Commit graph

505,617 commits

Author SHA1 Message Date
Zhaowei Yuan
e47ccb1de5 [media] media: s5p-mfc: correct improper logs
This patch corrects improper logs within the code initializing hardware.

Signed-off-by: Zhaowei Yuan <zhaowei.yuan@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03 09:03:57 -03:00
Zhaowei Yuan
6c5c680b85 [media] media: s5p_mfc: Release ctx->ctx if failed to allocate ctx->shm
ctx->ctx should be released if the following allocation for ctx->shm
gets failed.

Signed-off-by: Zhaowei Yuan <zhaowei.yuan@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03 09:03:32 -03:00
Naveen Krishna Chatradhi
bc64690e35 irqchip: exynos-combiner: Fix compilation error on ARM64
The following compilation error occurs on 64-bit Exynos7 SoC:

drivers/irqchip/exynos-combiner.c: In function ‘combiner_irq_domain_map’:
drivers/irqchip/exynos-combiner.c:162:2: error: implicit declaration of function ‘set_irq_flags’ [-Werror=implicit-function-declaration]
  set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
  ^
drivers/irqchip/exynos-combiner.c:162:21: error: ‘IRQF_VALID’ undeclared (first use in this function)
  set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
                     ^
drivers/irqchip/exynos-combiner.c:162:21: note: each undeclared identifier is reported only once for each function it appears in
drivers/irqchip/exynos-combiner.c:162:34: error: ‘IRQF_PROBE’ undeclared (first use in this function)
  set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);

Fix the build error by including linux/interrupt.h.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lkml.kernel.org/r/1409722329-18309-1-git-send-email-ch.naveen@samsung.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-09-03 11:56:39 +00:00
Lars-Peter Clausen
016da14439 gpio: zynq: Take bank offset into account when reporting a IRQ
When looking up the IRQ the bank offset needs to be taken into account.
Otherwise interrupts for banks other than bank 0 get incorrectly reported as
interrupts for bank 0.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-03 13:56:31 +02:00
Hans Verkuil
c44b6484db [media] solo6x10: fix sparse warnings
drivers/media/pci/solo6x10/solo6x10-disp.c:184:24: warning: incorrect type in assignment (different base types)
drivers/media/pci/solo6x10/solo6x10-disp.c:223:32: warning: incorrect type in assignment (different base types)

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03 08:55:39 -03:00
Hans Verkuil
3ee733ea9c [media] img-ir: fix sparse warnings
drivers/media/rc/img-ir/img-ir-nec.c:111:23: warning: symbol 'img_ir_nec' was not declared. Should it be static?
drivers/media/rc/img-ir/img-ir-jvc.c:54:23: warning: symbol 'img_ir_jvc' was not declared. Should it be static?
drivers/media/rc/img-ir/img-ir-sony.c:120:23: warning: symbol 'img_ir_sony' was not declared. Should it be static?
drivers/media/rc/img-ir/img-ir-sharp.c:75:23: warning: symbol 'img_ir_sharp' was not declared. Should it be static?
drivers/media/rc/img-ir/img-ir-sanyo.c:82:23: warning: symbol 'img_ir_sanyo' was not declared. Should it be static?

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03 08:54:27 -03:00
Geert Uytterhoeven
5b5a9069e8 MAINTAINERS: Add irqchip DT bindings doc path to IRQCHIP DRIVERS section
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lkml.kernel.org/r/1409212607-4021-1-git-send-email-geert+renesas@glider.be
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-09-03 11:53:07 +00:00
Hans Verkuil
6a03dc92cc [media] cx18: fix kernel oops with tda8290 tuner
This was caused by an uninitialized setup.config field.

Based on a suggestion from Devin Heitmueller.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Thanks-to: Devin Heitmueller <dheitmueller@kernellabs.com>
Reported-by: Scott Robinson <scott.robinson55@gmail.com>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: stable@vger.kernel.org      # for v3.10 and up
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03 08:53:02 -03:00
Sakari Ailus
60b31b72d8 [media] smiapp: Set sub-device owner
The smiapp driver is the owner of the sub-devices exposed by the smiapp
driver. This prevents unloading the module whilst it's in use.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03 08:50:25 -03:00
Sakari Ailus
58e43d90b9 [media] smiapp: Fix power count handling
The sensor may be powered by either one of its sub-devices being accessed
from the user space (an open file handle) or by its s_power() op being
called with non-zero on argument. The driver counts the users and if any
reason to keep the device powered exists it will be powered.

However, a faulty condition was used in recognising the need to power off
the sensor, leading it to be powered off every time any of its uses went
away.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03 08:50:25 -03:00
Grygorii Strashko
8703ec19c7 irqchip: keystone: Remove warning unsigned 'kirq->irq' is never less than zero
Remove static checker warning:

	drivers/irqchip/irq-keystone.c:166 keystone_irq_probe()
	warn: unsigned 'kirq->irq' is never less than zero.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lkml.kernel.org/r/1409246189-29727-1-git-send-email-grygorii.strashko@ti.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-09-03 11:48:44 +00:00
Michal Kazior
4549cf2b18 mac80211: fix offloaded BA session traffic after hw restart
When starting an offloaded BA session it is
unknown what starting sequence number should be
used. Using last_seq worked in most cases except
after hw restart.

When hw restart is requested last_seq is
(rightfully so) kept unmodified. This ended up
with BA sessions being restarted with an aribtrary
BA window values resulting in dropped frames until
sequence numbers caught up.

Instead of last_seq pick seqno of a first Rxed
frame of a given BA session.

This fixes stalled traffic after hw restart with
offloaded BA sessions (currently only ath10k).

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-03 13:40:38 +02:00
Hans Verkuil
0310539723 [media] cx23885: remove FSF address as per checkpatch
These addresses are usually out-of-date and the top-level license will
always have the right address. So drop it from these sources.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03 08:35:55 -03:00
Hans Verkuil
568f44a18e [media] cx23885: use video_drvdata to get cx23885_dev pointer
Use video_drvdata(file) instead of fh->dev to get the cx23885_dev
pointer. This prepares for the vb2 conversion where fh->dev (renamed
to fh->q_dev in this patch) will be removed completely.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03 07:57:38 -03:00
Hans Verkuil
9529a4b0cf [media] cx23885: drop videobuf abuse in cx23885-alsa
The alsa driver uses videobuf low-level functions that are not
available in vb2, so replace them by driver-specific functions.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03 07:56:36 -03:00
Hans Verkuil
91d2d67452 [media] cx23885: fmt, width and height are global, not per-fh
Move these fields from cx23885_fh to cx23885_dev.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03 07:55:24 -03:00
Hans Verkuil
e749c6e64c [media] cx23885: drop unused clip fields from struct cx23885_fh
There is no overlay support, so drop these unused fields.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03 07:53:52 -03:00
Hans Verkuil
1f159c77d0 [media] cx23885: drop type field from struct cx23885_fh
This information is available elsewhere as well.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03 07:53:27 -03:00
Hans Verkuil
8696193320 [media] cx23885: drop radio-related dead code
Currently no radio device nodes are ever created, so remove the dead radio
code.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03 07:52:24 -03:00
Hans Verkuil
200e0841ee [media] cx23885: map invalid fields to a valid field
If field format is not valid, map it as V4L2_FIELD_INTERLACED,
instead of pretending to support an invalid format.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03 07:51:40 -03:00
Hans Verkuil
1af2ddd8b3 [media] cx23885: fix format colorspace compliance error
Fix v4l2-compliance failure relating to formatting.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03 07:50:18 -03:00
Hans Verkuil
5150392cd9 [media] cx23885: convert 417 to the control framework
Convert the -417 source to the control framework as well.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03 07:49:31 -03:00
Hans Verkuil
da59a4deb2 [media] cx23885: convert to the control framework
This is part 1, converting the uncompressed video/vbi nodes to use
the control framework.

The next patch converts the compressed video node as well.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03 07:48:55 -03:00
Hans Verkuil
24a8f7b564 [media] cx23885: use core locking, switch to unlocked_ioctl
Enable core locking which allows us to safely switch to unlocked_ioctl.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03 07:47:21 -03:00
Hans Verkuil
86dd9831ae [media] cx23885: support v4l2_fh and g/s_priority
Add support for struct v4l2_fh and priority handling.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03 07:45:22 -03:00
Hans Verkuil
d43be757b9 [media] cx23885: fix audio input handling
Fix a bunch of v4l2-compliance errors relating to audio input handling.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03 07:44:30 -03:00
Hans Verkuil
a7d3eabd77 [media] cx23885: fix querycap
Set device_caps to fix the v4l2-compliance QUERYCAP complaints.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03 07:42:12 -03:00
Damien Lespiau
fd34f90c60 drm/i915: Don't restrict i915_wa_registers to BDW
We have CHV code that already makes the test obsolete. Besides, when
num_wa_regs is 0 (platforms not gathering that W/A data), we expose
something sensible already.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-03 12:39:17 +02:00
Damien Lespiau
b07ba1dc78 drm/i915: Remove unneeded brackets
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-03 12:39:10 +02:00
Damien Lespiau
04ad2dc711 drm/i915: Don't silently discard workarounds
If we happen to emit more than I915_MAX_WA_REGS workarounds, we will
currently discard them, not even emit the LRI. Not really what we want,
so warn loudly.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-03 12:39:03 +02:00
Damien Lespiau
55820e1e84 drm/i915: Don't overrun the intel_wa_regs array
When entering intel_ring_emit_wa() with num_wa_regs equal to
I915_MAX_WA_REGS, we end up indexing the intel_wa_regs array beyond its
allocation.

Fix the check then.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-03 12:38:54 +02:00
Damien Lespiau
1ed1ef9dd9 drm/i915: Rename intel_wa_registers with a i915_ prefix
Those debugfs files are prefixed by i915, the name of the kernel module,
presumably to make the difference with files exposed by core DRM.

Also, add a ',' at the end of the last entry. This is to ease the
conflict resolution when rebasing internal patches that add a member at
the end of the array. Without it, wiggle can't do its job as we need to
modify an existing line (appending the ',').

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-03 12:38:33 +02:00
Paulo Zanoni
059b2fe9d8 drm/i915: change CHV write_eld/global_resources function pointers
Currently, CHV is using the same functions as HSW/BDW instead of the
same functions as VLV. This looks wrong, especially since, for
example, valleyview_modeset_global_resouces even has an IS_CHERRYVIEW
check.

This patch has the potential to fix display audio and the CHV CDCLK.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-03 12:37:01 +02:00
Chris Wilson
953ece6971 drm/i915/hdmi: Cache EDID for a detection cycle
As we may query the edid multiple times following a detect, record the
EDID found during output discovery and reuse it. This is a separate
issue from caching the output EDID across detection cycles.

v2: Also hookup the force() callback for audio detection when the user
forces the connection status.
v3: Ville spots a typo, s/==/!=/

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-03 12:37:01 +02:00
Chris Wilson
beb6060847 drm/i915/dp: Cache EDID for a detection cycle
As we may query the edid multiple times following a detect, record the
EDID found during output discovery and reuse it. This is a separate
issue from caching the output EDID across detection cycles.

v2: Implement connector->force() callback so that edid is associated
with the connector for user overrides as well (Ville)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-03 12:37:00 +02:00
Chris Wilson
d410b56d74 drm/i915/dp: Refactor common eDP lid detection
Both gmch and pch detection routines used the exact same routine for
eDP, so de-duplicate.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: : Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-03 12:36:59 +02:00
David Henningsson
aec856d0a8 ALSA: hda - Make the ALC269 pin quirk table shorter
...by factoring out common parts to the just added pin macros.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-03 11:36:29 +02:00
David Henningsson
fea185e28e ALSA: hda - Add common pin macros for ALC269 family
This will be used in a later patch to make the pin quirk table shorter.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-03 11:36:00 +02:00
Johannes Berg
bd8c78e78d nl80211: clear skb cb before passing to netlink
In testmode and vendor command reply/event SKBs we use the
skb cb data to store nl80211 parameters between allocation
and sending. This causes the code for CONFIG_NETLINK_MMAP
to get confused, because it takes ownership of the skb cb
data when the SKB is handed off to netlink, and it doesn't
explicitly clear it.

Clear the skb cb explicitly when we're done and before it
gets passed to netlink to avoid this issue.

Cc: stable@vger.kernel.org [this goes way back]
Reported-by: Assaf Azulay <assaf.azulay@intel.com>
Reported-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-03 11:13:14 +02:00
Sonika Jindal
26db63e3cb drm: Remove old defines for vswing and pre-emph values
This is the last patch in the series, so remove old defines

Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-03 11:05:44 +02:00
Sonika Jindal
bd60018af3 drm/i915: Renaming DP training vswing pre emph defines
Rename the defines to have levels instead of values for vswing and
pre-emph levels as the values may differ in other scenarios like low vswing of
eDP1.4 where the values are different.

Done using following cocci patch for each define:
@@
@@

 # define DP_TRAIN_VOLTAGE_SWING_400     (0 << 0)
+ # define DP_TRAIN_VOLTAGE_SWING_LEVEL_0     (0 << 0)

...

Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-03 11:05:43 +02:00
Sonika Jindal
eeb82a5cdb drm/tegra: Renaming DP training vswing pre emph defines
Rename the defines to have levels instead of values for vswing and
pre-emph levels as the values may differ in other scenarios like low vswing of
eDP1.4 where the values are different.

Done using following cocci patch for each define:
@@
@@

 # define DP_TRAIN_VOLTAGE_SWING_400     (0 << 0)
+ # define DP_TRAIN_VOLTAGE_SWING_LEVEL_0     (0 << 0)

...

Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-03 11:05:41 +02:00
Sonika Jindal
9cecb371cf drm/radeon: Renaming DP training vswing pre emph defines
Rename the defines to have levels instead of values for vswing and
pre-emph levels as the values may differ in other scenarios like low vswing of
eDP1.4 where the values are different.

Done using following cocci patch for each define:
@@
@@

 # define DP_TRAIN_VOLTAGE_SWING_1200     (3 << 0)
+ # define DP_TRAIN_VOLTAGE_SWING_LEVEL_3     (0 << 0)

...

Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Acked-by: Alex Deucher <alexdeucher@gmail.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-03 11:05:39 +02:00
Sonika Jindal
31160006f8 drm/gma500: Renaming DP training vswing pre emph defines
Rename the defines to have levels instead of values for vswing and
pre-emph levels as the values may differ in other scenarios like low vswing of
eDP1.4 where the values are different.

Done using following cocci patch for each define:
@@
@@

 # define DP_TRAIN_VOLTAGE_SWING_400     (0 << 0)
+ # define DP_TRAIN_VOLTAGE_SWING_LEVEL_0     (0 << 0)

...

Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-03 11:05:38 +02:00
Sonika Jindal
0ded925435 drm/exynos: Renaming DP training vswing pre emph defines
Rename the defines to have levels instead of values for vswing and
pre-emph levels as the values may differ in other scenarios like low vswing of
eDP1.4 where the values are different.

Done using following cocci patch for each define:
@@
@@

 # define DP_TRAIN_VOLTAGE_SWING_400     (0 << 0)
+ # define DP_TRAIN_VOLTAGE_SWING_LEVEL_0     (0 << 0)

...

Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-03 11:05:36 +02:00
Sonika Jindal
0504cd170c drm: Renaming DP training vswing pre emph defines
Adding new defines, older one will be removed in the last patch in the series.
This is to rename the defines to have levels instead of values for vswing and
pre-emph levels as the values may differ in other scenarios like low vswing of
eDP1.4 where the values are different.

Done using following cocci patch for each define:
@@
@@

 # define DP_TRAIN_VOLTAGE_SWING_400     (0 << 0)
+ # define DP_TRAIN_VOLTAGE_SWING_LEVEL_0     (0 << 0)

...
Cc: dri-devel@lists.freedesktop.org

Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-03 11:05:34 +02:00
Jani Nikula
f9cac7218a drm/i915: debug sink dpms aux errors also on enable
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-03 11:05:33 +02:00
Ville Syrjälä
09dba00c00 drm/i915: Don't call intel_plane_restore() when the prop value didn't change
No point in calling intel_plane_restore() in .set_property() if the
value didn't change.

More importantly this papers over a bug where the current primary plane
code forgets to update the user coordinates we store under intel_plane
unless the primary plane .update_plane() hook is actually called. This
means we have 0 in the coordinates straight after boot and any call
to intel_restore_plane() (such as from restore_fbdev_mode()) will
actually turn off the primary plane. This mess needs to be fixed properly
but that's a bigger task and the first step there is killing off
intel_pipe_set_base() and just calling the primary plane
.update_plane() hook. For the immediate problem of black screen after
boot this small patch is enough to hide it.

The problem originates from these two commits:
 commit 3a5f87c286
 Author: Thomas Wood <thomas.wood@intel.com>
 Date:   Wed Aug 20 14:45:00 2014 +0100

    drm: fix plane rotation when restoring fbdev configuration

 commit d91a2cb8e5104233c02bbde539bd4ee455ec12ac
 Author: Sonika Jindal <sonika.jindal@intel.com>
 Date:   Fri Aug 22 14:06:04 2014 +0530

    drm/i915: Add 180 degree primary plane rotation support

Cc: Thomas Wood <thomas.wood@intel.com>
Cc: Sonika Jindal <sonika.jindal@intel.com>
Tested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Tested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-03 11:05:31 +02:00
Andy Shevchenko
a8e9815362 drm: i915: reduce memory footprint when debugging
There is no need to use hex_dump_to_buffer() since we have a kernel helper to
dump up to 64 bytes just via printk(). In our case the actual size is 15 bytes.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
[danvet: Add cast since %*ph expects and int for the size parameter.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-03 11:05:29 +02:00
Ville Syrjälä
6c65a587b1 drm/i915: Don't use WaGsvRC0ResidenncyMethod on chv
WaGsvRC0ResidenncyMethod is for vlv, it doesn't deal with chv
appropriately (eg. doesn't limit rps values to even numbers).

Fix a typo in the w/a name while at it.

Cc: Deepak S <deepak.s@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-03 11:05:27 +02:00