Commit graph

505,617 commits

Author SHA1 Message Date
Alan Stern
50c4e96411 scsi: don't store LUN bits in CDB[1] for USB mass-storage devices
The SCSI specification requires that the second Command Data Byte
should contain the LUN value in its high-order bits if the recipient
device reports SCSI level 2 or below.  Nevertheless, some USB
mass-storage devices use those bits for other purposes in
vendor-specific commands.  Currently Linux has no way to send such
commands, because the SCSI stack always overwrites the LUN bits.

Testing shows that Windows 7 and XP do not store the LUN bits in the
CDB when sending commands to a USB device.  This doesn't matter if the
device uses the Bulk-Only or UAS transports (which virtually all
modern USB mass-storage devices do), as these have a separate
mechanism for sending the LUN value.

Therefore this patch introduces a flag in the Scsi_Host structure to
inform the SCSI midlayer that a transport does not require the LUN
bits to be stored in the CDB, and it makes usb-storage set this flag
for all devices using the Bulk-Only transport.  (UAS is handled by a
separate driver, but it doesn't really matter because no SCSI-2 or
lower device is at all likely to use UAS.)

The patch also cleans up the code responsible for storing the LUN
value by adding a bitflag to the scsi_device structure.  The test for
whether to stick the LUN value in the CDB can be made when the device
is probed, and stored for future use rather than being made over and
over in the fast path.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Tiziano Bacocco <tiziano.bacocco@gmail.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-15 16:01:58 -07:00
Kashyap.Desai@avagotech.com
64bdcbc449 scsi: add use_cmd_list flag
Add a use_cmd_list flag in struct Scsi_Host to request keeping track of
all outstanding commands per device.

Default behaviour is not to keep track of cmd_list per sdev, as this may
introduce lock contention. (overhead is more on multi-node NUMA.), and
only enable it on the two drivers that need it.

Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-15 16:01:58 -07:00
Sujit Reddy Thumma
2eefd57b97 sd: Avoid sending medium write commands if device is write protected
The SYNCHRONIZE_CACHE command is a medium write command and hence can
fail when the device is write protected. Avoid sending such commands by
making sure that write-cache-enable is disabled even though the device
claim to support it.

Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Signed-off-by: Dolev Raviv <draviv@codeaurora.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Venkatesh Srinivas <venkateshs@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-15 16:01:57 -07:00
Randy Dunlap
74cf298fed scsi: fix various kernel-doc problems in scsi_error.c
Convert spaces to tabs in kernel-doc notation.
Correct duplicated (copy-paste) kernel-doc comments that are incorrect.
Fix kernel-doc warning:

Warning(..//drivers/scsi/scsi_error.c:1647): No description found for parameter 'shost'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-15 16:01:57 -07:00
Linus Torvalds
b92178623f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
 "A few quirks for i8042/AT keyboards and a small device tree doc fix
  for Atmel Touchscreens"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: atmel_mxt_ts - fix merge in DT documentation
  Input: i8042 - also set the firmware id for MUXed ports
  Input: i8042 - add nomux quirk for Avatar AVIU-145A6
  Input: i8042 - add Fujitsu U574 to no_timeout dmi table
  Input: atkbd - do not try 'deactivate' keyboard on any LG laptops
2014-09-15 15:12:01 -07:00
Mark Brown
f7667af217 Merge remote-tracking branches 'asoc/fix/cs4265', 'asoc/fix/davinci', 'asoc/fix/rockchip', 'asoc/fix/samsung' and 'asoc/fix/tlv320aic31xx' into asoc-linus 2014-09-15 15:05:34 -07:00
Mark Brown
af0f2ceadf Merge remote-tracking branch 'asoc/fix/pcm' into asoc-linus 2014-09-15 15:05:33 -07:00
Mark Brown
8dbc895067 Merge remote-tracking branch 'asoc/fix/core' into asoc-linus 2014-09-15 15:05:33 -07:00
Florian Fainelli
c1f570a6ab net: dsa: fix mii_bus to host_dev replacement
dsa_of_probe() still used cd->mii_bus instead of cd->host_dev when
building with CONFIG_OF=y. Fix this by making the replacement here as
well.

Fixes: b4d2394d01 ("dsa: Replace mii_bus with a generic host device")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 17:52:48 -04:00
WANG Cong
10ee1c34be net_sched: use tcindex_filter_result_init()
Fixes: commit 331b72922c ("net: sched: RCU cls_tcindex")
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 17:51:18 -04:00
WANG Cong
2f9a220eff net_sched: fix suspicious RCU usage in tcindex_classify()
This patch fixes the following kernel warning:

[   44.805900] [ INFO: suspicious RCU usage. ]
[   44.808946] 3.17.0-rc4+ #610 Not tainted
[   44.811831] -------------------------------
[   44.814873] net/sched/cls_tcindex.c:84 suspicious rcu_dereference_check() usage!

Fixes: commit 331b72922c ("net: sched: RCU cls_tcindex")
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 17:49:42 -04:00
Heiko Stuebner
3415d60113 regulator: fan53555: enable vin supply
The regulator can be supplied by a parent regulator through its vin pin,
so add the supply_name for it.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-15 14:49:35 -07:00
Oder Chiou
e5b2791d2a ASoC: rt5677: Revise the wrong name in the header file
The patch revises the wrong name in the header file.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-15 14:48:58 -07:00
WANG Cong
a57a65ba47 net_sched: fix an allocation bug in tcindex_set_parms()
Fixes: commit 331b72922c ("net: sched: RCU cls_tcindex")
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 17:48:23 -04:00
David S. Miller
fe42048e2a Merge branch 'bnx2-deps'
Anish Bhatt says:

====================
net: Fix randconfig errros in bnx2i/bnx2fc caused by IPV6

Just like CNIC bnx2i/bnx2fc also have their tristate dependent on IPV6, however
using the same solution as CNIC can cause recursive dependecies during make.

Based on suggestions by Randy Dunlap, SCSI_NETLINK now depends on NET instead
 of selecting NET. Second patch fixes the actual randconfig error.

Entire thread can be followed here : https://lkml.org/lkml/2014/9/9/500

Fixes: c99d667e85 ("cnic : Cleanup CONFIG_IPV6 & VLAN check")
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 17:45:23 -04:00
Anish Bhatt
23a3c99201 bnx2i/bnx2fc : fix randconfig error in next-20140909
Just like CNIC, tristate of these two modules is also dependent on IPV6.
These need to be handled separately as they select CNIC, which can override
tristate for CNIC from 'm' to 'y', which can cause build failures when ipv6 is
 compiled as a module even if CNIC's Kconfig will only 'm' or 'n' when ipv6 is
compiled as a module.

Fixes: c99d667e85 ("cnic : Cleanup CONFIG_IPV6 & VLAN check")
Signed-off-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 17:45:18 -04:00
Anish Bhatt
5d6be6a5d4 scsi_netlink : Make SCSI_NETLINK dependent on NET instead of selecting NET
Required for avoiding recursive dependencies in the Kconfig, brought out
by fixing randconfig error for bnx2i/bnx2fc in the patch that follows.
As suggested by Randy Dunlap

Signed-off-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 17:45:18 -04:00
Hariprasad Shenai
d6ce2628f3 cxgb4: Don't allocate adapter structure for all PF's
commit 35b1de5579 ("rdma/cxgb4: Fixes cxgb4 probe failure in VM when PF is
exposed through PCI Passthrough") moved the code to check for SR-IOV PF[0..3]
much further down in init_one() past the point where we allocate a (struct
adapter) for PF[0..3]. As a result, we left four of these on ever module remove.

Fix: Allocate adapter structure only for PF4

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 17:42:59 -04:00
WANG Cong
80dcbd12fb net_sched: fix suspicious RCU usage in cls_bpf_classify()
Fixes: commit 1f947bf151 ("net: sched: rcu'ify cls_bpf")
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 17:42:08 -04:00
Vlad Yasevich
c095f248e6 bridge: Fix br_should_learn to check vlan_enabled
As Toshiaki Makita pointed out, the BRIDGE_INPUT_SKB_CB will
not be initialized in br_should_learn() as that function
is called only from br_handle_local_finish().  That is
an input handler for link-local ethernet traffic so it perfectly
correct to check br->vlan_enabled here.

Reported-by: Toshiaki Makita<toshiaki.makita1@gmail.com>
Fixes: 20adfa1 bridge: Check if vlan filtering is enabled only once.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 17:38:30 -04:00
Nishanth Menon
05f7588c3c Input: palmas-pwrbutton - fix typo in the license string
Follow the license string convention indicated in include/linux/module.h
(don't capitalize v).

This fixes following randconfig warning:
FATAL: modpost: GPL-incompatible module palmas-pwrbutton.ko uses GPL-only symbol 'platform_driver_unregister'

Fixes: adff5962fd ("Input: introduce palmas-pwrbutton")
Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-15 14:36:12 -07:00
Nishanth Menon
5cc19b7c5e Input: palmas-pwrbutton - use IRQF_ONESHOT
make C=2 CHECK="scripts/coccicheck" MODE=report COCCI=scripts/coccinelle/misc/irqf_oneshot.cocci ./drivers/input/misc/palmas-pwrbutton.o
Reports:
drivers/input/misc/palmas-pwrbutton.c:213:9-29: ERROR: Threaded IRQ with no primary handler requested without IRQF_ONESHOT

Palmas power button just needs threaded IRQ handler since I2C operations
are involved and there is nothing in non-threaded primary handler we could
do.

So mark the request with ONESHOT as it should have been done in these
cases.

Fixes: adff5962fd ("Input: introduce palmas-pwrbutton")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-15 14:36:12 -07:00
Hans de Goede
3ace3686f1 Input: psmouse - add support for detecting FocalTech PS/2 touchpads
The Asus X450 and X550 laptops use a PS/2 touchpad from a new
manufacturer called FocalTech:

https://bugzilla.kernel.org/show_bug.cgi?id=77391
https://bugzilla.redhat.com/show_bug.cgi?id=1110011

The protocol for these devices is not known at this time, but even
without knowing the protocol they need some special handling. They get
upset by some of our other PS/2 device probing, and once upset generate
random mouse events making things unusable even with an external mouse.

This patch adds detection of these devices based on their pnp ids, and
when they are detected, treats them as a bare ps/2 mouse. Doing things
this way they at least work in their ps/2 mouse emulation mode.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-15 14:30:46 -07:00
Rasmus Villemoes
c6c2a3de36 target: target_core_ua_h: Add #define of include guard
Clearly the file was meant to contain an include guard, but it was
missing the #define part.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-09-15 14:27:43 -07:00
Andreea-Cristina Bernat
c04047ecee tcm_fc: Replace rcu_assign_pointer() with RCU_INIT_POINTER()
The use of "rcu_assign_pointer()" is NULLing out the pointer.
According to RCU_INIT_POINTER()'s block comment:
"1.   This use of RCU_INIT_POINTER() is NULLing out the pointer"
it is better to use it instead of rcu_assign_pointer() because it has a
smaller overhead.

The following Coccinelle semantic patch was used:
@@
@@

- rcu_assign_pointer
+ RCU_INIT_POINTER
  (..., NULL)

Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-09-15 14:27:33 -07:00
David S. Miller
0486b60a8c Merge branch 'dsa-next'
Alexander Duyck says:

====================
DSA Cleanups

This patch series does two things, first it cleans up the tag_protocol and
protocol ops being configured seperately.  Second it addresses the desire
to split DSA away from relying on a MII bus.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 17:24:29 -04:00
Alexander Duyck
b4d2394d01 dsa: Replace mii_bus with a generic host device
This change makes it so that instead of passing and storing a mii_bus we
instead pass and store a host_dev.  From there we can test to determine the
exact type of device, and can verify it is the correct device for our switch.

So for example it would be possible to pass a device pointer from a pci_dev
and instead of checking for a PHY ID we could check for a vendor and/or device
ID.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 17:24:20 -04:00
Alexander Duyck
5075314e4e dsa: Split ops up, and avoid assigning tag_protocol and receive separately
This change addresses several issues.

First, it was possible to set tag_protocol without setting the ops pointer.
To correct that I have reordered things so that rcv is now populated before
we set tag_protocol.

Second, it didn't make much sense to keep setting the device ops each time a
new slave was registered.  So by moving the receive portion out into root
switch initialization that issue should be addressed.

Third, I wanted to avoid sending tags if the rcv pointer was not registered
so I changed the tag check to verify if the rcv function pointer is set on
the root tree.  If it is then we start sending DSA tagged frames.

Finally I split the device ops pointer in the structures into two spots.  I
placed the rcv function pointer in the root switch since this makes it
easiest to access from there, and I placed the xmit function pointer in the
slave for the same reason.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 17:24:20 -04:00
Himangi Saraogi
e1ea97fef0 target/configfs: Remove unnecessary null test
This patch removes the null test on lun_cg. lun_cg is initialized
at the beginning of the function to &lun->lun_group. Since lun_cg is
dereferenced prior to the null test, it must be a valid pointer.

The following Coccinelle script is used for detecting the change:

@r@
expression e,f;
identifier g,y;
statement S1,S2;
@@

*e = &f->g
<+...
 f->y
 ...+>
*if (e != NULL || ...)
 S1 else S2

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-09-15 14:20:00 -07:00
David S. Miller
6cca9adb78 Merge branch 'bonding-cleanups'
Nikolay Aleksandrov says:

====================
bonding: style, comment and assertion changes

This is a small and simple patch-set that doesn't introduce (hopefully) any
functional changes, but only stylistic and semantic ones.
Patch 01 simply uses the already provided __rlb_next_rx_slave function inside
rlb_next_rx_slave(), thus removing the duplication of code.
Patch 02 changes all comments that I could find to netdev style, removes
some outdated ones and fixes a few more small cosmetic issues (new line
after declaration, braces around if; else and such)
Patch 03 removes one extra ASSERT_RTNL() because we already have it in the
parent function and consolidates two other ASSERT_RTNL()s to the function
that is exported and supposed to be called with RTNL anyway.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 17:19:55 -04:00
Nikolay Aleksandrov
e0974585e7 bonding: consolidate ASSERT_RTNL()s and remove the unnecessary
Consolidate the calls to ASSERT_RTNL() before bond_select_active_slave()
inside bond_select_active_slave() itself and remove the ASSERT_RTNL()
from bond_hw_addr_swap() as it's not exported and its only caller -
bond_change_active_slave() already has an ASSERT_RTNL().

Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 17:19:50 -04:00
Nikolay Aleksandrov
547942cace bonding: trivial: style and comment fixes
First adjust a couple of locking comments that were left inaccurate,
then adjust comments to use the netdev styling and remove extra new
lines where necessary and add a couple of new lines between declarations
and code. These are all trivial styling changes, no functional change.
Also removed a couple of outdated or obvious comments.
This patch is by no means a complete fix of all netdev style violations
but it gets the bonding closer.

Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 17:19:49 -04:00
Nikolay Aleksandrov
56924c3811 bonding: consolidate the two rlb_next_rx_slave functions into one
__rlb_next_rx_slave() is a copy of rlb_next_rx_slave() with the
difference that it uses rcu primitives to walk the slave list. We don't
need the two functions and can make rlb_next_rx_slave() a wrapper for
callers which hold RTNL.
So add a comment and ASSERT_RTNL() to make sure what is intended.

Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 17:19:49 -04:00
Christoph Hellwig
4b8c6ba616 scsi: fix regression that accidentally disabled block-based tcq
Please try the fix below, looks like the commit broke TCQ for all drivers
using block-level tagging.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-15 14:11:20 -07:00
Mike Christie
cbaa422134 libiscsi: fix potential buffer overrun in __iscsi_conn_send_pdu
This patches fixes a potential buffer overrun in __iscsi_conn_send_pdu.
This function is used by iscsi drivers and userspace to send iscsi PDUs/
commands. For login commands, we have a set buffer size. For all other
commands we do not support data buffers.

This was reported by Dan Carpenter here:
http://www.spinics.net/lists/linux-scsi/msg66838.html

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-15 14:11:20 -07:00
Nicholas Bellinger
3687db882d iscsi-target: Ignore ICF_GOT_LAST_DATAOUT during Data-Out ITT lookup
This patch adds a explicit check in iscsit_find_cmd_from_itt_or_dump()
to ignore commands with ICF_GOT_LAST_DATAOUT set.  This is done to
address the case where an ITT is being reused for DataOUT, but the
previous command with the same ITT has not yet been acknowledged by
ExpStatSN and removed from the per connection command list.

This issue was originally manifesting itself by referencing the
previous command during ITT lookup, and subsequently hitting the
check in iscsit_check_dataout_hdr() for ICF_GOT_LAST_DATAOUT, that
resulted in the DataOUT PDU + associated payload being silently
dumped.

Reported-by: Arshad Hussain <arshad.hussain@calsoftinc.com>
Tested-by: Arshad Hussain <arshad.hussain@calsoftinc.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-09-15 14:03:06 -07:00
Sagi Grimberg
1a92e17e39 Target/iser: Fix initiator_depth and responder_resources
The iser target is the RDMA requester and the iser initiator is the
RDMA responder. In order to determine the max inflight RDMA READ requests
to set on the QP (initiator_depth), it should take the min between the
initiator published initiator_depth and the max inflight rdma read
requests its local HCA support (max_qp_init_rd_atom).

The target will never handle incoming RDMA READ requests so no need to
set responder_resources.

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-09-15 14:02:55 -07:00
Sagi Grimberg
38a8316b5d Target/iser: Avoid calling rdma_disconnect twice
rdma_disconnect may be called in 2 code flows:
- isert_wait_conn: disconnect initiated be the target
- disconnected_handler: disconnect invoked by the initiator

In case isert_conn->disconnect is true then rdma_disconnect
was called in disconnected handler, no need to call it again
from isert_wait_conn.

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-09-15 14:02:30 -07:00
Sagi Grimberg
0fc4ea701f Target/iser: Don't put isert_conn inside disconnected handler
disconnected_handler is invoked on several CM events (such
as DISCONNECTED, DEVICE_REMOVAL, TIMEWAIT_EXIT...). Since
multiple  events can occur while before isert_free_conn is
invoked, we might put all isert_conn references and free
the connection too early.

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-09-15 14:02:16 -07:00
Sagi Grimberg
c2f88b17a1 Target/iser: Get isert_conn reference once got to connected_handler
In case the connection didn't reach connected state, disconnected
handler will never be invoked thus the second kref_put on
isert_conn will be missing.

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-09-15 14:02:02 -07:00
Dave Airlie
4ac073640a Merge branch 'linux-3.18' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next
This is the main merge request for Nouveau 3.18, overview:
- various bits of roy's gt21x clock work
- various bits of kepler memory clock work (don't get too excited, there's at least one more major bit left that's busting higher freqs)
- misc fan control improvements
- kepler hdmi infoframe fixes
- dp audio
- l2 cache + cbc improvements

* 'linux-3.18' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (68 commits)
  drm/gt214-/disp: enable dp audio
  drm/gt214-/kms: fix hda eld regression
  drm/g94-/disp: calculate some dp audio constants
  drm/gt214-/kms: perform hda codec setup on displayport too
  drm/gk104-/disp: infoframe registers moved yet again on kepler
  drm/nouveau/bios: parse older ramcfg/timing data like we do newer ones
  drm/nva3/fb/ram: Per-partition regs
  drm/nouveau/fb/ram: Support strided regs
  drm/nv50/fb/ram: Store the number of partitions in the designated fields
  drm/nv50/kms: Set VBLANK time in modeset script
  drm/nouveau/bios: Add rammap support for version 1.0
  drm/gf100-/pwr/memx: block host and fifo around reclock
  drm/nouveau/pwr/memx: fix command ordering around block/unblock
  drm/nouveau/pwr/memx: rename fb off/on to block/unblock
  drm/nva3/clk: Pause the GPU before reclocking
  drm/nouveau/gpio: rename g92 class to g94
  drm/gk104-/fb/ram: move fb enable/disable to same place as nvidia
  drm/gk104/fb/ram: twiddle some more bits when reclocking
  drm/nouveau/bios: parse another large chunk of random memory config data
  drm/gk104-/fb/ram: perform certain steps only when bios data differs
  ...
2014-09-16 06:20:53 +10:00
Jozsef Kadlecsik
07034aeae1 netfilter: ipset: hash:mac type added to ipset
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
2014-09-15 22:20:21 +02:00
Jozsef Kadlecsik
aef96193fe netfilter: ipset: send nonzero skbinfo extensions only
Do not send zero valued skbinfo extensions to userspace at listing.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
2014-09-15 22:20:21 +02:00
Anton Danilov
76cea4109c netfilter: ipset: Add skbinfo extension support to SET target.
Signed-off-by: Anton Danilov <littlesmilingcloud@gmail.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
2014-09-15 22:20:21 +02:00
Anton Danilov
cbee93d7b7 netfilter: ipset: Add skbinfo extension kernel support for the list set type.
Add skbinfo extension kernel support for the list set type.
Introduce the new revision of the list set type.

Signed-off-by: Anton Danilov <littlesmilingcloud@gmail.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
2014-09-15 22:20:20 +02:00
Anton Danilov
af331419d3 netfilter: ipset: Add skbinfo extension kernel support for the hash set types.
Add skbinfo extension kernel support for the hash set types.
Inroduce the new revisions of all hash set types.

Signed-off-by: Anton Danilov <littlesmilingcloud@gmail.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
2014-09-15 22:20:20 +02:00
Anton Danilov
39d1ecf1ad netfilter: ipset: Add skbinfo extension kernel support for the bitmap set types.
Add skbinfo extension kernel support for the bitmap set types.
Inroduce the new revisions of bitmap_ip, bitmap_ipmac and bitmap_port set types.

Signed-off-by: Anton Danilov <littlesmilingcloud@gmail.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
2014-09-15 22:20:20 +02:00
Anton Danilov
0e9871e3f7 netfilter: ipset: Add skbinfo extension kernel support in the ipset core.
Skbinfo extension provides mapping of metainformation with lookup in the ipset tables.
This patch defines the flags, the constants, the functions and the structures
for the data type independent support of the extension.
Note the firewall mark stores in the kernel structures as two 32bit values,
but transfered through netlink as one 64bit value.

Signed-off-by: Anton Danilov <littlesmilingcloud@gmail.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
2014-09-15 22:20:20 +02:00
Jozsef Kadlecsik
73e64e1813 netfilter: ipset: Fix static checker warning in ip_set_core.c
Dan Carpenter reported the following static checker warning:

        net/netfilter/ipset/ip_set_core.c:1414 call_ad()
        error: 'nlh->nlmsg_len' from user is not capped properly

The payload size is limited now by the max size of size_t.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
2014-09-15 22:20:20 +02:00
Bjorn Helgaas
6de8eee17a Merge branch 'pci/hotplug-vga' into for-linus
* pci/hotplug-vga:
  ACPIPHP / radeon / nouveau: Remove acpi_bus_no_hotplug()
  PCI: Add pci_ignore_hotplug() to ignore hotplug events for a device
2014-09-15 13:18:36 -06:00