Commit graph

505,617 commits

Author SHA1 Message Date
Matt Fleming
6d80dba1c9 efi: Provide a non-blocking SetVariable() operation
There are some circumstances that call for trying to write an EFI
variable in a non-blocking way. One such scenario is when writing pstore
data in efi_pstore_write() via the pstore_dump() kdump callback.

Now that we have an EFI runtime spinlock we need a way of aborting if
there is contention instead of spinning, since when writing pstore data
from the kdump callback, the runtime lock may already be held by the CPU
that's running the callback if we crashed in the middle of an EFI
variable operation.

The situation is sufficiently special that a new EFI variable operation
is warranted.

Introduce ->set_variable_nonblocking() for this use case. It is an
optional EFI backend operation, and need only be implemented by those
backends that usually acquire locks to serialize access to EFI
variables, as is the case for virt_efi_set_variable() where we now grab
the EFI runtime spinlock.

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-10-03 18:41:03 +01:00
Andre Müller
77e21e87ac x86/efi: Adding efi_printks on memory allocationa and pci.reads
All other calls to allocate memory seem to make some noise already, with the
exception of two calls (for gop, uga) in the setup_graphics path.

The purpose is to be noisy on worrysome errors immediately.

commit fb86b2440d ("x86/efi: Add better error logging to EFI boot
stub") introduces printing false alarms for lots of hardware. Rather
than playing Whack a Mole with non-fatal exit conditions, try the other
way round.

This is per Matt Fleming's suggestion:

> Where I think we could improve things
> is by adding efi_printk() message in certain error paths. Clearly, not
> all error paths need such messages, e.g. the EFI_INVALID_PARAMETER path
> you highlighted above, but it makes sense for memory allocation and PCI
> read failures.

Link: http://article.gmane.org/gmane.linux.kernel.efi/4628
Signed-off-by: Andre Müller <andre.muller@web.de>
Cc: Ulf Winkelvos <ulf@winkelvos.de>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-10-03 18:41:03 +01:00
Mathias Krause
4e78eb0561 x86/efi: Mark initialization code as such
The 32 bit and 64 bit implementations differ in their __init annotations
for some functions referenced from the common EFI code. Namely, the 32
bit variant is missing some of the __init annotations the 64 bit variant
has.

To solve the colliding annotations, mark the corresponding functions in
efi_32.c as initialization code, too -- as it is such.

Actually, quite a few more functions are only used during initialization
and therefore can be marked __init. They are therefore annotated, too.
Also add the __init annotation to the prototypes in the efi.h header so
users of those functions will see it's meant as initialization code
only.

This patch also fixes the "prelog" typo. ("prologue" / "epilogue" might
be more appropriate but this is C code after all, not an opera! :D)

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-10-03 18:41:03 +01:00
Mathias Krause
0ce4605c9a x86/efi: Update comment regarding required phys mapped EFI services
Commit 3f4a7836e3 ("x86/efi: Rip out phys_efi_get_time()") left
set_virtual_address_map as the only runtime service needed with a
phys mapping but missed to update the preceding comment. Fix that.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-10-03 18:41:02 +01:00
Mathias Krause
6092068547 x86/efi: Unexport add_efi_memmap variable
This variable was accidentally exported, even though it's only used in
this compilation unit and only during initialization.

Remove the bogus export, make the variable static instead and mark it
as __initdata.

Fixes: 200001eb14 ("x86 boot: only pick up additional EFI memmap...")
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-10-03 18:41:02 +01:00
Mathias Krause
24ffd84b60 x86/efi: Remove unused efi_call* macros
Complement commit 62fa6e69a4 ("x86/efi: Delete most of the efi_call*
macros") and delete the stub macros for the !CONFIG_EFI case, too. In
fact, there are no EFI calls in this case so we don't need a dummy for
efi_call() even.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-10-03 18:41:02 +01:00
Mark Rustad
b2fce819a8 efi: Resolve some shadow warnings
It is a really bad idea to declare variables or parameters that
have the same name as common types. It is valid C, but it gets
surprising if a macro expansion attempts to declare an inner
local with that type. Change the local names to eliminate the
hazard.

Change s16 => str16, s8 => str8.

This resolves warnings seen when using W=2 during make, for instance:

drivers/firmware/efi/vars.c: In function ‘dup_variable_bug’:
drivers/firmware/efi/vars.c:324:44: warning: declaration of ‘s16’ shadows a global declaration [-Wshadow]
 static void dup_variable_bug(efi_char16_t *s16, efi_guid_t *vendor_guid,

drivers/firmware/efi/vars.c:328:8: warning: declaration of ‘s8’ shadows a global declaration [-Wshadow]
  char *s8;

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-10-03 18:41:01 +01:00
Laszlo Ersek
65ba758f3e arm64: efi: Format EFI memory type & attrs with efi_md_typeattr_format()
An example log excerpt demonstrating the change:

Before the patch:

> Processing EFI memory map:
>   0x000040000000-0x000040000fff [Loader Data]
>   0x000040001000-0x00004007ffff [Conventional Memory]
>   0x000040080000-0x00004072afff [Loader Data]
>   0x00004072b000-0x00005fdfffff [Conventional Memory]
>   0x00005fe00000-0x00005fe0ffff [Loader Data]
>   0x00005fe10000-0x0000964e8fff [Conventional Memory]
>   0x0000964e9000-0x0000964e9fff [Loader Data]
>   0x0000964ea000-0x000096c52fff [Loader Code]
>   0x000096c53000-0x00009709dfff [Boot Code]*
>   0x00009709e000-0x0000970b3fff [Runtime Code]*
>   0x0000970b4000-0x0000970f4fff [Runtime Data]*
>   0x0000970f5000-0x000097117fff [Runtime Code]*
>   0x000097118000-0x000097199fff [Runtime Data]*
>   0x00009719a000-0x0000971dffff [Runtime Code]*
>   0x0000971e0000-0x0000997f8fff [Conventional Memory]
>   0x0000997f9000-0x0000998f1fff [Boot Data]*
>   0x0000998f2000-0x0000999eafff [Conventional Memory]
>   0x0000999eb000-0x00009af09fff [Boot Data]*
>   0x00009af0a000-0x00009af21fff [Conventional Memory]
>   0x00009af22000-0x00009af46fff [Boot Data]*
>   0x00009af47000-0x00009af5bfff [Conventional Memory]
>   0x00009af5c000-0x00009afe1fff [Boot Data]*
>   0x00009afe2000-0x00009afe2fff [Conventional Memory]
>   0x00009afe3000-0x00009c01ffff [Boot Data]*
>   0x00009c020000-0x00009efbffff [Conventional Memory]
>   0x00009efc0000-0x00009f14efff [Boot Code]*
>   0x00009f14f000-0x00009f162fff [Runtime Code]*
>   0x00009f163000-0x00009f194fff [Runtime Data]*
>   0x00009f195000-0x00009f197fff [Boot Data]*
>   0x00009f198000-0x00009f198fff [Runtime Data]*
>   0x00009f199000-0x00009f1acfff [Conventional Memory]
>   0x00009f1ad000-0x00009f1affff [Boot Data]*
>   0x00009f1b0000-0x00009f1b0fff [Runtime Data]*
>   0x00009f1b1000-0x00009fffffff [Boot Data]*
>   0x000004000000-0x000007ffffff [Memory Mapped I/O]
>   0x000009010000-0x000009010fff [Memory Mapped I/O]

After the patch:

> Processing EFI memory map:
>   0x000040000000-0x000040000fff [Loader Data        |   |  |  |  |   |WB|WT|WC|UC]
>   0x000040001000-0x00004007ffff [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC]
>   0x000040080000-0x00004072afff [Loader Data        |   |  |  |  |   |WB|WT|WC|UC]
>   0x00004072b000-0x00005fdfffff [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC]
>   0x00005fe00000-0x00005fe0ffff [Loader Data        |   |  |  |  |   |WB|WT|WC|UC]
>   0x00005fe10000-0x0000964e8fff [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC]
>   0x0000964e9000-0x0000964e9fff [Loader Data        |   |  |  |  |   |WB|WT|WC|UC]
>   0x0000964ea000-0x000096c52fff [Loader Code        |   |  |  |  |   |WB|WT|WC|UC]
>   0x000096c53000-0x00009709dfff [Boot Code          |   |  |  |  |   |WB|WT|WC|UC]*
>   0x00009709e000-0x0000970b3fff [Runtime Code       |RUN|  |  |  |   |WB|WT|WC|UC]*
>   0x0000970b4000-0x0000970f4fff [Runtime Data       |RUN|  |  |  |   |WB|WT|WC|UC]*
>   0x0000970f5000-0x000097117fff [Runtime Code       |RUN|  |  |  |   |WB|WT|WC|UC]*
>   0x000097118000-0x000097199fff [Runtime Data       |RUN|  |  |  |   |WB|WT|WC|UC]*
>   0x00009719a000-0x0000971dffff [Runtime Code       |RUN|  |  |  |   |WB|WT|WC|UC]*
>   0x0000971e0000-0x0000997f8fff [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC]
>   0x0000997f9000-0x0000998f1fff [Boot Data          |   |  |  |  |   |WB|WT|WC|UC]*
>   0x0000998f2000-0x0000999eafff [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC]
>   0x0000999eb000-0x00009af09fff [Boot Data          |   |  |  |  |   |WB|WT|WC|UC]*
>   0x00009af0a000-0x00009af21fff [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC]
>   0x00009af22000-0x00009af46fff [Boot Data          |   |  |  |  |   |WB|WT|WC|UC]*
>   0x00009af47000-0x00009af5bfff [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC]
>   0x00009af5c000-0x00009afe1fff [Boot Data          |   |  |  |  |   |WB|WT|WC|UC]*
>   0x00009afe2000-0x00009afe2fff [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC]
>   0x00009afe3000-0x00009c01ffff [Boot Data          |   |  |  |  |   |WB|WT|WC|UC]*
>   0x00009c020000-0x00009efbffff [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC]
>   0x00009efc0000-0x00009f14efff [Boot Code          |   |  |  |  |   |WB|WT|WC|UC]*
>   0x00009f14f000-0x00009f162fff [Runtime Code       |RUN|  |  |  |   |WB|WT|WC|UC]*
>   0x00009f163000-0x00009f194fff [Runtime Data       |RUN|  |  |  |   |WB|WT|WC|UC]*
>   0x00009f195000-0x00009f197fff [Boot Data          |   |  |  |  |   |WB|WT|WC|UC]*
>   0x00009f198000-0x00009f198fff [Runtime Data       |RUN|  |  |  |   |WB|WT|WC|UC]*
>   0x00009f199000-0x00009f1acfff [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC]
>   0x00009f1ad000-0x00009f1affff [Boot Data          |   |  |  |  |   |WB|WT|WC|UC]*
>   0x00009f1b0000-0x00009f1b0fff [Runtime Data       |RUN|  |  |  |   |WB|WT|WC|UC]*
>   0x00009f1b1000-0x00009fffffff [Boot Data          |   |  |  |  |   |WB|WT|WC|UC]*
>   0x000004000000-0x000007ffffff [Memory Mapped I/O  |RUN|  |  |  |   |  |  |  |UC]
>   0x000009010000-0x000009010fff [Memory Mapped I/O  |RUN|  |  |  |   |  |  |  |UC]

The attribute bitmap is now displayed, in decoded form.

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-10-03 18:41:01 +01:00
Laszlo Ersek
77b12bcfc5 ia64: efi: Format EFI memory type & attrs with efi_md_typeattr_format()
The effects of the patch on the i64 memory map log are similar to those
visible in the previous (x86) patch: the type enum and the attribute
bitmap are decoded.

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-10-03 18:41:01 +01:00
Laszlo Ersek
ace1d1218d x86: efi: Format EFI memory type & attrs with efi_md_typeattr_format()
An example log excerpt demonstrating the change:

Before the patch:

> efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x000000000009f000) (0MB)
> efi: mem01: type=2, attr=0xf, range=[0x000000000009f000-0x00000000000a0000) (0MB)
> efi: mem02: type=7, attr=0xf, range=[0x0000000000100000-0x0000000000400000) (3MB)
> efi: mem03: type=2, attr=0xf, range=[0x0000000000400000-0x0000000000800000) (4MB)
> efi: mem04: type=10, attr=0xf, range=[0x0000000000800000-0x0000000000808000) (0MB)
> efi: mem05: type=7, attr=0xf, range=[0x0000000000808000-0x0000000000810000) (0MB)
> efi: mem06: type=10, attr=0xf, range=[0x0000000000810000-0x0000000000900000) (0MB)
> efi: mem07: type=4, attr=0xf, range=[0x0000000000900000-0x0000000001100000) (8MB)
> efi: mem08: type=7, attr=0xf, range=[0x0000000001100000-0x0000000001400000) (3MB)
> efi: mem09: type=2, attr=0xf, range=[0x0000000001400000-0x0000000002613000) (18MB)
> efi: mem10: type=7, attr=0xf, range=[0x0000000002613000-0x0000000004000000) (25MB)
> efi: mem11: type=4, attr=0xf, range=[0x0000000004000000-0x0000000004020000) (0MB)
> efi: mem12: type=7, attr=0xf, range=[0x0000000004020000-0x00000000068ea000) (40MB)
> efi: mem13: type=2, attr=0xf, range=[0x00000000068ea000-0x00000000068f0000) (0MB)
> efi: mem14: type=3, attr=0xf, range=[0x00000000068f0000-0x0000000006c7b000) (3MB)
> efi: mem15: type=6, attr=0x800000000000000f, range=[0x0000000006c7b000-0x0000000006c7d000) (0MB)
> efi: mem16: type=5, attr=0x800000000000000f, range=[0x0000000006c7d000-0x0000000006c85000) (0MB)
> efi: mem17: type=6, attr=0x800000000000000f, range=[0x0000000006c85000-0x0000000006c87000) (0MB)
> efi: mem18: type=3, attr=0xf, range=[0x0000000006c87000-0x0000000006ca3000) (0MB)
> efi: mem19: type=6, attr=0x800000000000000f, range=[0x0000000006ca3000-0x0000000006ca6000) (0MB)
> efi: mem20: type=10, attr=0xf, range=[0x0000000006ca6000-0x0000000006cc6000) (0MB)
> efi: mem21: type=6, attr=0x800000000000000f, range=[0x0000000006cc6000-0x0000000006d95000) (0MB)
> efi: mem22: type=5, attr=0x800000000000000f, range=[0x0000000006d95000-0x0000000006e22000) (0MB)
> efi: mem23: type=7, attr=0xf, range=[0x0000000006e22000-0x0000000007165000) (3MB)
> efi: mem24: type=4, attr=0xf, range=[0x0000000007165000-0x0000000007d22000) (11MB)
> efi: mem25: type=7, attr=0xf, range=[0x0000000007d22000-0x0000000007d25000) (0MB)
> efi: mem26: type=3, attr=0xf, range=[0x0000000007d25000-0x0000000007ea2000) (1MB)
> efi: mem27: type=5, attr=0x800000000000000f, range=[0x0000000007ea2000-0x0000000007ed2000) (0MB)
> efi: mem28: type=6, attr=0x800000000000000f, range=[0x0000000007ed2000-0x0000000007ef6000) (0MB)
> efi: mem29: type=7, attr=0xf, range=[0x0000000007ef6000-0x0000000007f00000) (0MB)
> efi: mem30: type=9, attr=0xf, range=[0x0000000007f00000-0x0000000007f02000) (0MB)
> efi: mem31: type=10, attr=0xf, range=[0x0000000007f02000-0x0000000007f06000) (0MB)
> efi: mem32: type=4, attr=0xf, range=[0x0000000007f06000-0x0000000007fd0000) (0MB)
> efi: mem33: type=6, attr=0x800000000000000f, range=[0x0000000007fd0000-0x0000000007ff0000) (0MB)
> efi: mem34: type=7, attr=0xf, range=[0x0000000007ff0000-0x0000000008000000) (0MB)

After the patch:

> efi: mem00: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000000000-0x000000000009f000) (0MB)
> efi: mem01: [Loader Data        |   |  |  |  |   |WB|WT|WC|UC] range=[0x000000000009f000-0x00000000000a0000) (0MB)
> efi: mem02: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000000400000) (3MB)
> efi: mem03: [Loader Data        |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000400000-0x0000000000800000) (4MB)
> efi: mem04: [ACPI Memory NVS    |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000800000-0x0000000000808000) (0MB)
> efi: mem05: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000808000-0x0000000000810000) (0MB)
> efi: mem06: [ACPI Memory NVS    |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000810000-0x0000000000900000) (0MB)
> efi: mem07: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000900000-0x0000000001100000) (8MB)
> efi: mem08: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000001100000-0x0000000001400000) (3MB)
> efi: mem09: [Loader Data        |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000001400000-0x0000000002613000) (18MB)
> efi: mem10: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000002613000-0x0000000004000000) (25MB)
> efi: mem11: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000004000000-0x0000000004020000) (0MB)
> efi: mem12: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000004020000-0x00000000068ea000) (40MB)
> efi: mem13: [Loader Data        |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000068ea000-0x00000000068f0000) (0MB)
> efi: mem14: [Boot Code          |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000068f0000-0x0000000006c7b000) (3MB)
> efi: mem15: [Runtime Data       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x0000000006c7b000-0x0000000006c7d000) (0MB)
> efi: mem16: [Runtime Code       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x0000000006c7d000-0x0000000006c85000) (0MB)
> efi: mem17: [Runtime Data       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x0000000006c85000-0x0000000006c87000) (0MB)
> efi: mem18: [Boot Code          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000006c87000-0x0000000006ca3000) (0MB)
> efi: mem19: [Runtime Data       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x0000000006ca3000-0x0000000006ca6000) (0MB)
> efi: mem20: [ACPI Memory NVS    |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000006ca6000-0x0000000006cc6000) (0MB)
> efi: mem21: [Runtime Data       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x0000000006cc6000-0x0000000006d95000) (0MB)
> efi: mem22: [Runtime Code       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x0000000006d95000-0x0000000006e22000) (0MB)
> efi: mem23: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000006e22000-0x0000000007165000) (3MB)
> efi: mem24: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000007165000-0x0000000007d22000) (11MB)
> efi: mem25: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000007d22000-0x0000000007d25000) (0MB)
> efi: mem26: [Boot Code          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000007d25000-0x0000000007ea2000) (1MB)
> efi: mem27: [Runtime Code       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x0000000007ea2000-0x0000000007ed2000) (0MB)
> efi: mem28: [Runtime Data       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x0000000007ed2000-0x0000000007ef6000) (0MB)
> efi: mem29: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000007ef6000-0x0000000007f00000) (0MB)
> efi: mem30: [ACPI Reclaim Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000007f00000-0x0000000007f02000) (0MB)
> efi: mem31: [ACPI Memory NVS    |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000007f02000-0x0000000007f06000) (0MB)
> efi: mem32: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000007f06000-0x0000000007fd0000) (0MB)
> efi: mem33: [Runtime Data       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x0000000007fd0000-0x0000000007ff0000) (0MB)
> efi: mem34: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000007ff0000-0x0000000008000000) (0MB)

Both the type enum and the attribute bitmap are decoded, with the
additional benefit that the memory ranges line up as well.

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-10-03 18:41:01 +01:00
Laszlo Ersek
98d2a6ca14 efi: Introduce efi_md_typeattr_format()
At the moment, there are three architectures debug-printing the EFI memory
map at initialization: x86, ia64, and arm64. They all use different format
strings, plus the EFI memory type and the EFI memory attributes are
similarly hard to decode for a human reader.

Introduce a helper __init function that formats the memory type and the
memory attributes in a unified way, to a user-provided character buffer.

The array "memory_type_name" is copied from the arm64 code, temporarily
duplicating it. The (otherwise optional) braces around each string literal
in the initializer list are dropped in order to match the kernel coding
style more closely. The element size is tightened from 32 to 20 bytes
(maximum actual string length + 1) so that we can derive the field width
from the element size.

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[ Dropped useless 'register' keyword, which compiler will ignore ]
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-10-03 18:41:00 +01:00
Laszlo Ersek
9c97e0bdd4 efi: Add macro for EFI_MEMORY_UCE memory attribute
Add the following macro from the UEFI spec, for completeness:

  EFI_MEMORY_UCE  Memory cacheability attribute: The memory region
                  supports being configured as not cacheable, exported,
                  and supports the "fetch and add" semaphore mechanism.

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-10-03 18:40:59 +01:00
Dave Young
a5a750a98f x86/efi: Clear EFI_RUNTIME_SERVICES if failing to enter virtual mode
If enter virtual mode failed due to some reason other than the efi call
the EFI_RUNTIME_SERVICES bit in efi.flags should be cleared thus users
of efi runtime services can check the bit and handle the case instead of
assume efi runtime is ok.

Per Matt, if efi call SetVirtualAddressMap fails we will be not sure
it's safe to make any assumptions about the state of the system. So
kernel panics instead of clears EFI_RUNTIME_SERVICES bit.

Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-10-03 18:40:59 +01:00
Dave Young
6632210f50 arm64/efi: Do not enter virtual mode if booting with efi=noruntime or noefi
In case efi runtime disabled via noefi kernel cmdline
arm64_enter_virtual_mode should error out.

At the same time move early_memunmap(memmap.map, mapsize) to the
beginning of the function or it will leak early mem.

Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-10-03 18:40:59 +01:00
Dave Young
88f8abd594 arm64/efi: uefi_init error handling fix
There's one early memmap leak in uefi_init error path, fix it and
slightly tune the error handling code.

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Mark Salter <msalter@redhat.com>
Reported-by: Will Deacon <will.deacon@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-10-03 18:40:59 +01:00
Dave Young
5ae3683c38 efi: Add kernel param efi=noruntime
noefi kernel param means actually disabling efi runtime, Per suggestion
from Leif Lindholm efi=noruntime should be better. But since noefi is
already used in X86 thus just adding another param efi=noruntime for
same purpose.

Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-10-03 18:40:59 +01:00
Dave Young
6ccc72b87b lib: Add a generic cmdline parse function parse_option_str
There should be a generic function to parse params like a=b,c
Adding parse_option_str in lib/cmdline.c which will return true
if there's specified option set in the params.

Also updated efi=old_map parsing code to use the new function

Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-10-03 18:40:58 +01:00
Dave Young
b2e0a54a12 efi: Move noefi early param code out of x86 arch code
noefi param can be used for arches other than X86 later, thus move it
out of x86 platform code.

Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-10-03 18:40:58 +01:00
Josh Triplett
1282278ee0 efi-bgrt: Add error handling; inform the user when ignoring the BGRT
Gracefully handle failures to allocate memory for the image, which might
be arbitrarily large.

efi_bgrt_init can fail in various ways as well, usually because the
BIOS-provided BGRT structure does not match expectations.  Add
appropriate error messages rather than failing silently.

Reported-by: Srihari Vijayaraghavan <linux.bug.reporting@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81321
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-10-03 18:40:58 +01:00
Matt Fleming
5a17dae422 efi: Add efi= parameter parsing to the EFI boot stub
We need a way to customize the behaviour of the EFI boot stub, in
particular, we need a way to disable the "chunking" workaround, used
when reading files from the EFI System Partition.

One of my machines doesn't cope well when reading files in 1MB chunks to
a buffer above the 4GB mark - it appears that the "chunking" bug
workaround triggers another firmware bug. This was only discovered with
commit 4bf7111f50 ("x86/efi: Support initrd loaded above 4G"), and
that commit is perfectly valid. The symptom I observed was a corrupt
initrd rather than any kind of crash.

efi= is now used to specify EFI parameters in two very different
execution environments, the EFI boot stub and during kernel boot.

There is also a slight performance optimization by enabling efi=nochunk,
but that's offset by the fact that you're more likely to run into
firmware issues, at least on x86. This is the rationale behind leaving
the workaround enabled by default.

Also provide some documentation for EFI_READ_CHUNK_SIZE and why we're
using the current value of 1MB.

Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Roy Franz <roy.franz@linaro.org>
Cc: Maarten Lankhorst <m.b.lankhorst@gmail.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-10-03 18:40:57 +01:00
Ard Biesheuvel
161485e827 efi: Implement mandatory locking for UEFI Runtime Services
According to section 7.1 of the UEFI spec, Runtime Services are not fully
reentrant, and there are particular combinations of calls that need to be
serialized. Use a spinlock to serialize all Runtime Services with respect
to all others, even if this is more than strictly needed.

We've managed to get away without requiring a runtime services lock
until now because most of the interactions with EFI involve EFI
variables, and those operations are already serialised with
__efivars->lock.

Some of the assumptions underlying the decision whether locks are
needed or not (e.g., SetVariable() against ResetSystem()) may not
apply universally to all [new] architectures that implement UEFI.
Rather than try to reason our way out of this, let's just implement at
least what the spec requires in terms of locking.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-10-03 18:40:57 +01:00
Dmitry Monakhov
3e67cfad22 ext4: grab missed write_count for EXT4_IOC_SWAP_BOOT
Otherwise this provokes complain like follows:
WARNING: CPU: 12 PID: 5795 at fs/ext4/ext4_jbd2.c:48 ext4_journal_check_start+0x4e/0xa0()
Modules linked in: brd iTCO_wdt lpc_ich mfd_core igb ptp dm_mirror dm_region_hash dm_log dm_mod
CPU: 12 PID: 5795 Comm: python Not tainted 3.17.0-rc2-00175-gae5344f #158
Hardware name: Intel Corporation W2600CR/W2600CR, BIOS SE5C600.86B.99.99.x028.061320111235 06/13/2011
 0000000000000030 ffff8808116cfd28 ffffffff815c7dfc 0000000000000030
 0000000000000000 ffff8808116cfd68 ffffffff8106ce8c ffff8808116cfdc8
 ffff880813b16000 ffff880806ad6ae8 ffffffff81202008 0000000000000000
Call Trace:
 [<ffffffff815c7dfc>] dump_stack+0x51/0x6d
 [<ffffffff8106ce8c>] warn_slowpath_common+0x8c/0xc0
 [<ffffffff81202008>] ? ext4_ioctl+0x9e8/0xeb0
 [<ffffffff8106ceda>] warn_slowpath_null+0x1a/0x20
 [<ffffffff8122867e>] ext4_journal_check_start+0x4e/0xa0
 [<ffffffff81228c10>] __ext4_journal_start_sb+0x90/0x110
 [<ffffffff81202008>] ext4_ioctl+0x9e8/0xeb0
 [<ffffffff8107b0bd>] ? ptrace_stop+0x24d/0x2f0
 [<ffffffff81088530>] ? alloc_pid+0x480/0x480
 [<ffffffff8107b1f2>] ? ptrace_do_notify+0x92/0xb0
 [<ffffffff81186545>] do_vfs_ioctl+0x4e5/0x550
 [<ffffffff815cdbcb>] ? _raw_spin_unlock_irq+0x2b/0x40
 [<ffffffff81186603>] SyS_ioctl+0x53/0x80
 [<ffffffff815ce2ce>] tracesys+0xd0/0xd5

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
2014-10-03 12:47:23 -04:00
Tomeu Vizoso
58a9014ae6 ASoC: fsl_spdif: Remove unused includes of linux/clk-private.h
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-03 17:19:32 +01:00
Linus Torvalds
ee042ec880 One fix for raid5 discard issue.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIVAwUAVC40bznsnt1WYoG5AQJs0w//T8Z3vBhXwC3SjREbH42x8pWxFXgzhUdW
 WGKwYYwHFQfL05rP3eg+X+Sh+X3s3E3/+lFzDVE/JGjBdSG/A5X+j5jRH6ENl16u
 32wQjZwKliYxSiUPWbbPzl0BDi3nyhpR1CMsgTWpU6qkMuGy2npNZFK/cQIy4/Je
 ygXLwncKPfAVszaMrx9oBeghpwTnJR3Se1RAYhxc4qQLm+jXfUTQ9Ool3J2InZo3
 st7weyuvPrtr+Em65ta0j/VIOzTP5dIallq+LSL5e0lhn5Pc99XBaM60lEzH9mwP
 t8ZDuV6HL8rXktCOwNtkmEQeW/7uOpmwKG0yt6nPFKghsclJvbyrtxOWKnOrPAd8
 0rvUAX7EXX/OQyEjguhJQ1ZK9E4HxglGay7trVyXeLdK3kOUaVjAlG/5y8FrEusU
 K/uOnHwIiCDxTZ86imTcRcXxOG5eWVscsWwVFIHf2IN4J1NKJ7rQB6LP4WEKzHGE
 y3CgSy/c7yyuksMlYZE9q1GRc5i8pI5tGg3tV2S2uvgjuNIw6dkAF1UjW5Mpgy3x
 OFue/SxsYWuBeSqMANuJQDeCOLttwSZV/Ho3Kac+nA7l0LTXkVIYFj0bSGIIUxjI
 scF+r04u35/jib0QALdeTw9FB46V5GYZ7d0bd/lEMxe24dsPreCKiI/xDvpr5NQn
 8flYcaBK+PI=
 =Qyea
 -----END PGP SIGNATURE-----

Merge tag 'md/3.17-final-fix' of git://neil.brown.name/md

Pull raid5 discard fix from Neil Brown:
 "One fix for raid5 discard issue"

* tag 'md/3.17-final-fix' of git://neil.brown.name/md:
  md/raid5: disable 'DISCARD' by default due to safety concerns.
2014-10-03 08:40:37 -07:00
Daniel Vetter
b727735732 drm/i915: Update DRIVER_DATE to 20141003
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-03 17:38:34 +02:00
Mark Brown
a2285b8c75 Merge remote-tracking branch 'spi/topic/xilinx' into spi-next 2014-10-03 16:33:44 +01:00
Mark Brown
bab4d751f7 Merge remote-tracking branches 'spi/topic/pl022', 'spi/topic/pxa2xx', 'spi/topic/rspi', 'spi/topic/sh-msiof' and 'spi/topic/sirf' into spi-next 2014-10-03 16:33:42 +01:00
Mark Brown
899d81b974 Merge remote-tracking branches 'spi/topic/fsl-dspi', 'spi/topic/imx', 'spi/topic/mxs', 'spi/topic/omap-100k' and 'spi/topic/orion' into spi-next 2014-10-03 16:33:41 +01:00
Mark Brown
7020d76971 Merge remote-tracking branches 'spi/topic/davinci', 'spi/topic/doc', 'spi/topic/dw' and 'spi/topic/fsl' into spi-next 2014-10-03 16:33:39 +01:00
Mark Brown
1fc8450313 Merge remote-tracking branches 'spi/topic/bcm53xx', 'spi/topic/cadence', 'spi/topic/checkpatch' and 'spi/topic/clps711x' into spi-next 2014-10-03 16:33:37 +01:00
Mark Brown
613c44798f Merge remote-tracking branch 'spi/topic/dma-dep' into spi-next 2014-10-03 16:33:37 +01:00
Mark Brown
ad71f40a83 Merge remote-tracking branch 'spi/topic/core' into spi-next 2014-10-03 16:33:37 +01:00
Mark Brown
62d02e41ea Merge remote-tracking branch 'spi/fix/rockchip' into spi-linus 2014-10-03 16:33:35 +01:00
Linus Torvalds
80ad99da8b Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
 "Nothing too major or scary.

  One i915 regression fix, nouveau has a tmds regression fix, along with
  a regression fix for the runtime pm code for optimus laptops not
  restoring the display hw correctly"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/nouveau: make sure display hardware is reinitialised on runtime resume
  drm/nouveau: punt fbcon resume out to a workqueue
  drm/nouveau: fix regression on original nv50 board
  drm/nv50/disp: fix dpms regression on certain boards
  drm/i915: Flush the PTEs after updating them before suspend
2014-10-03 08:31:14 -07:00
Guenter Roeck
3afb57fa72 hwmon: (ab8500) Call kernel_power_off instead of pm_power_off
Drivers should not call pm_power_off directly; it is not guaranteed
to be non-NULL. Call kernel_power_off instead.

Cc: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-10-03 08:19:02 -07:00
David Howells
dd2f6c4481 X.509: If available, use the raw subjKeyId to form the key description
Module signing matches keys by comparing against the key description exactly.
However, the way the key description gets constructed got changed to be
composed of the subject name plus the certificate serial number instead of the
subject name and the subjectKeyId.  I changed this to avoid problems with
certificates that don't *have* a subjectKeyId.

Instead, if available, use the raw subjectKeyId to form the key description
and only use the serial number if the subjectKeyId doesn't exist.

Reported-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2014-10-03 16:17:02 +01:00
Dmitry Lavnikevich
31d9f8faf9 ASoC: tlv320aic3x: fix PLL D configuration
Current caching implementation during regcache_sync() call bypasses
all register writes of values that are already known as default
(regmap reg_defaults). Same time in TLV320AIC3x codecs register 5
(AIC3X_PLL_PROGC_REG) write should be immediately followed by register
6 write (AIC3X_PLL_PROGD_REG) even if it was not changed. Otherwise
both registers will not be written.

This brings to issue that appears particulary in case of 44.1kHz
playback with 19.2MHz master clock. In this case AIC3X_PLL_PROGC_REG
is 0x6e while AIC3X_PLL_PROGD_REG is 0x0 (same as register
default). Thus AIC3X_PLL_PROGC_REG also remains not written and we get
wrong playback speed.

In this patch snd_soc_read() is used to get cached pll values and
snd_soc_write() (unlike regcache_sync() this function doesn't bypasses
hardware default values) to write them to registers.

Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2014-10-03 16:06:11 +01:00
Jarkko Nikula
b2d9de549c ASoC: dapm: Fix NULL pointer dereference when registering card with widgets
Commit 0bd2ac3dae ("ASoC: Remove CODEC pointer from snd_soc_dapm_context")
introduced regression to snd_soc_dapm_new_controls() when registering a card
with card->dapm_widgets set. Call chain is:

    snd_soc_register_card()
    -> snd_soc_instantiate_card()
       -> snd_soc_dapm_new_controls()
          -> snd_soc_dapm_new_control()

Null pointer dereference occurs since card->dapm context doesn't have
associated component. Fix this by setting widget codec pointer
conditionally.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-03 15:39:19 +01:00
Richard Weinberger
91401a3403 UBI: Fastmap: Calc fastmap size correctly
We need to add fm_sb too.

Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Tanya Brokhman <tlinder@codeaurora.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-10-03 17:33:28 +03:00
Krzysztof Kozlowski
c8c5ebcc5e Documentation: charger: max14577: Update the date of introducing ABI
Update the date of introducing max14577 charger's ABI (fast_charge_timer
sysfs entry) to approximate date of kernel release which actually
introduces this.

The old date came from previous driver submissions.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2014-10-03 16:28:19 +02:00
Geert Uytterhoeven
a968bed78b PM / clk: Fix crash in clocks management code if !CONFIG_PM_RUNTIME
Unlike the clocks management code for runtime PM, the code used for
system suspend does not check the pm_clock_entry.status field.
If pm_clk_acquire() failed, ce->status will be PCE_STATUS_ERROR, and
ce->clk will be a negative error code (e.g. 0xfffffffe = -2 = -ENOENT).

Depending on the clock implementation, suspend or resume may crash with:

    Unable to handle kernel NULL pointer dereference at virtual address 00000026

(CCF clk_disable() has an IS_ERR_OR_NULL() check, while CCF clk_enable()
 only has a NULL check; pre-CCF implementations may behave differently)

While just checking for PCE_STATUS_ERROR would be sufficient, it doesn't
hurt to use the same state machine as is done for runtime PM, as this
makes the two versions more similar, and eligible for a future
consolidation.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-03 15:51:39 +02:00
Geoff Levand
0a6479b0ff arm64: Remove unneeded extern keyword
Function prototypes are never definitions, so remove any 'extern' keyword
from the funcion prototypes in cpu_ops.h. Fixes warnings emited by
checkpatch.

Signed-off-by: Geoff Levand <geoff@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-10-03 14:51:02 +01:00
Michael Opdenacker
0415447aa3 Documentation: fix broken v4l-utils URL
This replaces http://git.linuxtv.org/v4l-utils/ (broken link)
by http://git.linuxtv.org/cgit.cgi/v4l-utils.git/

Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-03 15:49:57 +02:00
Uwe Kleine-König
c8fdd497a4 ARM64: make of_device_ids const
of_device_ids (i.e. compatible strings and the respective data) are not
supposed to change at runtime. All functions working with of_device_ids
provided by <linux/of.h> work with const of_device_ids. So mark the
only non-const struct in arch/arm64 as const, too.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-10-03 14:49:28 +01:00
Peter Foley
7b345771ba Documentation: update include path for mpssd
sysfs.c includes mpssd.h which includes virtio_ids.h.
sysfs.c doesn't have the proper include flags set to use the latest
headers, so this causes a build error if the system headers are too old.

Signed-off-by: Peter Foley <pefoley2@pefoley.com>
Cc: rdunlap@infradead.org
Cc: linux-doc@vger.kernel.org
Cc: sudeep.dutt@intel.com
Cc: nikhil.rao@intel.com
Cc: ashutosh.dixit@intel.com
Cc: akpm@linux-foundation.org
Cc: gregkh@linuxfoundation.org
Cc: harshavardhan.r.kharche@intel.com
Cc: caz.yokoyama@intel.com
Cc: dasaratharaman.chandramouli@intel.com
Cc: jkosina@suse.cz
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-03 15:48:20 +02:00
Rafael J. Wysocki
cbe68a2bd0 Merge back 'acpi-video' material for v3.18. 2014-10-03 15:46:02 +02:00
Ulf Hansson
f39cb1797e PM / Domains: Rename cpu_data to cpuidle_data
The "cpu_data" are defined for some archs and thus conflicting with the
"cpu_data" member in the struct gpd_cpu_data. This causes a compiler
error for those archs.

Let's fix it by rename the member to cpuidle_data. In this context it
also seems appropriate to rename the struct to gpd_cpuidle_data to
better reflect its use.

Fixes: f48c767ce8 (PM / Domains: Move dev_pm_domain_attach|detach() to pm_domain.h)
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-03 15:43:14 +02:00
Rafael J. Wysocki
6f1293ff74 Merge back cpufreq material for v3.18. 2014-10-03 15:41:16 +02:00
Lucas Stach
f9739d2705 cpufreq: cpufreq-dt: fix potential double put of cpu OF node
If cpufreq_generic_init() fails we jump into the resource
cleanup path which contains a of_node_put() call. Another
instance of this has already been called at that time
resulting a double decrement of the refcount.

Fix this by calling of_node_put() only after we are sure
that nothing has gone wrong.

Fixes: d2f31f1da5 "cpufreq: cpu0: Move per-cluster initialization code to ->init()"
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-03 15:40:55 +02:00
Bob Peterson
d24e0569e0 GFS2: Use gfs2_rbm_incr in rgblk_free
This patch speeds up GFS2 unlink operations by using function
gfs2_rbm_incr rather than continuously calculating the rbm.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-10-03 14:40:10 +01:00