Commit graph

505,617 commits

Author SHA1 Message Date
Takashi Iwai
f213d8f79a ALSA: pcm: Use static inline for snd_pcm_lib_alloc_vmalloc_buffer()
... instead of #if 0 hack.  It's more straightforward and obvious.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30 13:48:29 +01:00
Behan Webster
61110fbab1 [media] ti-fpe: LLVMLinux: Remove nested function from ti-vpe
Replace the use of nested functions where a normal function will suffice.

Nested functions are not liked by upstream kernel developers in general. Their
use breaks the use of clang as a compiler, and doesn't make the code any
better.

This code now works for both gcc and clang.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Behan Webster <behanw@converseincode.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30 10:46:17 -02:00
Takashi Iwai
12cddbd869 ALSA: control: Add missing kerneldoc comments to exported functions
A few functions have no proper documentation yet, so let's add them.
Along with it, remove superfluous blank line between the closing brace
and EXPORT_SYMBOL() line.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30 13:44:34 +01:00
Aravind Gopalakrishnan
a597d2a5d9 amd64_edac: Add F15h M60h support
This patch adds support for ECC error decoding for F15h M60h processor.
Aside from the usual changes, the patch adds support for some new features
in the processor:
 - DDR4(unbuffered, registered); LRDIMM DDR3 support
   - relevant debug messages have been modified/added to report these
     memory types
 - new dbam_to_cs mappers
   - if (F15h M60h && LRDIMM); we need a 'multiplier' value to find
     cs_size. This multiplier value is obtained from the per-dimm
     DCSM register. So, change the interface to accept a 'cs_mask_nr'
     value to facilitate this calculation
 - switch-casing determine_memory_type()
   - done to cleanse the function of too many if-else statements
     and improve readability
   - This is now called early in read_mc_regs() to cache dram_type

Misc cleanup:
 - amd64_pci_table[] is condensed by using PCI_VDEVICE macro.

Testing details:
Tested the patch by injecting 'ECC' type errors using mce_amd_inj
and error decoding works fine.

Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Link: http://lkml.kernel.org/r/1414617483-4941-1-git-send-email-Aravind.Gopalakrishnan@amd.com
[ Boris: determine_memory_type() cleanups ]
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-10-30 13:42:48 +01:00
Mark Rutland
af66abfe2e arm: perf: fold hotplug notifier into arm_pmu
Handling multiple PMUs using a single hotplug notifier requires a list
of PMUs to be maintained, with synchronisation in the probe, remove, and
notify paths. This is error-prone and makes the code much harder to
maintain.

Instead of using a single notifier, we can dynamically allocate a
notifier block per-PMU. The end result is the same, but the list of PMUs
is implicit in the hotplug notifier list rather than within a perf-local
data structure, which makes the code far easier to handle.

Signed-off-by: Mark Rutland <mark.rutland at arm.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-10-30 12:17:01 +00:00
Mark Rutland
abdf655a30 arm: perf: dynamically allocate cpu hardware data
To support multiple PMUs, each PMU will need its own accounting data.
As we don't know how (in general) many PMUs we'll have to support at
compile-time, we must allocate the data at runtime dynamically

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-10-30 12:17:00 +00:00
Mark Rutland
5ebd920034 arm: perf: fold percpu_pmu into pmu_hw_events
Currently the percpu_pmu pointers used as percpu_irq dev_id values are
defined separately from the other per-cpu accounting data, which make
dynamically allocating the data (as will be required for systems with
heterogeneous CPUs) difficult.

This patch moves the percpu_pmu pointers into pmu_hw_events (which is
itself allocated per cpu), which will allow for easier dynamic
allocation. Both percpu and regular irqs are requested using percpu_pmu
pointers as tokens, freeing us from having to know whether an irq is
percpu within the handler, and thus avoiding a radix tree lookup on the
handler path.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Tested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-10-30 12:17:00 +00:00
Mark Rutland
1167925086 arm: perf: kill get_hw_events()
Now that the arm pmu code is limited to CPU PMUs the get_hw_events()
function is superfluous, as we'll always have a set of per-cpu
pmu_hw_events structures.

This patch removes the get_hw_events() function, replacing it with
a percpu hw_events pointer. Uses of get_hw_events are updated to use
this_cpu_ptr.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-10-30 12:17:00 +00:00
Mark Rutland
a4560846eb arm: perf: limit size of accounting data
Commit 3fc2c83087 (ARM: perf: remove event limit from pmu_hw_events) got
rid of the upper limit on the number of events an arm_pmu could handle,
but introduced additional complexity and places a burden on each PMU
driver to allocate accounting data somehow. So far this has not
generally been useful as the only users of arm_pmu are the CPU backend
and the CCI driver.

Now that the CCI driver plugs into the perf subsystem directly, we can
remove some of the complexities that get in the way of supporting
heterogeneous CPU PMUs.

This patch restores the original limits on pmu_hw_events fields such
that the pmu_hw_events data can be allocated as a contiguous block. This
will simplify dynamic pmu_hw_events allocation in later patches.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Tested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-10-30 12:16:59 +00:00
Mark Rutland
67b4305aab arm: perf: use IDR types for CPU PMUs
For systems with heterogeneous CPUs (e.g. big.LITTLE systems) the PMUs
can be different in each cluster, and not all events can be migrated
between clusters. To allow userspace to deal with this, it must be
possible to address each PMU independently.

This patch changes PMUs to be registered with dynamic (IDR) types,
allowing them to be targeted individually. Each PMU's type can be found
in ${SYSFS_ROOT}/bus/event_source/devices/${PMU_NAME}/type.

From userspace, raw events can be targeted at a specific PMU:
$ perf stat -e ${PMU_NAME}/config=V,config1=V1,.../

Doing this does not break existing tools which use existing perf types:
when perf core can't find a PMU of matching type (in perf_init_event)
it'll iterate over the set of all PMUs. If a compatible PMU exists,
it'll be found eventually. If more than one compatible PMU exists, the
event will be handled by whichever PMU happens to be earlier in the pmus
list (which currently will be the last compatible PMU registered).

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-10-30 12:16:59 +00:00
Mark Rutland
548a86cae4 arm: perf: make PMU probing data-driven
The current PMU probing logic consists of a single switch statement,
which means that the core arm_pmu core in perf_event_cpu.c needs to know
about every CPU PMU variant supported by a driver using the arm_pmu
framework. This makes it rather difficult to decouple the drivers from
the (otherwise generic) probing code.

The patch refactors that switch statement to a table-driven lookup,
separating the logic and knowledge (in the form of the table). Later
patches will split the table across the relevant PMU drivers, which can
pass their tables to the generic probing function.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-10-30 12:16:59 +00:00
Mark Rutland
0f2a21018a arm: perf: add missing pr_info newlines
Most of the pr_info format strings in perf_event_cpu.c are missing
newlines. Currently we get away with this as the format strings for
subsequent calls to printk (including all pr_* calls) begin with a log
prefix, and the printk core adds the omitted newline for this case.
While generates the output we expect, we probably should not rely on the
format of successive printk calls in order to get legible output.

This patch adds the missing newlines to pr_info format strings in
perf_event_cpu.c, making them consistent with the format strings for
other pr_info, warn, and pr_err calls, and preventing potentially
illegible output if the next printk/pr_* format string doesn't begin
with a log prefix.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-10-30 12:16:59 +00:00
Mark Rutland
d39976f0fd arm: perf: factor out callchain code
The ARM callchain handling code is currently bundled with the ARM PMU
management code, despite the two having no dependency on each other.
This bundling has the unfortunate property of making callchain handling
depend on CONFIG_HW_PERF_EVENTS, even though the callchain handling
could be applied to software events in the absence of PMU hardware
support.

This patch separates the two, placing the callchain handling in
perf_callchain.c and making it depend on CONFIG_PERF_EVENTS rather than
CONFIG_HW_PERF_EVENTS, enabling callchain recording on kernels built
without hardware perf event support.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-10-30 12:16:58 +00:00
Will Deacon
52a5566e76 ARM: perf: use pr_* instead of printk
There are a few remaining uses of printk in the ARM perf code, so move
them over to the pr_* variants instead.

Reported-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-10-30 12:16:58 +00:00
chai wen
cb6eb108a7 ARM: perf: remove useless return and check of idx in counter handling
Idx sanity check was once implemented separately in these counter
handling functions and then return value was treated as a judgement.
	armv7_pmnc_select_counter()
	armv7_pmnc_enable_counter()
	armv7_pmnc_disable_counter()
	armv7_pmnc_enable_intens()
	armv7_pmnc_disable_intens()
But we do not need to do this now, as idx validation check was moved
out all these functions by commit 7279adbd9bb8ef8f(ARM: perf: check ARMv7
counter validity on a per-pmu basis).
Let's remove the useless return of idx from these functions.

Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: chai wen <chaiw.fnst@cn.fujitsu.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-10-30 12:16:58 +00:00
Mark Rutland
c6f85cb430 bus: cci: move away from arm_pmu framework
The ARM CPU PMUs and the ARM CCI PMU are using the same framework
despite being substantially different in programming model, which makes
it difficult to handle either particularly well.

This patch migrates the ARM CCI PMU driver away from the arm_pmu
framework, matching the style of the CCN PMU driver and other 'uncore'
PMU drivers. This will enable refactoring of the arm_pmu framework to
better support CPU PMUs. Event context migration on hotplug is not yet
added due to a race on event->ctx in the core perf code.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Punit Agrawal <punit.agrawal@arm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
[will: fix whitespace issues]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-10-30 12:16:57 +00:00
Emil Tantilov
e3215f0ac7 ixgbe: fix race when setting advertised speed
Following commands:

modprobe ixgbe
ifconfig ethX up
ethtool -s ethX advertise 0x020

can lead to "setup link failed with code -14" error due to the setup_link
call racing with the SFP detection routine in the watchdog.

This patch resolves this issue by protecting the setup_link call with check
for __IXGBE_IN_SFP_INIT.

Reported-by: Scott Harrison <scoharr2@cisco.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-30 05:12:07 -07:00
Junwei Zhang
4d2fcfbcf8 ixgbe: need not repeat init skb with NULL
Signed-off-by: Martin Zhang <martinbj2008@gmail.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-30 05:04:39 -07:00
Roman Gushchin
bc16e47f03 igb: don't reuse pages with pfmemalloc flag
Incoming packet is dropped silently by sk_filter(), if the skb was
allocated from pfmemalloc reserves and the corresponding socket is
not marked with the SOCK_MEMALLOC flag.

Igb driver allocates pages for DMA with __skb_alloc_page(), which
calls alloc_pages_node() with the __GFP_MEMALLOC flag. So, in case
of OOM condition, igb can get pages with pfmemalloc flag set.

If an incoming packet hits the pfmemalloc page and is large enough
(small packets are copying into the memory, allocated with
netdev_alloc_skb_ip_align(), so they are not affected), it will be
dropped.

This behavior is ok under high memory pressure, but the problem is
that the igb driver reuses these mapped pages. So, packets are still
dropping even if all memory issues are gone and there is a plenty
of free memory.

In my case, some TCP sessions hang on a small percentage (< 0.1%)
of machines days after OOMs.

Fix this by avoiding reuse of such pages.

Signed-off-by: Roman Gushchin <klamm@yandex-team.ru>
Tested-by: Aaron Brown "aaron.f.brown@intel.com"
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-30 04:56:52 -07:00
Francesco Ruggeri
a22bb0b9b9 e1000: unset IFF_UNICAST_FLT on WMware 82545EM
VMWare's e1000 implementation does not seem to support unicast filtering.
This can be observed by configuring a macvlan interface on eth0 in a VM in
VMWare Fusion 5.0.5, and trying to use that interface instead of eth0.
Tested on 3.16.

Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-30 04:47:39 -07:00
Takashi Iwai
438f4e2801 ALSA: doc: Add ASoC codes into API documentation
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30 12:44:00 +01:00
Mauro Carvalho Chehab
678fa12fb8 [media] sound: Update au0828 quirks table
The au0828 quirks table is currently not in sync with the au0828
media driver.

Syncronize it and put them on the same order as found at au0828
driver, as all the au0828 devices with analog TV need the
same quirks.

Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30 09:24:20 -02:00
Mauro Carvalho Chehab
5d1f00a20d [media] sound: simplify au0828 quirk table
Add a macro to simplify au0828 quirk table. That makes easier
to check it against the USB IDs at drivers/media/usb/au0828/au0828-cards.c.

Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30 09:23:57 -02:00
Mauro Carvalho Chehab
cef8348334 [media] rc5-decoder: BZ#85721: Fix RC5-SZ decoding
Changeset e87b540be2 broke RC5-SZ decoding, as it forgot to add
the extra bit check for the enabled protocols at the beginning of
the logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30 09:09:28 -02:00
Tomas Melin
14edb59333 [media] rc-core: fix protocol_change regression in ir_raw_event_register
IR receiver using nuvoton-cir and lirc required additional configuration
steps after upgrade from kernel 3.16 to 3.17-rcX. Bisected regression to
commit da6e162d6a ("[media] rc-core:
simplify sysfs code").

The regression comes from adding function change_protocol in ir-raw.c.
It changes behaviour so that only the protocol enabled by driver's
map_name will be active after registration. This breaks user space
behaviour, lirc does not get key press signals anymore.

Enable lirc protocol by default for ir raw decoders to restore original
behaviour.

Cc: stable@vger.kernel.org # for v3.17
Signed-off-by: Tomas Melin <tomas.melin@iki.fi>
Acked-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30 09:09:28 -02:00
Olli Salonen
0d1165fcaf [media] si2157: add support for SYS_DVBC_ANNEX_B
Set the property for delivery system also in case of SYS_DVBC_ANNEX_B.
This behaviour is observed in the sniffs taken with Hauppauge HVR-955Q
Windows driver.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30 09:06:28 -02:00
Mauro Carvalho Chehab
1b07a77f6e [media] em28xx-dvb: remove unused mfe_sharing
This field is not used on this driver anymore. Remove it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30 09:06:27 -02:00
Mauro Carvalho Chehab
52ee29fe94 [media] drxk: Fix debug printks
This patch partially reverts 0fb220f2a5. What happened is
that the conversion of debug messages to use pr_debug() was a
bad idea, because one needing to debug would need to both
enable debug level via a modprobe parameter, and then to
enable the dynamic printk's.

So, for now, let's use printk() directly at dprintk().

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30 09:06:27 -02:00
Mauro Carvalho Chehab
a47959fbd5 [media] Documentation: FE_SET_PROPERTY requires R/W
FE_SET_PROPERTY requires to open the devnode on R/W mode, or
otherwise it will fail. Document it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30 09:06:23 -02:00
Takashi Iwai
dda42bd0c3 ALSA: hda - Add kerneldoc comments to hda_generic.c
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30 12:04:50 +01:00
Mauro Carvalho Chehab
986f168644 [media] dib7000p: get rid of an unused argument
dib7000p is for DVB, and not ISDB. So, there's no layer.

That removes this compilation warning:
	drivers/media/dvb-frontends/dib7000p.c:1972: warning: 'i' is used uninitialized in this function

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30 08:12:58 -02:00
Jan Kara
a8d4205623 rbd: Fix error recovery in rbd_obj_read_sync()
When we fail to allocate page vector in rbd_obj_read_sync() we just
basically ignore the problem and continue which will result in an oops
later. Fix the problem by returning proper error.

CC: Yehuda Sadeh <yehuda@inktank.com>
CC: Sage Weil <sage@inktank.com>
CC: ceph-devel@vger.kernel.org
CC: stable@vger.kernel.org
Coverity-id: 1226882
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
2014-10-30 13:11:51 +03:00
Mike Christie
89baaa570a libceph: use memalloc flags for net IO
This patch has ceph's lib code use the memalloc flags.

If the VM layer needs to write data out to free up memory to handle new
allocation requests, the block layer must be able to make forward progress.
To handle that requirement we use structs like mempools to reserve memory for
objects like bios and requests.

The problem is when we send/receive block layer requests over the network
layer, net skb allocations can fail and the system can lock up.
To solve this, the memalloc related flags were added. NBD, iSCSI
and NFS uses these flags to tell the network/vm layer that it should
use memory reserves to fullfill allcation requests for structs like
skbs.

I am running ceph in a bunch of VMs in my laptop, so this patch was
not tested very harshly.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Ilya Dryomov <idryomov@redhat.com>
2014-10-30 13:11:50 +03:00
Ilya Dryomov
f5ee37bd31 rbd: use a single workqueue for all devices
Using one queue per device doesn't make much sense given that our
workfn processes "devices" and not "requests".  Switch to a single
workqueue for all devices.

Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-30 13:11:25 +03:00
Kailang Yang
1df8874bfa ALSA: hda/realtek - Update Initial AMP for EAPD control
The default EAPD control uses verb command to control EAPD. Some codec
does not have verb command for EAPD. It needs to control by hidden
register.

This update will avoid wrong behavior for some codec.  This patch will
fix double setup for EAPD.  It just needs to turn on by one site for
verb command or hidden register controlled.

Detailed changes:
- alc889_coef_init() is replaced with alc_update_coef_idx() with a
  correct COEF value.
- for ALC262, ALC887 and ALC900, the EAPD setup via the hidden
  register is removed because this rather conflicts with the EAPD verb
  setup.
-  For ALC888-VC, also the hidden register access is removed in
  alc888_coef_init().
- Remove the dead #if 0 code for ALC267/ALC268.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30 09:01:17 +01:00
David Henningsson
cf51eb9d0c ALSA: hda - change three SSID quirks to one pin quirk
These three HP machines all have the same pin config, so we can
change it to a pin quirk.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30 08:59:53 +01:00
David Henningsson
7a5255f17d ALSA: hda - Set GPIO 4 low for a few HP machines
These HP machines needs GPIO 4 low to enable the headphone amplifier.
In addition, we still need to control LEDs via vref and GPIO.

Cc: stable@vger.kernel.org
BugLink: https://bugs.launchpad.net/bugs/1387128
Tested-by: TienFu Chen <tienfu.chen@canonical.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30 08:59:52 +01:00
Takashi Iwai
ce40a6d3ad Merge branch 'topic/kerneldoc' into for-next 2014-10-30 08:05:12 +01:00
Tina Ruchandani
eafe8404c1 ALSA: es1968: Replace timeval with ktime_t
es1968_measure_clock uses struct timeval, which on 32-bit systems will overflow
in 2038, leading to incorrect interpretation of time.This patch changes the
function to use ktime_t instead of struct timeval, which implies:
- no y2038: ktime_t uses a 64-bit datatype explicitly.
- efficent subtraction: The earlier version computes the difference in usecs
  while dealing with secs and nsecs. It requires checks to see if the nsecs of
  stop is less than start. This patch uses a direct subtract of ktime_t and
  converts to usecs.
- use of monotonic clock (ktime_get) over real time (do_gettimeofday),
  which simplifies timekeeping, as it does not have to deal with cases
  where stop_time is less than start_time.

Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30 08:04:33 +01:00
Lukas Bossard
7c21539c45 ALSA: hda - Add ultra dock support for Thinkpad X240.
Adding ultra doch support for Lenovo Thinkpad X240 (17aa:2214).
[Actually replaced the entry with ALC292_FIXUP_TPT440_DOCK -- tiwai]

Signed-off-by: Lukas Bossard <mr.bobukas@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30 08:03:29 +01:00
Ingo Molnar
21ee24bf5b Merge branch 'urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/urgent
Pull two RCU fixes from Paul E. McKenney:

" - Complete the work of commit dd56af42bd (rcu: Eliminate deadlock
    between CPU hotplug and expedited grace periods), which was
    intended to allow synchronize_sched_expedited() to be safely
    used when holding locks acquired by CPU-hotplug notifiers.
    This commit makes the put_online_cpus() avoid the deadlock
    instead of just handling the get_online_cpus().

  - Complete the work of commit 35ce7f29a4 (rcu: Create rcuo
    kthreads only for onlined CPUs), which was intended to allow
    RCU to avoid allocating unneeded kthreads on systems where the
    firmware says that there are more CPUs than are really present.
    This commit makes rcu_barrier() aware of the mismatch, so that
    it doesn't hang waiting for non-existent CPUs. "

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-30 07:37:37 +01:00
Ingo Molnar
05b2537e8d perf/core improvements:
User visible:
 
 * Don't open the DWARF info multiple times, keeping instead a dwfl handle
   in struct dso, greatly speeding up 'perf report' on powerpc. (Sukadev Bhattiprolu)
 
 * Introduce PARSE_OPT_DISABLED option flag and use it to avoid showing
   undersired options in tools that provides frontends to 'perf record', like
   sched, kvm, etc (Namhyung Kim)
 
 Infrastructure:
 
 * More Intel PT work, including a facility to export sample data (comms,
   threads, symbol names, etc) in a database friendly way, with an script to use
   this to create a postgresql database. (Adrian Hunter)
 
 * Use make sure that thread->mg->machine points to the machine where
   the thread exists (it was being set only for the kmaps kernel modules
   case, do it as well for the mmaps) and use it to shorten function
   signatures (Arnaldo Carvalho de Melo)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUUPKlAAoJEBpxZoYYoA71idkIAJ4alldY2tX3l5jMWQsvq0Ee
 drmDtsZz7DOzEqbPvpeVACQHU/gzR2kZ39kL5oEEt2yfPESSDGZPX/pco7/2j+Bi
 668snPqVyEP5RH8T52kUlTRaFuPijk6QJ+uEn+SRa6cnM0+kG7AVZWj0i65lMrGA
 w0fQ0bz9TqxKgFGaqySxal9uoaEu0pr/prSsbAcX0//JITI2fbUtV58uZjkvAAu4
 Sk/iH4YiCbStRJ0nGHepe8DDSpw275ScL2VMN/YorIEOlcsXYcVGLlyyf1jFUzXP
 ikT8kYTb/zNcr+Fd5HM7+tG7Tv3iW7TeIvI1L0cY8zkX7QPyxiVv6xjaX4h0ve4=
 =oH//
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements from Arnaldo Carvalho de Melo:

User visible changes:

 - Don't open the DWARF info multiple times, keeping instead a dwfl handle
   in struct dso, greatly speeding up 'perf report' on powerpc. (Sukadev Bhattiprolu)

 - Introduce PARSE_OPT_DISABLED option flag and use it to avoid showing
   undersired options in tools that provides frontends to 'perf record', like
   sched, kvm, etc (Namhyung Kim)

Infrastructure changes:

 - More Intel PT work, including a facility to export sample data (comms,
   threads, symbol names, etc) in a database friendly way, with an script to use
   this to create a postgresql database. (Adrian Hunter)

 - Use make sure that thread->mg->machine points to the machine where
   the thread exists (it was being set only for the kmaps kernel modules
   case, do it as well for the mmaps) and use it to shorten function
   signatures (Arnaldo Carvalho de Melo)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-30 07:34:32 +01:00
Ingo Molnar
d785452c99 perf/urgent fixes:
User visible:
 
 * Fix report -F (abort, in_tx, mispredict, etc) segfaults for sample.data files
   without branch info (Jiri Olsa)
 
 * Add patch that should have went in a previous patchkit to use global cache
   provided by libunwind (Namhyung Kim)
 
 * Make CPUINFO_PROC an array to support different kernels, problem
   detected when the information reported via /proc/cpuinfo changed on ARM (Wang Nan)
 
 * 'perf probe' --demangle typo fix and a new --quiet option (Masami Hiramatsu)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUUOC5AAoJEBpxZoYYoA71wRYH/A5DhJq50X4KhHAr/RLcEn3T
 HNFUGrQKChuczZ11JM9dZiCHN8TXTdG2ql71SFXzAQ96TP7LwWVcHlAQQV7CIwQM
 jGFwSqPrDK2pD8EhQoOEChobGpNDAUPZclUUwCdw22cvoig0xdfjQjpNehAsxyzI
 jgl6wb6hF/lHuoYXFxijrV3RbGcnNVUCHnjyhKD6WTplq3EvT16hsLFaM9t/r/p/
 wL7wB5Sz8IUUSCWaq63u39spGwy+qH+bgZ9fyaccxCMhBPQ5+Eo9moHIfnjwuxbP
 d8l7pDnCMXGiaMO1Jt3BH1C3mQr3HNFCxxrgQOOLM9VVmxi5WPcmu945tC354uw=
 =Klbg
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

 - Fix report -F (abort, in_tx, mispredict, etc) segfaults for sample.data files
   without branch info (Jiri Olsa)

 - Add patch that should have went in a previous patchkit to use global cache
   provided by libunwind (Namhyung Kim)

 - Make CPUINFO_PROC an array to support different kernels, problem
   detected when the information reported via /proc/cpuinfo changed on ARM (Wang Nan)

 - 'perf probe' --demangle typo fix and a new --quiet option (Masami Hiramatsu)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-30 07:32:34 +01:00
Hari Bathini
408cddd96e powerpc/fadump: Fix endianess issues in firmware assisted dump handling
Firmware-assisted dump (fadump) kernel code is not endian safe. The
below patch fixes this issue. Tested this patch with upstream kernel.
Below output shows crash tool successfully opening LE fadump vmcore.

    # crash vmlinux vmcore
    GNU gdb (GDB) 7.6
    This GDB was configured as "powerpc64le-unknown-linux-gnu"...

          KERNEL: vmlinux
        DUMPFILE: vmcore
    	CPUS: 16
    	DATE: Wed Dec 31 19:00:00 1969
          UPTIME: 00:03:28
    LOAD AVERAGE: 0.46, 0.86, 0.41
           TASKS: 268
        NODENAME: linux-dhr2
         RELEASE: 3.17.0-rc5-7-default
         VERSION: #6 SMP Tue Sep 30 01:06:34 EDT 2014
         MACHINE: ppc64le  (4116 Mhz)
          MEMORY: 40 GB
           PANIC: "Oops: Kernel access of bad area, sig: 11 [#1]" (check log for details)
    	 PID: 6223
         COMMAND: "bash"
    	TASK: c0000009661b2500  [THREAD_INFO: c000000967ac0000]
    	 CPU: 2
           STATE: TASK_RUNNING (PANIC)

Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
[mpe: Make the comment in pSeries_lpar_hptab_clear() clearer]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-30 16:52:46 +11:00
Brian Norris
1f04a73e2c MTD: merge 3.18 development into -next development
To keep the two paths in sync
2014-10-29 18:56:26 -07:00
Dmitry Eremin-Solenikov
89cf38dd53 mtd: cfi_cmdset_0001.c: fix resume for LH28F640BF chips
After '#echo mem > /sys/power/state' some devices can not be properly resumed
because apparently the MTD Partition Configuration Register has been reset
to default thus the rootfs cannot be mounted cleanly on resume.
An example of this can be found in the SA-1100 Developer's Manual at 9.5.3.3
where the second step of the Sleep Shutdown Sequence is described:
"An internal reset is applied to the SA-1100. All units are reset...".

As workaround we refresh the PCR value as done initially on chip setup.

This behavior and the fix are confirmed by our tests done on 2 different Zaurus
collie units with kernel 3.17.

Fixes: 812c5fa82b: ("mtd: cfi_cmdset_0001.c: add support for Sharp LH28F640BF NOR")
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Cc: <stable@vger.kernel.org> # 3.16+
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-29 18:50:52 -07:00
Frans Klaver
0c53b4e7e2 mtd: omap: fix mtd devices not showing up
Since commit 6d178ef2fd ("mtd: nand: Move ELM driver and rename as
omap_elm"), I don't have any mtd devices present on my am335x. This
changes the link order of the omap_elm and omap2 objects, causing them
to probe in the wrong order.

To fix this, make elm_config defer probing until the omap_elm driver is
actually loaded.

Signed-off-by: Frans Klaver <frans.klaver@xsens.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-29 18:41:54 -07:00
Geert Uytterhoeven
76ddbdc301 ARM: shmobile: kzm9g-reference dts: Drop bogus 0x unit-address prefix
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-10-30 10:20:36 +09:00
Geert Uytterhoeven
6b83dc1d03 ARM: shmobile: r8a7791 dtsi: Drop bogus 0x unit-address prefix
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-10-30 10:20:32 +09:00
Geert Uytterhoeven
83b4fb6d90 ARM: shmobile: r8a7790 dtsi: Drop bogus 0x unit-address prefix
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-10-30 10:20:26 +09:00