
  clockevents: Prevent shift out of bounds
  posix-timers: Fix stack info leak in timer_create()
2014-10-31 12:33:05 -07:00
Linus Torvalds
bcdfdaee5a ARM has system calls outside the NR_syscalls range, and the generic
tracing system does not support that and without checks, it can cause
 an oops to be reported.
 
 Rabin Vincent added checks in the return code on syscall events to make
 sure that the system call number is within the range that tracing
 knows about, and if not, simply ignores the system call.
 
 The system call tracing infrastructure needs to be rewritten to handle these
 cases better, but for now, to keep from oopsing, this patch will do.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUUt+4AAoJEEjnJuOKh9ld3HgH/0RL7neY1tp05+v0GRvABmGr
 6T47GEmZi9NiQOWjFC4SxNHLQSjpQX7eLD2CC6bljDfFpgKiIqarWHegEBUoBF9K
 Dlg2jPpCwwwKbTXlAKTmv9QTGzvBEYyVZxhSC7mEbziV4Rbt7CVZJlogVdeYP5y0
 4mWyHJg11Dt9SiZJCIv8sIrx2Xka2eX+Aq30dwYd9JGco3vVCH8NZ09ZgYBHaxIm
 YrL6yUVnHP3nqKiEL4qCMUqUzexzdwUhrGPddLANaSRTWT+EAGYPD113bA76jAKc
 cd3eaFwFkmCA0yfmjjBSb23FsPvKHc7j6BtZA6Q3uKPZUVlX+DyVNisUfEnaLQs=
 =9NTR
 -----END PGP SIGNATURE-----

Merge tag 'trace-fixes-v3.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fix from Steven Rostedt:
 "ARM has system calls outside the NR_syscalls range, and the generic
  tracing system does not support that and without checks, it can cause
  an oops to be reported.

  Rabin Vincent added checks in the return code on syscall events to
  make sure that the system call number is within the range that tracing
  knows about, and if not, simply ignores the system call.

  The system call tracing infrastructure needs to be rewritten to handle
  these cases better, but for now, to keep from oopsing, this patch will
  do"

* tag 'trace-fixes-v3.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing/syscalls: Ignore numbers outside NR_syscalls' range
2014-10-31 12:28:38 -07:00
Randy Dunlap
e894beb818 ASoC: cs42l51: depends on I2C
Fix build errors when CONFIG_I2C is not enabled by making the
driver depend on I2C.

../sound/soc/codecs/cs42l51-i2c.c:55:1: warning: data definition has no type or storage class [enabled by default]
 module_i2c_driver(cs42l51_i2c_driver);
 ^
../sound/soc/codecs/cs42l51-i2c.c:55:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int]
../sound/soc/codecs/cs42l51-i2c.c:55:1: warning: parameter names (without types) in function declaration [enabled by default]
../sound/soc/codecs/cs42l51-i2c.c:45:26: warning: 'cs42l51_i2c_driver' defined but not used [-Wunused-variable]
 static struct i2c_driver cs42l51_i2c_driver = {
                          ^

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31 19:25:38 +00:00
Linus Torvalds
4f080f05e6 Merge tag 'docs-for-linus' of git://git.lwn.net/linux-2.6
Pull documentation fixes from Jonathan Corbet:
 "So this is my first pull request since I rashly agreed to look after
  the documentation subtree.  It contains some typo fixes, a few minor
  documentation improvements, and, most importantly, fixes for a couple
  of build problems in various bits of sample code.

  I fully intend to start sending pull requests with signed tags.
  However, due to poor planning on my part and the general obnoxiousness
  of life, I'm 2000 miles away from my private key which is sitting on a
  powered-down machine.  This should be fixed before my next request.

  Meanwhile git.lwn.net is a machine under my control, the patches are
  all trivial, and all have done time in linux-next"

* tag 'docs-for-linus' of git://git.lwn.net/linux-2.6:
  Documentation/SubmittingPatches: Reported-by tags and permission
  Documentation: remove outdated references to the linux-next wiki
  Documentation: Restrict TSC test code to x86
  doc: kernel-parameters.txt: Add ide-generic.probe-mask
  vdso: don't require 64-bit math in standalone test
  Documentation: Add CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF case
  Documentation: Add default kmemleak off case in kernel-parameters.txt
  Docs: Document that the sticky bit is understood by hugetlbfs
  DocBook: Reduce noise from make cleandocs
  Documentation: fix vdso_standalone_test_x86 on 32-bit
  Documentation: dt-bindings: Explain order in patch series
  Documentation/ABI/testing/sysfs-ibft: fix a typo
2014-10-31 11:55:40 -07:00
Krzysztof Kozlowski
f32fa89ca9 regulator: Staticize 'regulator_states' array
The 'regulator_states' array is used only in this unit and it is not
exported. Make it static.

This also fixes following sparse warning:
drivers/regulator/of_regulator.c:22:12: warning: symbol 'regulator_states' was not declared. Should it be static?

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31 18:13:38 +00:00
hayeswang
d59c876dd6 r8152: stop submitting intr for -EPROTO
For Renesas USB 3.0 host controller, when unplugging the usb hub which
has the RTL8153 plugged, the driver would get -EPROTO for interrupt
transfer. There is high probability to get the information of "HC died;
cleaning up", if the driver continues to submit the interrupt transfer
before the disconnect() is called.

[ 1024.197678] r8152 9-1.4:1.0 eth0: intr status -71
[ 1024.213673] r8152 9-1.4:1.0 eth0: intr status -71
[ 1024.229668] r8152 9-1.4:1.0 eth0: intr status -71
[ 1024.245661] r8152 9-1.4:1.0 eth0: intr status -71
[ 1024.261653] r8152 9-1.4:1.0 eth0: intr status -71
[ 1024.277648] r8152 9-1.4:1.0 eth0: intr status -71
[ 1024.293642] r8152 9-1.4:1.0 eth0: intr status -71
[ 1024.309638] r8152 9-1.4:1.0 eth0: intr status -71
[ 1024.325633] r8152 9-1.4:1.0 eth0: intr status -71
[ 1024.341627] r8152 9-1.4:1.0 eth0: intr status -71
[ 1024.357621] r8152 9-1.4:1.0 eth0: intr status -71
[ 1024.373615] r8152 9-1.4:1.0 eth0: intr status -71
[ 1024.383097] usb 9-1: USB disconnect, device number 2
[ 1024.383103] usb 9-1.4: USB disconnect, device number 6
[ 1029.391010] xhci_hcd 0000:04:00.0: xHCI host not responding to stop endpoint command.
[ 1029.391016] xhci_hcd 0000:04:00.0: Assuming host is dying, halting host.
[ 1029.392551] xhci_hcd 0000:04:00.0: HC died; cleaning up
[ 1029.421480] usb 8-1: USB disconnect, device number 2

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-31 13:55:10 -04:00
Loic Poulain
b509c02d0f Bluetooth: HCI H5 peer reset detection
H5 Specification says:
If a SYNC message is received while in the Active State, it is
assumed that the peer device has reset. The local device should
therefore perform a full reset of the upper stack, and start Link
Establishment again at the Uninitialized State. Upon entering the
Active State, the first packet sent shall have its SEQ and ACK
numbers set to zero.

This patch resets the HCI H5 driver data/state to unitialized and
reports an HCI hardware error event to notify the upper stack that
HCI synchronization has been lost. H5 will be re-synchronized and
upper stack should generate an HCI Reset command.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-10-31 19:54:34 +02:00
Damien Lespiau
ba8ce31f43 drm/gma500: Don't destroy DRM properties in the driver
When drm properties are created, they are added to mode_config.property_list
which is then used in drm_mode_config_cleanup() to destroy every single
property created by the driver.

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-31 18:38:21 +01:00
Damien Lespiau
9d5fab402d drm/i915: Don't destroy DRM properties in the driver
When drm properties are created, they are added to mode_config.property_list,
which is then used in drm_mode_config_cleanup() to destroy every single
property created by the driver.

Cc: Chandra Konduru <chandra.konduru@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-31 18:38:17 +01:00
Damien Lespiau
3b5b9932fb drm: Add a note to drm_property_create() about property lifetime
Cc: Chandra Konduru <chandra.konduru@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-31 18:38:13 +01:00
Lars-Peter Clausen
5bc39b50fd ASoC: wm9713: Use virtual control instead of virtual register
The wm9713 currently implements the virtual control for the Mic B Source MUX
using a virtual register. Replace this by using SOC_ENUM_SINGLE_VIRT().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31 17:34:04 +00:00
Lars-Peter Clausen
5efe89d952 ASoC: wm9713: Move driver state struct allocation to driver probe
Resources for the device should be allocated in the device driver probe
callback, rather than in the ASoC CODEC probe callback.

E.g. one advantage is that we can use device managed allocations.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31 17:34:00 +00:00
Lars-Peter Clausen
c1359ca303 ASoC: wm9713: Use table based control setup
Makes the code a bit cleaner.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31 17:33:58 +00:00
Lars-Peter Clausen
a6c2b07f11 ASoC: wm9713: Cleanup printk usage
Use dev_err()/dev_warn() instead of printk(KERN_ERR/KERN_WARNING. This is
common practice and makes it easy to find out which device generated the
message. While we are at it also align the error messages with the other
AC'97 drivers.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31 17:33:54 +00:00
Lars-Peter Clausen
9a812c6b7a ASoC: wm9712: Use table based control setup
Makes the code a bit cleaner.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31 17:32:07 +00:00
Lars-Peter Clausen
12ced338ab ASoC: wm9712: Cleanup printk usage
Use dev_err() instead of printk(KERN_ERR. This is common practice and makes
it easy to find out which device generated the message. While we are at it
also align the error messages with the other AC'97 drivers.

Also avoid printing two error messages when the reset fails.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31 17:32:03 +00:00
Lars-Peter Clausen
d7cabb08ba ASoC: wm9705: Use table based control setup
Makes the code a bit cleaner.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31 17:31:39 +00:00
Lars-Peter Clausen
9cf766f666 ASoC: wm9705: Cleanup printk usage
Use dev_err() instead of printk(KERN_ERR. This is common practice and makes
it easy to find out which device generated the message. While we are at it
also align the error messages with the other AC'97 drivers.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31 17:31:16 +00:00
Lars-Peter Clausen
8865051d99 ASoC: stac9766: Use table based control setup
Makes the code a bit cleaner.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31 17:20:19 +00:00
Lars-Peter Clausen
93932abaa3 ASoC: stac9766: Cleanup printk usage
Use dev_err() instead of printk(KERN_ERR. This is common practice and makes
it easy to find out which device generated the message. While we are at it
also align the error messages with the other AC'97 drivers.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31 17:20:19 +00:00
Lars-Peter Clausen
6ce13d61dc ASoC: ad1980: Use table based control setup
Makes the code a bit cleaner.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31 17:18:50 +00:00
Lars-Peter Clausen
e5adb6cddb ASoC: ad1980: Cleanup printk usage
Use dev_err()/dev_warn() instead of printk(KERN_ERR/KERN_WARNING. This is
common practice and makes it easy to find out which device generated the
message. While we are at it also align the error messages with the other
AC'97 drivers.

Also remove the info message that is printed when the driver is probed, this
is just noise in bootlog.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31 17:18:35 +00:00
Lars-Peter Clausen
16af0ee16c ASoC: ad1980: Remove unused header
The constants defined in the ad1980 header are not used. So remove the file.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31 17:18:35 +00:00
Jie Yang
c1e99c913b ASoC: Intel: Add jack detection for Broadwell
Add jack dectection and event reporting for Broadwell. It use combo
jack on BDW platform, which including Mic Jack pin and Headphone
jack pin.

Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31 16:59:41 +00:00
Subhransu S. Prusty
7fb73c74ff ASoC: Intel: more probe modularization for sst
Move the PCI BAR and resource initialization to a separate routine

Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31 16:57:33 +00:00
Subhransu S. Prusty
250454d8fe ASoC: Intel: modularize driver probe and remove
The driver probe which initializes driver and remove which cleans up can be
shared with APCI as well, so move them to common init_context and
cleanup_context routines which can be used by ACPI as well

Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31 16:57:32 +00:00