Commit graph

505,617 commits

Author SHA1 Message Date
Clemens Ladisch
4e9c58cb12 ALSA: oxygen: set fifo_size
Allow the driver to report the hardware FIFO size.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-22 08:57:01 +02:00
Harley Griggs
5ae0095d00 ALSA: virtuoso: add partial Xonar Xense support
This patch adds partial support for the Xonar Xense.

[trivial coding style fixes by tiwai]

Signed-off-by: Harley Griggs <hgriggs@posteo.co.uk>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-22 08:55:15 +02:00
Krzysztof Kozlowski
d715523174 extcon: max77693: Use resource managed interrupt line
Use resource managed interrupt line devm_request_threaded_irq() to
simplify a little cleanup paths:
 - no goto to cleanup label,
 - simpler remove function.

Overall the driver size is decreased by 11 line of code.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-09-22 15:53:23 +09:00
Daniel Mack
e76bf63487 ALSA: snd-usb-caiaq: Fix LED commands for Kore controller
KoreController and KoreController2 need an EP1_CMD_DIMM_LEDS command to set
their LEDs, not EP1_CMD_WRITE_IO.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Reported-and-tested-by: Brad Wilson <brad.wilson.00@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-22 08:52:14 +02:00
Clemens Ladisch
a9960e6a29 ALSA: pcm: fix fifo_size frame calculation
The calculated frame size was wrong because snd_pcm_format_physical_width()
actually returns the number of bits, not bytes.

Use snd_pcm_format_size() instead, which not only returns bytes, but also
simplifies the calculation.

Fixes: 8bea869c5e ("ALSA: PCM midlevel: improve fifo_size handling")
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-22 08:51:35 +02:00
Guenter Roeck
bb2e226b3b Revert "percpu: free percpu allocation info for uniprocessor system"
This reverts commit 3189eddbca ("percpu: free percpu allocation info for
uniprocessor system").

The commit causes a hang with a crisv32 image. This may be an architecture
problem, but at least for now the revert is necessary to be able to boot a
crisv32 image.

Cc: Tejun Heo <tj@kernel.org>
Cc: Honggang Li <enjoymindful@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 3189eddbca ("percpu: free percpu allocation info for uniprocessor system")
Cc: stable@vger.kernel.org # Please don't apply 3189eddbca
2014-09-21 23:32:38 -04:00
Chanwoo Choi
6281100ec8 dt-bindings: extcon: Add support for Richtek RT8973A MUIC device
This patch add documentation for binding of Richtek RT8973A (Micro USB Switch)
device which is using EXTCON subsystem. The RT8973A device can detect various
external accessories when external accessories is attached or detached.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
2014-09-22 11:43:08 +09:00
Chanwoo Choi
c03e017c4d extcon: rt8973a: Add Richtek RT8973A extcon driver
This patch add support for Richtek RT8973A which is Micro USB Switch OVP
and i2c interface. The RT8973A is a USB port accessory detector and switch
that is optimized to protect low voltage system from abnormal high input
voltage (up to 28V) and supports high speed USB operation. Also, RT8973A
support 'auto-configuration' mode. If auto-configuration mode is enabled,
RT8973A would control internal h/w patch for USB D-/D+ switching.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
2014-09-22 11:43:08 +09:00
Chanwoo Choi
fbae30d8dd extcon: sm5502: Clean up codes by using checkpatch script
This patch just clean up codes by using checkpatch script and fix warning
message about if statement.

- the result of checkpatch script as following:
WARNING: void function return statements are not generally useful
+	return;
+}

WARNING: quoted string split across lines
+			dev_err(info->dev, "failed: irq request (IRQ: %d,"
+				" error :%d)\n", muic_irq->irq, ret);

- warning message about coding style.

	drivers/extcon/extcon-sm5502.c:398 sm5502_muic_cable_handler()
		warn: we tested 'attached' before and it was 'false'

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-09-22 11:43:08 +09:00
Chanwoo Choi
ca2a07e45d extcon: sm5502: Move sm5502.h header file to extcon directory
This patch move sm5502.h header file from 'include/linux/extcon' to
'driver/extcon' because sm5502.h is used for driver/extcon/extcon-sm5502.c.
and remove duplicate license description.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-09-22 11:43:08 +09:00
Chanwoo Choi
0746d5d31f extcon: sm5502: Add I2C dependency to fix build break
This patch add I2C configuration dependency to fix following build break.
If specific kernel build I2C as module, extcon-sm5502 have to depend on
I2C configuration.

	drivers/built-in.o: In function `regmap_smbus_byte_reg_read':
	regmap-i2c.c:(.text+0x5030a): undefined reference to `i2c_smbus_read_byte_data'
	drivers/built-in.o: In function `regmap_smbus_byte_reg_write':
	regmap-i2c.c:(.text+0x50338): undefined reference to `i2c_smbus_write_byte_data'
	drivers/built-in.o: In function `regmap_smbus_word_reg_read':
	regmap-i2c.c:(.text+0x50356): undefined reference to `i2c_smbus_read_word_data'
	drivers/built-in.o: In function `regmap_smbus_word_reg_write':
	regmap-i2c.c:(.text+0x50384): undefined reference to `i2c_smbus_write_word_data'
	drivers/built-in.o: In function `regmap_i2c_read':
	regmap-i2c.c:(.text+0x503cf): undefined reference to `i2c_transfer'
	drivers/built-in.o: In function `regmap_i2c_gather_write':
	regmap-i2c.c:(.text+0x50442): undefined reference to `i2c_transfer'
	drivers/built-in.o: In function `regmap_i2c_write':
	regmap-i2c.c:(.text+0x50474): undefined reference to `i2c_master_send'
	drivers/built-in.o: In function `sm5502_muic_i2c_init':
	extcon-sm5502.c:(.init.text+0x6630): undefined reference to `i2c_register_driver'

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-09-22 11:43:07 +09:00
Chanwoo Choi
0ccc7955ac extcon: sm5502: Fix bug to check cable type
This patch fix bug when checking cable type. SM5502 have to use ADC value
to get correct cable type.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-09-22 11:43:07 +09:00
NeilBrown
b8cb6b4c12 md/raid1: fix_read_error should act on all non-faulty devices.
If a devices is being recovered it is not InSync and is not Faulty.

If a read error is experienced on that device, fix_read_error()
will be called, but it ignores non-InSync devices.  So it will
neither fix the error nor fail the device.

It is incorrect that fix_read_error() ignores non-InSync devices.
It should only ignore Faulty devices.  So fix it.

This became a bug when we allowed reading from a device that was being
recovered.  It is suitable for any subsequent -stable kernel.

Fixes: da8840a747
Cc: stable@vger.kernel.org (v3.5+)
Reported-by: Alexander Lyakas <alex.bolshoy@gmail.com>
Tested-by: Alexander Lyakas <alex.bolshoy@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-22 11:26:01 +10:00
NeilBrown
34e97f1701 md/raid1: count resync requests in nr_pending.
Both normal IO and resync IO can be retried with reschedule_retry()
and so be counted into ->nr_queued, but only normal IO gets counted in
->nr_pending.

Before the recent improvement to RAID1 resync there could only
possibly have been one or the other on the queue.  When handling a
read failure it could only be normal IO.  So when handle_read_error()
called freeze_array() the fact that freeze_array only compares
->nr_queued against ->nr_pending was safe.

But now that these two types can interleave, we can have both normal
and resync IO requests queued, so we need to count them both in
nr_pending.

This error can lead to freeze_array() hanging if there is a read
error, so it is suitable for -stable.

Fixes: 79ef3a8aa1
cc: stable@vger.kernel.org (v3.13+)
Reported-by: Brassow Jonathan <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-22 11:26:01 +10:00
NeilBrown
c2fd4c94de md/raid1: update next_resync under resync_lock.
raise_barrier() uses next_resync as part of its calculations, so it
really should be updated first, instead of afterwards.

next_resync is always used under resync_lock so update it under
resync lock to, just before it is used.  That is safest.

This could cause normal IO and resync IO to interact badly so
it suitable for -stable.

Fixes: 79ef3a8aa1
cc: stable@vger.kernel.org (v3.13+)
Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-22 11:26:01 +10:00
NeilBrown
235549605e md/raid1: Don't use next_resync to determine how far resync has progressed
next_resync is (approximately) the location for the next resync request.
However it does *not* reliably determine the earliest location
at which resync might be happening.
This is because resync requests can complete out of order, and
we only limit the number of current requests, not the distance
from the earliest pending request to the latest.

mddev->curr_resync_completed is a reliable indicator of the earliest
position at which resync could be happening.   It is updated less
frequently, but is actually reliable which is more important.

So use it to determine if a write request is before the region
being resynced and so safe from conflict.

This error can allow resync IO to interfere with normal IO which
could lead to data corruption. Hence: stable.

Fixes: 79ef3a8aa1
cc: stable@vger.kernel.org (v3.13+)
Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-22 11:26:01 +10:00
NeilBrown
2f73d3c55d md/raid1: make sure resync waits for conflicting writes to complete.
The resync/recovery process for raid1 was recently changed
so that writes could happen in parallel with resync providing
they were in different regions of the device.

There is a problem though:  While a write request will always
wait for conflicting resync to complete, a resync request
will *not* always wait for conflicting writes to complete.

Two changes are needed to fix this:

1/ raise_barrier (which waits until it is safe to do resync)
   must wait until current_window_requests is zero
2/ wait_battier (which waits at the start of a new write request)
   must update current_window_requests if the request could
   possible conflict with a concurrent resync.

As concurrent writes and resync can lead to data loss,
this patch is suitable for -stable.

Fixes: 79ef3a8aa1
Cc: stable@vger.kernel.org (v3.13+)
Cc: majianpeng <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-22 11:26:01 +10:00
NeilBrown
669cc7ba77 md/raid1: clean up request counts properly in close_sync()
If there are outstanding writes when close_sync is called,
the change to ->start_next_window might cause them to
decrement the wrong counter when they complete.  Fix this
by merging the two counters into the one that will be decremented.

Having an incorrect value in a counter can cause raise_barrier()
to hangs, so this is suitable for -stable.

Fixes: 79ef3a8aa1
cc: stable@vger.kernel.org (v3.13+)
Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-22 11:26:01 +10:00
Frank Schaefer
8e2c8717c1 [media] em28xx-v4l: get rid of field "users" in struct em28xx_v4l2"
This reverts commit 747dba7de2.

It breaks concurrent vbi and video capturing:
While v4l2->users is the number of users of the whole device (all device nodes),
v4l2_fh_is_singular() only checks the number of users of a specific device node.
As a result. if one device node is open and a second device node is opened
(closed), the device is reinitialized (streaming is stopped).

Reported-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 21:27:57 -03:00
NeilBrown
c6d119cf1b md/raid1: be more cautious where we read-balance during resync.
commit 79ef3a8aa1 made
it possible for reads to happen concurrently with resync.
This means that we need to be more careful where read_balancing
is allowed during resync - we can no longer be sure that any
resync that has already started will definitely finish.

So keep read_balancing to before recovery_cp, which is conservative
but safe.

This bug makes it possible to read from a device that doesn't
have up-to-date data, so it can cause data corruption.
So it is suitable for any kernel since 3.11.

Fixes: 79ef3a8aa1
cc: stable@vger.kernel.org (v3.13+)
Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-22 10:26:41 +10:00
NeilBrown
f0cc9a0571 md/raid1: intialise start_next_window for READ case to avoid hang
r1_bio->start_next_window is not initialised in the READ
case, so allow_barrier may incorrectly decrement
   conf->current_window_requests
which can cause raise_barrier() to block forever.

Fixes: 79ef3a8aa1
cc: stable@vger.kernel.org (v3.13+)
Reported-by: Brassow Jonathan <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-22 10:18:03 +10:00
Mauro Carvalho Chehab
c7854c2c5d [media] em28xx: fix VBI handling logic
When both VBI and video are streaming, and video stream is stopped,
a subsequent trial to restart it will fail, because S_FMT will
return -EBUSY.

That prevents applications like zvbi to work properly.

Please notice that, while this fix it fully for zvbi, the
best is to get rid of streaming_users and res_get logic as a hole.

However, this single-line patch is better to be merged at -stable.

Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 21:07:29 -03:00
Dave Airlie
42532512ee Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Sorry for late. This pull request includes some enhancements
   for Exynos drm, new feature supports, cleanups and fixups
   like below,

   - Consider low power transmission for drm mipi dsi module,
     and also add non-continuous clock mode support for Exynos
     mipi dsi driver.
   - Add Exynos3250 SoC support.
   - Enhance and clean up ipp framework and fimc driver.
   - Update to use component match support and fix up
     de-initialization order.
   - Remove a direct mmap interface and relevant stuff specific to
     Exynos drm, use drm generic mmap interface instead.
     And we will remove the specific interface from userspace
     library, libdrm soon.
   - Use universal plane which allows to replace fake primary plane
     with the real one.
   - Some code cleanups and fixups.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (40 commits)
  drm/exynos: switch to universal plane API
  drm/exynos: use drm generic mmap interface
  drm/exynos: remove DRM_EXYNOS_GEM_MAP_OFFSET ioctl
  drm/exynos: factor out initial setting of each driver
  drm/exynos/hdmi: unregister connector on removal
  drm/exynos/dp: unregister connector on removal
  drm/exynos/dpi: unregister connector and panel on removal
  drm/exynos/dsi: unregister connector on removal
  drm/exynos/fb: free exynos framebuffer on error
  drm/exynos/fbdev: fix fbdev gem object cleanup
  drm/exynos: fix drm driver de-initialization order
  drm/exynos/ipp: traverse ipp drivers list safely
  drm/exynos: update to use component match support
  drm/exynos/ipp: add file checks for ioctls
  drm/exynos/ipp: remove file argument from node related functions
  drm/exynos/fimc: fix source buffer registers
  drm/exynos/fimc: simplify buffer queuing
  drm/exynos/fimc: do not enable fimc twice
  drm/exynos/fimc: avoid clearing overflow bits
  drm/exynos/ipp: remove events during command cleaning
  ...
2014-09-22 10:07:25 +10:00
Mauro Carvalho Chehab
eb500df22c [media] em28xx: Get rid of some unused modprobe parameters at vbi code
There are two modprobe parameters for VBI that aren't used
anywhere (one for debug, the other one related to the buffer
size). Get rid of them!

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 21:06:44 -03:00
Morgan Phillips
e0aa2b28d4 [media] sn9c20x: fix checkpatch warning: sizeof cmatrix should be sizeof(cmatrix)
Signed-off-by: Morgan Phillips <winter2718@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 20:59:57 -03:00
Morgan Phillips
312487ccfd [media] sn9c20x.c: fix checkpatch error: that open brace { should be on the previous line
Signed-off-by: Morgan Phillips <winter2718@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 20:59:35 -03:00
Hans Verkuil
91235537bc [media] DocBook media: improve the poll() documentation
The poll documentation was incomplete: document how events (POLLPRI)
are handled and fix the documentation of what poll does for display devices
and streaming I/O.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 20:58:36 -03:00
Hans Verkuil
acf92046a0 [media] DocBook media: fix the poll() 'no QBUF' documentation
Clarify what poll() returns if STREAMON was called but not QBUF.
Make explicit the different behavior for this scenario for
capture and output devices.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 20:58:02 -03:00
Hans Verkuil
58d75f4b1c [media] vb2: fix VBI/poll regression
The recent conversion of saa7134 to vb2 unconvered a poll() bug that
broke the teletext applications alevt and mtt. These applications
expect that calling poll() without having called VIDIOC_STREAMON will
cause poll() to return POLLERR. That did not happen in vb2.

This patch fixes that behavior. It also fixes what should happen when
poll() is called when STREAMON is called but no buffers have been
queued. In that case poll() will also return POLLERR, but only for
capture queues since output queues will always return POLLOUT
anyway in that situation.

This brings the vb2 behavior in line with the old videobuf behavior.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 20:57:30 -03:00
Hans Verkuil
50394e7369 [media] cx2341x: fix kernel oops
The v4l2_ctrl_config struct must be zeroed before passing it to
v4l2_ctrl_new_custom(). This was always wrong, but with the recent
v4l2-ctrls.c changes this is now much more likely to lead to a
kernel bug.

This is the only place where this struct wasn't initialized properly.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Pridvorov Andrey <ua0lnj@bk.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 20:56:11 -03:00
Hans Verkuil
fdc6b38892 [media] cx24123: fix kernel oops due to missing parent pointer
When I try to set the TV standard to e.g. PAL on my Hauppauge WinTV-HVR3000 I get
the following oops:

 9464.262345] CX24123: detected CX24123
[ 9464.262526] BUG: unable to handle kernel NULL pointer dereference at 0000000000000230
[ 9464.262555] IP: [<ffffffff816676b5>] acpi_i2c_install_space_handler+0x15/0xc0
[ 9464.262576] PGD 0
[ 9464.262584] Oops: 0000 [#1] PREEMPT SMP
[ 9464.262597] Modules linked in: cx24123 cx22702 cx88_dvb(+) videobuf_dvb cx88_vp3054_i2c cx88_blackbird cx8802 ir_lirc_codec ir_xmp_decoder ir_sanyo_decoder ir_jvc_decoder ir_mce_kbd_decoder ir_sharp_decoder lirc_dev ir_sony_decoder ir_rc6_decoder ir_nec_decoder ir_rc5_decoder rc_hauppauge wm8775 tuner_simple tuner_types tda9887 cx8800 cx88xx btcx_risc videobuf_dma_sg videobuf_core mt2131 s5h1409 tda8290 tuner cx25840 cx23885 altera_ci tda18271 altera_stapl videobuf2_dvb tveeprom cx2341x videobuf2_dma_sg dvb_core rc_core videobuf2_memops videobuf2_core v4l2_common videodev media nouveau x86_pkg_temp_thermal cfbfillrect cfbimgblt cfbcopyarea ttm drm_kms_helper processor button isci
[ 9464.262786] CPU: 2 PID: 2417 Comm: modprobe Not tainted 3.17.0-rc1-telek #322
[ 9464.262796] Hardware name: ASUSTeK COMPUTER INC. Z9PE-D8 WS/Z9PE-D8 WS, BIOS 5404 02/10/2014
[ 9464.262807] task: ffff881097959ad0 ti: ffff88109967c000 task.ti: ffff88109967c000
[ 9464.262817] RIP: 0010:[<ffffffff816676b5>]  [<ffffffff816676b5>] acpi_i2c_install_space_handler+0x15/0xc0
[ 9464.262834] RSP: 0018:ffff88109967fbd8  EFLAGS: 00010246
[ 9464.262843] RAX: 0000000000000000 RBX: ffff880892a89540 RCX: 0000000000000000
[ 9464.262853] RDX: 0000000080000001 RSI: ffff880892e75870 RDI: ffff880892a89540
[ 9464.262862] RBP: ffff88109967fbf8 R08: ffff881099b2ccc0 R09: ffff880891efa088
[ 9464.262872] R10: 0000000000000000 R11: 0000000000000022 R12: 0000000000000000
[ 9464.262883] R13: ffff880892a895b0 R14: 00000000ffffffed R15: ffff88089b48f800
[ 9464.262893] FS:  00007fe42b6d7700(0000) GS:ffff88089fc40000(0000) knlGS:0000000000000000
[ 9464.262904] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 9464.262912] CR2: 0000000000000230 CR3: 0000001094078000 CR4: 00000000000407e0
[ 9464.262922] Stack:
[ 9464.262927]  ffff880892a89540 0000000000000000 ffff880892a895b0 ffff88109a155a80
[ 9464.262944]  ffff88109967fc20 ffffffff81666a36 0000000000000020 ffff880892a89540
[ 9464.262960]  ffffffffa01c8d40 ffff88109967fc40 ffffffff81666c67 ffff880892a89000
[ 9464.262977] Call Trace:
[ 9464.262987]  [<ffffffff81666a36>] i2c_register_adapter+0x166/0x340
[ 9464.262998]  [<ffffffff81666c67>] i2c_add_adapter+0x57/0x60
[ 9464.263011]  [<ffffffffa01e2c58>] cx24123_attach+0x108/0x1ba [cx24123]
[ 9464.263025]  [<ffffffffa01c5a76>] dvb_register+0x404/0x245b [cx88_dvb]
[ 9464.263039]  [<ffffffffa0059183>] ? videobuf_queue_core_init+0xe3/0x140 [videobuf_core]
[ 9464.263052]  [<ffffffffa01c54b1>] cx8802_dvb_probe+0x1e1/0x261 [cx88_dvb]
[ 9464.263066]  [<ffffffffa01a3b00>] cx8802_register_driver+0x190/0x20d [cx8802]
[ 9464.263077]  [<ffffffffa01cc000>] ? 0xffffffffa01cc000
[ 9464.263089]  [<ffffffffa01cc025>] dvb_init+0x25/0x27 [cx88_dvb]
[ 9464.263101]  [<ffffffff810002c4>] do_one_initcall+0x84/0x1c0
[ 9464.263113]  [<ffffffff811893fa>] ? __vunmap+0x9a/0x100
[ 9464.263125]  [<ffffffff81122a66>] load_module+0x1216/0x1790
[ 9464.263134]  [<ffffffff8111ff70>] ? __symbol_put+0x70/0x70
[ 9464.263145]  [<ffffffff811aa8cc>] ? vfs_read+0x11c/0x170
[ 9464.263156]  [<ffffffff811201d9>] ? copy_module_from_fd.isra.53+0x119/0x170
[ 9464.263168]  [<ffffffff81123116>] SyS_finit_module+0x76/0x80
[ 9464.263181]  [<ffffffff818d19e9>] system_call_fastpath+0x16/0x1b
[ 9464.263190] Code: 81 31 c0 e8 2e f6 e8 ff 48 83 c4 08 5b 5d eb de 66 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 54 53 41 be ed ff ff ff 48 8b 47 70 <48> 8b 80 30 02 00 00 48 85 c0 74 58 4c 8b 68 08 4d 85 ed 74 4f
[ 9464.263347] RIP  [<ffffffff816676b5>] acpi_i2c_install_space_handler+0x15/0xc0
[ 9464.263361]  RSP <ffff88109967fbd8>
[ 9464.263367] CR2: 0000000000000230
[ 9464.266919] ---[ end trace 57fd490bdb72e733 ]---

I traced this to a NULL i2c_adapter parent pointer when cx24123 creates its own
i2c adapter. The acpi_i2c_install_space_handler function appeared in 3.17, so
that's probably why this hasn't been seen before.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 20:55:37 -03:00
Hans Verkuil
77639ff2b3 [media] adv7604: fix inverted condition
The log_status function should show HDMI information, but the test checking for
an HDMI input was inverted. Fix this.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: stable@vger.kernel.org      # for v3.12 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 20:54:43 -03:00
Randy Dunlap
7102076c92 [media] media/radio: fix radio-miropcm20.c build with io.h header file
Fix build errors in radio-miropcm20.c due to missing header file:

drivers/media/radio/radio-miropcm20.c: In function 'rds_waitread':
drivers/media/radio/radio-miropcm20.c:90:3: error: implicit declaration of function 'inb' [-Werror=implicit-function-declaration]
drivers/media/radio/radio-miropcm20.c: In function 'rds_rawwrite':
drivers/media/radio/radio-miropcm20.c:106:3: error: implicit declaration of function 'outb' [-Werror=implicit-function-declaration]

Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 20:50:38 -03:00
Zhaowei Yuan
a9ae4692ed [media] vb2: fix plane index sanity check in vb2_plane_cookie()
It's also invalid when plane_no is equal to vb->num_planes

Signed-off-by: Zhaowei Yuan <zhaowei.yuan@samsung.com>
Cc: stable@vger.kernel.org      # for v3.7 and up
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 20:50:21 -03:00
Hans Verkuil
983ed75564 [media] DocBook media: update version number and V4L2 changes
Note: the revision text for the v4l2_pix_format change from Laurent
erroneously mentioned 3.16 when it only got merged for 3.17. Fixed
that as well.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 20:47:17 -03:00
Hans Verkuil
1b88db2f2b [media] DocBook media: fix fieldname in struct v4l2_subdev_selection
Field 'rect' is really named 'r'.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 20:46:32 -03:00
Hans Verkuil
bf3593d939 [media] vb2: fix vb2 state check when start_streaming fails
Commit bd994ddb2a (vb2: Fix stream start and
buffer completion race) broke the buffer state check in vb2_buffer_done.

So accept all three possible states there since I can no longer tell the
difference between vb2_buffer_done called from start_streaming or from
elsewhere.

Instead add a WARN_ON at the end of start_streaming that will check whether
any buffers were added to the done list, since that implies that the wrong
state was used as well.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: stable@vger.kernel.org      # for v3.15 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 20:46:10 -03:00
Hans Verkuil
44e8e69d46 [media] videobuf2-core.h: fix comment
The comment for start_streaming that tells the developer with which vb2 state
buffers should be returned to vb2 gave the wrong state. Very confusing.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 20:45:23 -03:00
Hans Verkuil
23cd08c8f7 [media] videobuf2-core: add comments before the WARN_ON
Recently WARN_ON() calls have been added to warn if the driver is not
properly returning buffers to vb2 in start_streaming (if it fails) or
stop_streaming(). Add comments before those WARN_ON calls that refer
to the videobuf2-core.h header that explains what drivers are supposed
to do in these situations. That should help point developers in the
right direction if they see these warnings.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 20:45:03 -03:00
Hans Verkuil
47bc59c52b [media] videobuf2-dma-sg: fix for wrong GFP mask to sg_alloc_table_from_pages
sg_alloc_table_from_pages() only allocates a sg_table, so it should just use
GFP_KERNEL, not gfp_flags. If gfp_flags contains __GFP_DMA32 then mm/sl[au]b.c
will call BUG_ON:

[  358.027515] ------------[ cut here ]------------
[  358.027546] kernel BUG at mm/slub.c:1416!
[  358.027558] invalid opcode: 0000 [#1] PREEMPT SMP
[  358.027576] Modules linked in: mt2131 s5h1409 tda8290 tuner cx25840 cx23885 btcx_risc altera_ci tda18271 altera_stapl videobuf2_dvb tveeprom cx2341x videobuf2_dma_sg dvb_core rc_core videobuf2_memops videobuf2_core nouveau zr36067 videocodec v4l2_common videodev media x86_pkg_temp_thermal cfbfillrect cfbimgblt cfbcopyarea ttm drm_kms_helper processor button isci
[  358.027712] CPU: 19 PID: 3654 Comm: cat Not tainted 3.16.0-rc6-telek #167
[  358.027723] Hardware name: ASUSTeK COMPUTER INC. Z9PE-D8 WS/Z9PE-D8 WS, BIOS 5404 02/10/2014
[  358.027741] task: ffff880897c7d960 ti: ffff88089b4d4000 task.ti: ffff88089b4d4000
[  358.027753] RIP: 0010:[<ffffffff81196040>]  [<ffffffff81196040>] new_slab+0x280/0x320
[  358.027776] RSP: 0018:ffff88089b4d7ae8  EFLAGS: 00010002
[  358.027787] RAX: ffff880897c7d960 RBX: 0000000000000000 RCX: ffff88089b4d7b50
[  358.027798] RDX: 00000000ffffffff RSI: 0000000000000004 RDI: ffff88089f803b00
[  358.027809] RBP: ffff88089b4d7bb8 R08: 0000000000000000 R09: 0000000100400040
[  358.027821] R10: 0000160000000000 R11: ffff88109bc02c40 R12: 0000000000000001
[  358.027832] R13: ffff88089f8000c0 R14: ffff88089f803b00 R15: ffff8810bfcf4be0
[  358.027845] FS:  00007f83fe5c0700(0000) GS:ffff8810bfce0000(0000) knlGS:0000000000000000
[  358.027858] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  358.027868] CR2: 0000000001dfd568 CR3: 0000001097d5a000 CR4: 00000000000407e0
[  358.027878] Stack:
[  358.027885]  ffffffff81198860 ffff8810bfcf4be0 ffff880897c7d960 0000000000001b00
[  358.027905]  ffff880897c7d960 0000000000000000 ffff8810bfcf4bf0 0000000000000000
[  358.027924]  0000000000000000 0000000100000100 ffffffff813ef84a 00000004ffffffff
[  358.027944] Call Trace:
[  358.027956]  [<ffffffff81198860>] ? __slab_alloc+0x400/0x4e0
[  358.027973]  [<ffffffff813ef84a>] ? sg_kmalloc+0x1a/0x30
[  358.027985]  [<ffffffff81198f17>] __kmalloc+0x127/0x150
[  358.027997]  [<ffffffff813ef84a>] ? sg_kmalloc+0x1a/0x30
[  358.028009]  [<ffffffff813ef84a>] sg_kmalloc+0x1a/0x30
[  358.028023]  [<ffffffff813eff84>] __sg_alloc_table+0x74/0x180
[  358.028035]  [<ffffffff813ef830>] ? sg_kfree+0x20/0x20
[  358.028048]  [<ffffffff813f00af>] sg_alloc_table+0x1f/0x60
[  358.028061]  [<ffffffff813f0174>] sg_alloc_table_from_pages+0x84/0x1f0
[  358.028077]  [<ffffffffa007c3f9>] vb2_dma_sg_alloc+0x159/0x230 [videobuf2_dma_sg]
[  358.028095]  [<ffffffffa003d55a>] __vb2_queue_alloc+0x10a/0x680 [videobuf2_core]
[  358.028113]  [<ffffffffa003e110>] __reqbufs.isra.14+0x220/0x3e0 [videobuf2_core]
[  358.028130]  [<ffffffffa003e79d>] __vb2_init_fileio+0xbd/0x380 [videobuf2_core]
[  358.028147]  [<ffffffffa003f563>] __vb2_perform_fileio+0x5b3/0x6e0 [videobuf2_core]
[  358.028164]  [<ffffffffa003f871>] vb2_fop_read+0xb1/0x100 [videobuf2_core]
[  358.028184]  [<ffffffffa06dd2e5>] v4l2_read+0x65/0xb0 [videodev]
[  358.028198]  [<ffffffff811a243f>] vfs_read+0x8f/0x170
[  358.028210]  [<ffffffff811a30a1>] SyS_read+0x41/0xb0
[  358.028224]  [<ffffffff818f02e9>] system_call_fastpath+0x16/0x1b
[  358.028234] Code: 66 90 e9 dc fd ff ff 0f 1f 40 00 41 8b 4d 68 e9 d5 fe ff ff 0f 1f 80 00 00 00 00 f0 41 80 4d 00 40 e9 03 ff ff ff 0f 1f 44 00 00 <0f> 0b 66 0f 1f 44 00 00 44 89 c6 4c 89 45 d0 e8 0c 82 ff ff 48
[  358.028415] RIP  [<ffffffff81196040>] new_slab+0x280/0x320
[  358.028432]  RSP <ffff88089b4d7ae8>
[  358.032208] ---[ end trace 6443240199c706e4 ]---

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: stable@vger.kernel.org      # for v3.13 and up
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 20:44:34 -03:00
Hans Verkuil
1c5eaa23d8 [media] cx23885: fix size helper functions
The norm_swidth function was unused and is dropped. It's not clear
what the purpose of that function was.

The norm_maxh function was changed so it tests for 60 Hz standards
rather than for 50 Hz standards. The is the preferred order.

The norm_maxw function was poorly written and used: it gives the maximum
allowed line width for the given standard. For 60 Hz that's 720, but
for 50 Hz that's 768 which allows for 768x576 which gives you square
pixels. For 60 Hz formats it is 640x480 that gives square pixels, so
there is no need to go beyond 720.

The initial width was set using norm_maxh(), which was wrong. Just set
to 720, that's what you normally use. Since the initial standard was
NTSC anyway the initial width was always 720 anyway.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 20:42:29 -03:00
Hans Verkuil
420b217619 [media] cx23885: fix VBI support
Tested VBI support and discovered that the wrong offset was used.
After this change it is now working. Verified with CC/XDS for NTSC
and WSS/Teletext on PAL.

It also reported the wrong start lines for the second field. That's
now fixed as well.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 20:41:34 -03:00
Hans Verkuil
f8789e6d9c [media] adv7604/adv7842: fix il_vbackporch typo and zero the struct
Both adv7604 and adv7842 had the same typo in the code that sets
the vertical backporch for the second interlaced field: it was
assigned to vbackporch instead of il_vbackporch.

In addition, the timings struct wasn't zeroed in the adv7842 driver,
leaving several fields to undefined values causing the timing match
function to fail.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 20:41:00 -03:00
Hans Verkuil
c166845c9c [media] v4l2-dv-timings: only check standards if non-zero
If one or both of the timings being compared have the standards field
with value 0, then accept that. Only check for matching standards if
both timings have actually filled in that field.

Otherwise no match will ever be found since when timings are detected
the standards field will typically be set to 0 by the driver.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 20:40:33 -03:00
Hans Verkuil
62f28725a8 [media] vivid: add teletext support to VBI capture
This is useful to test teletext capture applications like alevt and mtt.

It also fixes a previously undetected bug where the PAL VBI start line
of the second field was off by one. Using the new field start defines
helps a lot fixing such bugs.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 20:40:05 -03:00
Hans Verkuil
625c3442dc [media] DocBook media: fix wrong prototype
G_EDID is an RW ioctl, so the struct v4l2_edid isn't const.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 20:39:18 -03:00
Guennadi Liakhovetski
e93e7fd9f5 [media] v4l2: uvcvideo: Allow using larger buffers
A test in uvc_video_decode_isoc() checks whether an image has been
received from the camera completely. For this the data amount is compared
to the buffer length, which, however, doesn't have to be equal to the
image size. Switch to using formats .sizeimage field for an exact
expected image size.

[Renamed image_size to frame_size]

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 20:37:55 -03:00
Mauro Carvalho Chehab
720b055d4b [media] hackrf: Fix a long constant
drivers/media/usb/hackrf/hackrf.c:64:3: warning: this decimal constant is unsigned only in ISO C90 [enabled by default]
   .rangehigh  = 4294967294, /* max u32, hw goes over 7GHz */
   ^

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 20:35:47 -03:00
Antti Palosaari
e5ab1477bc [media] MAINTAINERS: add HackRF SDR driver
HackRF SDR driver. Video4Linux USB device.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 20:33:11 -03:00
Antti Palosaari
969ec1f6bd [media] hackrf: HackRF SDR driver
V4L2 driver for HackRF SDR. Very basic version, with reduced
feature set. Driver implements receiver only, hardware supports
also transmitter.

USB ID 1d50:6089. Model HackRF One

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 20:32:37 -03:00